Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Earth System Science Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,193 records · Page 49Linked to original sources
USGS2025

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho↗
USGS2026

Groundwater budget for the Mountain Home area, southern Idaho, 2022–23

The U.S. Geological Survey, with funding from the Idaho Department of Water Resources, developed a groundwater budget for the Mountain Home area in southern Idaho for irrigation year 2023 (November 1, 2022–October 31, 2023). This study focused on the water balance across the Cinder Cone Butte Critical Groundwater Area (CGWA), Mountain Home Groundwater Management Area (GWMA), and the rest of the study area (RoSA), compiling data from various sources, including precipitation records, groundwater level measurements, metered groundwater pumpage data, surface water diversions and evapotranspiration (ET) estimates derived from remote sensing satellite imagery, and ground-based reference data. Key inflow components included recharge from applied surface water irrigation (which incorporates incidental recharge from irrigation practices and conveyance losses), estimated tributary streamflow, and estimated mountain block recharge. The key outflow components were groundwater pumpage for irrigation, municipal, industrial, and domestic uses, and ET. Recharge from applied irrigation and mountain block recharge were the largest inflows, and groundwater pumpage for irrigation was the largest outflow. The CGWA had a positive groundwater budget residual of 2,170 acre-feet (acre-ft), which contrasts with observed long-term groundwater level declines and historical trends of storage depletion. This positive residual is likely associated with unquantified outflows, including lateral groundwater flow out of the subregion, or other complexities, such as overestimated tributary contributions relative to the actual recharge for the 2023 water budget. The GWMA exhibited a positive residual of 56,563 acre-ft, primarily owing to recharge from applied surface water irrigation and areal recharge during a wetter-than-average year, which allowed irrigation entities to deliver more water from in-basin and out-of-basin reservoirs. The RoSA showed a large positive residual of 124,933 acre-ft. The interpretation of these positive residuals must account for significant uncertainties, including estimations of areal recharge, tributary streamflow (particularly losses and diversions), ET, the volume of surface water loss to the Snake River, lateral groundwater flows between subregions and across study area boundaries, and the unquantified groundwater discharge to the Snake River. These uncertainties, in combination with the complex hydrogeologic controls on water movement and limitations of remotely sensed data, directly affect the accuracy of water availability assessments. Future data collection efforts would help reduce these uncertainties and support water resource management decisions in the Mountain Home area. Key efforts could include installing additional streamflow gaging stations (particularly to quantify tributary losses and gains and surface water losses to the Snake River), improving groundwater pumpage metering, and validating remotely sensed ET data with ground-based measurements. Furthermore, to better quantify unrepresented or highly uncertain fluxes, focused investigations on groundwater discharge to the Snake River, lateral groundwater flows between subregions and across study area boundaries, and a more robust determination of the actual influence and volume of mountain block recharge would help refine future water availability assessments for the Mountain Home area.

Idaho↗
USGS2023

Evaluation of models for estimating hydraulic conductivity in glacial aquifers from NMR logging

Nuclear magnetic resonance (NMR) logging is a promising method for estimating hydraulic conductivity ( K ). During the past ∼60 years, NMR logging has been used for petroleum applications, and different models have been developed for deriving estimates of permeability. These models involve calibration parameters whose values were determined through decades of research on sandstones and carbonates. We assessed the use of five models to derive estimates of K in glacial aquifers from NMR logging data acquired in two wells at each of two field sites in central Wisconsin, USA. Measurements of K , obtained with a direct push permeameter (DPP), K DPP , were used to obtain the calibration parameters in the Schlumberger-Doll Research, Seevers, Timur-Coates, Kozeny-Godefroy, and sum-of-echoes (SOE) models so as to predict K from the NMR data; and were also used to assess the ability of the models to predict K DPP . We obtained four well-scale calibration parameter values for each model using the NMR and DPP measurements in each well; and one study-scale parameter value for each model by using all data. The SOE model achieved an agreement with K DPP that matched or exceeded that of the other models. The Timur-Coates estimates of K were found to be substantially different from K DPP . Although the well-scale parameter values for the Schlumberger-Doll, Seevers, and SOE models were found to vary by less than a factor of 2, more research is needed to confirm their general applicability so that site-specific calibration is not required to obtain accurate estimates of K from NMR logging data.

