Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Soil Systems”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources
USGS2005

Sensitivity of alpine and subalpine lakes to acidification from atmospheric deposition in Grand Teton National Park and Yellowstone National Park, Wyoming

The sensitivity of 400 lakes in Grand Teton and Yellowstone National Parks to acidification from atmospheric deposition of nitrogen and sulfur was estimated based on statistical relations between acid-neutralizing capacity concentrations and basin characteristics to aid in the design of a long-term monitoring plan for Outstanding Natural Resource Waters. Acid-neutralizing capacity concentrations that were measured at 52 lakes in Grand Teton and 23 lakes in Yellowstone during synoptic surveys were used to calibrate the statistical models. Three acid-neutralizing capacity concentration bins (bins) were selected that are within the U.S. Environmental Protection Agency criteria of sensitive to acidification; less than 50 microequivalents per liter (?eq/L) (0-50), less than 100 ?eq/L (0-100), and less than 200 ?eq/L (0-200). The development of discrete bins enables resource managers to have the ability to change criteria based on the focus of their study. Basin-characteristic information was derived from Geographic Information System data sets. The explanatory variables that were considered included bedrock type, basin slope, basin aspect, basin elevation, lake area, basin area, inorganic nitrogen deposition, sulfate deposition, hydrogen ion deposition, basin precipitation, soil type, and vegetation type. A logistic regression model was developed and applied to lake basins greater than 1 hectare in Grand Teton (n = 106) and Yellowstone (n = 294). A higher percentage of lakes in Grand Teton than in Yellowstone were predicted to be sensitive to atmospheric deposition in all three bins. For Grand Teton, 7 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-50 bin, 36 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-100 bin, and 59 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-200 bin. The elevation of the lake outlet and the area of the basin with northeast aspects were determined to be statistically significant and were used as the explanatory variables in the multivariate logistic regression model for the 0-100 bin. For Yellowstone, results indicated that 13 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-100 bin, and 27 percent of lakes had a greater than 60-percent probability of having acid-neutralizing capacity concentrations in the 0-200 bin. Only the elevation of the lake outlet was determined to be statistically significant and was used as the explanatory variable for the 0-100 bin. The lakes that exceeded 60-percent probability of having an acid-neutralizing capacity concentration in the 0-100 bin, and therefore had the greatest sensitivity to acidification from atmospheric deposition, are located at elevations greater than 2,790 meters in Grand Teton, and greater than 2,590 meters in Yellowstone.

Scientific Investigations Report↗
USGS1994

Reconnaissance investigation of water quality, bottom sediment, and biota associated with irrigation drainage in the Owyhee and Vale Projects, Oregon and Idaho, 1990-91

