Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Information Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources
USGS2013

Vs30 and spectral response from collocated shallow, active- and passive-source Vs data at 27 sites in Puerto Rico

Shear‐wave velocity (V S ) and time‐averaged shear‐wave velocity to 30 m depth (V S30 ) are the key parameters used in seismic site response modeling and earthquake engineering design. Where V S data are limited, available data are often used to develop and refine map‐based proxy models of V S30 for predicting ground‐motion intensities. In this paper, we present shallow V S data from 27 sites in Puerto Rico. These data were acquired using a multimethod acquisition approach consisting of noninvasive, collocated, active‐source body‐wave (refraction/reflection), active‐source surface wave at nine sites, and passive‐source surface‐wave refraction microtremor (ReMi) techniques. V S ‐versus‐depth models are constructed and used to calculate spectral response plots for each site. Factors affecting method reliability are analyzed with respect to site‐specific differences in bedrock V S and spectral response. At many but not all sites, body‐ and surface‐wave methods generally determine similar depths to bedrock, and it is the difference in bedrock V S that influences site amplification. The predicted resonant frequencies for the majority of the sites are observed to be within a relatively narrow bandwidth of 1–3.5 Hz. For a first‐order comparison of peak frequency position, predictive spectral response plots from eight sites are plotted along with seismograph instrument spectra derived from the time series of the 16 May 2010 Puerto Rico earthquake. We show how a multimethod acquisition approach using collocated arrays compliments and corroborates V S results, thus adding confidence that reliable site characterization information has been obtained.

Bulletin of the Seismological Society of America↗
USGS2022

DevelNet: Earthquake detection on Develocorder films with deep learning: Application to the rangely earthquake control experiment

There exists over a century of instrumental seismic data; however, most seismograms recorded before the 1980s are only available in analog form. Although analog seismograms are of great value, they are underutilized due to the difficulties of making quantitative measurements on the original media and in converting them to digital time series. In this study, we present an alternative workflow, based on deep learning, to reconstruct an earthquake catalog from images of analog data without conversion to vector time series. We trained a convolutional neural network—DevelNet, using synthetic analog data to detect earthquakes on scanned multichannel Develocorder film images. We then developed an image‐based processing workflow to measure arrival times, locate, and determine the magnitudes of earthquakes in the data. We demonstrate the performance of this approach on two years of continuous Develocorder film recordings from the Rangely earthquake control experiment in the mid‐1970s. Our approach detects twice the number of events reported in the original catalog ( Raleigh et al. , 1976 ). This demonstrates that DevelNet efficiently detects earthquakes from Develocorder film scans, performs consistently over time, and is robust to changes in network geometry. Our locations generally agree with the original study, although the automatically measured arrival times are less precise than manual reading, leading to increased location scatter. Our automatic workflow of Develocorder films rivals the performance of skilled analysts in earthquake detection, but with minimal human intervention. This image‐based processing offers a new approach for effectively and efficiently extracting earthquake information from analog seismic data.

Bulletin of the Seismological Society of America↗
USGS1915

Guidebook of the western United States: Part B - The overland route, with a side trip to Yellowstone Park

