Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Stages”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources

Geographic variation in migratory behavior of greater white-fronted geese ( Anser albifrons )

We studied the migration and winter distribution of adult Greater White-fronted Geese ( Anser albifrons frontalis ) radio-marked on the Yukon-Kuskokwim Delta (YKD) and Bristol Bay Lowlands (BBL) of Alaska from 1987 to 1992. The major autumn staging site for geese from both breeding areas was the Klamath Basin on the California/Oregon border. However, temporal use of this area differed markedly between populations. Geese from the BBL arrived at the Klamath Basin nearly 30 days before geese from the YKD and departed before most YKD geese had arrived. Ninety percent of BBL geese used the Klamath Basin in autumn, whereas 30% of YKD geese bypassed the Klamath Basin during autumn and instead flew directly to the Central Valley of California. Nearly all BBL geese migrated directly from the Klamath Basin to wintering areas in Mexico, bypassing the Central Valley. Ninety percent of the BBL geese wintered in Mexico, as opposed to <20% of the YKD geese. Wetlands of the Interior Highlands in the state of Chihuahua, particularly Laguna Babicora, were used by >90% of the radio-marked geese in Mexico. Marshes along the West Coast comprised the other important wintering habitat in Mexico. The Sacramento Valley of California was the predominant wintering area for YKD geese. BBL geese migrated north from Mexico into the San Joaquin Valley or Sacramento-San Joaquin Delta of California by the last week of January. Fifty-five percent of the BBL population used the Klamath Basin in spring, but many birds staged in eastern Oregon and western Idaho. In contrast, geese from the YKD staged almost exclusively in the Klamath Basin during spring before flying to staging areas in Alaska. Breeding allopatry and temporal partitioning on staging and wintering areas likely has contributed to the evolution of previously described phenotypic differences between these populations. These two populations, along with the Tule Greater White-fronted Goose (A. a. gambeli), may constitute a portion of a Rassenkreis, a group of subspecies connected by clines, each ecotype of which has independent conservation needs.

The Auk↗

The evolution of volcano-hosted geothermal systems based on deep wells from Karaha-Telaga Bodas, Indonesia

Temperature and pressure surveys, fluid samples, and petrologic analyses of rock samples from deep drill holes at the Karaha - Telaga Bodas geothermal field on the volcanic ridge extending northward from Galunggung Volcano, West Java, have provided a unique opportunity to characterize the evolution of an active volcano-hosted geothermal system. Wells up to 3 km in depth have encountered temperatures as high as 353??C and a weakly altered granodiorite that intruded to within 2 to 3 km of the surface. The intrusion is shallowest beneath the southern end of the field where an acid lake overlies a nearly vertical low resistivity structure (<10 ohm-m) defined by magnetotelluric measurements. This structure is interpreted to represent a vapor-dominated chimney that provides a pathway to the surface for magmatic gases. Four distinct hydrothermal mineral assemblages document the evolution of the geothermal system and the transition from liquid- to vapor-dominated conditions. The earliest assemblage represents the initial liquid-dominated system generated during emplacement of the granodiorite between 5910 ?? 76 and 4200 ?? 150 y BP. Tourmaline, biotite, actinolite, epidote and clay minerals were deposited contemporaneously at progressively greater distances from the intrusive contact (assemblage 1). At 4200 ?? 150 y BP, flank collapse and the formation of the volcano's crater, Kawah Galunggung, resulted in catastrophic decompression and boiling of the hydrothermal fluids. This event initiated development of the modern vapor-dominated regime. Chalcedony and then quartz were deposited as the early low salinity liquids boiled (assemblage 2). Both vapor- and liquid-rich fluid inclusions were trapped in the quartz crystals. Liquid-rich fluid inclusions from the southern part of the field record salinities ranging from 0 to 26 weight percent NaCl- CaCl2 equivalent and locally contain fluorite daughter crystals. We suggest, based on temperature-salinity relationships and evidence of boiling, that these fluids were progressively concentrated as steam was lost from the system. However, mixing with fluids derived from the underlying intrusion or generated during the formation of acid SO4 water on the vapor-dominated chimney margins could have contributed to the observed salinities. As pressures declined, CO2- and SO4-rich steam-heated water drained downward, depositing anhydrite and calcite (assemblage 3) in the fractures, limiting further recharge. Fluid inclusions with salinities up to 31 weight percent NaCl equivalent were trapped in these minerals as the descending water vaporized. The final assemblage is represented by precipitates of NaCl, KCl and FeClx deposited on rock surfaces in portions of the vapor-dominated zone that boiled dry. Vapor-dominated conditions extend over a distance of at least 10 km and to depths below sea level. Deep wells drilled into the underlying liquid-dominated reservoir in the northern and central part of the volcanic ridge produce low salinity fluids representing recent recharge of meteoric and steam-heated water. The evolution of volcanic-hosted vapor-dominated geothermal systems can be described by a five stage model. Stage 1 involves the formation of an over-pressured liquid-dominated geothermal system soon after magmatic intrusion. In Stages 2 and 3, pressures progressively decrease, and a curtain of steam-heated water surrounding a magmatic vapor-dominated chimney at 350??C and 14 ?? 2 MPa develops. The relatively low pressure near the base of the chimney causes liquid inflow adjacent to the intrusion and the development of a secondary marginal vapor-dominated zone. In Stage 4, the magmatic vapor discharge from the intrusion becomes small, vapor pressure declines, and the secondary vapor-dominated zone expands above the intrusion. In Stage 5, the vapor-dominated zone floods because heat from the intrusion is insufficient to boil all liquid inflow. A more common, liquid-dominated volcanic-hosted system the

American Journal of Science↗

Cyclic fluctuations of water level as a basis for determining aquifer transmissibility

In coastal areas, wells near bodies of tidal water frequently exhibit sinusoidal fluctuations of water level, in response to periodic changes of tidewater stage. Inland, the regulation of a surface reservoir often produces correlative changes of ground-water stage in wells adjacent either to the reservoir or to its attendant stream. As the stage of the surface water rises, the head upon the subaqueous outcrop of the aquifer increases and thereby either increases the rate of inflow to the aquifer or reduces the rate of outflow therefrom. The increase in recharge or reduction in discharge results in a general recovery of water level in the aquifer. On the subsequent falling stage this pattern is reversed. When the stage of the surface body fluctuates as a simple harmonic motion a train of sinusoidal waves is propagated shoreward through the sub-outcrop of the aquifer. With increasing distance from the sub-outcrop, the amplitude of the transmitted wave decreases and the time lag of a given maximum or minimum increases.