A reconnaissance investigation was conducted during 1990--91 in the Owyhee and Vale projects in eastern Oregon and southwestern Idaho, as well as at a number of sites in the Snake River and tributaries to the Snake River in the area of study. The objective of the study was to determine if agricultural drainwater entering the study area was causing, or had the potential to cause, significant harmful effects to human health, fish and wildlife, or may adversely affect the suitability of water for beneficial uses. Approximately 153,000 acres of land are irrigated annually within the areas of the Owyhee and Vale projects. Large quantities of water are required because of the semiarid climate and relatively high evaporation rates. Several reservoirs in the area are filled annually during the wet, nonirrigation season to sustain irrigation during the dry summer months. During the irrigation season, this impounded water, along with direct diversions from the Malheur, Owyhee, and Snake Rivers, is transported to the irrigated areas through a series of diversion tunnels, siphons, canals, aqueducts, ditches, and drains. Major crops grown in the area include sugar beets, alfalfa hay and other hay crops, onions, and winter wheat. Minor crops include corn, potatoes, mint, various seed crops, and fruit. In 1987, it was estimated that the following amounts of pesticides were used in the project areas: 2,4-D (21,000 lbs [pounds]), chlorpyrifos (1,000 lbs), dacthal (40,000 lbs), dicamba (320 lbs), endosulfan (2,500 lbs), ethion (11,000 lbs), malathion (24,000 lbs), parathion (5,000 lbs), and phorate (11,000 lbs). Median concentrations and values for total dissolved solids, alkalinity, sodium adsorption ratio, and hardness in the Vale project area were greater than 1.5 times those values observed in the Owyhee project area or at other Snake River locations. During irrigation (August 1990), total dissolved solids, alkalinity, sodium adsorption ratio, and hardness values increased in a downstream manner. Constituent values at drainwater sites generally were comparable to concentrations below the irrigated ureas in the Owyhee and Vale project areas. The trace elements arsenic, boron, copper, molybdenum, vanadium, and zinc were detected in most water samples; cadmium, chromium, lead, and selenium were detected in some samples at concentrations generally near the analytical reporting limit; mercury was not detected in any samples. In some water samples, concentrations of arsenic, boron, cadmium, copper, and lead exceeded State or Federal water-quality standards or criteria. Most trace elements in bottom sediment were detected at concentrations within the expected 95-percent baseline range for soils from the Western United States. Concentrations that exceeded the 95-percent baseline range for study area soils were: (1) arsenic and lead in one sample from a site in the Vale project area; (2) mercury, lead, and tin in one sample from a site in the Snake River system; (3) manganese in two samples from two sites in the Snake River system; and (4) manganese from one sample from a site in the Vale project area. Fifteen pesticides and metabolites were detected in whole-water samples collected from sites in the study area. DDT, plus its metabolites (DDE and DDD), dieldrin, endrin, 2,4-D, dicamba, and dacthal were detected in samples collected from seven or more sites. Other pesticides detected included chlorpyrifos, endosulfan, ethion, malathion, parathion, phorate, and lindane. Most of the detected pesticide concentrations generally were largest in drainwater and at the most downstream sampling locations in the Owyhee and Vale project areas. Concentrations exceeded water-quality criteria established for the protection of freshwater aquatic life in 86 percent of the whole-water samples analyzed for DDT plus its metabolites, 71 percent of the dieldrin samples, 14 percent of the endrin samples, and 10 percent of the parathion samples. Eight pesticides and

Water-Resources Investigations Report↗
USGS2001

Methanogenic biodegradation of charcoal production wastes in groundwater at Kingsford, Michigan, USA

A house exploded in the City of Kingsford, Michigan USA. The explosion was caused by CH4 that leaked into the basement from the surrounding soil. Evidence suggests that biodegradation of products from the distillation and spillage at or near a former wood carbonization plant site was the major source of CH4 and CO2 in the groundwater system. The plant area is directly upgradient from deep groundwater, samples of which are green-yellow in colour, have a very strong odour of burnt wood, contain high concentrations of mononuclear aromatic and phenolic compounds, and extremely high concentrations of volatile fatty acids. The majority of the dissolved compounds in these groundwater samples have been shown, using laboratory microcosms, to be anaerobically biodegradable to CH4 and CO2. The biodegradable compounds, and the amounts of CH4 and CO2 produced in the microcosms, are consistent with observations from field samples.

Michigan↗
USGS2007

Hydrologic significance of carbon monoxide concentrations in ground water

Dissolved carbon monoxide (CO) is present in ground water produced from a variety of aquifer systems at concentrations ranging from 0.2 to 20 nanomoles per liter (0.0056 to 0.56 μg/L). In two shallow aquifers, one an unconsolidated coastal plain aquifer in Kings Bay, Georgia, and the other a fractured‐bedrock aquifer in West Trenton, New Jersey, long‐term monitoring showed that CO concentrations varied over time by as much as a factor of 10. Field and laboratory evidence suggests that the delivery of dissolved oxygen to the soil zone and underlying aquifers by periodic recharge events stimulates oxic metabolism and produces transiently high CO concentrations. In between recharge events, the aquifers become anoxic and more substrate limited, CO is consumed as a carbon source, and CO concentrations decrease. According to this model, CO concentrations provide a transient record of oxic metabolism affecting ground water systems after dissolved oxygen has been fully consumed. Because the delivery of oxygen affects the fate and transport of natural and anthropogenic contaminants in ground water, CO concentration changes may be useful for identifying predominantly anoxic ground water systems subject to periodic oxic or microaerophilic conditions.