The United States of America comprise an area so vast in extent and so diverse in natural features as well as in characters due to human agency that the American citizen who knows thoroughly his own country must have traveled widely and observed wisely. To 'know America first' is a patriotic obligation, but to meet this obligation the railroad traveler needs to have his eyes directed toward the more important or essential things within his field of vision and then to have much that he sees explained by what is unseen in the swift passage of the train. Indeed, many things that attract his attention are inexplicable except as the story of the past is available to enable him to interpret the present. Herein lie the value and the charm of history, whether human or geologic. The present stimulus given to travel in the home country will encourage many thousands of Americans to study geography at first hand. To make this study most profitable the traveler needs a handbook that will answer the questions that come to his mind so readily along the way. Furthermore, the aim of such a guide should be to stimulate the eye in the selection of the essentials in the scene that so rapidly unfolds itself in the crossing of the continent. In recognition of the opportunity afforded in 1915 to render service of this kind to an unusually large number of American citizens as well as to visitors from other countries, the United States Geological Survey has prepared a series of guidebooks covering four of the older railroad routes west of the Mississippi. These books are educational in purpose, but the method adopted is to entertain the traveler by making more interesting what he sees from the car window. The plan of the series is to present authoritative information that may enable the reader to realize adequately the scenic and material resources of the region he is traversing, to comprehend correctly the basis of its development, and above all to appreciate keenly the real value of the country he looks out upon, not as so many square miles of territory represented on the map in a railroad folder by meaningless spaces, but rather as land - real estate, if you please - varying widely in present appearance because differing largely in its history and characterized by even greater variation in values because possessing diversified natural resources. One region may be such as to afford a livelihood for only a pastoral people; another may present opportunity for intensive agriculture; still another may contain hidden stores of mineral wealth that may attract large industrial development; and taken together these varied resources afford the promise of long-continued prosperity for this or that State. Items of interest in civic development or references to significant epochs in the record of discovery and settlement may be interspersed with explanations of mountain and valley or statements of geologic history. In a broad way, the story of the West is a unit, and every chapter should be told in order to meet fully the needs of the tourist who aims to understand all that he sees. To such a traveler-reader this series of guidebooks is addressed. To this interpretation of our own country the United States Geological Survey brings the accumulated data of decades of pioneering investigation, and the present contribution is only one type of return to the public which has supported this scientific work under the Federal Government. In preparing the description of the country traversed by the Overland Route the geographic and geologic information already published as well as unpublished material in the possession of the Geological Survey has been utilized, but to supplement this material Messrs. Lee, Stone, and Gale made a field examination of the entire route in 1914, Mr. Lee working between Omaha and Ogden, Mr. Stone between Ogden and Yellowstone, and Mr. Gale between Ogden and San Francisco. Information has been furnished by Profs. J. C. Merriam a

Bulletin↗
USGS1952

Manganese, iron, and barite deposits of the James River-Roanoke River district, Virginia

During the period 1940-1942 the United States Geological Survey made a geologic study of the manganese deposits of the James River-Roanoke River district, in the general vicinity of Lynchburg, Va. (fig. 1), as part of its program of strategic minerals investigations. This work was done by the writer and supervised by D. F. Hewett. John Rodgers and W. R. Wagner assisted during part of the project. In the course of the investigation, the geology was mapped over an area about 60 miles long and several miles wide, from Altavista on the Roanoke River northeast to Howardsville on the James River (fig. 2); and the mineral deposits-principally manganese, iron, and barite-were studied. After completion of the geologic studies, the writer participated in an exploration project conducted by the United States Bureau of Mines in the early summer of 1942 at five manganese deposits in the district. This preliminary report presents the essential information concerning the mineral deposits of the region in advance of the more comprehensive report on the geology and mineral deposits that will be published as a bulletin of the U.S. Geological Survey.

Virginia↗
USGS2026

Evaluation of proxies of the averaged shear-wave velocity to a depth of 30 m (Vs30) for site characterization in Italy

Near-surface geological conditions strongly influence seismic ground motion, and the time-averaged shear-wave velocity to a depth of 30 m ( Vs 30) is a commonly used parameter to describe site effects in ground-motion models applied in shaking scenarios and seismic hazard assessment. However, the limited availability of direct Vs measurements has led to the growing use of morphometric and geological proxies. This study examines the relationship between Vs 30 and a comprehensive set of topographic and lithological proxies across Italy, utilising a dataset comprising approximately 15,000 Vs profiles distributed across Italy compiled from seismic microzonation studies, regional databases, and the ITalian ACcelerometric Archive (ITACA). Topographic proxies were derived from the high-resolution (10 m) national digital terrain model, resampled to multiple spatial scales (150–1000 m), while lithological information was obtained from the national maps and complemented by global soil thickness data. This study provides the first nationwide assessment of multi-proxy correlations with Vs30 in Italy and establishes the foundation for the development of a robust, spatially continuous, and lithologically informed Vs 30 model.

