Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Soil Systems”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

Estimation of Total Nitrogen and Phosphorus in New England Streams Using Spatially Referenced Regression Models

The U.S. Geological Survey (USGS), in cooperation with the U.S. Environmental Protection Agency (USEPA) and the New England Interstate Water Pollution Control Commission (NEIWPCC), has developed a water-quality model, called SPARROW (Spatially Referenced Regressions on Watershed Attributes), to assist in regional total maximum daily load (TMDL) and nutrient-criteria activities in New England. SPARROW is a spatially detailed, statistical model that uses regression equations to relate total nitrogen and phosphorus (nutrient) stream loads to nutrient sources and watershed characteristics. The statistical relations in these equations are then used to predict nutrient loads in unmonitored streams. The New England SPARROW models are built using a hydrologic network of 42,000 stream reaches and associated watersheds. Watershed boundaries are defined for each stream reach in the network through the use of a digital elevation model and existing digitized watershed divides. Nutrient source data is from permitted wastewater discharge data from USEPA's Permit Compliance System (PCS), various land-use sources, and atmospheric deposition. Physical watershed characteristics include drainage area, land use, streamflow, time-of-travel, stream density, percent wetlands, slope of the land surface, and soil permeability. The New England SPARROW models for total nitrogen and total phosphorus have R-squared values of 0.95 and 0.94, with mean square errors of 0.16 and 0.23, respectively. Variables that were statistically significant in the total nitrogen model include permitted municipal-wastewater discharges, atmospheric deposition, agricultural area, and developed land area. Total nitrogen stream-loss rates were significant only in streams with average annual flows less than or equal to 2.83 cubic meters per second. In streams larger than this, there is nondetectable in-stream loss of annual total nitrogen in New England. Variables that were statistically significant in the total phosphorus model include discharges for municipal wastewater-treatment facilities and pulp and paper facilities, developed land area, agricultural area, and forested area. For total phosphorus, loss rates were significant for reservoirs with surface areas of 10 square kilometers or less, and in streams with flows less than or equal to 2.83 cubic meters per second. Applications of SPARROW for evaluating nutrient loading in New England waters include estimates of the spatial distributions of total nitrogen and phosphorus yields, sources of the nutrients, and the potential for delivery of those yields to receiving waters. This information can be used to (1) predict ranges in nutrient levels in surface waters, (2) identify the environmental variables that are statistically significant predictors of nutrient levels in streams, (3) evaluate monitoring efforts for better determination of nutrient loads, and (4) evaluate management options for reducing nutrient loads to achieve water-quality goals.

Scientific Investigations Report↗

Quantification of the contribution of nitrogen from septic tanks to ground water in Spanish Springs Valley, Nevada

Analysis of total dissolved nitrogen concentrations from soil water samples collected within the soil zone under septic tank leach fields in Spanish Springs Valley, Nevada, shows a median concentration of approximately 44 milligrams per liter (mg/L) from more than 300 measurements taken from four septic tank systems. Using two simple mass balance calculations, the concentration of total dissolved nitrogen potentially reaching the ground-water table ranges from 25 to 29 mg/L. This indicates that approximately 29 to 32 metric tons of nitrogen enters the aquifer every year from natural recharge and from the 2,070 houses that use septic tanks in the densely populated portion of Spanish Springs Valley. Natural recharge contributes only 0.25 metric tons because the total dissolved nitrogen concentration of natural recharge was estimated to be low (0.8 mg/L). Although there are many uncertainties in this estimate, the sensitivity of these uncertainties to the calculated load is relatively small, indicating that these values likely are accurate to within an order of magnitude. The nitrogen load calculation will be used as an input function for a ground-water flow and transport model that will be used to test management options for controlling nitrogen contamination in the basin.

Scientific Investigations Report↗

Evaluation of a watershed model to simulate sediment transport in a small agricultural watershed in Indiana

The streamflow and sediment components of the watershed model, ' Hydrologic Simulation Program-Fortran ', were evaluated using 2 years and 9 months of data from a 2.7-sq mi agricultural watershed in Indiana. Hydrographs of simulated sediment concentration generally have smaller peaks and longer recessions than do hydrographs of measured data. The attenuation of simulated peaks was partly caused by difficulties in designing a representative channel system. Simulated surface runoff during low-intensity rainfall was greater than measured surface runoff; this caused an overestimation of sediment concentration and discharge. Rainfalls of low intensity were mostly absorbed by the soil, but the model predicted that the amount of surface runoff from such storms would be large. The overly large volume of simulated surface runoff transported more sediment than actually occurred. The mean absolute error of mean sediment concentrations during storms is 45% of the measured average concentration. The error resulted from a combination of error in recording streamflow and rainfall, in simulating streamflows, and in simulating sedimentation processes. The largest percent errors are associated with simulated maximum streamflows and average sediment discharges. The root-mean-square errors are 93 and 102% of the measured maximum streamflow and average sediment discharges. (USGS)

