Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

The northwest trending north Boquerón Bay-Punta Montalva Fault Zone; A through going active fault system in southwestern Puerto Rico

The North Boquerón Bay–Punta Montalva fault zone has been mapped crossing the Lajas Valley in southwest Puerto Rico. Identification of the fault was based upon detailed analysis of geophysical data, satellite images, and field mapping. The fault zone consists of a series of Cretaceous bedrock faults that reactivated and deformed Miocene limestone and Quaternary alluvial fan sediments. The fault zone is seismically active (local magnitude greater than 5.0) with numerous locally felt earthquakes. Focal mechanism solutions suggest strain partitioning with predominantly east–west left-lateral displacements with small normal faults striking mostly toward the northeast. Northeast-trending fractures and normal faults can be found in intermittent streams that cut through the Quaternary alluvial fan deposits along the southern margin of the Lajas Valley, an east–west-trending 30-km-long fault-controlled depression. Areas of preferred erosion within the alluvial fan trend toward the west-northwest parallel to the onland projection of the North Boquerón Bay fault. The North Boquerón Bay fault aligns with the Punta Montalva fault southeast of the Lajas Valley. Both faults show strong southward tilting of Miocene strata. On the western end, the Northern Boquerón Bay fault is covered with flat-lying Holocene sediments, whereas at the southern end the Punta Montalva fault shows left-lateral displacement of stream drainage on the order of a few hundred meters.

Puerto Rico↗

Revised earthquake geology inputs for the central and eastern United States and southeast Canada for the 2023 National Seismic Hazard Model

It has been nearly a decade since updates to seismic and fault sources in the central and eastern United States (CEUS) were last assessed for the 2012 Central and Eastern United States Seismic Source Characterization for nuclear facilities (CEUS-SSCn) and 2014 United States Geological Survey National Seismic Hazard Model (NSHM) for the conterminous U.S. In advance of the 2023 NSHM update, we created 3 related geospatial databases to summarize and characterize new fault source information for the CEUS. These include fault section, fault-zone polygon, and earthquake geology (fault slip rate, earthquake recurrence intervals) databases which document updates to fault parameters used in prior seismic hazard models in this region. The 2012 CEUS-SSCn and 2014 NSHM fault models served as a foundation, as we revised and added fault sources where new published studies documented significant changes to our understanding of fault location, geometry, or activity. We added 9 new fault sections that meet the criteria of (1) a length ≥7 km, (2) evidence of recurrent Quaternary tectonic activity, and (3) documentation that is publicly available in a peer-reviewed source. The prior CEUS models only included 6 fault sections (sources) and 10 fault-zone polygons (previously called repeating large magnitude earthquake (RLME) polygons). The revised databases include 15 fault sections and 10 fault zone polygons. Updates to the faults constitute a 150% increase in fault sections, but no change in the number of fault-zone polygons, although some fault-zone polygons differ from RLME polygons used in prior models. No faults were removed from past models. Several seismic zones and suspected faults were evaluated but not included in this update due to a lack of information about fault location, geometry, or recurrent Quaternary activity. These updates to the fault sections, fault-zone polygons, and earthquake geology databases will inform fault geometry and activity rates of CEUS sources during the 2023 NSHM implementation.

Seismological Research Letters↗

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗

Neotectonic origins for the Meadow Bank scarp, Wabash Valley seismic zone USA

The Meadow Bank scarp (MBS) in southeastern Illinois is a linear geomorphic expression, ∼10 km long and ∼8 m high above a relatively flat landscape. It parallels an underlying northeast‐oriented Late‐Precambrian–Early‐Cambrian structural fabric, called the Wabash Valley fault zone, and is within an area of modern, historic, and paleo seismicity, called the Wabash Valley seismic zone. In addition, the MBS acts as a boundary of the Wabash River floodplain, as well as Pleistocene glacial outwash channels, which show evidence of frequent outburst flood events. To better understand the MBS’s equivocal origin in this complex geologic environment, we acquired a 917‐m‐long seismic‐reflection survey across its axis to assess the subsurface geologic configuration. The resultant image indicates a complex set of faults that antiformally fold and displace the top of Paleozoic bedrock by ∼12 m across the survey. Moreover, fault and/or fold deformation extends into the shallowest imaged Quaternary strata at ∼6 m below the ground surface. This suggests the MBS origin is related to underlying Quaternary reactivated, positively inverted faults rather than exclusively to glacial outburst flood erosion. These results provide rare paleoearthquake spatial constraints for central U.S. regional seismic hazard consideration.

Illinois↗

Geology and ground-water resources of Puerto Rico

Puerto Rico, the easternmost and smallest of the Greater Antilles, has an axis of deformed and metamorphosed volcanic rocks of Upper Cretaceous age, intruded by dioritic rocks during the Antillean revolution. The hard-rock core is flanked on the north and south by limestones and clastic rocks of late Oligocene and early Miocene age, which have been gently arched and uplifted. Similar rocks were deposited in late Miocene or early Pliocene time along the west coast. During the Quaternary the island has been separated from the other major Antillean islands by faulting and has been arched, uplifted, and tilted to the northeast. Alluvium and littoral deposits have partially filled the valleys and have formed coastal plains on the north and south. The Upper Cretaceous volcanic and associated rocks yield small supplies of water to wells in most places. The Tertiary limestones yield large supplies in some places on the north, south, and west coasts. The Quaternary sands and gravels are the most important aquifers. They yield about 200 million gallons a day to wells in the main south coastal plain alone. The water is used largely for irrigation. A total of perhaps 250 to 300 million gallons a day is pumped from wells in the island, and moderate to large additional supplies are available in some places.