Bulletin of Geophysics and Oceanography↗
USGS1998

KERNELHR: A program for estimating animal home ranges

Kernel methods are state of the art for estimating animal home-range area and utilization distribution (UD). The KERNELHR program was developed to provide researchers and managers a tool to implement this extremely flexible set of methods with many variants. KERNELHR runs interactively or from the command line on any personal computer (PC) running DOS. KERNELHR provides output of fixed and adaptive kernel home-range estimates, as well as density values in a format suitable for in-depth statistical and spatial analyses. An additional package of programs creates contour files for plotting in geographic information systems (GIS) and estimates core areas of ranges.

Wildlife Society Bulletin↗
USGS2020

Managing for a changing climate: A bended interdisciplinary climate course

We developed a blended (or hybrid) interactive course— Managing for a Changing Climate —that provides a holistic view of climate change. The course results from communication with university students and natural and cultural resource managers as well as the need for educational efforts aimed at the public, legislators, and decision-makers. Content includes the components of the physical climate system, natural climate variability, anthropogenic drivers of climate change, climate models and projections, climate assessments, energy economics, environmental policy, vulnerabilities to climate hazards, impacts of climate change, and decision-making related to climate adaptation and mitigation efforts. To convey most of the content, the course-development team created over 50 short videos (3–10 min each) in partnership with experts from a variety of academic, government, and industry institutions. The blended course has been offered as an upper-division, undergraduate course in the Department of Geography and Environmental Sustainability and School of Meteorology (four times) and College of International Studies (in Italy, once) at the University of Oklahoma with over 100 total students. The course has also been presented online-only at no cost to the participants in four fall semesters with over 1,000 total registrations. Videos created for this course are freely available on the YouTube page of the South Central Climate Adaptation Science Center. This course and its associated materials comprise high-quality, formal climate training and education that can be adapted to other formal and informal education settings beyond the walls of the university.

Bulletin of the American Meteorological Society↗
USGS2016

Three ingredients for Improved global aftershock forecasts: Tectonic region, time-dependent catalog incompleteness, and inter-sequence variability

Following a large earthquake, seismic hazard can be orders of magnitude higher than the long‐term average as a result of aftershock triggering. Because of this heightened hazard, emergency managers and the public demand rapid, authoritative, and reliable aftershock forecasts. In the past, U.S. Geological Survey (USGS) aftershock forecasts following large global earthquakes have been released on an ad hoc basis with inconsistent methods, and in some cases aftershock parameters adapted from California. To remedy this, the USGS is currently developing an automated aftershock product based on the Reasenberg and Jones (1989) method that will generate more accurate forecasts. To better capture spatial variations in aftershock productivity and decay, we estimate regional aftershock parameters for sequences within the García et al. (2012) tectonic regions. We find that regional variations for mean aftershock productivity reach almost a factor of 10. We also develop a method to account for the time‐dependent magnitude of completeness following large events in the catalog. In addition to estimating average sequence parameters within regions, we develop an inverse method to estimate the intersequence parameter variability. This allows for a more complete quantification of the forecast uncertainties and Bayesian updating of the forecast as sequence‐specific information becomes available.