Ground Water↗
USGS2003

Ground-water use, locations of production wells, and areas irrigated using ground water in 1998, middle Humboldt River basin, north-central Nevada

In 1998, ground water was being pumped from about 420 production wells in the middle Humboldt River Basin for a variety of uses. Principal uses were for agriculture, industry, mining, municipal, and power plant purposes. This report presents a compilation of the number and types of production wells, areas irrigated by ground water, and ground-water use in 14 hydrographic areas of the middle Humboldt River Basin in 1998. Annual pumping records for production wells usually are reported to the Nevada Division of Water Resources. However, operators of irrigation wells are not consistently required to report annual pumpage. Daily power-consumption and pump-discharge rates measured at 20 wells during the 1998 irrigation season and total power use at each well were used to estimate the amount of water, in feet of depth, applied to 20 alfalfa fields. These fields include about 10 percent of the total area, 36,700 acres, irrigated with ground water in the middle Humboldt River Basin. In 1998 an average of 2.0 feet of water was applied to 14 fields irrigated using center-pivot sprinkler systems, and an average of 2.6 feet of water was applied to 6 fields irrigated using wheel-line sprinkler systems. A similar approach was used to estimate the amount of water pumped at three wells using pumps powered by diesel engines. The two fields served by these three wells received 3.9 feet of water by flood irrigation during the 1998 irrigation season. The amount of water applied to the fields irrigated by center-pivot and wheel-line irrigation systems during the 1998 irrigation season was less than what would have been applied during a typical irrigation season because late winter and spring precipitation exceeded long-term monthly averages by as much as four times. As a result, the health of crops was affected by over-saturated soils, and most irrigation wells were only used sporadically in the first part of the irrigation season. Power consumption at 19 of the 20 wells in the 1994-97 irrigation seasons was 110 to 235 percent of the power consumption in the 1998 irrigation season. If the amount of water applied to fields during the 1998 irrigation season were adjusted to account for these differences in power consumption, the average amount of water applied to a field during a typical season using center-pivot and wheel-line sprinkler systems would be 3.1 feet and 3.7 feet, respectively. Total ground water pumped in the middle Humboldt River Basin during 1998 was about 298,000 acre-feet. This pumpage was distributed as follows: 78 percent for mining, 19 percent for irrigation, and 3 percent for industrial, municipal, and power plants combined. Mining pumpage is by far the largest source of ground-water use because several large gold mines have extended below local ground-water levels and the area around each mine must be dewatered in order to maintain a dry and workable mine. Total mining pumpage in 1998 was 233,000 acre-feet, of this total, 23,600 acre-feet was for consumptive use and 209,000 acre-feet was for dewatering eight mines. Excess water from the mines being dewatered was distributed as follows: 74,500 acre-feet was returned to aquifers by infiltration; 33,100 acre-feet was used for irrigation and for consumptive use at two mines and a power plant; 96,700 acre-feet was released to the Humboldt River or one of its tributaries; and 5,260 acre-feet was lost to evaporation.

Water-Resources Investigations Report↗
USGS2017

Monitoring gas and heat emissions at Norris Geyser Basin, Yellowstone National Park, USA based on a combined eddy covariance and Multi-GAS approach

