SEARCH · Geology Reports

Results for “Holocene”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

USGS1991

The Marina District, San Francisco, California: Geology, history, and earthquake effects

A northwest-trending valley in the bedrock surface is buried by firm Pleistocene bay clay, a dense Pleistocene sand layer, soft Holocene bay sediments, loose to dense Holocene beach and dune sands, and artificial fill that have an aggregate maximum thickness of about 90 m (300 ft). Artificial filling of a cove at the site of The Marina District proceeded gradually from the late 1860s to 1912, when major hydraulic filling was done for the Panama-Pacific International Exposition. The remains of thousands of piles driven for the Exposition very probably still exist and have had unknown effects on long-term ground settlement and earthquake-related ground displacements. Intensity maps of the 1906 earthquake, and seismic recordings and severe building damage in 1989, reported by others, indicate that ground motion was amplified on both natural and artificial ground. This suggests that the configuration of the bedrock surface and the location and thickness of various clay and sand deposits underlying the fill had an important effect on the shaking. However, most of the settlement and liquefaction and the damage to pipelines, building foundations, streets, side-walks, and curbs occurred in areas of artificial fill consisting mainly of loose sand.

California↗

USGS1997

Geomorphic response to tectonically-induced ground deformation in the Wabash Valley

Numerous low- to moderate-intensity earthquakes have been recorded in a zone of diffuse modern seismicity in southwest Indiana, southeast Illinois, and northernmost Kentucky. Structural elements within the zone include the Wabash Valley Fault System, the LaSalle Anticlinal Belt in western Illinois, and the Rough Creek-Shawneetown Fault System in northern Kentucky. The presence of seismically-induced liquefaction features in the near-surface alluvial sediments in the region indicates that strong ground motion has occurred in the recent geological past, but because the glacial and alluvial sediments in the Wabash Valley appear to be otherwise undisturbed, post-Paleozoic ground deformation resulting from movement on these structural elements has not yet been documented. Morphometric analysis of the land surface, detailed mapping of geomorphic elements in the valley, reconnaissance drilling of the Holocene and Pleistocene alluvium, and structural analysis of the bedrock underlying the valley were used to determine whether the geomorphology of the valley and the patterns of alluviation of the Wabash River were affected by surface deformation associated with the seismic zone during the late Pleistocene and Holocene. Among the observed features in the valley that can be attributed to deformation are: (1) tilting of the modern land surface to the west, (2) preferred channel migration toward the west side of the valley, with concomitant impact on patterns of soil development and sedimentation rate, (3) a convex longitudinal profile of the Wabash River where it crosses the LaSalle Anticlinal Belt, and (4) increased incision of the river into its floodplain downstream from the anticlinal belt.

Illinois, Indiana↗

USGS2000

Preliminary report on the 16 October 1999 M 7.1 Hector mine, California, earthquake

