SEARCH · Geology Reports

Results for “Sensors”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

USGS2013

Evapotranspiration and water balance of an anthropogenic coastal desert wetland: responses to fire, inflows and salinities

Evapotranspiration (ET) and other water balance components were estimated for Cienega de Santa Clara, an anthropogenic brackish wetland in the delta of the Colorado River in Mexico. The marsh is in the Biosphere Reserve of the Upper Gulf of California and Delta of the Colorado River, and supports a high abundance and diversity of wildlife. Over 95% of its water supply originates as agricultural drain water from the USA, sent for disposal in Mexico. This study was conducted from 2009 to 2011, before, during and after a trial run of the Yuma Desalting Plant in the USA, which will divert water from the wetland and replace it with brine from the desalting operation. The goal was to estimate the main components in the water budget to be used in creating management scenarios for this marsh. We used a remote sensing algorithm to estimate ET from meteorological data and Enhanced Vegetation Index values from the Moderate Resolution Imaging Spectrometer (MODIS) sensors on the Terra satellite. ET estimates from the MODIS method were then compared to results from a mass balance of water and salt inflows and outflows over the study period. By both methods, mean annual ET estimates ranged from 2.6 to 3.0 mm d −1 , or 50 to 60% of reference ET (ET o ). Water entered at a mean salinity of 2.6 g L −1 TDS and mean salinity in the wetland was 3.73 g L −1 TDS over the 33 month study period. Over an annual cycle, 54% of inflows supported ET while the rest exited the marsh as outflows; however, in winter when ET was low, up to 90% of the inflows exited the marsh. An analysis of ET estimates over the years 2000–2011 showed that annual ET was proportional to the volume of inflows, but was also markedly stimulated by fires. Spring fires in 2006 and 2011 burned off accumulated thatch, resulting in vigorous growth of new leaves and a 30% increase in peak summer ET compared to non-fire years. Following fires, peak summer ET estimates were equal to ET o , while in non-fire years peak ET was equal to only one-half to two-thirds of ET o . Over annual cycles, estimated ET was always lower than ET o , because T. domingensis is dormant in winter and shades the water surface, reducing direct evaporation. Thus, ET of a Typha marsh is likely to be less than an open water surface under most conditions.

Ecological Engineering↗

USGS2013

Vegetation dynamics in response to water inflow rates and fire in a brackish Typha domingensis Pers. marsh in the delta of the Colorado River, Mexico

The Cienega de Santa Clara is a 5600 ha, anthropogenic wetland in the delta of the Colorado River in Mexico. It is the inadvertent creation of the disposal of brackish agricultural waste water from the U.S. into the intertidal zone of the river delta in Mexico, but has become an internationally important wetland for resident and migratory water birds. We used high resolution Quickbird and WorldView-2 images to produce seasonal vegetation maps of the Cienega before, during and after a test run of the Yuma Desalting Plant, which will remove water from the inflow stream and replace it with brine. We also used moderate resolution, 16-day composite NDVI imagery from the Moderate Resolution Imaging Spectrometer (MODIS) sensors on the Terra satellite to determine the main factors controlling green vegetation density over the years 2000–2011. The marsh is dominated by Typha domingensis Pers. with Phragmites australis (Cav.) Trin. Ex Steud. as a sub-dominant species in shallower marsh areas. The most important factor controlling vegetation density was fire. Spring fires in 2006 and 2011 were followed by much more rapid green-up of T. domingensis in late spring and 30% higher peak summer NDVI values compared to non-fire years ( P < 0.001). Fires removed thatch and returned nutrients to the water, resulting in more vigorous vegetation growth compared to non-fire years. The second significant ( P < 0.01) factor controlling NDVI was flow rate of agricultural drain water from the U.S. into the marsh. Reduced summer flows in 2001 due to canal repairs, and in 2010 during the YDP test run, produced the two lowest NDVI values of the time series from 2000 to 2011 ( P < 0.05). Salinity is a further determinant of vegetation dynamics as determined by greenhouse experiments, but was nearly constant over the period 2000–2011, so it was not a significant variable in regression analyses. It is concluded that any reduction in inflow volumes will result in a linear decrease in green foliage density in the marsh.