We quantified gas and heat emissions in an acid-sulfate, vapor-dominated area (0.04-km 2 ) of Norris Geyser Basin, located just north of the 0.63 Ma Yellowstone Caldera and near an area of anomalous uplift. From 14 May to 3 October 2016, an eddy covariance system measured half-hourly CO 2 , H 2 O and sensible ( H ) and latent ( LE ) heat fluxes and a Multi-GAS instrument measured (1 Hz frequency) atmospheric H 2 O, CO 2 and H 2 S volumetric mixing ratios. We also measured soil CO 2 fluxes using the accumulation chamber method and temperature profiles on a grid and collected fumarole gas samples for geochemical analysis. Eddy covariance CO 2 fluxes ranged from − 56 to 885 g m − 2 d − 1 . Using wavelet analysis, average daily eddy covariance CO 2 fluxes were locally correlated with average daily environmental parameters on several-day to monthly time scales. Estimates of CO 2 emission rate from the study area ranged from 8.6 t d − 1 based on eddy covariance measurements to 9.8 t d − 1 based on accumulation chamber measurements. Eddy covariance water vapor fluxes ranged from 1178 to 24,600 g m − 2 d − 1 . Nighttime H and LE were considered representative of hydrothermal heat fluxes and ranged from 4 to 183 and 38 to 504 W m − 2 , respectively. The total hydrothermal heat emission rate ( H + LE + radiant) estimated for the study area was 11.6 MW and LE contributed 69% of the output. The mean ± standard deviation of H 2 O, CO 2 and H 2 S mixing ratios measured by the Multi-GAS system were 9.3 ± 3.1 parts per thousand, 467 ± 61 ppmv, and 0.5 ± 0.6 ppmv, respectively, and variations in the gas compositions were strongly correlated with diurnal variations in environmental parameters (wind speed and direction, atmospheric temperature). After removing ambient H 2 O and CO 2 , the observed variations in the Multi-GAS data could be explained by the mixing of relatively H 2 O-CO 2 -H 2 S-rich fumarole gases with CO 2 -rich and H 2 O-H 2 S-poor soil gases. The fumarole H 2 O/CO 2 and CO 2 /H 2 S end member ratios (101.7 and 27.1, respectively, on average) were invariant during the measurement period and fell within the range of values measured in direct fumarole gas samples. The soil gas H 2 O/CO 2 end member ratios (~ 15–30) were variable and low relative to the fumarole end member, likely resulting from water vapor loss during cooling and condensation in the shallow subsurface, whereas the CO 2 /H 2 S end member ratio was high (~ 160), presumably related to transport of CO 2 -dominated soil gas emissions mixed with trace fumarolic emissions to the Multi-GAS station. Nighttime eddy covariance ratios of H 2 O to CO 2 flux were typically between the soil gas and fumarole end member H 2 O/CO 2 ratios defined by Multi-GAS measurements. Overall, the combined eddy covariance and Multi-GAS approach provides a powerful tool for quasi-continuous measurements of gas and heat emissions for improved volcano-hydrothermal monitoring.

Wyoming↗
USGS2006

Temporal evolution of carbon budgets of the Appalachian forests in the U.S. from 1972 to 2000

Estimating dynamic terrestrial ecosystem carbon (C) sources and sinks over large areas is difficult. The scaling of C sources and sinks from the field level to the regional level has been challenging due to the variations of climate, soil, vegetation, and disturbances. As part of an effort to estimate the spatial, temporal, and sectional dimensions of the United States C sources and sinks (the U.S. Carbon Trends Project), this study estimated the forest ecosystem C sequestration of the Appalachian region (186,000 km 2 ) for the period of 1972–2000 using the General Ensemble Biogeochemical Modeling System (GEMS) that has a strong capability of assimilating land use and land cover change (LUCC) data. On 82 sampling blocks in the Appalachian region, GEMS used sequential 60 m resolution land cover change maps to capture forest stand-replacing events and used forest inventory data to estimate non-stand-replacing changes. GEMS also used Monte Carlo approaches to deal with spatial scaling issues such as initialization of forest age and soil properties. Ensemble simulations were performed to incorporate the uncertainties of input data. Simulated results show that from 1972 to 2000 the net primary productivity (NPP), net ecosystem productivity (NEP), and net biome productivity (NBP) averaged 6.2 Mg C ha −1 y −1 (±1.1), 2.2 Mg C ha −1 y −1 (±0.6), and 1.8 Mg C ha −1 y −1 (±0.6), respectively. The inter-annual variability was driven mostly by climate. Detailed C budgets for the year 2000 were also calculated. Within a total 148,000 km 2 forested area, average forest ecosystem C density was estimated to be 186 Mg C ha −1 (±20), of which 98 Mg C ha −1 (±12) was in biomass and 88 Mg C ha −1 (±13) was in litter and soil. The total simulated C stock of the Appalachian forests was estimated to be 2751 Tg C (±296), including 1454 Tg C (±178) in living biomass and 1297 Tg C (±192) in litter and soil. The total net C sequestration (i.e. NBP) of the forest ecosystem in 2000 was estimated to be 19.5 Tg C y −1 (±6.8).

