SEARCH · Geology Reports

Results for “Journal of Surveying Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

USGS2007

Application of acoustic doppler velocimeters for streamflow measurements

The U.S. Geological Survey (USGS) principally has used Price AA and Price pygmy mechanical current meters for measurement of discharge. New technologies have resulted in the introduction of alternatives to the Price meters. One alternative, the FlowTracker acoustic Doppler velocimeter, was designed by SonTek/YSI to make streamflow measurements in wadeable conditions. The device measures a point velocity and can be used with standard midsection method algorithms to compute streamflow. The USGS collected 55 quality-assurance measurements with the FlowTracker at 43 different USGS streamflow-gaging stations across the United States, with mean depths from 0.05to0.67m, mean velocities from 13 to 60 cm/s, and discharges from 0.02 to 12.4m3/s. These measurements were compared with Price mechanical current meter measurements. Analysis of the comparisons shows that the FlowTracker discharges were not statistically different from the Price meter discharges at a 95% confidence level. ?? 2007 ASCE.

Journal of Hydraulic Engineering↗

USGS2015

Evaluation of the U.S. Geological Survey standard elevation products in a two-dimensional hydraulic modeling application for a low relief coastal floodplain

Growing use of two-dimensional (2-D) hydraulic models has created a need for high resolution data to support flood volume estimates, floodplain specific engineering data, and accurate flood inundation scenarios. Elevation data are a critical input to these models that guide the flood-wave across the landscape allowing the computation of valuable engineering specific data that provides a better understanding of flooding impacts on structures, debris movement, bed scour, and direction. High resolution elevation data are becoming publicly available that can benefit the 2-D flood modeling community. Comparison of these newly available data with legacy data suggests that better modeling outcomes are achieved by using 3D Elevation Program (3DEP) lidar point data and the derived 1 m Digital Elevation Model (DEM) product relative to the legacy 3 m, 10 m, or 30 m products currently available in the U.S. Geological Survey (USGS) National Elevation Dataset. Within the low topographic relief of a coastal floodplain, the newer 3DEP data better resolved elevations within the forested and swampy areas achieving simulations that compared well with a historic flooding event. Results show that the 1 m DEM derived from 3DEP lidar source provides a more conservative estimate of specific energy, static pressure, and impact pressure for grid elements at maximum flow relative to the legacy DEM data. Better flood simulations are critically important in coastal floodplains where climate change driven storm frequency and sea level rise will contribute to more frequent flooding events.

North Carolina↗

USGS2021

Earthquake risk of gas pipelines in the conterminous United States and its sources of uncertainty

Relatively little research has been conducted to systematically quantify the nationwide earthquake risk of gas pipelines in the US; simultaneously, national guidance is limited for operators across the country to consistently evaluate the earthquake risk of their assets. Furthermore, many challenges and uncertainties exist in a comprehensive seismic risk assessment of gas pipelines. As a first stage in a systematic nationwide assessment, we quantify the earthquake risk of gas transmission pipelines in the conterminous US due to strong ground shaking, including the associated uncertainties. Specifically, we integrate the US Geological Survey 2018 National Seismic Hazard Model, a logic tree–based exposure model, three different vulnerability models, and a consequence model. The results enable comparison against other risk assessment efforts, encourage more transparent deliberation regarding alternative approaches, and facilitate decisions on potentially assessing localized risks due to ground failures that require site-specific data. Based on the uncertainties approximated herein, the resulting sensitivity analyses suggest that the vulnerability model is the most influential source of uncertainty. Finally, we highlight research needs such as (1) developing more vulnerability models for regional seismic risk assessment of gas pipelines; (2) identifying, prioritizing, and measuring input pipeline attributes that are important for estimating seismic damage; and (3) better quantifying seismic hazards with their uncertainties at the national scale, for both ground failures and ground shaking.

conterminous United States↗

USGS2017

Estimated seepage rates from selected ditches, ponds, and lakes at the Camas National Wildlife Refuge, eastern Idaho

