SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources

USGS2006

Tracing the continuity of pleistocene aquifers in northern New Jersey by seismic methods

Seismic refraction measurements were used to draw a new bedrock contour map in Morris County, New Jersey , where the major ground‐water supplies are found in Quaternary sand and gravel deposits filling pre‐ Pleistocene channels. Aquifer performance tests aided in tracing the continuity of the Quaternary aquifers in these channels. In one case, the lack of continuity between two wells substantiated the seismic prediction that two separate channels were involved. The success of the seismic exploration emphasizes the value of using such methods , so that test drilling can be devoted to exploring the more favorable areas for production wells.

New Jersey↗

USGS1978

Episodes of Aleutian Ridge explosive volcanism

Earlier workers have overlooked deep-sea bentonite beds when unraveling the Cenozoic volcanic history of an area. In the North Pacific, identification of Miocene and older volcanic episodes is possible only if both altered (bentonite) and unaltered ash beds are recognized. Our study, which includes bentonite beds, shows that volcanism on the Aleutian Ridge and Kamchatka Peninsula has been cyclic. Volcanic activity seems to have increased every 2.5 × 10 6 years for the past 10 × 10 6 years and every 5.0 × 10 6 years for the time span from 10 to 20 × 10 6 years ago. The middle and late Miocene and the Quaternary were times of greatly increased volcanic activity in the North Pacific and elsewhere around the Pacific Basin. The apparent absence of a volcanic record before the late Miocene at Deep Sea Drilling Project site 192 is the result not of plate motion, as suggested by Stewart and by Ninkovich and Donn, but rather of the diagenesis of ash layers. Major, apparently global volcanic episodes occurred at least twice in the last 20 × 10 6 years. Yet, only one major glacial epoch (the Pleistocene) has occurred. Therefore, even though glaciation coincided with an increase in Quaternary volcanism, the increased volcanism itself may not have been the primary cause of global cooling.

Alaska↗

USGS1985

Geologic evidence for recurrent moderate to large earthquakes near Charleston, South Carolina

Multiple generations of earthquake-induced sand blows in Quaternary sediments and soils near Charleston, South Carolina, are evidence of recurrent moderate to large earthquakes in that area. The large 1886 earthquake, the only historic earthquake known to have produced sand blows at Charleston, probably caused the youngest observed blows. Older (late Quaternary) sand blows in the Charleston area indicate at least two prehistoric earthquakes with shaking severities comparable to the 1886 event.

South Carolina↗

USGS1999

Late Cenozoic stratigraphy and tephrochronology of the western Black Mountains piedmont, Death Valley, California: Implications for the tectonic development of Death Valley

Geologic mapping combined with the tephrochronology of spatially isolated sedimentary sections along the western Black Mountains piedmont adjacent the Death Valley fault zone (DVFZ) improves the late Cenozoic stratigraphy from relative age to correlated age. Pliocene tephra layers identified in Funeral Formation conglomerates at Artist Drive and Copper Canyon include a “Nomlaki-like” tephra bed (ca. 3.4 Ma), the tuffs of Mesquite Spring (3.1–3.3 Ma), and a tuff of the lower Glass Mountain family (1.86–1.92 Ma). We informally name the early(?) to middle Pleistocene Mormon Point formation1, which contains tephra layers correlated with the upper Glass Mountain/Bishop family of tephra layers (0.76–1.2 Ma), the Lava Creek B ash bed (ca. 0.66 Ma), and the Dibekulewe ash bed (ca. 0.51 Ma). Identification of these tephra layers indicates that the maximum age of the overlying and inset lacustrine gravel and alluvial fan deposits is 0.51 Ma. The correlated age stratigraphy indicates that the dextral-oblique DVFZ has stepped basinward at Mormon Point and Copper Canyon since the late Pliocene. In contrast, during that same time the DVFZ at Artist Drive has not stepped basinward, but developed into a graben. The age of faulting on the low-angle (~19°–40°) Mormon Point turtleback fault is bracketed between 0.76 and 0.18 Ma, and the overlying Mormon Point formation shows no evidence of tilting, indicating slip on the turtleback fault was at a low-angle. Early Quaternary slip on the low-angle turtleback fault conflicts with the present versions of the pure shear, rolling-hinge, and detachment/rift models for Death Valley extension. Early Quaternary slip is most compatible with turtleback faults as folded or warped detachment fault. We propose that the warping is thermally driven and related to the Black Mountains igneous complex.