Ecological Engineering↗

USGS2021

Satellite remote sensing to assess cyanobacterial bloom frequency across the United States at multiple spatial scales

Cyanobacterial blooms can have negative effects on human health and local ecosystems. Field monitoring of cyanobacterial blooms can be costly, but satellite remote sensing has shown utility for more efficient spatial and temporal monitoring across the United States. Here, satellite imagery was used to assess the annual frequency of surface cyanobacterial blooms, defined for each satellite pixel as the percentage of images for that pixel throughout the year exhibiting detectable cyanobacteria . Cyanobacterial frequency was assessed across 2,196 large lakes in 46 states across the continental United States (CONUS) using imagery from the European Space Agency’s Ocean and Land Colour Instrument for the years 2017 through 2019. In 2019, across all satellite pixels considered, annual bloom frequency had a median value of 4% and a maximum value of 100%, the latter indicating that for those satellite pixels, a cyanobacterial bloom was detected by the satellite sensor for every satellite image considered. In addition to annual pixel-scale cyanobacterial frequency, results were summarized at the lake- and state-scales by averaging annual pixel-scale results across each lake and state. For 2019, average annual lake-scale frequencies also had a maximum value of 100%, and Oregon and Ohio had the highest average annual state-scale frequencies at 65% and 52%. Pixel-scale frequency results can assist in identifying portions of a lake that are more prone to cyanobacterial blooms, while lake- and state-scale frequency results can assist in the prioritization of sampling resources and mitigation efforts. Satellite imagery is limited by the presence of snow and ice, as imagery collected in these conditions are quality flagged and discarded. Thus, annual bloom frequencies within nine climate regions were investigated to determine whether missing data biased results in climate regions more prone to snow and ice, given that their annual summaries would be weighted toward the summer months when cyanobacterial blooms tend to occur. Results were unbiased by the time period selected in most climate regions, but a large bias was observed for the Northwest Rockies and Plains climate region. Moderate biases were observed for the Ohio Valley and the Southeast climate regions. Finally, a clustering analysis was used to identify areas of high and low cyanobacterial frequency across CONUS based on average annual lake-scale cyanobacterial frequencies for 2019. Several clusters were identified that transcended state, watershed, and eco-regional boundaries. Combined with additional data, results from the clustering analysis may offer insight regarding large-scale drivers of cyanobacterial blooms.

Ecological Indicators↗

USGS2022

Satellites quantify the spatial extent of cyanobacterial blooms across the United States at multiple scales