Puerto Rico↗

The plumbotectonics of the West Shasta mining district, eastern Klamath Mountains, California

The tectonic setting comprising the West Shasta mining district has often been compared with that of primitive island arcs. Concentrations of uranium, thorium, and lead and lead isotope compositions were determined for Devonian ores and rocks of the West Shasta district, eastern Klamath Mountains, California, to help evaluate the tectonic classification. The lead isotope pattern is found to be complex. From comparison of the data with those on younger ores and rocks in the region and with those isotopic patterns found in modern tectonic terranes, however, a number of conclusions are possible. A lead isotope point for the Devonian oceanic mantle is now well established from this study on the West Shasta district. This isotopic composition is in agreement with that suggested by Slawson in 1983--i.e., from a sample of massive sulfide ore from the Golinsky deposit--with a 206 Pb/ 204 Pb of 17.830, a 207 Pb/ 204 Pb of 15.450, and a 208 Pb/ 204 Pb of 37.313. If the Devonian mantle is analogous to the modern mantle, the determined value is probably at the more radiogenic end of the Devonian oceanic mantle array.Some samples of volcanic rocks and ores that have elevated values of 207 Pb/ 204 Pb and 208 Pb/ 204 Pb indicate that subducted pelagic sediments or interaction of the magmas with other sediments downsection have been involved to varying degrees in the generation of magmas. The high ratios were not attained by addition of lead to the volcanic rocks or ores during subsequent magmatic events, such as intrusion of the Permian Pit River stock to the east or of the Cretaceous Shasta Bally batholith that crops out to the south and west and may underlie part of the district. Some values of 207 Pb/ 204 Pb are sufficiently high as to suggest that West Shasta may have developed nearer a continent than was previously supposed. Lead isotope data for Quaternary volcanic rocks are somewhat more radiogenic than for Cretaceous ores and plutonic rocks. Permo-Triassic ores are again a bit less radiogenic. The isotopic differences between the Permo-Triassic and Quaternary data could be accounted for by a value for 238 U/ 204 Pb of 10.42 in common source material. Using this value of 238 U/ 204 Pb to calculate even further back to 400 m.y., the resulting ratios are found to fall very close to the "best value" for the lead isotope mixing line between the Devonian mantle and pelagic sediments. We interpret this intersection to be the "mean value" for the assimilated Devonian sediment lead--18.250 for 206 Pb/ 204 Pb and 15.582 for 207 Pb/ 204 Pb. As deduced for the lead isotope composition for the Devonian mantle at this location, the pelagic sediment, lead isotope composition also is toward the more radiogenic end of the values expected for pelagic sediments in the Devonian. Lack of sediments in the observed volcanic section of the West Shasta district suggests a submerged volcanic-arc setting (as interpreted by others for the Troodos and Samail ophiolites) rather than an island-arc situation (such as the Green Tuff area of Japan) or an incipient spreading ridge setting (that might have grown to be a subaerial Iceland). The elevated values of 207 Pb/ 204 Pb for some samples suggest a submerged volcanic are whereas the exceedingly low values of thorium--which is not easily mobilized during alteration events--for both basaltic andesites and plagiorhyolites is suggestive of depleted source material such as is found for most oceanic spreading centers. Elevated values of 207 Pb/ 204 Pb are exceedingly rare in midocean ridge basalts and low contents of thorium are known in island arcs, so a submerged volcanic arc is the preferred interpretation. Some similarity exists between the 206 Pb/ 204 Pb values of Devonian ores having elevated values of 207 Pb/ 204 Pb and those of the Permo-Triassic ores of the East Shasta district, as mentioned by Slawson in 1983. This similarity is now confirmed to be a coincidence. We find it due first of all to some incorporation of sediment lead in the magmas, followed later by some migration of radiogenic lead--probably locally derived--into the ores during subsequent events. Because there was some postdepositional lead migration into the ores, some migration of copper also into the ores cannot be excluded. Lead, especially radiogenic lead, however, is more mobile than copper. As the migrating lead is deduced to have been locally derived from the observed section rather than exotically derived, any copper added was probably locally derived also.

Economic Geology↗

The Geysers-Clear Lake area, California: Thermal waters, mineralization, volcanism, and geothermal potential

