Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Special Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources

Hurricane impact and recovery shoreline change analysis of the Chandeleur Islands, Louisiana, USA: 1855 to 2005

Results from historical (1855-2005) shoreline change analysis of the Chandeleur Islands, Louisiana, demonstrate that tropical cyclone frequency dominates the long-term evolution of this barrier-island arc. The detailed results of this study were published in December 2009 as part of a special issue of Geo-Marine Letters that documents early results from the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility Project.

Fact Sheet↗

National Park Service Vegetation Mapping Inventory Program: Great Smoky Mountains National Park vegetation mapping project

The National Park Service (NPS) Vegetation Mapping Inventory (VMI) Program is an effort to classify, describe, and map existing vegetation communities in national park units throughout the United States. The NPS VMI Program is managed by the NPS Natural Resource Stewardship and Science Inventory and Monitoring Program and provides baseline vegetation information to natural resource managers, researchers, and ecologists. The U.S. Geological Survey Upper Midwest Environmental Sciences Center, NatureServe, and NPS Great Smoky Mountains National Park (GRSM, also referred to as the “Park”) have completed vegetation classification and mapping of GRSM, including the Foothills Parkway, for the NPS VMI Program. Mappers, ecologists, and botanists collaborated to affirm vegetation types of GRSM and to determine how best to map the vegetation types by using aerial imagery. A vegetation classification developed in 2003 by NatureServe and the NPS served as a foundation to further classify and map the vegetation types of the Park. Data from an additional 10 vegetation plots supported vegetation types either rare or not documented in the 2003 classification. Data from 203 verification sites were collected to test the field key to vegetation types and the application of vegetation types to a sample set of map polygons. Furthermore, data from 972 accuracy assessment (AA) sites were collected (of which 966 were used to test accuracy of the vegetation map layer). This GRSM vegetation mapping project identified 112 vegetation types consisting of 105 association types in the U.S. National Vegetation Classification (USNVC), 2 “park-special” types, 1 “map-special” type, and 4 cultural types in the USNVC. To map the vegetation and land cover of GRSM, 52 map classes were developed. Of these 52 map classes, 46 represent natural (including ruderal) vegetation types, most of which types are recognized in the USNVC. For the remaining 6 of the 52 map classes, 4 represent USNVC cultural types for agricultural and developed areas, and 2 represent non-USNVC types for nonvegetated open water and nonvegetated rock. Features were interpreted from viewing four-band digital aerial imagery using digital onscreen three-dimensional stereoscopic workflow systems in geographic information systems; digital aerial imagery was collected during September 23–October 30, 2015. The interpreted data were digitally and spatially referenced, thus making the spatial-database layers usable in a geographic information system. Polygon units were mapped to either a 0.5- or 0.25- hectare (ha) minimum mapping unit, depending on vegetation type. A geodatabase containing several feature-class layers and tables provides the locations and data of USNVC vegetation types (vegetation map layer), vegetation plots, verification sites, AA sites, project boundary extent, and aerial image centers and flight lines. Covering 210,875 ha, the feature-class layer and related tables for the vegetation map layer provide 34,084 polygons of detailed attribute data when special modifiers are not considered (average polygon size of 6.2 ha) and 36,589 polygons of detailed attribute data when special modifiers are considered (average polygon size of 5.8 ha). Each map polygon is assigned a map-class code and name and, when applicable, are linked to USNVC classification tables within the geodatabase. The vegetation map extent includes the administrative boundary for GRSM and the Foothills Parkway. A summary report, generated from the vegetation map layer, concludes that the 46 map classes representing natural (including ruderal) vegetation types apply to 99.2% of polygons (33,797 polygons; average size of 6.2 ha) and cover 98.6% of the Park (207,971.4 ha). Further broken down, map classes representing natural vegetation types indicate that the Park is 97.7% forest and woodland (205,882.5 ha), 0.6% shrubland (1,174.6 ha), and 0.4% herbaceous (914.3 ha). Map classes representing cultural vegetation types apply to 0.8% of polygons (259 polygons; average size of 4.9 ha) and cover 0.6% of the Park (1,277.4 ha). Map classes representing nonvegetation open and flowing water and unvegetated rock apply to 0.08% of polygons (28 polygons; average size of 58.1 ha) and cover 0.8% of the Park (1,625.9 ha). A thematic AA study was completed of map classes representing the natural (including ruderal) vegetation types of the Park. Initial AA results were discussed with NPS staff from the Park. Following input from NPS staff on how to handle map classes that fell below accuracy standards, adjustments were made to the vegetation map layer. Final results indicate an overall accuracy of 80.64% (kappa index of 79.96% for chance agreements) based on data from 966 of the 972 AA sites. Most individual map-class themes exceed the NPS VMI Program standard of 80% with a 90% confidence interval. The GRSM vegetation mapping project delivers many geospatial and vegetation data products, including an in-depth project report discussing methods and results, which includes map classification and map-class descriptions. This suite of products also includes descriptions and a field key to vegetation types; a database of vegetation plots, verification sites, and AA sites; digital images of field sites; field data sheets; digital aerial imagery; hardcopy and digital maps; a geodatabase of vegetation and land cover (map layer), field sites (vegetation plots, verification sites, and AA sites), aerial imagery index, project boundary, and metadata; and a contingency table listing AA results. Geospatial products are projected in the Universal Transverse Mercator, Zone 17 North, by using the North American Datum of 1983. Information on the NPS VMI Program and completed mapping projects are on the internet at https://www.nps.gov/im/vegetation-inventory.htm.