The Camas National Wildlife Refuge (Refuge) in eastern Idaho, established in 1937, contains wetlands, ponds, and wet meadows that are essential resting and feeding habitat for migratory birds and nesting habitat for waterfowl. Initially, natural sources of water supported these habitats. However, during the past few decades, changes in climate and surrounding land use have altered and reduced natural groundwater and surface-water inflows, resulting in a 5-meter decline in the water table and an earlier, and more frequent, occurrence of no flow in Camas Creek at the Refuge. Due to these changes in water availability, water management that includes extensive groundwater pumping is now necessary to maintain the wetlands, ponds, and wet meadows. These water management activities have proven to be inefficient and expensive, and the Refuge is seeking alternative water-management options that are more efficient and less expensive. More efficient water management at the Refuge may be possible through knowledge of the seepage rates from ditches, ponds, and lakes at the Refuge. With this knowledge, water-management efficiency may be improved by natural means through selective use of water bodies with the smallest seepage rates or through engineering efforts to minimize seepage losses from water bodies with the largest seepage rates. The U.S. Geological Survey performed field studies in 2015 and 2016 to estimate seepage rates for selected ditches, ponds, and lakes at the Refuge. Estimated seepage rates from ponds and lakes ranged over an order of magnitude, from 3.4 ± 0.2 to 103.0 ± 0.5 mm/d, with larger seepage rates calculated for Big Pond and Redhead Pond, intermediate seepage rates calculated for Two-way Pond, and smaller seepages rates calculated for the south arm of Sandhole Lake. Estimated seepage losses from two reaches of Main Diversion Ditch were 21 ± 2 and 17 ± 2 percent/km. These losses represent seepage rates of about 890 and 860 mm/d, which are one- to two-orders-of-magnitude larger than seepage rates from the ponds and lake. The depth-integrated vertical hydraulic conductivity ( K v ) for sediment underlying the ponds and lake was the primary control of seepage rates. The K v 's were 30 and 34 m/d for Big Pond, 14 and 18 m/d for Toomey Pond, 8 and 10 m/d for Two-way Pond, and 47 m/d for the north arm of Sandhole Lake.

Idaho↗

USGS2011

Observations of debris flows at Chalk Cliffs, Colorado, USA: Part 2, changes in surface morphometry from terrestrial laser scanning in the summer of 2009

High resolution topographic data that quantify changes in channel form caused by sequential debris flows in natural channels are rare at the reach scale. Terrestrial laser scanning (TLS) techniques are utilized to capture morphological changes brought about by a high-frequency of debris-flow events at Chalk Cliffs, Colorado. The purpose of this paper is to compare and contrast the topographic response of a natural channel to the documented debris-flow events. TLS survey data allowed for the generation of high-resolution (2-cm) digital terrain models (DTM) of the channel. A robust network of twelve permanent control points permitted repeat scanning sessions that provided multiple DTM to evaluate fine-scale topographic change associated with three debris-flow events. Difference surfaces from the DTM permit the interpretations of spatial variations in channel morphometry and net volume of material deposited and eroded within and between a series of channel reaches. Each channel reach experienced erosion, deposition, and both net volumetric gains and losses were measured. Analysis of potential relationships between erosion and deposition magnitudes yielded no strong correlations with measures of channel-reach morphometry, suggesting that channel reach-specific predictions of potential erosion or deposition locations or rates cannot be adequately derived from statistical analyses of pre-event channel-reach morphometry.

Colorado↗

USGS2002

Long-term tritium transport through field-scale compacted soil liner

A 13-year study of tritium transport through a field-scale earthen liner was conducted by the Illinois State Geological Survey to determine the long-term performance of compacted soil liners in limiting chemical transport. Two field-sampling procedures (pressure-vacuum lysimeter and core sampling) were used to determine the vertical tritium concentration profiles at different times and locations within the liner. Profiles determined by the two methods were similar and consistent. Analyses of the concentration profiles showed that the tritium concentration was relatively uniformly distributed horizontally at each sampling depth within the liner and thus there was no apparent preferential transport. A simple one-dimensional analytical solution to the advective-dispersive solute transport equation was used to model tritium transport through the liner. Modeling results showed that diffusion was the dominant contaminant transport mechanism. The measured tritium concentration profiles were accurately modeled with an effective diffusion coefficient of 6 ?? 10-4 mm2/s, which is in the middle of the range of values reported in the literature.

Journal of Geotechnical and Geoenvironmental Engin↗

USGS2007

Validation of streamflow measurements made with acoustic doppler current profilers

The U.S. Geological Survey and other international agencies have collaborated to conduct laboratory and field validations of acoustic Doppler current profiler (ADCP) measurements of streamflow. Laboratory validations made in a large towing basin show that the mean differences between tow cart velocity and ADCP bottom-track and water-track velocities were -0.51 and -1.10%, respectively. Field validations of commercially available ADCPs were conducted by comparing streamflow measurements made with ADCPs to reference streamflow measurements obtained from concurrent mechanical current-meter measurements, stable rating curves, salt-dilution measurements, or acoustic velocity meters. Data from 1,032 transects, comprising 100 discharge measurements, were analyzed from 22 sites in the United States, Canada, Sweden, and The Netherlands. Results of these analyses show that broadband ADCP streamflow measurements are unbiased when compared to the reference discharges regardless of the water mode used for making the measurement. Measurement duration is more important than the number of transects for reducing the uncertainty of the ADCP streamflow measurement. ?? 2007 ASCE.