Manifestations of a major thermal anomaly in the Geysers-Clear Lake area of northern California include the late Pliocene to Holocene Clear Lake Volcanics, The Geysers geothermal field, abundant thermal springs, and epithermal mercury and gold mineralization. The epithermal mineralization and thermal springs typically occur along high-angle faults within the broad San Andreas transform fault system that forms the western boundary of the North American plate in this area. The young volcanic rocks overlie Mesozoic marine rocks of the Great Valley sequence which have been thrust above the coeval Franciscan Complex and penecontemporaneously dropped back down along low-angle detachment faults.Many of the waters of the region are nonmeteoric as defined by their isotopic signature. One type of isotopically shifted water emerges from or near Great Valley sequence rocks and is the most chloride rich. It is interpreted to be evolved connate in origin. A second type, evolved meteoric water, has moderate chloride contents, high boron contents, and high B/Cl ratios and is found locally in Franciscan rocks, notably at the Sulphur Bank mercury mine, where it probably results from near-closed-system, repeated boiling of meteoric water in host rocks that also contribute organic components to the water. At the Sulphur Bank mine fracturing of otherwise impermeable Franciscan rocks by faulting has created a localized zone of permeability in which thermal water boils repeatedly with limited venting to the surface. Boron-rich fluids were apparently present at depth in The Geysers geothermal field when intrusion of silicic magma occurred, because the concealed intrusion of felsite is surrounded by a halo of tourmaline-bearing hornfels. The volume of this poorly dated early to middle Quaternary intrusive body probably exceeds the 100 km 3 of erupted Clear Lake Volcanics. Similar intrusions may have occurred in the eastern part of the area at Wilbur Springs and the McLaughlin mine, where gold deposition and evidence of hydrothermal phenomena suggest more magmatic activity than is indicated by the small exposed bodies of early Quaternary basaltic lava. The Clear Lake Volcanics are the present locus of volcanism in the northern Coast Ranges and progressively older volcanic centers occur to the south. Geophysical data suggest that a large silicic magma body may be centered north of The Geysers steam field, providing the heat for the geothermal field.Geothermal power production has peaked at The Geysers and pressure declines indicate significant depletion of the fluid resource. The vapor-dominated field evolved from a preexisting hydrothermal system within fractured, otherwise impermeable Franciscan metamorphic rocks. A deep water table of saline fluid has been postulated to be present under the steam field, but no chloride-rich water has been found at drillable depth. We propose that recently discovered, isotopically shifted steam in the northwest Geysers area indicates the presence not of deep connate water but xather of boiled-down, boron-rich Franciscan evolved meteoric water. This water is likely to be present in limited quantities and will not provide a significant hot water resource for geothermal power production at The Geysers field or from the main Clear Lake volcanic field.

Economic Geology↗

Discovering blind geothermal systems in the Great Basin Region: An integrated geologic and geophysical approach for establishing geothermal play fairways: All phases

Most geothermal resources in the Great Basin region of the western USA are blind, and thus the discovery of new commercial-grade systems requires synthesis of favorable characteristics for geothermal activity. The geothermal play fairway concept involves integration of multiple parameters indicative of geothermal activity to identify promising areas for new development. This project integrated multiple datasets to apply the play fairway concept and assess geothermal potential in a large region of the Great Basin in Nevada. It is therefore referred to as the Nevada play fairway project. This project was a strong collaborative effort between several organizations, led by the Nevada Bureau of Mines and Geology at the University of Nevada, Reno, but with key support from the U.S. Geological Survey, ATLAS Geosciences, Inc,, Hi-Q Geophysical, Inc., Lawrence Berkeley National Laboratory, Utah Geological Survey, and Innovative Geothermal Ltd. In Budget Period 1 of this project, available data for nine geologic, geochemical, and geophysical parameters were initially synthesized to produce a new detailed geothermal potential map of 96,000 km2 from west-central to eastern Nevada (Figure 1). These parameters were grouped into subsets and individually weighted (Figure 2) to delineate rankings for local permeability, intermediate permeability, regional permeability, and thermal potential, which collectively defined geothermal play fairways (i.e., most likely locations for significant geothermal fluid flow). This initial work was aimed at reducing the risks in regional exploration and therefore facilitating discovery of new commercial-grade systems in blind settings, as well as in areas with surface expressions of geothermal activity. Budget Period 2 of the project involved detailed analysis of some of the most promising areas identified in Phase 1. Twenty-four highly prospective areas, including both known undeveloped systems and previously undiscovered potential blind systems, were identified for further analysis (Figures 3 and 4). After reconnaissance of these areas, five of the most promising sites were selected for detailed studies. Multiple techniques were employed in the detailed studies, including geologic mapping, shallow temperature surveys, gravity surveys, Lidar, geochemical studies, seismic reflection analysis, and 3D modeling. The goal of the detailed studies was to identify specific areas with the highest likelihood for high permeability and thermal fluids, such that drill sites could be targeted. Three main sets of predictive maps were generated for each detailed study area: 1) play fairway maps, 2) play fairway error maps, and 3) direct evidence maps. Local- and intermediate-scale permeability models were revised to reflect results of the detailed geologic, geophysical, and geochemical analyses. Budget Period 3 of the project involved more detailed geophysical analyses and temperature-gradient (TG) drilling in southeastern Gabbs Valley and northern Granite Springs Valley (Figure 4), deemed the two most promising sites, with the goal of providing preliminary validation of the play fairway methodology. In southeastern Gabbs Valley, the collocation of a favorable structural setting (displacement transfer zone and fault intersections), Quaternary faults, intersecting and terminating gravity gradients, magnetic low, shallow (2 m) temperature anomaly, low resistivity anomaly, and promising geothermometry from nearby water wells provided evidence for a blind system. Drilling of six TG holes defines an apparent geothermal system at this locality with temperatures as high as 124°C at 152 m. This system is blind, with no surface hot springs, fumaroles, or paleo-geothermal deposits. For northern Granite Springs Valley, a favorable structural setting (termination of a major Quaternary normal fault), terminating gravity gradient, magnetic gradient, newly discovered sinter deposits, nearby warm water wells, previously drilled TG holes in the vicinity, and promising geothermometry suggest a hidden system. Drilling of six new TG holes yields temperatures of ~96°C at ~250 m, suggesting the presence of a geothermal system. Major lessons learned in the course of this project include: 1) initially identified sites commonly include multiple favorable structural settings at a finer scale; 2) promising sites in Cenozoic basins cannot be recognized without detailed geophysical surveys; and 3) play fairway analysis should be refined as the exploration program vectors into the most promising sites and finer-scale data are acquired. In addition to producing copious amounts of data, this project resulted in 16 published papers, 10 abstracts, more than 40 presentations across the U.S. and abroad (including several keynote addresses), 2 Masters theses, and 7 media reports.