North Carolina, Tennessee↗

Avian Species Inventory at Manzanar National Historic Site, California - Final Report to the National Park Service

We conducted a baseline inventory for avian species at Manzanar National Historic Site, Inyo County, Calif., from 2002 to 2005. Under the guidelines of the Mojave Network Biological Inventory Program, the primary objectives for this study were to (1) inventory and document the occurrence of avian species at Manzanar, with the goal of documenting at least 90 percent of the species present; (2) provide a geographic information system (GIS)-referenced list of sensitive species occurring at Manzanar that are rare, on Federal or State lists, or otherwise worthy of special consideration; and (3) enter all species data into the National Park Service NPSpecies database. Survey methods included general area searches, variable circular plot point-count censusing, nocturnal surveys, and nest searching. During 13 year-round survey sessions, we documented the occurrence of 132 bird species at Manzanar and confirmed breeding by 19 of these. Based on our findings, as well as review of the literature and searches for records of species occurrence, we estimate inventory completeness for regularly occurring bird species at Manzanar to be near 90 percent. No sensitive species on Federal or State lists were found. The distribution and relative abundance of common bird species at this site is now well enough known to begin development of a monitoring protocol for this group.

Open-File Report↗

Geology of Glacier National Park and the Flathead Region, Northwestern Montana

This report summarizes available data on two adjacent and partly overlapping regions in northwestern Montana. The first of these is Glacier National Park plus small areas east and west of the park. The second is here called, for convenience, the Flathead region; it embraces the mountains from the southern tip of Glacier Park to latitude 48 deg north and between the Great Plains on the east and Flathead Valley on the west. The fieldwork under the direction of the writer was done in 1948, 1949, 1950, and 1951, with some work in 1952 and 1953. The two regions together include parts of the Swan, Flathead, Livingstone, and Lewis Ranges. They are drained largely by branches of the Flathead River. On the east and north, however, they are penetrated by tributaries of the Missouri River and in addition by streams that flow into Canada. Roads and highways reach the borders of the regions; but there are few roads in the regions and only two highways cross them. The principal economic value of the assemblage of mountains described in the present report is as a collecting ground for snow to furnish the water used in the surrounding lowlands and as a scenic and wildlife recreation area. A few metallic deposits and lignitic coal beds are known, but these have not proved to be important and cannot, as far as can now be judged, be expected to become so. No oil except minor seeps has yet been found, and most parts of the two regions covered do not appear geologically favorable to the presence of oil in commercial quantities. The high, Hungry Horse Dam on which construction was in progress during the fieldwork now floods part of the Flathead region and will greatly influence the future of that region. The rocks range in age from Precambrian to Recent. The thickest units belong to the Belt series of Precambrian age, and special attention was paid to them. As a result, it is clear that at least the upper part of the series shows marked lateral changes within short distances. This fact introduces complexities into stratigraphic correlation and should be remembered wherever the series is studied. The stromatolites, or fossil algae, in the Belt series, although still imperfectly understood, give clues with respect to problems of ecology and stratigraphy. The subdivisions of the Belt series within the areas covered by the present report are, in ascending order, Altyn limestone, Appekunny argillite, Grinnell