SEARCH · Geology Reports

Results for “Journal of Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources

USGS2002

Global Omori law decay of triggered earthquakes: Large aftershocks outside the classical aftershock zone

[1] Triggered earthquakes can be large, damaging, and lethal as evidenced by the1999 shocks in Turkey and the 2001 earthquakes in El Salvador. In this study, earthquakes with M s ≥ 7.0 from the Harvard centroid moment tensor (CMT) catalog are modeled as dislocations to calculate shear stress changes on subsequent earthquake rupture planes near enough to be affected. About 61% of earthquakes that occurred near (defined as having shear stress change ∣Δτ∣ ≥ 0.01 MPa) the M s ≥ 7.0 shocks are associated with calculated shear stress increases, while ∼39% are associated with shear stress decreases. If earthquakes associated with calculated shear stress increases are interpreted as triggered, then such events make up at least 8% of the CMT catalog. Globally, these triggered earthquakes obey an Omori law rate decay that lasts between ∼7–11 years after the main shock. Earthquakes associated with calculated shear stress increases occur at higher rates than background up to 240 km away from the main shock centroid. Omori's law is one of the few time‐predictable patterns evident in the global occurrence of earthquakes. If large triggered earthquakes habitually obey Omori's law, then their hazard can be more readily assessed. The characteristic rate change with time and spatial distribution can be used to rapidly assess the likelihood of triggered earthquakes following events of M s ≥ 7.0. I show an example application to the M = 7.7 13 January 2001 El Salvador earthquake where use of global statistics appears to provide a better rapid hazard estimate than Coulomb stress change calculations.

Journal of Geophysical Research B: Solid Earth↗

USGS2022

Ancient winds, waves, and atmosphere in Gale Crater, Mars, inferred from sedimentary structures and wave modeling

Wave modeling and analysis of sedimentary structures were used to evaluate whether four examples of symmetrical, reversing, or straight-crested bedforms in Gale crater sandstones are preserved wave ripples; deposition by waves would demonstrate that the lake was not covered by ice at that time. Wave modeling indicates that regardless of atmospheric density, winds that exceeded the threshold of aeolian sand transport could have generated waves capable of producing nearshore wave ripples in most grain sizes of sand. Reversing 3-m-wavelength bedforms in the Kimberley formation are interpreted not as wave ripples but rather as large aeolian ripples that formed in an atmosphere approximately as thin as at present. These exhumed bedforms define many of the ridges at outcrops that appear striated in satellite images. At Kimberley these bedforms demonstrably underlie and therefore predate subaqueous beds, suggesting that a thin atmosphere existed at least temporarily before subaqueous deposition ceased in the crater. The other three candidate wave ripples (Square Top, Hunda, and Voe) are consistent with modeled waves, but other origins cannot be excluded. The predominance of flat-laminated (non-rippled) beds in the lacustrine Murray formation suggests that some aspect of the lake was not conducive to formation or preservation of recognizable wave ripples. Water depths may generally have been too deep, lakebed sediment may have been too fine-grained, the lake may have been smaller than modeled, or the lake may have been covered by ice. Plain Language Summary Wave modeling and analysis of sedimentary structures were used to evaluate whether ancient lake deposits in Gale crater contain ripples formed by waves on the surface of the lake. Deposition by waves would show that the lake was not covered by ice at that time. Modeling shows that regardless of atmospheric density, winds capable of moving sand on land would generally have been strong enough to form waves that would produce ripples near shore. Large bedforms in the Kimberley formation are interpreted as ripples formed by the wind in an atmosphere similar to that of Mars today. These bedforms underlie and are older than other beds deposited in water, thereby showing that a thin atmosphere existed at least temporarily before deposition in water ceased in the crater. Three other candidate wave ripples are consistent with modeled waves, but other origins are possible. Thick sequences of sedimentary rock in Gale crater are flat-laminated rather than rippled, suggesting that some aspect of the lake was not favorable for their formation or preservation. Much of the lake may have been too deep or ice-covered, or the lake may have been smaller than modeled or had sediment too fine to form easily observed ripples.