The M w 7.1 Hector Mine, California, earthquake occurred at 9:46 GMT on 16 October 1999. The event caused minimal damage because it was located in a remote, sparsely populated part of the Mojave Desert, approximately 47 miles east-southeast of Barstow, with epicentral coordinates 34.59°N 116.27°W and a hypocentral depth of 5 ± 3 km. Twelve foreshocks, M 1.9-3.8, preceded the mainshock during the previous twelve hours. All of these events were located close to the hypocenter of the mainshock. The Hector Mine earthquake occurred within the Eastern California Shear Zone (ECSZ). By virtue of its remote location, the societal impact of the Hector Mine earthquake was, fortunately, minimal in spite of the event's appreciable size. The ECSZ is characterized by high seismicity, a high tectonic strain rate, and a broad, distributed zone of north-northwest-trending faults (ECSZ; Figure 1 ; Dokka and Travis, 1990 ; Sauber et al., 1986 ; Sauber et al., 1994 ; Sieh et al., 1993 ). Data regarding the slip rates of faults within the ECSZ suggest that on the order of 15% of the Pacific-North American plate motion occurs along this zone ( Sauber et al., 1986 ; Wesnousky, 1986 ). Most of the faults in the ECSZ have low slip rates and long repeat times for major earthquakes, on the order of several thousands to tens of thousands of years. The occurrence of the Hector Mine earthquake within seven years and only about 30 km east of the 1992 M w 7.3 Landers earthquake suggests that the closely spaced surface faults in the ECSZ are mechanically related. The Hector Mine event involved rupture on two previously mapped fault zones—the Bullion Fault and an unnamed, more northerly-trending fault that is informally referred to in this paper as the Lavic Lake Fault (Dibblee, 1966 , 1967a , b ). Traces of the Bullion Fault exhibit evidence of Holocene displacement and were zoned as active in 1988 under California's Mquist-Priolo Earthquake Fault Zoning Act ( Hart and Bryant, 1997 ). The pattern of rupture along more than one named fault was also observed from the 1992 Landers earthquake ( Hauksson et al., 1993 ; Sieh et al., 1994). Much of the fault zone that produced the Hector Mine earthquake had been buried by relatively young stream deposits, and the fault scarps in bedrock have a subdued morphology. It appears that these faults have not experienced significant offset for perhaps 10,000 years or more ( Hart, 1987 ). Planned future investigations will refine the age of the last event on these faults. The portion of the Lavic Lake Fault that ruptured between the northern end of the Bullion Mountains and Lavic Lake had not previously been mapped. However, our field investigations have identified ancient, subdued fault scarps along portions of the 1999 rupture zone in this area. It thus appears that the entire segment of the Lavic Lake Fault that was involved in the 1999 event had ruptured in the past. As is typical for most faults within the Eastern California Shear Zone, the rate of movement along the Lavic Lake Fault may be quite slow (<1 mm/yr) and should produce earthquakes only infrequently. This event is a reminder that faults that have ruptured in late Quaternary time, but that lack evidence of Holocene displacement, can still produce earthquakes in this low-slip-rate tectonic setting. Additionally, the Hector Mine earthquake is noteworthy for a couple of other reasons. First, it clearly produced triggered seismicity over much of southern California, from the rupture zone toward the south-southwest in particular. Second, as we will discuss, the event may provide new data and insight into recently developed paradigms concerning earthquake interactions and the role of static stress changes. Questions such as these will, of course, be the subject of extensive detailed analyses in years to come. Fortunately, the Hector Mine sequence will provide one of the best data sets obtained to date for a significant earthquake in the United States. Because it occurred when major upgrades to both the regional seismic network (TriNet) and the regional geodetic network (SCIGN) were well underway, the Earth science community will have abundant high-quality data with which to explore the important and interesting questions that have been raised. In this paper, we present and discuss the basic data and preliminary results from the Hector Mine earthquake.

California↗

USGS2015

Fluvial-aeolian interactions in sediment routing and sedimentary signal buffering: an example from the Indus Basin and Thar Desert

Sediment production and its subsequent preservation in the marine stratigraphic record offshore of large rivers are linked by complex sediment-transfer systems. To interpret the stratigraphic record it is critical to understand how environmental signals transfer from sedimentary source regions to depositional sinks, and in particular to understand the role of buffering in obscuring climatic or tectonic signals. In dryland regions, signal buffering can include sediment cycling through linked fluvial and eolian systems. We investigate sediment-routing connectivity between the Indus River and the Thar Desert, where fluvial and eolian systems exchanged sediment over large spatial scales (hundreds of kilometers). Summer monsoon winds recycle sediment from the lower Indus River and delta northeastward, i.e., downwind and upstream, into the desert. Far-field eolian recycling of Indus sediment is important enough to control sediment provenance at the downwind end of the desert substantially, although the proportion of Indus sediment of various ages varies regionally within the desert; dune sands in the northwestern Thar Desert resemble the Late Holocene–Recent Indus delta, requiring short transport and reworking times. On smaller spatial scales (1–10 m) along fluvial channels in the northern Thar Desert, there is also stratigraphic evidence of fluvial and eolian sediment reworking from local rivers. In terms of sediment volume, we estimate that the Thar Desert could be a more substantial sedimentary store than all other known buffer regions in the Indus basin combined. Thus, since the mid-Holocene, when the desert expanded as the summer monsoon rainfall decreased, fluvial-eolian recycling has been an important but little recognized process buffering sediment flux to the ocean. Similar fluvial-eolian connectivity likely also affects sediment routing and signal transfer in other dryland regions globally.