Report↗

The history of stream gaging in Ohio

Introduction Streams are a natural resource that can influence economic growth and the development of communities. They supply water for many uses, provide habitat for aquatic plants and animals, and sup-port recreational activities such as boat-ing and fishing. The amount of water (flow) in a stream — either too little or too much — can seriously affect these uses and human life. By using a method called stream gaging , information about the flow in a stream and the fluctuations in that flow can be obtained. n its simplest form, stream gaging may consist of measuring any number of the following stream characteristics: stage (or depth), cross-sectional area, velocity, and (or) flow (or discharge). When the depth and velocity are measured at several points across the stream channel so that the flow (or discharge ) is calculated, a streamflow measurement (or discharge measurement ) is made. By making streamflow measurements at the same site on a stream over a wide range of stages, a relation between stage and discharge can be developed. This relation can be used to provide information on the magnitude and fluctuations of flow on a stream. If long-term or continuous information is needed on a specific site, a stream-gaging station can be established. A stream-gaging station is a site where stage is monitored and recorded and streamflow measurements are made to provide a stage-discharge relation. Ever since the first documented streamflow measurement was made in Ohio — on the Sandusky River — stream-gaging information has been used to minimize the effects of floods and droughts, determine locations for water intakes and wastewater-treatment plants, and provide data for many other uses. Today, stream gaging is a routine activity in managing the State’s water resources.

Ohio↗

Flood-tracking chart for the Withlacoochee and Little River Basins in south-central Georgia and northern Florida

The U.S. Geological Survey (USGS), in cooperation with other Federal, State, and local agencies, operates a flood-monitoring system in the Withlacoochee and Little River Basins. This system is a network of automated river stage stations (ten are shown on page 2 of this publication) that transmit stage data through satellite telemetry to the USGS in Atlanta, Georgia and the National Weather Service (NWS) in Peachtree City, Georgia. During floods, the public and emergency response agencies use this information to make decisions about road closures, evacuations, and other public safety issues. This Withlacoochee and Little River Basins flood-tracking chart can be used by local citizens and emergency response personnel to record the latest river stage and predicted flood-crest information along the Withlacoochee River, Little River, and Okapilco Creek in south-central Georgia and northern Florida. By comparing the current stage (water-surface level above a datum) and predicted flood crest to the recorded peak stages of previous floods, emergency response personnel and residents can make informed decisions concerning the threat to life and property.

Florida, Georgia↗

Implications of flume slope on discharge estimates from 0.762-meter H flumes used in edge-of-field monitoring

The effects of longitudinal slope on the estimation of discharge in a 0.762-meter (m) (depth at flume entrance) H flume were tested under controlled conditions with slopes from −8 to +8 percent and discharges from 1.2 to 323 liters per second. Compared to the stage-discharge rating for a longitudinal flume slope of zero, computed discharges were negatively biased (maximum −31 percent) when the flume was sloped downward from the front (entrance) to the back (exit), and positively biased (maximum 44 percent) when the flume was sloped upward. Biases increased with greater flume slopes and with lower discharges. A linear empirical relation was developed to compute a corrected reference stage for a 0.762-m H flume using measured stage and flume slope. The reference stage was then used to determine a corrected discharge from the stage-discharge rating. A dimensionally homogeneous correction equation also was developed, which could theoretically be used for all standard H-flume sizes. Use of the corrected discharge computation method for a sloped H flume was determined to have errors ranging from −2.2 to 4.6 percent compared to the H-flume measured discharge at a level position. These results emphasize the importance of the measurement of and the correction for flume slope during an edge-of-field study if the most accurate discharge estimates are desired.

Open-File Report↗

Colorado River campsite monitoring, Grand Canyon National Park, Arizona, 1998-2012

River rafting trips and hikers use sandbars along the Colorado River in Marble and Grand Canyons as campsites. The U.S. Geological Survey evaluated the effects of Glen Canyon Dam operations on campsite areas on sandbars along the Colorado River in Grand Canyon National Park. Campsite area was measured annually from 1998 to 2012 at 37 study sites between Lees Ferry and Diamond Creek, Arizona. The primary purpose of this report is to present the methods and results of the project. Campsite area surveys were conducted using total station survey methods to outline the perimeter of camping area at each study site. Campsite area is defined as any region of smooth substrate (most commonly sand) with no more than an 8 degree slope and little or no vegetation. We used this definition, but relaxed the slope criteria to include steeper areas near boat mooring locations where campers typically establish their kitchens. The results show that campsite area decreased over the course of the study period, but at a rate that varied by elevation zone and by survey period. Time-series plots show that from 1998 to 2012, high stage-elevation (greater than the 25,000 ft 3 /s stage-elevation) campsite area decreased significantly, although there was no significant trend in low stage-elevation (15,000–20,000 ft 3 /s) campsite area. High stage-elevation campsite area increased after the 2004 and 2008 high flows, but decreased in the intervals between high flows. Although no overall trend was detected for low stage-elevation campsite areas, they did increase after high-volume dam releases equal to or greater than about 20,000 ft 3 /s. We conclude that dam operations have not met the management objectives of the Glen Canyon Adaptive Management program to increase the size of camping beaches in critical and non-critical reaches of the Colorado River between Glen Canyon Dam and Lake Mead.