Journal of Geophysical Research: Planets↗

USGS2016

Uncertainty in tsunami sediment transport modeling

Erosion and deposition from tsunamis record information about tsunami hydrodynamics and size that can be interpreted to improve tsunami hazard assessment. We explore sources and methods for quantifying uncertainty in tsunami sediment transport modeling. Uncertainty varies with tsunami, study site, available input data, sediment grain size, and model. Although uncertainty has the potential to be large, published case studies indicate that both forward and inverse tsunami sediment transport models perform well enough to be useful for deciphering tsunami characteristics, including size, from deposits. New techniques for quantifying uncertainty, such as Ensemble Kalman Filtering inversion, and more rigorous reporting of uncertainties will advance the science of tsunami sediment transport modeling. Uncertainty may be decreased with additional laboratory studies that increase our understanding of the semi-empirical parameters and physics of tsunami sediment transport, standardized benchmark tests to assess model performance, and development of hybrid modeling approaches to exploit the strengths of forward and inverse models.

Journal of Disaster Research↗

USGS1978

Remote-sensing methods for monitoring surface coal mining in the northern Great Plains

Recent studies at a large surface coal mine in southern Montana confirm that remote sensing is both feasible and effective for gathering land-use and environmental data (spatial, dynamic, and seasonal) for large-scale surface mines in the northern Great Plains. The Western Energy Co.'s Rosebud mine near Colstrip, Mont., was selected as a test site because it typifies surface operations in the Powder River Basin of Montana and Wyoming and elsewhere in the northern Great Plains. Several basic interpretive and analytical remote-sensing techniques were used to identify and delineate various categories of surface-mining operations and concurrent stages of reclamation that characterize most, if not all, such mining operations. Color infrared and black-and-white aerial photographs and a black-and-white band 5 Landsat image were used to identify (1) high wall and bench areas, (2) ungraded spoils, (3) graded and recontoured areas, (4) revegetated recontoured areas, (5) natural and impounded surface water, and (6) miscellaneous areas. Over the lifespan of an extensive surface mine, cultural and natural processes and cumulative environmental effects can be monitored by capitalizing on the close correlation between enhanced satellite imagery, infrared and (or) black-and-white aerial photography, standard large-scale topographic maps (such as U.S. Geological Survey 7½-minute quadrangle maps), and results of onsite inspection of mining and reclamation by Federal or State agencies.

Montana↗

USGS2006

Geologic, hydrologic, and geochemical interpretations of mineral deposits as analogs for understanding transport of environmental contaminants

Base- and precious-metal mineral deposits comprise anomalous concentrations of metals and associated elements, which may be useful subjects for study as analogs for migration of environmental contaminants. In the geologic past, hydrothermal mineral deposits formed at the intersection of favorable geologic, hydrologic and geochemical gradients. In the present, weathering of these sulfide-rich deposits occurs as a result of the interplay between rates of oxygen supply versus rates of ground or surface-water flow. Transport and spatial dispersion of elements from a mineral deposit occurs as a function of competing rates of water flow versus rates of attenuation mechanisms such as adsorption, dilution, or (co)precipitation. In this paper we present several case studies from mineralized and altered sedimentary and crystalline aquifers in the western United States to illustrate the geologic control of ground-water flow and solute transport, and to demonstrate how this combined approach leads to a more complete understanding of the systems under study as well as facilitating some capability to predict major flow directions in aquifers.

Journal of Geochemical Exploration↗

USGS2023

Methane pore accessibility, densification, and accommodation by organic matter in the Niobrara Formation at wet-gas thermal maturity conditions