argillite, Siyeh limestone, and Missoula group. Local subdivisions of the Missoula group are possible in certain areas, and all the units just named are expected to be subdivided when detailed studies are undertaken. In the Glacier National Park and Flathead regions together, it is probable that between 25,000 and 30,000 feet of beds belonging to the Belt series, possibly more, are present. These consist largely of quartzitic argillite, quartzite, and carbonate rocks, mostly dolomitic. Small gabbroic and diabasic intrusive bodies and, at one horizon, basaltic lava are associated with the Belt series. Above the Belt series is a thick sequence of Cambrian, Devonian, and Carboniferous strata, in which limestone is dominant, followed by strata of Jurassic and Cretaceous age, largely limestone and shale and partly of terrestrial origin. Slightly consolidated gravel, sand, and silt of Tertiary age are preserved in some valleys and as erosional remnants on the plains close to the mountain border. Pleistocene and Recent glacial and fluviatile deposits are plentiful in mountain valleys and on the plains east of the mountains. Sufficient crustal movements took place during the latter part of Belt time to produce tension cracks that permitted some intrusion and related extrusion to occur. Broad crustal warping probably took place at intervals during the Paleozoic era, but these successive movements left little record other than the absence of sedimentary rock units that might otherwise have been deposited. The same can be said of much of the Me

Professional Paper↗

EAARL Topography-Vicksburg National Military Park 2007: First Surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first-surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Vicksburg National Military Park in Mississippi, acquired on September 12, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗

EAARL topography: Jean Lafitte National Historical Park and Preserve 2006

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) and bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Jean Lafitte National Historical Park and Preserve in Louisiana, acquired on September 22, 2006. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Louisiana↗

EAARL topography - Vicksburg National Military Park 2008: Bare earth

These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Vicksburg National Military Park in Mississippi, acquired on March 6, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Mississippi↗

EAARL topography - Natchez Trace Parkway 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Natchez Trace Parkway in Mississippi, acquired on September 14, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗

EAARL topography - George Washington Birthplace National Monument 2008

These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) and first surface (FS) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the George Washington Birthplace National Monument in Virginia, acquired on March 26, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL) was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Virginia↗

Native fish sanctuaries of the lower Colorado River: Cibola High Levee Pond, Desert Pupfish Pond

Historically, the Colorado River was one of the most formidable rivers in the world. Each spring, melting snow from the mountains scoured the desert landscape moving millions of tons of sediment to the sea. The Grand Canyon lays testament to its erosive nature. Summer heat would bring seasonal droughts, reducing the river to a trickle impacting humans, animals, and fish. Isolated by high mountains and harsh deserts, its fish community developed unique and specialized traits that helped them survive raging floods and prolonged droughts. Conditions were so unique that three quarters of the fish species are found nowhere else in the world?|

Colorado River↗

Preliminary report on the potential waterpower of Grant, Ptarmigan, Cooper and Crescent lakes on the Kenai Peninsula, near Seward, Alaska