Indiana↗

Instream investigations in the Beaver Creek Watershed in West Tennessee, 1991-95

The U.S. Geological Survey (USGS), in cooperation with the Tennessee Department of Agriculture, began a long-term scientific investigation in 1989 to evaluate the effect of agricultural activities on water quality and the effectiveness of agricultural best management practices in the Beaver Creek watershed, West Tennessee. In 1993 as a part of this study, the USGS, in cooperation with the Natural Resources Conservation Service, Shelby County Soil Conservation District, and the Tennessee Soybean Promotion Board, began an evaluation of the physical, chemical, biological and hydrological factors that affect water quality in streams and wetlands, and instream resource-management systems to treat agricultural nonpoint-source runoff and improve water quality. The purpose of this report is to present the results of three studies of stream and wetland investigations and a study on the transport of aldicarb from an agricultural field in the Beaver Creek watershed. A natural bottomland hardwood wetland and an artificially constructed wetland were evaluated as instream resource-management systems. These two studies showed that wetlands are an effective way to improve the quality of agricultural nonpoint-source runoff. The wetlands reduced concentrations and loads of suspended sediments, nutrients, and pesticides in the streams. A third paper documents the influence of riparian vegetation on the biological structure and water quality of a small stream draining an agricultural field. A comparison of the upper reach lined with herbaceous plants and the lower reach with mature woody vegetation showed a more stable biological community structure and Water- quality characteristics in the woody reach than in the herbaceous reach. The water-quality characteristics monitored were pH, temperature, dissolved oxygen, and specific conductance. The herbaceous reach had a greater diversity and abundance of organisms during spring and early summer, but the abundance dropped by approximately 85 percent during late summer. A fourth study describes the transport of aldicarb and its metabolites--aldicarb sulfoxide and aldicarb sulfone-in runoff at a small stream draining a cotton field. During 1991 to 1995, aldicarb and its metabolites were detected in runoff events. The highest concentrations occurred when aldicarb was applied to the field just hours before a rain storm. Aldicarb was not detectable in runoff a few weeks after application. The metabolites of aldicarb were detectable for 76 days after application. These studies demonstrate streambank vegetation and wetlands have a significant influence on stream water quality. The importance of weather conditions to herbicide application and runoff also is evident. This information can be used by resource managers to sustain and improve our Nation's streams for future generations.

Water-Resources Investigations Report↗

Developing a temporal database of urban development for the Baltimore/Washington region

