SEARCH · Geology Reports
Results for “Open File Report”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A Compilation of Gas Emission-Rate Data from Volcanoes of Cook Inlet (Spurr, Crater Peak, Redoubt, Iliamna, and Augustine) and Alaska Peninsula (Douglas, Fourpeaked, Griggs, Mageik, Martin, Peulik, Ukinrek Maars, and Veniaminof), Alaska, from 1995-2006
INTRODUCTION This report presents gas emission rates from data collected during numerous airborne plume-measurement flights at Alaskan volcanoes since 1995. These flights began in about 1990 as means to establish baseline values of volcanic gas emissions during periods of quiescence and to identify anomalous levels of degassing that might signal the beginning of unrest. The primary goal was to make systematic measurements at the major volcanic centers around the Cook Inlet on at least an annual basis, and more frequently during periods of unrest and eruption. A secondary goal was to measure emissions at selected volcanoes on the Alaska Peninsula. While the goals were not necessarily met in all cases due to weather, funding, or the availability of suitable aircraft, a rich dataset of quality measurements is the legacy of this continuing effort. An earlier report (Doukas, 1995) presented data for the period from 1990 through 1994 and the current report provides data through 2006. This report contains all of the available measurements for SO2, CO2, and H2S emission rates in Alaska determined by the U. S. Geological Survey from 1995 through 2006; airborne measurements for H2S began in Alaska in 2001. The results presented here are from Cook Inlet volcanoes at Spurr, Crater Peak, Redoubt, Iliamna, and Augustine and cover periods of unrest at Iliamna (1996) and Spurr (2004-2006) as well as the 2006 eruption of Augustine. Additional sporadic measurements at volcanoes on the Alaska Peninsula (Douglas, Martin, Mageik, Griggs, Veniaminof, Ukinrek Maars, Peulik, and Fourpeaked during its 2006 unrest) are also reported here.
Simulation of contributing areas and surface-water leakage to potential replacement wells near the community of New Post, Sawyer County, Wisconsin, by means of a two-dimensional ground-water flow model
A two-dimensional, steady-state ground-water-flow model of the shallow ground-water-flow system near the community of New Post, Sawyer County, Wis., was refined from an existing model of the area. Hydraulic-conductivity and recharge values were not changed from the existing model for the scenario simulations described in this report. Rather, the model was refined by adding detail along the Chippewa Flowage and then was used to simulate contributing areas for three potential replacement wells pumping 30,000 gallons per day. The model also was used to simulate potential surface-water leakage out of the Chippewa Flowage captured by replacement-well pumping. A range in resistance to vertical ground-water flow was simulated along the Chippewa Flowage for each potential replacement-well location to bound the potential effects of representing three-dimensional flow with a two-dimensional model. Results indicate that pumping from a replacement well sited about 130 feet from the Chippewa Flowage could capture as much as 39 percent of the total pumping from the flowage. Pumping from either of two potential replacement wells sited at least 400 feet from the Chippewa Flowage did not induce surface-water leakage out of the flowage regardless of the resistance applied along the flowage for simulations described in this report.
Flood of May 6, 2007, Willow Creek, west-central Iowa
Major flooding occurred May 6, 2007, in the Willow Creek drainage basin in Harrison County following severe thunderstorm activity over west-central Iowa. More than 7 inches of rain were recorded for the 72-hour period ending 7 a.m., May 6, at the Logan, Iowa weather station. The peak discharge in Willow Creek at Medford Avenue near Missouri Valley, Iowa, was 17,000 cubic feet per second. The recurrence interval of the flood is 160 years, which was estimated using regional regression equations. Information about the basin, the storms, the flooding, and a profile of high-water marks measured at 10 locations along Willow Creek between the mouth at the Boyer River and State Highway 37 in Monona County, a distance of almost 33 river miles, are presented in this report.