Arizona↗

Compilation of existing data for sand resource studies in Federal and California State Waters of the San Francisco, Oceanside, and Silver Strand littoral cell study areas along the continental shelf of California—Strategy for field studies and sand resource assessment

Executive Summary The Sand Resources Project was established through collaborative agreements between the U.S. Geological Survey (USGS), the Bureau of Ocean Energy Management (BOEM), and the California Ocean Protection Council (OPC) with the purpose of evaluating sand and gravel resources in Federal and California State Waters for potential use in future beach-nourishment projects. Project partners worked in collaboration with California Coastal Sediment Management Workgroup (CSMW) members to define priority study areas for this work based on the potential for finding sand within the broader region and the needs for this sand as shown by beach erosion areas of concern in the adjacent littoral cells. The final study areas were defined to be (1) the San Francisco Littoral Cell, (2) the Oceanside Littoral Cell, and (3) the Silver Strand Littoral Cell. A two-stage approach was used to assess the study areas. This report addresses the initial stage, which is a synthesis of the existing geophysical and sediment-sampling data in each area. This allowed for evaluations of the data availability, data gaps, and general patterns of sediment thickness and grain size. This report provides a description of the methods and results of this synthesis. The findings from this work were used to refine study area boundaries and develop sampling plans for stage two of the project. Stage two of the project, the results of which will be published separately, will be the collection, processing, and synthesis of new data, including high-resolution geophysical surveys and sediment cores within the three study areas. The data collected will provide new information about the three study areas including sediment thickness, grain-size distributions, and total organic carbon. The description and results of stage two of the work is included in another USGS report (Warrick and others, 2022).

California↗

Assessment of significant sand resources in Federal and California State Waters of the San Francisco, Oceanside, and Silver Strand littoral cell study areas along the continental shelf of California

Executive Summary The Sand Resources Project was established through collaborative agreements between the U.S. Geological Survey (USGS), the Bureau of Ocean Energy Management (BOEM), and the California Ocean Protection Council (OPC) with the purpose of evaluating sand and gravel resources in Federal and California State Waters for potential use in future beach-nourishment projects. Project partners worked in collaboration with California Coastal Sediment Management Workgroup (CSMW) members to define priority study areas for this work based on the potential for finding sand within the broader region and the needs for this sand as shown by beach erosion areas of concern in the adjacent littoral cells. The final study areas were defined to be (1) the San Francisco Littoral Cell, (2) the Oceanside Littoral Cell, and (3) the Silver Strand Littoral Cell. A two-stage approach was used to assess the study areas. The initial stage was a synthesis of the existing geophysical and sediment-sampling data in each area. This allowed for evaluations of the data availability, data gaps, and general patterns of sediment thickness and grain size. This synthesis was published in a separate USGS open-file report (Warrick and others, 2022). The findings from this assessment were used to refine study area boundaries and develop sampling plans for stage two of the project. Stage two of the project is the collection, processing, and synthesis of new data, including high-resolution geophysical surveys and sediment cores—this report addresses the second stage. The work focuses on two of the study areas—the San Francisco and the Oceanside Littoral Cells, where several research cruises have been conducted. A more limited, exploratory approach was used for the Silver Strand Littoral Cell, owing to the lack of existing high-resolution bathymetric data for this study area. The data collected provide new information about the three study areas, including sediment thickness, grain-size distributions, and total organic carbon. Sediment in all three study areas of the Sand Resources Study was suitable for beach nourishment, as reflected by their grain-size distributions and sediment thicknesses. For example, sandy sediment in the San Francisco Littoral Cell study area was on and immediately outside of the ebb-tidal bar of the San Francisco Bay, a landform that has a strong influence on grain-size patterns of the region. The presence of thick sediment deposits in this area was interpreted to be a function of tectonics, which has caused physical features that include a graben north of the Golden Gate whose deposits were thicker and siltier than the remaining area. Sandy sediment on the inner and outer parts of the continental shelf in the Oceanside Littoral Cell may be useful for nourishment, whereas the midshelf between these areas was dominated by silty sediment. Sediment in the Silver Strand Littoral Cell, which was only sampled selectively, had the greatest potential for beach nourishment because of the greater prevalence of beach-comparable grain sizes, especially in the more distal and deeper areas where medium sands were found. The Sand Resources Project did identify several sandy regions of the continental shelf that are deeper than dredging technologies currently (2022) available in the United States, which are generally limited to 30 meters (m) water depth or less. Although sandy sediment exists in all three study areas at water depths of 30 m or less, additional sediment supplies—most of which are in Federal Waters—are present in deeper settings, especially for the Oceanside and Silver Strand Littoral Cell study areas. Although the Silver Strand Littoral Cell study area was found to be considerably replete in sand resources, these conclusions are based on a limited sampling exercise across that study area. Thus, it may be beneficial to complete a more thorough characterization of the sediment resources in the Silver Strand Littoral Cell study area if it is determined that a need for sandy coastal sediment exists in this region. As a result of the Sand Resources Project, several areas of sand resources in Federal and California State Waters were found where they were previously unknown. As such, this project may provide important data for future coastal-management decisions in California, and it should provide a model for future investigations of sediment resources in other regions of the State.

California↗

Geology and porphyry copper-type alteration-mineralization of igneous rocks at the Christmas Mine, Gila County, Arizona

