Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Open File”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
USGS2000

Simulation of ground water flow in the Glaciofluvial, Saginaw, Parma-Bayport, and Marshall Aquifers, Central Lower Peninsula of Michigan

A steady-state finite difference model was developed to simulate ground-water flow in four regional aquifers in Michigan’s Lower Peninsula. The Glaciofluvial, Saginaw, Parma-Bayport, and Marshall aquifers were simulated as layers 1 through 4, respectively, in the model. Separately calculated vertical conductances input to the model were used to simulate the intervening Till/“Red Beds”, Saginaw, and Michigan confining units, respectively. The model domain was laterally bound by a continuous specifiedhead boundary, formed from Lakes Michigan, Huron, St. Clair, and Erie, together with the St. Clair and Detroit River connecting channels. The model was developed to quantify regional ground-water flow in the aquifer systems using independently determined recharge estimates. The flow model showed that groundwater heads and flows in the Glaciofluvial aquifer are controlled by local stream stages and discharges, resulting in localized flow cells accounting for 95-percent of the overall model water budget. Simulation of recharge to an unspecified water table also enabled the estimation of ground-water discharge to three Great Lakes. A computer diskette contains all MODFLOW and MODFLOWP input files, as well as digital model surfaces and several Fortran processing routines used to construct the surfaces. The diskette also provides the data used for calibration and sensitivity analysis.

Michigan↗
USGS2000

Geographic Information for Analysis of Highway Runoff-Quality Data on a National or Regional Scale in the Conterminous United States

Spatial data are important for interpretation of water-quality information on a regional or national scale. Geographic information systems (GIS) facilitate interpretation and integration of spatial data. The geographic information and data compiled for the conterminous United States during the National Highway Runoff Water-Quality Data and Methodology Synthesis project is described in this document, which also includes information on the structure, file types, and the geographic information in the data files. This 'geodata' directory contains two subdirectories, labeled 'gisdata' and 'gisimage.' The 'gisdata' directory contains ArcInfo coverages, ArcInfo export files, shapefiles (used in ArcView), Spatial Data Transfer Standard Topological Vector Profile format files, and meta files in subdirectories organized by file type. The 'gisimage' directory contains the GIS data in common image-file formats. The spatial geodata includes two rain-zone region maps and a map of national ecosystems originally published by the U.S. Environmental Protection Agency; regional estimates of mean annual streamflow, and water hardness published by the Federal Highway Administration; and mean monthly temperature, mean annual precipitation, and mean monthly snowfall modified from data published by the National Climatic Data Center and made available to the public by the Oregon Climate Service at Oregon State University. These GIS files were compiled for qualitative spatial analysis of available data on a national and(or) regional scale and therefore should be considered as qualitative representations, not precise geographic location information.

Open-File Report↗
USGS2006

Preliminary integrated geologic map databases for the United States: Digital data for the geology of southeast Alaska

The growth in the use of Geographic Information Systems (GIS) has highlighted the need for digital geologic maps that have been attributed with information about age and lithology. Such maps can be conveniently used to generate derivative maps for manifold special purposes such as mineral-resource assessment, metallogenic studies, tectonic studies, and environmental research. This report is part of a series of integrated geologic map databases that cover the entire United States. Three national-scale geologic maps that portray most or all of the United States already exist; for the conterminous U.S., King and Beikman (1974a,b) compiled a map at a scale of 1:2,500,000, Beikman (1980) compiled a map for Alaska at 1:2,500,000 scale, and for the entire U.S., Reed and others (2005a,b) compiled a map at a scale of 1:5,000,000. A digital version of the King and Beikman map was published by Schruben and others (1994). Reed and Bush (2004) produced a digital version of the Reed and others (2005a) map for the conterminous U.S. The present series of maps is intended to provide the next step in increased detail. State geologic maps that range in scale from 1:100,000 to 1:1,000,000 are available for most of the country, and digital versions of these state maps are the basis of this product. The digital geologic maps presented here are in a standardized format as ARC/INFO export files and as ArcView shape files. Data tables that relate the map units to detailed lithologic and age information accompany these GIS files. The map is delivered as a set of 1:250,000-scale quadrangle files. To the best of our ability, these quadrangle files are edge-matched with respect to geology. When the maps are merged, the combined attribute tables can be used directly with the merged maps to make derivative maps.