California, Nevada↗

USGS1949

Terrain diagrams of the Philippine Islands

This paper presents four terrain diagrams, on a scale of 1:1,000,000, which cover all the Philippine Islands. The diagrams were prepared during World War II by the Military Geology Unit of the U. S. Geological Survey for the Chief of Engineers, U. S. Army. Terrain features shown on the diagrams owe their individuality to the nature of the rock formations and the tectonics. Mountain areas are made up of pre-Tertiary basement rocks, and of Tertiary and Quaternary volcanics; Tertiary and Quaternary sediments from the lowland areas. The mountain areas of basement rocks are geanticlines or horsts, and the lowland areas of Tertiary sedimentary rocks are downwarps. A striking tectonic feature, which has strongly influenced the terrain, is the Philippine fault zone, a belt of dislocation which extends southeast from Luzon to Mindanao.

Palawan↗

USGS1993

Relict colluvial boulder deposits as paleoclimatic indicators in the Yucca Mountain region, southern Nevada

Early to middle Pleistocene boulder deposits are common features on southern Nevada hillslopes. These darkly varnished, ancient colluvial deposits stand but in stark contrast to the underlying light-colored bedrock of volcanic tuffs, and they serve as minor divides between drainage channels on modern hillslopes. To demonstrate the antiquity of these stable hillslope features, six colluvial boulder deposits from Yucca Mountain, Nye County, Nevada, were dated by cation- ratio dating of rock varnish accreted on boulder surfaces. Estimated minimum ages of these boulder deposits range from 760 to 170 ka. Five additional older deposits on nearby Skull and Little Skull Mountains and Buckboard Mesa yielded cation-ratio minimum-age estimates of 1.38 Ma to 800 ka. An independent cosmogenic chlorine-36 surface exposure date was obtained on one deposit, which confirms an estimated early to middle Quaternary age. These deposits have provided the oldest age estimates for unconsolidated hillslope deposits in the southwestern United States. We suggest that the colluvial boulder deposits were produced during early and middle Pleistocene glacial/pluvial episodes and were stabilized during the transition to drier interglacial climates. By comparison to modern periglacial environments, winter minimum monthly temperatures of -3 to -5 °C were necessary to initiate freeze-thaw conditions of such vigor to physically weather relatively large volumes of large boulders from the upper hillslopes of the Yucca Mountain area. These conditions imply that early and middle Pleistocene glacial winter temperatures were at least 1 to 3 °C colder than existed during the last Pleistocene glacial episode and 7 to 9 °C colder than present. We conclude that at least several early and middle Pleistocene glacial episodes were colder, and perhaps wetter, than glacial episodes of the late Pleistocene in the southern Great Basin. Geomorphic processes necessary to form these colluvial boulder deposits are not active on modern hillslopes in the southern Great Basin. In addition, the lack of young, relatively unvarnished colluvial boulder deposits on these hillslopes suggests that boulder-forming conditions did not exist during the late Pleistocene in this region. Modern semiarid hillslope processes primarily erode colluvium during infrequent high-intensity storms. The preservation of old, thin hillslope deposits and the less-than-2-m incision by hillslope runoff adjacent to these deposits, however, indicate that extremely low denudation rates have occurred on resistant volcanic hillslopes in the southern Great Basin during Quaternary time.

Nevada↗

USGS1999

Active tectonics of the Seattle fault and central Puget sound, Washington - Implications for earthquake hazards

We use an extensive network of marine high-resolution and conventional industry seismic-reflection data to constrain the location, shallow structure, and displacement rates of the Seattle fault zone and crosscutting high-angle faults in the Puget Lowland of western Washington. Analysis of seismic profiles extending 50 km across the Puget Lowland from Lake Washington to Hood Canal indicates that the west-trending Seattle fault comprises a broad (4–6 km) zone of three or more south-dipping reverse faults. Quaternary sediment has been folded and faulted along all faults in the zone but is clearly most pronounced along fault A, the northernmost fault, which forms the boundary between the Seattle uplift and Seattle basin. Analysis of growth strata deposited across fault A indicate minimum Quaternary slip rates of about 0.6 mm/yr. Slip rates across the entire zone are estimated to be 0.7–1.1 mm/yr.