The Christmas copper deposit, located in southern Gila County, Arizona, is part of the major porphyry copper province of southwestern North America. Although Christmas is known for skarn deposits in Paleozoic carbonate rocks, ore-grade porphyry-type copper mineralization also occurs in a composite granodioritic intrusive complex and adjacent mafic volcanic country rocks. This study considers the nature, distribution, and genesis of alteration-mineralization in the igneous rock environment at Christmas. At the southeast end of the Dripping Spring Mountains, the Pennsylvanian Naco Limestone is unconformably overlain by the Cretaceous Williamson Canyon Volcanics, a westward-thinning sequence of basaltic volcanic breccia and lava flows, and subordinate clastic sedimentary rocks. Paleozoic and Mesozoic strata are intruded by Laramide-age dikes, sills, and small stocks of hornblende andesite porphyry and hornblende rhyodacite porphyry, and the mineralized Christmas intrusive complex. Rocks of the elongate Christmas stock, intruded along an east-northeast-trending fracture zone, are grouped into early, veined quartz diorite (Dark Phase), biotite granodiorite porphyry (Light Phase), and granodiorite; and late, unveined dacite porphyry and granodiorite porphyry. Biotite rhyodacite porphyry dikes extending east and west from the vicinity of the stock are probably coeval with biotite granodiorite porphyry. Accumulated normal displacement of approximately 1 km along the northwest-trending Christmas-Joker fault system has juxtaposed contrasting levels (lower, intrusive-carbonate rock environment and upper, intrusive-volcanic rock environment) within the porphyry copper system. K-Ar age determinations and whole-rock chemical analyses of the major intrusive rock types indicate that Laramide calc-alkaline magmatism and ore deposition at Christmas evolved over an extended period from within the Late Cretaceous (~75-80 m.y. ago) to early Paleocene (~63-61 m.y. ago). The sequence of igneous rocks is progressively more alkaline and silicic from basalt to granodiorite. Early (Stage I) chalcopyrite-bornite (-molybdenite) mineralization and genetically related K-silicate alteration are centered on the Christmas stock. K-silicate alteration is manifested by pervasive hornblende-destructive biotitization in the stock, biotitization of basaltic volcanic wall rocks, and a continuous stockwork of K-feldspar veinlets and quartz-K-feldspar veins in the stock and quartz-sulfide veins in volcanic rocks. Younger (Stage II) pyrite-chalcopyrite mineralization and quartz-sericite-chlorite alteration occur in a zone overlapping with but largely peripheral to the zone of Stage I stockwork veins. Within the Christmas intrusive complex, K-silicate-altered rocks in the central stock are flanked east and west by zones of fracture-controlled quartz-sericite alteration and strong pyritization. In volcanic rocks quartz-chlorite-pyrite-chalcopyrite veins are superimposed on earlier biotitization and crosscut Stage I quartz-sulfide veins. Beyond the zones of quartz-sericite alteration, biotite rhyodacite porphyry dikes contain the propylitic alteration assemblage epidote-chlorite-albite-sphene. Chemical analyses indicate the following changes during pervasive alteration of igneous rocks: (1) addition of Si, K, H, S, and Cu, and loss of Fe 3+ and Ca during intense biotitization of basalt; (2) loss of Na and Ca, increase of Fe3+/Fe2+, and strong H-metasomatism during sericitization of quartz diorite; and (3) increase in Ca, Na, and Fe3+/Fe2+, and loss of K during intense propylitization of biotite rhyodacite porphyry dikes. Thorough biotitization of biotite granodiorite porphyry in the Christmas stock was largely an isochemical process. Fluid-inclusion petrography reveals that Stage I veins are characterized by low to moderate populations of moderate-salinity and gas-rich inclusions, and sparse but ubiquitous halite-bearing inclusions. Moderate-salinity an

Open-File Report↗

Geology and hydrothermal alteration at the Madh adh Dhahab epithermal precious-metal deposit, Kingdom of Saudi Arabia

Mahd adh Dhahab is a late Precambrian epithermal gold-silver-base metal deposit located in the west-central part of the Arabian Shield. North-trending quartz veins containing base and precious metals cut an east-striking, north-dipping homoclinal sequence of volcanic, volcaniclastic, and epiclastic rocks of intermediate to felsic composition. Ore was localized where the veins cut competent, coarse-grained, fragmental units directly below incompetent and impermeable tuff units. The proximity of an epizonal rhyolite porphyry stock to these contacts also was important in localizing ore. Ore minerals include native gold and silver, gold-silver tellurides, chalcopyrite, sphalerite, and minor galena, and five stages of mineralization have been identified. Vein-related alteration consisting of quartz-sericite-pyrite, chloritic, argillic, and silicic halos was superimposed on broad zones of pervasive silicic, potassic, and argillic alteration that surrounds the rhyolite intrusive body. Quartz-sericite-pyrite alteration associated with the earliest stage of mineralization was followed by broad, pervasive, stratigraphically controlled potassic alteration. Subsequent mineralization was accompanied by quartz-sericitepyrite alteration and was followed by the main stage of mineralization that formed strong chloritic alteration halos. Development of broad zones and halos of argillic alteration also may have been related to the main stage of mineralization. Development of silicic halos was characteristic of the late stages of mineralization. Broad, pervasive propylitic alteration was then superimposed on all alteration types and represents cooling and inward encroachment of the hydrothermal system. All alteration, except the early silicic alteration is interpreted to have been related to circulating meteoric fluids heated by the rhyolite.

Open-File Report↗

Water-level fluctuations, water temperatures, and tilts in sandbars -6.5R, 43.1L, and 172.3L, Grand Canyon, Arizona, 1990-93

Rill erosion, slumping, and fissuring develop on seepage faces of many sandbars along the Colorado River in the Grand Canyon at low river stage. Three sandbars were instrumented with sensors for continual monitoring of stage, pore pressure, ground-water temperature, and tilt to determine the relation between ground-water flow and sandbar deformation. Data were collected from October 1990 to July 1993 at sandbar -6.5R, which had 17 pore- pressure sensors, 1 stage sensor, 19 temperature sensors, and 8 tilt sensors. Data were collected from April 1991 to March 1993 at sandbar 172.3L, which had 15 pore-pressure sensors, 1 stage sensor, 29 temperature sensors, and 10 tilt sensors. Atten- uation of water-level fluctuation from the zone of fluctuating river stage to the back of the sandbars ranged from 70 percent at sandbar -6.5R to 40 percent for sandbars 43.1L and 172.3L. Shallow tilt occurred at sandbar 43.1L from July 7 to August 10, 1991. Tilt occurred at sandbar 172.3L on May 7-8, June 18-19, and September 1-2, 1991; July 3 and 31, 1992; January 12, 14, 20-21, and 31, 1993; and February 21 and 24, 1993.