Forest Ecology and Management↗
USGS2012

Linking soil moisture balance and source-responsive models to estimate diffuse and preferential components of groundwater recharge

Results are presented of a detailed study into the vadose zone and shallow water table hydrodynamics of a field site in Shropshire, UK. A conceptual model is developed and tested using a range of numerical models, including a modified soil moisture balance model (SMBM) for estimating groundwater recharge in the presence of both diffuse and preferential flow components. Tensiometry reveals that the loamy sand topsoil wets up via macropore flow and subsequent redistribution of moisture into the soil matrix. Recharge does not occur until near-positive pressures are achieved at the top of the sandy glaciofluvial outwash material that underlies the topsoil, about 1 m above the water table. Once this occurs, very rapid water table rises follow. This threshold behaviour is attributed to the vertical discontinuity in the macropore system due to seasonal ploughing of the topsoil, and a lower permeability plough/iron pan restricting matrix flow between the topsoil and the lower outwash deposits. Although the wetting process in the topsoil is complex, a SMBM is shown to be effective in predicting the initiation of preferential flow from the base of the topsoil into the lower outwash horizon. The rapidity of the response at the water table and a water table rise during the summer period while flow gradients in the unsaturated profile were upward suggest that preferential flow is also occurring within the outwash deposits below the topsoil. A variation of the source-responsive model proposed by Nimmo (2010) is shown to reproduce the observed water table dynamics well in the lower outwash horizon when linked to a SMBM that quantifies the potential recharge from the topsoil. The results reveal new insights into preferential flow processes in cultivated soils and provide a useful and practical approach to accounting for preferential flow in studies of groundwater recharge estimation.

Shropshire County↗
USGS1990

Geographic information system as country-level development and monitoring tool, Senegal example

Geographic information systems (GIS) allow an investigator the capability to merge and analyze numerous types of country-level resource data. Hypothetical resource analysis applications in Senegal were conducted to illustrate the utility of a GIS for development planning and resource monitoring. Map and attribute data for soils, vegetation, population, infrastructure, and administrative units were merged to form a database within a GIS. Several models were implemented using a GIS to: analyze development potential for sustainable dryland agriculture; prioritize where agricultural development should occur based upon a regional food budget; and monitor dynamic events with remote sensing. The steps for implementing a GIS analysis are described and illustrated, and the use of a GIS for conducting an economic analysis is outlined. Using a GIS for analysis and display of results opens new methods of communication between resource scientists and decision makers. Analyses yielding country-wide map output and detailed statistical data for each level of administration provide the advantage of a single system that can serve a variety of users.