Journal of Hydraulic Engineering↗

USGS2001

Overview of SAX99: Environmental considerations

A 1-km2 area located 2 km off the Florida Pan-handle (30??22.6???N; 86??38.7???W) was selected as the site to conduct high-frequency acoustic seafloor penetration, sediment propagation, and bottom scattering experiments [1]. Side scan, multibeam, and normal incidence chirp acoustic surveys as well as subsequent video surveys, diver observations, and vibra coring, indicate a uniform distribution of surficial and subbottom seafloor characteristics within the area. The site, in 18-19 m of water, is characterized by 1-2-m thick fine-to-medium clean sand and meets the logistic and scientific requirements specified for the acoustic experiments. This paper provides a preliminary summary of the meteorological, oceanographic, and seafloor conditions found during the experiments and describes the important physical and biological process that control the spatial distribution and temporal changes in these characteristics.

IEEE Journal of Oceanic Engineering↗

USGS2012

Geophysical investigations of geology and structure at the Martis Creek Dam, Truckee, California

A recent evaluation of Martis Creek Dam highlighted the potential for dam failure due to either seepage or an earthquake on nearby faults. In 1972, the U.S. Army Corps of Engineers constructed this earthen dam, located within the Truckee Basin to the north of Lake Tahoe, CA for water storage and flood control. Past attempts to raise the level of the Martis Creek Reservoir to its design level have been aborted due to seepage at locations downstream, along the west dam abutment, and at the base of the spillway. In response to these concerns, the U.S. Geological Survey has undertaken a comprehensive suite of geophysical investigations aimed at understanding the interplay between geologic structure, seepage patterns, and reservoir and groundwater levels. This paper concerns the geologic structure surrounding Martis Creek Dam and emphasizes the importance of a regional-scale understanding to the interpretation of engineering-scale geophysical data. Our studies reveal a thick package of sedimentary deposits interbedded with Plio-Pleistocene volcanic flows; both the deposits and the flows are covered by glacial outwash. Magnetic field data, seismic tomography models, and seismic reflections are used to determine the distribution and chronology of the volcanic flows. Previous estimates of depth to basement (or the thickness of the interbedded deposits) was 100 m. Magnetotelluric soundings suggest that electrically resistive bedrock may be up to 2500 m deep. Both the Polaris Fault, identified outside of the study area using airborne LiDAR, and the previously unnamed Martis Creek Fault, have been mapped through the dam area using ground and airborne geophysics. Finally, as determined by direct-current resistivity imaging, time-domain electromagnetic sounding, and seismic refraction, the paleotopography of the interface between the sedimentary deposits and the overlying glacial outwash plays a principal role both in controlling groundwater flow and in the distribution of the observed seepage.

California↗

USGS1986

In situ and laboratory geotechnical tests of the Pierre Shale near Hayes, South Dakota — A characterization of engineering behavior

A geotechnical investigation of the Pierre Shale near Hayes, South Dakota, was conducted by the U.S. Geological Survey as a basis for evaluating problems in deep excavations into that formation. The physical and mechanical properties of the shale were determined through use of core holes drilled to a maximum depth of 184 m. In situ borehole determinations included a gravimeter survey, pressuremeter testing, thermal profile measurements, and borehole velocity measurements. Onsite and offsite laboratory measurements included rebound measurements, sonic velocity measurements of shear and primary waves, X-ray mineralogy and major element determinations, size analyses, fracture analyses, fabric analyses, and determination of thermal properties.Below 15–22 m, the shale is an unweathered, saturated, overconsolidated, underpressured clay shale with a clay-mineral content ranging between 50 and 100%, dominantly composed of mixed-layer illitic smectites. The physical and mechanical properties vary widely. The variation is related to the clay mineral content (especially in bentonite zones), a large transverse mechanical anisotropy, and zones of fractures and microfractures, which may result from rebound caused by erosion. These may contribute to slope instability over large areas. The thermal and mechanical properties change markedly if the shale is permitted to dry out. The state of stress and overconsolidation appear to be functions of the depositional and erosional history of the deposit. Both are markedly affected by the large fracture zones. The properties of the clay shale indicate problems that may be encountered in excavation and use of deep underground facilities. Key words : anisotropy, characterization, clay shale, consolidation state, physical properties, rebound, relaxation, stress state, thermal properties.

