Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Water Resources Summary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
USGS1972

Geohydrologic summary of the Pearl River basin, Mississippi and Louisiana

Fresh water in abundance is contained in large artesian reservoirs in sand and gravel deposits of Tertiary and Quaternary ages in the Pearl River basin, a watershed of 8,760 square miles. Shallow, water-table reservoirs occur in Quarternary deposits (Pleistocene and Holocene) that blanket most of the uplands in .the southern half of the basin and that are present in smaller upland areas and along streams elsewhere. The shallow reservoirs contribute substantially to dry-weather flow of the Strong River and Bogue Chitto and of Holiday, Lower Little, Silver, and Whitesand Creeks, among others. About 3 billion acre-feet of ground water is in storage in the fresh-water section, which extends from the surface to depths ranging from about sea level in the extreme northern part of the basin to more than 3,000 feet below sea level in the southern part of the basin. Variations in low flow for different parts of the river basin are closely related to geologic terrane and occurrence of ground water. The upland terrace belt that crosses the south-central part of the basin is underlain by permeable sand and gravel deposits and yields more than 0.20 cubic feet per second per square mile of drainage area to streamflow, whereas the northern part of the basin, underlain by clay, marl, and fine to medium sand, yields less than 0.05 cubic feet per second per square mile of drainage area (based on 7-day Q2 minimum flow computed from records). Overall, the potential surface-water supplies are large. Because water is available at shallow depths, most of the deeper aquifers have not been developed anywhere in the basin. At many places in the south, seven or more aquifers could be developed either by tapping one sand in each well or by screening two or more sands in a single well. Well fields each capable, of producing several million gallons of water a day are feasible nearly anywhere in the Pearl River basin. Water in nearly all the aquifers is of good to excellent quality and requires little or no treatment for most uses. The water is a soft, sodium bicarbonate type and therefore has a low to moderate dissolved-solids content. Mineral content increases generally downdip in an aquifer. Excessive iron, common in shallow aquifers, is objectionable for some water uses. Water from the streams, except in salty tidal reaches, is less mineralized than ground water; in 10 sites the median dissolved-solids content in streamflow was 50 milligrams per liter or less. Moderately intensive ground-water development has been made in the Bogalusa area, Louisiana; at the Mississippi Test Facility, Hancock County, Miss. ; and in the Jackson area, Mississippi. Wells with pumping rates of 500 to 1,000 gallons per minute each are common throughout the Pearl River basin, and some deep wells flow more than 3,000 gallons per minute in the coastal lowland areas. Probably 20 million gallons per day of artesian water flows uncontrolled from wells in the southern part of the basin. Ground-water levels, except in the higher altitudes, are within 60 feet of the surface, and flowing wells are common in the valleys and in the coastal Pine Meadows. Decline of water level is a problem in only a few small areas. Saline water as a resource is available for development from aquifers and streams near the coast and from aquifers at considerable depth in most of the Pearl River basin. Pollution is a problem in oil fields and in reaches of some streams below sewage and other waste-disposal points. The basin estuary contains water of variable quality but has potential for certain water-use developments that will require special planning and management.

Water Supply Paper↗
USGS2013

Statewide summary for Alabama

Alabama is over 132,000 km 2 (51,000 miles 2 ) in area, 483 km (300 miles) long, and 322 km (200 miles) wide (Copeland, 1968). Coastal Alabama comprises Mobile and Baldwin Counties and the surrounding State waters in the Gulf of Mexico (Figure 1; O’Neil and Mettee, 1982). It is part of both the East Gulf Coastal Plain section of the Coastal Plain province and the Mississippi-Alabama shelf section of the Continental Shelf province. Within the East Gulf Coastal Plain section, Alabama’s coastal land falls within the Southern Pine Hills and Coastal Lowlands subdivisions. The Southern Pine Hills subdivision is a sloping landscape composed of sand and clay. Its elevation varies from approximately 30 m (98 ft) near the coast to over 90 m (295 ft) in the northern areas of the two coastal counties. The Coastal Lowlands subdivision is a flat to slightly undulating plain with creeks, rivers, estuaries, and marshes leading to the surrounding bays and the Gulf of Mexico. Offshore Alabama is part of the Mississippi-Alabama section of the Continental Shelf. Barrier islands and spits in coastal Alabama include Dauphin Island, Fort Morgan Peninsula, and Perdido Key. Dauphin Island consists of a beach with dunes on the Gulf side and beaches and marshes on the north side. It was once over 24 km long, but after Hurricane Katrina it has been broken into two distinct islands. Fort Morgan Peninsula is attached to the eastern mainland and extends westward between Mobile Bay and the Gulf of Mexico. A large beach exists on the gulf side, with numerous lagoons and marshes on the bayside. Perdido Key is a narrow peninsula on the easternmost Alabama coast near the Alabama-Florida border, south of Perdido Bay. It consists of beaches and high dunes, with some marshes on the lagoon side of the peninsula. Mobile Bay, parts of Mississippi Sound, Perdido Bay, and many smaller rivers and streams are the main bodies of water in coastal Alabama. Mobile Bay, a submerged river valley, is the largest at 1,070 km 2 (413 miles 2 ) in area and 51.5 km (32 miles) in length (Mobile Bay NEP, 2008). Mobile Bay is 37 km (23 miles) wide at its maximum width near the opening to the Gulf of Mexico at the south end of the bay, and 16.1 km (10 miles) wide at the city of Mobile (Mobile Bay NEP, 2003; Mobile Bay NEP, 2008). It is remarkably shallow with an average depth of 3 m (10 ft), yet it discharges approximately 1,755.6 m 3 (62,000 ft 3 ) of water every second on average (Mobile Bay NEP, 2008). Mississippi Sound runs parallel to the coasts of Mississippi and part of Alabama. The length of the Alabama portion of Mississippi Sound is approximately 26 km (16.2 miles) from the Dauphin Island bridge to the Mississippi-Alabama State line (O’Neil and Mettee, 1982). Dauphin Island separates the sound from the Gulf of Mexico. The sound drains into the Gulf of Mexico west of Dauphin Island at Petit Bois Pass, which is approximately 8 km (5 miles) wide. Mississippi Sound averages approximately 3.5 m (11.5 ft) in depth. Salt marshes, large areas of wetland scrub-shrub, and tidal creeks characterize the northern shore of Mississippi Sound, and the southern shore is composed of sandy barrier islands. Perdido Bay is located at the boundary of Baldwin County and Florida’s Escambia County. It is approximately 27 km (16.8 miles) long, 5 km (3 miles) at its widest point, and, on average, 2.4 m (7.9 ft) deep. The major fresh-water resource in coastal Alabama is the Mobile River, formed by the confluence of the Alabama and Tombigbee Rivers. The watershed for the Mobile River is approximately 111,369 km 2 (43,000 miles 2 ) large and includes parts of Alabama, Georgia, Mississippi, and Tennessee (Handley et al., 2007). Parts of Alabama and the Florida Panhandle drain into the Perdido River basin and western coastal Alabama drains into the Escatawpa River. Emergent wetlands offer valuable ecological services in coastal Alabama. Marshes provide extensive plant material, which provides energy to the detritus-based estuarine ecological system (O’Neil et al., 1983). They provide habitat for many organisms, including shrimp and crabs, whose harvest is a major industry in coastal Alabama. Marshes provide habitat for refuge, feeding, breeding, and spawning. They also remove excess nutrients from water and contribute to erosion control. Degradation of marshes by pollutants, sediments, and other impacts decreases productivity of the entire estuarine ecosystem. Among the nation’s states, Alabama ranks fifth in number of different species (144 endemic species), second in number of extinctions that have already occurred (90 extinct species) and fourth in number of species at risk for extinction (14.8% at risk out of 4,533 total species; Stein, 2002). Many species of wildlife benefit from the wetland habitats in coastal Alabama. Numerous bird species can be found in coastal Alabama emergent marshes, which provide habitat for shore- and wading-birds that inhabit salt or brackish water coastal environments (Anderson et al., 1981). Colonial seabirds nest on coastal Alabama’s islands, the mainland, and dredge disposal sites (Cooley, 1987). The Mobile-Tensaw Delta and Mobile Bay are the state’s primary migratory waterfowl coastal wintering areas (U.S. Fish and Wildlife Service, 1982). The shallow waters, abundance of fish, and vegetative cover in emergent marsh contribute to excellent waterfowl habitat. Emergent wetlands in Alabama also provide habitat for a multitude of endangered species, including various species of raptors and wading- and shorebirds (O’Neil et al., 1983).