Grant, Ptarmigan, Cooper, and Crescent Lakes, located in the Kenai Mountains in the upper portion of the Kenai River Basin, approximately 25 miles to the north of Seward, present favorable opportunities for the development of waterpower. Grant and Ptarmigan Lakes can be made readily accessible by roads from the Seward-Anchorage Highway which in this area practically parallels the Alaska Railroad; and Cooper and Crescent Lakes by access roads from the Sterling Highway. Geologic conditions are favorable for the construction of the various elements of a power development although some special problems may be encountered. The power sites are located in areas of severe winter temperatures, -30° to -40° or less in most winters. This climatic feature must be given due consideration in the design of the various structures required for a power development. Streamflow records are available for a 7-year period for Grant and Ptarmigan Creeks and for a 5-year period for Cooper and Crescent Creeks. Only short and incomplete records of precipitation are available in the area of the power sites but records have been kept at Seward for 30 years. The precipitation at Seward during the periods for which streamflow records are available was, in general, less than average. It seems reasonable that similar conditions would prevail over the upper Kenai Basin. Consequently, the available stream-flow records cover a period of less than average precipitation and estimates of potential power based on these figures probably are on the conservative side. Only regulated flow is considered in this report. Each of the four lakes is a favorable storage site. Adequate capacity for complete regulation of the flow on a year-to-year basis or over a period of several years can be obtained by the construction of dams ranging in height from 20 to 50 feet. Water from the reservoirs can be conveyed to the powerhouses through conduits, tunnels, or pipelines of reasonable length. The total estimated potential power for the four lakes is 11,000 kilowatts for 90 percent of the time and 14,000 kilowatts for 50 percent of the time. Transmission line distances to Seward range from 22 miles for the Ptarmigan Lake power site to as much as 50 miles for the Cooper Lake power site that would be located on the Kenai River. The transmission line distance to Anchorage will approximate 100 miles, depending on the route selected.

Alaska↗

Fort Collins Science Center: Species and Habitats of Federal Interest

Ecosystem changes directly affect a wide variety of plant and animal species, floral and faunal communities, and groups of species such as amphibians and grassland birds. Appropriate management of public lands plays a crucial role in the conservation and recovery of endangered species and can be a key element in preventing a species from being listed under the Endangered Species Act. The Species and Habitats of Federal Interest Branch of the Fort Collins Science Center (FORT) conducts research on the ecology, habitat requirements, distribution and abundance, population dynamics, and genetics and systematics of many species facing threatened or endangered status or of special concern to resource management agencies. FORT scientists develop reintroduction and restoration techniques, technologies for monitoring populations, and novel methods to analyze data on population trends and habitat requirements. FORT expertise encompasses both traditional and specialized natural resource disciplines within wildlife biology, including population dynamics, animal behavior, plant and community ecology, inventory and monitoring, statistics and computer applications, conservation genetics, stable isotope analysis, and curatorial expertise.

Fact Sheet↗

Water-level data for the Albuquerque Basin and adjacent areas, central New Mexico, period of record through September 30, 2020

The Albuquerque Basin, located in central New Mexico, is about 100 miles long and 25–40 miles wide. The basin is hydrologically defined as the extent of consolidated and unconsolidated deposits of Tertiary and Quaternary age that encompasses the structural Rio Grande Rift between San Acacia to the south and Cochiti Lake to the north. A 20-percent population increase in the basin from 1990 to 2000 and a 22-percent population increase from 2000 to 2010 resulted in an increased demand for water in areas within the basin. Drinking-water supplies throughout the basin were obtained solely from groundwater resources until December 2008, when the Albuquerque Bernalillo County Water Utility Authority (ABCWUA) began treatment and distribution of surface water from the Rio Grande through the San Juan-Chama Drinking Water Project. An initial network of wells was established by the U.S. Geological Survey (USGS) in cooperation with the City of Albuquerque from April 1982 through September 1983 to monitor changes in groundwater levels throughout the Albuquerque Basin. In 1983, this network consisted of 6 wells with analog-to-digital recorders and 27 wells where water levels were measured monthly. As of 2020, the network consisted of 120 wells and piezometers. A piezometer is a specialized well open to a specific depth in the aquifer, often of small diameter and nested with other piezometers screened at different depths. The USGS, in cooperation with the ABCWUA, the New Mexico Office of the State Engineer, and Bernalillo County, measures water levels from the wells and piezometers in the network; this report, prepared in cooperation with the ABCWUA, presents water-level data collected by USGS personnel at the sites through water year 2020 (October 1, 2019, through September 30, 2020). Water levels that were collected from discontinued wells in previous water years were published in previous USGS reports.

