Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Scanning”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources

Aerial tracking of radio-marked white-tailed tropicbirds over the Caribbean Sea

We radio-marked nesting white-tailed tropicbirds at Culebra National Wildlife Refuge, Puerto Rico, and tracked them from a Cessna 182 during flights over the open sea. Locations of the birds were determined using standard aerial telemetry techniques for side-facing Yagi antennas. We used strut-mounted, 4-element Yagi antennas connected to a switchbox and scanning receiver. By recording bearing and distance from at least 1 of 3 aeronautical navigation beacons, the position of the aircraft and the bird could be estimated with an error of about 2 km. On several occasions we plotted the general heading of a bird and then relocated and tracked the same bird on the following day. Our method of aerial tracking and navigation was useful for tracking birds over the sea to at least 116 km from the breeding colony

Book chapter↗

Density and habitat of breeding Swallow-tailed Kites in the lower Suwannee ecosystem, Florida

Historically the Swallow-tailed Kite (Elanoides forficatus) bred in the United States in at least 16 eastern states. Currently it is restricted to seven southeastern states, with most of its breeding range in Florida. Breeding Bird Surveys indicate a declining trend for this Neotropical migrant in most of Florida. Using a rapid survey technique at the Lower Suwannee NWR on 25-27 Mar. 1997, we scanned for kites from 16 sampling stations above the forest canopy, using 10X binoculars for 45 min per station. An effective detection distance of 2.4 km provided almost complete coverage of kite habitat (excluding salt marsh) on the refuge (14,620 ha) and in a 1.6-km buffer (13,526 ha). A mobile observation platform, extended to heights of 30-34 m provided an unobstructed view above the forest canopy where foraging bouts, feeding, courtship displays, and other activities by this species occur. This technique was found to be efficient in obtaining an estimate of potential breeding pairs. An estimated 19 breeding pairs were observed, with possibly five additional pairs, a density of at least one pair per 1173-1407 ha. There was no opportunity to search for nests so we were unable to correlate number of active nests with the number of kites observed, and linear nature of study area might concentrate birds, including nonbreeders, so our density of kites may or may not be typical for other areas. The refuge has a mosaic of 11 different habitats (7 forest types, freshwater and salt marshes, open water and urban/suburban) providing much linear edge to the matrix of different plant communities that range in height from less than 1 m to greater than 30 m. Such structure provides quality habitat for Swallow-tailed Kites.

Journal of Field Ornithology↗

Cartography for lunar exploration: 2008 status and mission plans

The initial spacecraft exploration of the Moon in the 1960s-70s yielded extensive data, primarily in the form of film and television images, which were used to produce a large number of hardcopy maps by conventional techniques. A second era of exploration, beginning in the early 1990s, has produced digital data including global multispectral imagery and altimetry, from which a new generation of digital map products tied to a rapidly evolving global control network has been made. Efforts are also underway to scan the earlier hardcopy maps for online distribution and to digitize the film images so that modern processing techniques can be used to make high-resolution digital terrain models (DTMs) and image mosaics consistent with the current global control. The pace of lunar exploration is accelerating dramatically, with as many as eight new missions already launched or planned for the current decade. These missions, of which the most important for cartography are SMART-1 (Europe), Kaguya/SELENE (Japan), Chang'e-1 (China), Chandrayaan-1 (India), and Lunar Reconnaissance Orbiter (USA), will return a volume of data exceeding that of all previous lunar and planetary missions combined. Framing and scanner camera images, including multispectral and stereo data, hyperspectral images, synthetic aperture radar (SAR) images, and laser altimetry will all be collected, including, in most cases, multiple data sets of each type. Substantial advances in international standardization and cooperation, development of new and more efficient data processing methods, and availability of resources for processing and archiving will all be needed if the next generation of missions are to fulfill their potential for high-precision mapping of the Moon in support of subsequent exploration and scientific investigation.

The International Archives of the Photogrammetry, ↗

THEMATIC MAPPER: DETAILED RADIOMETRIC AND GEOMETRIC CHARACTERISTICS.

The paper is in abstract form. It discusses those radiometric characteristics of the Landsat 4 Thematic Mapper (TM) that can be established without absolute calibration or spectral data. Subscenes of radiometrically raw data (B-data) were examined on an individual detector basis; areas of uniform radiance were used to characterize subtle radiometric differences and noise problems. The effective resolution in radiance is degraded by about a factor of two by irregular width of the digital levels. Several detectors have a change of gain with a period of several scans, the largest effect is about 4%. The geometric fidelity of the GSFC filmwriter used for Thematic Mapper (TM) images was assessed by measurement with accuracy better than three micrometers of a test grid.

Conference Paper↗

Photogrammetry of the Viking-Lander imagery.