Open-File Report↗

Water-quality and hydrologic conditions at a site of ground-water contamination by volatile organic compounds, South Grafton, Massachusetts, September and October 1994

Ground-water quality and hydrologic data were collected at a site contaminated by volatile organic compounds (VOCs) in South Grafton, Massachusetts, during September and October 1994. The VOCs have formed a plume of contaminated ground water at an abandoned textile mill adjacent to the Blackstone River. Concentrations of total VOCs in the plume ranged from less than 1 to more than 40,000 micrograms per liter. Trichloroethylene (TCE) was the primary chlorinated contaminant, comprising as much as 98 percent of the total VOCs. The highest concentration, 43,000 micrograms per liter, was higher than any previously measured concentration at the site; however, the maximum extent and distribution of concentrations in the VOC plume in September 1994 was similar to that found in July 1993 and in earlier rounds of sampling. In addition to TCE, 1,2-dichloroethene (1,2-DCE) and vinyl chloride were detected at most sites. Spatial and temporal changes in concentrations of TCE, 1,2-DCE, and vinyl chloride are consistent with the hypothesis that TCE biodegradation was the source of 1,2-DCE and vinyl chloride. Ground water at the site contained low to moderately high concentrations of dissolved solids (44 to 406 milligrams per liter), had a moderately high specific conductance (155 to 670 microsiemens per centimeter at 25 degrees Celsius), and was slightly acidic (pH=5.9 to 7.0). Concentrations of the major ions-calcium, sodium, chloride, and sulfate-were not related to VOC concentrations. Dissolved-oxygen concentrations were low (0 to 2 milligrams per liter) throughout most of the aquifer. Distribution of nitrogen species, iron, and manganese indicates that zones of varying oxidation-reduction potential were present in the aquifer. Concentrations of trace metals other than iron or manganese, including arsenic, cadmium, chromium, and copper, generally were less than analytical detection limits. Stream stage in the Blackstone River at the site during September and October 1994 fluctuated by about 1 to 2 feet within 24-hour periods. These rapid fluctuations resulted from sudden release of impounded water at a hydroelectric-generating facility downstream from the site. In addition to the daily fluctuations, rapid small changes in stream stage also occurred that were related to storms. Fluctuations in ground-water levels in four observation wells at the site were similar in amplitude and timing to the rapid fluctuations in stream stage; the daily fluctuations of ground-water levels were greatest in an observation well within 100 feet of the river and least in an observation well about 300 feet from the river. Because ground- water levels at the study site seem to be affected by fluctuations in stage of the Blackstone River, transport of the VOC plume in ground water also is likely to be affected by the fluctuations in stage.

Open-File Report↗

Trepostome and cystoporate bryozoans from the Lexington Limestone and the Clays Ferry Formation (Middle and Upper Ordovician) of Kentucky

The Lexington Limestone and the Clays Ferry Formation of Kentucky contain an abundant and diversified fossil invertebrate fauna. This report is concerned with the trepostome and cystoporate bryozoans that constitute a major part of that fauna. The Lexington Limestone, largely a biofragmental fossiliferous limestone, rests disconformably on the Tyrone Limestone (Middle Ordovician). The Clays Ferry Formation consists of approximately equal amounts of biofragmentallimestone and shale, and it overlies conformably, or intertongues with, the upper part of the Lexington Limestone. The Clays Ferry Formation is overlain by the Garrard Siltstone (Upper Ordovician) in central Kentucky and intertongues with the Kope Formation (Upper Ordovician) in northern Kentucky. The MiddleUpper Ordovician boundary falls within the upper part of the Lexington Limestone and laterally equivalent strata of the Clays Ferry Formation. The Lexington Limestone has been divided into 12 members, consisting of calcarenites, calcisiltites, calcilutites, nodular limestones, and shales in various amounts, that intertongue complexly. Because of the great abundance of bryozoans this study is generally limited to bryozoans recovered from, in ascending order, the Grier Limestone Member, the Perryville Limestone Member, the Brannon Member, the Tanglewood Limestone Member, and the Millersburg Member of the Lexington Limestone and from the Clays Ferry Formation and its Point Pleasant Tongue. The trepostome and cystoporate bryozoans discussed are referred to 36 species belonging to 22 genera. The trepostome component includes 29 species belonging to 16 genera: Amplexopora, Atactoporella, Balticopora, Batostoma, Cyphotrypa, Dekayia, Eridotrypa, Hetero-_ trypa, Homotrypa, Homotrypella, Mesotrypa, Parvohallopora, Peronopora, Prasopora, Stigmatella, and Tarphophragma, a new genus. Five of the trepostome species are new: Balticopora arcuatilis, Cyphotrypa switzeriensis, Dekayia epetrima, Eridotrypa sadievillensis, and Homotrypa cressmani. The cystoporate bryozoans include 7 species belonging to 6 genera: Acanthoceramoporella, Ceramophylla, Ceramoporella, Constellaria, Crepipora, and Papillalunaria. One cystoporate species is new: Acanthoceramoporella valliensis. The trepostome and cystoporate fauna on the generic level is, with few exceptions, cosmopolitan. Five genera, Eridotrypa, Parvohallopora, Heterotrypa, Constellaria, and Peronopora, dominate the fauna, comprising about 77 percent of the thin-sectioned specimens. On the species level the fauna is endemic to the Ordovician of eastern North America and is biostratigraphically restricted to strata of late Blackriveran Stage (Middle Ordovician) to early Maysvillian Stage (middle Late Ordovician). In Kentucky the species of this fauna are restricted to strata between the base of the Lexington Limestone (Kirkfieldian Stage, Middle Ordovician) and the top of the Clays Ferry Formation and its lateral equivalent the Kope Formation (Edenian Stage, lower Upper Ordovician), with few species ranging into strata of early Maysvillian Stage (middle Late Ordovician) in adjacent areas of Indiana and Ohio. On the basis of the known geographic distribution of the various species, the fauna in Kentucky consists of an intermingling of immigrant and endemic species. The immigrant component (11 species) is generally limited to the lower half of the Lexington-Clays Ferry depositional sequence and permits the establishment of a degree of biostratigraphic equivalence with outcrop areas in Minnesota-Iowa and New York. On the species level the fauna in Kentucky is dominated by four: Constellaria teres, Heterotrypa foliacea, Parvohallopora nodulosa, and Eridotrypa mutabilis, in decreasing relative abundance. The first three species are restricted to the upper part of the Lexington Limestone and the Clays Ferry Formation. Eridotrypa mutabilis is restricted to the middle part of the Lexington Limestone and the lower half of the Clays Fer

