Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “International Journal of Environmental Studies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

Selenium, mercury, and their molar ratios in sportfishes from drinking water reservoirs

Mercury (Hg) bioaccumulates in aquatic ecosystems and may pose a risk to humans who consume fish. Selenium (Se) has the ability to reduce Hg toxicity, but the current guidance for human consumption of fish is based on Hg concentration alone. The purpose of the present study was to examine the relationship between Se and Hg in freshwater sportfish, for which there is a paucity of existing data. We collected three species of fish from different trophic positions from two drinking water reservoirs in central North Carolina, USA, to assess Hg and Se concentrations in relation to fish total length and to compare two measures of the protective ability of Se, the Se:Hg molar ratio and Se health benefit value (HBV Se ), to current guidance for Hg. According to the Se:Hg molar ratio, all of the low trophic position fish sampled and the middle trophic position fish sampled from one of the reservoirs were safe for consumption. The same number of fish were considered safe using the HBV Se . More fish were deemed unsafe when using the Se:Hg molar ratio and HBV Se than were considered unsafe when using the U.S. Environmental Protection Agency (USEPA) Hg threshold. These findings suggest that the measures of Se protection may be unnecessarily conservative or that the USEPA Hg threshold may not be sufficiently protective of human health, especially the health of sensitive populations like pregnant or nursing mothers and young children. Future examination of the Se:Hg molar ratio and HBV Se from a variety of fish tissue samples would help refine the accuracy of these measures so that they may be appropriately utilized in ecological and human health risk assessment.

International Journal of Environmental Research an↗

A review of environmental impacts of salts from produced waters on aquatic resources

Salts are frequently a major constituent of waste waters produced during oil and gas production. These produced waters or brines must be treated and/or disposed and provide a daily challenge for operators and resource managers. Some elements of salts are regulated with water quality criteria established for the protection of aquatic wildlife, e.g. chloride (Cl − ), which has an acute standard of 860 mg/L and a chronic standard of 230 mg/L. However, data for establishing such standards has only recently been studied for other components of produced water, such as bicarbonate (HCO 3 − ), which has acute median lethal concentrations (LC50s) ranging from 699 to > 8000 mg/L and effects on chronic toxicity from 430 to 657 mg/L. While Cl− is an ion of considerable importance in multiple geographical regions, knowledge about the effects of hardness (calcium and magnesium) on its toxicity and about mechanisms of toxicity is not well understood. A multiple-approach design that combines studies of both individuals and populations, conducted both in the laboratory and the field, was used to study toxic effects of bicarbonate (as NaHCO 3 ). This approach allowed interpretations about mechanisms related to growth effects at the individual level that could affect populations in the wild. However, additional mechanistic data for HCO 3 − , related to the interactions of calcium (Ca 2 + ) precipitation at the microenvironment of the gill would dramatically increase the scientific knowledge base about how NaHCO 3 might affect aquatic life. Studies of the effects of mixtures of multiple salts present in produced waters and more chronic effect studies would give a better picture of the overall potential toxicity of these ions. Organic constituents in hydraulic fracturing fluids, flowback waters, etc. are a concern because of their carcinogenic properties and this paper is not meant to minimize the importance of maintaining vigilance with respect to potential organic contamination.

International Journal of Coal Geology↗

Development of a global land cover characteristics database and IGBP DISCover from 1 km AVHRR data

Researchers from the U.S. Geological Survey, University of Nebraska-Lincoln and the European Commission's Joint Research Centre, Ispra, Italy produced a 1 km resolution global land cover characteristics database for use in a wide range of continental-to global-scale environmental studies. This database provides a unique view of the broad patterns of the biogeographical and ecoclimatic diversity of the global land surface, and presents a detailed interpretation of the extent of human development. The project was carried out as an International Geosphere-Biosphere Programme, Data and Information Systems (IGBP-DIS) initiative. The IGBP DISCover global land cover product is an integral component of the global land cover database. DISCover includes 17 general land cover classes defined to meet the needs of IGBP core science projects. A formal accuracy assessment of the DISCover data layer will be completed in 1998. The 1 km global land cover database was developed through a continent-by-continent unsupervised classification of 1 km monthly Advanced Very High Resolution Radiometer (AVHRR) Normalized Difference Vegetation Index (NDVI) composites covering 1992-1993. Extensive post-classification stratification was necessary to resolve spectral/temporal confusion between disparate land cover types. The complete global database consists of 961 seasonal land cover regions that capture patterns of land cover, seasonality and relative primary productivity. The seasonal land cover regions were aggregated to produce seven separate land cover data sets used for global environmental modelling and assessment. The data sets include IGBP DISCover, U.S. Geological Survey Anderson System, Simple Biosphere Model, Simple Biosphere Model 2, Biosphere-Atmosphere Transfer Scheme, Olson Ecosystems and Running Global Remote Sensing Land Cover. The database also includes all digital sources that were used in the classification. The complete database can be sourced from the website: http://edcwww.cr.usgs.gov/landdaac/glcc/glcc.html.