Indus Basin, Thar Desert↗

USGS2009

Review of the geologic history of the Pontchartrain Basin, northern Gulf of Mexico

The Pontchartrain Basin extends over 44,000 km² from northern Mississippi to the Gulf of Mexico and includes one of the largest and most important estuarine systems in the United States. The basin supports a variety of environments, from woodlands in the north to wetlands in the south, and a growing socioeconomic infrastructure that has led to rapid development of the southern half of the basin over the past two centuries. To properly administer this infrastructure, managers need to understand the complex geologic framework of the basin and how it will respond to continued sea-level rise, variable rates and magnitudes of land subsidence, and human alteration of the landscape. This article summarizes the body of work that describes the regional evolution and stratigraphic architecture of the Pontchartrain Basin. The northern two-thirds of the basin is underlain by a stratigraphy of undifferentiated sands and clays deposited throughout the Plio-Pleistocene by glacially influenced rivers. These deposits were weathered and incised by rivers during sea-level low stands, forming a series of terraces that increase with age from south to north. The southern third of the basin is composed of estuaries formed during the Holocene, while shoreline processes created a series of sandy barriers that restricted communication to the Gulf of Mexico. The Mississippi River completed the geologic development of the basin by building a sequence of subdelta lobes along this southern margin over the past 5000 years, further sealing it from the open Gulf of Mexico. Presently, the modern Mississippi River bypasses the estuarine environment and only contributes sediments during flood events when the river overtops the levee system. Sea-level rise, subsidence within the Holocene delta-plain deposits, and movement along numerous fault systems are the active natural processes that continue to affect basin geomorphology.

Louisiana, Mississippi↗

USGS1997

Regional landslide-hazard evaluation using landslide slopes, Western Wasatch County, Utah

Landsliding has historically been one of the most damaging geologic hazards in western Wasatch County, Utah. Accordingly, we mapped and analyzed landslides (slumps and debris slides) in the area to provide an empirical basis for regional landslide-hazard evaluation. The 336 landslides in the 250-sq-mi (650-km 2 ) area involve 20 geologic units, including Mississippian- to Quaternary-aged rock and unconsolidated deposits. Landsliding in western Wasatch County is characterized by a strong correlation between geologic material and landslide-slope inclination. From a simple statistical analysis of overall slope inclinations of late Holocene landslides, we determined “critical” slope inclinations above which late Holocene landsliding has typically occurred and used these as the primary basis for defining relative landslide hazard. The critical slopes vary for individual geologic units and range from 15 to 50 percent (9°–27°). The critical slope values and landslide locations were used in conjunction with geologic and slope maps to construct qualitative landslide-susceptibility maps for use by county planners. The maps delineate areas of low, moderate, and high relative hazard and indicate where studies should be completed prior to development to evaluate site-specific slope-stability conditions. Critical slopes as determined in this study provide a consistent empirical reference that is useful for evaluating relative landslide hazard and guiding land-use-planning decisions in large, geologically complex areas.

Utah↗

USGS1996

Differentiating climatic and successional influences on long-term development of a marsh

Comparison of long—term records of local wetland vegetation dynamics with regional, climate—forced terrestrial vegetation changes can be used to differentiate the rates and effects of autogenic successional processes and allogenic environmental change on wetland vegetation dynamics. We studied Holocene plant macrofossil and pollen sequences from Portage Marsh, a shallow, 18—ha marsh in northeastern Indiana. Between 10 000 and 5700 yr BP the basin was occupied by a shallow, open lake, while upland vegetation consisted of mesic forests of Pinus, Quercus, Ulmus, and Carya. At 5700 yr BP the open lake was replaced rapidly by a shallow marsh, while simultaneously Quercus savanna developed on the surrounding uplands. The marsh was characterized by periodic drawdowns, and the uplands by periodic fires. Species composition of the marsh underwent further changes between 3000 and 2000 yr BP. Upland pollen spectra at Portage Marsh and other sites in the region shifted towards more mesic vegetation during that period. The consistency and temporal correspondence between the changes in upland vegetation and marsh vegetation indicate that the major vegetational changes in the marsh during the Holocene resulted from hydrologic changes forced by regional climate change. Progressive shallowing of the basin by autogenic accumulation of organic sediment constrained vegetational responses to climate change but did not serve as the direct mechanism of change.