Petroleum within unconventional source-rock reservoirs is hosted in organic matter and mineral pore space as well as in voids and microfractures. Recent work has shown that for source-rock reservoirs in the dry gas window, significant portions of methane (CH 4 ), the main component of petroleum at elevated maturities, can be stored within fine (<5 nm) organic matter porosity. However, within reservoirs at lower thermal maturities (e.g., peak oil or wet-gas conditions), the distribution and behavior of CH 4 and the higher alkanes that comprise gas condensates across pore sizes is unclear, especially for pores with diameters <50 nm. Understanding CH 4 distribution within these settings provides insight for petroleum generation, movement, and recoverability, ultimately enabling increased accuracy of estimated ultimate recovery. Here wide Q-range total neutron scattering was used to evaluate perdeuterated methane (CD 4 ) behavior at reservoir pressures (200–750 bar) and temperature (60 °C) in a sample at the late oil/wet gas thermal maturity stage from the Late Cretaceous Niobrara Formation, an active petroleum producing formation within the Denver-Julesburg Basin, U.S. Neutron scattering data show that mesopores within the Niobrara Formation sample exhibit mass fractal scattering, similar to previously measured U.S. marine shale samples. In the presence of CD 4 , scattering intensities between Q = 0.02–0.1 Å −1 (corresponding to nominal pore diameters from 25 to 5 nm, respectively) decrease with increased pressure up to 750 bar where at least 80% of all pores with ~25 nm diameters are CD 4 accessible. In contrast, between Q = 0.1–1 Å −1 (corresponding to nominal pore diameters from 5 to 0.5 nm, respectively), scattering intensity initially increased at the lowest CD 4 pressure tested (200 bar) before decreasing with increasing pressure. These signal fluctuations with CD 4 pressure are interpreted to arise from the creation of pores with diameters <5 nm, likely through deformation of solid bitumen by supercritical CD 4 , and/or the incorporation of CD 4 within sample organic matter. This new porosity represents an increase of at least ~8% in available pore volume within the sample, although the majority of these pores do not persist following removal of CD 4 . Additionally, there is strong evidence for densification of CD 4 within the sample indicated by a shift in the CD 4 intermolecular scattering peak to higher Q-values compared to bulk CD 4 . These results provide insight into fluid properties within source-rock reservoirs at late oil/wet gas thermal maturities, especially as they relate to organic porosity interconnectivity, and are discussed with perspective toward pressure management of gas condensate wells.

Colorado, Kansas, Nebraska, Wyoming↗

USGS2010

Mineralogy and stratigraphy of phyllosilicate-bearing and dark mantling units in the greater Mawrth Vallis/west Arabia Terra area: Constraints on geological origin

Analyses of MRO/CRISM images of the greater Mawrth Vallis region of Mars affirm the presence of two primary phyllosilicate assemblages throughout a region ∼1000 × 1000 km. These two units consist of an Fe/Mg-phyllosilicate assemblage overlain by an Al-phyllosilicate and hydrated silica assemblage. The lower unit contains Fe/Mg-smectites, sometimes combined with one or more of these other Fe/Mg-phyllosilicates: serpentine, chlorite, biotite, and/or vermiculite. It is more than 100 m thick and finely layered at meter scales. The upper unit includes Al-smectite, kaolin group minerals, and hydrated silica. It is tens of meters thick and finely layered as well. A common phyllosilicate stratigraphy and morphology is observed throughout the greater region wherever erosional windows are present. This suggests that the geologic processes forming these units must have occurred on at least a regional scale. Sinuous ridges (interpreted to be inverted channels) and narrow channels cut into the upper clay-bearing unit suggesting that aqueous processes were prevalent after, and possibly during, the deposition of the layered units. We propose that layered units may have been deposited at Mawrth Vallis and then subsequently altered to form the hydrated units. The Fe/Mg-phyllosilicate assemblage is consistent with hydrothermal alteration or pedogenesis of mafic to ultramafic rocks. The Al-phyllosilicate/hydrated silica unit may have formed through alteration of felsic material or via leaching of basaltic material through pedogenic alteration or a mildly acidic environment. These phyllosilicate-bearing units are overlain by a darker, relatively unaltered, and indurated material that has probably experienced a complex geological history.

Journal of Geophysical Research↗

USGS2007

Fluid chemistry and evolution of hydrothermal fluids in an Archaean transcrustal fault zone network: The case of the Cadillac Tectonic Zone, Abitibi greenstone belt, Canada

Detailed fluid geochemistry studies on hydrothermal quartz veins from the Rouyn-Noranda and Val-d'Or areas along the transcrustal Cadillac Tectonic Zone (CTZ) indicate that unmineralized (with respect to gold) sections of the CTZ contained a distinct CO2-dominated, H2S-poor hydrothermal fluid. In contrast, both gold mineralized sections of the CTZ (e.g., at Orenada #2) and associated higher order shear zones have a H2O-CO2 ?? CH4-NaCl hydrothermal fluid. Their CO2/H2S ratios indicate H2S-rich compositions. The Br/Cl compositions in fluid inclusions trapped in these veins indicate that hydrothermal fluids have been equilibrated with the crust. Oxygen isotope ratios from hydrothermal quartz veins in the CTZ are consistently 2??? more enriched than those of associated higher order shear zones, which are interpreted to be a function of greater fluid/rock ratios in the CTZ and lower fluid/rock ratios, and more efficient equilibration of the hydrothermal fluid with the wall rock, in higher order shear zones. An implication from this study is that the lower metal endowment of the transcrustal CTZ, when compared with the higher metal endowment in higher order shear zones (ratio of about 1 : 1000), may be the result of the lack of significant amounts of H2O-H2S rich fluids in most of the CTZ. In contrast, gold mineralization in the higher order shear zones appear to be controlled by the high H2S activity of the aqueous fluids, because gold was likely transported in a bisulfide complex and was deposited during sulfidation reactions in the wall rock and phase separation in the quartz veins. ?? 2007 NRC Canada.