Wisconsin↗
USGS2025

An inset groundwater-flow model to evaluate the effects of layering configuration on model calibration and assess managed aquifer recharge near Shellmound, Mississippi

The U.S. Geological Survey has developed a high-resolution inset groundwater-flow model in the Mississippi Delta as part of an interdisciplinary collaboration coordinated by the Mississippi Alluvial Plain project to provide a tool that stakeholders can use to support water-resource management decisions. Groundwater withdrawals from the Mississippi River Valley alluvial (MRVA) aquifer have been vital to support agricultural production in the region, but substantial groundwater-level declines near Shellmound, Mississippi, have caused concerns for long-term sustainability of the aquifer. To better understand the subsurface and try to mitigate the long-term groundwater-level declines, stakeholders have undertaken actions including a Groundwater Transfer and Injection Pilot (GTIP) project using a riverbank filtration-based managed aquifer recharge approach. The pilot project consisted of extracting groundwater near the Tallahatchie River and reinjecting it into the aquifer 3 kilometers west where water levels have substantially declined. A high-resolution airborne electromagnetic (AEM) survey was also completed to collect electrical resistivity data to support the GTIP project and the development of the groundwater model. The inset groundwater-flow model was developed to (1) integrate the AEM data into the optimal layering configuration of the MRVA aquifer that the available observation data can support through calibration, and (2) assess the potential effect of the GTIP project on the groundwater levels. The AEM data were processed into three different layering configurations leading to the development of model A (18 layers), model B (16 layers), and model C (8 layers), all at a 100- x 100-meter cell spatial resolution using the U.S. Geological Survey modular finite-difference flow model 6 code with Newton-Raphson formulation. The model development process integrated recent advances in modeling, such as the incorporation of AEM data, the use of outputs from the soil-water-balance (SWB) model, and the Aquaculture and Irrigation Water-Use Model, and was facilitated by robust automation using the open-source python packages Modflow-setup and SFRmaker. Using Parameter Estimation ++ Iterative Ensemble Smoother, the three numerical groundwater-flow models (models A, B, and C) were calibrated against a set of observations, which included aquifer groundwater levels, streamflows, stream stage, and aquifer transmissivity. Results indicate that the detailed representation of MRVA aquifer layers in model A produced the best calibrated model by history matching, and the integration of data representing surficial connectivity played a key role in improving groundwater recharge and enhancing the ability of the model to match groundwater levels in the cone of depression. A forecast model simulated the managed aquifer recharge approach, and the results indicated that, given average irrigation and recharge conditions (2010–15), the GTIP project has the potential to induce groundwater-level increases of as much as 3 meters around the injection site, but a sustained increase would require repetition in subsequent years of water transfer at 2022 rates or above.

Mississippi↗
USGS2024

Twentieth century extreme precipitation detected in a high-resolution, coastal lake-sediment record from California

California faces increasing economic and societal risks from extreme precipitation and flooding associated with atmospheric rivers (ARs) under projected twenty-first century climate warming. Lake sediments can retain signals of past extreme precipitation events, allowing reconstructions beyond the period of instrumental records. Here, we calibrate AR-related extreme precipitation from the last century to proxy data from lake sediments collected in the latitudinal zone of the highest frequency landfall for modern ARs in California. Excursions in erosional proxy data (Ti/Al) are positively and significantly correlated (r median = 0.45, p median = 0.04) with modern records of integrated vapor transport (IVT, kg m −1 s −1 ), a key metric of AR intensity, using correlations that incorporate age-model uncertainty. Despite the land-use change near the study site, the data suggest intense and long-lasting AR storms are identifiable in this sedimentary record. These results allow conservative inferences concerning past extreme hydrology at this site.

California↗
USGS2025

U.S. Geological Survey Groundwater Climate Response Network, 2024

As of October 2024, the U.S. Geological Survey (USGS) operated 588 sites across the United States and its territories as part of the Groundwater Climate Response Network (CRN). The CRN is comprised of wells selected to monitor the effects of climate variability, such as droughts, on groundwater levels nationwide. The CRN includes nearly 500 locations with real-time data and more than 100 sites with non-real-time data available to the public on the CRN web mapper and the USGS National Water Dashboard.

