Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Studies in Maine Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

Transport of suspended and bedload sediment at eight stations in the Coeur d'Alene River basin, Idaho

The Remedial Investigation/Feasibility Study conducted by the U.S. Environmental Protection Agency within the Spokane River Basin of northern Idaho and eastern Washington included extensive data-collection activities to determine the nature and extent of trace-element contamination within the basin. As part of the investigation, the U.S. Geological Survey designed and implemented a sampling program to assess sediment transport in the Coeur d’Alene River Basin. Suspended and bedload sediments were sampled at four stations at or near base flow and at eight stations during low, moderate, and high discharge conditions between February 1999 and April 2000. The concentrations and loads of suspended and bedload sediment at all stations were directly related to stream discharge. To quantify these relationships, a power function was used to develop sediment-transport curves at all stations. Although the transport curves for most of the stations indicate a good log-log relationship between stream discharge and suspended- and bedload-sediment discharge, there was a fair amount of scatter about the best-fit regression at most stations. For suspended-sediment discharge, the scatter can be primarily attributed to a hysteresis effect in the concentration of suspended sediment as stream discharge rises and falls. The effects of hysteresis on bedload-sediment discharge were difficult to assess because of a paucity of samples collected over the stream hydrograph. At most of the stations, and at the stream discharges sampled, the transport characteristics for fine- and sand-sized suspended sediment were similar. However, at the two main-stem Coeur d’Alene River stations, Rose Lake and Harrison, the suspended-sediment load was primarily composed of fine-grained sediment at stream discharges of less than 15,000 cubic feet per second. These two stations are characterized by relatively slow water velocities, which appear to be insufficient to transport sand-sized sediment at lower stream discharge. At most of the stations, and at the stream discharges sampled, the bedload was primarily composed of material greater than 2 millimeters in diameter, the break between sand and gravel. A predominance of sand-sized bedload was noted at only a few stations, and generally only during low stream discharge. The particle-size distribution of bedload sediment at most stations became proportionately coarser as stream discharge increased. During the peak of snowmelt runoff for water years 1999 and 2000, gravel-sized material between 2 and 64 millimeters in diameter comprised more than 70 percent of the bedload transport at most stations. However, at the station on the Coeur d’Alene River at Rose Lake, the bedload was predominantly composed of fine-grained material of less than 1 millimeter in diameter for all measured stream discharges. The slow water velocities at Rose Lake accounted for the predominance of fine-grained sediment transport.

Idaho↗

Glacial geology and hydrogeology of valley-fill aquifers in the Oneonta area, Otsego and Delaware Counties, New York

The glacial geology and hydrogeology of valley-fill aquifers and their surrounding uplands are described within a 112-square-mile area in southern Otsego and northwestern Delaware Counties, New York, centered around the City of Oneonta. The major valleys include those of the Susquehanna River, Otego Creek, Charlotte Creek, and Schenevus Creek. A variety of data were analyzed to provide a broad picture of the glacial deposits, hydrogeologic framework, aquifer occurrence, and water-resource potential in the area. Both valley-fill and bedrock aquifers are used for water supply within the study area. The valley-fill aquifers consist of coarse-grained stratified drift, are mostly limited to the larger valleys, and have well yields that typically are much greater than those obtained from the bedrock aquifers. The bedrock aquifers generally have lower well yields, are the sole source of groundwater in upland areas, and are tapped in valley areas where sediments are very silty or are absent. Through and non-through valleys and their orientations relative to ice flow have resulted in a variety of deglacial environments and deposits, some of which depart from glacial stratigraphy typically observed elsewhere in central New York. In comparison to through valleys with low in-valley divides, the regional thinning of ice over the high bedrock divides of the non-through valleys resulted in the earlier and more widespread stagnation of glacial ice, development of dead-ice sinks, and earlier diversion of meltwater from ice north of the divides. As the main through valley in the study area, the Susquehanna River valley is characterized by multiple inferred ice-margin positions with associated outwash deposition or ice-contact deposits. Throughout the study area, valleys orientated parallel or subparallel to the ice flow facilitated the development of long ice tongues; valleys oriented perpendicular to the ice flow led to little ice-tongue development, but they did facilitate the deposition of the extensive kame moraines that now occupy several-mile-long valley reaches. Lacustrine sediments were deposited in proglacial lakes. These sediments underlie most valleys that were oriented parallel and subparallel to ice flow, but they are largely absent in the Charlotte Creek valley, which was oriented perpendicular to the ice flow and now contains an extensive kame moraine. Beneath these lacustrine deposits, sand and gravel were deposited as subaqueous fans, eskers, and the distal parts of delta (kame) terraces, each with variable silt content. The presence of coarse-grained stratified deposits, their saturated thicknesses, and their recharge potential are the primary controls on aquifer locations in the study area. The most widespread aquifers in the study area consist of sand and gravel and are confined mostly beneath lacustrine deposits. Confined aquifer yields are enhanced by hydraulic connections with unconfined ice-contact deposits along the valley walls, especially where tributary streams cross these deposits and provide additional recharge through streambed infiltration. The Susquehanna River and other large valley creeks provide a potentially large source of recharge to aquifers where groundwater withdrawals from nearby production wells induce infiltration of river water into aquifers. Unconfined aquifers are present where ice-contact deposits extend below the valley floor and are sufficiently saturated. Most surficial outwash deposits in the study area are thinly saturated; thus their water-resource potential is likely to be limited. The upland areas contain very little stratified drift; therefore, characterization was limited to delineating areas of thick till and thin, or absent, till. Recharge of bedrock aquifers is greatest in areas overlain by thin till or where bedrock is exposed at land surface.