International Journal of Remote Sensing↗

Changing patterns of Pennsylvanian coal-swamp vegetation and implications of climatic control on coal occurrence

Improved regional and interregional stratigraphic correlations of Pennsylvanian strata permit comparisons of vegetational changes in Euramerican coal swamps. The coal-swamp vegetation is known directly from in situ coal-ball peat deposits from more than 65 coals in the United States and Europe. Interpretations of coal-swamp floras on the basis of coal-ball peat studies are extended to broader regional and stratigraphic patterns by use of coal palynology. Objectives of the quantitative analyses of the vegetation in relation to coal are to determine the botanical constituents at the peat stage and their environmental implications for plant growth and peat accumulation. Morphological and paleoecological analyses provide a basis for deducing freshwater regimes of coal swamps. Changes in composition of Pennsylvanian coal-swamp vegetation are quire similar from one paralic coal region to another and show synchrony that is attributable to climate. Paleobotany and paleogeography of the Euramerican province indicate a moist tropical paleoclimate. Rainfall, runoff and evapotranspiration were the variable climatic controls in the distribution of coal-swamp vegetation, peat accumulation and coal resources. In relative terms of climatic wetness the Pennsylvanian Period is divisible into five intervals, which include two relatively drier intervals that developed during the Lower-Middle and Middle-Upper Pennsylvanian transitions. The climate during Early Pennsylvanian time was moderately wet and the median in moisture availability. Early Middle Pennsylvanian was drier, probably seasonally dry-wet; late Middle Pennsylvanian was the wettest in the Midcontinent; early Late Pennsylvanian was the driest; and late Late Pennsylvanian was probably the wettest in the Dunkard Basin. The five climatic intervals represent a general means of dividing coal resources within each region into groups with similar botanical constituents and environments of peat accumulation. Regional differences in basinal geology and climate were significant variables, but the synchronous control of paleoclimate was of primary importance.

International Journal of Coal Geology↗

Geochemistry of environmentally sensitive trace elements in Permian coals from the Huainan coalfield, Anhui, China

To study the geochemical characteristics of 11 environmentally sensitive trace elements in the coals of the Permian Period from the Huainan coalfield, Anhui province, China, borehole samples of 336 coals, two partings, and four roof and floor mudstones were collected from mineable coal seams. Major elements and selected trace elements were determined by inductively coupled plasma optical emission spectrometry (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS), and hydride generation atomic absorption spectrometry (HAAS). The depositional environment, abundances, distribution, and modes of occurrence of trace elements were investigated. Results show that clay and carbonate minerals are the principal inorganic constituents in the coals. A lower deltaic plain, where fluvial channel systems developed successively, was the likely depositional environment of the Permian coals in the Huainan coalfield. All major elements have wider variation ranges than those of Chinese coals except for Mg and Fe. The contents of Cr, Co, Ni, and Se are higher than their averages for Chinese coals and world coals. Vertical variations of trace elements in different formations are not significant except for B and Ba. Certain roof and partings are distinctly higher in trace elements than underlying coal bench samples. The modes of occurrence of trace elements vary in different coal seams as a result of different coal-forming environments. Vanadium, Cr, and Th are associated with aluminosilicate minerals, Ba with carbonate minerals, and Cu, Zn, As, Se, and Pb mainly with sulfide minerals.