Ecology↗

USGS2001

Quaternary geology, Cold Bay and False Pass quadrangles, Alaska Peninsula

Recent mapping and interpretation of Quaternary geologic features has improved our understanding of the interaction between volcanic, glacial, and tectonic activity in the Cold Bay and False Pass 1:250,000-scale quadrangles on the Alaska Peninsula. The glacial and volcanic record of the map area strongly suggests that continental-shelf glaciations and two massive volcanic centers were the dominant controls over landscape development during Pleistocene time. Ancestral Morzhovoi and Emmons Volcanoes were major impediments to flow of shelf glaciers during much of the Pleistocene. Our mapping suggests that the area around Emmons Volcano may have also been an important source area for glaciers during this period. Our data further indicate that Frosty Volcano developed late in the Pleistocene, having had no apparent impact on early Brooks Lake glacial advances but serving as a source area for later glacial advances during late Brooks Lake time. We also believe that major Holocene eruptions of Frosty Volcano have yielded multiple debris and ash flows resulting in the construction of a new south summit cone that filled an earlier crater. Frosty Volcano was the source area for multiple Holocene glacial advances, and its flanks preserve the best record of Neoglacial activity in the map area.

Alaska↗

USGS2009

Mineral Resource Assessment of Marine Sand Resources in Cape- and Ridge-Associated Marine Sand Deposits in Three Tracts, New York and New Jersey, United States Atlantic Continental Shelf

Demand is growing in the United States and worldwide for information about the geology of offshore continental shelf regions, the character of the seafloor, and sediments comprising the seafloor and subbottom. Interest in locating sand bodies or high quality deposits that have potential as sources for beach nourishment and ecosystem restoration is especially great in some regions of the country. The Atlantic coast, particularly New York and New Jersey, has been the focus of these studies for the past 40 years with widely varying results. This study is the first attempt at applying probability statistics to modeling Holocene-age cape-and ridge-associated sand deposits and thus focuses on distinct sand body morphology. This modeling technique may have application for other continental shelf regions that have similar geologic character and late Quaternary sea-level transgression history. An estimated volume of 3.9 billion m3 of marine sand resources is predicted in the cape-and ridge-associated marine sand deposits in three representative regions or tracts on the continental shelf offshore of New York and New Jersey. These estimates are taken from probabilistic distributions of sand resources and are produced using deposit models and Monte Carlo Simulation (MCS) techniques. The estimated sand resources presented here are for only three tracts as described below and for Holocene age sand resources contained in cape-and ridge-associated marine sand deposit types within this area. Other areas may qualify as tracts for this deposit type and other deposit types and geologic ages (for example, paleo-stream channels, blanket and outwash deposits, ebb-tide shoals, and lower sea level-stand deltas), which are present on the New Jersey and New York continental shelf area but are not delineated and modeled in this initial evaluation. Admittedly, only a portion of these probable sand resources will ultimately be available and suitable for production, dependent largely on geographic, economic, preemptive use, environmental, geologic and political factors. In addition, offshore sand resources should only be considered if the area is seaward of the active zone of significant nearshore sediment transport, about 10 to 12 m in depth, and in sufficiently shallow water so that sand can be extracted within U.S. dredging equipment limits, currently about 40 m in depth. If the material is to be used for beach nourishment, material must be of an appropriate sediment texture and character (grain size, sorting, shape, and color) to match the native beach and have mineralogical properties important to its use. Extraction of sand can disturb or alter the benthic habitat and seafloor ecology, so these factors and other site-specific effects will need to be evaluated for any intended use. These and other factors are not considered in this report but can be expected to reduce the total net volume of sand resources available for production. The purpose of this report is to describe and present results from a probabilistic mineral modeling technique previously applied to onshore mineral resources. This modeling and assessment procedure is being used for the first time to assess and estimate offshore aggregate resources; this study is part of the U.S. Geological Survey (USGS) Marine Aggregates Resources and Processes Project (http://woodshole.er.usgs.gov/project-pages/aggregates/).

Bulletin↗

USGS1991

Cores from marine geologic features in the western Gulf of Maine

Submerged geologic features located in the western Gulf of Maine between Cape Ann, Massachusetts and New Hampshire (fig. 1), were identified from high-resolution seismic-reflection data collected between 1979 and 1980. The features include the following. (1) A pair of end morained formed during the retreat of the Laurentide Ice Sheet from the Gulf of Maine (Oldale, 1985a). (2) A barrier spit and lagoon complex and (3) a paleodelta, both of which formed during a late Wisconsinan to early Holocene low relative sea-level stand (Oldale and others, 1983; Oldale, 1985b). (4) A wave-cut unconformity that was eroded as the sea transgressed to its present position. (5) A surficial sand depost that formed atop the unconformity in middle Holocene time. Vibracores (fig. 2) were taken in 1984 to corroborate the interpretations from the seismic data, to determine the sedimentary texture and structure of the features, to identify the nature of the unconformity, and to obtain material for 14 C dating,