We have solved the problem of photogrammetric mapping from the Viking Lander photography in two ways: 1) by converting the azimuth and elevation scanning imagery to the equivalent of a frame picture by means of computerized rectification; and 2) by interfacing a high-speed, general-purpose computer to the AS-11A analytical plotter so that all computations of corrections can be performed in real time during the process of model orientation and map compilation. Examples are presented of photographs and maps of Earth and Mars. -from Authors

Photogrammetric Engineering and Remote Sensing↗

ORIGIN OF QUARTZ IN COAL.

Both a scanning electron microscope and an electron microprobe (EMP) were used in this study to analyze the cathodoluminescence properties of quartz grains in samples of the Upper Freeport coal bed because quartz grains in coal are small (silt sized) and below the resolution capabilities of a standard luminoscope. Quartz grains were identified by the detection of silicon alone with energy dispersive X-ray units attached to both the SEM and the EMP.

Conference Paper↗

Elemental X-ray mapping of agglutinated foraminifer tests: A non- destructive technique for determining compositional characteristics.

The composition of agglutinated foraminiferal tests vary remarkably in response to local substrate characteristics, physiochemical properties of the water column and species- dependant selectivity of test components. We have employed a technique that combines a scanning electron microscope with an energy dispersive X-ray spectrometer system to identify major and minor elemental constituents of agglutinated foraminiferal walls. As a sample is bombarded with a beam of high energy electrons, X-rays are generated that are characteristic of the elements present. As a result, X- ray density maps can be produced for each of several elements present in the tests of agglutinated foraminifers.

Micropaleontology↗

ASPECTS OF ARCTIC SEA ICE OBSERVABLE BY SEQUENTIAL PASSIVE MICROWAVE OBSERVATIONS FROM THE NIMBUS-5 SATELLITE.

Observations made from 1972 to 1976 with the Electrically Scanning Microwave Radiometer on board the Nimbus-5 satellite provide sequential synoptic information of the Arctic sea ice cover. This four-year data set was used to construct a fairly continuous series of three-day average 19-GHz passive microwave images which has become a valuable source of polar information, yielding many anticipated and unanticipated discoveries of the sea ice canopy observed in its entirety through the clouds and during the polar night. Short-term, seasonal, and annual variations of key sea ice parameters, such as ice edge position, ice types, mixtures of ice types, ice concentrations, and snow melt on the ice, are presented for various parts of the Arctic.

Conference Paper↗

Heat capacity and thermodynamic functions for gehlenite and staurolite: with comments on the Schootky anomaly in the heat capacity of staurolite.

The heat capacities of a synthetic gehlenite and a natural staurolite were measured from 12 and 5 K, respectively, to 370 K by adiabatic calorimetry, and the heat capacities of staurolite were measured to 900 K by differential scanning calorimetry. At 298.15 K and 1 bar the entropy of gehlenite is 210.1 + or - 0.6 J/(mol.K) and that of staurolite is 1019.6 + or - 12.0 for H2Al2Fe4Al16Si8O48 and 1101.0 + or - 12.0 for 103(H3Al1.15Fe2+0.60)- 324(Fe2+2.07Fe3+0.54 Ti0.08Mn0.02Al1.19)(Mg0.44Al15.26)Si8O48. -J.A.Z.

American Mineralogist↗

Heat capacities and thermodynamic functions for beryl, Be3Al2Si6O18, phenakite, Be2SiO4, euclase, BeAlSiO4(OH), bertrandite, Be4Si2O7(OH)2, and chrysoberyl, BeAl2O4.

The heat capacities of beryl, phenakite, euclase and bertrandite have been measured between approx 5 and 800 K by combined quasi-adiabatic cryogenic calorimetry and differential scanning calorimetry. The heat capacities of chrysoberyl have been measured from 340 to 800 K. The resulting data have been combined with solution and phase-equilibrium experimental data and simultaneously adjusted using the programme PHAS20 to provide an internally consistent set of thermodynamic properties for several important beryllium phases. The experimental heat capacities and tables of derived thermodynamic properties are presented.-J.A.Z.

American Mineralogist↗

SEAFLOOR EXPLORATION AND CHARACTERIZATION: PREREQUISITE TO OCEAN SPACE UTILIZATION.

A historical survey of US bathymetric mapping is presented up through the major mapping project begun in response to the 1983, establishment of an Exclusive Economic Zone (EEZ), 200 nautical miles seaward. The EEZ extends sovereign rights for the purposes of exploring, exploiting, conserving, and managing natural resources in the coastal ocean. This new area is approximately 3. 4 million square nautical miles or about 1. 3 times the total US land area. To characterize the resources within it, the US National Oceanic and Atmospheric Administration (NOAA) and the US Geological Survey (USGS) are undertaking systematic mapping programs of the EEZ. NOAA's effort includes detailed bathymetric mapping of the seabed. The USGS is using a wide-swath side-scan sonar system to map the EEZ seafloor on a reconaissance scale.