Huainan coalfield↗

Investigation of recent decadal-scale cyclical fluctuations in salinity in the lower Colorado river

Beginning in the late 1970s, 10- to 15-year cyclical oscillations in salinity were observed at lower Colorado River monitoring sites, moving upstream from the international border with Mexico, above Imperial Dam, below Hoover Dam, and at Lees Ferry. The cause of these cyclical trends in salinity was unknown. These salinity cycles complicate the U.S. Bureau of Reclamation's (Reclamation) responsibility for managing salinity in the river for delivery of water to Mexico to meet treaty obligations. This study develops a conceptual model of the salinity cycles from time-series water quality, streamflow, and precipitation data in both the lower and upper Colorado River Basins in order to provide Reclamation the ability to understand, anticipate, and manage future salinity cycles in the lower river. Compared with the Lees Ferry record, both maximum and minimum salinity levels increase downstream by about 25% at Hoover Dam, by about 49% at Imperial Dam, and by about 69% at the northern international boundary with Mexico. In the upper basin, cyclical salinity trends are evident at the outflow of three major tributaries, where salinity is also noted to be inversely related to streamflow. Time series trends in precipitation within the catchments of the three upper basin tributaries indicate cyclical periods with above normal precipitation and periods with below normal precipitation. Periods of greater than normal precipitation in the contributing areas correspond with declines in salinity at the catchment monitoring sites and periods of less than normal precipitation correspond with rising salinity at the sites. Based on the conceptual model developed in this investigation, a multiple linear regression model was developed using a stepwise variable selection procedure to simulate salinity in Lake Powell inflow. Important variables in the explanation of salinity entering Lake Powell include flow from the three upper basin tributaries, seasonality, and mean precipitation in the upper basin, among others. The root mean square error of prediction for the MLR model was 31.48 mg/L (5.7%).

Arizona, Colorado, Nevada, New Mexico, Utah, Wyomi↗

Decision analysis of Integrated Pest Management: A case study on invasive sea lamprey in the Great Lakes Basin

Integrated Pest Management (IPM) provides a powerful framework for addressing threats to human well-being caused by nuisance species including invasives. We examined the hypothesis that adaptive management could erode barriers to IPM implementation by developing a decision-analytic adaptive management framework for invasive sea lamprey ( Petromyzon marinus ) IPM in the Laurentian Great Lakes of North America. The framework addressed objectives associated with coordinating multiple sea lamprey control actions at the regional scale and objectives associated with internal validity of control actions. We reduced the scope of possible management actions by orders of magnitude to the set of 6432 alternatives expected to be both socially acceptable and technically feasible. Using utility theory, we identified the management actions that optimized expected utility for all possible objective weighting schemes that considered tradeoffs between maximizing learning about control tactic efficacy and minimizing cost to the IPM program. Sensitivity analyses revealed that assumptions about the social acceptability of deploying electric weirs to control invasive sea lamprey influenced selection of the optimal control action, suggesting that resolving this source of uncertainty through iterative application of the framework may lead to improved sea lamprey control outcomes. Overall, we found that adaptive management enabled learning processes useful for overcoming barriers to IPM of invasive sea lamprey. It formalized learning about sea lamprey control tactic efficacy as an objective of the IPM institution, questioned previously held assumptions about what constitutes a viable control strategy, and enabled a management experiment with temporal and spatial replication.