Conference Paper↗
USGS2020

Warming of alpine tundra enhances belowground production and shifts community towards resource acquisition traits

Climate warming is expected to stimulate plant growth in high‐elevation and high‐latitude ecosystems, significantly increasing aboveground net primary production (ANPP). However, the effects of simultaneous changes in temperature, snowmelt timing, and summer water availability on total net primary production (NPP)—and elucidation of both above‐ and belowground responses—remain an important area in need of further study. In particular, measures of belowground net primary productivity (BNPP) are required to understand whether ANPP changes reflect changes in allocation or are indicative of a whole plant NPP response. Further, plant functional traits provide a key way to scale from the individual plant to the community level and provide insight into drivers of NPP responses to environmental change. We used infrared heaters to warm an alpine plant community at Niwot Ridge, Colorado, and applied supplemental water to compensate for soil water loss induced by warming. We measured ANPP, BNPP, and leaf and root functional traits across treatments after 5 yr of continuous warming. Community‐level ANPP and total NPP (ANPP + BNPP) did not respond to heating or watering, but BNPP increased in response to heating. Heating decreased community‐level leaf dry matter content and increased total root length, indicating a shift in strategy from resource conservation to acquisition in response to warming. Water use efficiency (WUE) decreased with heating, suggesting alleviation of moisture constraints that may have enabled the plant community to increase productivity. Heating may have decreased WUE by melting snow earlier and creating more days early in the growing season with adequate soil moisture, but stimulated dry mass investment in roots as soils dried down later in the growing season. Overall, this study highlights how ANPP and BNPP responses to climate change can diverge, and encourages a closer examination of belowground processes, especially in alpine systems, where the majority of NPP occurs belowground.

Colorado↗
USGS2014

Radiocarbon dating of terrestrial carbonates

Terrestrial carbonates encompass a wide range of materials that potentially could be used for radiocarbon ( 14 C) dating. Biogenic carbonates, including shells and tests of terrestrial and aquatic gastropods, bivalves, ostracodes, and foraminifera, are preserved in a variety of late Quaternary deposits and may be suitable for 14C dating. Primary calcareous deposits (marls, tufa, speleothems) and secondary carbonates (rhizoliths, fracture fill, soil carbonate) may also be targeted for dating when conditions are favorable. This chapter discusses issues that are commonly encountered in 14 C dating of terrestrial carbonates, including isotopic disequilibrium and open-system behavior, as well as methods used to determine the reliability of ages derived from these materials. Recent methodological advancements that may improve the accuracy and precision of 14 C ages of terrestrial carbonates are also highlighted.

Book chapter↗
USGS2023

Biocrusts indicators of livestock grazing effects on soil stability in sagebrush steppe: A case study from a long-term experiment in the northern Great Basin

Biocrusts are sensitive to changes in livestock grazing intensity in arid rangelands and may be useful indicators of ecosystem functions, particularly soil properties like soil stability, which may suggest the potential for soil erosion. We compared biocrust community composition and surface soil stability in a big sagebrush (Artemisia tridentata) steppe rangeland in the northwestern Great Basin in several paired sites, with or without long-term cattle grazing exclusion, and similar soils (mostly sandy loams), climate, and vegetation composition. We found that livestock grazing was associated with both lower surface soil stability and cover of several biocrust morphogroups, especially lichens, compared with sites with long-term livestock exclusion. Surface soil stability did not modify the effects of grazing on most biocrust components via interactive effects. Livestock grazing effects on total biocrust cover were partially mediated by changes in surface soil stability. Though lichens were more sensitive to grazing disturbance, our results suggest that moss (mostly Tortula ruralis in this site) might be a more readily observable indicator of grazing-related soil stability change in this area due to their relatively higher abundance compared with lichens (moss: mean, 8.5% cover, maximum, 96.1%, lichens: mean, 1.0% cover, maximum, 14.1%). These results highlight the potential for biocrust components as sensitive indicators of change in soil-related ecosystem functions in sagebrush steppe rangelands. However, further research is needed to identify relevant indicator groups across the wide range of biocrust community composition associated with site environmental characteristics, variable grazing systems, other rangeland health metrics, and other disturbance types such as wildfire.