Alaska↗
USGS2010

USGS Cold-Water Coral Geographic Database-Gulf of Mexico and western North Atlantic Ocean, version 1.0

The USGS Cold-Water Coral Geographic Database (CoWCoG) provides a tool for researchers and managers interested in studying, protecting, and/or utilizing cold-water coral habitats in the Gulf of Mexico and western North Atlantic Ocean. The database makes information about the locations and taxonomy of cold-water corals available to the public in an easy-to-access form while preserving the scientific integrity of the data. The database includes over 1700 entries, mostly from published scientific literature, museum collections, and other databases. The CoWCoG database is easy to search in a variety of ways, and data can be quickly displayed in table form and on a map by using only the software included with this publication. Subsets of the database can be selected on the basis of geographic location, taxonomy, or other criteria and exported to one of several available file formats. Future versions of the database are being planned to cover a larger geographic area and additional taxa.

Open-File Report↗
USGS2009

Volcanogenic Massive Sulfide Deposits of the World - Database and Grade and Tonnage Models

Grade and tonnage models are useful in quantitative mineral-resource assessments. The models and database presented in this report are an update of earlier publications about volcanogenic massive sulfide (VMS) deposits. These VMS deposits include what were formerly classified as kuroko, Cyprus, and Besshi deposits. The update was necessary because of new information about some deposits, changes in information in some deposits, such as grades, tonnages, or ages, revised locations of some deposits, and reclassification of subtypes. In this report we have added new VMS deposits and removed a few incorrectly classified deposits. This global compilation of VMS deposits contains 1,090 deposits; however, it was not our intent to include every known deposit in the world. The data was recently used for mineral-deposit density models (Mosier and others, 2007; Singer, 2008). In this paper, 867 deposits were used to construct revised grade and tonnage models. Our new models are based on a reclassification of deposits based on host lithologies: Felsic, Bimodal-Mafic, and Mafic volcanogenic massive sulfide deposits. Mineral-deposit models are important in exploration planning and quantitative resource assessments for two reasons: (1) grades and tonnages among deposit types vary significantly, and (2) deposits of different types occur in distinct geologic settings that can be identified from geologic maps. Mineral-deposit models combine the diverse geoscience information on geology, mineral occurrences, geophysics, and geochemistry used in resource assessments and mineral exploration. Globally based deposit models allow recognition of important features and demonstrate how common different features are. Well-designed deposit models allow geologists to deduce possible mineral-deposit types in a given geologic environment and economists to determine the possible economic viability of these resources. Thus, mineral-deposit models play a central role in presenting geoscience information in a useful form to policy makers. The foundation of mineral-deposit models is information about known deposits. The purpose of this publication is to present the latest geologic information and newly developed grade and tonnage models for VMS deposits in digital form. This publication contains computer files with information on VMS deposits from around the world. It also presents new grade and tonnage models for three subtypes of VMS deposits and a text file allowing locations of all deposits to be plotted in geographic information system (GIS) programs. The data are presented in FileMaker Pro and text files to make the information available to a wider audience. The value of this information and any derived analyses depends critically on the consistent manner of data gathering. For this reason, we first discuss the rules used in this compilation. Next, we provide new grade and tonnage models and analysis of the information in the file. Finally, the fields of the data file are explained. Appendix A gives the summary statistics for the new grade-tonnage models and Appendix B displays the country codes used in the database.

Open-File Report↗
USGS2018

A guide to processing bat acoustic data for the North American Bat Monitoring Program (NABat)

The North American Bat Monitoring Program (NABat) aims to improve the state of conservation science for all species of bats shared by the United States, Canada, and Mexico. To accomplish this goal, NABat offers guidance and standardized protocols for acoustic monitoring of bats. In this document, “A Guide to Processing Bat Acoustic Data for the North American Bat Monitoring Program (NABat),” we provide general recommendations and specific workflows for the process of identifying bat species from acoustic files recorded using the NABat stationary point and mobile transect acoustic monitoring protocols.