California↗
USGS1929

Geology of the De Queen and Caddo Gap quadrangles, Arkansas

The field study of the geology of the De Queen and Caddo Gap quadrangles extended over a period of many years, and although the scientific and economic results from the study are here set forth fully for the first time in a single report, a number of publications have been issued that have presented some of the more important results. The field work was begun in 1907 and continued intermittently until 1925. The work in 1907 was done under a cooperative agreement between the United States Geological Survey and the Arkansas Geological Survey and involved primarily an investigation of the slate deposits of west-central Arkansas but also the mapping of the rocks in the mountainous part of the Caddo Gap quadrangle. In that year A. H. Purdue, State geologist of Arkansas, had charge of the work and was assisted by R. D. Mesler and H. D. Miser. All the subsequent work in the Caddo Gap quadrangle, as well as all in the De Queen quadrangle, was done by the United States Geological Survey. The work since 1907 is briefly outlined below. In 1908 Mr. Purdue, assisted by Mr. Miser, completed the mapping of the rocks of the Caddo Gap quadrangle with the aid of valuable suggestions from C. W. Hayes, chief geologist, J. A. Taff, and E. O. Ulrich, who visited the field for several days. In 1910 Mr. Purdue, assisted by Mr. Miser, reviewed a part of the previous work in the Caddo Gap quadrangle and mapped the rocks in most of the mountainous portion of the De Queen quadrangle. In 1911 these geologists did additional work in both the De Queen and Caddo Gap quadrangles, and in 1912 Mr. Miser, assisted by Mr. Mesler, completed the mapping of the rocks in the De Queen quadrangle and then reviewed some of the earlier work in the Caddo Gap quadrangle. In 1913 Arthur Keith, and Messrs. Purdue and Miser spent several days in a field conference in the Caddo Gap quadrangle. During the conference the first identifiable fossils in the Blaylock sandstone, of Silurian age, were discovered. In 1914 Mr. Miser obtained a small collection of fossil plants from the Stanley shale near Gillham, Ark., also the first fossils from the Arkansas novaculite. In 1916 he made a special study of some of the mineral deposits of the quadrangles, including the deposits of diamonds, manganese ore, gravel, and asphalt, and in 1917 he revisited the diamond mines. An investigation of the volcanic ash and tuff in the "Bingen formation," of Upper Cretaceous age, in the Caddo Gap quadrangle and adjoining areas to the south and southwest was made in 1923 by Clarence S. Ross and Mr. Miser. Also in that year other fossil plants were collected from the Stanley shale at the earlier discovered locality near Gillham by Mr. Miser. (See pl. 9, A .) The aggregate time spent in collecting fossils at this locality was eight days, so scare are the fossils and so difficult are the conditions for collecting them. Besides the above work the authors made frequent reconnaissance studies of adjoining areas, and Mr. Miser was joined in 1923 by C. W. Honess for a field conference of a few days in the De Queen and Caddo Gap quadrangles. In 1925 Mr. Miser joined in the field Messrs. L. W. Stephenson and C. H. Dane for a few days in a study of the " Bingen " (Woodbine and Tokio) and other formations of Upper Cretaceous age in and near the Caddo Gap quadrangle. Mr. Dane was making at that time a special study of the deposits of Upper Cretaceous age in southwestern Arkansas under a cooperative agreement between the United States Geological Survey and the Arkansas Geological Survey. For some of the information on the Tokio formation the present writers are indebted to Mr. Dane.

Arkansas, Oklahoma↗
USGS2003

Geoenvironmental Investigations of the Humboldt River Basin, Northern Nevada

Northern Nevada is one of the world's foremost regions of gold production. The Humboldt River Basin (HRB) covers 43,500 km2 in northern Nevada (Crompton, 1995), and it is home to approximately 18 active gold and silver mines (Driesner and Coyner, 2001) among at least 55 significant metallic mineral deposits (Long and others, 1998). Many of the gold mines are along the Carlin trend in the east-central portion of the HRB, and together they have produced 50 million ounces of gold from 1962 (when the Carlin mine first opened) through April 2002 (Nevada Mining Association, 2002). Mining is not new to the region, however. Beginning in 1849, mining has taken place in numerous districts that cover 39 percent of the land area in the HRB (Tingley, 1998). In addition to gold and silver, As, Ba, Cu, Fe, Hg, Li, Mn, Mo, Pb, S, Sb, V, W, Zn, and industrial commodities such as barite, limestone, fluorite, sand and gravel, gypsum, gemstones, pumice, zeolites, and building stone, have been extracted from the HRB (McFaul and others, 2000). All papers within this series of investigations can be found as lettered chapters of USGS Bulletin 2210, Geoenvironmental Investigations of the Humboldt River Basin, Northern Nevada. Each chapter is available separately online. The data and software utilized in this product (Chapter F) permit the user to view and analyze the geographic relationships among chemistry of stream sediments and surface waters, geology, and various cartographic base information such as but not limited to cities, county boundaries, and land ownership. Data for this product were compiled and or produced as part of a mineral and environmental assessment of the Humboldt River basin conducted by the U.S. Geological Survey between 1995 - 2000.