Maine↗

USGS2002

Hydrostructural maps of the Death Valley regional flow system, Nevada and California

The locations of principal faults and structural zones that may influence ground-water flow were compiled in support of a three-dimensional ground-water model for the Death Valley regional flow system (DVRFS), which covers 80,000 square km in southwestern Nevada and southeastern California. Faults include Neogene extensional and strike-slip faults and pre-Tertiary thrust faults. Emphasis was given to characteristics of faults and deformed zones that may have a high potential for influencing hydraulic conductivity. These include: (1) faulting that results in the juxtaposition of stratigraphic units with contrasting hydrologic properties, which may cause ground-water discharge and other perturbations in the flow system; (2) special physical characteristics of the fault zones, such as brecciation and fracturing, that may cause specific parts of the zone to act either as conduits or as barriers to fluid flow; (3) the presence of a variety of lithologies whose physical and deformational characteristics may serve to impede or enhance flow in fault zones; (4) orientation of a fault with respect to the present-day stress field, possibly influencing hydraulic conductivity along the fault zone; and (5) faults that have been active in late Pleistocene or Holocene time and areas of contemporary seismicity, which may be associated with enhanced permeabilities. The faults shown on maps A and B are largely from Workman and others (in press), and fit one or more of the following criteria: (1) faults that are more than 10 km in map length; (2) faults with more than 500 m of displacement; and (3) faults in sets that define a significant structural fabric that characterizes a particular domain of the DVRFS. The following fault types are shown: Neogene normal, Neogene strike-slip, Neogene low-angle normal, pre-Tertiary thrust, and structural boundaries of Miocene calderas. We have highlighted faults that have late Pleistocene to Holocene displacement (Piety, 1996). Areas of thick Neogene basin-fill deposits (thicknesses 1-2 km, 2-3 km, and >3 km) are shown on map A, based on gravity anomalies and depth-to-basement modeling by Blakely and others (1999). We have interpreted the positions of faults in the subsurface, generally following the interpretations of Blakely and others (1999). Where geophysical constraints are not present, the faults beneath late Tertiary and Quaternary cover have been extended based on geologic reasoning. Nearly all of these concealed faults are shown with continuous solid lines on maps A and B, in order to provide continuous structures for incorporation into the hydrogeologic framework model (HFM). Map A also shows the potentiometric surface, regional springs (25-35 degrees Celsius, D'Agnese and others, 1997), and cold springs (Turner and others, 1996).

Nevada;California↗

USGS2003

Geologic map of the Rio Puerco quadrangle, Bernalillo and Valencia Counties, New Mexico

The Rio Puerco quadrangle is located southwest of Albuquerque in central New Mexico and covers part of the western part of the Isleta Reservation. The U.S. Geological Survey, the New Mexico Bureau of Geology and Mineral Resources, and the University of New Mexico have conducted geologic mapping on the Isleta Reservation and vicinity as part of the Middle Rio Grande Basin Project. The map area contains surficial deposits, calcic soils, fluvial deposits of the Rio Puerco, deposits of the Santa Fe Group, and three volcanic fields. The area is characterized by predominantly north-trending normal faults with generally down-to-the-east movement. Post-Santa Fe Group deposits are composed of surficial deposits (Pleistocene-Holocene) and fluvial deposits of the Rio Puerco (Pleistocene-Holocene). The surficial deposits are divided into eolian, alluvial, colluvial, and landslide deposits. The fluvial deposits of the Rio Puerco consist of four terrace and present channel deposits. The Santa Fe Group is divided into lower and upper parts. The lower part of the Santa Fe Group is exposed near the southwestern corner of the study area where deposits consist of reddish-brown mudstone and sandstone correlated to the Popotosa Formation (Unit 1) of Lozinsky and Tedford (1991). They interpreted deposition of the unit in a basin-floor playa setting. The Popotosa Formation is in fault contact to the east with deposits of the upper Santa Fe Group. The upper Santa Fe Group is derived from major tributary fluvial systems (ancestral Rio Puerco Puerco and possibly the Rio San Jose drainages) draining the adjacent Colorado Plateau and Sierra Nacimiento and correlated to parts of Kelley's (1977) Ceja Formation of the Santa Fe Group and equivalent to Machette's (1978) Sierra Ladrones Formation, Connell's Arroyo Ojito Formation (Connell and others, 1999, and Maldonado's lithofacies of the Isleta Reservation (Maldonado and Atencio,1998a, b). The group also locally includes a fine- grained unit (lower Pleistocene) referred to here as the sand, silt, and clay of Chavez Grant (Qsc). The Ceja Formation of the Santa Fe Group as defined here is divided into the following units in descending stratigraphic order: (1) upper sand and gravel unit (upper Pliocene), (2) middle silt, sand, and clay unit (upper Pliocene), and (3) lower sand and gravel unit (Pliocene). The three volcanic fields in the map area are: (1) basalt of Cat Hills, dated at 98-110 ka and composed of seven lava flows and four cinder cones; the flows overlie calcic soils that overlie the upper sand and gravel unit of the Ceja Formation; (2) lava flow of Cat Mesa, dated at about 3 Ma and interfingers with the upper part of the Ceja Formation; (3) diabase of Mohinas Mountain, dated at 8.3 Ma (Baldridge and others, 1987) and intrudes the Popotosa Formation. Numerous high-angle faults cut the area but are mostly buried. The faults generally trend north but deviate to the northwest and northeast. The major normal faults are the Cat Mesa and Mohinas Mountain faults.