New York↗

Characterizing infiltration through a mine-waste dump using electrical geophysical and tracer-injection methods, Clear Creek County, Colorado

Infiltration of surface water through mine waste can be an important or even dominant source of contaminants in a watershed. The Waldorf mine site in Clear Creek County, Colorado, is typical of tens of thousands of small mines and prospects on public lands throughout the United States. In this study, electromagnetic (EM) conductivity and direct current (dc) resistivity surveys were conducted in tandem with a NaCl tracer study to delineate ground-water flow paths through a mine-waste dump and adjacent wetland area. The tracer was used to tag adit water infiltrating from braided channels flowing over the top of the dump to seeps at the base of the dump. Infiltration from the braided channels had a maximum flow rate of 92 m/day and a hydraulic conductivity of 1.6 × 10 4 cm 3 /s. After rerouting of adit flow around the waste dump, discharge at some of the largest seeps was reduced, although not all seepage was eliminated entirely. Integrating results of the tracer study with those of the EM and dc geophysical surveys revealed two main flow paths of ground water, one beneath the dump and one through the dump. The main source of water to the first flow path is deeper ground water emerging from the fault zone beneath the collapsed adit. This flow path travels beneath the waste dump and appears to have been unaffected by rerouting of the adit discharge around the waste dump. The source of the second flow path is infiltration of adit water from braided channels flowing over the top of the dump, which is intermediate in depth and flows through the center of the waste dump. Following rerouting of adit flow, discharge to seeps at the toe of the dump along this flow path was reduced by as much as two-thirds, although not eliminated entirely. Improved understanding of ground-water flow paths through this abandoned mine site is important in developing effective remediation strategies to target sources of metals emanating from the adit, waste dump, and contaminated wetland area. Any use of trade, firm, or product names is for descriptive purposes only and does not imply endorsement by the U.S. government.

Colorado↗

Seismicity map of the State of Montana

This map is one of a series of seismicity maps produced by the U. S. Geological Survey that show earthquake data of individual states or groups of states at the scale of 1:1,000,000. This map shows only those earthquakes with epicenters located within the boundaries of Montana, even though earthquakes in bordering states or countries may have been felt or may have caused damage in Montana. The data in table 1 were used to compile the seismicity map; these data are a corrected, expanded, and updated (through 1981) version of the data used by Algermissen (1969) for a study of seismic risk in the United States. The locations and intensities of some earthquakes were revised and intensities were assigned where none had been before. Many earthquakes were added to the original list from new data sources as well as from some old data sources that had not been previously used. No earthquakes with magnitudes greater than 2.5 were located in Montana during 1981. The data in table 1 represent best estimates of the location of the epicenter, magnitude, and intensity of each earthquake on the basis of historical and current information. Some of the aftershocks from large earthquakes are listed, but not all, especially for earthquakes that occurred before seismic instruments were universally used. Special criteria used in compiling the list of earthquake in the State of Montana include the following: (1) All earthquakes with epicenters along the Montana-Wyoming border with a latitude of 45° N are listed in Montana. (2) Aftershocks of the 1925 and 1935 earthquakes were assigned the same geographic locations as the main shocks. (3) Instrumental epicenters for the 1959 Hebgen Lake earthquake and its aftershocks were 1ocated in Idaho, Montana, and Wyoming; only the ones located in Montana are included on this map. All non-instrumental locations were given the location of the main shock with an accuracy code that includes the community reporting the maximum intensity. The latitude and longitude coordinates of each epicenter were rounded to the nearest tenth of a degree and sorted so that all identical locations were grouped and counted. These locations are represented on the map by a triangle. The number of earthquakes at each location is shown on the map by the number to the right of the triangle. A Roman numeral to the left of a triangle is the maximum Modified Mercalli intensity (Wood and Neumann, 1931) of all earthquakes at that geographic location. The absence of an intensity value indicates that no intensities have been assigned to earthquakes at that location. The year shown below each triangle is the latest year for which the maximum intensity was recorded.

Montana↗

Characterization of streamflow, suspended sediment, and nutrients entering Galveston Bay from the Trinity River, Texas, May 2014–December 2015