Bulletin↗
USGS2007

Wetland Boundary Determination in the Great Dismal Swamp Using Weighted Averages

A weighted average method was used to analyze transition zone vegetation in the Great Dismal Swamp to determine if a more uniform determination of wetland boundaries can be made nationwide. The method was applied to vegetation data collected on four transects and three vertical layers across the wetland-to-upland transition zone of the swamp. Ecological index values based on water tolerance were either taken from the literature or derived from local species tolerances. Wetland index values were calculated for 25-m increments using species cover and rankings based on the ecological indices. Wetland index values were used to designate increments as either wetland, transitional, or upland, and to examine the usefulness of a provisional wetland-upland break-point. The weighted average method did not provide for an objective placement of an absolute wetland boundary, but did serve to focus attention on the transitional boundary zone where supplementary information is necessary to select a wetland-upland breakpoint.

Water Resources Bulletin↗
USGS2003

Signatures of the seismic source in EMD-based characterization of the 1994 Northridge, California, earthquake recordings

In this article we use empirical mode decomposition (EMD) to characterize the 1994 Northridge, California, earthquake records and investigate the signatures carried over from the source rupture process. Comparison of the current study results with existing source inverse solutions that use traditional data processing suggests that the EMD-based characterization contains information that sheds light on aspects of the earthquake rupture process. We first summarize the fundamentals of the EMD and illustrate its features through the analysis of a hypothetical and a real record. Typically, the Northridge strong-motion records are decomposed into eight or nine intrinsic mode functions (IMF's), each of which emphasizes a different oscillation mode with different amplitude and frequency content. The first IMF has the highest-frequency content; frequency content decreases with an increase in IMF component. With the aid of a finite-fault inversion method, we then examine aspects of the source of the 1994 Northridge earthquake that are reflected in the second to fifth IMF components. This study shows that the second IMF is predominantly wave motion generated near the hypocenter, with high-frequency content that might be related to a large stress drop associated with the initiation of the earthquake. As one progresses from the second to the fifth IMF component, there is a general migration of the source region away from the hypocenter with associated longer-period signals as the rupture propagates. This study suggests that the different IMF components carry information on the earthquake rupture process that is expressed in their different frequency bands.

California↗
USGS2005

Software Review: A program for testing capture-recapture data for closure

Capture-recapture methods are widely used to estimate population parameters of free-ranging animals. Closed-population capture-recapture models, which assume there are no additions to or losses from the population over the period of study (i.e., the closure assumption), are preferred for population estimation over the open-population models, which do not assume closure, because heterogeneity in detection probabilities can be accounted for and this improves estimates. In this paper we introduce CloseTest, a new Microsoft® Windows-based program that computes the Otis et al. (1978) and Stanley and Burnham (1999) closure tests for capture-recapture data sets. Information on CloseTest features and where to obtain the program are provided.