The Ecology of Parasite-Host Interactions at Montezuma Well National Monument, Arizona - Appreciating the Importance of Parasites
Although parasites play important ecological roles through the direct interactions they have with their hosts, historically that fact has been underappreciated. Today, scientists have a growing appreciation of the scope of such impacts. Parasites have been reported to dominate food webs, alter predator-prey relationships, act as ecosystem engineers, and alter community structure. In spite of this growing awareness in the scientific community, parasites are still often neglected in the consideration of the management and conservation of resources and ecosystems. Given that at least half of the organisms on earth are probably parasitic, it should be evident that the ecological functions of parasites warrant greater attention. In this report, we explore different aspects of parasite-host relationships found at a desert spring pond within Montezuma Well National Monument, Arizona. In three separate but related chapters, we explore interactions between a novel amphipod host and two parasites. First, we identify how host behavior responds to this association and how this association affects interactions with both invertebrate non-host predators and a vertebrate host predator. Second, we look at the human dimension, investigating how human recreation can indirectly affect patterns of disease by altering patterns of vertebrate host space use. Finally - because parasites and diseases are of increasing importance in the management of wildlife species, especially those that are imperiled or of management concern - the third chapter argues that research would benefit from increased attention to the statistical analysis of wildlife disease studies. This report also explores issues of statistical parasitology, providing information that may better inform those designing research projects and analyzing data from studies of wildlife disease. In investigating the nature of parasite-host interactions, the role that relationships play in ecological communities, and how human activities alter these associations, scientists usually make inferences by methods of statistical hypotheses testing. This type of hypothesis testing places additional importance on the analysis and interpretation of parasite-host interactions. We address these ideas in this report, focusing on the following questions: (1) How do two parasites with complex life cycles alter the behavior of a novel amphipod host, and how do host and non-host predators respond to infected amphipod prey? (2) Does human recreation affect spatial patterns of infection in an otherwise natural ecosystem? (3) How is hypothesis-testing applied in studies of wildlife disease? (4) What conclusions can we make about the relative usefulness of these methodologies? and (5) How can the analysis and interpretation of wildlife disease studies be improved? Each chapter of this report contains its own literature-cited section, with tables included in appendixes at the end of the full report.
CoalVal-A coal resource valuation program
CoalVal is a menu-driven Windows program that produces cost-of-mining analyses of mine-modeled coal resources. Geological modeling of the coal beds and some degree of mine planning, from basic prefeasibility to advanced, must already have been performed before this program can be used. United States Geological Survey mine planning is done from a very basic, prefeasibility standpoint, but the accuracy of CoalVal's output is a reflection of the accuracy of the data entered, both for mine costs and mine planning. The mining cost analysis is done by using mine cost models designed for the commonly employed, surface and underground mining methods utilized in the United States. CoalVal requires a Microsoft Windows? 98 or Windows? XP operating system and a minimum of 1 gigabyte of random access memory to perform operations. It will not operate on Microsoft Vista?, Windows? 7, or Macintosh? operating systems. The program will summarize the evaluation of an unlimited number of coal seams, haulage zones, tax entities, or other area delineations for a given coal property, coalfield, or basin. When the reader opens the CoalVal publication from the USGS website, options are provided to download the CoalVal publication manual and the CoalVal Program. The CoalVal report is divided into five specific areas relevant to the development and use of the CoalVal program: 1. Introduction to CoalVal Assumptions and Concepts. 2. Mine Model Assumption Details (appendix A). 3. CoalVal Project Tutorial (appendix B). 4. Program Description (appendix C). 5. Mine Model and Discounted Cash Flow Formulas (appendix D). The tutorial explains how to enter coal resource and quality data by mining method; program default values for production, operating, and cost variables; and ones own operating and cost variables into the program. Generated summary reports list the volume of resource in short tons available for mining, recoverable short tons by mining method; the seam or property being mined; operating cost per ton; and discounted cash flow cost per ton to mine and process the resources. Costs are calculated as loaded in a unit train, free-on-board the tipple, at a rate of return prescribed by the evaluator. The recoverable resources (in short tons) may be grouped by incremental cost over any range chosen by the user. For example, in the Gillette coalfield evaluation, the discounted cash flow mining cost (at an 8 percent rate of return) and its associated tonnage may be grouped by any applicable increment (for example, $0.10 per ton, $0.20 per ton, and so on) and using any dollar per ton range that is desired (for example, from $4.00 per ton to $15.00 per ton). This grouping ability allows the user to separate the coal reserves from the nonreserve resources and to construct cost curves to determine the effects of coal market fluctuations on the availability of coal for fuel whether for the generation of electricity or for coal-to-liquids processes. Coking coals are not addressed in this report.
Connecticut Highlands technical report— Documentation of the regional rainfall-runoff model
This report provides the supporting data and describes the data sources, methodologies, and assumptions used in the assessment of existing and potential water resources of the Highlands of Connecticut and Pennsylvania (referred to herein as the “Highlands”). Included in this report are Highlands groundwater and surface-water use data and the methods of data compilation. Annual mean streamflow and annual mean base-flow estimates from selected U.S. Geological Survey (USGS) gaging stations were computed using data for the period of record through water year 2005. The methods of watershed modeling are discussed and regional and sub-regional water budgets are provided. Information on Highlands surface-water-quality trends is presented. USGS web sites are provided as sources for additional information on groundwater levels, streamflow records, and ground- and surface-water-quality data. Interpretation of these data and the findings are summarized in the Highlands study report.