Washington↗

USGS2009

Geology and geomorphology of Bear Lake Valley and upper Bear River, Utah and Idaho

Bear Lake, on the Idaho-Utah border, lies in a fault-bounded valley through which the Bear River flows en route to the Great Salt Lake. Surficial deposits in the Bear Lake drainage basin provide a geologic context for interpretation of cores from Bear Lake deposits. In addition to groundwater discharge, Bear Lake received water and sediment from its own small drainage basin and sometimes from the Bear River and its glaciated headwaters. The lake basin interacts with the river in complex ways that are modulated by climatically induced lake-level changes, by the distribution of active Quaternary faults, and by the migration of the river across its fluvial fan north of the present lake. The upper Bear River flows northward for ???150 km from its headwaters in the northwestern Uinta Mountains, generally following the strike of regional Laramide and late Cenozoic structures. These structures likely also control the flow paths of groundwater that feeds Bear Lake, and groundwater-fed streams are the largest source of water when the lake is isolated from the Bear River. The present configuration of the Bear River with respect to Bear Lake Valley may not have been established until the late Pliocene. The absence of Uinta Range-derived quartzites in fluvial gravel on the crest of the Bear Lake Plateau east of Bear Lake suggests that the present headwaters were not part of the drainage basin in the late Tertiary. Newly mapped glacial deposits in the Bear River Range west of Bear Lake indicate several advances of valley glaciers that were probably coeval with glaciations in the Uinta Mountains. Much of the meltwater from these glaciers may have reached Bear Lake via groundwater pathways through infiltration in the karst terrain of the Bear River Range. At times during the Pleistocene, the Bear River flowed into Bear Lake and water level rose to the valley threshold at Nounan narrows. This threshold has been modified by aggradation, downcutting, and tectonics. Maximum lake levels have decreased from as high as 1830 m to 1806 m above sea level since the early Pleistocene due to episodic downcutting by the Bear River. The oldest exposed lacustrine sediments in Bear Lake Valley are probably of Pliocene age. Several high-lake phases during the early and middle Pleistocene were separated by episodes of fluvial incision. Threshold incision was not constant, however, because lake highstands of as much as 8 m above bedrock threshold level resulted from aggradation and possibly landsliding at least twice during the late-middle and late Pleistocene. Abandoned stream channels within the low-lying, fault-bounded region between Bear Lake and the modern Bear River show that Bear River progressively shifted northward during the Holocene. Several factors including faulting, location of the fluvial fan, and channel migration across the fluvial fan probably interacted to produce these changes in channel position. Late Quaternary slip rates on the east Bear Lake fault zone are estimated by using the water-level history of Bear Lake, assuming little or no displacement on dated deposits on the west side of the valley. Uplifted lacustrine deposits representing Pliocene to middle Pleistocene highstands of Bear Lake on the footwall block of the east Bear Lake fault zone provide dramatic evidence of long-term slip. Slip rates during the late Pleistocene increased from north to south along the east Bear Lake fault zone, consistent with the tectonic geomorphology. In addition, slip rates on the southern section of the fault zone have apparently decreased over the past 50 k.y. Copyright ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗

USGS2010

Implications of geophysical analysis on basin geometry and fault offsets in the northern Colorado River extensional corridor and adjoining Lake Mead region, Nevada and Arizona

The northern Colorado River extensional corridor and Lake Mead region are characterized by prominent gravity and magnetic anomalies that provide insight into the geometry of extensional basins, amount of vertical and strike-slip offset on faults that bound these basins, and composition of major basement blocks. Although large-magnitude extension throughout the extensional corridor and major strike-slip faulting north of Lake Mead have highly disrupted many basins, most of the older basins (middle to late Miocene) are not associated with prominent geophysical anomalies. Instead, the most conspicuous anomalies (e.g., gravity lows) generally correspond to the younger (late Miocene to recent), structurally more coherent basins. Most of the geophysically expressed basins lie north of Lake Mead and are bounded by Quaternary normal and/or strike-slip fault zones. Both Quaternary faults and geophysically conspicuous basins are largely absent south of Lake Mead, where the only prominent gravity low corresponds to a structurally intact basin filled primarily with halite along the less extended, eastern margin of the corridor. Relatively continuous northeast-trending magnetic anomalies south of Lake Mead, presumably caused by Proterozoic basement rocks, suggest that strike-slip displacement is negligible on many of the major normal faults. In contrast, magnetic anomalies are smeared along the Lake Mead fault system and Las Vegas Valley shear zone. Offset anomalies suggest left-lateral displacement of 12–20 km for the Hamblin Bay fault zone, 12–15 km for the Lime Ridge fault, and 12 km on the Gold Butte fault. These values are compatible with or lower than published estimates based on geologic mapping.