Nevada↗

The geological approach to dating archaeological sites

Abasic Question that must be answered for any archaeological site is, how old is it? Although some archaeological sites can be dated on the basis of archaeological correlations alone and although dendrochronological (Giddings, 1952, pp. 105-110) and radiocarbon methods give absolute ages for other sites , many sites can be dated only by methods based on the geologists' knowledge of geographic and climatic changes during the last few tens of thousands of years. The dates of these changes are established in part by radiocarbon and related methods. Study of archaeological sites accurately dated by radiocarbon methods will amplify the geologists' understanding of late Quaternary events. The well known techniques of dendrochronological and radiocarbon dating need no discussion. The interrelations of methods that depend ultimately on our knowledge of Quaternary climatic and geographic changes are not always well understood, however, by archaeologists. The present paper is intended to clarify some of these interrelations.

American Antiquity↗

Neotectonic mapping of Puerto Rico

Puerto Rico is part of the Puerto Rico-Virgin Islands microplate, along the Caribbean–North American plate boundary between the Puerto Rico trench subduction zone and the Muertos Trough incipient subduction zone. Despite recent seismicity and geodetically constrained deformation of ~3 mm/yr of left-lateral shear across the island, Quaternary fault locations remain largely uncertain. Preservation of recent faulting in the landscape is masked by distributed faulting, high weathering rates of the tropical climate, steep topography, frequent landsliding, and extensive agriculture and urbanization along coastlines and river valleys. We present remote neotectonic mapping of historical aerial imagery from the 1930s-60s and <1-m lidar topography, integrated with field observations, to create an updated active fault map of Puerto Rico. We focus on faults that offset younger geomorphic surfaces, with ages estimated by geologic mapping, OSL and radiocarbon dating, and morphologic interpretations. We present new evidence for Quaternary activity on seven faults, including the South Lajas, Salinas, Punta Montalva, Great Southern Puerto Rico, Cerro Goden, Parguera, and San Marcos faults. We find that active faulting occurs preferentially along the southern and western coasts and does not always spatially coincide with preexisting bedrock faults, possibly reflecting partial reactivation of older faults in the modern strain field.

Puerto Rico↗

The geology of Hess Rise, central north Pacific Ocean

The geology of Hess Rise is interpreted from studies of morphology and structure, igneous petrology, sediment lithofacies, seismic stratigraphy, and paleoenvironments. Hess Rise probably formed at a triple junction, between 116 and 95 m.y. ago, in the equatorial zone of the southern hemisphere. A large archipelago, formed by volcanism, subsequently moved northward as part of the Pacific Plate and subsided. A Late Cretaceous-early Tertiary tectonic and(or) volcanic event created oceanic islands and probably influenced the normal subsidence rate. The lithofacies reflect both the northward movement under various surface water masses of differing productivity and the subsidence history, which influenced calcareous-sediment accumulation and dissolution. Hess Rise is informally divided into three physiographic or morphologic provinces: northern Hess Rise, the central platform, and southern Hess Rise. Southern Hess Rise is further subdivided into the northwestern ridge, Mellish Bank, and the eastern ridge. The structure of Hess Rise is dominated by normal faults which bound grabens and horsts. The west and south boundaries of the rise are fault scarps. Most faults trend about 345 ° on northern Hess Rise, 039° to 060° on southern Hess Rise. Igneous rocks are tholeiitic basalt on northern Hess Rise at Site 464, and trachyte at Site 465 on southern Hess Rise. The tholeiite probably is not a mid-ocean-ridge basalt; more likely it is a transitional basalt erupted during off-ridge volcanism. The trachyte at Site 465 was erupted either in shallow water or subaerially; it represents a late-stage differentiate of alkali-basalt magma. Geochemically, the trachyte is similar to late-stage eruptives on many oceanic islands. The alkali basalt clasts in Upper Cretaceous calcareous ooze at Site 466 probably record a Late Cretaceous-early Tertiary tectonic event that brought old crust above sea level, where it was eroded; alternatively, volcanism may have built the islands. Cores recovered from Holes 464, 310, 310A, 465,465A, and 466 (north to south) show three major lithofacies: limestone of mid-Cretaceous (Albian-Cenomanian) age, calcareous ooze and chalk of Late Cretaceous to Quaternary age, and pelagic clay that is Late Cretaceous to Quaternary in age at Site 464 and Eocene in age at Site 310. Minor lithofacies in the carbonates and pelagic clay include siliceous microfossils and chert. The limestone contains as much as 8.6% by weight of organic carbon. The organic-carbon-rich sediments apparently were deposited along the sides of Hess Rise, above the CCD and within a mid-water oxygen minimum, as the rise crossed the highly productive equatorial divergence. Surface sediments are influenced by present-day near-surface water-mass productivity and the depth of deposition. Above about 3000 meters calcareous ooze is deposited, and below about 4000 meters pelagic clay is dominant. Between 3000 meters and 4000 meters, greater clay contents correlate with increased water depth. The seismic stratigraphy interpreted from single-channel seismic-reflection records can be correlated with the lithofacies. Three major acoustic units apparently vary in age, composition, thickness, and geographic distribution. The lowest acoustic unit generally is acoustically opaque; it corresponds to volcanic basement. In places, however, the top parts of this unit may be well-lithified limestone or chert. The middle acoustic unit, in general strongly layered acoustically, is Albian and Cenomanian limestone, chalk, and chert on southern Hess Rise and Albian and Cenomanian chert, chalk, limestone, and clay stone on northern Hess Rise. The middle unit probably is Albian to at least lower Tertiary chalk, chert, and nannofossil ooze on the central platform. The upper acoustic unit is weakly stratified to acoustically transparent and corresponds to Upper Cretaceous to Recent nannofossil ooze on southern Hess Rise and to pelagic clay of the same age on northern Hess Rise. On the central platform, it probably corresponds to Eocene to Recent nannofossil ooze, marl, and pelagic clay