The U.S. Geological Survey (USGS), in cooperation with the Texas Water Development Board and the Galveston Bay Estuary Program, collected streamflow and water-quality data at USGS streamflow-gaging stations in the lower Trinity River watershed from May 2014 to December 2015 to characterize and improve the current understanding of the quantity and quality of freshwater inflow entering Galveston Bay from the Trinity River. Continuous streamflow records at four USGS streamflow-gaging stations were compared to quantify differences in streamflow magnitude between upstream and downstream reaches of the lower Trinity River. Water-quality conditions were characterized from discrete nutrient and sedi­ment samples collected over a range of hydrologic conditions at USGS streamflow-gaging station 08067252 Trinity River at Wallisville, Tex. (hereinafter referred to as the “Wallisville site”), approximately 4 river miles upstream from where the Trinity River enters Galveston Bay. Based on streamflow records, annual mean outflow from Livingston Dam into the lower Trinity River was 2,240 cubic feet per second (ft 3 /s) in 2014 and 22,400 ft 3 /s in 2015, the second lowest and the highest, respectively, during the entire period of record (1966–2015). During this study, only about 54 percent of the total volume measured at upstream sites was accounted for at the Wallisville site as the Trinity River enters Galveston Bay. This difference in water volumes between upstream sites and the Wallisville site indicates that at high flows a large part of the volume released from Lake Livingston does not reach Galveston Bay through the main channel of the Trinity River. These findings indicate that water likely flows into wetlands and water bodies surrounding the main channel of the Trinity River before reaching the Wallisville site and is being stored or discharged through other channels that flow directly into Galveston Bay. To characterize suspended-sediment concentrations and loads in Trinity River inflow to Galveston Bay, a regression model was developed to estimate suspended-sediment concentrations by using acoustic backscatter data as a surrogate. The model yielded an adjusted coefficient of determination value of 0.92 and a root mean square error of 1.65 milligrams per liter (mg/L). The mean absolute percentage error between measured and estimated suspended-sediment concentration was 35 percent. During this study, estimated suspended-sediment concentrations ranged from 2 to 701 mg/L, with a mean of 97 mg/L. Suspended-sediment concentrations varied in response to changes in discharge, with peak suspended-sediment concentrations occurring 1 to 2 days before the peak discharge for each event. The total suspended-sediment load at the Wallisville site during May 2014–December 2015 was approximately 2,200,000 tons, with a minimum monthly suspended-sediment load of 100 tons in October 2014 and a maximum monthly load of 441,000 tons in November 2015. Results from nutrient samples collected at the Wallisville site indicate that total nitrogen and total phosphorus concen­trations fluctuated at a similar rate, with the highest nutrient concentrations occurring during periods of high flow corresponding to releases from Lake Livingston. The mean concen­trations of total nitrogen and total phosphorus were approxi­mately 75 percent higher during high flow releases than during periods of low flow, overshadowing variations in nutrient concentrations caused by seasonality at the Wallisville site. Results from the study indicate nutrient delivery to Galveston Bay from the main channel of the Trinity River is likely controlled primarily by high-flow releases from Lake Livingston. For most samples collected at the Wallisville site, organic nitrogen was the predominant form of nitrogen; however, when discharge increased because of releases from Lake Livingston, the percentage of organic nitrogen typically decreased and the percentage of nitrate increased. The concentrations of total phosphorus also increased during high-flow events, likely as a result of suspended sediment within Lake Livingston releases and mobilization of sediment particles in the river channel and flood plain during these periods of high flow. The predominant source of phosphorous to Galveston Bay from the Trinity River is in particulate form closely tied to suspended-sediment concentrations. The changes in nutrient concentration and composition caused by releases from Lake Livingston during this study indicate the reservoir may play an important role in the delivery of nutrients into Galveston Bay. Further study is required to better understand the processes in Lake Livingston influencing the characteristics of nutrient and sediment inflow to Galveston Bay. With phosphorous concentrations correlated to suspended-sediment concentra­tions (coefficient of determination value of 0.75) and with the concentrations of nutrients changing as the discharge changes, the diversion of water and suspended sediment into surround­ing wetlands and channels outside of the main channel of the Trinity River may play a large role in regulating nutrient inputs into Galveston Bay.

Texas↗

Water resources of Sweetwater County, Wyoming

Sweetwater County is located in the southwestern part of Wyoming and is the largest county in the State. A study to quantify the availability and describe the chemical quality of surface-water and ground-water resources in Sweetwater County was conducted by the U.S. Geological Survey in cooperation with the Wyoming State Engineer’s Office. Most of the county has an arid climate. For this reason a large amount of the flow in perennial streams within the county is derived from outside the county. Likewise, much of the ground-water recharge to aquifers within the county is from flows into the county, and occurs slowly. Surface-water data were not collected as part of the study. Evaluations of streamflow and stream-water quality were limited to analyses of historical data and descriptions of previous investigations. Forty-six new ground-water-quality samples were collected as part of the study and the results from an additional 782 historical ground-water-quality samples were reviewed. Available hydrogeologic characteristics for various aquifers throughout the county also are described. Flow characteristics of streams in Sweetwater County vary substantially depending on regional and local basin characteristics and anthropogenic factors. Because precipitation amounts in the county are small, most streams in the county are ephemeral, flowing only as a result of regional or local rainfall or snowmelt runoff. Flows in perennial streams in the county generally are a result of snowmelt runoff in the mountainous headwater areas to the north, west, and south of the county. Flow characteristics of most perennial streams are altered substantially by diversions and regulation. Water-quality characteristics of selected streams in and near Sweetwater County during water years 1974 through 1983 were variable. Concentrations of dissolved constituents, suspended sediment, and bacteria generally were smallest at sites on the Green River because of resistant geologic units, increased vegetative cover, large diluting streamflows, and large reservoirs. Concentrations of dissolved constituents, suspended sediment, and bacteria generally were largest at sites in the Big Sandy River and Bitter Creek Basins. Some nutrient concentrations and bacteria counts exceeded various State and Federal water-quality criteria. Historical and recent anthropogenic activities contributed to natural sources of many dissolved constituents and suspended sediment. Both water-table and artesian conditions occur in aquifers within the county. Shallow ground water is available throughout the county, although much of it is only marginally suitable or is unsuitable for domestic and irrigation uses mainly because of high total dissolved solids (TDS) concentrations. Suitable ground water for livestock use can be found in most areas of the county. Ground-water quality tends to deteriorate with increasing distance from recharge areas and with increasing depth below land surface. Ground water from depths of greater than a few thousand feet tends to have TDS concentrations that make it moderately saline to briny. In some areas even shallow ground water has moderately saline TDS concentrations. Specific constituents in parts of some aquifers in the county occur in relatively high concentrations when compared to U.S. Environmental Protection Agency drinking-water standards. Relatively high concentrations of sulfate, fluoride, boron, iron, and manganese were found in several aquifers. Many ground-water samples from the Battle Spring aquifer in the Great Divide Structural Basin had high radionuclide concentrations. The estimated mean daily water use in Sweetwater County in 2000 was 170.73 million gallons per day. Irrigation was the largest single use of water in the county with an estimated mean use of more than 92 million gallons per day. Surface water irrigation accounted for nearly 90 percent of the total irrigation water used in 2000. Although ground water is used to a much lesser extent than surface water, in many areas of the county it is the only source of water available.