Canadian Journal of Earth Sciences↗

USGS2005

Mudstone sedimentation at high latitudes: Ice as a transport medium for mud and supplier of nutrients

Controls on mudstone deposition at high latitudes are poorly known relative to low latitudes. In recent sediments deposited in these environments, ice significantly influences sediment transport and primary productivity. The products of ice transport are relatively well known in glacimarine settings, but are less well known from below melting sea ice. This latter setting is significant as today it is associated with high primary organic productivity. The aim of this study is to assess how sea ice might have controlled lithofacies variability and organic-matter distribution and preservation in an ancient marine, siliciclastic mudstone-dominated succession deposited at high latitudes. Combined sedimentary logging, optical and electron optical (back-scatte red electron imagery), geochemical, and isotopic methods were used to determine sample variability in forty-five samples collected from the Lower Cretaceous succession in the Mikkelsen Bay State #1 borehole (North Slope, Alaska). The succession overall fines upward and contains muddy sandstones and sand- and silt-bearing, clay-rich mudstones towards its base in contrast to clay-rich and clay-dominated mudstones towards its top. Some of the mudstone units exhibit thin (< 5 mm), relic-beds that fine upward weakly. In some units small (0.5 mm), bed-parallel silt-filled microburrows disrupt depositional laminae whereas in others pervasive burrowing completely obliterates original depositional textures. Many of the units are pelleted. These mudstones are unusual in that they contain minor but very striking outsize grains, composed of subrounded to rounded sand and granule-size material. In addition, they are good petroleum source rocks, with between 2.8 and 5.9 wt % total organic carbon, of predominantly Type II kerogen. The organic matter has an isotopic signature ranging from -25.4??? ??13C to -28.1??? ??13C. Thin tuffs (< 20 mm) and carbonate-cemented units are also present. Given the absence of significant polar ice in the Early Cretaceous the outsized grains are interpreted to have been deposited from a combination of melting, dirty anchor, and fast ice. The mud fraction, which forms the bulk of the sediment, is interpreted to have been deposited from melting, sediment-laden frazil ice, and fast ice. After deposition sediments were partially reworked by bottom currents generated by brine rejection during sea ice formation. Sympagic organisms, grazing on algae and bacteria both within and below the ice, pelleted the sediment. Bioturbation, which varies through the succession, indicates that sedimentation probably occurred beneath a predominantly oxic or dysoxic water column. In this setting productivity was fueled by nutrients released from melting sea ice in the marginal ice zone. The good petroleum source potential of these mudstones is attributed to high organic productivity coupled to episodic and rapid sedimentation rather than existence of bottom-water anoxia linked to upwelling. Because sea-ice rafting was probably the dominant sediment transport mechanism it is not appropriate to use sequence stratigraphic methodology to predict lithofacies variability in this environment. Copyright ?? 2005, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗

USGS2011

The Forecast Interpretation Tool—a Monte Carlo technique for blending climatic distributions with probabilistic forecasts

Probabilistic forecasts are produced from a variety of outlets to help predict rainfall, and other meteorological events, for periods of 1 month or more. Such forecasts are expressed as probabilities of a rainfall event, e.g. being in the upper, middle, or lower third of the relevant distribution of rainfall in the region. The impact of these forecasts on the expectation for the event is not always clear or easily conveyed. This article proposes a technique based on Monte Carlo simulation for adjusting existing climatologic statistical parameters to match forecast information, resulting in new parameters defining the probability of events for the forecast interval. The resulting parameters are shown to approximate the forecasts with reasonable accuracy. To show the value of the technique as an application for seasonal rainfall, it is used with consensus forecast developed for the Greater Horn of Africa for the 2009 March-April-May season. An alternative, analytical approach is also proposed, and discussed in comparison to the first simulation-based technique.