Michigan, Ontario, Wisconsin↗

Acid rain publications by the U.S. Fish and Wildlife Service, 1979-1989

Pollution of aquatic and terrestrial ecosystems has been a concern to society since the burning of fossil fuels began in the industrial revolution. In the past decade or so, this concern has been heightened by evidence that chemical transformation in the atmosphere of combustion by-products and subsequent long-range transport can cause environmental damage in remote areas. The extent of this damage and the rates of ecological recovery were largely unknown. "Acid rain" became the environmental issue of the 1980's. To address the increasing concerns of the public, in 1980 the Federal government initiated a 10-year interagency research program to develop information that could be used by the President and the Congress in making decisions for emission controls. The U.S. Fish and Wildlife Service has been an active participant in acid precipitation research. The Service provided support to a number of scientific conferences and forums, including the Action Seminar on Acid Precipitation held in Toronto, Canada, in 1979, an international symposium on Acidic Precipitation and Fishery Impacts in Northeastern North America in 1981, and a symposium on Acidic Precipitation and Atmospheric Deposition: A Western Perspective in 1982. These meetings as well as the growing involvement with the government's National Acidic Precipitation Assessment Program placed the Service in the lead in research on the biological effects of acidic deposition. Research projects have encompassed water chemistry, aquatic invertebrates, amphibians, fish, and waterfowl. Water quality surveys have been conducted to help determine the extent of acid precipitation effects in the northeast, Middle Atlantic, and Rocky Mountain regions. In addition to lake and stream studies, research in wetland and some terrestrial habitats has also been conducted. Specific projects have addressed important sport species such as brook trout (Salvelinus fontinalis), Atlantic salmon (Salmo salar), and striped bass (Morone saxatilis). Trace metal accumulation in fish has been investigated and a symposium sponsored on related work. U.S> Fish and Wildlife Service scientists serve as advisors and participants in research being conducted by industry, nonprofit groups, State and other Federal agencies. Researcher have worked closely with colleagues in Canada, England, Norway, Scotland, the Soviet Union, and Sweden to gain additional understanding of the problem. In 1982, the Service implemented a mitigation research program to provide resource managers with information to help them protect sensitive ecosystems, and rehabilitation methods for resources already affected by acidification. An international workshop was convened to outline the research needs. Several conferences were organized to develop appropriate field and laboratory procedures. Scientists with the mitigation research program are evaluating the ecological effects of liming (addition of base material) surface waters and surrounding watershed to provide buffering against acidic inputs. Through long-term cooperative project with States and other organizations, investigations are studying possible abatement methods for regions most affected by acidic deposition. To date, more than 200 reports the describe these studies have been published. These products include conference proceedings, journal articles, and in-house scientific publications. An education poster describing the effects of acid rain on aquatic ecosystems was developed and distributed to individuals, conservations and State organizations, and the public education system. This annotated bibliography lists current publications by Service authors, cooperators, or contractors on acid rain and related quality. Entire are arranged alphabetically by author surname. For further information about the research program, contact the U.S. Fish and Wildlife Service, Acid Precipitation Section, National Fishery Research Center -- Leetown, Box 700, Kearneysville, WV 25430.

Biological Report↗

Tissue distribution and immunomodulation in channel catfish (Ictalurus punctatus) following dietary exposure to polychlorinated biphenyl Aroclors and food deprivation

Although most countries banned manufacturing of polychlorinated biphenyls (PCBs) over 40 years ago, PCBs remain a global concern for wildlife and human health due to high bioaccumulation and biopersistance. PCB uptake mechanisms have been well studied in many taxa; however, less is known about depuration rates and how post-exposure diet can influence PCB concentrations and immune response in fish and wildlife populations. In a controlled laboratory environment, we investigated the influence of subchronic dietary exposure to two PCB Aroclors and food deprivation on tissue-specific concentrations of total PCBs and PCB homologs and innate immune function in channel catfish ( Ictalurus punctatus ). Overall, we found that the concentration of total PCBs and PCB homologs measured in whole body, fillet, and liver tissues declined more slowly in food-deprived fish, with slowest depuration observed in the liver. Additionally, fish that were exposed to PCBs had lower plasma cortisol concentrations, reduced phagocytic oxidative burst activity, and lower cytotoxic activity, suggesting that PCBs can influence stress and immune responses. However, for most measures of immune function, the effects of food deprivation had a larger effect on immune response than did PCB exposure. Taken together, these results suggest that short-term dietary exposure to PCBs can increase toxicity of consumable fish tissues for several weeks, and that PCB mixtures modulate immune and stress responses via multiple pathways. These results may inform development of human consumption advisories and can help predict and understand the influence of PCBs on fish health.

International Journal of Environmental Research an↗

A hydrologic perspective of major U.S. droughts

Drought is a recurring natural hazard that has substantial human and environmental impacts. Given continued global warming and associated climate change, there is concern that droughts could become more severe and longer lasting. To better monitor and understand drought development and persistence, it is helpful to understand the development and climatic drivers of past droughts. In this study we use monthly runoff percentiles to identify five major drought events in the conterminous United States (CONUS) from 1901 through 2020. For each drought event we examined spatial patterns of departures of mean monthly precipitation, temperature, soil moisture storage, and runoff for 2,107 hydrologic units (HUs) across the CONUS. Results indicated that precipitation deficits have been the primary driver of past major-drought events and temperature a secondary driver, even of the most recent drought event (September 1999 through September 2015) when positive temperature anomalies occurred over most of the CONUS. Additionally, negative soil moisture storage departures were more negative than runoff departures during the five drought events we examined, which emphasizes the importance of measuring both runoff and soil moisture to monitor drought conditions. We also examined the use of statistical persistence to develop short-term (i.e., 1 month) forecasts of runoff drought conditions in the CONUS by developing autoregressive integrated moving average (ARIMA) models for each HU. Results indicated that persistence can be used to predict short-term changes in the spatial pattern of drought and the areal extent of drought, but that predictions of runoff magnitude for any particular site are often poor.