General Information Product↗
USGS2024

A journey to the center of the USGS National Strong-motion Project processing and beyond

The United States Geological Survey (USGS) National Strong Motion Project (NSMP) has the primary U.S. government responsibility to acquire, process, and disseminate significant strong-motion earthquake ground motion records measured at surficial free-field stations, structures (buildings, dams, and bridges, and geotechnical arrays to the earthquake engineering community. As a result of the deployment of modern seismic instrumentation and growth of tools such as web-services, earthquake data from U.S. and international seismic networks are more accessible than ever. Our mission is to provide raw and processed strong-motion waveforms with PGA values greater than 0.1%g for M3.0 earthquakes and larger in California and M4.0 and larger within the conterminous US, Hawaii, Puerto Rico, and Alaska. Datasets of interest to the engineering and geophysics communities, such as event sequences in areas of induced seismicity and significant global events, are also processed and posted at the Center for Engineering Strong Motion Data (CESMD) at strongmotioncenter.org when available through collaboration with the international strong-motion data community. Here we outline (1) the NSMP’s current workflow to acquire, process, and distribute data at CESMD; (2) our new endeavours and collaborations focusing on comparison and integration of waveform processing software, development of techniques for metadata quality checks before and after earthquakes, and construction of a dynamic site characterization repository; and (3) our topics for possible collaboration topics across the global strong-motion community.

Conference Paper↗
USGS2024

U.S. Geological Survey Groundwater Climate Response Network—2023

As of October 2023, the U.S. Geological Survey (USGS) operated more than 660 sites across the United States and its territories as part of the Groundwater Climate Response Network (CRN). The CRN is comprised of wells and springs selected to monitor the effects of climate variability, such as droughts, on groundwater levels and spring discharge nationwide. The CRN includes more than 550 locations with realtime data and more than 100 sites with non-real-time data available to the public on the CRN web mapper and the USGS National Water Dashboard.

General Information Product↗
USGS2025

Critical Minerals in Ores (CMiO) database

Critical minerals are commodities essential to modern industrial and strategic technologies and are highly vulnerable to supply chain disruption. The Critical Minerals Mapping Initiative (CMMI) is a collaboration among the U.S. Geological Survey (USGS), the Geological Survey of Canada, and Geoscience Australia that aims to deepen global understanding of where critical minerals are located. A key output of this initiative is the Critical Minerals in Ores (CMiO) database that is advancing our collective understanding of critical minerals distributions. For instance, publicly available data on the concentrations of many critical minerals are sparse because these commodities can only be produced in small, yet essential, quantities compared to the primary commodities like copper and zinc. The CMiO database helps bridge this gap by offering high-quality, multielement geochemical data from a wide variety of critical mineral-bearing deposits around the world. Importantly, it uses a novel consensus deposit environment, group, and type classification scheme developed by the agencies that allows comparisons among ore deposits from different regions. The CMiO database contains geochemical data for more than 20,000 samples from more than 100 deposit types comprising 10 deposit environments.

Fact Sheet↗
USGS2025

Groundwater response to managed aquifer recharge at the Southeast Houghton Artificial Recharge Project in Tucson, Arizona