Open-File Report↗
USGS1996

Documentation of model input and output values for simulation of pumping effects in Paradise Valley, a basin tributary to the Humboldt River, Humboldt County, Nevada

Documentation is provided of model input and sample output used in a previous report for analysis of ground-water flow and simulated pumping scenarios in Paradise Valley, Humboldt County, Nevada.Documentation includes files containing input values and listings of sample output. The files, in American International Standard Code for Information Interchange (ASCII) or binary format, are compressed and put on a 3-1/2-inch diskette. The decompressed files require approximately 8.4 megabytes of disk space on an International Business Machine (IBM)- compatible microcomputer using the MicroSoft Disk Operating System (MS-DOS) operating system version 5.0 or greater.

Open-File Report↗
USGS2006

Alaska resource data file: Point Lay quadrangle, Alaska

This report gives descriptions of the mineral occurrences in the Point Lay 1:250,000-scale quadrangle, Alaska. The data presented here are maintained as part of a statewide database on mines, prospects and mineral occurrences throughout Alaska.

Alaska↗
USGS2006

Alaska resource data file, Noatak quadrangle

This report gives descriptions of the mineral occurrences in the Noatak 1:250,000-scale quadrangle, Alaska. The data presented here are maintained as part of a statewide database on mines, prospects and mineral occurrences throughout Alaska.

Alaska↗
USGS2010

eMODIS: A User-Friendly Data Source

The U.S. Geological Survey's (USGS) Earth Resources Observation and Science (EROS) Center is generating a suite of products called 'eMODIS' based on Moderate Resolution Imaging Spectroradiometer (MODIS) data acquired by the National Aeronautics and Space Administration's (NASA) Earth Observing System (EOS). With a more frequent repeat cycle than Landsat and higher spatial resolutions than the Advanced Very High Resolution Spectroradiometer (AVHRR), MODIS is well suited for vegetation studies. For operational monitoring, however, the benefits of MODIS are counteracted by usability issues with the standard map projection, file format, composite interval, high-latitude 'bow-tie' effects, and production latency. eMODIS responds to a community-specific need for alternatively packaged MODIS data, addressing each of these factors for real-time monitoring and historical trend analysis. eMODIS processes calibrated radiance data (level-1B) acquired by the MODIS sensors on the EOS Terra and Aqua satellites by combining MODIS Land Science Collection 5 Atmospherically Corrected Surface Reflectance production code and USGS EROS MODIS Direct Broadcast System (DBS) software to create surface reflectance and Normalized Difference Vegetation Index (NDVI) products. eMODIS is produced over the continental United States and over Alaska extending into Canada to cover the Yukon River Basin. The 250-meter (m), 500-m, and 1,000-m products are delivered in Geostationary Earth Orbit Tagged Image File Format (Geo- TIFF) and composited in 7-day intervals. eMODIS composites are projected to non-Sinusoidal mapping grids that best suit the geography in their areas of application (see eMODIS Product Description below). For eMODIS products generated over the continental United States (eMODIS CONUS), the Terra (from 2000) and Aqua (from 2002) records are available and continue through present time. eMODIS CONUS also is generated in an expedited process that delivers a 7-day rolling composite, created daily with the most recent 7 days of acquisition, to users monitoring real-time vegetation conditions. eMODIS Alaska is not part of expedited processing, but does cover the Terra mission life (2000-present). A simple file transfer protocol (FTP) distribution site currently is enabled on the Internet for direct download of eMODIS products (ftp://emodisftp.cr.usgs.gov/eMODIS), with plans to expand into an interactive portal environment.