Wyoming↗

ShakeAlert® version 3: Expected performance in large earthquakes

The ShakeAlert earthquake early warning (EEW) system partners along with U.S. Geological Survey (USGS) licensed operators deliver EEW alerts to the public and trigger automated systems when a significant earthquake is expected to impact California, Oregon, or Washington. ShakeAlert’s primary goal is to provide usable warning times before the arrival of damaging shaking. EEW is most likely to achieve this goal in large‐magnitude earthquakes. In recent years, ShakeAlert has gone through a series of upgrades to its underlying scientific algorithms aimed at improved performance during large earthquakes. Version 3 of this software recently went live in the production system and includes improvements to all algorithms. The main seismic algorithms that detect an earthquake and characterize its location, magnitude, and fault rupture orientation are faster than older versions. Other key changes include: using real‐time geodetic data to characterize the magnitude growth in large earthquakes; the introduction of an alert pause procedure to compromise between speed near the epicenter and improved accuracy at larger distances; and the inclusion of a nonergodic site‐response model in the ground‐motion predictions. ShakeAlert has achieved its primary goal of usable warning times before strong shaking at some locations in real‐time operations in recent M 6 earthquakes. Using offline tests, we demonstrate usable warning times are possible for many sites with peak shaking values of modified Mercalli intensity (MMI) 7–8 in M 7+ earthquakes and also for many MMI 8–9 sites in M 8+ earthquakes. ShakeAlert partners use a variety of MMI and magnitude thresholds in deciding when to alert their users within bounds set by the USGS. Our study shows that there is room to raise the magnitude thresholds up to about M 5.5 without adversely affecting performance in large earthquakes. The ground‐motion criteria are more complex owing to a significant drop‐off in warning times between the MMI 4 and 5 levels of predicted shaking. However, widely used ShakeAlert products, such as the MMI 3 and 4 contour products, can provide sufficiently long warning times before strong shaking in moderate‐to‐great earthquakes to enable a range of protective actions.

Bulletin of the Seismological Society of America↗

Coastal-change and glaciological map of the Ross Island area, Antarctica

Reduction in the area and volume of Earth?s two polar ice sheets is intricately linked to changes in global climate and to the resulting rise in sea level. Measurement of changes in area and mass balance of the Antarctic ice sheet was given a very high priority in recommendations by the Polar Research Board of the National Research Council. On the basis of these recommendations, the U.S. Geological Survey used its archive of satellite images to document changes in the cryospheric coastline of Antarctica and analyze the glaciological features of the coastal regions. The Ross Island area map is bounded by long 141? E. and 175? E. and by lat 76? S. and 81? S. The map covers the part of southern Victoria Land that includes the northwestern Ross Ice Shelf, the McMurdo Ice Shelf, part of the polar plateau and Transantarctic Mountains, the McMurdo Dry Valleys, northernmost Shackleton Coast, Hillary Coast, the southern part of Scott Coast, and Ross Island. Little noticeable change has occurred in the ice fronts on the map, so the focus is on glaciological features. In the western part of the map area, the polar plateau of East Antarctica, once thought to be a featureless region, has subtle wavelike surface forms (megadunes) and flow traces of glaciers that originate far inland and extend to the coast or into the Ross Ice Shelf. There are numerous outlet glaciers. Glaciers drain into the McMurdo Dry Valleys, through the Transantarctic Mountains into the Ross Sea, or into the Ross Ice Shelf. Byrd Glacier is the largest. West of the Transantarctic Mountains are areas of blue ice, readily identifiable on Landsat images, that have been determined to be prime areas for finding meteorites. Three subglacial lakes have been identified in the map area. Because McMurdo Station, the main U.S. scientific research station in Antarctica, is located on Ross Island in the map area, many of these and other features in the area have been studied extensively. The paper version of this map is available for purchase from the USGS Store.

IMAP↗

Simulation of flow and habitat conditions under ice, Cache la Poudre River - January 2006

The U.S. Forest Service authorizes the occupancy and use of Forest Service lands by various projects, including water storage facilities, under the Federal Land Policy and Management Act. Federal Land Policy and Management Act permits can be renewed at the end of their term. The U.S. Forest Service analyzes the environmental effects for the initial issuance or renewal of a permit and the terms and conditions (for example, mitigations plans) contained in the permit for the facilities. The U.S. Forest Service is preparing an environmental impact statement (EIS) to determine the conditions for the occupancy and use for Long Draw Reservoir on National Forest System administered lands. The scope of the EIS includes evaluating current operations and effects to fish habitat of an ongoing winter release of 0.283 m3 /s (10 ft3 /s) from headwater reservoirs as part of a previously issued permit. The field conditions observed during this study included this release. The U.S. Forest Service entered into an interagency agreement (05-IA-11021000-030) with the U.S. Geological Survey (USGS) Fort Collins Science Center to perform analysis of fish habitat and flow relationships in the Cache la Poudre River during winter ice-over conditions using a twodimensional hydrodynamic model. The U.S. Forest Service selected the Fort Collins Science Center for this task because of their expertise in developing two-dimensional hydraulic models for habitat modeling applications. This report transmits model results to the U.S. Forest Service to analyze the effects of alternative flow scenarios at a site on the mainstem Cache la Poudre River in Larimer County, Colorado, near Kinikinik (40° 42' 44.16" N. lat, 105° 44' 30.70" W. log), as shown in figure 1. It will be used in pending environmental analyses and decisions for the occupancy and use of the Arapaho-Roosevelt National Forest by water storage facilities. The water management scenarios of interest in this study are related to releasing water from Chambers and Barnes Meadows Reservoirs, based on the assumption that winter flow augmentation can increase potential fish habitat. Figure 2 shows the relationship between Chambers, Barnes Meadows, and Long Draw Reservoirs. At the time this study was proposed, existing flow simulation results showed that the channel constraints imposed by existing artificial low-head dikes would have little or no effect on the hydrodynamics of the river at the low flow levels that were to be evaluated. The Kinikinik study site contains deep pools, riffles, and runs. This diversity of habitat types made it ideal for assessing the effects of altered flow on fish habitat under ice in the main stem Cache la Poudre River. Thus, the Kinikinik site was selected for this study of winter habitat conditions. The preexisting topographic and hydrologic data collected at this site enabled data collection efforts for this study to focus on describing streamflow and ice cover during the winter months. A two-dimensional hydrodynamic model, River2D (Steffler and Blackburn, 2002), was used to simulate flow conditions under the ice cover that was observed January 24, 2006. The objectives of this study are (1) to describe the extent and thickness of ice cover, (2) simulate depth and velocity under ice at the study site for observed and reduced flows, and (3) to quantify fish habitat in this portion of the mainstem Cache la Poudre River for the current winter release schedule as well as for similar conditions without the 0.283 m 3 /s winter release.