Managed aquifer recharge is a widespread practice for storing water in the subsurface as groundwater. At a managed aquifer recharge facility in southern Arizona, groundwater-level and repeat microgravity data were collected to monitor aquifer response. These data were used to inform parameter identification for an unsaturated-zone flow model used to simulate the recharge process. The facility, the Southeast Houghton Artificial Recharge Project (SHARP), consists of 3 surface basins (about 27,600 square meters [6.8 acres] total surface area) where recycled water is distributed in recharge cycles lasting several months, with dry periods in between. During the study period, December 2020–December 2022, Tucson Water (the City of Tucson’s water utility) reported 6.56×10 6 cubic meters of water (5,320 acre-feet) recharged. Monitoring included groundwater-level observations at 3 monitoring wells and repeat microgravity measurements at as many as 22 locations (some stations were destroyed between surveys). Six gravity surveys were carried out using absolute- and relative-gravity meters. Large gravity increases, more than 250 microgals, were observed during the first repeat survey, 3.5 months after the start of recharge, but only in the immediate vicinity of the recharge basins. Data show that water moved downward to the water table, and storage changes in the unsaturated zone away from the facility were likely minimal. Gravity decreased at stations more than 1 kilometer from the facility, consistent with regional groundwater-level changes. Groundwater-level increases in wells adjacent to the recharge basins began 2 months after the second repeat gravity survey, and 5.5 months after recharge began. Unsaturated-zone flow modeling was carried out using software that simulates water movement and parameter estimation. Model calibration was carried out by minimizing an objective function calculated from the differences between simulated and observed groundwater levels, and between simulated and observed repeat microgravity data. Including repeat microgravity data in the objective function reduced the uncertainty in estimated parameter values for saturated hydraulic conductivity and saturated water content. Modeling indicated that the unsaturated zone between the recharge basins and the water table does not become saturated even after 685 days of simulated infiltration. This gradual wetting may account for increasing infiltration rates over time, as hydraulic conductivity increases with increasing water content. Unsaturated-zone water content decreased rapidly between recharge cycles. Model-simulated groundwater mounding extended about 1 kilometer from the center of SHARP after the 685-day period following the onset of recharge.

Arizona↗
USGS2024

A partially nonergodic ground-motion model for Fourier amplitude spectra for the San Francisco Bay area, California, USA

We develop a partially nonergodic ground-motion model (GMM) for Fourier amplitude spectra for the San Francisco Bay Area, California, USA, using the Bayless and Abrahamson (2019) GMM as a reference ergodic GMM and developing location-dependent adjustments to the predicted median and variance. We compile regional ground-motion data from moment magnitude (𝑀 w ) >3 earthquakes occurring during 2000–2022 for which magnitude information is available in the U.S. Geological Survey Comprehensive Catalog (Guy et al., 2015). The data set predominantly consists of records from 𝑀 w 3.5–4.5 earthquakes but includes three well-recorded 𝑀 w > 5 events. Ground-motion residuals are evaluated using the time-averaged shear-wave velocity in the top 30 m (𝑉 S30 ) from the California-specific map of Thompson et al. (2018) and basin-depth site parameters from the seismic velocity model of Aagaard and Hirakawa (2021). The 𝑉 S30 dependence and basin-depth scaling of the reference ergodic GMM of Bayless and Abrahamson (2019) are evaluated and modified with the updated data set. We compute maps of site adjustments using a varying-coefficient model that considers the spatial correlation structure and uncertainties at each observation location. The spatial covariance model is developed using ground-motion residuals that are standardized by the uncertainty model, which allows for consideration of the aleatory variability in developing the site adjustments. The covariance model is fit considering the means and standard deviations of the site terms at all locations. The use of partially nonergodic median adjustments results in modified variance components of the within-event variability. Due to the low number of large-magnitude earthquakes that control seismic hazard in the data set, we do not modify between-event variance; however, we present adjustments to site-to-site variability for use in partially nonergodic hazard assessments.

California↗
USGS2021

Virginia and Landsat

From the shores of Jamestown and spreading north, south, and west, the lands that became the State of Virginia were some of the first in North America top experience rapid landscape change from European settlement. Imagery and data from the USGS Landsat series of satellites offer an unparalleled resource for the study, understanding, and preservation of Virginia’s land and water resources. From monitoring the health of water bodies to managing invasive species to planning for a range of climate change effects, the USGS National Land Imaging Program’s stewardship and public delivery of Landsat data have benefitted Virginians in myriad ways.

