SEARCH · Geology Reports

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources

USGS2016

Documentation and hydrologic analysis of Hurricane Sandy in New Jersey, October 29–30, 2012

In 2012, a late season tropical depression developed into a tropical storm and later a hurricane. The hurricane, named “Hurricane Sandy,” gained strength to a Category 3 storm on October 25, 2012, and underwent several transitions on its approach to the mid-Atlantic region of the eastern coast of the United States. By October 28, 2012, Hurricane Sandy had strengthened into the largest hurricane ever recorded in the North Atlantic and was tracking parallel to the east coast of United States, heading toward New Jersey. On October 29, 2012, the storm turned west-northwest and made landfall near Atlantic City, N.J. The high winds and wind-driven storm surge caused massive damage along the entire coastline of New Jersey. Millions of people were left without power or communication networks. Many homes were completely destroyed. Sand dunes were eroded, and the barrier island at Mantoloking was breached, connecting the ocean with Barnegat Bay. Several days before the storm made landfall in New Jersey, the U.S. Geological Survey (USGS) made a decision to deploy a temporary network of storm-tide sensors and barometric pressure sensors from Virginia to Maine to supplement the existing USGS and National Oceanic and Atmospheric Administration (NOAA) networks of permanent tide monitoring stations. After the storm made landfall, the USGS conducted a sensor data recovery and high-water-mark collection campaign in cooperation with the Federal Emergency Management Agency (FEMA). Peak storm-tide elevations documented at USGS tide gages, tidal crest-stage gages, temporary storm sensor locations, and high-water-mark sites indicate the area from southern Monmouth County, N.J., north through Raritan Bay, N.J., had the highest peak storm-tide elevations during this storm. The USGS tide gages at Raritan River at South Amboy and Raritan Bay at Keansburg, part of the New Jersey Tide Telemetry System, each recorded peak storm-tide elevations of greater than 13 feet (ft)—more than 5 ft higher than the previously recorded period-of-record maximum. A comparison of peak storm-tide elevations to preliminary FEMA Coastal Flood Insurance Study flood elevations indicated that these areas experienced the highest recurrence intervals along the coast of New Jersey. Analysis showed peak storm-tide elevations exceeded the 100-year FEMA flood elevations in many parts of Middlesex, Union, Essex, Hudson, and Bergen Counties, and peak storm-tide elevations at many locations in Monmouth County exceeded the 500-year recurrence interval. A level 1 HAZUS (HAZards United States) analysis was done for the counties in New Jersey affected by flooding to estimate total building stock losses. The aggregated total building stock losses estimated by HAZUS for New Jersey, on the basis of the final inundation verified by USGS high-water marks, was almost $19 billion. A comparison of Hurricane Sandy with historic coastal storms showed that peak storm-tide elevations associated with Hurricane Sandy exceeded most of the previously documented elevations associated with the storms of December 1992, March 1962, September 1960, and September 1944 at many coastal communities in New Jersey. This scientific investigation report was prepared in cooperation with FEMA to document flood processes and flood damages resulting from this storm and to assist in future flood mitigation actions in New Jersey.

New Jersey↗

USGS1953

Geology of the Naturita NW quadrangle, Colorado

The Naturita NW quadrangle is one of eighteen 7 1/2-minute quadrangles covering the principal carnotite-producing area of southwestern Colorado. The geology of these quadrangles were mapped by the U.S. Geological Survey on behalf of the U.S. Atomic Energy Commission as part of a comprehensive study of carnotite deposits. The rocks exposed in the eighteen quadrangles consist of crystalline rocks of pre-Cambrian age and sedimentary rocks that range in age from late Paleozoic to Quaternary. Over much of the area the sedimentary rocks are flat lying, but in places the rocks are disrupted by high-angle faults, and northwest-trending folds. Conspicuous among the folds are large anticlines having cores of intrusive salt and gypsum. Most of the carnotite deposits are confined to the Salt Wash sandstone member of the Jurassic Morrison formation. Within this sandstone, most of the deposits are spottily distributed through an arcuate zone known as the "Uravan Mineral Belt". Individual deposits range in size from irregular masses containing only a few tons of ore to large, tabular masses containing many thousands of tons. The ore consists largely of sandstone selectively impregnated and in part replaced by uranium and vanadium minerals. Most of the deposits appear ro be related to certain sedimentary structures in sandstones of favorable composition.