South Dakota↗

USGS1997

Reports and maps of the Military Geology Unit, 1942-1975

Included here are reports and maps which were prepared in the Military Geology Unit of the U. S. Geological Survey from 1942 through 1975. In addition to the references prepared primarily for military use and listed here, more than 200 reports of more general geologic interest were prepared for publication as Survey bulletins and professional papers and in outside journals. These reports are listed in "Publications of the Geological Survey" and other bibliographies. Military Geology reports generally include basic subjects such as rock types, soils, water resources, landforms and vegetation, as well as interpretive subjects such as suitability of terrain for cross-country movement and for construction of roads and airfields in areas throughout the world. Reports on specific areas range from generalized texts with small scab maps derived from published sources to detailed texts with large-scale maps commonly based on photo-interpretation and, especially for Alaska and western Pacific islands, involving field mapping. Other reports treat topics of interest in military geology without reference to specific areas. A number of reports covering the moon include the first photogeologic map of the near side. Authors are cited for some kinds of reports; however, many intelligence reports were published anonymously. Most of the reports were prepared by teams made up mainly of geologists but commonly including soils scientists, botanists, climatologists and geographers. Nearly all the soil scientists and climatologists were members of the World Soil Geography Unit, Soil Survey, Soil Conservation Service, U. S. Department of Agriculture. Manuscripts from this Unit were passed through a common review and other processing, as were the manuscripts originating in the Military Geology office, to be issued under the aegis of the latter. In some instances where it has not been possible to list all authors, names of project supervisors are given. File copies of many of the Military Geology reports prepared since 1975 are kept in the Special Geologic Studies Group, U.S. Geological Survey, National Center, Reston, and may be examined there by appropriately cleared persons. Additionally, copies of many of the unclassified studies are in the U.S. Geological Survey Library. Some of the older reports are in the files of the Terrain Analysis Center, Fort Belvoir, Virginia, and other offices within the Corps of Engineers. Most of the reports are out of print and many of the other studies are no longer available.

Open-File Report↗

USGS1968

The relationship of geophysical measurements to engineering and construction parameters in the Straight Creek Tunnel pilot bore, Colorado

Seismic-refraction and electrical-resistivity measurements made along the walls of the Straight Creek Tunnel pilot bore indicate that both a low-velocity and a high-resistivity layer exist in the disturbed rock surrounding the excavation. Seismic measurements were analyzed to obtain the thickness and seismic velocity of rock in the low-velocity layer, the velocity of rock behind the layer and the amplitude of seismic energy received at the detectors. Electrical-resistivity measurements were analyzed to obtain the thickness and electrical resistivity of the high-resistivity layer and the resistivity of rock behind the layer. The electrical resistivity and the seismic velocity of rock at depth, the thickness of rock in the low-velocity layer, and the relative amplitude of seismic energy were correlated against the following parameters, all of which are important in tunnel construction: height of the tension arch, stable vertical rock load, rock quality, rate of construction and cost per foot, percentage of lagging and blocking, set spacing, and type and amount of steel support required, The correlations were statistically meaningful, having correlation coefficients ranging in absolute value from about 0·7 to nearly 1·0. This finding suggests the possibility of predicting parameters of interest in tunnel construction from geophysical measurements made in feeler holes drilled ahead of a working face. Predictions might be based on correlations established either during the early stages of construction or from geophysical surveys in other tunnels of similar design in similar geologic environments.

Colorado↗

USGS2010

Aviation response to a widely dispersed volcanic ash and gas cloud from the August 2008 eruption of Kasatochi, Alaska, USA