The U.S. Geological Survey (USGS), the University of Maryland Baltimore County (UMBC), and the U.S. Bureau of the Census are working together as a multiagency, multidisciplinary team in developing a temporal database that documents the growth of the Baltimore-Washington metropolitan region. This database consists of urban development, principal transportation, shoreline, and population density change. The urban development theme, considered a primary data layer in the study of urban land transformation resulting from human impact on the land, is the focus of this paper. The Baltimore-Washington Spatial Dynamics and Human Impacts Study builds on earlier research efforts that mapped urban land use change for the San Francisco Bay area (Acevedo and Bell, 1994; Bell and others, 1995; Kirtland and others, 1994). In developing a temporal database (Acevedo and others, in press), the team participants hope to provide data that can be used to study patterns of urban growth; assess ecological, environmental, and climatic impacts of urban change; and model and predict future urbanization patterns and impacts (Clarke and others, 1996). Both the San Francisco and Baltimore-Washington regions were selected because of the rapid urban growth and resulting impacts on their ecosystems. The Chesapeake Bay region in particular has undergone extensive environmental agitation due to the hydrologic problems that have arisen from the increase in impermeable surfaces and structures, that is buildings and pavement that physically cover the soil. Because of the inability of water to percolate into the ground, little purification occurs by filtration. Water runs over paved surfaces and quickly washes high levels of toxins directly into the water system. Toxins like gasoline, oil, and fertilizer have dramatically affected the local streams, rivers, and the bay. ABSTRACT The U.S. Geological Survey, the University of Maryland Baltimore County, and the U.S. Bureau of the Census are developing a temporal database to study urban development in the Baltimore-Washington region. The primary data layer, the extent of urban or built-up areas, was compiled using a geographic information system and historical maps, remotely sensed data, digital land use data, and census information from a variety of sources. Urban land use change has been documented by the Baltimore-Washington Spatial Dynamics & Human Impact Study Team for the last 200 years. The methods, definitions, and collection criteria used to define urban or built-up areas were developed by a multi-disciplinary team that also ensures consistency in collection techniques and documentation methods for subsequent application in other regions. Animation techniques were used to visualize the database and to document the evolution of the region's urban landscape. The database is an important tool to urban and regional planners, ecologists, and global change researchers for measuring trends in urban sprawl, analyzing patterns of water pollution, understanding the impacts of development on ecosystems, and developing predictive modeling techniques to better forecast areas of urban growth. This paper describes the techniques used to map the extent of urban areas for Phase I and does not discuss Phase II in detail because the work is still in progress. In this study, urban development is defined as areas of intensive use, with much of the land covered by structures. The built-up areas are characterized by the existence of a systematic street pattern, and the relative concentration of buildings and associated intensive use areas, such as parking lots. Using this definition, urban development does not refer to political boundaries and may include incorporated or unincorporated areas as well as military reservations. ABSTRACT The U.S. Geological Survey, the University of Maryland Baltimore County, and the U.S. Bureau of the Census are developing a temporal database to study urban development in the Baltimore-Washington region. The primary data layer, the extent of urban or built-up areas, was compiled using a geographic information system and historical maps, remotely sensed data, digital land use data, and census information from a variety of sources. Urban land use change has been documented by the Baltimore-Washington Spatial Dynamics & Human Impact Study Team for the last 200 years. The methods, definitions, and collection criteria used to define urban or built-up areas were developed by a multi-disciplinary team that also ensures consistency in collection techniques and documentation methods for subsequent application in other regions. Animation techniques were used to visualize the database and to document the evolution of the region's urban landscape. The database is an important tool to urban and regional planners, ecologists, and global change researchers for measuring trends in urban sprawl, analyzing patterns of water pollution, understanding the impacts of development on ecosystems, and developing predictive modeling techniques to better forecast areas of urban growth. To build the urban component of the temporal database, a multidisciplinary team was assembled and a phased approach initiated. Expanding on procedures developed for the San Francisco Regional Study (Bell and others, 1995), the team developed data definitions, a classification scheme, compilation criteria, mapping specifications, guidelines for source materials, and metadata specifications to support development of a logically consistent dataset. Extensive documentation procedures were established to ensure consistency in data collection, and for subsequent application to other regions. Phase II was the implementation of the regional mapping effort. ABSTRACT The U.S. Geological Survey, the University of Maryland Baltimore County, and the U.S. Bureau of the Census are developing a temporal database to study urban development in the Baltimore-Washington region. The primary data layer, the extent of urban or built-up areas, was compiled using a geographic information system and historical maps, remotely sensed data, digital land use data, and census information from a variety of sources. Urban land use change has been documented by the Baltimore-Washington Spatial Dynamics & Human Impact Study Team for the last 200 years. The methods, definitions, and collection criteria used to define urban or built-up areas were developed by a multi-disciplinary team that also ensures consistency in collection techniques and documentation methods for subsequent application in other regions. Animation techniques were used to visualize the database and to document the evolution of the region's urban landscape. The database is an important tool to urban and regional planners, ecologists, and global change researchers for measuring trends in urban sprawl, analyzing patterns of water pollution, understanding the impacts of development on ecosystems, and developing predictive modeling techniques to better forecast areas of urban growth. The study area for Phase I consisted of an approximate area of 15- by 15-minute segment centered around the city of Baltimore (fig. 1). Phase I was used as a prototype for the technique development and integration that the multiagency collaborative effort would require. The regional study, Phase II, encompassed a 2-degree square centered on Washington, D.C. With more than 7 million people spread across 39 counties, the Baltimore-Washington region is one the Nation's fastest growing metropolitan areas. The two cities are rapidly merging into one.

Maryland↗

Wind erosion from a sagebrush steppe burned by wildfire: measurements of PM 10 and total horizontal sediment flux