Water-level data for the Albuquerque Basin and adjacent areas, central New Mexico, period of record through September 30, 2009
The Albuquerque Basin, located in central New Mexico, is about 100 miles long and 25 to 40 miles wide. The basin is defined as the extent of consolidated and unconsolidated deposits of Tertiary and Quaternary age that encompass the structural Rio Grande Rift within the basin. Drinking-water supplies throughout the basin were obtained solely from groundwater resources until December 2008, when surface water from the Rio Grande began being treated and integrated into the system. An increase of about 20 percent in the population from 1990 to 2000 also resulted in an increased demand for water. A network of wells was established to monitor changes in groundwater levels throughout the basin from April 1982 through September 1983. This network consisted of 6 wells with analog-to-digital recorders and 27 wells where water levels were measured monthly in 1983. Currently (2009), the network consists of 131 wells and piezometers. This report presents water-level data collected by U.S. Geological Survey personnel at 123 sites through water year 2009. In addition, data from four wells (Sites 140, 147, 148, and 149) owned, maintained, and measured by Sandia National Laboratories and three from Kirtland Air Force Base (Sites 119, 125, and 126) are presented in this report.
Model of whooping crane energetics as foundation for development of a method to assess potential take during migration
A whooping crane energetic model was developed as a component of a larger effort to ascertain potential take, as defined by the Endangered Species Act, of whooping cranes from proposed development of wind-energy infrastructure in the Great Plains of North America. The primary objectives of this energetic model were to (1) predict extra flight energy that whooping cranes may require to find suitable migration stopover sites if they are unable to use a primary site; and (2) express energy expended as additional time required to replenish lipid reserves used to fuel flight. The energetic model is based on three elements related to energy: expenditure of energy, intake of energy, and constraints to energy intake. The energetic model estimates each element and recognizes interactions among them. This framework will be most useful when integrated into a migration model that predicts incidence of avoidance of wind towers by whooping cranes and distances they might fly to find alternative stopover habitat. This report details work conducted in accordance with the U.S. Geological Survey and U.S. Fish and Wildlife Service Quick Response Program funded in fiscal year 2011 and will serve as a final report.
Miscellaneous geochemical data from waters in the Upper Animas River Watershed, Colorado
This report releases geochemistry data in waters from the upper Animas River watershed that have been analyzed by inductively coupled plasma–mass spectrometry. These samples were collected at various sites and at various dates (41 sites and 86 samples from 2008 to 2010). A main data table is provided and the text discusses the sampling methods and locations in relation to other published reports.
Change in the length of the southern section of the Chandeleur Islands oil berm, January 13, 2011, through September 3, 2012
On April 20, 2010, an explosion on the Deepwater Horizon oil rig drilling at the Macondo Prospect site in the Gulf of Mexico resulted in a marine oil spill that continued to flow through July 15, 2010. One of the affected areas was the Breton National Wildlife Refuge, which consists of a chain of low-lying islands, including Breton Island and the Chandeleur Islands, and their surrounding waters. The island chain is located approximately 115–150 kilometers (km) north-northwest of the spill site. A sand berm was constructed seaward of, and on, the island chain. Construction began at the northern end of Chandeleur Islands in June 2010 and ended in April 2011 after 14 km of berm had been constructed. The berm consisted of three distinct sections based on where the berm was placed relative to the islands. The northern section of the berm was built in open water on a submerged portion of the Chandeleur Islands platform. The middle section was built approximately 70–90 meters (m) seaward of the Chandeleur Islands. The southern section was built on the islands’ beaches. Repeated Landsat and SPOT satellite imagery and airborne light detection and ranging (lidar) were used to observe the disintegration of the berm over time. The methods used to analyze the remotely sensed data and the resulting, derived data for the southern section are reported.
Performance evaluation of five turbidity sensors in three primary standards
This report is temporarily unavailable.