Initial Reports of the D.S.D.P.↗

Carbonate and organic-carbon cycles and the history of upwelling at Deep Sea Drilling Project Site 532, Walvis Ridge, South Atlantic Ocean

Detailed carbonate and organic-carbon stratigraphies were constructed from samples collected every 20 cm in a 250-m hydraulic piston core recovered at DSDP Site 532 on Walvis Ridge. This sampling interval represents about one sample every 5000 yr., based on sediment accumulation rates calculated from nannofossil biostratigraphic zones. All samples were analyzed for percent CaCO 3 , resulting in a detailed carbonate stratigraphy for the past 5.0 m.y. The samples for the top 110 m of section were also analyzed for organic carbon in order to construct a detailed organiccarbon stratigraphy for the last 2.5 m.y. The recovered section has distinct dark-light color cycles with average periodicities of 55, 58, and 30 k.y. for the Quaternary, upper Pliocene, and lower Pliocene, respectively. Periodicities of carbonate cycles are similar to the color cycles; most carbonate minima correspond to the dark parts of color cycles. The average periodicity for carbonate cycles is about 36 k.y. Darker parts of color cycles usually contain higher concentrations of organic carbon, but the organic-carbon record does not follow the cyclicity of the color cycles in detail, at least for the last 2.5 m.y. Organic-carbon cycles have an average periodicity of about 34 k.y. for the Quaternary and upper Pliocene. The cycles of CaCO 3 and color have periodicities similar to those reported from carbonate stratigraphies from the northeast Atlantic, Caribbean, and eastern equatorial Pacific. The carbonate cycles at Site 532 are the result of external forcing, probably related to global climate, that affected fluctuations in both sediment supply from the African continental margin and productivity of siliceous organisms. The organic-carbon cycles have similar periodicities and similar changes in periodicities to those of the CaCO 3 cycles. Semiquantitative estimates of diatom abundance from smear slides and concentrations of biogenic SiO 2 calculated from chemical analyses suggest that upwelling at Site 532 was minor until about 3 m.y. ago. The Benguela-Current upwelling system either began at that time or, more likely, migrated into the area of Site 532, where it prevailed until some time between about 1.2 and 0.5 m.y. ago. The increase and decline of upwelling in the area of Site 532, however, did not disturb the trend of cyclicities of carbonate and organic carbon. The latest change in conditions at Site 532 was an increase in intensity of bottom currents during the past 0.5 m.y. that winnowed nannofossils, diatoms, and clay and left a lag deposit represented by a foraminifer-rich fades