Alabama↗
USGS2002

Summary of Flow Loss between Selected Cross Sections on the Rio Grande in and near Albuquerque, New Mexico

The upper middle Rio Grande Basin, as defined by the U.S. Army Corps of Engineers, extends from the headwaters of the Rio Grande in southwestern Colorado to Fort Quitman, Texas. Most of the basin has a semiarid climate typical of the southwestern United States. This climate drives a highly variable streamflow regime that contributes to the complexity of water management in the basin. Currently, rapid population growth in the basin has resulted in increasing demands on the hydrologic system. Water management decisions have become increasingly complex because of the broad range of interests and issues. For these reasons, the U.S. Geological Survey, in cooperation with the City of Albuquerque, New Mexico, conducted paired flow measurements at two cross sections to determine cross-sectional loss in the Albuquerque reach of the Rio Grande. This report statistically summarizes flow losses in the Albuquerque reach of the Rio Grande during the winter nonirrigation season from December 1996 to February 2000. The two previous flow-loss investigations are statistically summarized. Daily mean flow losses are calculated for the winter nonirrigation season using daily mean flows at three selected Rio Grande streamflow-gaging stations.For the winter nonirrigation season cross-sectional measurements (1996-2000), an average of 210 cubic feet per second was returned to the river between the measurement sites, of which 165 cubic feet per second was intercepted by riverside drains along the 21.9-mile reach from the Rio Grande near Bernalillo to the Rio Grande at Rio Bravo Bridge streamflow-gaging stations. Total cross-sectional losses in this reach averaged about 90 cubic feet per second. Regression equations were determined for estimating downstream total outflow from upstream total inflow for all three paired measurement studies. Regression equations relating the three daily mean flow recording stations also were determined. In each succeeding study, additional outside variables were controlled, which provided more accurate flow-loss measurements. Regression-equation losses between measurement cross sections ranged from 1.9 to 7.9 percent during the nonirrigation season and from about 5.9 to 6.4 percent during the irrigation season. Mean and median loss by reach length for all three daily mean flow stations and all three cross-sectional measurement reaches showed consistent flow loss per mile by season with allowance for nonideal river conditions for the initial measurement studies. Unsteady measurement conditions were reflected in the regression equation mean-square errors and ultimately in the change in daily mean discharge at the Rio Grande at Albuquerque gaging station during the measurement periods.

Water-Resources Investigations Report↗
USGS2007

Strategic Plan for the North American Breeding Bird Survey: 2006-2010

Executive Summary The mission of the North American Breeding Bird Survey (BBS) is to provide scientifically credible measures of the status and trends of North American bird populations at continental and regional scales to inform biologically sound conservation and management actions. Determining population trends, relative abundance, and distributions of North American avifauna is critical for identifying conservation priorities, determining appropriate conservation actions, and evaluating those actions. The BBS program, jointly coordinated by the U.S. Geological Survey and Environment Canada’s Canadian Wildlife Service, provides the U.S. and Canadian Federal governments, state and provincial agencies, other conservation practitioners, and the general public with science-based avian population trend estimates and other information for regional and national species’ population assessments. Despite the demonstrated value of the BBS for furthering avian conservation across North America, its importance is often underappreciated, and it is underfunded compared with many other government-supported programs that report on status of the environment. Today, BBS resources, adjusted for inflation, are below the amount allocated in the 1970s and are still only sufficient to support two biologists. Yet the number of routes, participants, data, and data requests has quadrupled. Data and information management and delivery requirements and security concerns, non-existent in 1966, impose further demands on BBS resources. In addition, the Mexican expansion of the BBS offers new hope for a truly continental approach to avian conservation, but also brings additional challenges. Meeting the goals of this plan will take cooperation among myriad stakeholders; yet, even with collaboration, most objectives of this plan will be unattainable if BBS program support is not increased. The BBS developed this strategic plan to help set priorities and identify resources required for the program to continue to meet the evolving needs of the conservation community for information on bird population change. By setting clear goals, strategies, and measures of success, this plan provides a cohesive framework and vision for maintenance and development of the BBS. The plan identifies two major goals for the BBS, with a number of strategies and objectives to achieve these goals. Over the next 5 years, progress made in addressing each long-term goal and its associated 5-year strategies and objectives will gage the plan’s success. Specific actions, projected outcomes, and measures of success related to accomplishing these are outlined in Table 1, with a timeline in Table 2. The two main goals for the program, with a summary of the strategies to achieve them, are: Goal 1: Collect scientifically credible measures of the status and trends of North American bird populations at continental and regional scales. The North American Breeding Bird Survey will continue to support North American natural resource conservation through the collection of scientifically credible measures of the status and trends of continental bird populations. While doing this, the BBS will work to improve the science behind the program to better meet its mission and the changing needs of the avian conservation community. In partnership with collaborators, the BBS will address detection probability bias and habitat bias, improve analytical methods, and more fully assess and account for observer quality. Moreover, the BBS will improve the quality and breadth of avian population data through strategic increases in route density and the establishment of a Mexican BBS program. Goal 2: Ensure BBS data and analytical results are widely available and easily accessible for use by the avian conservation and management communities. At the heart of the BBS lies a four-million-record database containing more than 40 years of data on more than 600 bird species. These data are of no value if not well maintained, appropriately analyzed, and widely and easily accessible. The USGS has greatly improved data management and accessibility in recent years. Trend estimates were first made available via the Internet in the mid-1990s, followed closely by the raw data with baseline metadata and standard operating procedures. Nevertheless, numerous enhancements to data management and the usability of BBS results will greatly improve the ability of the BBS to serve avian conservation goals. The BBS needs to ensure that BBS data and results presented on the web site use the best data-management practices and statistical methods, with adequate documentation for users to understand them and any differences between different trend estimates. Moreover, the BBS needs to increase communication with BBS partners and stakeholders to ensure that it continues to meet the avian population status and trends needs of the conservation community and to encourage the development of new products. Working with collaborators, the BBS will develop tools for integrating environmental parameters like habitat change into the analyses, and for integrating BBS data with other avian survey results. In addition, the BBS will continue to improve data and database management through the incorporation of additional data and data fields, such as georeferenced stop locations and more complete metadata for the raw data and results, thus enhancing the uses that can be made of the data.

Circular↗
USGS1997

Water-quality assessment of the Rio Grande Valley, Colorado, New Mexico, and Texas: Summary and analysis of water-quality data for the basic-fixed-site network, 1993-95