Air- and stream-water-temperature trends in the Chesapeake Bay region, 1960-2014
Water temperature is a basic, but important, measure of the condition of all aquatic environments, including the flowing waters in the streams that drain our landscape and the receiving waters of those streams. Climatic conditions have a strong influence on water temperature, which is therefore naturally variable both in time and across the landscape. Changes to natural water-temperature regimes, however, can result in a myriad of effects on aquatic organisms, water quality, circulation patterns, recreation, industry, and utility operations. For example, most species of fish, insects, and other organisms, as well as aquatic vegetation, are highly dependent on water temperature. Warming waters can result in shifts in floral and faunal species distributions, including invasive species and pathogens previously unable to inhabit the once cooler streams. Many chemical processes are temperature dependent, with reactions occurring faster in warmer conditions, leading to degraded water quality as contaminants are released into waterways at greater rates. Circulation patterns in receiving waters, such as bays and estuaries, can change as a result of warmer inflows from streams, thereby affecting organisms in those receiving waters. Changes in abundance of some aquatic species and (or) degradation of water quality can reduce the recreational value of water bodies as waters are perceived as less desirable for water-related activities or as sportfish become less available for anglers. Finally, increasing water temperatures can affect industry and utilities as the thermal capacity is reduced, making the water less effective for cooling purposes. Chesapeake Bay is the largest estuary in the United States. Eutrophication, the enrichment of a water body with excess nutrients, has plagued the bay for decades and has led to extensive restoration efforts throughout the bay watershed. The warming of stream water can exacerbate eutrophication through increased release of nutrients from in-stream sediments, so understanding changes in stream-water temperature throughout the bay watershed is critical to resource managers seeking to restore the bay ecosystem. The U.S. Environmental Protection Agency (EPA) uses indicators that “represent the state or trend of certain environmental or societal conditions … to track and better understand the effects of changes in the Earth’s climate” (U.S. Environmental Protection Agency, 2014). Updates to these indicators are published biennially by the EPA. The U.S. Geological Survey (USGS), in cooperation with the EPA, has completed analyses of air- and stream-water-temperature trends in the Chesapeake Bay region to be included as an indicator in a future release of the EPA report.
Algorithms used in the Airborne Lidar Processing System (ALPS)
The Airborne Lidar Processing System (ALPS) analyzes Experimental Advanced Airborne Research Lidar (EAARL) data—digitized laser-return waveforms, position, and attitude data—to derive point clouds of target surfaces. A full-waveform airborne lidar system, the EAARL seamlessly and simultaneously collects mixed environment data, including submerged, sub-aerial bare earth, and vegetation-covered topographies. ALPS uses three waveform target-detection algorithms to determine target positions within a given waveform: centroid analysis, leading edge detection, and bottom detection using water-column backscatter modeling. The centroid analysis algorithm detects opaque hard surfaces. The leading edge algorithm detects topography beneath vegetation and shallow, submerged topography. The bottom detection algorithm uses water-column backscatter modeling for deeper submerged topography in turbid water. The report describes slant range calculations and explains how ALPS uses laser range and orientation measurements to project measurement points into the Universal Transverse Mercator coordinate system. Parameters used for coordinate transformations in ALPS are described, as are Interactive Data Language-based methods for gridding EAARL point cloud data to derive digital elevation models. Noise reduction in point clouds through use of a random consensus filter is explained, and detailed pseudocode, mathematical equations, and Yorick source code accompany the report.
Agricultural return flow dynamics on a reach of the East River, Colorado, as assessed by mass balance
The U.S. Geological Survey, in cooperation with the Upper Gunnison River Water Conservancy District, studied historical streamflow in a reach of the East River, Colorado, to gain a preliminary understanding of return flow dynamics. Return flow is agricultural irrigation water that is not consumed by evapotranspiration and instead reaches streams by surface and subsurface flow paths. The study reach had a contributing area of 50 square miles and contained 5.23 square miles of pastures irrigated with water diverted from the East River and its tributaries. By comparing upstream inflows to downstream outflows, the net water balance of the study reach from 1994 to 2023 was assessed. Two general hydrologic conditions for the study reach were identified. One hydrologic condition was characterized by a net loss or consumption of water, termed here as general deficit. This general deficit condition extended about 16 years, from 1997 to 2012. During general deficit years, there was usually a notable net loss of streamflow from April through July, and a small net gain, possibly related to return flows, occurred in August about 75 days after the minimums for losses. The second hydrologic condition was characterized by a net gain of water, termed here as general surplus. This second condition extended about 10 years, from 2014 to 2023. During general surplus years, two separate transitions from net loss to net gain commonly occurred during June through August. Losses during general surplus years were smaller than losses during general deficit years, the respective gains were larger, and times between losses and gains were about 18 and 22 days. Differences between the two hydrologic conditions could reflect interactions among irrigation water, available capacity to store additional shallow groundwater, and streamflow. However, deciphering the causes for the shifts between the two general hydrologic conditions was beyond the scope of this report.