Arizona, Nevada↗

USGS2014

Neotectonics and geomorphic evolution of the northwestern arm of the Yellowstone Tectonic Parabola: Controls on intra-cratonic extensional regimes, southwest Montana

The catastrophic Hebgen Lake earthquake of 18 August 1959 (MW 7.3) led many geoscientists to develop new methods to better understand active tectonics in extensional tectonic regimes that address seismic hazards. The Madison Range fault system and adjacent Hebgen Lake–Red Canyon fault system provide an intermountain active tectonic analog for regional analyses of extensional crustal deformation. The Madison Range fault system comprises fault zones (~100 km in length) that have multiple salients and embayments marked by preexisting structures exposed in the footwall. Quaternary tectonic activity rates differ along the length of the fault system, with less displacement to the north. Within the Hebgen Lake basin, the 1959 earthquake is the latest slip event in the Hebgen Lake–Red Canyon fault system and southern Madison Range fault system. Geomorphic and paleoseismic investigations indicate previous faulting events on both fault systems. Surficial geologic mapping and historic seismicity support a coseismic structural linkage between the Madison Range and Hebgen Lake–Red Canyon fault systems. On this trip, we will look at Quaternary surface ruptures that characterize prehistoric earthquake magnitudes. The one-day field trip begins and ends in Bozeman, and includes an overview of the active tectonics within the Madison Valley and Hebgen Lake basin, southwestern Montana. We will also review geologic evidence, which includes new geologic maps and geomorphic analyses that demonstrate preexisting structural controls on surface rupture patterns along the Madison Range and Hebgen Lake–Red Canyon fault systems.

Book chapter↗

USGS2024

Geology, coastal geomorphology, and soils of eastern Santa Cruz Island (Limuw), Channel Islands National Park, California, USA

This one-day field trip explores northeastern Santa Cruz Island ( Limuw , in native Chumash), a part of Channel Islands National Park, USA. The geomorphology of eastern Santa Cruz Island has been controlled largely by active tectonics and sea-level fluctuations. The bedrock is Miocene volcanic rock overlain by Miocene shale and siltstone. The island has experienced Quaternary uplift, perhaps due to movement along an offshore thrust fault. Smaller faults are exposed in sea cliffs and have displaced Miocene rocks. Superimposed upon island uplift, there have been Quaternary sea-level fluctuations from interglacial-glacial climate changes. Interglacial high-sea stands are recorded as marine terraces. The last major interglacial period, ~120,000 years ago, left only small remnants of marine terraces. Most evidence of this high-sea stand was eroded away in the Holocene. However, a prominent marine terrace is preserved at 75–120 m above sea level. Some fossil mollusks from the deposits of this terrace, probably reworked, have given ages as old as Pliocene, but most yield ages of 2.6–2.0 Ma. The age and elevation of this terrace indicate a very low rate of tectonic uplift, similar to nearby Anacapa Island. A low uplift rate explains the absence or scarcity of younger terraces, including that of the last interglacial period. Low stands of sea (glacial periods) exposed the insular shelf, rich in carbonate skeletal sand. During glacial periods, these sands were entrained by the wind, deposited as dunes on marine terraces, and cemented into eolianite. Clay-rich Vertisols with silt mantles have developed on eolianites and terraces of the island, partly from in situ weathering, but also from inputs of Mojave Desert dust during Santa Ana wind events. This guide includes stops at Scorpion Anchorage, Cavern Point, and Potato Harbor. It provides insights into the bedrock, coastal geomorphology, fossiliferous marine terraces, eolianite, Vertisols, and the three formations on eastern Santa Cruz Island: the Santa Cruz Island Volcanics, the Monterey Formation, and the Potato Harbor Formation.