Wildlife Society Bulletin↗
USGS1927

The brown iron ores of west-middle Tennessee

A study of the brown iron ore deposits of west-middle Tennessee has been carried on recently under a cooperative agreement between the Tennessee State Geological Survey and the United States Geological Survey. A detailed report on the subject was submitted in the spring of 1925 to the State Survey for publication as a bulletin, and the writing of the present report was completed in March, 1926. The field work was done mainly between October 22 and November 2, 1921, and April 26 and July 18, 1923; but in October, 1924, a visit was made to the mine at Napier. The writer was assisted in the field in 1921 by. R. W. Smith, assistant geologist, and in 1923 by C. C. Anderson, topographer, both of the Tennessee Survey. Mr. Wilbur A. Nelson, State geologist at the time the work was in progress, visited several mines with the writer and on these occasions as well as many times during the preparation of the report rendered helpful suggestions and guidance. Mr. H. D. Miser, of the United States Geological Survey, State geologist from September 1, 1925, to July 1, 1926, who is especially familiar with the southern part of this area, also cooperated heartily in the preparation of this report; and Mr. H. W. Davis, of the United States Bureau of Mines, compiled the statistical data on iron ore and pig iron. To all these gentlemen the writer desires to express his appreciation. Acknowledgments are also due to the officials and employees of the iron mining and manufacturing companies and to people living in the vicinity of inactive mining properties for their courteous attention and for the large amount of information furnished. In the present paper the general features of the region and of the iron-ore deposits are delineated, but only a few typical ore deposits in each county are described, as the State bulletin will contain detailed descriptions of all properties.

Tennessee↗
USGS2014

Estimating ages of white-tailed deer: Age and sex patterns of error using tooth wear-and-replacement and consistency of cementum annuli

The age structure of harvested animals provides the basis for many demographic analyses. Ages of harvested white-tailed deer ( Odocoileus virginianus ) and other ungulates often are estimated by evaluating replacement and wear patterns of teeth, which is subjective and error-prone. Few previous studies however, examined age- and sex-specific error rates. Counting cementum annuli of incisors is an alternative, more accurate method of estimating age, but factors that influence consistency of cementum annuli counts are poorly known. We estimated age of 1,261 adult (≥1.5 yr old) white-tailed deer harvested in Wisconsin and Illinois (USA; 2005–2008) using both wear-and-replacement and cementum annuli. We compared cementum annuli with wear-and-replacement estimates to assess misclassification rates by sex and age. Wear-and-replacement for estimating ages of white-tailed deer resulted in substantial misclassification compared with cementum annuli. Age classes of females were consistently underestimated, while those of males were underestimated for younger age classes but overestimated for older age classes. Misclassification resulted in an impression of a younger age-structure than actually was the case. Additionally, we obtained paired age-estimates from cementum annuli for 295 deer. Consistency of paired cementum annuli age-estimates decreased with age, was lower in females than males, and decreased as age estimates became less certain. Our results indicated that errors in the wear-and-replacement techniques are substantial and could impact demographic analyses that use age-structure information.

Wildlife Society Bulletin↗
USGS2020

Monitoring chemical contaminants in the Gulf of Maine, using sediments and mussels (Mytilus edulis): An evaluation

The objective of this paper is to determine whether contaminant data on mussels and sediments can be used interchangeably, or not, when assessing the degree of anthropogenic contamination of a water body. To obtain adequate coverage of the entire Gulf of Maine, Bay of Fundy sediment samples were collected, analyzed and combined with similar data from four coastal monitoring programs. This required careful interpretation but provided robust results consistent with published literature. A strong correspondence was found between sediment and mussel concentrations for polycyclic aromatic hydrocarbons, moderate to weak correspondence for polychlorinated biphenyls, and except for mercury and zinc, little to no correspondence was found for metals. We conclude that mussel contaminant data are likely sufficient for providing information on the spatial and temporal distribution of chemical contaminants, in coastal waters, under a broad range of environmental conditions and contaminant levels, and unlike sediments, provide direct information on contaminant bioavailability.