Preliminary report on the Passamaquoddy bedrock survey, July-August, 1951
In order to understand the results of the Passamaquoddy bedrock survey and the details of the method of obtaining them, it is desirable to have, in outline, a general idea of the methods and their application. In this part of the report a general account of the operation will be developed. The details will be found in subsequent parts of the report. At this point a statement of the general objective and some mention of the plans for reaching it are in order. The purpose of the Passamaquoddy survey was to determine the submarine geology in certain areas of Passamaquoddy and Cobscook Bays--the sea-bottom topography, the bedrock topography, the thickness of sediment overlying the bedrock beneath the sea, and the type of sediment. The information is needed for the planning of major engineering structures that may be built in the area. It developed in planning the study that detailed surveys could be limited to several areas where dams may be located. To determine bottom or bedrock topography, elevations of each were determined by sonic methods at a number of closely spaced locations (about 400 feet apart), evenly distributed on range lines 1,000 or 800 feet apart, in each of eight areas. Contour lines were then drawn to produce the desired topographic maps. Sonic soundings are necessarily referred to the existing water surface. To ascertain specific elevations in an area of large tidal variations is a complex problem. The details are discussed in the section on Vertical Control by Charles E. Knox (part 8). The basic datum is mean low water as determined by the U. S. Coast and Geodetic Survey. Equally important is the accurate positioning horizontally of each sounding location or fix. All such positioning was by the use of the standard three point fix procedure, using sextants. A net of shore points tied to the first-order control net of the Coast and Geodetic Survey was set up for this purpose, and all positions were thus accurately located. These problems are discussed in a section on Horizontal Control by Norman Duckworth (part 7). The general planning was done in conferences held in May 1951 at the Boston office of the Corps of Engineers, and in Eastport, Maine, after a brief reconnaissance of the area. A detailed account of the conferences is given in a memorandum by Herman J. Kropper of the New England Division, Corps of Engineers, reproduced in this report as part 4. Detailed survey procedures were developed on May 18, 1951, at a conference attended by P. J. A. Scott and Norman Duckworth of the Corps of Engineers and W. O. Smith of the Geological Survey. In order to make the necessary geophysical interpretation of the sound records, adequate geologic control had to be established. A preliminary field study of the geology was made by G. G. Parker of the Geological Survey during the period May 15-17, 1951. Subsequently Dr. T. E. Upson of the Geological Survey made the detailed geologic study required for the project. Two sonar units were used for the survey. One was a low-frequency high-power sonar unit developed by the Edo Corp. to meet specifications established by the Geological Survey. It was used to collect the bulk of the bedrock and bottom data. The other, of higher frequency and lower power, was manufactured by Bludworth Marine, Inc., end was required for adequate determination of water depths in shoal areas. The Edo equipment is described by Dr. Charles E. Mongan, Jr., in part 6 of this report.
Photogeologic maps of the Verdure 1, 2, 4, 6, 7, and 8 quadrangles, Utah and Colorado
Base maps compiled by Soil Conservation Service, U.S. Department of Agriculture. These maps are compilations of photogeology and surface geology, Colorado Plateau area, United States. They are also known as: Trace Elements Memorandum Report 399 (Verdure 1) Trace Elements Memorandum Report 406 (Verdure 2) Trace Elements Memorandum Report 438 (Verdure 4) Trace Elements Memorandum Report 405 (Verdure 6) Trace Elements Memorandum Report 395 (Verdure 7) Trace Elements Memorandum Report 403 (Verdure 8)
Memorandum on the ground-water resources of the Horse Creek and Cherry Creek drainage basins, Wyoming
This report is one of several that are being made by the United States Geological Survey as part of the program of the Department of the Interior for the control, conservation, development, and use of the water resources of the Missouri River basin. The purpose of this report is to present an annotated bibliography of all existing reports pertaining to ground-water supplies in the area reported upon; to collect and analyze all data on public, industrial, and irrigation pumping from wells that are not covered by previous reports; to indicate areas where additional large-scale pumping might be undertaken; to estimate the possibility of depletion of stream flow by ground-water pumping from the developed areas and from areas where large-scale pumping maybe undertaken in the future; to point out areas where aquifers might be artificially recharged; and to recommend areas where detailed ground-water studies should be made, indicating the studies needed. The writer spent approximately 2 weeks in the field during June 1952 evaluating the results of previous studies to determine their adequacy with respect to the purpose of this report. It was found that the previous studies in the area adequately covered the ground-water conditions for this purpose; consequently, the following discussion is abstracted largely from reports covering those studies.