Previous studies indicate that cyanobacterial harmful algal bloom (cyanoHAB) frequency, extent, and magnitude have increased globally over the past few decades. However, little quantitative capability is available to assess these metrics of cyanoHABs across broad geographic scales and at regular intervals. Here, the spatial extent was quantified from a cyanobacteria algorithm applied to two European Space Agency satellite platforms—the MEdium Resolution Imaging Spectrometer (MERIS) onboard Envisat and the Ocean and Land Colour Instrument (OLCI) onboard Sentinel-3. CyanoHAB spatial extent was defined for each geographic area as the percentage of valid satellite pixels that exhibited cyanobacteria above the detection limit of the satellite sensor. This study quantified cyanoHAB spatial extent for over 2,000 large lakes and reservoirs across the contiguous United States (CONUS) during two time periods: 2008–2011 via MERIS and 2017–2020 via OLCI when cloud-, ice-, and snow-free imagery was available. Approximately 56% of resolvable lakes were glaciated, 13% were headwater, isolated, or terminal lakes, and the rest were primarily drainage lakes. Results were summarized at national-, regional-, state-, and lake-scales, where regions were defined as nine climate regions which represent climatically consistent states. As measured by satellite, changes in national cyanoHAB extent did have a strong increase of 6.9% from 2017 to 2020 (|Kendall’s tau (τ)| = 0.56; gamma (γ) = 2.87 years), but had negligible change (|τ| = 0.03) from 2008 to 2011. Two of the nine regions had moderate (0.3 ≤ |τ| < 0.5) increases in spatial extent from 2017 to 2020, and eight of nine regions had negligible (|τ| < 0.2) change from 2008 to 2011. Twelve states had a strong or moderate increase from 2017 to 2020 (|τ| ≥ 0.3), while only one state had a moderate increase and two states had a moderate decrease from 2008 to 2011. A decrease, or no change, in cyanoHAB spatial extent did not indicate a lack of issues related to cyanoHABs. Sensitivity results of randomly omitted daily CONUS scenes confirm that even with reduced data availability during a short four-year temporal assessment, the direction and strength of the changes in spatial extent remained consistent. We present the first set of national maps of lake cyanoHAB spatial extent across CONUS and demonstrate an approach for quantifying past and future changes at multiple spatial scales. Results presented here provide water quality managers information regarding current cyanoHAB spatial extent and quantify rates of change.

Ecological Indicators↗

USGS2022

A water quality barometer for Chesapeake Bay: Assessing spatial and temporal patterns using long-term monitoring data

This paper develops a barometer that indexes water quality in the Chesapeake Bay and summarizes quality over spatial regions and temporal periods. The barometer has a basis in risk assessment and hydrology, and is a function of three different metrics of water quality relative to numerical criteria: relative frequency of criterion attainment; magnitude of deviation from a numerical criterion; and duration of criterion attainment. Metrics associated with these features are calculated at the station level, allowing flexibility for simultaneously evaluating multiple stressors, different designated uses, and physical characteristics of the water. The barometer score is then created as a geometric mean of the three metrics. The water quality barometer (WQB) station scores may be spatially aggregated to report habitat scores across a spectrum of spatial resolutions (e.g., management segment, tidal subsystem, or the whole tidal bay). Dissolved oxygen measurements in the Chesapeake Bay collected during summer seasons of 1985 to 2020 are used to evaluate water quality. The WQB score and its bootstrapped confidence interval are reported at the station, segment, tidal subsystem and whole tidal bay levels. Notably, water quality interpreted through application of the WQB with dissolved oxygen concentration data and averaged over the 29-year period of record is good (i.e. protects aquatic living resources) in tributaries such as the James River, Rappahannock River and others; but is not as good in areas such as the Upper Tributaries and the York River. Recent summaries indicate that while the water quality is improving in much of the bay and its tidal tributaries, however, there is an indication of decline in quality in the period 20182020, especially in the upper regions of the Bay. The barometer is designed around using the time series data produced by the Chesapeake Bay Programs annual monitoring strategy; the approach has application to other large water bodies with large scale monitoring programs with extended time series or for integrating information from environmental sensor systems.

Maryland, Virginia↗

USGS2025

Small waterbodies of large conservation concern: Towards an integrated approach to more accurately measuring surface water dynamics

Millions of small waterbodies are dispersed throughout the middle of the North American continent, and billions of dollars have been invested to conserve, restore, and manage these waterbodies in the 20th and 21st centuries. Small waterbody conservation has been supported by different stakeholders aiming at improving water quality, enhancing floodwater storage, and supporting migratory bird breeding habitat. Conservation agencies are using hydrological and biological monitoring, modeling, and mapping to adaptively manage small waterbodies in the face of stressors such as invasive species and climate change. As remote sensing estimates of small waterbody surface water extent have become easier to access, understanding the capabilities and limitations of using remote sensing, especially in areas lacking surface water monitoring, is important for conservation decision making. Here, we used in situ monitoring and process-based hydrological modeling to explore remote sensing accuracy, especially related to waterbody size, emergent aquatic vegetation cover, and climatic conditions. Overall, we found that the accuracy of satellite and aerial imagery surface water mapping approaches vastly decreased for waterbodies smaller than 2 ha. We also found emergent vegetation could be masking surface water in waterbodies larger than 2 ha and that accuracy of some remote sensing estimates may decrease during wetter climatic periods. These results indicate that sensors commonly used for surface water applications alone may not be able to accurately detect small waterbody surface water, which supports the need for combining monitoring and modeling to understand how small waterbodies may respond to future changes in climate and land use.