Virginia↗
USGS2025

Hydrogeology and groundwater quality in the Snake River alluvial aquifer at Jackson Hole Airport, Wyoming, 2011–20

The Snake River alluvial aquifer underlying the Jackson Hole Airport (JHA) in northwest Wyoming is an important source of water used for domestic, commercial, and irrigation purposes by the airport and nearby residents. The U.S. Geological Survey, in response to previously identified water-quality concerns in the area, monitored and evaluated changes in hydrogeologic characteristics and groundwater-quality conditions of the alluvial aquifer during 2011–20. During that period, the Jackson Hole Airport made several changes that potentially improved water quality at and downgradient from the airport. Well, water level, and hydrogeologic data were collected from the alluvial aquifer to identify hydrogeologic characteristic and groundwater quality changes. Additionally, results of statistical tests were applied to water-quality results to evaluate trends in selected physical properties and constituent concentrations with time. The trends of those data show that water quality did improve overall during the study period compared to previously collected data. Presumably, these trends are in response to the changes in the aircraft deicing/anti-icing fluid (ADAF) formulation used by the JHA, the many JHA infrastructure improvements made during 2011–20, the degradation of existing ADAFs in subsurface soils and groundwater, or some combination of these possibilities.

Wyoming↗
USGS2026

SlideDetect: Spatio-temporal landslide detection using a three-dimensional convolutional neural network

Landslides pose a serious and ongoing threat to both human lives and infrastructure worldwide; therefore, it is of interest to predict where and when landslides are likely to occur. Advances in machine learning techniques have spurred numerous studies aimed at estimating relative landslide propensity, but are limited to spatial (as opposed to temporal) prediction due to the sparsity of landslide timing data. We address this data gap by training SlideDetect, a 3-dimensional convolutional neural network (3D CNN), to identify landslides based on their spatial and temporal occurrence within multitemporal image stacks. We use an inventory of landsides triggered by the 2018 Hokkaido earthquake and two years of monthly composite optical imagery spanning this event. The model can identify not only landslide location but also landslide date with an area under the precision-recall curve (PR-AUC) of 0.84. We further present a new standard for presenting PR curve results that explicitly compares model performance at different confidence thresholds, allowing for clearer model evaluation and comparison. Our new approach to constraining landslide timing paired with this more consistent and objective method for evaluating model performance shows considerable promise, and with further application and testing, SlideDetect could enhance the data availability and tools needed to advance landslide hazard and risk assessments.

JGR Machine Learning and Computation↗
USGS2024

Shallow faulting and folding beneath south‐central Seattle, Washington State, from land‐based high‐resolution seismic‐reflection imaging

The geologic framework of the Seattle fault zone (SFZ) has been extensively studied, but the structure and fault strand locations in the central portion of the fault zone through the city of Seattle have remained controversial. Much of what is known about the SFZ has come from light detection and ranging (lidar)‐topographic surveys and paleoseismic investigations of fault scarps primarily west of Puget Sound, regional gravity and aeromagnetic modeling, and multiscale marine seismic imaging in waters both west and east of Seattle. We analyze ∼24 km of land‐based P ‐wave seismic‐reflection data that fill in a critical gap in our understanding of the SFZ beneath the urban areas of West Seattle, south‐central Seattle, and Mercer Island. These data image deformed strata in the upper 1 km, including upwarped Tertiary rock and younger sediments. Collectively, these data provide evidence for multiple Quaternary‐active thrust faults, back thrusts, and sub‐basins within the SFZ beneath the city of Seattle. The results indicate that multiple and potentially active back thrusts in the upper ∼500 m extend across the length of the SFZ and the entire urban corridor that may be analogous to those on Bainbridge Island west of Puget Sound.

Washington↗
USGS2025

Aeromagnetic and magnetotelluric imaging of west-central Idaho and the Stibnite-Yellow Pine mining district: A regional to district perspective