Miscellaneous Field Studies Map↗

USGS2007

Surficial sediment character of the New York-New Jersey offshore continental shelf region: A GIS compilation

Broad continental shelf regions such as the New York Bight are the product of a complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression (>100 m sea-level rise) following the end of the last Pleistocene ice advance ~ 20,000 years ago. The area of the U.S. Exclusive Economic Zone (U.S. EEZ) territory, extending 200 nautical miles seaward from the coast, is larger than the continental U.S. and contains submerged landforms that provide a variety of natural functions and societal benefits, such as: critical habitats for fisheries, ship navigation and homeland security, and engineering activities (i.e. oil and gas platforms, pipeline and cable routes, potential wind-energy-generation sites). Some parts of the continental margins, particularly inner-continental shelf regions, also contain unconsolidated hard-mineral deposits such as sand and gravel that are regarded as potential aggregate resources to meet or augment needs not met by onshore deposits (Williams, 1992). The present distribution of surficial sediment off the northeastern United States is shaped from the deposits left by the last glaciation and reflects the cumulative effects of sediment erosion, transport, sorting, and deposition by storm and tidal processes during the Holocene rise in sea level. As a result, the sediments on the sea floor represent both an historical record of former conditions and a guide to possible future sedimentary environments. The U.S. Geological Survey (USGS) through the Coastal and Marine Geology Program, in cooperation with the University of Colorado and other partners, has compiled extant sediment character and textural data as well as other geologic information on the sea floor from all regions around the U.S. into the usSEABED data system (Reid and others, 2005; Buczkowski and others, 2006; Reid and others, 2006). The usSEABED system, which contains information on sediment grain size and lithology for more than 340,500 stations within the U.S. EEZ. has been developed and populated with data as part of the USGS Marine Aggregate Resources and Processes and the National Benthic Habitats projects in order to provide the base-line data needed to update the current maps of offshore surficial geologic character and sediment distribution. The maps are also used to characterize benthic sea floor environments important for marine ecosystems. U.S. Geological Survey, Data Series 118 (Reid and others, 2005), of the usSEABED data release series, represents the combined efforts of the USGS and several other government agencies to provide a unified resource for accessing and preserving records of U.S. east coast sea floor geologic information and sediment texture data. For this present report, we have chosen to focus on the New York-New Jersey region, an area that has been intensely studied by the USGS for many years to address many complex issues. This report illustrates the uses of the usSEABED database for GIS applications, while offering additional insight into the resources and data available from the USGS and its collaborative institutions. This report is based on data contained in U.S. Geological Survey Data Series 118 (Reid and others, 2005) and shows an assortment of example GIS products that are possible using usSEABED. All data are intended to be GIS-ready and should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System. This project employs the Environmental Systems Research Institute's (ESRI) ArcView™ software. Many of these maps were made as part of the ongoing USGS study to assess marine aggregate resources offshore New York and New Jersey, but these maps can serve many other purposes. The marine science community, educators, students and others are encouraged to use these data to generate GIS products for their own purposes. The objectives of the Marine Aggregate Resources and Processes project are to produce a series of new geologic maps and reports of the sea floor that will provide scientific insights into the character and geologic development of U.S. continental margins and to use these maps and information to assess the potential availability of offshore sand and gravel resources. The mapping and aggregate resource assessments are being conducted on a national scale using the usSEABED data base as described in Williams and others (2003). Potential uses for these data include: (1) defining the geological variability of the sea floor in relation to benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and benthic habitats; (3) locating aggregate resources for beach nourishment and industrial applications; and (4) providing a detailed geospatial framework for future marine science research, monitoring, and management activities. The initial assessments are in progress for the New York Bight and Louisiana offshore areas.