Colorado↗

Effects of urbanization on stream ecosystems in the Willamette River basin and surrounding area, Oregon and Washington

This report describes the effects of urbanization on physical, chemical, and biological characteristics of stream ecosystems in 28 watersheds along a gradient of urbanization in the Willamette River basin and surrounding area, Oregon and Washington, from 2003 through 2005. The study that generated the report is one of several urban-effects studies completed nationally by the U.S. Geological Survey National Water-Quality Assessment Program. Watersheds were selected to minimize natural variability caused by factors such as geology, elevation, and climate, and to maximize coverage of different stages of urban development among watersheds. Because land use or population density alone often are not a complete measure of urbanization, a combination of land use, land cover, infrastructure, and socioeconomic variables were integrated into a multimetric urban intensity index (UII) to represent the degree of urban development in each watershed. Physical characteristics studied include stream hydrology, stream temperature, and habitat; chemical characteristics studied include sulfate, chloride, nutrients, pesticides, dissolved and particulate organic and inorganic carbon, and suspended sediment; and biological characteristics studied include algal, macroinvertebrate, and fish assemblages. Semipermeable membrane devices, passive samplers that concentrate trace levels of hydrophobic organic contaminants such as polycyclic aromatic hydrocarbons and polychlorinated biphenyls, also were used. The objectives of the study were to (1) examine physical, chemical, and biological responses along the gradient of urbanization and (2) determine the major physical, chemical, and landscape variables affecting the structure of aquatic communities. Common effects documented in the literature of urbanization on instream physical, chemical, and biological characteristics, such as increased contaminants, increased streamflow flashiness, increased concentrations of chemicals, and changes in aquatic community structure toward a more tolerant community associated with organically enriched conditions, generally were observed in this study. The strongest correlations to the UII and to many of the algal, macroinvertebrate, and fish assemblage metrics and community ordination involved water-chemistry metrics including the total pesticide concentration, toxic equivalents (extract assay from semipermeable membrane devices), and dissolved oxygen. Hydrologic variability metrics, such as flashiness, that normally are considered to be one of the main processes of urban disturbance had a strong association to the algal and fish assemblages in this study; however, the hydrologic variables for macroinvertebrates were secondary to the water-chemistry metrics mentioned above. Generally, the high urban intensity sites had high abundances of eutrophic and lower dissolved oxygen-indicating diatoms, high abundances of noninsects and tolerant insects, and high abundances of nonnative fish species. On the other hand, the low urban intensity sites had higher abundances of pollution sensitive diatoms, larger numbers of the sensitive macroinvertebrate EPT taxa (Ephemeroptera, Plecoptera and Trichoptera Orders), and fish assemblages with higher abundances of sensitive salmonids. The percent salmonid and macroinvertebrate EPT richness metrics plotted against the UII indicated a possible threshold response at about 25 on the UII, which is equivalent to an impervious surface value of about 5 percent. However, due to the added agricultural land use at sites within the 25 to 60 UII range, this possible threshold probably is not solely due to urbanization, but a combination of urban and agricultural land use. The effects of agricultural and urban land use could not be distinguished from each other, yet combined they provide a good assessment of overall watershed disturbance.

Oregon, Washington↗

Geologic map of the Big Delta B-2 quadrangle, east-central Alaska

New 1:63,360-scale geologic mapping of the Big Delta B-2 quadrangle provides important data on the structural setting and age of geologic units, as well as on the timing of gold mineralization plutonism within the Yukon-Tanana Upland of east-central Alaska. Gold exploration has remained active throughout the region in response to the discovery of the Pogo gold deposit, which lies within the northwestern part of the quadrangle near the south bank of the Goodpaster River. Geologic mapping and associated geochronological and geochemical studies by the U.S. Geological Survey (USGS) and the Alaska Department of Natural Resources, Division of Mining and Water Management, provide baseline data to help understand the regional geologic framework. Teck Cominco Limited geologists have provided the geologic mapping for the area that overlies the Pogo gold deposit as well as logistical support, which has lead to a much improved and informative product. The Yukon-Tanana Upland lies within the Tintina province in Alaska and consists of Paleozoic and possibly older(?) supracrustal rocks intruded by Paleozoic (Devonian to Mississippian) and Cretaceous plutons. The oldest rocks in the Big Delta B-2 quadrangle are Paleozoic gneisses of both plutonic and sedimentary origin. Paleozoic deformation, potentially associated with plutonism, was obscured by intense Mesozoic deformation and metamorphism. At least some of the rocks in the quadrangle underwent tectonism during the Middle Jurassic (about 188 Ma), and were subsequently deformed in an Early Cretaceous contractional event between about 130 and 116 Ma. New U-Pb SHRIMP data presented here on zircons from the Paleozoic biotite gneisses record inherited cores that range from 363 Ma to about 2,130 Ma and have rims of euhedral Early Cretaceous metamorphic overgrowths (116 +/- 4 Ma), interpreted to record recrystallization during Cretaceous west-northwest-directed thrusting and folding. U-Pb SHRIMP dating of monazite from a Paleozoic gneiss sample yields an age of 112 +/- 2 Ma; the monazite presumably grew during the waning stages of the intense regional Cretaceous ductile deformation. The Cretaceous ductile deformation was followed closely by granite plutonism and gold mineralization. The main pulse of gold mineralization is temporally and spatially associated with the Cretaceous granitic dikes and plutons and occurred during regional uplift and extension.