Initial Reports of the D.S.D.P.↗

Summary of ground-water quality in West Virginia

Water-quality data for the 28 sites in the West Virginia ambient ground-water-quality network and for wells in the U.S. Geological Survey National Water Information System (NWIS) data base for West Virginia were analyzed statistically to identify any water-quality trends and relations and to compare data from the two data sets. Data for 10 selected properties and constituents (pH, fecal coliform, iron, manganese, sulfate, hardness, nitrate plus nitrite, chloride, fluoride, and dissolved solids) were grouped by geologic unit, topographic setting, well depth, and season; simple statistical descriptors such as mean, median, maximum, minimum, standard deviation, and 10th and 90th percentiles were computed for each property and constituent and are summarized in tables. Analysis of the data for wells from the NWIS data base showed that highest median concentrations of dissolved iron and dissolved manganese are in samples from the Lower Pennsylvanian units, which are found mainly in the low-sulfur coal fields of southern West Virginia; the highest median concentration of dissolved sulfate is in samples from the Quaternary alluvium along the Ohio and Kanawha Rivers; and the highest median hardness and concentrations of dissolved nitrate plus nitrite are in samples from the Cambrian and Ordovician karst limestone units found mainly in the Eastern Panhandle. The highest median concentrations of dissolved iron and dissolved manganese are in samples from valley wells and wells of shallow depth, and hardness is greatest in samples from hilltop wells. Analysis of data for all wells and springs in the ambient network corroborated statistics for the NWIS data set in that median concentration of total iron is highest in samples from the Lower Pennsylvanian units, median concentration of dissolved sulfate is highest in samples from the Quaternary alluvium, and hardness and median concentrations of total nitrate plus nitrite are highest in samples from the Cambrian and Ordovician units. Data from the ambient network did not show any significant seasonal variations in groundwater quality. Of the additional constituents sampled for in the ambient network, median concentrations of metals were less than U.S. Environmental Protection Agency drinking-water standards, and organic chemical constituents were rarely detected. Statistical comparisons of data from the NWIS data base and the ambient network data set showed no significant differences except for fecal coliform, iron, and manganese. Median concentrations of these three constituents were several times greater for samples from wells and springs in the ambient network. Statistical differences in values for these constituents could be attributed to differences in the state of constituents sampled (dissolved concentrations of iron and manganese for the NWIS data set as opposed to total concentrations for the ambient network data set) and the smaller number of sites in the ambient network. Statistical resolution could be improved by sampling a greater number of wells and springs that have a greater diversity of geologic and topographic conditions for the ambient network. The present ambient network does not include sites in Silurian or Middle Pennsylvanian geologic units nor sites in hilltop settings. The statistical validity of the ambient network could be improved by sampling additional sites, especially those for aquifers underrepresented in the data set.

West Virginia↗

Geologic framework of the Alaska Peninsula, southwest Alaska, and the Alaska Peninsula terrane

The Alaska Peninsula is composed of the late Paleozoic to Quaternary sedimentary, igneous, and minor metamorphic rocks that record the history of a number of magmatic arcs. These magmatic arcs include an unnamed Late Triassic(?) and Early Jurassic island arc, the early Cenozoic Meshik arc, and the late Cenozoic Aleutian arc. Also found on the Alaska Peninsula is one of the most complete nonmetamorphosed, fossiliferous, marine Jurassic sedimentary sections known. As much as 8,500 m of section of Mesozoic sedimentary rocks record the growth and erosion of the Early Jurassic island arc. A thinner, but still thick (as much as 5,400 m), sequence of Tertiary sedimentary rocks that are predominantly continental overlies the Mesozoic section. A brief regression in early Tertiary time on the Alaska Peninsula and granodiorite plutonism in the Shumagin, Semidi, and Sanak Islands was followed by deposition of fluvial and minor marine clastic strata. This was followed by deposition of transgressive marine clastic strata and initiation of the Meshik arc, shown by an areally extensive outpouring of volcanic and volcaniclastic rocks and debris between late Eocene and earliest Miocene time. Late Miocene time was marked by another brief transgression and northwest- to southeast-directed compression, followed by renewed volcanism and plutonism which initiated the modern Aleutian magmatic arc. Extensive glacial and glaciomarine deposits of late Pleistocene age create an extensive lowland physiographic province on the northwest side of the Alaska Peninsula and join isolated mountain masses to the Alaska Peninsula on the southwest. Multiple active volcanoes and volcanic peaks dominate the skyline of the Alaska Peninsula and represent the continuation of magmatic activity that has formed the Aleutian arc since late Miocene time. The Alaska Peninsula has had a long and involved history since Paleozoic time. We propose that the Paleozoic and Mesozoic rocks that constitute much of the Alaska Peninsula be called the Alaska Peninsula terrane. Using the concept of subterranes, we divide the terrane into two distinct but tectonically related subterranes: the Chignik and Iliamna subterranes, which share a limited common geologic history. The Iliamna subterrane has served at most times as a source area for the Chignik subterrane; however, some rock units are in common across the subterranes. The Iliamna and Chignik subterranes are in part separated by the Bruin Bay fault system. The Iliamna subterrane is composed of moderately deformed early Mesozoic marine sedimentary and volcanic rocks and schist, gneiss, and marble of Paleozoic(?) and Mesozoic age, and plutonic rocks of the Alaska-Aleutian Range batholith. Characteristic of the Chignik subterrane are little-deformed, shallow-marine to continental clastic sedimentary rocks ranging in age from Permian to latest Cretaceous. However, deep-marine, volcaniclastic, and calcareous rocks form important components of the older rocks in the subterrane. The two subterranes of the Alaska Peninsula terrane are characterized by radically different structural and metamorphic styles. The nonplutonic rocks of the Iliamna subterrane are characterized by metamorphism up to amphibolite-facies grade and intense folding. In the Chignik subterrane, the structural style is dominated by large, open, en echelon anticlinal structures, normal faulting, and thrust and high-angle reverse faults that have minor displacement in a northwest to southeast direction. In the Outer Shumagin and Sanak Islands, rocks assigned to the Chugach terrane are characterized structurally by tight, generally northeast-trending folds. Dips in these rocks tend to be steep, rarely less than 35&deg;, and overturned beds are locally common. The boundaries separating the Alaska Peninsula terrane from other terranes are commonly indistinct or poorly defined. A few boundaries have been defined at major faults, although the extensions of these faults are speculative through some areas. The west side of the Alaska Peninsula terrane is overlapped by Tertiary sedimentary and volcanic rocks and Quaternary deposits.