New Jersey, New York↗

USGS2007

Antarctic ice-rafted detritus (IRD) in the South Atlantic: Indicators of iceshelf dynamics or ocean surface conditions?

Ocean sediment core TN057-13PC4/ODP1094, from the Atlantic sector of the Southern Ocean, contains elevated lithogenic material in sections representing the last glacial period compared to the Holocene. This ice-rafted detritus is mainly comprised of volcanic glass and ash, but has a significant input of what was previously interpreted as quartz during peak intervals (Kanfoush et al., 2000, 2002). Our analysis of these clear mineral grains indicates that most are plagioclase, and that South Sandwich Islands is the predominant source, similar to that inferred for the volcanic glass (Nielsen et al., in review). In addition, quartz and feldspar with possible Antarctic origin occur in conjunction with postulated episodes of Antarctic deglaciation. We conclude that while sea ice was the dominant ice rafting agent in the Polar Frontal Zone of the South Atlantic during the last glacial period, the Holocene IRD variability may reflect Antarctic ice sheet dynamics.

Open-File Report↗

USGS2007

Preliminary Geologic Map of the Sanchez Reservoir Quadrangle and Eastern Part of the Garcia Quadrangle, Costilla County, Colorado

This geologic map is based entirely on new mapping by Thompson and Machette, whereas the geophysical data and interpretations were supplied by Drenth. The map area includes most of San Pedro Mesa, a basalt covered mesa that is uplifted as a horst between the Southern Sangre de Cristo fault zone (on the west) and the San Luis fault zone on the east. The map also includes most of the Sanchez graben, a deep structural basin that lies between the San Luis fault zone (on the west) and the Central Sangre de Cristo fault zone on the east. The oldest rocks in the map area are Proterozoic granites and Paleozoic sedimentary rocks, which are only exposed in a small hill on the west-central part of the mesa. The low hills that rise above San Pedro mesa are comprised of middle(?) Miocene volcanic rocks that are undated, but possibly correlative with mapped rocks to the east of Sanchez Reservoir. The bulk of the map area is comprised of the Servilleta Basalt, a regional series of flood basalts of Pliocene age. The west, north, and northeast margins of the mesa are covered by extensive landslide deposits that rest on poorly exposed sediment of the Santa Fe Group. Rare exposures of the sediment are comprised of siltstones, sandstones, and minor fluvial conglomerates. Most of the low ground surrounding the mesa is covered by surficial deposits of Quaternary age. The piedmont alluvium is subdivided into three Pleistocene units, and three Holocene units. The oldest Pleistocene gravel (unit Qao) forms an extensive coalesced alluvial fan and piedmont surface that is known as the Costilla Plains. This surface extends west from San Pedro Mesa to the Rio Grande. The primary geologic hazards in the map are are from earthquakes and landslides. There are three major fault zones in the area (as discussed above), and they all show evidence for late Pleistocene to possible Holocene movement. Two generations of landslides are mapped (younger and older), and both may have seismogenic origins.

Open-File Report↗

USGS2009

Logs of paleoseismic excavations across the Central Range Fault, Trinidad

This publication makes available maps and trench logs associated with studies of the Central Range Fault, part of the South American-Caribbean plate boundary in Trinidad. Our studies were conducted in 2001 and 2002. We mapped geomorphic features indicative of active faulting along the right-lateral, Central Range Fault, part of the South American-Caribbean plate boundary in Trinidad. We excavated trenches at two sites, the Samlalsingh and Tabaquite sites. At the Samlalsingh site, sediments deposited after the most recent fault movement bury the fault, and the exact location of the fault was unknown until we exposed it in our excavations. At this site, we excavated a total of eleven trenches, six of which exposed the fault. The trenches exposed fluvial sediments deposited over a strath terrace developed on Miocene bedrock units. We cleaned the walls of the excavations, gridded the walls with either 1 m X 1 m or 1 m X 0.5 m nail and string grid, and logged the walls in detail at a scale of 1:20. Additionally, we described the different sedimentary units in the field, incorporating these descriptions into our trench logs. We mapped the locations of the trenches using a tape and compass. Our field logs were scanned, and unit contacts were traced in Adobe Illustrator. The final drafted logs of all the trenches are presented here, along with photographs showing important relations among faults and Holocene sedimentary deposits. Logs of south walls were reversed in Illustrator, so that all logs are drafted with the view direction to the north. We collected samples of various materials exposed in the trench walls, including charcoal samples for radiocarbon dating from both faulted and unfaulted deposits. The locations of all samples collected are shown on the logs. The ages of seventeen of the charcoal samples submitted for radiocarbon analysis at the University of Arizona Accelerator Mass Spectrometry Laboratory in Tucson, Ariz., are given in Table 1. Samples found in Table 1 are shown in red on the trench logs. All radiocarbon ages are calibrated and given with 2 standard deviation age ranges. Our studies suggest that the Central Range Fault is a Holocene fault capable of producing damaging earthquakes in Trinidad