Minnesota↗

USGS2009

Ultraviolet absorbance as a proxy for total dissolved mercury in streams

Stream water samples were collected over a range of hydrologic and seasonal conditions at three forested watersheds in the northeastern USA. Samples were analyzed for dissolved total mercury (THg d ), DOC concentration and DOC composition, and UV 254 absorbance across the three sites over different seasons and flow conditions. Pooling data from all sites, we found a strong positive correlation of THg d to DOC (r 2 = 0.87), but progressively stronger correlations of THg d with the hydrophobic acid fraction (HPOA) of DOC (r 2 = 0.91) and with UV 254 absorbance (r 2 = 0.92). The strength of the UV 254 absorbance-THg d relationship suggests that optical properties associated with dissolved organic matter may be excellent proxies for THg d concentration in these streams. Ease of sample collection and analysis, the potential application of in-situ optical sensors, and the possibility for intensive monitoring over the hydrograph make this an effective, inexpensive approach to estimate THg d flux in drainage waters.

Environmental Pollution↗

USGS2015

Automated calculation of surface energy fluxes with high-frequency lake buoy data

Lake Heat Flux Analyzer is a program used for calculating the surface energy fluxes in lakes according to established literature methodologies. The program was developed in MATLAB for the rapid analysis of high-frequency data from instrumented lake buoys in support of the emerging field of aquatic sensor network science. To calculate the surface energy fluxes, the program requires a number of input variables, such as air and water temperature, relative humidity, wind speed, and short-wave radiation. Available outputs for Lake Heat Flux Analyzer include the surface fluxes of momentum, sensible heat and latent heat and their corresponding transfer coefficients, incoming and outgoing long-wave radiation. Lake Heat Flux Analyzer is open source and can be used to process data from multiple lakes rapidly. It provides a means of calculating the surface fluxes using a consistent method, thereby facilitating global comparisons of high-frequency data from lake buoys.

Environmental Modelling and Software↗

USGS2008

On developing thermal cave detection techniques for earth, the moon and mars

The purpose of this study is to (1) demonstrate the viability of detecting terrestrial caves at thermal-infrared wavelengths, (2) improve our understanding of terrestrial cave thermal behavior, (3) identify times of day when cave openings have the maximum thermal contrast with the surrounding surface regolith, and (4) further our understanding of how to detect caves on Earth, the Moon and Mars. We monitored the thermal behavior of two caves in the Atacama Desert of northern Chile. Through this work, we identified times when temperature contrasts between entrance and surface were greatest, thus enabling us to suggest optimal overflight times. The largest thermal contrast for both caves occurred during mid-day. One cave demonstrated thermal behavior at the entrance suggestive of cold-trapping, while the second cave demonstrated temperature shifts suggestive of airflow. We also collected thermograms without knowing optimal detection times; these images suggest both caves may also be detectable during off-peak times. We suggest cave detection using thermal remote sensing on Earth and other planetary objects will be limited by (1) capturing imagery in the appropriate thermal wavelength, (2) the size of cave entrance vs. the sensor's spatial resolution, (3) the viewing angle of the platform in relation to the slope trajectory of the cave entrance, (4) the strength of the thermal signal associated with the cave entrance, and (5) the time of day and season of thermal image capture. Through this and other studies, we will begin to identify the range of conditions under which caves are detectable in the thermal infrared and thus improve our detection capabilities of these features on Earth, the Moon and Mars.