California↗

USGS2004

Structural geology of the proposed site area for a high-level radioactive waste repository, Yucca Mountain, Nevada

Geologic mapping and fracture studies have documented the fundamental patterns of joints and faults in the thick sequence of rhyolite tuffs at Yucca Mountain, Nevada, the proposed site of an underground repository for high-level radioactive waste. The largest structures are north-striking, block-bounding normal faults (with a subordinate left-lateral component) that divide the mountain into numerous 1-4-km-wide panels of gently east-dipping strata. Block-bounding faults, which underwent Quaternary movement as well as earlier Neogene movement, are linked by dominantly northwest-striking relay faults, especially in the more extended southern part of Yucca Mountain. Intrablock faults are commonly short and discontinuous, except those on the more intensely deformed margins of the blocks. Lithologic properties of the local tuff stratigraphy strongly control the mesoscale fracture network, and locally the fracture network has a strong influence on the nature of intrablock faulting. The least faulted part of Yucca Mountain is the north-central part, the site of the proposed repository. Although bounded by complex normal-fault systems, the 4-km-wide central block contains only sparse intrablock faults. Locally intense jointing appears to be strata-bound. The complexity of deformation and the magnitude of extension increase in all directions away from the proposed repository volume, especially in the southern part of the mountain where the intensity of deformation and the amount of vertical-axis rotation increase markedly. Block-bounding faults were active at Yucca Mountain during and after eruption of the 12.8-12.7 Ma Paintbrush Group, and significant motion on these faults postdated the 11.6 Ma Rainier Mesa Tuff. Diminished fault activity continued into Quaternary time. Roughly half of the stratal tilting in the site area occurred after 11.6 Ma, probably synchronous with the main pulse of vertical-axis rotation, which occurred between 11.6 and 11.45 Ma. Studies of sequential formation of tectonic joints, in the context of regional paleostress studies, indicate that north- and northwest-striking joint sets formed coevally with the main faulting episode during regional east-northeast-west-southwest extension and that a prominent northeast-striking joint set formed later, probably after 9 Ma. These structural analyses contribute to the understanding of several important issues at Yucca Mountain, including potential hydrologic pathways, seismic hazards, and fault-displacement hazards. ?? 2004 Geological Society of America.

Geological Society of America Bulletin↗

USGS2024

Fault activity in the San Gabriel Mountains, southern California, USA: Insights from landscape morphometrics, erosion rates, and fault-slip rates

Many studies use landscape form to determine spatial patterns of tectonic deformation, and these are particularly effective when paired with independent measures of rock uplift and erosion. Here, we use morphometric analyses and 10 Be catchment-averaged erosion rates, together with reverse slip rates from the Sierra Madre−Cucamonga fault zone, to reveal patterns in uplift, erosion, and fault activity in the range front of the San Gabriel Mountains in southern California, USA. Our analysis tests two prevailing hypotheses: (1) the range front of the San Gabriel Mountains is at steady state, in which rock uplift balances erosion and topographic elevations are stable throughout time, and (2) that west-to-east increases in elevation, relief, erosion rate, and stream-channel steepness across the interior of the massif reflect a parallel reverse-slip rate gradient on the range-bounding Sierra Madre−Cucamonga fault zone. We show that although deviations from steady state occur, the range-front hillslopes and stream channels are typically both well-connected and adjusted to patterns in Quaternary uplift driven by motion on the range-front fault network. Accordingly, landscape morphometrics, 10 Be erosion rates, and model erosion rates effectively image spatial and temporal patterns in uplift. Interpreted jointly, these data reveal comparable peak slip rates on the Sierra Madre−Cucamonga fault zone and show that they do not monotonically increase from west to east. Thus, the eastward-increasing gradients developed within the interior of the massif are not solely related to reverse slip on the range-front faults. Evaluated on shorter length scales (<10 km), morphometric data corroborate earlier descriptions of the Sierra Madre−Cucamonga fault zone as multiple individual faults or fault sections, with slip rates tapering toward fault tips. We infer that these patterns imply the predominance of independent fault or fault section ruptures throughout the Quaternary, though data cannot rule out the possibility of large, connected Sierra Madre−Cucamonga fault zone ruptures. Deeper in the hanging wall of the Sierra Madre−Cucamonga fault zone, secondary faults accommodate range-front uplift. Motion on these faults may contribute to active uplift of the highest topography within the massif, in addition to partly reconciling differences between geologic and geodetic Sierra Madre−Cucamonga fault zone reverse-slip rates. This study provides a new, unified perspective on tectonics and landscape evolution in the San Gabriel Mountains.