Northern Great Basin↗
USGS2008

Coupled effect of chemotaxis and growth on microbial distributions in organic-amended aquifer sediments: Observations from laboratory and field studies

The inter-relationship of growth and chemotactic response exhibited by two common soil-inhabiting bacteria was investigated to determine its impact on bacterial migration. Filter-chambers were used to simulate aquifer sediments characterized by vertical gradients of organic contaminants in both artificial groundwater flow systems in the laboratory and within the screened intervals of observation wells in a sandy aquifer. A labile model contaminant (acetate) was added to the top compartments of the three-part chambers, whereas bacteria with a demonstrated propensity to grow on and chemotactically respond to acetate were introduced to the lower compartments. The motility and chemotactic response of Pseudomonas putida F1 resulted in 40 to 110% greater abundances in the upper compartments and concomitant 22 to 70% depletions in the lower compartments relative to the nonchemotactic controls over 2 days. Bacteria were in greatest abundance within the sand plug that separated the upper and lower compartments where sharp acetate gradients induced a strong chemotactic response. This observation was consistent with predictions from a mathematical model. In agreement with the laboratory results, the down-well filter-chamber incubations with Pseudomonas stutzeri in the aquifer indicated that 91% fewer bacteria resided in the lower compartment than the control experiment without acetate at 15 h. The combination of chemotaxis and growth greatly accelerated the migration of bacteria toward and subsequent abundance at the higher acetate concentration.

Environmental Science & Technology↗
USGS2010

Shallow subsurface storm flow in a forested headwater catchment: Observations and modeling using a modified TOPMODEL

Transient, perched water tables in the shallow subsurface are observed at the South Fork Brokenback Run catchment in Shenandoah National Park, Virginia. Crest piezometers installed along a hillslope transect show that the development of saturated conditions in the upper 1.5 m of the subsurface is controlled by total precipitation and antecedent conditions, not precipitation intensity, although soil heterogeneities strongly influence local response. The macroporous subsurface storm flow zone provides a hydrological pathway for rapid runoff generation apart from the underlying groundwater zone, a conceptualization supported by the two‐storage system exhibited by hydrograph recession analysis. A modified version of TOPMODEL is used to simulate the observed catchment dynamics. In this model, generalized topographic index theory is applied to the subsurface storm flow zone to account for logarithmic storm flow recessions, indicative of linearly decreasing transmissivity with depth. Vertical drainage to the groundwater zone is required, and both subsurface reservoirs are considered to contribute to surface saturation.

Water Resources Research↗
USGS2026

Hydrologic dynamics of ephemerally flooded playas in a dryland environment

Ephemerally flooded playas are common in the southwestern United States and globally in drylands. Often formed in closed basins, playas are depressions which inundate infrequently from local precipitation and streamflow produced near the playa or from upland areas. Few studies have quantified the hydrologic connectivity between upland catchments and playas using observations. Here, we used rain gauge-corrected precipitation from weather radar and water level measurements in 18 playas of the Chihuahuan Desert to identify precipitation thresholds leading to playa inundation over a 6.4-year period. Geospatial data sets on topography, soil properties, and vegetation cover were employed to determine the controls on inundation. Only 9.4% of all precipitation events above 1 mm led to inundation, with 69.8% of all inundations occurring during the North American monsoon (NAM, July-September). Mean and standard deviations (Std) of runoff ratios at all playas were 2.74 ± 4.08% and 3.29 ± 5.19% for annual and NAM periods. At the annual scale, playa inundation occurred when mean precipitation thresholds of 18.3 ± 7.5 mm (event total) and 12.0 ± 4.5 mm/hr (60-min intensity) were exceeded. Across all playas, inundation occurrence and volume were related most strongly to precipitation metrics and catchment area, with secondary controls of soil and terrain properties. The explanatory power of the derived regressions describing the inundation response across the playas were significantly improved when considering their geological origin. As a result, the inundation response classification system could be applied to ephemeral playas in other arid and semiarid landscapes.