The Rio Grande Valley study unit of the U.S. Geological Survey National Water-Quality Assessment Program collected monthly water- quality samples at a network of surface-water sites from April 1993 through September 1995. This basic-fixed-site network consisted of nine main-stem sites on the Rio Grande, five sites on tributaries of the Rio Grande, two sites on streams in the Rio Grande Valley study unit that are not directly tributary to the Rio Grande, and one site on a conveyance channel. During each monthly sampling, field properties were measured and samples were collected for the analysis of dissolved solids, major constituents, nutrients, selected trace elements, and suspended-sediment concentrations. During selected samplings, supplemental samples were collected for the analysis of additional trace elements, organic carbon, and/or pesticides. Spatial variations of dissolved-solids, major-constituent, and nutrient data were analyzed. The report presents summary statistics for the monthly water-quality data by sampling site and background information on the drainage basin upstream from each site. Regression equations are presented that relate dissolved-solids, major-constituent, and nutrient concentrations to streamflow, selected field properties, and time. Median instantaneous streamflow at each basic-fixed site ranged from 1.4 to 1,380 cubic feet per second. Median specific conductance at each basic-fixed site ranged from 84 to 1,680 microsiemens per centimeter at 25 degrees Celsius, and median pH values ranged from 7.8 to 8.5. The water sampled at the basic-fixed sites generally was well oxygenated and had a median dissolved-oxygen percent of saturation range from 89 to 108. With the exception of Rio Grande above mouth of Trinchera Creek, near Lasauses, Colorado, dissolved-solids concentrations in the main stem of the Rio Grande generally increased in a downstream direction. This increase is from natural sources such as ground-water inflow and evapotranspiration and from anthropogenic sources such as irrigation- return flows, urban runoff, and wastewater-treatment plant discharges. The smallest median dissolved-solids concentration detected at a basic- fixed site was 58 milligrams per liter and the largest was 1,240 milligrams per liter. The spatial distribution of calcium, magnesium, sodium, sulfate, chloride, and fluoride was similar to the spatial distribution of dissolved solids. The spatial distribution of potassium and bicarbonate varied slightly from that of dissolved solids. Median silica concentrations generally decreased in a downstream direction. Of all cations, calcium and sodium had the largest concentrations at most basic-fixed sites. Bicarbonate and sulfate were the anions having the largest concentrations at most sites. The largest median silica concentration was at Rito de los Frijoles in Bandelier National Monument, New Mexico, where silica composed approximately 50 percent of the dissolved solids. The largest concentrations and largest median concentrations of dissolved-nutrient analytes were detected at Santa Fe River above Cochiti Lake, New Mexico, and Rio Grande at Isleta, New Mexico. The relatively large dissolved-nutrient concentrations at these sites probably were due to discharges from wastewater-treatment plants and urban runoff. The largest concentrations and largest median concentrations of total ammonia plus organic nitrogen and total phosphorus were detected at Rio Puerco near Bernardo, New Mexico. The largest concentrations of these nutrients at this site were associated with runoff from summer thunderstorms. Dissolved-iron concentrations ranged from censored concentrations to 914 micrograms per liter. Median dissolved-iron concentrations ranged from 3 to 160 micrograms per liter.

Colorado, New Mexico, Texas↗
USGS1996

Summary of the Oahu, Hawaii, regional aquifer-system analysis

Oahu, the third largest of the Hawaiian islands, is formed by the eroded remnants of two elongated shield volcanoes with broad, low profiles. Weathering and erosion have modified the original domed surfaces of the volcanoes, leaving a landscape of deep valleys and steep interfluvial ridges in the interior highlands. The Koolau Range in eastern Oahu and the Waianae Range in western Oahu are the eroded remnants of the Koolau and Waianae Volcanoes. The origin, mode of emplacement, texture, and composition of the rocks of Oahu affect their ability to store and transmit water. The volcanic rocks are divided into four groups: (1) lava flows, (2) dikes, (3) pyroclastic deposits, and (4) saprolite and weathered basalt. Stratified sequences of thin-bedded lava flows form the most productive aquifers in Hawaii. Dikes are near-vertical sheets of massive intrusive rock that typically contain only fracture permeability. Pyroclastic deposits include ash, cinder, and spatter; they are essentially granular, with porosity and permeability similar to those of granular sediments. Weathering of basaltic rocks in the humid, subtropical climate of Oahu alters igneous minerals to clays and oxides, reducing the permeability of the parent rock. Saprolite is weathered material that has retained textural features of the parent rock. Estimates of hydraulic conductivity along the plane of dike-free lava flows tend to fall within about one order of magnitude, from about 500 to about 5,000 feet per day. Estimates of specific yield range from about 1 to 20 percent; most of the values lie within a narrow range of about 5 to 10 percent. The occurrence of ground water on Oahu is determined by the type and character of the rocks and by the presence of geohydrologic barriers. The primary modes of freshwater occurrence on Oahu are as a basal lens of fresh ground water floating on saltwater, as dike-impounded ground water, and as perched ground water. Saltwater occurs at depth throughout much of the island. A regional aquifer system composed of the Waianae aquifer in the Waianae Volcanics and the Koolau aquifer in the Koolau Basalt is subdivided into well-defined areas by geohydrologic barriers. The aquifers are separated by the Waianae confining unit formed by weathering along the Waianae-Koolau unconformity. In some coastal areas, a caprock of sedimentary deposits overlies and confines the aquifers. The island of Oahu has been divided into seven major ground-water areas delineated by deep-seated structural geohydrologic barriers; these areas are further subdivided by shallower internal barriers to ground-water flow. The Koolau rift zone along the eastern (windward) side of the island and the Waianae rift zone to the west (Waianae area) constitute two of the major ground-water areas. North-central Oahu is divided into three smaller ground-water areas, Mokuleia, Waialua, and Kawailoa. The Schofield ground-water area encompasses much of the Schofield Plateau of central Oahu. Southern Oahu is divided into six areas, Ewa, Pearl Harbor, Moanalua, Kalihi, Beretania, and Kaimuki. Southeastern Oahu is divided into the Waialae and Wailupe-Hawaii Kai areas. Along the northeast coast of windward Oahu is the Kahuku ground-water area. The aquifers of Oahu contain shallow freshwater and deeper saltwater flow systems. There are five fresh ground-water flow systems: meteoric freshwater flow diverges from ground-water divides that lie somewhere within the Waianae and Koolau rift zones, forming an interior flow system in central Oahu (which is divided into the northern and southern Oahu flow systems) and exterior flow systems in western (Waianae area) Oahu, eastern (windward) Oahu, and southeastern Oahu. Development of the ground-water resources on Oahu began when the first well was drilled near Honouliuli in the summer of 1879. By 1890, 86 wells had been drilled on the island. From about 1891 to about 1910, development increased rapidly with the drilling of a

Hawaii↗
USGS1993

Geologic setting and water quality of selected basins in the active coal-mining areas of Ohio, 1989-91, with a summary of water quality for 1985-91

This report presents streamwater- and ground-water-quality data collected to characterize the baseline water quality for 21 drainage basins in the coal-mining region of eastern Ohio. The study area is mostly within the unglaciated part of eastern Ohio along the western edge of the Appalachian Plateaus Physiographic Province. The data collected from 1989-91 and presented in this report represent the third and final phase of a 7-year study to assess baseline water quality in Ohio's coal region during 1985-1991. During 1989-91, 246 samples from 41 streamwater sites were collected periodically from a long-term site network. Ranges and medians of measurements made at the long-term streamwater sites were following: specific conductance, 270 to 5,170 and 792 microsiemens per centimeter at 25 degrees Celsius; pH, 2.7 to 9.1 and 7.8; alkalinity, 1 to 391 and 116 mg/L (milligrams per liter). Ranges and medians of laboratory analyses of the same samples were the following: dissolved sulfate, 13 to 2,100 and 200 mg/L; dissolved aluminum, <10 to 17,000 and 300 ? /L (micrograms per liter); dissolved iron, <10 to 53,000 and 60 ? /L; and dissolved manganese, <10 to 17,000 and 295 ? /L. The ranges for concentrations of total recoverable aluminum, iron, and manganese were similar to the ranges of concentrations found for dissolved constituents. Medians of total recoverable aluminum and iron were about 10 times greater than the medians of dissolved aluminum and iron. During 1989-91, once-only sample collections were done at 45 streamwater sites in nine basins chosen for synoptic sampling. At several sites in the Middle Hocking River basin and Leading Creek basin, water had low pH and high concentrations of dissolved aluminum, iron and manganese. These water-quality characteristics are commonly associated with ace mine drainage. Throughout the entire 7-year study (1985-91), medians for most constituents at the long-term streamwater-sampling sites were fairly consistent, despite the geographic diversity of the study area. Waters from several long-term sites, including several sites in Moxahala Creek and Middle Hocking River basins, had low pH and high concentrations of several constituents, including dissolved sulfate, iron, aluminum, and manganese; this combinations characteristics is indicitive of acid drainage from surface-mining operations. At many of the streamwater sites where concentration of these constituents were high, pH values in the neutral or alkaline range were indicative of stream buffering by carbonate rock or restoration of mined lands in the drainage system. The basins with sites in this category include Yellow and Cross Creeks and Wheeling Creek basins. Water quality at other sites showed little or no effects from surface mining. Ground-water samples collected during the last phase of the study (1989-91) were mostly from unconsolidated aquifers. The waters were generally hard to very hard and calcium bicarbonate in type. During the entire 7-year study period, medians of pH in ground-water samples varied little, and most values were in the alkaline range. Except for a few sites where concentrations of dissolved sulfate exceeded 250 mg/L and concentrations of total recoverable and dissolved iron and manganese exceeded 1,000 ? /L, the quality of ground water at the wells sampled in the study area showed little effect from coal mining.