Colorado↗

USGS2000

Hydrogeology of the regional aquifer near Flagstaff, Arizona, 1994-97

Sandstones, siltstones, and limestones that are Pennsylvanian to Permian in age underlie the southern part of the Colorado Plateau near Flagstaff, Arizona, and contain a complex regional aquifer that has become increasingly important as a source of water for domestic, municipal, and recreational uses. Ground-water flow in the regional aquifer is poorly understood in this area because (1) depth of the aquifer limits exploratory drilling and testing and (2) the geologic structure increases the complexity of the aquifer characteristics and the ground-water flow system. Four methods were used to improve the understanding of the hydrogeology of the regional aquifer near Flagstaff. • Remote-sensing techniques and geologic mapping provided data to identify many structural features that indicate a more complex structural environment and history than previously realized. • Data from surface-geophysical techniques that included ground-penetrating radar, seismic reflection and seismic refraction, and square-array resistivity, verified that some of the geologic structures expressed at land surface propagate deep into the subsurface and through the principal water-bearing zones of the regional aquifer at near-vertical angles. • A well and spring inventory, borehole-geophysical methods, and well and aquifer tests provided additional information relating aquifer and ground-water flow characteristics to geologic structure. • Water-chemistry data, which included major ion, nutrient, trace-element, and radioactive and stable-isotope analyses, provided an independent means of verifying the hydrogeologic characteristics of the aquifer and were used to determine recharge and discharge areas, groundwater movement, and ground-water age. Ground-water recharge occurs throughout the area but is greatest at higher altitudes where precipitation is greater and in areas where heavily fractured rock units of the aquifer are exposed. The estimated annual average recharge to the regional aquifer in the study area is about 290,000 acre-feet. Ground water flows laterally and vertically through pore spaces in the rock and along faults and other fractures from high-altitude areas in the southern part of the study area to regional drains north of the study area along the Little Colorado and Colorado Rivers, and to drains south of the study area along Oak Creek and the Verde Valley. Ground-water discharge in these areas—about 400,000 acre-feet per year—exceeds the annual recharge to the aquifer in the Flagstaff area, but ground water from areas outside the study area contributes to this discharge as well. The saturated thickness of the regional aquifer averages about 1,200 feet, and the amount of water in storage could be as much as 4,800,000 acrefeet, or about 10 percent of the total volume of the aquifer. The quality of water in the regional aquifer in terms of dissolved-solids concentrations is good for most uses throughout the area. Dissolvedsolids concentrations generally are less than 500 milligrams per liter. Water in the regional aquifer is primarily a calcium magnesium bicarbonate type. In some areas near the Rio de Flag, the water has significant nitrate and chloride components, which indicate direct recharge in these areas from the Rio de Flag. Oxygen and deuterium data indicate a common recharge source for water in the aquifer and that some sites receive recharge from surface waters where evaporation has occurred. Estimated carbon-14 ages and tritium activities indicate ground-water ages from less than 200 years in the Lake Mary area to more than 5,000 years in the Wupatki area. The regional aquifer is heterogeneous and anisotrophic and has a complex ground-water flow system. The most productive water-bearing material tends to be fine- to medium-grained sandstones, and ground-water flow and potential well yields are related to geologic structure. Fracturing associated with structural deformation increases recharge locally and also increases the potential for high well yields. Surface-geophysical techniques provided information on the orientation of high-angle, deep-seated structure in the saturated zone. Borehole-geophysical data identified horizontal to near-horizontal fractures as significant components of the fracture-flow system not apparent in the surface-geophysical data. Structural features that strike northwest appear to be areas that have the greatest potential for high well yields. A north-northeastward-striking structure may be just as promising, but additional data are needed to verify this relation.

Arizona↗

USGS1977

Microwave radiometric survey of the San Joaquin nuclear project site, Kern County, California

An airborne microwave survey was made in the region of the San Joaquin nuclear project site near Bakersfield, Calif. The purpose of the study was to determine if the variability of soil emissivity due to moisture content is a valid near-surface expression of buried fault systems. The results showed the existence of linear-emissivity anomalies paralleling, and to some extent, overlying the Greeley and Pond-Poso Creek faults. The anomalies seem to be direct expressions of silt-filled, northwesterly trending channels of the Pond-Poso Creek-Tulare Lake distributary system. The location, orientation, and linearity of the distributary channels suggest an association with buried faults, but no relationship has yet been determined.