California↗

USGS2006

Earthquake and volcano clustering via stress transfer at Yucca Mountain, Nevada

The proposed national high-level nuclear waste repository at Yucca Mountain is close to Quaternary cinder cones and faults with Quaternary slip. Volcano eruption and earthquake frequencies are low, with indications of spatial and temporal clustering, making probabilistic assessments difficult. In an effort to identify the most likely intrusion sites, we based a three-dimensional finite-element model on the expectation that faulting and basalt intrusions are sensitive to the magnitude and orientation of the least principal stress in extensional terranes. We found that in the absence of fault slip, variation in overburden pressure caused a stress state that preferentially favored intrusions at Crater Flat. However, when we allowed central Yucca Mountain faults to slip in the model, we found that magmatic clustering was not favored at Crater Flat or in the central Yucca Mountain block. Instead, we calculated that the stress field was most encouraging to intrusions near fault terminations, consistent with the location of the most recent volcanism at Yucca Mountain, the Lathrop Wells cone. We found this linked fault and magmatic system to be mutually reinforcing in the model in that Lathrop Wells feeder dike inflation favored renewed fault slip. ?? 2006 Geological Society of America.

Geology↗

USGS2020

Climatically driven displacement on the Eglington fault, Las Vegas, Nevada

The Eglington fault is one of several intrabasinal faults in the Las Vegas Valley, Nevada and is the only one recognized as a source for significant earthquakes. Its broad warp displaces late Pleistocene paleo-spring deposits of the Las Vegas Formation, which record hydrologic fluctuations that occurred in response to millennial and submillennial-scale climate oscillations throughout the late Quaternary. The sediments allow us to constrain the timing of displacement on the Eglington fault and identify hydrologic changes that are temporally coincident with that event. The fault warps deposits that represent widespread marshes that filled the valley between 31.7 and 27.6 ka. These marshes desiccated abruptly in response to warming and groundwater lowering during Dansgaard-Oeschger (D-O) events 4 and 3, resulting in the formation of a pervasive, hard carbonate cap by 27.0 ka. Vertical offset by as much as 4.2 meters occurred after the cap hardened, and most likely after younger marshes desiccated irreversibly due to a sudden depression of the water table during D-O 2, beginning at 23.3 ka. The timing of displacement is further constrained to before 19.5 ka as evidenced by undeformed spring deposits that are inset into the incised topography of the warp. Coulomb stress calculations validate the hypothesis that the significant groundwater decline during D-O 2 triggered fault displacement through unloading of vertical stress of the water column. The synchroneity of this abrupt hydrologic change and warping on the Eglington fault suggests that climatically modulated tectonics operated in the Las Vegas Valley during the late Quaternary.

Nevada↗

USGS2012

Subducting plate geology in three great earthquake ruptures of the western Alaska margin, Kodiak to Unimak

Three destructive earthquakes along the Alaska subduction zone sourced transoceanic tsunamis during the past 70 years. Since it is reasoned that past rupture areas might again source tsunamis in the future, we studied potential asperities and barriers in the subduction zone by examining Quaternary Gulf of Alaska plate history, geophysical data, and morphology. We relate the aftershock areas to subducting lower plate relief and dissimilar materials in the seismogenic zone in the 1964 Kodiak and adjacent 1938 Semidi Islands earthquake segments. In the 1946 Unimak earthquake segment, the exposed lower plate seafloor lacks major relief that might organize great earthquake rupture. However, the upper plate contains a deep transverse-trending basin and basement ridges associated with the Eocene continental Alaska convergent margin transition to the Aleutian island arc. These upper plate features are sufficiently large to have affected rupture propagation. In addition, massive slope failure in the Unimak area may explain the local 42-m-high 1946 tsunami runup. Although Quaternary geologic and tectonic processes included accretion to form a frontal prism, the study of seismic images, samples, and continental slope physiography shows a previous history of tectonic erosion. Implied asperities and barriers in the seismogenic zone could organize future great earthquake rupture.