IMAP↗

40Ar/39Ar thermochronology of mesoproterozoic metamorphism in the Colorado Front Range

A low-pressure metamorphic episode in the Colorado Front Range has been identified by the presence of staurolite, andalusite, cordierite, and garnet porphyroblasts overprinting earlier assemblages. The overprinting assemblages and reaction textures are most consistent with porphyroblast growth on a prograde metamorphic path with peak temperatures exceeding ~525??C. Twenty-eight 40Ar/39Ar dates on hornblende, muscovite, biotite, and microcline were used to infer the age and thermal conditions of metamorphism. Muscovite and biotite 40Ar/39Ar ages fall mainly in the interval 1400-1340 Ma, consistent with cooling through the closure temperature interval of micas (~400??-300??C) after about 1400 Ma. In contrast, hornblende apparent ages (T(c)~500??-550??C) between 1600 and 1390 Ma reflect variable retention of radiogenic argon. Forward modeling of argon diffusion shows that the distribution of hornblende and mica ages is consistent with the partial resetting of argon systematics ca. 1400 Ma by a thermal pulse reaching maximum temperatures around 550??C and decaying within <20 m.yr. These temperatures match the conditions inferred from the overprinting assemblage; thus, muscovite and biotite ages are interpreted to date the cooling phase of this metamorphic event. This late metamorphism is broadly coeval with the intrusion of ca. 1400-Ma granitic plutons in the study area and throughout the southwestern United States. However, thermal effects are observed far from pluton margins, suggesting pervasive, regional crustal heating rather than restricted contact metamorphism. Our results suggest that ca. 1400-Ma metamorphism and plutonism are manifestations of a regional thermal episode that both partially melted the lower crust and pervasively metamorphosed middle crustal rocks.

Journal of Geology↗

Water-quality assessment of the upper Snake River Basin, Idaho and western Wyoming — Environmental setting, 1980-92

The 35,800-square-mile upper Snake River Basin is one of 20 areas studied as part of the National Water-Quality Assessment (NAWQA) Program of the U.S. Geological Survey. Objectives of NAWQA are to study ground- and surface-water quality, biology, and their relations to land-use activities. Major land and water uses that affect water quality in the basin are irrigated agriculture, grazing, aquaculture, food processing, and wastewater treatment. Data summarized in this report are used in companion reports to help define the relations among land use, water use, water quality, and biological conditions. The upper Snake River Basin is located in southeastern Idaho and northwestern Wyoming and includes small parts of Nevada and Utah. Total population in the basin was about 425,000 in 1990. Major urban areas are Idaho Falls, Pocatello, Rexburg, and Twin Falls, Idaho, which make up 10, 11,3, and 6 percent of the total population, respectively. Climate in the basin is mostly semiarid and mean annual precipitation ranges from 8 to more than 60 inches. The eastern Snake River Plain is the major geologic feature in the basin and is delineated mostly by Quaternary and Tertiary basalt flows. It is about 55 to 62 miles wide and 320 miles long and bisects the basin in a northeast-southwest direction. The Snake River is the dominant surface-water feature and flows about 453 miles from the southern border of Yellowstone National Park in Wyoming to King Hill, Idaho, where it leaves the basin. The Snake River flows through five reservoirs that provide a total storage capacity of more than 4 million acre-feet. Gravity-flow diversions are predominant in the upper part of the basin and totaled 8.8 million.acre-feet in 1980. Pumped diversions occur mainly in the lower part of the basin and totaled 408,500 acre-feet in 1980. The Snake River Plain aquifer is the predominant ground-water feature in the upper Snake River Basin and underlies the eastern Snake River Plain. The upper 500 feet of the aquifer may store 200 to 300 million acre-feet of water. Ground-water resources that supply agricultural lands are sustained by recharge from surface-water irrigation, precipitation, and tributary inflow. Major ground-water discharges are at springs and seeps or from ground-water pumpage for irrigation. Water use in the basin is dominated by irrigated agriculture, which is the largest consumptive water use in the basin. Major crops in the basin include potatoes, wheat, sugar beets, hay, and barley. Most irrigation needs are supplied from surface-water sources through a series of canals and laterals. In 1990, about 2.5 million acres were irrigated with more than 14.2 million acre-feet of surface and ground water. About 21 percent of the basin is agricultural land and 50 percent is rangeland. Idaho leads the Nation in trout production for commercial sale. Combined mean annual discharges from 12 aquacultural facilities in the basin (1985-90) were about 787,000 acre-feet. These facilities are clustered in a reach of the Snake River between Milner Dam and King Hill where ground-water discharge is from many seeps and springs that provide sufficient quantities of good-quality water. Other facilities that release effluent to the Snake River include 13 municipal wastewater treatment plants and 3 industrial facilities.