Conference Paper↗

National aerial photography program as a geographic information system resource

The National Aerial Photography Program (NAPP) is jointly funded by Federal agencies and States that choose to participate in a 50-50 cost sharing cooperative arrangement. The NAPP is designed to acquire black-and-white (B&W) or color infrared (CIR) photography at a scale of 1:40,000. The status of NAPP flying, now going into the first year of its second 5-year cycle, is reviewed to inform the user community of NAPP's coverage. The resolution, geometric quality and flight parameters are used to estimate the system's cartographic potential to produce orthophotoquads, digital elevation models, topographic maps and digital information to meet national map accuracy standards at 1:12,000 and 1:24,000-scale and serve as a geographic information system resource. Also, a technique is presented to compute the optimum scanning spot size (15 ??m) and storage required for converting the B&W or CIR photography to digital, machine-readable pixel form. The resulting digital NAPP data are suitable for a wide variety of new applications, including use in geographic information systems.

Conference Paper↗

Spatial resolution requirements for automated cartographic road extraction

Ground resolution requirements for detection and extraction of road locations in a digitized large-scale photographic database were investigated. A color infrared photograph of Sunnyvale, California was scanned, registered to a map grid, and spatially degraded to 1- to 5-metre resolution pixels. Road locations in each data set were extracted using a combination of image processing and CAD programs. These locations were compared to a photointerpretation of road locations to determine a preferred pixel size for the extraction method. Based on road pixel omission error computations, a 3-metre pixel resolution appears to be the best choice for this extraction method. -Authors

Photogrammetric Engineering and Remote Sensing↗

Heat capacities and thermodynamic properties of annite (aluminous iron biotite)

The heat capacities have been measured between 7 and 650 K by quasi-adiabatic calorimetry and differential scanning calorimetry. At 298.15 K and 1 bar, the calorimetric entropy for our sample is 354.9??0.7 J/(mol.K). A minimum configurational entropy of 18.7 J/(mol.K) for full disorder of Al/Si in the tetrahedral sites should be added to the calorimetric entropy for third-law calculations. The heat capacity equation [Cp in units of J/mol.K)] Cp0 = 583.586 + 0.075246T - 3420.60T-0.5 - (4.4551 ?? 106)T-2 fits the experimental and estimated heat capacities for our sample (valid range 250 to 1000 K) with an average deviation of 0.37%. -from Authors

American Mineralogist↗

Hydrothermal and metamorphic berthierine from the Kidd Creek volcanogenic massive sulfide deposit, Timmins, Ontario

Berthierine, a 7 A?? Fe-Al member of the serpentine group, occurs in the footwall stringer zone of the Archean Kidd Creek massive sulfide deposit, associated with quartz, muscovite, chlorite, pyrite, sphalerite, chalcopyrite, and local tourmaline, cassiterite, and halloysite. Petrographic and scanning electron microscopic (SEM) studies reveal different types of berthierine occurrences, including interlayers within the rims on deformed chlorite, intergrowths with muscovite and halloysite, and discrete coarse grains. This is the first reported occurrence of berthierine from volcanogenic massive sulfide deposits. Textural relations suggest that most of the berthierine formed as a primary hydrothermal mineral at relatively high temperatures (~350??C) in the footwall stringer zone, probably by the replacement of a pre-existing aluminous phase such as muscovite or chlorite. However, the intergrowth textures observed by SEM and TEM suggest that some of the berthierine originated by syn- or post-metamorphic replacement of chlorite. -from Authors

Canadian Mineralogist↗

Film cameras or digital sensors? The challenge ahead for aerial imaging

Cartographic aerial cameras continue to play the key role in producing quality products for the aerial photography business, and specifically for the National Aerial Photography Program (NAPP). One NAPP photograph taken with cameras capable of 39 lp/mm system resolution can contain the equivalent of 432 million pixels at 11 ??m spot size, and the cost is less than $75 per photograph to scan and output the pixels on a magnetic storage medium. On the digital side, solid state charge coupled device linear and area arrays can yield quality resolution (7 to 12 ??m detector size) and a broader dynamic range. If linear arrays are to compete with film cameras, they will require precise attitude and positioning of the aircraft so that the lines of pixels can be unscrambled and put into a suitable homogeneous scene that is acceptable to an interpreter. Area arrays need to be much larger than currently available to image scenes competitive in size with film cameras. Analysis of the relative advantages and disadvantages of the two systems show that the analog approach is more economical at present. However, as arrays become larger, attitude sensors become more refined, global positioning system coordinate readouts become commonplace, and storage capacity becomes more affordable, the digital camera may emerge as the imaging system for the future. Several technical challenges must be overcome if digital sensors are to advance to where they can support mapping, charting, and geographic information system applications.

Photogrammetric Engineering and Remote Sensing↗