Open-File Report↗
USGS2012

Summary of data from onsite and laboratory analyses of surface water and marsh porewater from South Florida Water Management District Water Conservation Areas, the Everglades, South Florida, March 1995

This report presents results of chemical analysis for samples collected during March, 1995, as part of a study to quantify the interaction of aquatic organic material (referred to here as dissolved organic carbon with dissolved metal ions). The work was done in conjunction with the South Florida Water Management District, the U.S. Environmental Protection Agency, the U.S. Geological Survey South Florida Ecosystems Initiative, and the South Florida National Water Quality Assessment Study Unit. Samples were collected from surface canals and from marsh sites. Results are based on onsite and laboratory measurements for 27 samples collected at 10 locations. The data file contains sample description, dissolved organic carbon concentration and specific ultraviolet absorbance, and additional analytical data for samples collected at several sites in the Water Conservation Areas, the Everglades, south Florida.

Florida↗
USGS1997

Digital geologic map database of the Nevada Test Site area, Nevada

Forty years of geologic investigations at the Nevada Test Site (NTS) have been digitized. These data include all geologic information that: (1) has been collected, and (2) can be represented on a map within the map borders at the map scale is included in the map digital coverages. The following coverages are included with this dataset: Coverage Type Description geolpoly Polygon Geologic outcrops geolflts line Fault traces geolatts Point Bedding attitudes, etc. geolcald line Caldera boundaries geollins line Interpreted lineaments geolmeta line Metamorphic gradients The above coverages are attributed with numeric values and interpreted information. The entity files documented below show the data associated with each coverage.

Nevada↗
USGS2000

Regional seismic lines reprocessed using post-stack processing techniques: National Petroleum Reserve, Alaska

This CD-ROM contains stacked, migrated, 2-Dimensional seismic reflection data and associated support information for 22 regional seismic lines (3,470 line-miles) recorded in the National Petroleum Reserve – Alaska (NPRA) from 1974 through 1981. Together, these lines constitute about one-quarter of the seismic data collected as part of the Federal Government’s program to evaluate the petroleum potential of the Reserve. The regional lines, which form a grid covering the entire NPRA, were created by combining various individual lines recorded in different years using different recording parameters. These data were reprocessed by the USGS using modern, post-stack processing techniques, to create a data set suitable for interpretation on interactive seismic interpretation computer workstations. Reprocessing was done in support of ongoing petroleum resource studies by the USGS Energy Program. The CD-ROM contains the following files: 1) 22 files containing the digital seismic data in standard, SEG-Y format; 2) 1 file containing navigation data for the 22 lines in standard SEG-P1 format; 3) 22 small scale graphic images of each seismic line in Adobe Acrobat ® PDF format; 4) a graphic image of the location map, generated from the navigation file, with hyperlinks to the graphic images of the seismic lines; 5) an ASCII text file with cross-reference information for relating the sequential trace numbers on each regional line to the line number and shotpoint number of the original component lines; and 6) an explanation of the processing used to create the final seismic sections (this document). The SEG-Y format seismic files and SEG-P1 format navigation file contain all the information necessary for loading the data onto a seismic interpretation workstation.

Alaska↗
USGS2016

QRev—Software for computation and quality assurance of acoustic doppler current profiler moving-boat streamflow measurements—User’s manual for version 2.8

The software program, QRev computes the discharge from moving-boat acoustic Doppler current profiler measurements using data collected with any of the Teledyne RD Instrument or SonTek bottom tracking acoustic Doppler current profilers. The computation of discharge is independent of the manufacturer of the acoustic Doppler current profiler because QRev applies consistent algorithms independent of the data source. In addition, QRev automates filtering and quality checking of the collected data and provides feedback to the user of potential quality issues with the measurement. Various statistics and characteristics of the measurement, in addition to a simple uncertainty assessment are provided to the user to assist them in properly rating the measurement. QRev saves an extensible markup language file that can be imported into databases or electronic field notes software. The user interacts with QRev through a tablet-friendly graphical user interface. This report is the manual for version 2.8 of QRev.