Earth and Planetary Science Letters↗

USGS2005

Estimating stand structure using discrete-return lidar: an example from low density, fire prone ponderosa pine forests

The ponderosa pine forests of the Colorado Front Range, USA, have historically been subjected to wildfires. Recent large burns have increased public interest in fire behavior and effects, and scientific interest in the carbon consequences of wildfires. Remote sensing techniques can provide spatially explicit estimates of stand structural characteristics. Some of these characteristics can be used as inputs to fire behavior models, increasing our understanding of the effect of fuels on fire behavior. Others provide estimates of carbon stocks, allowing us to quantify the carbon consequences of fire. Our objective was to use discrete-return lidar to estimate such variables, including stand height, total aboveground biomass, foliage biomass, basal area, tree density, canopy base height and canopy bulk density. We developed 39 metrics from the lidar data, and used them in limited combinations in regression models, which we fit to field estimates of the stand structural variables. We used an information–theoretic approach to select the best model for each variable, and to select the subset of lidar metrics with most predictive potential. Observed versus predicted values of stand structure variables were highly correlated, with r 2 ranging from 57% to 87%. The most parsimonious linear models for the biomass structure variables, based on a restricted dataset, explained between 35% and 58% of the observed variability. Our results provide us with useful estimates of stand height, total aboveground biomass, foliage biomass and basal area. There is promise for using this sensor to estimate tree density, canopy base height and canopy bulk density, though more research is needed to generate robust relationships. We selected 14 lidar metrics that showed the most potential as predictors of stand structure. We suggest that the focus of future lidar studies should broaden to include low density forests, particularly systems where the vertical structure of the canopy is important, such as fire prone forests.

Colorado↗

USGS2015

The Landscape Evolution Observatory: a large-scale controllable infrastructure to study coupled Earth-surface processes

Zero-order drainage basins, and their constituent hillslopes, are the fundamental geomorphic unit comprising much of Earth's uplands. The convergent topography of these landscapes generates spatially variable substrate and moisture content, facilitating biological diversity and influencing how the landscape filters precipitation and sequesters atmospheric carbon dioxide. In light of these significant ecosystem services, refining our understanding of how these functions are affected by landscape evolution, weather variability, and long-term climate change is imperative. In this paper we introduce the Landscape Evolution Observatory (LEO): a large-scale controllable infrastructure consisting of three replicated artificial landscapes (each 330 m 2 surface area) within the climate-controlled Biosphere 2 facility in Arizona, USA. At LEO, experimental manipulation of rainfall, air temperature, relative humidity, and wind speed are possible at unprecedented scale. The Landscape Evolution Observatory was designed as a community resource to advance understanding of how topography, physical and chemical properties of soil, and biological communities coevolve, and how this coevolution affects water, carbon, and energy cycles at multiple spatial scales. With well-defined boundary conditions and an extensive network of sensors and samplers, LEO enables an iterative scientific approach that includes numerical model development and virtual experimentation, physical experimentation, data analysis, and model refinement. We plan to engage the broader scientific community through public dissemination of data from LEO, collaborative experimental design, and community-based model development.

Arizona↗

USGS2025

Development of ‘SedCam’— A close-range remote sensing method of estimating suspended-sediment concentration in small rivers