Professional Paper↗

Geology and paleontology of the Santa Maria district, California

Stratigraphy, paleontology, and geologic history.-A basement' consisting of igneous rocks of the Jurassic(?) Franciscan formation and sediments of the Upper Jurassic Knoxville formation, and formations of Tertiary and Quaternary age are exposed in the Santa Maria district. The outcrop section, exclusive of the Franciscan, has a maximum thickness of about 10,000 feet, the subsurface section about 27,000 feet. At no locality, however, is either outcrop or subsurface section as thick as the total maxima for the formations. The outcrop Franciscan is made up of altered basalt, gabbro (generally- greatly altered), and minor areas of peridotite and serpentine. The marine Knoxville formation, consisting of shale, thin-bedded calcareous sandstone, and conglomerate, was deposited on the igneous rocks of the Franciscan. It has an outcrop thickness of about 500 feet and a known subsurface thickness of at least 1,250 feet. Aucella cf. A. piochii, which occurs in both outcrop and subsurface sections, suggests late Jurassic age. The Franciscan and Knoxville were probably uplifted during Taliaferro's Diablan orogeny at the close of the Jurassic and formed a land area that presumably endured during early Cretaceous and perhaps during much of late Cretaceous time. If sediments were laid down while 10,000 feet of Upper Cretaceous were deposited in the adjoining San Rafael Mountains, they were eroded following uplift at the close of the Cretaceous, when Reed and Hollister's San Rafael uplift was formed. The district is inferred to have been part of a Franciscan and Knoxville land area at the south border of the San Rafael uplift during all of early Tertiary time. The known history of the district as part of a Tertiary basin began in the early Miocene(?), possibly a little earlier or possibly 3: little later, when the nonmarine sediments of the early Miocene(?) Lospe formation were deposited. The Lospe formation has a maximum thickness of 2, 700 feet, and is made up of coarse-grained reddish sandstone and conglomerate, and greenish sandstone, gypsiferous siltstone, and mudstone. White tuff is a minor but conspicuous constituent. The Lospe formation overlies the Knoxville, or&middot; overlaps it and rests on the Franciscan. The first known Tertiary invasion of the sea took place immediately thereafter in early middle Miocene time, and from then on until approximately the end of the Pliocene the sea occupied continuously at least most of the region. The extent of the Miocene basin is not certainly known, but it was part of an extensive&middot; basin that has been designated the Santa Barbara embayment. The early middle Miocene Point Sal formation is the earliest marine Tertiary formation. It has an outcrop thickness of as much as 1,500 feet and a maximum subsurface thickness of 3,600 feet, and consists of siltstone, mudstone, and thin beds of sandstone. The Point Sal formation overlies the Lospe formation without marked discontinuity, or overlaps it and rests on Knoxville or Franciscan. It contains a large foraminiferal fauna representing the Siphogenerina hughesi zone, or the lower part of Kleinpell's Relizian stage. The Monterey shale overlies the Point Sal formation without noticeable discontinuity, or overlaps all the older sedimentary formations and rests on the Franciscan. It has a maximum outcrop thickness of 2,100 feet, but is as much as 5,000 feet thick in some subsurface sections. The Monterey is divided into three mapped members. The lower member is characterized by phosphatic shale and somewhat porcelaneous shale; the middle member by chert and cherty shale; and the upper member by porcelaneous shale, or by both porcelaneous shale and diatomaceous strata. The lower member contains Foraminifera representing the upper part of Kleinpell's Relizian stage and all of his Luisian stage, the middle member a few species indicating the lower part of his Mohnian stage, and the upper member a fauna representing the upper part of the Bolivina hughesi zone, at the top of the Mohnian, and in part a younger unnamed faunal division; that is, the Monterey is of late middle and late Miocene age. The diverse stratigraphic relations of the Lospe and Point Sal formations and Monterey shale along the borders of the Franciscan rocks forming Point Sal Ridge are inferred to be the result of repeated movements during Miocene time in the area of basement rocks west of the district, presumably extending westward beyond the present coast. Toward the close of the Miocene, low ridges appeared on the floor of the sea, ridges that grew during Pliocene time and were destined to become anticlines. At the same time deformation took place in the northeastern part of the district, and elsewhere on some anticlines, or on other structural highs bounded by faults. In those areas the Sisquoc formation overlies the Monterey shale with marked discordance; elsewhere there is no discordance. Two facies of the Sisquoc formation are mapped: a marginal sandstone facies, designated the Tinaquaic sandstone member, and a basin facies. The Tinaquaic sandstone member is 1,400 feet thick and contains megafossils of middle Pliocene age (also early Pliocene just east of the mapped area). It is unconformable on the Monterey. The basin facies, at least 3,000 feet thick in outcrop sections and 5,000 in some subsurface sections, consists of diatomaceous mudstone, other types of diatomaceous &middot;strata, somewhat porcelaneous mudstone, and porcelaneous shale-deposits that are ordinarily characteristic of the Monterey shale. Even in areas where the two formations are lithologically indistinguishable and conformable, a field basis for differentiating them has been established. The basin facies of the Sisquoc conformably overlies the Monter.ey in outcrop sections, but in some subsurface sections the formations are unconformable, and on the north limb of the Santa Maria Valley syncline the basin facies of the Sisquoc overlaps the Monterey onto the basement, thus forming the overlap trap for the oil in the Monterey in the Santa Maria Valley field. The lower and middle parts of the basin facies contain Foraminifera of the Bolivina obliqua zone. Kleinpell assigned that zone to the lower part of his late upper Miocene Delmontian stage. Assignment to the upper Delmontian, however, appears to be preferable. The upper few hundred feet of the basin facies contain Foraminifera similar to those in the overlying Foxen mudstone and megafossils of middle Pliocene affinities. The basin facies is therefore considered late upper Miocene to middle Pliocene. The submarine ridges were growing during Pilocene time. The Foxen mudstone is missing on them and in the northeastern part of the district. On the north limb of the Santa Maria Valley syncline, the Foxen overlaps the Sisquoc formation and rests on the basement. In the basins between the submarine ridges, the mudstone, siltstone, and fine-grained sandstone of the Foxen (800 feet thick in outcrop sections and as much as 2, 750 in subsurface sections) overlie conformably the Sisquoc formation. In some of the areas where the Foxen is missing as a lithologic unit, it appears to be represented by condensed deposits of phosphatic pellets, mapped with the underlying or overlying Formation, depending on the matrix, or by a condensed section of fine-grained sand, mapped with lithologically indistinguishable sand in the basal part of the overlying formation. Though foraminifera are abundant in the Foxen mudstone, relatively few species are represented. Those from the lower part of the formation may be of middle Pliocene age. Megafossils from the upper part of the Foxen are considered late Pliocene. The formation is therefore assigned to the middle(?) and upper Pliocene. Movements during Pliocene time in the basement