Idaho, Wyoming↗

Titaniferous sedimentary rocks in the Cuyuna district, central Minnesot

The ore-yielding main iron-formation of the Cuyuna district is strati-graphically overlain by approximately 300 feet of titaniferous sedimentary rocks, and a field test for titahia has been an effective supplement to customary stratigraphic studies. The titanium is in leucoxene. The sedimentary rocks of the district are highly folded, and the main iron-formation serves as the reference for relative stratigraphic position. The strata older than the main iron-formation are light-gray argillite and siltstone with local lenses of quartzite near the upper contact; the older strata contain about 0.5 percent titania. The main iron-formation is a persistent layer of chemically precipitated ferruginous sediments that contain about 0.2 percent titania. The strata younger than the main iron-formation are gray or black argillite, partly carbonaceous, partly ferruginous, and are transitional into lenses of lean upper iron-formation. At the base of the younger strata, 250-350 feet of argillite and slate contain 1-3.7 percent titania and average 2.0 percent. This titaniferous argillite is similar to argillite higher in the younger sequence which contains less than 1.5 percent titania and averages about 1 percent. There are weathered rocks interpreted as tuffs and basalt flows locally interlayered near the bottom of the titaniferous zone. The basalt contains 1-2 percent titania. The high titania content of the 250-350-foot zone suggests a volcanic origin; the argillite probably is reworked basaltic pyroclastics. A few titaniferous bodies have been found in rocks below, within, and above the main iron-formation and thin titaniferous argillaceous layers occur within the main iron-formation.

Minnesota↗

Assessment of riparian vegetation patterns and change downstream from Glen Canyon Dam from 2014 to 2019

Changes in riparian vegetation cover and composition occur in relation to flow regime, geomorphic template, and climate, and can have cascading effects on aquatic and terrestrial ecosystems. Tracking such changes over time is therefore an important part of monitoring the condition and trajectory of riparian ecosystems. Maintaining diverse, self-sustaining riparian vegetation comprised of mostly native species is identified in the Glen Canyon Dam Long-Term Experimental and Management Plan as a key resource objective for the section of the Colorado River between Glen Canyon Dam and Lake Mead. The U.S. Geological Survey Grand Canyon Monitoring and Research Center implemented an annual monitoring program in 2014 to assess the status and trends of riparian vegetation along this section of river, particularly as they relate to flow regime. In this report, we summarize plant species composition and cover data collected under the annual monitoring program from 2014 to 2019, with special consideration given to the hydrologic position, associated geomorphic feature class, local climate patterns, native and nonnative species, and floristic region for key vegetation metrics and species. We divided the study area into four river segments (referred to as Glen Canyon, Marble Canyon, eastern Grand Canyon, and western Grand Canyon) on the basis of geography and floristic composition and calculated each recorded plant species’ relative frequency and foliar cover by river segment. These data were then used to evaluate species composition relationships among river segments, hydrologic zones, geomorphic features, and sampling years through ordination analysis. Temporal trends in our focal resource objectives—species richness, total foliar cover, proportion of native to nonnative species richness, proportion of native to nonnative species cover, Tamarix cover, Pluchea sericea cover, and Baccharis species cover—were assessed using mixed-effects models. Four patterns related to species composition emerged: (1) species composition of fixed-site sandbars differed from that of randomly selected sites (including randomly selected sandbars), (2) species composition of Glen Canyon sites differed from that of other previously identified floristic regions, (3) species composition differed across hydrologic zones related to dam operations, and (4) species composition within river segments did not change across years. For temporal patterns, four main findings emerged: (1) trends differed between fixed-sites and randomly selected sites; (2) although few directional changes were observed from 2014 to 2019, Baccharis species cover increased at randomly selected sites in areas influenced by daily water fluctuations; (3) native species cover and richness were greater than nonnative species cover and richness across all hydrologic zones; and (4) the temporal trend metrics used here can be used across floristic groups, enabling assessment of the Colorado River ecosystem as a whole. In addition to these findings, lists of recorded plant species are included as appendixes. The variations and patterns in vegetation status and trends presented in this report can be used as a baseline against which future monitoring can be compared.

Arizona↗

Relation of urban land-use and dry-weather, storm, and snowmelt flow characteristics to stream-water quality, Shunganunga Creek basin, Topeka, Kansas

Overland runoff from urban areas can cause concentrations of some water-quality constituents in local receiving streams to increase. The U.S. Geological Survey in cooperation with the Kansas Department of Health and Environment investigated the water-quality characteristics of streams draining Topeka, Kansas, and adjacent parts of the Shunganunga Creek basin from October 1979 through November 1981. The purpose of this investigation was to provide the data and interpretation necessary to determine the effects of runoff from urban areas on the water-quality characteristics of receiving streams. Water-quality characteristics for three streamflow conditions were determined: (1) dry-weather streamflow--a combination of base flow and point-source contributions, (2) storm streamflow--mainly provided by overland runoff from storms, and (3) snowmelt streamflow- mainly provided by overland runoff from snowmelt. Median concentrations of trace metals and nutrients were larger in storm streamflow than in dry-weather streamflow. Median concentrations of total lead and zinc were largest in storm streamflow from the more urban basins. Regression equations were developed to estimate median concentrations of total lead and zinc in storm streamflow from the percentage of drainage area in residential plus commercial land-use areas (correlation coefficients were 0.98 for total lead and 0.88 for total zinc); and from street density in lane miles per square mile (correlation coefficients were 0.89 for total lead and 0.84 for total zinc). Median concentrations of dissolved nitrite plus nitrate nitrogen and total phosphorus averaged, respectively, 76-percent and 70-percent larger during storm streamflow than during dry-weather streamflow and were largest in storm streamflow from the more agricultural basins. Median concentrations of dissolved sodium, chloride, and solids in snowmelt streamflow at all study sites averaged 218-percent larger for dissolved sodium, 296-percent larger for dissolved chloride, and 71-percent larger for dissolved solids relative to median concentrations in dry-weather streamflow. Regression equations also were developed to estimate median concentrations of dissolved sodium, chloride, and solids in snowmelt streamflow from the summation of percentages of the drainage area in residential, commercial, and industrial land-use areas (correlation coefficients were 0.97 for each of the three relationships) and from street density in lane miles per square mile (correlation coefficients were 0.93 for dissolved sodium and 0.94 for both dissolved chloride and dissolved solids). Multiple-correlation and regression analysis relating storm-runoff volumes and average constituent concentrations to land-use and storm characteristics produced significant relations (0.05 level of significance) for storm-runoff volume (0.81 coefficient of determination), total lead (0.71 coefficient of determination), total zinc (0.50 coefficient of determination), and suspended sediment (0.58 coefficient of determination).