International Journal of Climatology↗

USGS2013

Comparison of age distributions estimated from environmental tracers by using binary-dilution and numerical models of fractured and folded karst: Shenandoah Valley of Virginia and West Virginia, USA

Measured concentrations of environmental tracers in spring discharge from a karst aquifer in the Shenandoah Valley, USA, were used to refine a numerical groundwater flow model. The karst aquifer is folded and faulted carbonate bedrock dominated by diffuse flow along fractures. The numerical model represented bedrock structure and discrete features (fault zones and springs). Concentrations of 3 H, 3 He, 4 He, and CFC-113 in spring discharge were interpreted as binary dilutions of young (0–8 years) water and old (tracer-free) water. Simulated mixtures of groundwater are derived from young water flowing along shallow paths, with the addition of old water flowing along deeper paths through the model domain that discharge to springs along fault zones. The simulated median age of young water discharged from springs (5.7 years) is slightly older than the median age estimated from 3 H/ 3 He data (4.4 years). The numerical model predicted a fraction of old water in spring discharge (0.07) that was half that determined by the binary-dilution model using the 3 H/ 3 He apparent age and 3 H and CFC-113 data (0.14). This difference suggests that faults and lineaments are more numerous or extensive than those mapped and included in the numerical model.

Virginia;West Virginia↗

USGS2000

Period doubling and other nonlinear phenomena in volcanic earthquakes and tremor

Evidence of subharmonic period-doubling cascades has recently been recognized in seismograms of volcanic tremor from several volcanoes. This phenomenon occurs only in nonlinear systems, and is the commonest route by which such systems change from periodic to chaotic behavior. It is predicted to occur in a model of volcanic tremor excitation by flow-induced vibration, and it might well also occur in other volcano-seismic source process. If the possibility of period doubling is not taken into account in interpreting spectra of tremor and long-period earthquakes, then low-frequency "sub-harmonic" oscillations may be mis-identified as normal modes of a linear acoustic resonator, leading to errors of an order of magnitude or more in inferred magma-body dimensions. This example illustrates the importance of nonlinear phenomena in attempts to understand volcano-seismic phenomena physically. Linear systems are fundamentally incapable of causing earthquakes or exciting tremor, so nonlinearity is essential to any theory of volcano-seismic phenomena. Nonlinear processes are in many respects qualitatively different from linear ones. A few of their characteristics that might be relevant in volcanoes include the possibility: (1) that damping might increase, rather than decrease, oscillation frequencies; and (2) that these frequencies might be functions of the amplitude of oscillation, so that temporal variations in spectral peak frequencies might not be manifestations of changes of conditions within the magmatic system.

Journal of Volcanology and Geothermal Research↗

USGS1998

Rupture characteristics of the three M ∼ 4.7 (1992-1994) Parkfield earthquakes

Slip on the San Andreas fault was determined for three M &sim; 4.7 earthquakes using a tomographic inverse system [ Beroza and Spudich , 1988] to invert seismic source time functions (STFs) from S waves. STFs were obtained by deconvolving mainshock accelerograms by those from collocated smaller earthquakes. Accelerograms were from the U.S. Geological Survey Parkfield Small Aperture Array (UPSAR) and from a distributed array of digital accelerometer stations at Parkfield. Eight or nine STFs are used in each of the three inversions. STFs are typically symmetrical pulses with a duration of about 0.3–0.5 s. In the inversion, mainshock rise time was set to 0.05 s, and we allowed the rupture time to vary slightly from a constant rupture velocity of approximately 0.85β. Rupture for all three events, which are located in or close to the Middle Mountain preparation zone or box (MMB), quickly reaches a local maximum in slip and then propagates outward to peaks, ridges, or plateaus in the slip distribution. Slip for the October 20, 1992, event (located just inside the southern edge of the MMB) propagates from an initial spike north and updip along a curving ridge for about 2 km. The initial spike continued to grow in the November 14, 1993, event (located north of the October 20, 1992, event just beneath the hypocenter of the 1966 Parkfield earthquake), which shows little directivity, although there is a smaller patch of slip updip and to the south. In contrast, rupture for the December 20, 1994, event (located just south of the October 20, 1992, event) propagated north and slightly updip, creating a rough plateau in slip a few kilometers wide on a side. Directivity for this event also is to the north. Directivity for all three events points in the approximate direction of the 1966 hypocenter. Small pulses, which comprise a coda, are found on the STFs for several seconds after the initial impulsive event. Several tests based on the assumption that the average of all STFs from UPSAR for each event is an estimate of the true slip at the source suggest that the codas in the STFs are S waves from a long-duration source rather than uncorrected site response. An initiation phase is found on the array average for the November 14, 1993, and December 20, 1994, events. These precursory phases are the result of a spike in slip at the hypocenter. A value of 2.4–4 mm is obtained for D c , the slip-weakening distance, by interpreting the initial spike as a critical patch. The few aftershocks for the October 20, 1992, event are distributed to the north and updip of the mainshock, but the November 14, 1993, event had a strong burst of aftershock activity that propagated to the north of its hypocenter at roughly the same depth. Aftershocks of the December 20, 1994, event are mostly updip. The November 14, 1993, event had the simplest slip distribution, appeared to be the most impulsive, and had the most active aftershock sequence and the greatest depth. If the eventual Parkfield earthquake initiates near the 1966 hypocenter, then the directivity of the three events studied here will have pointed to it. However, it is certainly possible that both the initiation of characteristic Parkfield shocks and the directivity of smaller events are controlled by fault properties on a larger scale such as by fault bends or jogs.