area west of Point Sal Ridge are indicated by the occurrence in the western Casmalia Hills of coarse detritus from the Monterey in the upper part of the Sisquoc formation and in the Foxen mudstone. During late Pliocene time, when the Careaga sandstone was deposited, the Pliocene sea had its greatest extent. The region then flooded may be referred to as the Santa Maria basin. Throughout most of the district two mapped members of the Careaga sandstone are differentiated: the Cebada fine-grained member, which has a maximum outcrop thickness of 1,000 feet, and the Graciosa coarse-grained member, 50 to 425 feet thick. Mild deformation continued during the late Pliocene. The Cebada fine-grained member is missing on the embryonic anticlines, where it is overlapped by the Graciosa coarse-grained member. Both members of the Careaga sandstone contain a large megafauna. The nonmarine Paso Robles formation conformably overlies the Careaga sandstone. The Paso Robles consists chiefly of sand and gravel, but clay, marl, and limestone are the most characteristic constituents. The maximum outcrop thickness is 2,000 feet, the estimated maximum subsurface thickness 4,500 feet. The Paso Robles fresh-water fauna is meager, consisting of a few species similar to living forms. The formation is currently assigned to the interval including late Pliocene and early Pleistocene(?). The age assignment late Pliocene(?) and early Pleistocene, however, may be preferable for the Santa Maria district. Then followed the only period of strong general deformation in the known Tertiary and Pleistocene history of the district. The present structural features of the district were formed at that time, and the submarine ridges appeared as fully formed anticlines. Dating of the deformation is uncertain, because of uncertainty concerning the age of the Paso Robles formation. It is, however, without much doubt of the same age as the welldated strong middle Pleistocene deformation in the Ventura basin. Terrace deposits, laid down on both wave-cut and stream-cut platforms, are rather arbitrarily assigned to the late Pleistocene. The oldest and most extensive terrace deposits, not more than 100 feet thick, are designated the Orcutt sand. The Orcutt sand itself is tilted as much as 12&deg; on the limbs of anticlines and is faulted on the north limb of the Graciosa anticline, indicating renewed growth of the anticlines, presumably in late Pleistocene time. Terrace deposits apparently younger than the Orcutt sand are arched in a low anticline west of lower Foxen Canyon. Structure.-Santa Maria Valley is the boundary between two structural provinces. To the north, valleys and hills are either synclines or anticlines. To the south, on the contrary, major valleys coincide generally with major synclines, and the hills are anticlinal. Santa Maria Valley itself is a syncline. Unlike valleys farther south in the district, however, it lies athwart an older uplift. Also unlike most of the valleys farther south, the axis of the syncline is not in the middle of the valley, but is far to the south near the bordering hills. Indeed, in the western Casmalia Hills, the anticline in the bordering hills is overturned and overrides the axis of the syncline. The major structural features of the district have a general west-northwestward trend parallel to the trend of the basin. Minor westward-trending and northward-trending folds and faults, however, extend across the trend of the major features. The district includes areas of wide, open folds and also areas of narrow, closely spaced, and steeply tilted folds, as well as some major overturned anticlines, most of the latter overturned northward. The closely spaced folds coincide almost invariably with outcrops of the Monterey shale and Point Sal formation. Physiography.-The surface on which the terrace deposits, designated the Orcutt sand, were deposited is extensive but is locally deformed, and only remnants are preserved. Toward the coast it changes from a stream-cut surface to a wave-cut surface. In the coastal area three main marine terraces are recognized: the high terrace (altitude about 800 feet), the intermediate terrace (altitude about 600 feet), and the low terrace (altitude 50 to 125 feet). An indurated layer is present at or near the surface at many localities scattered throughout the district. It is suggested that the indurated layer is an ancient hardpan, the incomplete skeleton of a former soil profile developed on a former surface of less relief than the present surface. Sand dunes extend inland from the coast at the north and south borders of the mapped area. They are classified under three age groups: old, intermediate, and modern. The old dunes, which have a protective cover of natural vegetation and are now inactive, are far more extensive than those of the other two groups. They cover many square miles on a terrace bordering Santa Maria Valley, and extend 20 miles inland. It has not been determined whether their inactivity is due to a cutting off of the supply of sand, or to a climatic change. Occurrence of oil.--Oil has been produced in the Santa Maria district since 1901, the total production to the end of 1947 being 269,657,000 barrels. Throughout the district most of the oil is heavy. Seven producing fields are located in the mapped area. In order of discovery from oldest to youngest the fields are as follows: Orcutt, Lompoc, West Cat Canyon, East Cat Canyon, Casmalia, Gato Ridge, and Santa Maria Valley. The Santa Maria Valley field is the largest in both area and productive capacity. It is the largest overlap field in coastal California, and one of the last major fields found in the State up to 1947. The Las Flores (Monterey) pool is transforming the West Cat Canyon field into one of the major fields of the district. The Monterey shale is the chief oil-bearing formation, and the principal reservoir in the Monterey consists of fractured chert and cherty shale. Sand in the Sisquoc formation is the sole reservoir in the minor East Cat Canyon field and in the Pliocene pool of the West Cat Canyon field. The Point Sal formation yields some oil in the southeastern part of the Santa Maria Valley field (the only part of that field where the formation is present) and a recent well in the Casmalia field is producing a small amount of relatively light oil from the Point Sal. The Lospe formation is also productive in a recent well in the Casmalia field. The Knoxville formation is productive in three areas in the northern part of the Santa Maria Valley field. The Point Sal formation offers the greatest promise for deeper-zone production. The Lospe and Knoxville formations can no longer be ignored in areas where younger marine formations overlap against them. Oil possibilities in undeveloped areas.--Two matters weigh heavily in prospecting in the Santa Maria district: the degree of fracturing of chert and cherty shale in the Monterey shale, and the gravity of the oil. Other things being equal, the productivity of the Monterey varies directly with the amount of fracturing. Very heavy oil, too heavy to produce commercially under present conditions, has befln found ii the Monterey in the northeastern part of the district, where five discoveries (one east of the mapped area) have been made in recent years. Among areas of possible interest, three appear to be favorable for prospecting on the basis of surface geology: an area east of Foxen Canyon, where oil may be trapped in the basal part of the Tinaquaic sandstone member of the Sisquoc formation by westward overlap of successively higher Tinaquaic strata onto the Monterey shale; an area so1tth of the I ... ions Head fault, where oil may be trapped by the fault; and the offshore extension of the north border of Point Sal Ridge, where oil may possibly be trapped in the Monterey by overlap of the Sisquoc formation.