The adaptation of suspended-sediment surrogate technologies continues to rapidly expand across geomorphology and fluvial sediment monitoring efforts. Over a decade of research and development shows increased reliability and accuracy of in-situ surrogates with reduced program cost as compared to traditional sample-based methods, but environmental fouling and probe damage can be problematic. The SedCam technique is a unique non-contact close-range remote sensing method to estimate suspended-sediment concentration from multispectral imagery of a river surface. In contrast to typical airborne- or satellite-based platforms, SedCam uses broadband sensors with lower spectral resolution (three bands covering wavelengths of 340 to 1100 nm) but greater spatial resolution (0.5 mm pixel size; equivalent to medium to coarse sand) and temporal resolution (15-min intervals during daylight hours). This paper summarizes lessons learned from two studies, utilizing three consumer-grade digital cameras (each with different spectral signatures) at two different rivers (each with different sediment characteristics). >90,000 images and 174 concurrent physical samples represent a collective period of 26 months. A subset of these data pairs supports the development of four regression models. Statistical diagnostics show model error can be <40 % when surface point samples are used, with coefficients of determination ≥0.90. This novel approach shows similar accuracy to other surrogate methods such as instream turbidity. Results of this study indicate that optimizing spectra based on expected suspended-sediment concentration increases model performance.

Geomorphology↗

USGS2014

Geostatistical estimation of signal-to-noise ratios for spectral vegetation indices

In the past 40 years, many spectral vegetation indices have been developed to quantify vegetation biophysical parameters. An ideal vegetation index should contain the maximum level of signal related to specific biophysical characteristics and the minimum level of noise such as background soil influences and atmospheric effects. However, accurate quantification of signal and noise in a vegetation index remains a challenge, because it requires a large number of field measurements or laboratory experiments. In this study, we applied a geostatistical method to estimate signal-to-noise ratio (S/N) for spectral vegetation indices. Based on the sample semivariogram of vegetation index images, we used the standardized noise to quantify the noise component of vegetation indices. In a case study in the grasslands and shrublands of the western United States, we demonstrated the geostatistical method for evaluating S/N for a series of soil-adjusted vegetation indices derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. The soil-adjusted vegetation indices were found to have higher S/N values than the traditional normalized difference vegetation index (NDVI) and simple ratio (SR) in the sparsely vegetated areas. This study shows that the proposed geostatistical analysis can constitute an efficient technique for estimating signal and noise components in vegetation indices.

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2014

Spectroscopic remote sensing of plant stress at leaf and canopy levels using the chlorophyll 680 nm absorption feature with continuum removal

This paper explores the use of spectral feature analysis to detect plant stress in visible/near infrared wavelengths. A time series of close range leaf and canopy reflectance data of two plant species grown in hydrocarbon-contaminated soil was acquired with a portable spectrometer. The ProSpecTIR-VS airborne imaging spectrometer was used to obtain far range hyperspectral remote sensing data over the field experiment. Parameters describing the chlorophyll 680 nm absorption feature (depth, width, and area) were derived using continuum removal applied to the spectra. A new index, the Plant Stress Detection Index (PSDI), was calculated using continuum-removed values near the chlorophyll feature centre (680 nm) and on the green-edge (560 and 575 nm). Chlorophyll feature’s depth, width and area, the PSDI and a narrow-band normalised difference vegetation index were evaluated for their ability to detect stressed plants. The objective was to analyse how the parameters/indices were affected by increasing degrees of plant stress and to examine their utility as plant stress indicators at the remote sensing level (e.g. airborne sensor). For leaf data, PSDI and the chlorophyll feature area revealed the highest percentage (67–70%) of stressed plants. The PSDI also proved to be the best constraint for detecting the stress in hydrocarbon-impacted plants with field canopy spectra and airborne imaging spectroscopy data. This was particularly true using thresholds based on the ASD canopy data and considering the combination of higher percentage of stressed plants detected (across the thresholds) and fewer false-positives.