Wind erosion and aeolian transport processes are under studied compared to rainfall-induced erosion and sediment transport on burned landscapes. Post-fire wind erosion studies have predominantly focused on near-surface sediment transport and associated impacts such as on-site soil loss and site fertility. Downwind impacts, including air quality degradation and deposition of dust or contaminants, are also likely post-fire effects; however, quantitative field measurements of post-fire dust emissions are needed for assessment of these downwind risks. A wind erosion monitoring system was installed immediately following a desert sagebrush and grass wildfire in southeastern Idaho, USA to measure wind erosion from the burned landscape. This paper presents measurements of horizontal sediment flux and PM 10 vertical flux from the burned area. We determined threshold wind speeds and corresponding threshold friction velocities to be 6.0 and 20 m s -1 , respectively, for the 4 months immediately following the fire and 10 and 0.55 m s -1 for the following spring months. Several major wind erosion events were measured in the months following the July 2010 Jefferson Fire. The largest wind erosion event occurred in early September 2010 and produced 1495 kg m -1 of horizontal sediment transport within the first 2 m above the soil surface, had a maximum PM 10 vertical flux of 100 mg m -2 s -1 , and generated a large dust plume that was visible in satellite imagery. The peak PM 10 concentration measured on-site at a height of 2 m in the downwind portion of the burned area was 690 mg m -3 . Our results indicate that wildfire can convert a relatively stable landscape into one that is a major dust source.

Idaho↗

Application of near-surface geophysics as part of a hydrologic study of a subsurface drip irrigation system along the Powder River floodplain near Arvada, Wyoming

Rapid development of coalbed natural gas (CBNG) production in the Powder River Basin (PRB) of Wyoming has occurred since 1997. National attention related to CBNG development has focused on produced water management, which is the single largest cost for on-shore domestic producers. Low-cost treatment technologies allow operators to reduce their disposal costs, provide treated water for beneficial use, and stimulate oil and gas production by small operators. Subsurface drip irrigation (SDI) systems are one potential treatment option that allows for increased CBNG production by providing a beneficial use for the produced water in farmland irrigation. Water management practices in the development of CBNG in Wyoming have been aided by integrated geophysical, geochemical, and hydrologic studies of both the disposal and utilization of water. The U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL) and the U.S. Geological Survey (USGS) have utilized multi-frequency airborne, ground, and borehole electromagnetic (EM) and ground resistivity methods to characterize the near-surface hydrogeology in areas of produced water disposal. These surveys provide near-surface EM data that can be compared with results of previous surveys to monitor changes in soils and local hydrology over time as the produced water is discharged through SDI. The focus of this investigation is the Headgate Draw SDI site, situated adjacent to the Powder River near the confluence of a major tributary, Crazy Woman Creek, in Johnson County, Wyoming. The SDI system was installed during the summer of 2008 and began operation in October of 2008. Ground, borehole, and helicopter electromagnetic (HEM) conductivity surveys were conducted at the site prior to the installation of the SDI system. After the installation of the subsurface drip irrigation system, ground EM surveys have been performed quarterly (weather permitting). The geophysical surveys map the heterogeneity of the near-surface geology and hydrology of the study area. The geophysical data are consistent between surveys using different techniques and between surveys carried out at different times from 2007 through 2011. This paper summarizes geophysical results from the 4-year monitoring study of the SDI system.

Wyoming↗

Distribution of contaminants in the environment and wildlife habitat use: A case study with lead and waterfowl on the Upper Texas Coast

The magnitude and distribution of lead contamination remain unknown in wetland systems. Anthropogenic deposition of lead may be contributing to negative population-level effects in waterfowl and other organisms that depend on dynamic wetland habitats, particularly if they are unable to detect and differentiate levels of environmental contamination by lead. Detection of lead and behavioral response to elevated lead levels by waterfowl is poorly understood, but necessary to characterize the risk of lead-contaminated habitats. We measured the relationship between lead contamination of wetland soils and habitat use by mottled ducks ( Anas fulvigula ) on the Upper Texas Coast, USA. Mottled ducks have historically experienced disproportionate negative effects from lead exposure, and exhibit a unique nonmigratory life history that increases risk of exposure when inhabiting contaminated areas. We used spatial interpolation to estimate lead in wetland soils of the Texas Chenier Plain National Wildlife Refuge Complex. Soil lead levels varied across the refuge complex (0.01–1085.51 ppm), but greater lead concentrations frequently corresponded to areas with high densities of transmittered mottled ducks. We used soil lead concentration data and MaxENT species distribution models to quantify relationships among various habitat factors and locations of mottled ducks. Use of habitats with greater lead concentration increased during years of a major disturbance. Because mottled ducks use habitats with high concentrations of lead during periods of stress, have greater risk of exposure following major disturbance to the coastal marsh system, and no innate mechanism for avoiding the threat of lead exposure, we suggest the potential presence of an ecological trap of quality habitat that warrants further quantification at a population scale for mottled ducks.