New Mexico↗

Capture myopathy in an endangered sandhill crane (Grus canadensis pulla)

Despite precautions to protect cranes, a 3-year-old endangered Mississippi sandhill crane ( Grus canadensis pulla ) was found caught in a leghold trap in Gautier, Mississippi, on 11 November 1987. The bird could have been in the trap for up to 16 hr and was standing and struggling to escape when it was discovered. Serum chemistries of the crane on 12 November revealed elevated lactic dehydrogenase (2,880 IU/L), alanine aminotransferase (ALT) (152 IU/L), and aspartate aminotransferase (AST) (>1,000 IU/L) values. Following surgical amputation of a fractured toe, the bird never attempted to stand and was unable to stand even when manually supported. Radiographic and physical examination of both legs did not reveal any anatomical abnormalities. Despite medical care, including supportive therapy, no improvement was observed in the bird's ability to stand and to support itself, and the bird died on 19 November. Serum chemistries and the postmortem and histopathologic findings were compatible with capture myopathy described in other species. Because of the possible susceptibility of long-legged birds such as the Mississippi sandhill crane to capture myopathy, special care must be taken when trapping, handling, chemically immobilizing, and transporting these species. In addition, precautions must be taken when conducting a predator-control program to ensure that nontarget wildlife are unlikely to encounter traps. Capture myopathy has only rarely been observed in wild birds, and this case represents the first report in a Mississippi sandhill crane.

Mississippi↗

Geology and mining industry of the Tintic district, Utah: Section in Nineteenth Annual Report of the United States Geological Survey to the Secretary of the Interior 1897 - 1898: Part III - Economic Geology

The field work upon which this report is based was begun in July, 1897, and continued without interruption until December of the same year. The area studied is approximately 15 miles square and contains 234 square miles. The topographic maps, which are two in number, were prepared under the direction of Mr. R. U. Goode, Mr. S. S. Gannett doing the triangulation and Messrs. Marshall and Griswold the topography in the fall of 1896 and summer of 1897. The mapping is done on two scales; the larger area, approximately 15 miles square, is mapped on a scale of 1: 62,500. This map is designed to form a part of the Geologic Atlas of the United States. The other map represents the portion of the larger area in which the majority of the mines are located. It is on a scale of 1: 9,600, and covers an area of 12 square miles. The work has been greatly facilitated through the assistance rendered by the mining men of the district, among whom special thanks are due to Messrs. G. H. Robinson, W. J. Craig, W. M. Nesbit, and C. H. Blanchard. The chemical work on the ores and country rocks from the district has been done in the laboratory of the Survey by Messrs. H. N. Stokes and George Steiger, and the determination of the fossils collected is to be credited to Mr. G. H. Girty, also of the Geological Survey. In the field work the authors have cooperated constantly on every phase of the varied problems. The same is true for the office work, except that the stratigraphic and economic problems have been the especial studies of Mr. Tower, while the petrologic and remaining problems have been the special studies of Mr. Smith. In pursuance of this system of work the introduction has been written conjointly, Chapter II of Part I and all of Part II have been written by Mr. Tower, and Chapters I and III to VII of Part I by Mr. Smith.