Water-Resources Investigations Report↗
USGS2022

Rapidly assessing social characteristics of drought preparedness and decision making: A guide for practitioners

Executive Summary This guide is intended to provide managers, decision makers, and other practitioners with advice on conducting a rapid assessment of the social dimensions of drought. Findings from a rapid assessment can provide key social context that may aid in decision making, such as when preparing a drought plan, allocating local drought resilience funding, or gathering the support of local agencies and organizations for collective action related to drought mitigation. Part I —In the introduction to Part I, we describe the unique problems associated with drought—particularly its slow onset and long duration, which make it difficult to define drought—and highlight five major types of drought (see Box 1). We introduce a few social dimensions of drought (such as economic and institutional perspectives), demonstrate how these dimensions can be interrelated, and describe a few of the modern challenges (such as transformational change and cascading risks) that practitioners face. We also provide background on the rapid assessment method, first describing it as a “snapshot” of the social landscape, then providing some key advantages of the method (it can be quicker and cheaper than more in-depth methods), and lastly describing how secondary data and other methods can help overcome some of the disadvantages of rapid assessments. Then, after summarizing the process of developing this guide, we outline the process of using the guide. Importantly, we compare the guide to a travel guide, which provides many different types of information and is best approached with specific interests in mind. Ultimately, we hope for this guide to be malleable enough that it can be helpful to researchers and practitioners in many different contexts, using many different research methods. Related to how to use the guide, we characterize the type of person who might be motivated to use this guide. We also specify key qualifications for a researcher conducting a rapid assessment, drawing particular attention to training on ethical considerations. We sketch out key considerations when choosing social dimensions of drought to focus on, and the type of data used for analysis. First, it is important to note that in this guide we provide nine important social dimensions of drought, but this is by no means a comprehensive list, and a researcher may find that other dimensions better fit their local context. Second, we provide some pros and cons to a narrow (focusing on just a few dimensions or at a smaller scale) versus broad research focus. Lastly, we describe the pros and cons of using primary versus secondary data (one strategy is to use both, sequentially) and qualitative versus quantitative data. Ultimately, Part I of this guide functions as an exploration of the various decisions a researcher will make when designing a rapid assessment. These decisions will inform the type of findings and other outcomes that result from the rapid assessment. Part II —Part II of this guide introduces nine key social dimensions of drought: defining the problem of drought, individual perceptions, social relationships, technology, economics and livelihoods, water governance, decision making, information, and social vulnerability. Each section provides background and key considerations related to a particular dimension, as well as ideas for how to explore the dimension via a rapid assessment. Part III —Part III of this guide provides two hypothetical examples of how one might use this guide to aid the practitioner in implementing the lessons learned here. In the first example, a watershed group uses two dimensions, defining the problem of drought and social relationships, to inform a community meeting about protecting fisheries from drought. In the second example, a resource manager uses the economics and livelihoods and social vulnerability dimensions to inform the development of a livestock grazing drought management plan.

Techniques and Methods↗
USGS1997

Summary of information on aquatic biota and their habitats in the Willamette Basin, Oregon, through 1995

Available information on aquatic biota of the Willamette Basin was reviewed and summarized to describe current and historical conditions as part of the U.S. Geological Survey's National Water-Quality Assessment Program. Biological parameters emphasized include the status, distribution, and trends of aquatic biota, particularly algae, macroinvertebrates, and fish; the condition of aquatic and riparian habitat in which these biota reside; and the response of these biota to natural and human-associated impacts, including the level, type, and effect of contaminants. Considerable data are available on aquatic biota in the Willamette Basin, although the information is highly uneven relative to taxa and spatial scope. Extensive information exists for high-profile taxa, such as salmonid fishes, but less information is available for macroinvertebrates, and relatively little data exist for algae. Additionally, some areas such as the H.J. Andrews Experimental Forest and the main stem Willamette River have been extensively studied, whereas data are limited for many other areas. The basin supports a diverse aquatic macroinvertebrate fauna. Available data indicate a relatively high diversity of taxa and a high richness of Ephemeroptera, Plecoptera, Trichoptera (EPT) taxa in the upper reaches of the basin. In the lower main stem reaches, macroinvertebrate assemblages are dominated by pollution tolerant organisms and those adapted to low dissolved oxygen levels. Most of the limited data on algae are from sampling in the main stem Willamette River. Diatoms and blue-green algae are the dominant algal forms. Approximately 61 fish species occur in the basin, although nearly half are introduced. Species richness and distribution are highly correlated with elevation, stream gradient, and water temperature. High elevation, cold water, mountain streams are characterized by a few species of salmonids, sculpins, suckers, and whitefish. Low elevation, main stem reaches of major rivers and streams are dominated by warm water species, such as bass, catfish, and several species in the pan fish group. The only species of fish listed as threatened or endangered is the Oregon chub (Oregonichthys crameri). The effect of an expanding human presence in the Willamette Basin has substantially altered aquatic and riparian habitats, and the biota that use or reside in these habitats. Construction of dams, channelization and bank stabilization of rivers, species introductions, supplementations of fisheries through aquaculture, timber harvesting, agricultural activities, and urbanization have contributed to changes in aquatic habitats and biota from historical conditions. Aquatic toxicological investigations in the basin have focused primarily on fish. These studies have addressed chlorinated pesticides, polychlorinated biphenyls (PCBs), dioxins and furans, polycyclic aromatic hydrocarbons (PAHs), and trace elements in aquatic tissue, as well as fish health assessments, skeletal abnormalities, and aquatic toxicological responses. Several pesticides exceeded U.S. Environmental Protection Agency and State water-quality criteria for the protection of aquatic life. Elevated PCB, dioxin, and furan concentrations were associated with point sources, such as pulp and paper mills. Elevated concentrations of mercury in aquatic tissue were associated with several reservoirs. Fish health assessments and skeletal abnormality studies detected high levels of abnormalities in fish from the main stem Willamette River. Few investigations have examined aquatic toxicological responses, such as enzyme induction assays, growth assays, and biomarker studies.