Texas↗

Hydrochemical Regions of the Glacial Aquifer System, Northern United States, and Their Environmental and Water-Quality Characteristics

The glacial aquifer system in the United States is a large (953,000 square miles) regional aquifer system of heterogeneous composition. As described in this report, the glacial aquifer system includes all unconsolidated geologic material above bedrock that lies on or north of the line of maximum glacial advance within the United States. Examining ground-water quality on a regional scale indicates that variations in the concentrations of major and minor ions and some trace elements most likely are the result of natural variations in the geologic and physical environment. Study of the glacial aquifer system was designed around a regional framework based on the assumption that two primary characteristics of the aquifer system can affect water quality: intrinsic susceptibility (hydraulic properties) and vulnerability (geochemical properties). The hydrochemical regions described in this report were developed to identify and explain regional spatial variations in ground-water quality in the glacial aquifer system within the hypothetical framework context. Data analyzed for this study were collected from 1991 to 2003 at 1,716 wells open to the glacial aquifer system. Cluster analysis was used to group wells with similar ground-water concentrations of calcium, chloride, fluoride, magnesium, potassium, sodium, sulfate, and bicarbonate into five unique groups. Maximum Likelihood Classification was used to make the extrapolation from clustered groups of wells, defined by points, to areas of similar water quality (hydrochemical regions) defined in a geospatial model. Spatial data that represented average annual precipitation, average annual temperature, land use, land-surface slope, vertical soil permeability, average soil clay content, texture of surficial deposits, type of surficial deposit, and potential for ground-water recharge were used in the Maximum Likelihood Classification to classify the areas so the characteristics of the hydrochemical regions would resemble the characteristics of the clusters. The result of the Maximum Likelihood Classification is a map showing five hydrochemical regions of the glacial aquifer system. Statistical analysis of ion concentrations (calcium, chloride, fluoride, magnesium, sodium, potassium, sulfate, and bicarbonate) in samples collected from wells completed in the glacial aquifer system illustrates that variations in water quality can be explained, in part, by related environmental characteristics that control the movement of ground water through the aquifer system. A comparison of median concentrations of chemical constituents in ground water among the five hydrochemical regions indicates that ground water in the Midwestern Agricultural Region, the Urban-Influenced Region, and the Western Agriculture and Grassland Region has the highest concentrations of major and minor ions, whereas ground water in the Northern and Great Lakes Forested Region and the Mountain and Coastal Forested Region has the lowest concentrations of these ions. Median concentrations of barium, arsenic, lithium, boron, strontium, and nitrite plus nitrate as nitrogen also are significantly different among the hydrochemical regions.

Scientific Investigations Report↗

Mercury in ground water, septage, leach-field effluent, and soils in residential areas, New Jersey coastal plain

Water samples were collected from domestic wells at an unsewered residential area in Gloucester County, New Jersey where mercury (Hg) concentrations in well water were known to exceed the USEPA maximum contaminant level (MCL) of 2000 ng/L. This residential area (the CSL site) is representative of more than 70 such areas in southern New Jersey where about 600 domestic wells, sampled previously by State and county agencies, yielded water containing Hg at concentrations that exceed the MCL. Recent studies indicate that background concentrations of Hg in water from this unconfined sand and gravel aquifer system are < 10 ng/L. Additional sampling was conducted at the CSL site in order to better understand sources of Hg and potential Hg transport mechanisms in the areas with Hg-contaminated ground water. At the CSL site, concentrations of Hg were substantially lower (although still exceeding the MCL in some cases) in filtered water samples than in the unfiltered water samples collected previously from the same wells. Surfactants and elevated concentrations of sodium, chloride, nitrate, ammonium, and phosphate in water from domestic and observation wells indicated septic-system effects on water quality; detections of sulfide indicated localized reducing conditions. Hg concentrations in septage and leach-field effluent sampled at several other households in the region were low relative to the contaminant-level Hg concentrations in water from domestic wells. Relations of Hg concentrations in leach-field effluent to iron concentrations indicate that reductive dissolution of iron hydroxides in soils may release Hg to the percolating effluent.

New Jersey↗

Isotopic variations of dissolved copper and zinc in stream waters affected by historical mining