Kansas↗

Reconnaissance study of the major and trace element content of bauxite deposits in the Arkansas bauxite region, Saline and Pulaski Counties, central Arkansas

The Arkansas bauxite district, which comprises about 275 square miles (710 square kilometers) of central Arkansas, produced an order of magnitude more bauxite and alumina than the other bauxite districts in the United States combined. Bauxite was mined in the region continuously from 1898 to 1982. These bauxites are laterite deposits, formed from intensive in-place weathering of the exposed surface of the Granite Mountain pluton, a Late Cretaceous batholith composed mainly of nepheline syenite and lesser amounts of syenite. Nepheline syenite was the aluminum source for the bauxite and clay deposits that blanket the pluton. The early Eocene continental sedimentary rocks that contain and overlie the bauxite deposits indicate that central Arkansas had a warm tropical environment during bauxite formation. Bauxite ores are the principal sources of aluminum. Some of the global bauxite deposits have been found to contain co-occurring metals that have essential applications in modern technologies. For example, bauxite is the largest global source of gallium (Ga), used in semiconductors, which is recovered as a byproduct of processing bauxite to recover alumina. Other critical metal commodities within some bauxites that reportedly have potential for byproduct recovery include niobium (Nb), scandium (Sc), and rare earth elements (REEs). Currently (2021), the United States is wholly dependent on imports for its supplies of bauxite for processing to produce alumina. The United States is also dependent on foreign sources of gallium, niobium, and scandium, as well for most of its domestic requirements of REEs. For these reasons, samples were collected from Arkansas bauxite deposits, associated clays, mill residue wastes (respectively referred to as red muds and black sands), and the parent nepheline syenite to determine their elemental content, with a particular focus on gallium, niobium, scandium, and REEs. Each sample was analyzed for 60 elements; these data and the methods used are published as a U.S. Geological Survey data release. The results indicate that, of the critical metals in bauxites, gallium is a potential byproduct from the central Arkansas bauxite deposits. The highest gallium concentrations occur in the raw bauxite ore, with an average concentration of 76 parts per million (ppm). Gallium partitions with alumina (the product) rather than into mine waste residues. Results indicate an average niobium content of 662 ppm in the Arkansas bauxite ores. Niobium progressively increases in concentration from parent syenite (247 ppm) to clays (315 ppm) and further from bauxite (662 ppm) to processed residues (1,075 ppm). Low concentrations of scandium were found in all samples, averaging 10 ppm or less in the parent rock (syenite), bauxite, clays, and processing residues. Modest concentrations of the light and heavy REEs were found in samples of bauxite ores, bauxitic clays and interbedded clays, syenite, and the residues of ore. The highest REE values were found in processed residues, with average concentrations of 613 ppm total light REEs and 130 ppm total heavy REEs. These concentrations suggest that additional processing to recover REEs is unlikely to be economic in the foreseeable future.

Arkansas↗

Trace and minor element variations and sulfur isotopes in crystalline and colloform ZnS: Incorporation mechanisms and implications for their genesis

Various models have been proposed to explain the formation mechanism of colloform sphalerite, but the origin is still under debate. In order to decipher influences on trace element incorporation and sulfur isotope composition, crystalline and colloform sphalerite from the carbonate-hosted Mississippi-Valley Type (MVT) deposit near Wiesloch, SW Germany, were investigated and compared to sphalerite samples from 52 hydrothermal vein-type deposits in the Schwarzwald ore district, SW Germany to study the influence of different host rocks, formation mechanisms and fluid origin on trace element incorporation. Trace and minor element incorporation in sphalerite shows some correlation to their host rock and/or origin of fluid, gangue, paragenetic minerals and precipitation mechanisms (e.g., diagenetic processes, fluid cooling or fluid mixing). Furthermore, crystalline sphalerite is generally enriched in elements like Cd, Cu, Sb and Ag compared to colloform sphalerite that mainly incorporates elements like As, Pb and Tl. In addition, sulfur isotopes are characterized by positive values for crystalline and strongly negative values for colloform sphalerite. The combination of trace element contents, typical minerals associated with colloform sphalerite from Wiesloch, sulfur isotopes and thermodynamic considerations helped to evaluate the involvement of sulfate-reducing bacteria in water-filled karst cavities. Sulfate-reducing bacteria cause a sulfide-rich environment that leads in case of a metal-rich fluid supply to a sudden oversaturation of the fluid with respect to galena, sphalerite and pyrite. This, however, exactly coincides with the observed crystallization sequence of samples involving colloform sphalerite from the Wiesloch MVT deposit.

Wiesloch↗