Paulinia↗

USGS2018

A remote sensing-based model of tidal marsh aboveground carbon stocks for the conterminous United States

Remote sensing based maps of tidal marshes, both of their extents and carbon stocks, have the potential to play a key role in conducting greenhouse gas inventories and implementing climate mitigation policies. Our objective was to generate a single remote sensing model of tidal marsh aboveground biomass and carbon that represents nationally diverse tidal marshes within the conterminous United States (CONUS). We developed the first calibration-grade, national-scale dataset of aboveground tidal marsh biomass, species composition, and aboveground plant carbon content (%C) from six CONUS regions: Cape Cod, MA, Chesapeake Bay, MD, Everglades, FL, Mississippi Delta, LA, San Francisco Bay, CA, and Puget Sound, WA. Using the random forest machine learning algorithm, we tested whether imagery from multiple sensors, Sentinel-1 C-band synthetic aperture radar, Landsat, and the National Agriculture Imagery Program (NAIP), can improve model performance. The final model, driven by six Landsat vegetation indices and with the soil adjusted vegetation index as the most important (n = 409, RMSE = 310 g/m 2 , 10.3% normalized RMSE), successfully predicted biomass for a range of marsh plant functional types defined by height, leaf angle and growth form. Model results were improved by scaling field-measured biomass calibration data by NAIP-derived 30 m fraction green vegetation. With a mean plant carbon content of 44.1% (n = 1384, 95% C.I. = 43.99%–44.37%), we generated regional 30 m aboveground carbon density maps for estuarine and palustrine emergent tidal marshes as indicated by a modified NOAA Coastal Change Analysis Program map. We applied a multivariate delta method to calculate uncertainties in regional carbon densities and stocks that considered standard error in map area, mean biomass and mean %C. Louisiana palustrine emergent marshes had the highest C density (2.67 ± 0.004 Mg/ha) of all regions, while San Francisco Bay brackish/saline marshes had the highest C density of all estuarine emergent marshes (2.03 ± 0.004 Mg/ha). Estimated C stocks for predefined jurisdictional areas ranged from 1023 ± 39 Mg in the Nisqually National Wildlife Refuge in Washington to 507,761 ± 14,822 Mg in the Terrebonne and St. Mary Parishes in Louisiana. This modeling and data synthesis effort will allow for aboveground C stocks in tidal marshes to be included in the coastal wetland section of the U.S. National Greenhouse Gas Inventory. With the increased availability of free post-processed satellite data, we provide a tractable means of modeling tidal marsh aboveground biomass and carbon at the global extent as well.

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2021

Sentinel-2 and WorldView-3 atmospheric correction and signal normalization based on ground-truth spectroradiometric measurements

Remote sensing satellite Earth Observing Systems (EOS) provide a variety of products for monitoring Earth surface processes at varying spatial and spectral resolutions. Combining information from high and medium spatial resolution images is valuable for monitoring ground cover and vegetation status in cropland, grassland, forests, and other natural settings. However, coupling information from different EOS requires compensating for atmospheric and view angle effects before integrating comparable surface reflectance (SR) values. The objectives of this study were i) to assess how different atmospheric constituents affect the atmospheric correction results in Sentinel-2 and WorldView-3 imagery, ii) to establish a relationship with field spectra measurements, and iii) to develop an empirical approach to ensure that SR values extracted from different EOS can be normalized for use in monitoring vegetation and land cover status. We compared surface reflectance values derived from Sentinel-2 images corrected with Sen2Cor, MODTRAN or FLAASH atmospheric correction approaches for the visible-to-near infrared regions. Additionally, this information was compared to SR values extracted from WorldView-3 imagery acquired from the same dates and location (Central Spain) and corrected with MODTRAN and FLAASH approaches. Assessment of the atmospheric correction was conducted by comparing satellite image SR with ground-truth spectra acquired with a FieldSpec hand-held spectroradiometer. The results emphasized the importance of using common atmospheric parameters collected from ancillary data sources (i.e. MODIS Atmosphere & Land products) to ensure a reliable SR comparison. When compared to field-collected spectral data, SR from corrected Sentinel-2 push-broom imagery showed a reliable match (<4% difference in the visible bands and <0.52% difference in the near infrared bands). However, SR imagery from the pointable WorldView-3 instrument showed significant deviation, likely resulting from the effects of steep off-nadir acquisition angles (24.6° to 39.1°) combined with surface anisotropy. The magnitude and sign of the deviation in SR differed depending on the vegetation type, wavelength and sun-surface-sensor geometry. Therefore, it was necessary to account for angular effects to ensure reliable comparisons of imagery from the different EOS. In this study, an empirical angular correction approach was developed based on calibrating each WorldView-3 band against the ground-truth spectra. This correction allowed for the accurate signal normalization of WorldView-3 and Sentinel-2 imagery SR in the visible-to-near infrared regions.