International Journal of Climatology↗

Predicting methane emissions and developing reduction strategies for a Central Appalachian Basin, USA, longwall mine through analysis and modeling of geology and degasification system performance

Coal mine methane is a safety concern in active mines due to explosion risk and an environmental concern due to the greenhouse gas (GHG) properties of methane emissions to the atmosphere. Depending on the mine design and operation, structural and stratigraphic characteristics of the geology, and the properties of coal beds affected by mining, a significant amount of methane can be released during coal extraction. These emissions may be low and uniform, but they also can be high and abrupt, if not captured by using pre- and post-mining methods of degasification or not controlled by ventilation during mining. Therefore, emissions should be monitored and predicted accurately for underground safety and GHG reduction. Ventilation and degasification systems should be designed accordingly by taking into account the mine geological properties and the degasification system's performance. This paper presents a comprehensive study to predict emissions and proposes alternatives to reduce emissions in a longwall mine extracting metallurgical coal from the Pocahontas No. 3 coal bed in Virginia (Central Appalachian Basin), USA. The work focused on mining activity in four adjacent panels through analysis and modeling of geology and evaluation of the performance of the methane control system. Results showed that the mine geology contained a significant amount of gas within and around the panel areas, which was controlled by utilizing different degasification methods besides ventilation during mining. The study showed that after pre-mining degasification using fractured vertical wells and in-seam horizontal wells, each panel potentially contained ∼19 MMscf and ∼ 2 MMscf of gas remaining to be handled by the gob gas ventholes (GGVs) and the ventilation, respectively, per acre of mining. It was shown that extending the pre-mining degasification duration of vertical wells by as much as 4 years or drilling more horizontal wells with closer spacing could significantly reduce ventilation and gob emissions during the mining of coal.

Kentucky, Virginia, West Virginia↗

Annotated bibliography of scientific research relevant to oil and gas reclamation best management practices in the western United States, published from 1969 through 2020

Integrating recent scientific knowledge into management decisions supports effective natural resource management and can lead to better resource outcomes. However, finding and accessing scientific knowledge can be time consuming and costly. To assist in this process, the U.S. Geological Survey has created a series of annotated bibliographies on topics of management concern for lands in the western United States (U.S.). Oil and gas development on public lands is a long-standing and substantial component of local and regional economies and has expanded in recent decades, particularly on public lands in the western U.S. This development is associated with extensive networks of pipelines, roads, and processing facilities, across which reclamation is Federally mandated following initial well pad development (“interim” reclamation) and once resource extraction is complete (“final” reclamation). Reclamation is critical for recovering ecological services to energy-affected lands, including vegetation productivity, wildlife habitat, water and air quality, and soil stability (for example, resistance to wind and water erosion). However, reclamation of oil and gas affected lands in the western U.S. has proved challenging due to an array of regulatory and environmental factors, such as minimally developed soils, short growing seasons, herbivory, high winds, invasive species, rugged terrain, and in particular, arid climates associated with low total precipitation, high evapotranspiration rates, and highly variable precipitation patterns. We compiled and summarized journal articles, government reports, technical reports, proceedings, and theses and dissertations relevant to oil and gas reclamation. We constrained our search to products published on or before December 31, 2020 but did not limit our search by a starting date; the earliest product resulting from this effort was published in March 1969. Second, we manually scanned the last 15 years (2005-2020) of tables of contents in journals, bibliographies, and proceedings of which we were aware would contain articles highly relevant to this bibliography. We carried out the search for these products through multiple means: (1) performing a structured search of two reference databases, (2) examining articles published since 2005 in highly relevant scientific journals and conference proceedings, and (3) reviewing additional material suggested by authors of products identified in steps 1 and 2. Our search was intentionally broad in order to identify as much relevant work as possible, much of which is professionally applied and tested within the industry of oil and gas reclamation, but which remains unpublished in scientific journals. We refined the initial list of products by removing: (1) duplicates, (2) products not written in English, (3) products that were not relevant to the arid ecosystems of western North America, (4) products that were not released as research, data products, or review articles in journals or as formal scientific reports, and (5) products with data which were not relevant to reclamation of oil and gas-affected lands, or for which the study did not present new data, findings, or syntheses relevant to reclamation of oil and gas-affected lands. We summarized each product using a consistent structure (background, objectives, methods, location, findings, and implications) and assigned standardized management topics to each. Management topics are intended to aid online searching within the bibliography and are described in more detail in the Methods Section of this report; they include what type of disturbance the product addresses (well pads, mining, pipelines), what aspect of oil and gas reclamation they pertain to (practices, standards, monitoring), what type of data are present in the product (for instance soil or vegetation recovery data), and an indication if the product were from a source other than a published, peer-reviewed outlet (such as dissertations or unpublished professional reports – these are identified as grey literature). The review process for this annotated bibliography included an initial internal colleague review of each summary, requesting input on each summary from an author of the original product, and a formal peer-review. Our initial searches resulted in 3,197 total products, of which 290 met our criteria for inclusion. “Reclamation Practices” is by far the management topic most addressed, followed by “Reclamation Monitoring,” for example, products assessing what and how monitoring methods are used to track and measure reclamation outcome. This document may be accessed at https://doi.org/10.3133/ofr20231068 or from the U.S. Geological Survey Publication Warehouse ( https://pubs.usgs.gov/ ). The 1-page product summaries herein will also be used to create a bibliography at https://apps.usgs.gov/science-for-resource-managers that includes links to each original product, where available, and in which subject matter will be searchable by topic, location, and year. The studies compiled and summarized here may inform planning and management actions that seek to reclaim landscapes across the western U.S. which have been affected by oil and gas development.