New Mexico↗
USGS2010

Interpretation of surface flux measurements in heterogeneous terrain during the Monsoon '90 experiment

A network of 9-m-tall surface flux measurement stations were deployed at eight sparsely vegetated sites during the Monsoon '90 experiment to measure net radiation, Q , soil heat flux, G , sensible heat flux, H (using eddy correlation), and latent heat flux, λ E (using the energy balance equation). At four of these sites, 2-m-tall eddy correlation systems were used to measure all four fluxes directly. Also a 2-m-tall Bowen ratio system was deployed at one site. Magnitudes of the energy balance closure ( Q + G + H + λ E ) increased as the complexity of terrain increased. The daytime Bowen ratio decreased from about 10 before the monsoon season to about 0.3 during the monsoons. Source areas of the measurements are developed and compared to scales of heterogeneity arising from the sparse vegetation and the topography. There was very good agreement among simultaneous measurements of Q with the same model sensor at different heights (representing different source areas), but poor agreement among different brands of sensors. Comparisons of simultaneous measurements of G suggest that because of the extremely small source area, extreme care in sensor deployment is necessary for accurate measurement in sparse canopies. A recently published model to estimate fetch is used to interpret measurements of H at the 2 m and 9 m heights. Three sites were characterized by undulating topography, with ridgetops separated by about 200–600 m. At these sites, sensors were located on ridgetops, and the 9-m fetch included the adjacent valley, whereas the 2-m fetch was limited to the immediate ridgetop and hillside. Before the monsoons began, vegetation was mostly dormant, the watershed was uniformly hot and dry, and the two measurements of H were in close agreement. After the monsoons began and vegetation fully matured, the 2-m measurements of H were significantly greater than the 9-m measurements, presumably because the vegetation in the valleys was denser and cooler than on the ridgetops and hillsides. At one lowland site with little topographic relief, the vegetation was more uniform, and the two measurements of H were in close agreement during peak vegetation. Values of λ E could only be compared at two sites, but the 9-m values were greater than the 2-m values, suggesting λ E from the dense vegetation in the valleys was greater than elsewhere.

Water Environment Research↗
USGS2008

Users Manual for the Geospatial Stream Flow Model (GeoSFM)

The monitoring of wide-area hydrologic events requires the manipulation of large amounts of geospatial and time series data into concise information products that characterize the location and magnitude of the event. To perform these manipulations, scientists at the U.S. Geological Survey Center for Earth Resources Observation and Science (EROS), with the cooperation of the U.S. Agency for International Development, Office of Foreign Disaster Assistance (USAID/OFDA), have implemented a hydrologic modeling system. The system includes a data assimilation component to generate data for a Geospatial Stream Flow Model (GeoSFM) that can be run operationally to identify and map wide-area streamflow anomalies. GeoSFM integrates a geographical information system (GIS) for geospatial preprocessing and postprocessing tasks and hydrologic modeling routines implemented as dynamically linked libraries (DLLs) for time series manipulations. Model results include maps that depicting the status of streamflow and soil water conditions. This Users Manual provides step-by-step instructions for running the model and for downloading and processing the input data required for initial model parameterization and daily operation.

Open-File Report↗
USGS2008

TRIGRS - A Fortran Program for Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Analysis, Version 2.0

The Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Model (TRIGRS) is a Fortran program designed for modeling the timing and distribution of shallow, rainfall-induced landslides. The program computes transient pore-pressure changes, and attendant changes in the factor of safety, due to rainfall infiltration. The program models rainfall infiltration, resulting from storms that have durations ranging from hours to a few days, using analytical solutions for partial differential equations that represent one-dimensional, vertical flow in isotropic, homogeneous materials for either saturated or unsaturated conditions. Use of step-function series allows the program to represent variable rainfall input, and a simple runoff routing model allows the user to divert excess water from impervious areas onto more permeable downslope areas. The TRIGRS program uses a simple infinite-slope model to compute factor of safety on a cell-by-cell basis. An approximate formula for effective stress in unsaturated materials aids computation of the factor of safety in unsaturated soils. Horizontal heterogeneity is accounted for by allowing material properties, rainfall, and other input values to vary from cell to cell. This command-line program is used in conjunction with geographic information system (GIS) software to prepare input grids and visualize model results.

Open-File Report↗