Open-File Report↗
USGS1979

Mid-Atlantic Single-channel seismic reflection profiles collected over the Baltimore Canyon Trough area

Available are 377km of mini sparker data collected during the September 1977 cruise of the research vessel Annandale over the Baltimore Canyon Trough area. The prime purpose of the cruise was to obtain vibracores at selected locations across the Continental Shelf. The samples and seismic profiles were collected to study the origin and possible geologic hazards of a broad sedimentary terrace that lies just south of the Hudson Channel. Information about the cruise can be obtained from Dr. Harley J. Knebel, U.S. Geological Survey, Woods Hole, Massachusetts 02543. The original records are on file at the U.S. Geological Survey's Data Library in Woods Hole. Microfilm copies of the seismic profiles may be purchased from the National Geophysical and Solar Terrestrial Data Center (NGSDC), in Boulder, Colorado 80302.

Open-File Report↗
USGS2014

Temporal changes in lithology and radiochemistry from the back-barrier environments along the Chandeleur Islands, Louisiana: March 2012-July 2013

Scientists from the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center conducted a time-series collection of shallow sediment cores from the back-barrier environments along the Chandeleur Islands, Louisiana from March 2012 through July 2013. The sampling efforts were part of a larger USGS study to evaluate effects on the geomorphology of the Chandeleur Islands following the construction of an artificial sand berm to reduce oil transport onto federally managed lands. The objective of this study was to evaluate the response of the back-barrier tidal and wetland environments to the berm. This report serves as an archive for sedimentological, radiochemical, and microbiological data derived from the sediment cores. Data are available for a time-series of four sampling periods: March 2012; July 2012; September 2012; and July 2013. Downloadable data are available as Excel spreadsheets and as JPEG files. Additional files include: ArcGIS shapefiles of the sampling sites, detailed results of sediment grain size analyses, and formal Federal Geographic Data Committee metadata.

Louisiana↗
USGS2016

A seasonal comparison of surface sediment characteristics in Chincoteague Bay, Maryland and Virginia, USA

Scientists from the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center conducted a seasonal collection of surficial sediments from Chincoteague Bay and Tom's Cove, between Assateague Island and the Delmarva Peninsula in late March/early April 2014 and October 2014. The sampling efforts were part of a larger U.S. Geological Survey study to assess the effects of storm events on sediment distribution in back-barrier environments of the United States. By sampling during the spring and fall, a more complete understanding of seasonal variability in the area can help determine baseline conditions. The objective of this study was to characterize the sediments of Chincoteague Bay in order to create baseline conditions to incorporate with the hydrodynamic and sediment transport models used to evaluate pre- and post-storm change and compare with future field measurements. This report is an archive for sedimentological data derived from the surface sediment of Chincoteague Bay. Data are available for the spring (March/April 2014) and fall (October 2014) samples collected. Downloadable data are provided as Excel spreadsheets and as JPEG files. Additional files include ArcGIS shapefiles of the sampling sites, detailed results of sediment grain-size analyses, and formal Federal Geographic Data Committee metadata (data downloads).

Maryland, Virginia↗
USGS2018

Interactive tool to estimate groundwater elevations in central and eastern North Dakota

This report describes an interactive tool (NDakGWtool) in which a statistical model is developed using locally weighted regression to estimate monthly mean groundwater elevations for a specified latitude and longitude, referred to as the “user-specified location.” For each user-specified location, seven models are developed for each month from April through October. Localized, high spatial-resolution maps of estimated monthly mean groundwater surface elevations are produced from the models. The tool was evaluated for glacial drift aquifers of the 32-county study area in central and eastern North Dakota. Although groundwater elevations from 1960 to 2017 were available to develop the tool, groundwater elevations from 1995 to 2015 were used for model testing and development of the model domain. There are 413 grid cells of 0.1-degree latitude by 0.1-degree longitude size in the model domain, and the tool produces maps of estimated monthly mean groundwater surface elevations for the cell containing the user-specified location. Additionally, the NDakGWtool produces maps of estimated groundwater depth below land surface and ArcGIS files of estimated groundwater surface elevations and groundwater depth below land surface. The tool is composed of four main components: data input, statistical model, output, and user-interactive process.

North Dakota↗