Zinc and Cu play important roles in the biogeochemistry of natural systems, and it is likely that these interactions result in mass-dependent fractionations of their stable isotopes. In this study, we examine the relative abundances of dissolved Zn and Cu isotopes in a variety of stream waters draining six historical mining districts located in the United States and Europe. Our goals were to (1) determine whether streams from different geologic settings have unique or similar Zn and Cu isotopic signatures and (2) to determine whether Zn and Cu isotopic signatures change in response to changes in dissolved metal concentrations over well-defined diel (24-h) cycles. Average δ 66 Zn and δ 65 Cu values for streams varied from +0.02‰ to +0.46‰ and −0.7‰ to +1.4‰, respectively, demonstrating that Zn and Cu isotopes are heterogeneous among the measured streams. Zinc or Cu isotopic changes were not detected within the resolution of our measurements over diel cycles for most streams. However, diel changes in Zn isotopes were recorded in one stream where the fluctuations of dissolved Zn were the largest. We calculate an apparent separation factor of ∼0.3‰ ( 66/64 Zn) between the dissolved and solid Zn reservoirs in this stream with the solid taking up the lighter Zn isotope. The preference of the lighter isotope in the solid reservoir may reflect metabolic uptake of Zn by microorganisms. Additional field investigations must evaluate the contributions of soils, rocks, minerals, and anthropogenic components to Cu and Zn isotopic fluxes in natural waters. Moreover, rigorous experimental work is necessary to quantify fractionation factors for the biogeochemical reactions that are likely to impact Cu and Zn isotopes in hydrologic systems. This initial investigation of Cu and Zn isotopes in stream waters suggests that these isotopes may be powerful tools for probing biogeochemical processes in surface waters on a variety of temporal and spatial scales.

Geochimica et Cosmochimica Acta↗

Identification of potential wetlands in training areas on Ravenna Army Ammunition Plant, Ohio, and guidelines for their management

Potential wetlands in training areas on Ravenna Army Ammunition Plant, Ohio, were mapped by use of geographic information system (GIS) data layers and field inspection. The GIS data layers were compiled from existing sources and interpretation of aerial photography. Data layers used in the GIS analysis were wetland-plant communities, hydric soils, National Wetlands Inventory designated areas, and wet areas based on photogrammetry. According to review of these data layers, potential wetlands constitute almost one-third of the land in the training areas. A composite map of these four data layers was compiled for use during inspection of the training areas. Field inspection focused on the presence of hydrophytic vegetation and macroscopic evidences of wetland hydrology. Results of the field inspection were in general agreement with those predicted by the GIS analysis, except that some wet areas were more extensive than predicted because of high amounts of precipitation during critical periods of 1995 and 1996. Guidelines for managing wetlands in the training areas are presented.

Open-File Report↗

Antimony

Antimony is an important mineral commodity used widely in modern industrialized societies. The element imparts strength, hardness, and corrosion resistance to alloys that are used in many areas of industry, including in lead-acid storage batteries. Antimony’s leading use is as a fire retardant in safety equipment and in household goods, such as mattresses. The U.S. Government has considered antimony to be a critical mineral mainly because of its use in military applications. The great majority of the world’s antimony comes from China, and much of the remainder is shipped to China for smelting. Antimony resources are unevenly distributed around the world. China has the bulk of the world’s identified resources; other countries that have identified antimony resources include Bolivia, Canada, Mexico, Russia, South Africa, Tajikistan, and Turkey. Resources in the United States are located mainly in Alaska, Idaho, Montana, and Nevada. The most significant antimony mineral deposits occur in geologic environments with a thick sequence of siliciclastic sedimentary rocks in areas with significant fault and fracture systems. The most common antimony ore mineral is stibnite (Sb2 S3 ), but more than 100 other minerals also contain antimony. The presence of antimony in surface waters and groundwaters results primarily from rock weathering, soil runoff, and anthropogenic sources. Global emissions of antimony to the atmosphere average 6,100 metric tons per year. Empirical data suggest that the acid-generating potential of antimony mine waste is low.

Professional Paper↗

Ground-water age and atmospheric tracers: Simulation studies and analysis of field data from the Mirror Lake site, New Hampshire

The use of environmental tracers in characterization of ground-water systems is investigated through mathematical modeling of ground-water age and atmospheric tracer transport, and by a field study at the Mirror Lake site, New Hampshire. Theory is presented for modeling ground-water age using the advective-dispersive transport equation. The transport equation includes a zero-order source of unit strength, corresponding to the rate of aging, and can accommodate matrix diffusion and other exchange processes. The effect of temperature fluctuations and layered soils on transport of atmospheric gases to the water table is investigated using a one-dimensional numerical model of chlorofluorocarbon (CFC-11) transport. The nonlinear relation between temperature and Henry's Law coefficient (reflecting air/water phase partitioning) can cause the apparent recharge temperature to be elevated above the annual mean temperature where the water table is shallow. In addition, fine-grained soils can isolate the air phase in the unsaturated zone from the atmosphere. At the USGS' Mirror Lake, New Hampshire fractured-rock research site CFC concentrations near the water table are depleted where dissolved oxygen is low. CFC-11 and CFC-113 are completely absent under anaerobic conditions, while CFC-12 is as low as one-third of modern concentrations. Anaerobic biodegradation apparently consumes CFC's near the water table at this site. One area of active degradation appears to be associated with streamflow loss to ground water. Soil gas concentrations are generally close to atmospheric levels, although some spatial correlation is observed between depleted concentrations of CFC-11 and CFC-113 in soil gas and water-table samples. Results of unsaturated-zone monitoring indicate that recharge occurs throughout the year in the watershed, even during summer evapotranspiration periods, and that seasonal temperature fluctuations occur as much as 5 meters below land surface. Application of ground-water age and CFC-11 transport models to the large-scale ground-water system at Mirror Lake illustrates the similarities between age and chemical transport. Generally, bedrock porosities required to match observed apparent ages from CFC concentrations are high relative to porosities measured on cores. Although matrix diffusion has no effect on steady-state age, it can significantly reduce CFC concentrations in fractured rock in which the effective porosity is low.