Utah↗

Water and the South Florida environment

Ecological problems are a major concern to Florida as well as to the Nation. National attention was focused on these problems in September 1968, when the Port Authority of Dade County began to con- struct a jetport for supersonic aircraft on a 39-square-mile tract 6 miles north of Everglades National Park and on the east edge of the Big Cypress Swamp. Conservation groups and citizens raised questions as to the effects of a regional jetport and the attendant satellite growth on the water resources and biological communities of the National Park. The Department of the Interior began studies to investigate the situation. One study, Leopold (1969), reported on the unfavorable ecological effects of the attendant satellite growth. Then Secretary of the Interior, Walter J. Hickel, directed the U.S. Geological Survey to study the water resources of the Big Cypress to determine which parts of the Big Cypress contribute the major part of the water necessary to maintain adequate water supplies for Everglades National Park. This was done in a report by Klein and others (1970). At about the same time, the Departments of interior and Transportation, the State of Florida, and the Dade County Port Authority con-curred in assigning to the Secretary of the Interior certain responsibilities for planning, developing, and coordinating an ecological study of south Florida. A primary objective of the ecological study is to provide information that will assist in the formulation of land-use policy consistent with the protection of the environment of Everglades National Park, the adjacent estuaries, and the public water supplies. The part of the investigation describing the surface-water and ground-water resources of south Florida was assigned to the Geological Survey. The quantity and quality of surface water and ground water and their interrelation with estuarine and marine waters are here considered. Also considered are the problems, present or future, related to the hydrologic environment that involve human, animal, and plant life. Changes taking place, apparent trends, and projections for the future are also considered, as well as alternatives for water management. The Geological Survey effort began in January 1971, when aerial photography and selected qualitative hydrologic data were obtained. However, most of the information upon which this report Is based was obtained by the Geological Survey in cooperative programs with several local, State, and Federal agencies since about 1940. The long-term support of the U.S. Army Corps of Engineers, the National Park Service, U.S. Navy, Florida Department of Natural Resources, Central and Southern Florida Flood Control District, Dade, Broward, Palm Beach and Collier Counties, Miami and Miami Beach, Ft. Lauderdale, Naples and others in the collection of data is gratefully acknowledged. A prolonged drought throughout south Florida from September 1970 to May 1971 accentuated the importance and timeliness of the study. The drought brought about a readvance of sea-water intrusion in many coastal areas, which necessitated restrictions on water use. The effect of drought on the regional water supply, continued population growth and increased water demands, and deterioration of the water quality in many of the canals and waterways of the urban areas accentuated the need for improved water management and land-use planning. As a result of the water crisis, the Governor of Florida called a special conference in September 1971. The conference, attended by foremost scientific and government personnel, proposed creation of an agency that would develop and implement comprehensive land and water-use plans for south Florida that would minimize environmental degradation.

Florida↗

A history of the Water Resources Division, U.S. Geological Survey; Volume VI, May 1, 1957 to June 30, 1966; the years of change

Luna B. Leopold became chief of the Water Resources Division in May 1957 and stepped down in January 1966 to resume his research'in geomorphology. Ernest L. Hendricks succeeded'Leopold as chief of the Division in May 1966. The dates May 1, 1957, and June 30,1966, bracket a period of profound change in the organization and programs and in the philosophy of operations of the Water Resource Division and indeed in the entire field of investigational hydrology both within and outside the Geological Survey. Leopold brought into his new position a conviction that water on and beneath the Earth's surface and the quality of both were interdependent parts of one water-resources system and that the organization and operation of WRD must change to reflect that oneness. He was also convinced that the research program of the Division was inadequate in scope, staff, and funding to meet the operational needs of the Division and the needs of the community of water-resources planners, developers, and administrators in the near and distant future. Leopold's vision of a Water Resources Division properly staffed to meet current and future technical challenges included the imposition of rigorous selection standards on new professional recruits and the development of specialized training in-house and at university undergraduate and graduate levels. The period of Leopold's administrative and technical leadership of the WRD was indeed the "Years of Change."

Report↗