The extensive volcanic cloud from Kasatochi's 2008 eruption caused widespread disruptions to aviation operations along Pacific oceanic, Canadian, and U.S. air routes. Based on aviation hazard warnings issued by the National Oceanic and Atmospheric Administration, U.S. Geological Survey, the Federal Aviation Administration, and Meteorological Service of Canada, air carriers largely avoided the volcanic cloud over a 5 day period by route modifications and flight cancellations. Comparison of time coincident GOES thermal infrared (TIR) data for ash detection with Ozone Monitoring Instrument (OMI) ultraviolet data for SO 2 detection shows congruent areas of ash and gas in the volcanic cloud in the 2 days following onset of ash production. After about 2.5 days, the area of SO 2 detected by OMI was more extensive than the area of ash indicated by TIR data, indicating significant ash depletion by fall out had occurred. Pilot reports of visible haze at cruise altitudes over Canada and the northern United States suggested that SO 2 gas had converted to sulfate aerosols. Uncertain about the hazard potential of the aging cloud, airlines coped by flying over, under, or around the observed haze layer. Samples from a nondamaging aircraft encounter with Kasatochi's nearly 3 day old cloud contained volcanic silicate particles, confirming that some fine ash is present in predominantly gas clouds. The aircraft's exposure to ash was insufficient to cause engine damage; however, slightly damaging encounters with volcanic clouds from eruptions of Reventador in 2002 and Hekla in 2000 indicate the possibility of lingering hazards associated with old and/or diffuse volcanic clouds.

Alaska↗

USGS2024

Application of a workflow to determine the feasibility of using simulated streamflow for estimation of streamflow frequency statistics

Streamflow records from hydrologic models are attractive for use in operational hydrology, such as a streamflow frequency analysis. The amount of bias inherent to simulated streamflow from hydrologic models is often unknown, but it is likely present in derivative products. Therefore, a workflow may help determine where streamflow frequency analysis is credibly feasible from simulated streamflow and allow for a systematic way to assess and correct for bias. The proposed workflow consists of hydrologically matching model output locations with streamflow-gauging station (stream gauge) locations, computing the desired statistic from the simulated and observed streamflow record, computing the differences between the simulated and observed statistic (i.e., the bias), and constructing generalized additive models (GAMs) from the differences to determine bias corrections. The US Geological Survey, in cooperation with the Gulf Coast Ecosystem Restoration Council and the US Environmental Protection Agency, is testing the proposed workflow on a low-streamflow frequency (LFF) analysis. Simulated streamflows for the LFF analysis were sourced from a machine-learning model that estimated daily streamflow at Level-12 hydrologic unit code (HUC12) pour points (outlets) in the southern and southeastern US for 1950–2010. The comparison data set consists of 497 stream gauges that are coincident with a HUC12 outlet. The simulated LFF statistics were being overestimated on average; thus, there are limits to using simulated streamflow for frequency analysis. The magnitude of the overprediction generally increases where no-flow conditions are common. Bias corrections determined from the GAMs decreased the magnitude of bias observed in the simulated LFF statistics on average, suggesting it is feasible to expand the operational use of simulated streamflows to frequency analyses with the proposed workflow. The proposed workflow could be advantageous to practitioners interested in leveraging existing and future simulated streamflow data sets with regional and or global coverage.

Journal of Hydrologic Engineering↗

USGS2025

Beach nourishment response and recent morphological evolution of Minnesota Point, Lake Superior

Beach nourishments are a popular nature-based alternative to armoring for shoreline erosion mitigation, but nourishments have been criticized due to their environmental impacts and uncertain sustainability. Monitoring is often nonexistent or insufficient to constrain nourishment longevity and inform the renourishment interval required to maintain shoreline protection. This study uses a combination of topobathymetric surveys, high-resolution satellite-derived shorelines, and coastal engineering analyses to investigate the recent evolution of Minnesota Point and the fate of three beach nourishments constructed adjacent to littoral barriers. We use semi-empirical formulations for sediment compatibility, wave runup, and longshore sediment transport to inform the observed nourishment behavior. Minnesota Point experienced widespread foredune retreat averaging 7±2.8 m from 2009–2019 and 130,000 (70,000–140,000) m 3 of sediment was eroded during this interval. The 2019 nourishment at the Superior Entry was rapidly eroded by strong storms, losing >80% of the added beach width by the following spring. The 2020 and 2021 nourishments at the Duluth Entry retained >80% of the nourishment material at the time of the last topobathymetric survey in the fall of 2022, and satellite-derived shorelines indicate that the beach remained 10 m wider than pre-nourishment conditions at the end of 2023. Modeled longshore transport rates over the period 2009–2022 averaged 11,400 m 3 yr −1 northwestward at the Superior Entry, nearly 3x greater than the 4000 m 3 yr −1 southeastward transport modeled at the Duluth Entry. These observations show that differences in shoreline orientation, littoral sediment supply, and grain size compatibility can lead to contrasting beach nourishment longevities, and this study provides additional measurements of Minnesota Point’s long-term morphological change which can help inform coastal resiliency efforts.