Alaska↗

Mineral and energy resources of the Roswell Resource Area, East-Central New Mexico

The sedimentary formations of the Roswell Resource Area have significant mineral and energy resources. Some of the pre-Pennsylvanian sequences in the Northwestern Shelf of the Permian Basin are oil and gas reservoirs, and Pennsylvanian rocks in Tucumcari Basin are reservoirs of oil and gas as well as source rocks for oil and gas in Triassic rocks. Pre-Permian rocks also contain minor deposits of uranium and vanadium, limestone, and gases. Hydrocarbon reservoirs in Permian rocks include associated gases such as carbon dioxide, helium, and nitrogen. Permian rocks are mineralized adjacent to the Lincoln County porphyry belt, and include deposits of copper, uranium, manganese, iron, polymetallic veins, and Mississippi-Valley-type lead-zinc. Industrial minerals in Permian rocks include fluorite, barite, potash, halite, polyhalite, gypsum, anhydrite, sulfur, limestone, dolomite, brine deposits (iodine and bromine), aggregate (sand), and dimension stone. Doubly terminated quartz crystals, called 'Pecos diamonds' and collected as mineral specimens, occur in Permian rocks along the Pecos River. Mesozoic sedimentary rocks are hosts for copper, uranium, and small quantities of gold-silver-tellurium veins, as well as significant deposits of oil and gas, carbon dioxide, asphalt, coal, and dimension stone. Mesozoic rocks contain limited amounts of limestone, gypsum, petrified wood, and clay. Tertiary rocks host ore deposits commonly associated with intrusive rocks, including platinum-group elements, iron skarns, manganese, uranium and vanadium, molybdenum, polymetallic vein deposits, gold-silver-tellurium veins, and thorium-rare-earth veins. Museum-quality quartz crystals are associated with Tertiary intrusive rocks. Industrial minerals in Tertiary rocks include fluorite, vein- and bedded-barite, caliche, limestone, and aggregate. Tertiary and Quaternary sediments host important placer deposits of gold and titanium, and occurrences of silver and uranium. Important industrial commodities include caliche, limestone and dolomite, and aggregate. Quaternary basalt contains sub-ore-grade uranium, scoria, and clay deposits.

New Mexico↗

Oligocene–Miocene Maykop/Diatom Total Petroleum System of the South Caspian Basin Province, Azerbaijan, Iran, and Turkmenistan

The South Caspian Basin encompasses the southern extension of the Caspian Sea, including land areas in eastern Azerbaijan, western Turkmenistan, and northern Iran. The region is endowed with abundant petroleum resources, and oil and gas production has played an important commercial role in the region for more than 150 yr, especially in Azerbaijan and to a lesser extent in Turkmenistan. Major oil reserves are concentrated in 2,500–3,500 m of shallow-marine, deltaic to lacustrine deposits of middle Pliocene age. To date, some 620 oil and gas fields have been discovered in strata ranging in age from Miocene to Quaternary; however, less than a dozen fields produce from both Miocene and Quaternary reservoirs. The principal reserves and targets for future exploration are in the middle Pliocene Productive Series. The South Caspian Basin is unusual in several respects: sediment accumulated at exceptionally high rates (as high as 4.5 km/m.y.); sediment accumulation in each of three depocenters was as great as 20 km (5 km of Pliocene sedimentary deposits); there was low sediment compaction; geothermal gradients are relatively low (1.5°C/100 m); and abnormally high pressures exist in some basin areas. In this depositional environment, good reservoir porosities and permeabilities could be preserved to depths as great as 12 km. Analysis of source rock samples collected from outcrops, cores, and mud-volcano ejecta shows total organic carbon contents to range from 1.2 to more than 10 percent, the richest being in the middle part of the Oligocene–Miocene Maykop Series. Source rocks, with thicknesses ranging from 100 m to more than 2,500 m, form the cores of many anticlines in the basin. Reservoir rocks, consisting of fluviodeltaic clastic deposits ranging in texture from mudstone to conglomerate, are mostly in the middle Pliocene Productive Series, but some Miocene and lower Pliocene reservoirs are also present. Reservoir seals are formed by interbedded shales. Hydrocarbon traps developed mainly during the late Pliocene and early Pleistocene. The Oligocene–Miocene Maykop/Diatom Total Petroleum System within the South Caspian Basin is separated into five hydrocarbon assessment units: Apsheron-Pribalkhan Zone, Lower Kura Depression and Adjacent Shelf, Gograndag-Okarem Zone, Central Offshore, and Iran Onshore-Nearshore.