Journal of Geophysical Research B: Solid Earth↗

USGS2000

The Midway sequence: A Timiskaming-type, pull-apart basin deposit in the western Wawa subprovince, Minnesota

The Midway sequence is an assemblage of subaerially deposited clastic and volcanic rocks that forms a narrow wedge within Neoarchean greenstone of the western Wawa subprovince of the Superior Province. Volcanic conglomerate in the Midway sequence contains clasts of stratigraphically older greenstone, together with clasts of a distinctive hornblende-phyric trachyandesite that is not represented among the older greenstone flows. The trachyandesite forms flows and pyroclastic units that are interbedded with lenticular deposits of volcanic conglomerate in a manner interpreted to indicate approximately coeval volcanism and alluvial fan - fluvial sedimentation within a linear, restricted, and tectonically active depocentre. The Midway sequence unconformably overlies greenstone on one side and is bounded by a regional-scale, strike-slip fault on the other. Structural analyses show that the Midway sequence was deposited after an early, precleavage folding event (D 1 ) in greenstone, but before the regional metamorphic cleavage-forming D 2 deformation. Lithologic and structural attributes are consistent with deposition in a strike-slip "pull-apart" basin. The stratigraphic and structural characteristics of the Midway sequence are generally similar to those of the Timiskaming Group and Timiskaming-type rocks in Canada, and more specifically to those of the Shebandowan Group in the Thunder Bay district. This similarity implies that the latest Archean tectonic and magmatic history of the western Wawa subprovince may have been nearly synchronous over great distances.

Minnesota↗

USGS1987

A comparison of the largest rainfall-runoff floods in the United States with those of the People's Republic of China and the world

The maximum historic rainfall-runoff floods measured in the United States, the People's Republic of China and the world all plot close to a smooth curve of drainage area versus discharge. In the United States, the possibility that flood peaks were overestimated and the closeness of these peaks to the probable maximum floods suggest that this limiting curve of maximum floods will not significantly change position with more data. Data for future floods that plot above this curve need to be examined carefully. The most likely interpretations for new data points above the curve would be the confusion of a mud or debris flow with a water-dominated flood, or the damming of channels by debris or a landslide and subsequent bursting. In the United States, excluding Hawaii, the largest measured historic floods in basins less than about 1000 km 2 , all occurred in arid and semi-arid areas. In China, the majority of the largest measured historic floods occurred in the east and southeast in basins on the windward side of mountainous areas, and in locations affected by typhoons. One extraordinary flood that exceeds any other recorded flood in the world for the size of the drainage basin in which it occurred is the New Caledonia flood of December 24, 1981 on the Ouaieme River. Worldwide, the largest measured historic floods occurred primarily between 40°N and 40°S latitude on streams and rivers near coastal areas.

Journal of Hydrology↗

USGS2014

Mummy Lake: An unroofed ceremonial structure within a large-scale ritual landscape