Minnesota, Wisconsin↗

USGS2012

Strain accumulation across the Denali fault in the Delta River canyon, Alaska

Deformation along the Denali fault in the Delta River canyon was determined from geodetic surveys in 1941/1942, 1970, 1975, and 1979. The data were best for the 1975–1979 interval; in that period the average strain accumulation was essentially pure right lateral shear at a rate of 0.6 ± 0.1 μrad/a (a is years) (engineering shear) across a vertical plane striking N87°E. The plane of maximum shear is rotated about 30° counterclockwise from the local strike of the Denali fault but closely coincides with the strike of a major linear segment of the fault that begins 50 km farther west. The deformation between 1941/1942 and 1970 is consistent with a similar rate of strain accumulation if one removes the coseismic strain step contributed by the 1964 Alaska earthquake. The 1970–1975 deformation is poorly defined owing to uncertainties in the 1970 survey, but the strain accumulation during that period is certainly much less than during the 1975–1979 interval. The 1975–1979 strain accumulation is interpreted by means of a dislocation model which suggests that the Denali fault in the vicinity of the Delta River Canyon behaves as a leaky transform fault (i.e., a source of spreading as well as lateral slip). The block south of the Denali fault appears to be moving westward (parallel to the strike of the Denali fault west of the 147th meridian) at the rate of about 20 mm/a relative to the North American plate. Because the linear segment of the Denali fault east of the 147th meridian (along which the geodetic network is located) strikes N63°W, accommodation of the westward motion of the southern block requires some spreading within the fault zone as well as right lateral slip on the fault.

Journal of Geophysical Research Solid Earth↗

USGS2021

Movement of sediment through a burned landscape: Sediment volume observations and model comparisons in the San Gabriel Mountains, California, USA

Post-wildfire changes to hydrologic and geomorphic systems can lead to widespread sediment redistribution. Understanding how sediment moves through a watershed is crucial for assessing hazards, developing debris flow inundation models, engineering sediment retention solutions, and quantifying the role that disturbances play in landscape evolution. In this study, we used terrestrial and airborne lidar to measure sediment redistribution in the 2016 Fish Fire, in the San Gabriel Mountains in southern California, USA. The lidar areas are in two adjacent watersheds, at spatial scales of 900 m 2 to 4 km 2 , respectively. Terrestrial lidar data were acquired prior to rainfall, and two subsequent surveys show erosional change after rainstorms. Two airborne lidar flights occurred (1) 7 months before, and (2) 14 months after the fire ignition, capturing the erosional effects after rainfall. We found hillslope erosion dominated the overall sediment budget in the first rainy season after wildfire. Only 7% of the total erosion came from the active channel bed and channel banks, and the remaining 93% of eroded sediment was derived from hillslopes. Within the channelized portion of the watershed erosion/deposition could be generally described with topographic metrics used in a stream power equation. Observed sediment volumes were compared with four empirical models and one process-based model. We found that the best predictions of sediment volume were obtained from an empirical model developed in the same physiographic region. Moreover, this study showed that post-wildfire erosion rates in the San Gabriel Mountains attain the same magnitude as millennial time scale bedrock erosion rates.

California↗

USGS2007

Integrated geophysical survey in defining subsidence features on a golf course

Subsidence was observed at several places on the Salina Municipal Golf Course in areas known to be built over a landfill in Salina, Kansas. High-resolution magnetic survey (???5400 m2), multi-channel electrical resistivity profiling (three 154 m lines) and microgravity profiling (23 gravity-station values) were performed on a subsidence site (Green 16) to aid in determining boundaries and density deficiency of the landfill in the vicinity of the subsidence. Horizontal boundaries of the landfill were confidently defined by both magnetic anomalies and the pseudo-vertical gradient of total field magnetic anomalies. Furthermore, the pseudo-vertical gradient of magnetic anomalies presented a unique anomaly at Green 16, which provided a criterion for predicting other spots with subsidence potential using the same gradient property. Results of multi-channel electrical resistivity profiling (ERP) suggested the bottom limit of the landfill at Green 16 was around 21 m below the ground surface based on the vertical gradient of electric resistivity and a priori information on the depth of the landfill. ERP results also outlined several possible landfill bodies based on their low resistivity values. Microgravity results suggested a -0.14 g cm-3 density deficiency at Green 16 that could equate to future surface subsidence of as much as 1.5 m due to gradual compaction. ?? 2007 Nanjing Institute of Geophysical Prospecting.

Journal of Geophysics and Engineering↗