Oregon↗
USGS2013

Modeled future peak streamflows in four coastal Maine rivers

To safely and economically design bridges and culverts, it is necessary to compute the magnitude of peak streamflows that have specified annual exceedance probabilities (AEPs). Annual precipitation and air temperature in the northeastern United States are, in general, projected to increase during the 21st century. It is therefore important for engineers and resource managers to understand how peak flows may change in the future. This report, prepared in cooperation with the Maine Department of Transportation (MaineDOT), presents modeled changes in peak flows at four basins in coastal Maine on the basis of projected changes in air temperature and precipitation. To estimate future peak streamflows at the four basins in this study, historical values for climate (temperature and precipitation) in the basins were adjusted by different amounts and input to a hydrologic model of each study basin. To encompass the projected changes in climate in coastal Maine by the end of the 21st century, air temperatures were adjusted by four different amounts, from -3.6 degrees Fahrenheit (ºF) (-2 degrees Celsius (ºC)) to +10.8 ºF (+6 ºC) of observed temperatures. Precipitation was adjusted by three different percentage values from -15 percent to +30 percent of observed precipitation. The resulting 20 combinations of temperature and precipitation changes (includes the no-change scenarios) were input to Precipitation-Runoff Modeling System (PRMS) watershed models, and annual daily maximum peak flows were calculated for each combination. Modeled peak flows from the adjusted changes in temperature and precipitation were compared to unadjusted (historical) modeled peak flows. Annual daily maximum peak flows increase or decrease, depending on whether temperature or precipitation is adjusted; increases in air temperature (with no change in precipitation) lead to decreases in peak flows, whereas increases in precipitation (with no change in temperature) lead to increases in peak flows. As the magnitude of air temperatures increase in the four basins, peak flows decrease by larger amounts. If precipitation is held constant (no change from historical values), 17 to 26 percent decreases in peak flow occur at the four basins when temperature is increased by 7.2°F. If temperature is held constant, 26 to 38 percent increases in peak flow result from a 15-percent increase in precipitation. The largest decreases in peak flows at the four basins result from 15-percent decreases in precipitation combined with temperature increases of 10.8°F. The largest increases in peak flows generally result from 30-percent increases in precipitation combined with 3.6 °F decreases in temperatures. In many cases when temperature and precipitation both increase, small increases or decreases in annual daily maximum peak flows result. For likely changes projected for the northeastern United States for the middle of the 21st century (temperature increase of 3.6 °F and precipitation increases of 0 to 15 percent), peak-flow changes at the four coastal Maine basins in this study are modeled to be evenly distributed between increases and decreases of less than 25 percent. Peak flows with 50-percent and 1-percent AEPs (equivalent to 2-year and 100-year recurrence interval peak flows, respectively) were calculated for the four basins in the study using the PRMS-modeled annual daily maximum peak flows. Modeled peak flows with 50-percent and 1-percent AEPs with adjusted temperatures and precipitation were compared to unadjusted (historical) modeled values. Changes in peak flows with 50-percent AEPs are similar to changes in annual daily maximum peak flow; changes in peak flows with 1-percent AEPs are similar in pattern to changes in annual daily maximum peak flow, but some of the changes associated with increasing precipitation are much larger than changes in annual daily maximum peak flow. Substantial decreases in maximum annual winter snowpack water equivalent are modeled to occur with increasing air temperatures at the four basins in the study. (Snowpack is the snow on the ground that accumulates during a winter, and water equivalent is the amount of water in a snowpack if it were melted.) The decrease in modeled peak flows with increasing air temperature, given no change in precipitation amount, is likely caused by these decreases in winter snowpack and resulting decreases in snowmelt runoff. This Scientific Investigations Report, prepared in cooperation with the Maine Department of Transportation, presents a summary of modeled changes in peak flows at four basins in coastal Maine on the basis of projected changes in air temperature and precipitation. The full Fact Sheet (Hodgkins and Dudley, 2013) is available at http://pubs.usgs.gov/fs/2013/3021/.

Maine↗
USGS2001

Metal loading in Soda Butte Creek upstream of Yellowstone National Park, Montana and Wyoming; a retrospective analysis of previous research; and quantification of metal loading, August 1999

Acid drainage from historic mining activities has affected the water quality and aquatic biota of Soda Butte Creek upstream of Yellowstone National Park. Numerous investigations focusing on metals contamination have been conducted in the Soda Butte Creek basin, but interpretations of how metals contamination is currently impacting Soda Butte Creek differ greatly. A retrospective analysis of previous research on metal loading in Soda Butte Creek was completed to provide summaries of studies pertinent to metal loading in Soda Butte Creek and to identify data gaps warranting further investigation. Identification and quantification of the sources of metal loading to Soda Butte Creek was recognized as a significant data gap. The McLaren Mine tailings impoundment and mill site has long been identified as a source of metals but its contribution relative to the total metal load entering Yellowstone National Park was unknown. A tracer-injection and synoptic-sampling study was designed to determine metal loads upstream of Yellowstone National Park. A tracer-injection and synoptic-sampling study was conducted on an 8,511-meter reach of Soda Butte Creek from upstream of the McLaren Mine tailings impoundment and mill site downstream to the Yellowstone National Park boundary in August 1999. Synoptic-sampling sites were selected to divide the creek into discrete segments. A lithium bromide tracer was injected continuously into Soda Butte Creek for 24.5 hours. Downstream dilution of the tracer and current-meter measurements were used to calculate the stream discharge. Stream discharge values, combined with constituent concentrations obtained by synoptic sampling, were used to quantify constituent loading in each segment of Soda Butte Creek. Loads were calculated for dissolved calcium, silica, and sulfate, as well as for dissolved and total-recoverable iron, aluminum, and manganese. Loads were not calculated for cadmium, copper, lead, and zinc because these elements were infrequently detected in mainstem synoptic samples. All of these elements were detected at high concentrations in the seeps draining the McLaren Mine tailings impoundment. The lack of detection of these elements in the downstream mainstem synoptic samples is probably because of sorption (coprecipitation and adsorption) to metal colloids in the stream. Most of the metal load that entered Soda Butte Creek was contributed by the inflows draining the McLaren Mine tailings impoundment (between 505 meters and 760 meters downstream from the tracer-injection site), Republic Creek (1,859 meters), and Unnamed Tributary (8,267 meters). Results indicate that treatment or removal of the McLaren Mine tailings impoundment would greatly reduce metal loading in Soda Butte Creek upstream of Yellowstone National Park. However, removing only that single source may not reduce metal loads to acceptable levels. The sources of metal loading in Republic Creek and Unnamed Tributary merit further investigation.

Montana, Wyoming↗
USGS2001

Summary of and factors affecting pesticide concentrations in streams and shallow wells of the lower Susquehanna River basin, Pennsylvania and Maryland, 1993-95

This report presents the detection frequency of 83 analyzed pesticides, describes the concentrations of those pesticides measured in water from streams and shallow wells, and presents conceptual models of the major factors affecting seasonal and areal patterns of pesticide concentrations in water from streams and shallow wells in the Lower Susquehanna River Basin. Seasonal and areal patterns of pesticide concentrations were observed in 577 samples and nearly 40,000 pesticide analyses collected from 155 stream sites and 169 shallow wells from 1993 to 1995. For this study, shallow wells were defined as those generally less than 200 feet deep. The most commonly detected pesticides were agricultural herbicides?atrazine, metolachlor, simazine, prometon, alachlor, and cyanazine. Atrazine and metolachlor are the two most-used agricultural pesticides in the Lower Susquehanna River Basin. Atrazine was detected in 92 percent of all the samples and in 98 percent of the stream samples. Metolachlor was detected in 83 percent of all the samples and in 95 percent of the stream samples. Nearly half of all the analyzed pesticides were not detected in any sample. Of the 45 pesticides that were detected at least once, the median concentrations of 39 of the pesticides were less than the detection limit for the individual compounds, indicating that for at least 50 percent of the samples collected, those pesticides were not detected. Only 10 (less than 0.025 percent) of the measured concentrations exceeded any established drinking-water standards; 25 concentrations exceeded 2 mg/L (micrograms per liter) and 55 concentrations exceeded 1 mg/L. None of the elevated concentrations were measured in samples collected from streams that are used for public drinking-water supplies, and 8 of the 10 were measured in storm-affected samples. The timing and rate of agricultural pesticide applications affect the seasonal and areal concentration patterns of atrazine, simazine, chlorpyrifos, and diazinon observed in water from wells and streams in the Lower Susquehanna River Basin. Average annual pesticide use for agricultural purposes and nonagricultural pesticide use indicators were used to explain seasonal and areal patterns. Elevated concentrations of some pesticides in streams during base-flow and storm-affected conditions were related to the seasonality of agricultural-use applications and local climate conditions. Agricultural-use patterns affected areal concentration patterns for the high-use pesticides, but indicators of nonagricultural use were needed to explain concentration patterns of pesticides with smaller amounts used for agricultural purposes. Bedrock type influences the movement and discharge of ground water, which in turn affects concentration patterns of pesticides. The ratio of atrazine concentrations in stream base flow to concentrations in shallow wells varied among the different general rock types found in the Lower Susquehanna River Basin. Median concentrations of atrazine in well water and stream base flow tended to be similar in individual areas underlain by carbonate bedrock, indicating the connectivity of water in streams and shallow wells in these areas. In areas underlain by noncarbonate bedrock, median concentrations of atrazine tended to be significantly higher in stream base flow than in well water. This suggests a deep ground-water system that delivers water to shallow wells and a near-surficial system that supplies base-flow water to streams. In addition to the presence or absence of carbonate bedrock, pesticide leaching potential and persistence, soil infiltration capacity, and agricultural land use affected areal patterns in detection frequency and concentration differences between samples collected from streams during base-flow conditions and shallow wells.