Open-File Report↗

A 1500-year record of climatic and environmental change in Elk Lake, Clearwater County, Minnesota II: Geochemistry, mineralogy, and stable isotopes

Most of the sediment components that have accumulated in Elk Lake, Clearwater County, northwestern Minnesota, over the past 1500 years are authigenic or biogenic (CaCO3, biogenic SiO2, organic matter, iron and manganese oxyhydroxides, and iron phosphate) and are delivered to the sediment-water interface on a seasonal schedule where they are preserved as distinct annual laminae (varves). The annual biogeochemical cycles of these components are causally linked through the 'carbon pump', and are recapitulated in longer-term cycles, most prominently with a periodicity of about 400 years. Organic carbon is fixed in the epilimnion by photosynthetic removal of CO2, which also increases the pH, triggering the precipitation of CaCO3. The respiration and degradation of fixed organic carbon in the hypolimnion consumes dissolved oxygen, produces CO2, and lowers the pH so that the hypolimnion becomes anoxic and undersaturated with respect to CaCO3 during the summer. Some of the CaCO3 produced in the epilimnion is dissolved in the anoxic, lower pH hypolimnion and sediments. The amount of CaCO3 that is ultimately incorporated into the sediments is a function of how much is produced in the epilimnion and how much is consumed in the hypolimnion and the sediments. Iron, manganese, and phosphate accumulate in the anoxic hypolimnion throughout the summer. Sediment-trap studies show that at fall overturn, when iron-, manganese-, and phosphate-rich bottom waters mix with carbonate- and oxygen-rich surface waters, precipitation of iron and manganese oxyhydroxides, iron phosphate, and manganese carbonate begins and continues into the winter months. Detrital clastic material in the sediments of Elk Lake deposited over the last 1500 years is a minor component (<10% by weight) that is mostly wind-borne (eolian). Detailed analyses of the last 1500 years of the Elk Lake sediment record show distinct cycles in eolian clastic variables (e.g. aluminum, sodium, potassium, titanium, and quartz), with a periodicity of about 400 years. The 400-yr cycle in eolian clastic material does not correspond to the 400-yr cycles in redox-sensitive authigenic components, suggesting that the clastic component is responding to external forcing (wind) whereas the authigenic components are responding to internal forcing (productivity), although both may ultimately be forced by climate change. Variations in the oxygen and carbon isotopic composition of CaCO3 are small but appear to reflect small variations in ground water influx that are also driven by external forcing.