ISPRS Journal of Photogrammetry and Remote Sensing↗

USGS2009

An improved procedure for detection and enumeration of walrus signatures in airborne thermal imagery

In recent years, application of remote sensing to marine mammal surveys has been a promising area of investigation for wildlife managers and researchers. In April 2006, the United States and Russia conducted an aerial survey of Pacific walrus (Odobenus rosmarus divergens) using thermal infrared sensors to detect groups of animals resting on pack ice in the Bering Sea. The goal of this survey was to estimate the size of the Pacific walrus population. An initial analysis of the U.S. data using previously-established methods resulted in lower detectability of walrus groups in the imagery and higher variability in calibration models than was expected based on pilot studies. This paper describes an improved procedure for detection and enumeration of walrus groups in airborne thermal imagery. Thermal images were first subdivided into smaller 200 x 200 pixel "tiles." We calculated three statistics to represent characteristics of walrus signatures from the temperature histogram for each the. Tiles that exhibited one or more of these characteristics were examined further to determine if walrus signatures were present. We used cluster analysis on tiles that contained walrus signatures to determine which pixels belonged to each group. We then calculated a thermal index value for each walrus group in the imagery and used generalized linear models to estimate detection functions (the probability of a group having a positive index value) and calibration functions (the size of a group as a function of its index value) based on counts from matched digital aerial photographs. The new method described here improved our ability to detect walrus groups at both 2 m and 4 m spatial resolution. In addition, the resulting calibration models have lower variance than the original method. We anticipate that the use of this new procedure will greatly improve the quality of the population estimate derived from these data. This procedure may also have broader applicability to thermal infrared surveys of other wildlife species. Published by Elsevier B.V.

International Journal of Applied Earth Observation↗

USGS2015

Evaluating the relationship between biomass, percent groundcover and remote sensing indices across six winter cover crop fields in Maryland, United States

Winter cover crops are an essential part of managing nutrient and sediment losses from agricultural lands. Cover crops lessen sedimentation by reducing erosion, and the accumulation of nitrogen in aboveground biomass results in reduced nutrient runoff. Winter cover crops are planted in the fall and are usually terminated in early spring, making them susceptible to senescence, frost burn, and leaf yellowing due to wintertime conditions. This study sought to determine to what extent remote sensing indices are capable of accurately estimating the percent groundcover and biomass of winter cover crops, and to analyze under what critical ranges these relationships are strong and under which conditions they break down. Cover crop growth on six fields planted to barley, rye, ryegrass, triticale or wheat was measured over the 2012–2013 winter growing season. Data collection included spectral reflectance measurements, aboveground biomass, and percent groundcover. Ten vegetation indices were evaluated using surface reflectance data from a 16-band CROPSCAN sensor. Restricting analysis to sampling dates before the onset of prolonged freezing temperatures and leaf yellowing resulted in increased estimation accuracy. There was a strong relationship between the normalized difference vegetation index (NDVI) and percent groundcover ( r 2 = 0.93) suggesting that date restrictions effectively eliminate yellowing vegetation from analysis. The triangular vegetation index (TVI) was most accurate in estimating high ranges of biomass ( r 2 = 0.86), while NDVI did not experience a clustering of values in the low and medium biomass ranges but saturated in the higher range (>1500 kg/ha). The results of this study show that accounting for index saturation, senescence, and frost burn on leaves can greatly increase the accuracy of estimates of percent groundcover and biomass for winter cover crops.

Maryland↗