Aeromagnetic and magnetotelluric (MT) data are used to better understand the geology and mineral resources near the Stibnite-Yellow Pine mining district in central Idaho. The reduced-to-pole (RTP) transformation of regional-scale aeromagnetic data shows that allochthonous island-arc rocks west of the Salmon River suture are significantly more magnetic than the Laurentian continental rocks east of the suture and that the granitoids of the Idaho batholith have moderate to low magnetization in both early, metaluminous, and late, peraluminous phases. Application of tilt derivative to aeromagnetic data highlights major crustal-scale structures. The 5-km upward continued magnetic data indicate island-arc rocks have deep magnetic sources. The 110-km-long MT profile images resistivity structure to depths around 30 km. At shallow depths, resistivity corresponds to mapped geologic units, with moderate resistivities underlying volcanic and roof-pendant metasedimentary rocks and moderate to high resistivities occurring beneath the Idaho batholith. Crustal-scale moderate resistivities beneath the suture image the results of tectonomagmatic processes that accompanied suturing and translating allochthonous terranes. Low resistivity values beneath and fringing the batholith are derived from metasedimentary rocks that may have served as a melt source and reductant during melt generation and provided metals during later ore formation. In the Stibnite-Yellow Pine mining district, a high-resolution aeromagnetic compilation is shown to correlate with mapped lithologies and mineral deposit-related structures. The RTP transform distinguishes magnetic and nonmagnetic granitoid phases of the Idaho batholith. The tilt derivative highlights metasedimentary rocks, some of which are favorable ore hosts. The Meadow Creek fault hosts the Stibnite and Hangar Flats deposits and is imaged as a magnetic low due to hydrothermal alteration. Reconstructions of magnetic anomaly offsets and orebodies indicate around 3 km of post-95 Ma dextral separation, with some or all of the offset inferred to postdate the main Au mineralization episode (61–66 Ma).

Idaho↗
USGS2025

ARCHI: A new R package for automated imputation of regionally correlated hydrologic records

Missing data in hydrological records can limit resource assessment, process understanding, and predictive modeling. Here, we present ARCHI (Automated Regional Correlation Analysis for Hydrologic Record Imputation), a new, open-source software package in R designed to aggregate, impute, cluster, and visualize regionally correlated hydrologic records. ARCHI imputes missing data in “target” records by linear regression using more complete “reference” records as predictors. Automated imputation is implemented using a novel, iterative algorithm that allows each site to be considered a target or reference for regression, growing the pool of complete references with each imputed record until viable gap-filling ceases. Users can limit artifacts from spurious correlations by specifying model-acceptance criteria and applying geospatial, correlation, and group-based filters to control reference selection. ARCHI provides additional functions for visualizing results, clustering records with similar correlation structures, evaluating holdout data, and interactive parameterization with an accessible and intuitive graphical user interface (GUI). This methods brief provides an overview of the ARCHI package, modeling guidelines, and benchmarking on two regional groundwater-level datasets from the Central Valley, CA and Long Island, NY. We evaluate ARCHI alongside widely used multivariate imputation software to highlight and contextualize its computational efficiency, imputation accuracy, and model transparency when applied to large, groundwater-level datasets.

California, New York↗
USGS2026

Distributed faulting of the northern West Napa Fault Zone in Napa Valley, California

Mapped surface ruptures from the 24 August 2014 M w 6.0 South Napa earthquake in the Napa Valley, California, show a 2‐km‐wide zone of distributed faulting in the southern and central West Napa fault zone (WNFZ). In the northern WNFZ at Hendry Winery (HW), however, the mapped 2014 surface ruptures encompass an ∼100‐m‐wide zone, implying significant narrowing of the near‐surface fault zone to the north. We present a tomographic shear‐wave velocity ( ⁠⁠ V S ) model and guided‐wave data that indicate the northern WNFZ is at least 400‐m wide, with multiple near‐surface fault traces. Our V S model shows that the 2014 surface ruptures are underlain by discrete low‐velocity zones (LVZs), and coincident guided‐wave data show that the LVZs carry fault‐zone guided waves. If nearby (<500 m) mapped faults to the east of HW are part of the WNFZ, the entire WNFZ is more than 1 km wide in the northern Napa Valley. WNFZ guided waves travel up to 38% slower than S body waves, and low‐strain guided‐wave shaking is up to five times stronger than the associated body‐wave shaking. Our data suggest that guided waves, traveling along distributed faults, may result in an increased shaking hazard over a 1‐km‐wide area of the northern Napa Valley during future significant earthquakes. In places, the 2014 surface ruptures were difficult to find one year after the earthquake, and paleoseismic trenching showed only weak evidence for faulting, which may not have been identified in trenches if the locations of the 2014 surface ruptures had not been previously mapped ( Prentice et al. , 2015 ). Guided‐wave and V S tomography data, however, show strong evidence for faulting beneath the 2014 surface ruptures and at locations to the east. Although paleoseismic trenching is the gold standard for identifying near‐surface faulting, methods such as peak ground velocities of guided waves may better identify immature near‐surface fault traces.

California↗