The structure at Mesa Verde National Park known historically as Mummy Lake and more recently as Far View Reservoir is not part of a water collection, impoundment, or redistribution system. We offer an alternative explanation for the function of Mummy Lake. We suggest that it is an unroofed ceremonial structure, and that it serves as an essential component of a Chacoan ritual landscape. A wide constructed avenue articulates Mummy Lake with Far View House and Pipe Shrine House. The avenue continues southward for approximately 6 km where it apparently divides connecting with Spruce Tree House and Sun Temple/Cliff Palace. The avenue has previously been interpreted as an irrigation ditch fed by water impounded at Mummy Lake; however, it conforms in every respect to alignments described as Chacoan roads. Tree-ring dates indicate that the construction of Spruce Tree House and Cliff Palace began about A.D. 1225, roughly coincident with the abandonment of the Far View community. This pattern of periodically relocating the focus of an Anasazi community by retiring existing ritual structures and linking them to newly constructed facilities by means of broad avenues was first documented by Fowler and Stein (1992) in Manuelito Canyon, New Mexico. Periods of intense drought appear to have contributed to the relocation of prehistoric Native Americans from the Far View group to Cliff Palace/Spruce Tree House in the mid-13th century and eventually to the abandonment of all Anasazi communities in southwestern Colorado in the late-13th century.

Journal of Archaeological Science↗

USGS1996

Quantitative investigations of the Missouri gravity low: A possible expression of a large, Late Precambrian batholith intersecting the New Madrid seismic zone

Analysis of gravity and magnetic anomaly data helps characterize the geometry and physical properties of the source of the Missouri gravity low, an important cratonic feature of substantial width (about 125 km) and length (> 600 km). Filtered anomaly maps show that this prominent feature extends NW from the Reelfoot rift to the Midcontinent Rift System. Geologic reasoning and the simultaneous inversion of the gravity and magnetic data lead to an interpretation that the gravity anomaly reflects an upper crustal, 11-km-thick batholith with either near vertical or outward dipping boundaries. Considering the modeled characteristics of the batholith, structural fabric of Missouri, and relations of the batholith with plutons and regions of alteration, a tectonic model for the formation of the batholith is proposed. The model includes a mantle plume that heated the crust during Late Precambrian and melted portions of lower and middle crust, from which the low-density granitic rocks forming the batholith were partly derived. The batholith, called the Missouri batholith, may be currently related to the release of seismic energy in the New Madrid seismic zone (earthquake concentrations occur at the intersection of the Missouri batholith and the New Madrid seismic zone). Three qualitative mechanical models are suggested to explain this relationship with seismicity. Copyright 1996 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

Lithology and evolution of the crust-mantle boundary region in the southwestern Basin and Range Province

Mantle and crustal xenoliths from volcanic rocks in the southwestern Basin and Range province and Colorado Plateau Transition Zone reveal histories of episodic magmatism and deformation that have profoundly influenced the crustal structure of this region. Seismic transects in this area show a strongly reflective Moho of generally low relief, which, in the area of modern transects, consists of a thin zone (<2 km thick) of short reflectors. The upper mantle is transparent and has a P n of 7.8–8.0 km/s similar to much of the western United States. A lower crustal zone, 2–13 km thick, has variable internal reflectivity and a relatively low velocity of 6.6–6.8 km/s. Upper mantle peridotite xenoliths show both ductile and brittle deformational features and have structures and compositions affected by magmatic intrusion; intrusions form complex dike systems and extensive zones of grain boundary infiltration in peridotite xenoliths. Whereas melt infiltration preceded and followed ductile deformation, brittle deformation, represented by closely spaced joint systems and faults, followed ductile deformation and is related to the youngest magmatic episodes. These structural characteristics and high uppermost mantle temperature (∼1000°C) may combine to explain the relatively low P n . Alternating layers of ductily deformed and undeformed peridotites, with or without igneous intrusions, may contribute to the reflectivity of the Moho. Lower crustal xenoliths are dominantly igneous-textured pyroxenites and mafic to intermediate gabbros identical to the dikes in peridotite xenoliths. The crustal xenoliths also commonly are jointed, and in addition many show partial melting and have abundant cavities that probably were filled with CO 2 -rich fluids. These rocks are interpreted as products of underplated magmas that were fed through the mantle dike systems and may represent the lowest crustal unit identified in the seismic records. The mafic compositions and high densities of the crustal xenoliths indicate that the low velocity of the lower crust may be caused in part by fracture systems, partial melts, and high temperatures. Garnet granulite xenoliths from a locality with no mantle peridotite xenoliths probably represent crust of the region before late Miocene extension. Felsic granulite xenoliths from two localities have velocities like those of the two lower crustal units identified seismically and could be present in the modern crust as unequilibrated remnants of old crust. The preferred model for the evolution of the lower lithosphere is one in which extension affects the upper mantle as well as the crust and is overlapped in time by multiple magmatic episodes. The earliest magmatic events preceded extension, and later events accompanied and followed extension.

Arizona, California, Nevada↗