Bulletin↗

Manganese Deposits in the Artillery Mountains Region, Mohave County, Arizona

The manganese deposits of the Artillery Mountains region lie within an area of about 25 square miles between the Artillery and Rawhide Mountains, on the west side of the Bill Williams River in west-central Arizona. The richest croppings are on the northeast side of this area, among the foothills of the Artillery Mountains. They are 6 to 10 miles from Alamo. The nearest shipping points are Congress, about 50 miles to the east, and Aguila, about 50 miles to the southeast. The principal manganese deposits are part of a sequence of alluvial fan and playa material, probably of early Pliocene age, which were laid down in a fault basin. They are overlain by later Pliocene (?) basalt flows and sediments and by Quaternary basalt and alluvium. The Pliocene (?) rocks are folded into a shallow composite S1ncline ttat occupies the valley between the Artillery and Rawhide Mountains, and the folded rocks along either side of the valley, together with the overlying Quaternary basalt, are broken by faults that have produced a group of horsts, grabens, and step-fault blocks. The manganiferous beds, lie at two zones, 750 to 1,000 feet apart stratigraphically, each of which is locally as much as 300 to 400 feet thick. The main, or upper, zone contains three kinds of ore - sandstone ore, clay ore, and 'hard' ore. The sandstone and clay ores differ from the associated barren sandstone and clay, with which they are interlayered and into which they grade, primarily in containing a variable proportion of amorphous manganese oxides, besides iron oxides and clayey material such as are present in the barren beds. The 'hard' ore is sandstone that has been impregnated with opal and calcite and in which the original amorphous manganese oxides have been largely converted to psilomelane and manganite. The average manganese content of the sandstone and clay ores is between 3 and 4 percent and that of the 'hard' ore is between 6 and 7 percent. The ore contains an average of 3 percent of iron, 0.08 percent of phosphorus, 1.1 percent of barium, and minute quantities of copper, lead, and zinc. Although the manganese content of the sandstone and clay ore may change abruptly from bed to bed, the content within any individual bed changes gradually, and for any large volume of ore both the nanganese and iron content are remarkably uniform. Explorations to June 1941 consisted chiefly of 49 holes diamond-drilled in the upper zone on the Artillery Mountains side of the area. The district is estimated to contain an assured minimum of 200,000,000 tons of material having an average manganese content of 3 to 4 percent. About 20,000,000 tons of this total contains 5 percent or more of manganese, and 2,000,000 to 3,000,000 tons contains 10 percent or more. To what extent these deposits can be utilized is a metallurgical and economic problem. Although the clay and sandstone ores, as well as the 'hard' ore, are present in large tonnages, the 'hard' ore is the only kind that combines minable tonnage with promising grade. About 15,000,000 tons of 'hard' ore is present; about 500,000 tons of this contains 15 percent or more of manganese and averages 17 percent, and somewhat over 2,000,000 tons contains 10 percent or more and averages nearly 13 percent. Except for closer drilling to determine such things as the tonnage, grade, spacing, and form of the richer shoots with greater accuracy before beginning to mine them, further explorations are not recommended, for any new ore found is likely to be similar, both in grade and kind, to that already discovered.

Arizona↗

Geologic and hydrologic characterization and evaluation of the Basin and Range Province relative to the disposal of high-level radioactive waste: Part II, Geologic and hydrologic characterization

The geology and hydrology of the Basin and Range Province of the western conterminous United States are characterized in a series of data sets depicted in maps compiled for evaluation of prospective areas for further study of geohydrologic environments for isolation of high-level radioactive waste. The data sets include: (1) Average precipitation and evaporation; (2) surface distribution of selected rock types; (3) tectonic conditions; and (4) surface- and ground -water hydrology and Pleistocene lakes and marshes. Rocks mapped for consideration as potential host media for the isolation of high-level radioactive waste are widespread and include argillaceous rocks, granitic rocks, tuffaceous rocks, mafic extrusive rocks, evaporites, and laharic breccias. The unsaturated zone, where probably as thick as 150 meters (500 feet), was mapped for consideration as an environment for isolation of high-level waste. Unsaturated rocks of various lithologic types are widespread in the Province. Tectonic stability in the Quaternary Period is considered the key to assessing the probability of future tectonism with regard to high-level radioactive waste disposal. Tectonic conditions are characterized on the basis of the seismic record, heat-flow measurements, the occurrence of Quaternary faults, vertical crustal movement, and volcanic features. Tectonic activity, as indicated by seismicity, is greatest in areas bordering the western margin of the Province in Nevada and southern California, the eastern margin of the Province bordering the Wasatch Mountains in Utah and in parts of the Rio Grande valley. Late Cenozoic volcanic activity is widespread, being greatest bordering the Sierra Nevada in California and Oregon, and bordering the Wasatch Mountains in southern Utah and Idaho. he arid to semiarid climate of the Province results in few perennial streams and lakes. A large part of the surface drainage is interior and the many closed basins commonly are occupied by playas or dry lake beds. The Province is divided into ground-water flow units defined on the basis of ground-water divides, ground-water flow lines, and surface streams that receive ground-water discharge. Ground water contains less than 500 milligrams per liter of dissolved solids throughout most of the Province. Ground water is more mineralized in areas underlain by evaporitic rocks, overlain by playas, and near saline lakes. Ground water is of the calcium, magnesium, or sodium bicarbonate type in the areas where dissolved-solids concentrations are less than 500 milligrams per liter, and of the calcium, magnesium, or sodium sulfate or chloride type where dissolved-solids concentrations are greater than 500 milligrams per liter. Geologic and hydrologic evidence is found for about 100 lakes and marshes that existed during the Pleistocene Epoch. The possibility of a recurrence of pluvial conditions, such as existed in the Pleistocene, is of concern in repository siting because of possible changes in hydrologic conditions. The Pleistocene lakes and marshes provide clues to the hydrology during pluvial climates.

Arizona, California, Idaho, Nevada, New Mexico, Or↗