Journal of Paleolimnology↗

The impacts of cover crop biomass on satellite-based detectability of cover crops in Maryland

Cover crop adoption in the U.S. has increased over the past decades, increasing the need to quantify their performance and environmental benefits. While remote sensing (RS)-based approaches for detecting cover crop presence have been developed, there has been limited research on how cover crops with varied biomass and management practices influence detectability. Using unique field-level cover crop presence and biomass datasets in Maryland, U.S., we investigated how RS-based detectability changes for cover crops with varied aboveground biomass, planting, and termination dates. Specifically, we proposed a time-integrated satellite-based greenness feature from Harmonized Landsat-8 and Sentinel-2 (HLS) time series from 2017 to 2021 to estimate biomass of cover crops and evaluated their detectability using a phenology-based cover crop detection framework. The impacts of cover crop planting and termination dates on cover crop biomass were also analyzed. Our results demonstrated that Normalized Difference Vegetation Index (NDVI) estimated biomass with higher accuracy compared to other vegetation indices, and the time-integrated model estimated biomass with higher accuracy than the single-date “snapshot” linear model (R2 from 0.53 to 0.66 and RMSE from 922 kg/ha to 747 kg/ha). While the snapshot models were species sensitive, the time-integrated models showed strong robustness across different species. Detectability increased with cover crop biomass, as detected cover crops averaged 963.3 ±719.5 kg/ha compared to 297.2 ± 209.0 kg/ha for non-detected cover crops. Detection accuracy reached 96.1% for fields exceeding 500 kg/ha, compared with an overall accuracy of 62.7%. Earlier planting and later termination increased biomass and detectability, with biomass rising by 4.14 kg/ha/day (p < 0.01). This study demonstrates how management practices affect cover crop biomass and detectability via satellite time series and provides insights that can inform management of cover crops and monitoring of their effects on agroecosystems.

Maryland↗

Methane hydrates in nature - Current knowledge and challenges

Recognizing the importance of methane hydrate research and the need for a coordinated effort, the United States Congress enacted the Methane Hydrate Research and Development Act of 2000. At the same time, the Ministry of International Trade and Industry in Japan launched a research program to develop plans for a methane hydrate exploratory drilling project in the Nankai Trough. India, China, the Republic of Korea, and other nations also have established large methane hydrate research and development programs. Government-funded scientific research drilling expeditions and production test studies have provided a wealth of information on the occurrence of methane hydrates in nature. Numerous studies have shown that the amount of gas stored as methane hydrates in the world may exceed the volume of known organic carbon sources. However, methane hydrates represent both a scientific and technical challenge, and much remains to be learned about their characteristics and occurrence in nature. Methane hydrate research in recent years has mostly focused on: (1) documenting the geologic parameters that control the occurrence and stability of methane hydrates in nature, (2) assessing the volume of natural gas stored within various methane hydrate accumulations, (3) analyzing the production response and characteristics of methane hydrates, (4) identifying and predicting natural and induced environmental and climate impacts of natural methane hydrates, (5) analyzing the methane hydrate role as a geohazard, (6) establishing the means to detect and characterize methane hydrate accumulations using geologic and geophysical data, and (7) establishing the thermodynamic phase equilibrium properties of methane hydrates as a function of temperature, pressure, and gas composition. The U.S. Department of Energy (DOE) and the Consortium for Ocean Leadership (COL) combined their efforts in 2012 to assess the contributions that scientific drilling has made and could continue to make to advance our understanding of methane hydrates in nature. COL assembled a Methane Hydrate Project Science Team with members from academia, industry, and government. This Science Team worked with COL and DOE to develop and host the Methane Hydrate Community Workshop, which surveyed a substantial cross section of the methane hydrate research community for input on the most important research developments in our understanding of methane hydrates in nature and their potential role as an energy resource, a geohazard, and/or as an agent of global climate change. Our understanding of how methane hydrates occur in nature is still growing and evolving, and it is known with certainty that field, laboratory, and modeling studies have contributed greatly to our understanding of hydrates in nature and will continue to be a critical source of the information needed to advance our understanding of methane hydrates.

Journal of Chemical and Engineering Data↗

Organic substances in produced and formation water from unconventional natural gas extraction in coal and shale