Water-Resources Investigations Report↗
USGS1996

Water-quality assessment of the Ozark Plateaus study unit, Arkansas, Kansas, Missouri, and Oklahoma — Summary of information on pesticides, 1970–90

Historical pesticide data from 1970-90 were compiled for 140 surface-water, 92 ground-water, 55 streambed-sediment, and 120 biological-tissue sampling sites within the Ozark Plateaus National Water-Quality Assessment Program study unit. Surface-water, bed-sediment, and biological-tissue sites have drainage basins predominantly in the Springfield and Salem Plateaus; ground-water sites are predominantly located in the Osage Plains and Mississippi Alluvial Plain. Many sites were sampled only once or twice during this period. A large percentage of the samples were collected in the mid-1970's and early 1980's for surface water, 1990 for ground water, the late 1980's for surface water, 1990 for ground water, the late 1980's for bed sediment, and the early 1980's for biological tissue. Pesticide use was approximately 4.2 million pounds per year of active ingredients from 1982-85 in the study unit and was generally greatest in the Springfield and Salem Plateaus pasturelands and in the Osage Plains and Mississippi Alluvial Plain cropland areas. The most frequently applied pesticide in the study unit was 2,4-D. Alachlor was the second most applied pesticide. Corn, pasture, rice, sorghum, and soybeans received approximately 90 percent of the pesticides applied within the study unit. The highest pesticide application rate per acre occurred on these crops in the Osage Plains and Mississippi Alluvial Plain. Pastureland was the predominant crop type in 50 of the 94 counties in the study unit. Toxaphene, the pesticide having the most number of detections in surface water, was found in 17 of 866 samples from 5 of 112 sites. Concentrations ranged from 0.1 to 6.0 micrograms per liter. Six other pesticides or pesticide metabolites were detected in 12 or more surface-water samples: DDE, dieldrin, DDT, aldrin, 2,4-D, and lindane. The maximum concentration for these pesticides was less than 1.0 micrograms per liter. Atrazine, the pesticide having the most number of detections in ground water, was found in 15 of 95 samples from 15 of 79 wells with concentrations ranging from 0.1 to 8.2 micrograms per liter. Metolachlor, alachlor, and prometon were detected more than once with maximum concentrations less than 1.0 micrograms per liter, except for prometon (2.4 micrograms per liter). Chlordane was the pesticide having the most number of detections in bed sediment and biological tissue. Chlordane was detected in 12 of 73 samples from 10 of 45 bed-sediment sites with concentrations ranging from 2.0 to 240 micrograms per kilogram. In biological tissue, chlordane was found in 93 of 151 samples from 39 of 53 sites with concentrations ranging from 0.009 to 8.6 milligrams per kilogram. Other pesticides or pesticide metabolites detected more than once in bed sediment include DDT, DDD, p,p'-DDE, DDE, and hexachlorobenzene and in biological tissue include DDT, p,p'-DDE, and hexachlorobenzene. Quality criteria or standards have been established for 15 of the pesticides detected in the study unit. For surface-water samples, the drinking water maximum contaminant level for alachlor was exceeded in one sample from one site in 1982. For ground-water samples, the drinking water maximum contaminant level for atrazine was exceeded in four samples from four wells in 1990. For biological-tissue samples collected during the years 1982-89, the fish tissue action levels for chlordane (19 sites; 26 samples), heptachlor epoxide (3 sites; 3 samples), p,p'-DDE (2 sites; 2 samples), dieldrin (2 sites, 2 samples), and mirex (1 site; 1 sample) were exceeded. For bed-sediment samples, quality criteria or standards were not exceeded for any pesticide. Pesticides do not pose any widespread or persistent problems in the study unit, based on the limited number of samples that exceeded quality criteria and standards.

Arkansas, Kansas, Missouri, Oklahoma↗
USGS1994

Summary and interpretation of dye-tracer tests to investigate the hydraulic connection of fractures at a ridge-and-valley-wall site, near Fishtrap Lake, Pike County, Kentucky

Dye-tracer tests were done during 1985-92 to investigate the hydraulic connection between fractures in Pennsylvanian coal-bearing strata at a ridge-and-valley-wall site near Fishtrap Lake, Pike County, Ky. Fluorescent dye was injected into a core hole penetrating near-surface and mining-induced fractures near the crest of the ridge. The rate and direction of migration of dye in the subsurface were determined by measuring the relative concentration of dye in water samples collected from piezometers completed in conductive fracture zones and fractured coal beds at various stratigraphic horizons within the ridge. Dye-concentration data and water-level measurements for each piezometer were plotted as curves on dye-recovery hydrographs. The dye-recovery hydrographs were used to evaluate trends in the fluctuation of dye concentrations and hydraulic heads in order to identify geologic and hydrologic factors affecting the subsurface transport of dye. The principal factors affecting the transport of dye in the subsurface hydrologic system were determined to be (1) the distribution, interconnection, and hydraulic properties of fractures; (2) hydraulic-head conditions in the near-fracture zone at the time of dye injection; and (3) subsequent short- and long-term fluctuations in recharge to the hydrologic system. In most of the dye-tracer tests, dye-recovery hydrographs are characterized by complex, multipeaked dye-concentration curves that are indicative of a splitting of dye flow as ground water moved through fractures. Intermittent dye pulses (distinct upward spikes in dye concentration) mark the arrivals of dye-labeled water to piezometers by way of discrete fracture-controlled flow paths that vary in length, complexity, and hydraulic conductivity. Dye injections made during relatively high- or increasinghead conditions resulted in rapid transport of dye (within several days or weeks) from near-surf ace fractures to piezometers. Injections made during relatively low- or decreasing-head conditions resulted in dye being trapped in hydraulically dead zones in water-depleted fractures. Residual dye was remobilized from storage and transported (over periods ranging from several months to about 2 years) by increased recharge to the hydrologic system. Subsequent fluctuations in hydraulic gradients, resulting from increases or decreases in recharge to the hydrologic system, acted to speed or slow the transport of dye along the fracture-controlled flow paths. The dye-tracer tests also demonstrated that mining-related disturbances significantly altered the natural fracture-controlled flow paths of the hydrologic system over time. An abandoned underground mine and subsidence-related surface cracks extend to within 250 ft of the principal dye-injection core hole. Results from two of the dye-tracer tests at the site indicate that the annular seal in the core hole was breached by subsurface propagation of the mining-induced fractures. This propagation of fractures resulted in hydraulic short-circuiting between the dye-injection zone in the core hole and two lower piezometer zones, and a partial disruption of the hydraulic connection between the injection core hole and downgradient piezometers on the ridge crest and valley wall. In addition, injected dye was detected in piezometers monitoring a flooded part of the abandoned underground mine. Dye was apparently transported into the mine through a hydraulic connection between the injection core hole and subsidence-related fractures.

Kentucky↗
USGS1995

Hydrogeology and geochemistry of acid mine drainage in ground water in the vicinity of Penn Mine and Camanche Reservoir, Calaveras County, California: First-year summary