New Hampshire↗

Simultaneous speciation of arsenic, selenium, and chromium: species, stability, sample preservation, and analysis of ash and soil leachates

An analytical method using high-performance liquid chromatography separation with inductively coupled plasma mass spectrometry (ICP-MS) detection previously developed for the determination of Cr(III) and Cr(VI) has been adapted to allow the determination of As(III), As(V), Se(IV), Se(VI), Cr(III), and Cr(VI) under the same chromatographic conditions. Using this method, all six inorganic species can be determined in less than 3 min. A dynamic reaction cell (DRC)-ICP-MS system was used to detect the species eluted from the chromatographic column in order to reduce interferences. A variety of reaction cell gases and conditions may be utilized with the DRC-ICP-MS, and final selection of conditions is determined by data quality objectives. Results indicated all starting standards, reagents, and sample vials should be thoroughly tested for contamination. Tests on species stability indicated that refrigeration at 10&deg; C was preferential to freezing for most species, particularly when all species were present, and that sample solutions and extracts should be analyzed as soon as possible to eliminate species instability and interconversion effects. A variety of environmental and geological samples, including waters and deionized water [leachates] and simulated biological leachates from soils and wildfire ashes have been analyzed using this method. Analytical spikes performed on each sample were used to evaluate data quality. Speciation analyses were conducted on deionized water leachates and simulated lung fluid leachates of ash and soils impacted by wildfires. These results show that, for leachates containing high levels of total Cr, the majority of the chromium was present in the hexavalent Cr(VI) form. In general, total and hexavalent chromium levels for samples taken from burned residential areas were higher than those obtained from non-residential forested areas. Arsenic, when found, was generally in the more oxidized As(V) form. Selenium (IV) and (VI) were present, but typically at low levels.

Analytical and Bioanalytical Chemistry↗

Effects of forest harvesting on ecosystem health in the headwaters of the New York City Water Supply, Catskill Mountains, New York

The effects of forest clearcutting and selective harvesting on forest soils, soil and stream water chemistry, forest regrowth, and aquatic communities were studied in four small headwater catchments. This research was conducted to identify the sensitivity of forested ecosystems to forest disturbance in the northeastern United States. The study area was in the headwaters of the Neversink Reservoir watershed, part of the New York City water supply system, in the Catskill Mountains of southeastern New York. Two sub-catchments of the Shelter Creek watershed were selectively harvested, one in its northern half and one more heavily in its southern half in 1995?96, the Dry Creek watershed was clearcut in the winter of 1996?97, and the Clear Creek watershed was left undisturbed and monitored as a control site. Monitoring was conducted from 4 years before the harvests until 4 years after the harvests. Clearcutting caused a large release of nitrate (NO3-) from watershed soils and a concurrent release of inorganic monomeric aluminum (Alim), which is toxic to some aquatic biota. The increased soil NO3- concentrations measured after the harvest could be completely accounted for by the decrease in nitrogen (N) uptake by watershed trees, rather than an increase in N mineralization and nitrification. The large increase in stream water NO3- and Alim concentrations caused 100-percent mortality of caged brook trout (Salvelinus fontinalis) during the first year after the clearcut and adversely affected macroinvertebrate communities for 2 years after the harvest. Nutrient uptake and biomass accumulation increased in uncut mature trees after the two selective harvests. There was no increase in stream-water NO3- or Alim concentrations, and so there were no adverse affects on macroinvertebrate or trout communities. The amount of tree biomass that can be removed without causing a sharp increase in stream-water NO3- and Alim stream-water concentrations is unknown, but probably depends on the history of forest-disturbance and acid deposition and the level of soil acidification. Results of this study indicate that macroinvertebrate and brook trout communities were sensitive to clearcutting and that deer browsing may affect water quality by suppressing forest regeneration and nutrient uptake. Further studies of selective harvests could identify the harvesting threshold below which changes in water quality and soil chemistry are minimized, and nutrient retention is maximized, thus reducing the damage that logging can inflict on stream and aquatic communities.