California↗

Flood-inundation maps for the Wabash River at Terre Haute, Indiana

Digital flood-inundation maps for a 6.3-mi reach of the Wabash River from 0.1 mi downstream of the Interstate 70 bridge to 1.1 miles upstream of the Route 63 bridge, Terre Haute, Indiana, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent of flooding corresponding to select water levels (stages) at the USGS streamgage Wabash River at Terre Haute (station number 03341500). Current conditions at the USGS streamgage may be obtained on the Internet from the USGS National Water Information System (http://waterdata.usgs.gov/in/nwis/uv/?site_no=03341500&agency_cd=USGS&p"). In addition, the same data are provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system (http://water.weather.gov/ahps//). Within this system, the NWS forecasts flood hydrographs for the Wabash River at Terre Haute that may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated using the most current stage-discharge relation at the Wabash River at the Terre Haute streamgage. The hydraulic model was then used to compute 22 water-surface profiles for flood stages at 1-ft interval referenced to the streamgage datum and ranging from bank-full to approximately the highest recorded water level at the streamgage. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from Light Detection and Ranging (LiDAR) data having a 0.37-ft vertical accuracy and a 1.02-ft horizontal accuracy) to delineate the area flooded at each water level. The availability of these maps along with Internet information regarding the current stage from the USGS streamgage and forecasted stream stages from the NWS can provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures as well as for post flood recovery efforts.

Indiana↗

Flood-inundation maps for the East Fork White River at Columbus, Indiana

Digital flood-inundation maps for a 5.4-mile reach of the East Fork White River at Columbus, Indiana, from where the Flatrock and Driftwood Rivers combine to make up East Fork White River to just upstream of the confluence of Clifty Creek with the East Fork White River, were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Department of Transportation. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation, depict estimates of the areal extent of flooding corresponding to selected water levels (stages) at USGS streamgage 03364000, East Fork White River at Columbus, Indiana. Current conditions at the USGS streamgage may be obtained on the Internet from the USGS National Water Information System (http://waterdata.usgs.gov/in/nwis/uv/?site_no=03364000&agency_cd=USGS&). The National Weather Service (NWS) forecasts flood hydrographs for the East Fork White River at Columbus, Indiana at their Advanced Hydrologic Prediction Service (AHPS) flood warning system Website (http://water.weather.gov/ahps/), that may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relation at USGS streamgage 03364000, East Fork White River at Columbus, Indiana. The calibrated hydraulic model was then used to determine 15 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from bankfull to approximately the highest recorded water level at the streamgage. The simulated water-surface profiles were then combined with a geographic information system digital elevation model (derived from Light Detection and Ranging (LiDAR) data), having a 0.37-ft vertical accuracy and a 1.02 ft horizontal accuracy), in order to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage at Columbus, Indiana, and forecasted stream stages from the NWS will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures as well as for post-flood recovery efforts.

Indiana↗

Flood-inundation maps for the DuPage River from Plainfield to Shorewood, Illinois, 2013

Digital flood-inundation maps for a 15.5-mi reach of the DuPage River from Plainfield to Shorewood, Illinois, were created by the U.S. Geological Survey (USGS) in cooperation with the Will County Stormwater Management Planning Committee. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ depict estimates of the areal extent of flooding corresponding to selected water levels (gage heights or stages) at the USGS streamgage at DuPage River at Shorewood, Illinois (sta. no. 05540500). Current conditions at the USGS streamgage may be obtained on the Internet at http://waterdata.usgs.gov/usa/nwis/uv?05540500. In addition, the information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system (http://water.weather.gov/ahps/). The NWS forecasts flood hydrographs at many places that are often colocated with USGS streamgages. The NWS-forecasted peak-stage information, also shown on the DuPage River at Shorewood inundation Web site, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was then used to determine nine water-surface profiles for flood stages at 1-ft intervals referenced to the streamgage datum and ranging from NWS Action stage of 6 ft to the historic crest of 14.0 ft. The simulated water-surface profiles were then combined with a Digital Elevation Model (DEM) (derived from Light Detection And Ranging (LiDAR) data) by using a Geographic Information System (GIS) in order to delineate the area flooded at each water level. These maps, along with information on the Internet regarding current gage height from USGS streamgages and forecasted stream stages from the NWS, provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Illinois↗