Acid drainage from the Penn Mine in Calaveras County, California, has caused contamination of ground water between Mine Run Dam and Camanche Reservoir. The Penn Mine was first developed in the 1860's primarily for copper and later produced lesser amounts of zinc, lead, silver, and gold from steeply dipping massive sulfide lenses in metamorphic rocks. Surface disposal of sulfidic waste rock and tailings from mine operations has produced acidic drainage with pH values between 2.3 and 2.7 and elevated concentrations of sulfate and metals, including copper, zinc, cadmium, iron, and aluminum. During the mine's operation and after its subsequent abandonment in the late 1950's, acid mine drainage flowed down Mine Run into the Mokelumne River. Construction of Camanche Dam in 1963 flooded part of the Mokelumne River adjacent to Penn Mine. Surface-water diversions and unlined impoundments were constructed at Penn Mine in 1979 to reduce runoff from the mine, collect contaminated surface water, and enhance evaporation. Some of the contaminated surface water infiltrates the ground water and flows toward Camanche Reservoir. Ground- water flow in the study area is controlled by the local hydraulic gradient and the hydraulic characteristics of two principal rock types, a Jurassic metavolcanic unit and the underlying Salt Spring slate. The hydraulic gradient is west from Mine Run impoundment toward Camanche Reservoir. The median hydraulic conductivity was about 10 to 50 times higher in the metavolcanic rock (0.1 foot per day) than in the slate (0.002 to 0.01 foot per day); most flow occurs in the metavolcanic rock where hydraulic conductivity is as high as 50 feet per day in two locations. The contact between the two rock units is a fault plane that strikes N20?W, dips 20?NE, and is a likely conduit for ground-water flow, based on down-hole measurements with a heatpulse flowmeter. Analyses of water samples collected during April 1992 provide a comprehensive characterization of ground water below Mine Run Dam at the Penn Mine. Specific conductance of the samples ranged from 1,810 to 18,000 microsiemens per centimeter. pH values of sampled ground water ranged from 3.7 to 7.8. Dissolved constituents in ground water ranged from less than 0.010 to 86 milligrams per liter for copper, from less than 0.010 to 240 milligrams per liter for iron, from less than 0.01 to 250 milligrams per liter for aluminum, and from 0.020 to 600 milligrams per liter for zinc. A contaminated ground-water plume appears to originate in the metavolcanic unit along the north abutment of Mine Run Dam. The plume is characterized by low pH, high concentrations of sulfate and dissolved metals, and enrichment of the heavy stable isotopes of hydrogen and oxygen. Dissolved iron and sulfate correlate positively, suggesting pyrite as the probable source of these elements. The concentrations of some dissolved constituents apparently are controlled by equilibrium with solid mineral phases. Poorly crystalline hydrous ferric oxide and microcrystalline gibbsite are close to saturation in ground water with pH values between 4 and 7.8 and probably control the solubility of Fe 3+ and Al 3+ , respectively. Using a range of bulk hydraulic conductivity values for the metavolcanic unit from the median value (0.1 foot per day) to the highest values (50 feet per day), together with a representative cross-sectional area (3,000 square feet) for the contaminated ground-water plume and a hydraulic gradient of 0.14 from August 1992, the following range in ground-water flow rates is estimated by Darcy's law: 42 to 21,000 cubic feet per day, or 10 5 to 5x10 7 gallons per year. Multiplying this estimated range in ground-water flow by representative metal concentrations from the contaminated plume gives the following estimates for annual metal transport to Camanche Reservoir by ground water: 86 to 42,000 pounds of copper; 310 to 150,000 pounds of zinc; and 1.5 to 750 pounds of cadmium.

California↗
USGS1999

Summary of hydrogeologic and ground-water-quality data and hydrogeologic framework at selected well sites, Adams County, Pennsylvania

Rapid population growth in Adams County has increased the demand for ground water and led Adams County planning officials to undertake an effort to evaluate the capabilities of existing community water systems to meet future, projected growth and to begin wellhead-protection programs for public-supply wells. As part of this effort, this report summarizes ground-water data on a countywide scale and provides hydrogeologic information needed to delineate wellheadprotection areas in three hydrogeologic units (Gettysburg Lowland, Blue Ridge, and Piedmont Lowland). Reported yields, specific capacities, well depths, and reported overburden thickness can vary by hydrogeologic unit, geologic formation, water use (domestic and nondomestic), and topographic setting. The reported yields of domestic wells drilled in the Gettysburg Lowland (median reported yield of 10 gallons per minute) are significantly greater than the reported yields from the Blue Ridge, Piedmont Lowland, and Piedmont Upland (median reported yields of 7.0, 8.0, and 7.0 gallons per minute, respectively). Reported yields of domestic wells completed in the diabase and the New Oxford Formation of the Gettysburg Lowland, and in the metarhyolite and metabasalt of the Blue Ridge, are significantly lower than reported yields of wells completed in the Gettysburg Formation. For nondomestic wells, reported yields from the Conestoga Formation of the Piedmont Lowland are significantly greater than in the diabase. Reported yields of nondomestic wells drilled in the Gettysburg, New Oxford, and Conestoga Formations, and the metarhyolite are significantly greater than those for domestic wells drilled in the respective geologic formations. Specific capacities of nondomestic wells in the Conestoga and Gettysburg Formations are significantly greater than their domestic counterparts. Specific capacities of nondomestic wells in the Conestoga Formation are significantly greater than the specific capacities of nondomestic wells in the metarhyolite, diabase, and Gettysburg and New Oxford Formations.Well depths do not vary considerably by hydrogeologic unit; instead, the greatest variability is by water use. Nondomestic wells drilled in the metarhyolite, Kinzers, Conestoga, Gettysburg, and New Oxford Formations are completed at significantly greater depths than their domestic counterparts. The reported thickness of overburden varies significantly by geologic formation and water use, but not by topographic setting. The median overburden thickness of the Blue Ridge (35 feet) is greater than in any other hydrologic unit. Except where adversely affected by human activities, ground water in Adams County is suitable for most purposes. Calcium and magnesium are the dominant cations, and bicarbonate is the dominant anion. In general, the pH and hardness of ground water is lower in areas that are underlain by crystalline rocks (Blue Ridge and Piedmont Upland) than in areas underlain by sedimentary rocks, especially where limestone or dolomite is dominant (Piedmont Lowland). Dissolved nitrate (as N) and dissolved nitrite (as N) concentrations in the water from 9 of 69 wells and 3 of 80 wells sampled exceeded the U.S. Environmental Protection Agency (USEPA) maximum contaminant levels (MCL) of 10 and 1.0 mg/L (milligrams per liter), respectively. Sulfate concentrations greater than the proposed USEPA MCL of 500 mg/L were reported from the water in 3 of 110 wells sampled. Iron concentrations in the water from 13 of 67 wells sampled and manganese in the water from 9 of 64 wells sampled exceeded the USEPA secondary maximum contaminant level (SMCL) of 300 and 50 mg/L (micrograms per liter), respectively. Aluminum concentrations in the water from 16 of 22 wells sampled exceeded the lower USEPA SMCL threshold of 50 µg/L. Pesticides were detected in the water from seven wells but at concentrations that did not exceed USEPA MCL's. Most volatile organic compounds detected in the ground water were confined to USEPA Superfund sites or the immediate area around the sites. The hydrogeologic framework in the vicinity of four public-supply well fields (Gettysburg, Abbottstown, Fairfield, and Littlestown) consists of two zones—an upper zone and a lower zone. In general, the upper zone is thin (5 to 60 feet or more) and dominated by saturated regolith and deeply weathered bedrock. The upper zone is bounded at the top by the water table and below by bedrock in which secondary porosity and permeability are considerably lower. Ground water is generally unconfined, and recharge rates are rapid. Ground-water flow is influenced more strongly by the topography of the ground surface and bedrock surface than by geologic structure. The lower zone is relatively thick (400 to 1,000 feet) and consists of slightly weathered to highly competent bedrock. Ground-water flow paths in the lower zone are generally greater and recharge rates are longer than in the upper zone; confined conditions are common, especially at depth.

Water-Resources Investigations Report↗
USGS2020

Fate and behavior tools related to inland spill response—Workshop on the U.S. Geological Survey’s role in Federal science support