New York↗

Seismic hazards and land-use planning

Basic earth-science data are necessary for a realistic assessment of seismic hazards and as a basis for limiting corrective land-use controls only to those areas of greatest hazard. For example, the location, character, and amount of likely displacement and activity of surface faulting can be predicted if detailed geologic maps and seismic data are available and are augmented by field studies at critical localities. Because few structures can withstand displacement of their foundations, they should be located off active fault traces, the distance varying with the character of faulting, the certainty with which fault traces are known, and the importance of the structure. Recreational activities and other nonoccupancy land uses should be considered for fault zone areas where land is under pressure for development; elsewhere, such areas should remain as open space. Two methods of predicting ground shaking effects have applications to land-use decisions: (1) Relative earthquake effects can be related to firmness of the ground and can be used in a gross way to allocate population density in the absence of more sophisticated analyses; and (2) intensity maps, based on, (a) damage from former earthquakes, or (b) a qualitative analyses of geologic units added to a design earthquake, can be helpful both for general and specific plans. Theoretical models are used with caution to predict ground motion for critical structures to be located at specific sites with unique foundation conditions. Fully adequate methods of assessing possible shaking remain to be developed. Where land-use decisions do not reflect likely ground shaking effects, stringent building codes are needed, particularly for important structures. Ground failure (landsliding, ground cracking and lurching, differential settlement, sand boils, and subsidence) commonly results from liquefaction, loss of soil strength, or compaction. Areas suspected of being most likely to fail should not be developed unless detailed site studies can demonstrate the hazard does not exist or can be overcome. Various methods can be used to reduce the high, long-term public costs that follow development of unstable ground. However, areas subject to tectonic deformation generally cannot be predicted nor can effects of such deformation be minimized. Large water waves, such as produced by tsunamis, seiches, and dam failure or overtopping, can be anticipated in many places. Their effects can be lessened by land-use regulations similar to flood-plain zoning, restrictions on location of critical structures, and appropriate warning systems. Many local, state, and federal government agencies, universities, and private consultants may be able to assist planners by advising them of pertinent data and where those data can be obtained. Interpretation of the data for an evaluation of seismic risk commonly requires a team of planners, geologists, and soil and structural engineers.

Circular↗

Conditions favouring Bromus tectorum dominance of endangered sagebrush steppe ecosystems

1. Ecosystem invasibility is determined by combinations of environmental variables, invader attributes, disturbance regimes, competitive abilities of resident species and evolutionary history between residents and disturbance regimes. Understanding the relative importance of each factor is critical to limiting future invasions and restoring ecosystems. 2. We investigated factors potentially controlling Bromus tectorum invasions into Artemisia tridentata ssp. wyomingensis communities across 75 sites in the Great Basin. We measured soil texture, cattle grazing intensity, gaps among perennial plants and plant cover including B. tectorum, biological soil crusts (BSCs) and bare soil. Using a priori knowledge, we developed a multivariate hypothesis of the susceptibility of Artemisia ecosystems to B. tectorum invasion and used the model to assess the relative importance of the factors driving the magnitude of such invasions. 3. Model results imply that bunchgrass community structure, abundance and composition, along with BSC cover, play important roles in controlling B. tectorum dominance. Evidence suggests abundant bunchgrasses limit invasions by limiting the size and connectivity of gaps between vegetation, and BSCs appear to limit invasions within gaps. Results also suggest that cattle grazing reduces invasion resistance by decreasing bunchgrass abundance, shifting bunchgrass composition, and thereby increasing connectivity of gaps between perennial plants while trampling further reduces resistance by reducing BSC. 4. Synthesis and applications. Grazing exacerbates Bromus tectorum dominance in one of North America's most endangered ecosystems by adversely impacting key mechanisms mediating resistance to invasion. If the goal is to conserve and restore resistance of these systems, managers should consider maintaining or restoring: (i) high bunchgrass cover and structure characterized by spatially dispersed bunchgrasses and small gaps between them; (ii) a diverse assemblage of bunchgrass species to maximize competitive interactions with B. tectorum in time and space; and (iii) biological soil crusts to limit B. tectorum establishment. Passive restoration by reducing cumulative cattle grazing may be one of the most effective means of achieving these three goals.

Journal of Applied Ecology↗