Alaska↗

USGS2015

A summary of the late Cenozoic stratigraphic and tectonic history of the Santa Clara Valley, California

The late Cenozoic stratigraphic and tectonic history of the Santa Clara Valley illustrates the dynamic nature of the North American–Pacific plate boundary and its effect on basin and landscape development. Prior to early Miocene time, the area that became Santa Clara Valley consisted of eroding Franciscan complex basement structurally interleaved in places with Coast Range ophiolite and Mesozoic Great Valley sequence, and locally overlapped by Paleogene strata. During early to middle Miocene time, this landscape was flooded by the sea and was deformed locally into deeper depressions such as the Cupertino Basin in the southwestern part of the valley. Marine deposition during the middle and late Miocene laid down thin deposits in shallow water and thick deeper-water deposits in the Cupertino Basin. During this sedimentation, the San Andreas fault system encroached into the valley, with most offset partitioned onto the San Andreas fault southwest of the valley and the southern Calaveras–Silver Creek–Hayward fault system in the northeastern part of the valley. A 6-km-wide right step between the Hayward and Silver Creek faults formed the 40-km-long Evergreen pull-apart basin along the northeastern margin of the valley, leaving a basement ridge between it and the Cupertino Basin. The Silver Creek fault was largely abandoned ca. 2.5 Ma in favor of a compressional left step between the Calaveras and Hayward fault, although some slip continued to at least mid-Quaternary time. Gravity, seismic, stratigraphic, and interferometric synthetic aperture radar (InSAR) data indicate no other major San Andreas system faults within the central block between the present-day range-front faults bounding the valley and the Silver Creek fault. Sometime between 9 and 4 Ma (9 and 1 Ma for the central block), the area rose above sea level, and a regional surface of erosion was carved into the Mesozoic and Tertiary rocks. Alluvial gravels were deposited on this surface along the margins of the valley beginning ca. 4 Ma, but they may not have prograded onto the central block until ca. 1 Ma, because no older equivalents of the Pliocene–Quaternary Santa Clara gravels have been found there. Thus, either the central block was high enough relative to the surrounding areas that Santa Clara gravels were never deposited on it, or any Santa Clara gravels deposited there were stripped away before ca. 1 Ma. Analysis of alluvium on the central block implies a remarkably uniform, piston-like, subsidence of the valley of ∼0.4 mm/yr since ca. 0.8 Ma, possibly extending north to northern San Francisco Bay. Today, the central block continues to subside, the range-front reverse faults are active, and the major active faults of the San Andreas system are mostly outside the valley.

California↗

USGS2016

Structure of the Hat Creek graben region: Implications for the structure of the Hat Creek graben and transfer of right-lateral shear from the Walker Lane north of Lassen Peak, northern California, from gravity and magnetic anomalies

Interpretation of magnetic and new gravity data provides constraints on the geometry of the Hat Creek Fault, the amount of right-lateral offset in the area between Mt. Shasta and Lassen Peak, and confirmation of the influence of pre-existing structure on Quaternary faulting. Neogene volcanic rocks coincide with short-wavelength magnetic anomalies of both normal and reversed polarity, whereas a markedly smoother magnetic field occurs over the Klamath Mountains and its Paleogene cover. Although the magnetic field over the Neogene volcanic rocks is complex, the Hat Creek Fault, which is one of the most prominent normal faults in the region and forms the eastern margin of the Hat Creek Valley, is marked by the eastern edge of a north-trending magnetic and gravity high 20-30 km long. Modeling of these anomalies indicates that the fault is a steeply dipping (~75-85°) structure. The spatial relationship of the fault as modeled by the potential-field data, the youngest strand of the fault, and relocated seismicity suggests that deformation continues to step westward across the valley, consistent with a component of right-lateral slip in an extensional environment. Filtered aeromagnetic data highlight a concealed magnetic body of Mesozoic or older age north of Hat Creek Valley. The body’s northwest margin strikes northeast and is linear over a distance of ~40 km. Within the resolution of the aeromagnetic data (1-2 km), we discern no right-lateral offset of this body. Furthermore, Quaternary faults change strike or appear to end, as if to avoid this concealed magnetic body and to pass along its southeast edge, suggesting that pre-existing crustal structure influenced younger faulting, as previously proposed based on gravity data.

California, Nevada↗