Executive Summary There is a growing body of tools available for science support for determining the fate and behavior of industrial and agricultural chemicals that are rapidly injected (“spilled”) into aquatic environments. A 2-day roundtable-style workshop was held by the U.S. Geological Survey (USGS) in Middleton, Wisconsin, in December 2017 to describe and explore existing Federal science support for spill fate and behavior tools used for inland spills, ongoing and new fate and behavior studies, and science gaps in planning and response tools as part of the USGS Midcontinent Region’s efforts to include spill response as part of its strategic plans. A total of 28 attendees representing a variety of Federal, State, and regional entities presented on programs and tools used in various aspects of spill response. Most programs and tools discussed were for spills in riverine environments but tools and applications for spills in lakes, on land surfaces, in urban storm sewer networks, and groundwater also were discussed. A primary workshop focus was to facilitate communication and increase potential for future collaboration among agencies for inland spill science support. The role and need for more USGS science support within the inland spill community was discussed. Enhanced communication is needed within the USGS and the U.S. Department of the Interior science programs, as well as within and among other agencies that do emergency planning and response. A main conclusion of the workshop was that there are untapped resources of the USGS outlined in the agency’s science strategy that could strengthen science support for fate and behavior tools in inland areas, especially in the Upper Mississippi River, Ohio River, and Great Lakes Basins where large freshwater resources overlap with dense corridors of oil and hazardous substances, with transportation networks, and with large populations centers. Fate and behavior tools are being developed quickly for inland spill response by multiple Federal agencies in partnership with local and regional entities. Applicability of these tools ranges from planning and preparedness, to the early stages of spill response for protection of human life and property, and to the application of monitoring and models to assess the long-term consequences of spills. Key findings from the workshop, with an emphasis on potential further development of USGS science support, include the following: •The national and regional response to spills occurs within an established system that must be respected by all parties involved in spill response. The USGS’s role is to support spill responders who are physically working at a spill scene, deploying booms and using other efforts to contain and recover spilled materials. •The USGS has tools that have been used throughout spill response operations, from early response to recovery and restoration. Developing a more formal role for the USGS to participate in science support for inland spills on a consistent basis is a desired outcome. This will require the USGS to improve internal and external communication and would be best accomplished by assigning one or more coordinator positions within the agency to plan and oversee USGS spill-response efforts. More involvement of the USGS on National and Regional Response Teams, especially in the realm of the Science and Technology Subcommittees, will gofar in increasing external communication and integration of fate and behavior tools. •Rapid response to spills requires modeling and mapping of plumes and associated time-of-travel estimation for a range of stream sizes across the United States. Many existing models use USGS streamgage data and the USGS National Hydrography Dataset. Nearly all existing models would benefit from updated linkages to USGS StreamStats and its soon-to-be released time-of-travel estimates,real-time velocity, stream morphology, and slope data. Integrating USGS tools with those from other agencies could be done to better serve the larger spill response community. • A problem is that existing models to rapidly predict plume extent, as well as more followup/longer-term fate and transport models, can be unknown or unavailable to spill responders. Thus, creating and strengthening linkages among USGS scientists skilled at using these tools is needed to support spill response with the on-scene responders. • Research for inland spill fate and behavior done outside of an immediate spill response can assist with spill planning and preparedness by (1) revealing sites likely to experience spills in the future (high-risk sites) and (2) understanding how a spilled substance might behave under a range of environmental conditions. However, USGS research on this topic has been scarce and subject to funding availability. Examples include the 2010 Line 6B Spill release into the Kalamazoo River in Michigan, where the USGS provided science support for a variety of fate and behavior tools for stream and impoundment environments. A long-term research site in Bemidji, Minnesota, provides important insights into transformations and longevity of spilled oil in groundwater and groundwater-surface water interactions. • Linking stream models to other components of this inland environment, including groundwater, overland flow, and karst, is needed. Stream network data can be linked to underground conduits such as storm sewers and karst groundwater systems. Stream models can also be linked with geospatial data such as that contained in U.S. Environmental Protection Agency’s interactive mapping tools. • The USGS is uniquely qualified to collect water-quality data during spills in the United States because of its many geographically dispersed water science centers, its knowledge and preparedness for flood measurement and documentation, and its cadre of skilled water-quality employees. Rapid-deployment gages, used for floods, could also be used for spills if they included spill-specific sensors. Coordinated expertise at USGS water and environmental science centers can be used for monitoring spill effects and for assessing risk to water quality and ecological communities. • Scientists at the USGS have proven capable of providing science coordination and technical assistance within the Incident Command Structure at the request of the lead on-scene coordinator. This external coordination, as well as internal communication within USGS Water, Hazards, and Ecosystems Mission Areas, could be improved by establishing and naming a USGS spills coordinator. Scott Morlock, Jo Ellen Hinck, and Faith Fitzpatrick are currently (2017) serving in informal coordination roles in addition to their traditional duties.

Open-File Report↗
USGS2002

Geohydrology of Southeastern Pennsylvania

Rapid population growth in southeastern Pennsylvania has increased the demand for ground water. In an effort to address the increased ground-water needs, a ground-water investigation in a 5,200-square-mile area of southeastern Pennsylvania was initiated. Information on the geohydrologic system of the area and the water-bearing capabilities of 51 geohydrologic units in six physiographic provinces or sections (Coastal Plain, Piedmont Upland, Piedmont Lowland, Gettysburg-Newark Lowland, South Mountain, and Reading Prong) has been summarized. Also included are statistical summaries by geohydrologic unit for well construction and discharge data (according to water use), as well as inorganic and radiochemical ground-water-quality data. Characteristics of the ground-water-flow system in the study area, as well as aquifer hydrologic properties, are related to geology, but can be modified by human development. Ground-water flow in the Coastal Plain Physiographic Province, is through intergranular or primary openings under either unconfined or confined aquifer conditions. Historically, ground-water flowed toward the Delaware and Schuylkill Rivers, but the original flow paths and water quality have been altered significantly by urbanization. In igneous and metamorphic rocks (Piedmont Upland, South Mountain, and Reading Prong), ground-water flows through a network of interconnected secondary openings (fractures, joints, cleavage planes). Ground water in the carbonate rocks (Piedmont Lowland) also flows through a network of secondary openings, but these openings have been enlarged by solution. In the Triassic sedimentary rocks (Gettysburg-Newark Lowland), thin tabular aquifers are separated by much thicker, strata-bound aquitards. The fractured Triassic bedrock forms a very complex, anisotropic, and heterogeneous aquifer with horizontal permeability much greater than vertical permeability. In general, ground-water flow in southeastern Pennsylvania takes place within local flow systems that discharge within days or weeks to adjacent stream valleys or surface-water bodies. Intermediate (South Mountain) and regional (Gettysburg-Newark Lowland) scale systems, however, in which residence times have been measured in months or years discharge to major streams or rivers that are located in different physiographic provinces or sections or tens of miles distant. Well depths, casing lengths, reported yields, and specific capacities can vary significantly by geohydrologic unit, use of well, and topographic setting. Wells drilled in the Weverton and Loudon Formations, undivided, and the Montalto Quartzite Member (South Mountain) have median well and casing lengths of 374 and 130 feet, respectively, significantly greater than in almost every other geohydrologic unit in the study area. Wells drilled in the Peach Bottom Slate and Cardiff Conglomerate, undivided (Piedmont Upland) are typically shallow, with a median well depth of 90 feet. Wells in the Marburg Schist (Piedmont Upland) have the lowest median casing length—5.5 feet. Wells in the Stonehenge Formation (Piedmont Lowland), the most productive unit in the study area, have a median reported yield of 200 gallons per minute and a median specific capacity of 27 gallons per minute per foot. The Cocalico Formation (Piedmont Lowland) is the least productive unit with a median reported well yield of 2.5 gallons per minute and a median specific capacity of 0.01 gallons per minute per foot. In general, high-demand wells are significantly deeper, use significantly more casing, and have significantly greater yields than domestic wells drilled in the same unit. Commonly, wells drilled in valleys will have greater reported yields and specific capacities than wells drilled in the same unit on slopes or hilltops. Except where adversely affected by human activities, the quality of ground water in southeastern Pennsylvania is suitable for most purposes. Yet several water-quality criteria are exceeded in many wells throughout the area. Water from 51 percent of 2,075 wells sampled had a pH higher or lower than the range specified in the U.S. Environmental Protection Agency (USEPA) secondary maximum contaminant level (SMCL). Of water samples analyzed, about 1 percent of 1,623 wells contained concentrations of chloride and 27 percent of 1,624 wells sampled contained concentrations of iron that exceeded the USEPA SMCL. Twenty-seven percent of 1,397 wells sampled contained water with manganese concentrations greater than the USEPA SMCL. Sulfate concentrations in the water of 3 percent of 1,699 wells sampled and total dissolved solids in the water from 10 percent of 1,590 wells sampled exceeded the USEPA SMCL. Concentrations of cadmium, chromium, cyanide, mercury, nickel, radium-226, selenium, and zinc in the water exceeded the USEPA maximum contaminant level (MCL) in less than 5 percent of the 183 to 620 wells sampled. Nine percent of 625 wells sampled contained water with lead concentrations that exceeded the USEPA MCL. Radon concentrations in the water of 92 percent of the 285 wells sampled exceeded the proposed USEPA MCL. Radium-228 in the water of 10 percent of the 240 wells sampled and nitrate in the water of 13 percent of 1,413 wells sampled exceeded the USEPA MCL. Gross-alpha activity in the water was measured only in the Chickies and Harpers Formations of the Piedmont Upland, with 23 percent of the 168 wells sampled exceeding the USEPA MCL.

Water-Resources Investigations Report↗