Open-File Report↗

USGS2015

The relationship between the ratio of strontium to calcium and sea-surface temperature in a modern Porites astreoides coral: Implications for using P. astreoides as a paleoclimate archive

An inverse relationship has been demonstrated between water temperature and the ratio of strontium to calcium (Sr/Ca) in coral aragonite for a number of Pacific species of the genus Porites . This empirically determined relationship has been used to reconstruct past sea-surface temperature (SST) from modern and Holocene age coral archives. A study was conducted to investigate this relationship for Porites astreoides to determine the potential for using these corals as a paleotemperature archive in the Caribbean and western tropical Atlantic Ocean. Skeletal aragonite from a P. astreoides colony growing offshore of the southeast coast of Florida was subsampled with a mean temporal resolution of 14 samples per year and analyzed for Sr/Ca. The resulting Sr/Ca time series yielded well-defined annual cycles that correspond to annual growth bands in the coral. Sr/Ca was regressed against a monthly SST record from C-MAN buoy station FWYF1 (located at Fowey Rocks, Florida), resulting in the following Sr/Ca-SST relationship: Sr/Ca = –0.040*SST + 10.128 (R = –0.77). A 10-year time series of Sr/Ca-derived SST yields annual cycles with a 10–12 degree Celsius seasonal amplitude, consistent with available local instrumental records. We conclude that Sr/Ca in Porites astreoides from the Caribbean/Atlantic region has high potential for developing subannually resolved modern and recent Holocene SST records.

Florida↗

USGS2022

Photomosaics and logs associated with study of West Napa Fault at Ehlers Lane, north of Saint Helena, California

The West Napa Fault has previously been mapped as extending ~45 kilometers (km) from northern Vallejo to southern Saint Helena, California, dominantly running along the western edge of Napa Valley. A zone of fault strands (some previously unmapped) along a ~15-km section of the fault ruptured during the 2014 magnitude 6.0 South Napa earthquake, illustrating the need for further investigation of this little-studied structure. Based on light detection and ranging (lidar) topography and field examination, the fault zone likely extends an additional 10 km or more northward past Saint Helena. In this vicinity, geomorphology suggests two fault strands, one along the range front and another associated with a line of rounded hills that rise 5–10 meters above the middle of the valley. In 2017, we excavated two trenches across an apparent fault scarp on the east side of one elongate hill near Ehlers Lane north of Saint Helena. Examination of the walls revealed three main sedimentary packages. The oldest package, weakly lithified alluvial fan gravels with local sand and silt layers, is tilted 25°–35° to the west. Overlying these tilted strata are two younger sets of strata. On the west side, underlying the crest of the scarp, are alluvial fan gravels with local sand and silt lenses, potentially tilted a few degrees to the west. On the east side, deposited against the scarp, are much finer grained (dominantly fine sand to silt) subhorizontal fluvial strata, likely overbank deposits from the Napa River. We obtained age control on the two younger units through a combination of radiocarbon, infrared-stimulated luminescence, and obsidian hydration dating, establishing that they are latest Pleistocene to modern in age. Although there are no prominent unconformities within the alluvial fan sediments, sample dating indicates there are two generations, one in the 10–20 thousand year (ka) age range and one in the <3 ka age range. Owing to a general lack of well-defined laterally continuous alluvial fan units, it is difficult to distinguish contacts between the two generations except in the immediate proximity of dated samples. The river sediments approximately span the Holocene. No faults were apparent in either trench, indicating that any fault related to the observed surface deformation has not ruptured to the surface at this site during the Holocene and is likely blind.

California↗