Organic substances in produced and formation water from coalbed methane (CBM) and gas shale plays from across the USA were examined in this study. Disposal of produced waters from gas extraction in coal and shale is an important environmental issue because of the large volumes of water involved and the variable quality of this water. Organic substances in produced water may be environmentally relevant as pollutants, but have been little studied. Results from five CBM plays and two gas shale plays (including the Marcellus Shale) show a myriad of organic chemicals present in the produced and formation water. Organic compound classes present in produced and formation water in CBM plays include: polycyclic aromatic hydrocarbons (PAHs), heterocyclic compounds, alkyl phenols, aromatic amines, alkyl aromatics (alkyl benzenes, alkyl biphenyls), long-chain fatty acids, and aliphatic hydrocarbons. Concentrations of individual compounds range from < 1 to 100 μg/L, but total PAHs (the dominant compound class for most CBM samples) range from 50 to 100 μg/L. Total dissolved organic carbon (TOC) in CBM produced water is generally in the 1–4 mg/L range. Excursions from this general pattern in produced waters from individual wells arise from contaminants introduced by production activities (oils, grease, adhesives, etc.). Organic substances in produced and formation water from gas shale unimpacted by production chemicals have a similar range of compound classes as CBM produced water, and TOC levels of about 8 mg/L. However, produced water from the Marcellus Shale using hydraulic fracturing has TOC levels as high as 5500 mg/L and a range of added organic chemicals including, solvents, biocides, scale inhibitors, and other organic chemicals at levels of 1000 s of μg/L for individual compounds. Levels of these hydraulic fracturing chemicals and TOC decrease rapidly over the first 20 days of water recovery and some level of residual organic contaminants remain up to 250 days after hydraulic fracturing. Although the environmental impacts of the organics in produced water are not well defined, results suggest that care should be exercised in the disposal and release of produced waters containing these organic substances into the environment because of the potential toxicity of many of these substances.

International Journal of Coal Geology↗

Carbon dioxide enhanced oil recovery performance according to the literature

Introduction The need to increase the efficiency of oil recovery and environmental concerns are bringing to prominence the use of carbon dioxide (CO 2 ) as a tertiary recovery agent. Assessment of the impact of flooding with CO 2 all eligible reservoirs in the United States not yet undergoing enhanced oil recovery (EOR) requires making the best possible use of the experience gained in 40 years of applications. Review of the publicly available literature has located relevant CO 2 -EOR information for 53 units (fields, reservoirs, pilot areas) in the United States and 17 abroad. As the world simultaneously faces an increasing concentration of CO 2 in the atmosphere and a higher demand for fossil fuels, the CO 2 -EOR process continues to gain popularity for its efficiency as a tertiary recovery agent and for the potential for having some CO 2 trapped in the subsurface as an unintended consequence of the enhanced production (Advanced Resources International and Melzer Consulting, 2009). More extensive application of CO 2 -EOR worldwide, however, is not making it significantly easier to predict the exact outcome of the CO 2 flooding in new reservoirs. The standard approach to examine and manage risks is to analyze the intended target by conducting laboratory work, running simulation models, and, finally, gaining field experience with a pilot test. This approach, though, is not always possible. For example, assessment of the potential of CO 2 -EOR at the national level in a vast country such as the United States requires making forecasts based on information already available. Although many studies are proprietary, the published literature has provided reviews of CO 2 -EOR projects. Yet, there is always interest in updating reports and analyzing the information under new perspectives. Brock and Bryan (1989) described results obtained during the earlier days of CO 2 -EOR from 1972 to 1987. Most of the recovery predictions, however, were based on intended injections of 30 percent the size of the reservoir’s hydrocarbon pore volume (HCPV), and the predictions in most cases badly missed the actual recoveries because of the embryonic state of tertiary recovery in general and CO 2 flooding in particular at the time. Brock and Bryan (1989), for example, reported for the Weber Sandstone in the Rangely oil field in Colorado, an expected recovery of 7.5 percent of the original oil in place (OOIP) after injecting a volume of CO 2 equivalent to 30 percent of the HCPV, but Clark (2012) reported that after injecting a volume of CO 2 equivalent to 46 percent of the HCPV, the actual recovery was 4.8 percent of the OOIP. Decades later, the numbers by Brock and Bryan (1989) continue to be cited as part of expanded reviews, such as the one by Kuuskraa and Koperna (2006). Other comprehensive reviews including recovery factors are those of Christensen and others (2001) and Lake and Walsh (2008). The Oil and Gas Journal (O&GJ) periodically reports on active CO 2 -EOR operations worldwide, but those releases do not include recovery factors. The monograph by Jarrell and others (2002) remains the most technically comprehensive publication on CO 2 flooding, but it does not cover recovery factors either. This chapter is a review of the literature found in a search for information about CO 2 -EOR. It has been prepared as part of a project by the U.S. Geological Survey (USGS) to assess the incremental oil production that would be technically feasible by CO 2 flooding of all suitable oil reservoirs in the country not yet undergoing tertiary recovery.

Scientific Investigations Report↗

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology↗