Gulf of Maine↗
USGS1988

Descriptive and grade-tonnage models of volcanogenic manganese deposits in oceanic environments; a modification

Four types of volcanogenic manganese deposits, distinguished on the basis of geologic, geochemical, and geophysical characteristics, appear to result from a combination of volcanic and hydrothermal processes related to hot-spring activity in oceanic environments. We compare these four desposit types, here called the Franciscan, Cuban, Olympic Peninsula, and Cyprus, with respect to host rocks, associated rocks, minerals, deposit shape, dimensions, volume, tonnage, grade, and mineral-deposit density (number of deposits per unit area). Franciscan-type deposits occur in obducted oceanic ridge and backarc marginal-basin environments, are associated with chert, shale, and graywacke aroun the margins of mafic volcanic centers, and have a median tonnage of 450 t and median grades of 36 weight percent Mn and less than 5.1 weight percent Fe. Cuban-type deposits occur in island-arc environments, are associated with tuff and limestone around domal structures or intrusions inferred to be volcanic centers, and have a median tonnage of 6,400 t and median grades of 39 weight percent Mn and less than 4.4 weight percent Fe. Olympic Peninsula-type deposits occur in obducted oceanic midplate settings, are associated with argillaceous limestone, argillite, and graywacke around mafic volcanic centers (seamounts or islands), and have a median tonnage of 340 t and median grades of 35 weight percent Mn and less than 6.5 weight percent Fe. Cyprus-type deposits occur in the same tectonic environments as Franciscan type but are associated with basalt, marl, chalk, silt, and chert off the ridge-axis position and have a median tonnage of 41,000 t and median grades of 33 weight percent Fe and 8 weight percent Mn. All these deposits are thin ellipsoids, concordant to the host rocks, but Cyprus-and Cuban-type deposits are larger than Franciscan- and Olympic Peninsula-type deposits. Except for Cyprus-type deposits, which are manganiferous iron (umber) deposits composed of hydrated iron and manganese oxides, all volcanogenic manganese deposits contain manganese oxides, silicates, and carbonates. Mineral-deposit densities, along with grade and tonnage information, are useful for estimating the number, size, andgrades of these deposits in resource assessments.

Bulletin↗
USGS1919

Gravel deposits of the Caddo Gap and De Queen quadrangles, Arkansas

Several thick deposits of gravel are widely distributed along the north edge of the Gulf Coastal Plain, of which a narrow belt is embraced in the southern parts of the Caddo Gap and De Queen quadrangles, Ark. This belt is shown on Plate I, and its location is shown on figure 5, a key map of this region. It comprises parts of Pike, Howard, and Sevier counties and a narrow strip of Hemp- stead County, in southwestern Arkansas, and a strip along the east edge of McCurtain County, in southeastern Oklahoma. The gravels are of Lower Cretaceous, Upper Cretaceous, and Quaternary age, and are composed mainly of pebbles of novaculite (a variety of chert) derived from the Arkansas novaculite exposed in the Ouachita Mountain region, which is north of the Gulf Coastal Plain. They are used in making concrete, in ballasting railroads, and in the construction of wagon roads. Very small quantities of pebbles are also used in the washing plant of the Kimberlite Diamond Mining & Washing Co., at Murfreesboro, to assist in the disintegration of the altered peridotite which carries the diamonds. Interest in possible American sources of flint pebbles or substitutes therefor to be used in tube mills, in which minerals, ores, cement materials, and clinker are extensively ground in this country, has been aroused since the beginning of the present world war. This interest is due to the partial interruption of imports of flint pebbles from Denmark and France, which have supplied most of the pebbles used in this country. The main reasons for the preparation of this report are to present a description of the gravels under discussion and to indicate the possibility of their use in tube mills. The information for this report is the result of detailed field studies in the Caddo Gap and De Queen quadrangles by the authors in 1908 and 1911 and by the senior author in 1912 and 1916. Mr. E, D. Mesler rendered valuable assistance in 1912. Much of the information is abstracted from the De Queen-Caddo Gap folio, which is nearing completion.

Arkansas, Oklahoma↗