California↗

USGS2024

Hydrogeologic conceptual model of groundwater occurrence and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River is a major concern in the southwestern United States where the river provides water to about 40 million people for municipal and industrial use and is used to irrigate about 5.5 million acres of land. Much of the salinity in the Colorado River Basin is derived from natural interactions of surface water and groundwater with various geologic materials (rocks, soils, and alluvial deposits). The Dolores River in southwest Colorado is a major tributary of the Colorado River that historically accounts for about 6 percent of the salinity load to the Upper Colorado River Basin with the Paradox Valley being the primary source of salinity to the Dolores River. The Paradox Valley, one of several salt-anticline valleys in the region, is a fault-bounded topographic basin aligned with and exposing an underlying salt-anticline core. Salt deposits in the Pennsylvanian Paradox Formation of the Hermosa Group form an elongated salt diapir oriented northwest to southeast that is up to 12,000 feet (ft) thick beneath the present valley floor. Surface erosion, groundwater circulation, and weathering during Tertiary and Quaternary valley formation contributed to development of a cap rock, collapse features, breccia, and brine at the top of the exposed salt diapir. Today (2023), brine occurring in the brecciated cap rock and underlying salt deposits is in hydraulic connection with an overlying freshwater alluvial aquifer, and depending on seasonal river stage and hydrologic conditions, the brine discharges to the Dolores River causing the observed increase in salinity as the river crosses the Paradox Valley. To reduce salinity concentrations in the Dolores River, the Bureau of Reclamation (Reclamation) operates the Paradox Valley Unit (PVU). The PVU project consists of nine shallow brine pumping wells near the Dolores River and one deep disposal well where the brine is injected for disposal. When operational, the PVU pumping wells extract brine from the base of the alluvial aquifer that is piped and injected into a deep disposal well about 3 miles southwest of the PVU. The PVU became fully operational July 1, 1996, and by 2015, operation of the PVU had reduced salinity concentrations in the Dolores River by as much as 70 percent compared to pre-PVU conditions. In response to a 4.5 magnitude earthquake, injection operations, and thus PVU pumping, were ceased from March 2019 to June 2022. A trial period of PVU operation began in June 2022 with a reduced injection rate, and thus PVU pumping rate, of about two-thirds capacity to gather additional information and guide future operational decisions. In cooperation with Reclamation, the U.S. Geological Survey (USGS) developed this report to present the current (2023) understanding of groundwater and brine occurrence and discharge to the Dolores River in the Paradox Valley. Results from the compilation of spatial datasets, groundwater sampling and age dating, and aquifer tests are presented to provide improved understanding of the Paradox Valley hydrogeology, to supply datasets for a numerical groundwater-flow and brine-transport model, and to support future operations of the PVU. The hydrogeologic data provided herein, along with the most recent loading analysis for the Dolores River in the Paradox Valley, and a previous conceptual model for brine discharge to the river are used to present a conceptual understanding of groundwater occurrence in the Paradox Valley.

Colorado↗

USGS2004

Geologic map of the Bend 30- x 60-minute quadrangle, central Oregon

This map presents the stratigraphic and structural setting of volcanic and sedimentary strata deposited during the past 35 million years across 4,430 km2 in central Oregon. Snowfall in the Cascade Range (west part of map area) recharges important aquifers in the Deschutes basin (central part of map). The area includes the majestic peaks of the Three Sisters volcanoes, where continued eruptions of basalt and rhyolite in the past 3,000 years indicate an ongoing volcanic hazard. The Sisters fault zone, with several potentially active faults, traverses the map from southeast to northwest.

IMAP↗

USGS1952

Results of diamond drilling and geologic investigation of the Shirley May (Garo) uranium deposit, Park County, Colorado

The Shirley May (Garo) uranium deposit near Garo, Park County, Colo., consists of tyuyamunite and carnotite that occur as disseminations and as fracture fillings in three beds of medium- to coarse-grained sandstone. The sandstones are in the Maroon formation of Permian age. This deposit was explored by means of 12 core-drill holes, totalling 2,003 feet. The deposit is on the northeast flank of the Garo anticline, a local structure that probably is related to Tertiary tectonic movement. In the vicinity of the deposit the sedimentary rocks strike northwest and dip steeply. They are cut by numerous northerly-trending faults that have horizontal displacements of as much as 1,000 feet. The ore minerals tyuyamunite, carnotite, volborthite, calciovolborthite, malachite, azurite, chalcocite(?) , and an unidentified yellow to dark-red vanadium oxide are restricted to a complexly faulted area. The ore body that has yielded most of the uranium ore is in the uppermost ore-bearing sandstone (bed no. 1) and is stratigraphically 50 and 150 feet above the ore horizons in sandstones nos. 2 and 3, respectively. The uranium content of samples from the mine workings ranges from 0. 001 to 0. 48 percent uranium; dump samples contain as much as 2.39 percent uranium. A total of 40 tons of uranium ore, averaging 1.0 percent uranium, was produced in 1919.

Colorado↗

USGS2016

Arsenic and radionuclide occurrence and relation to geochemistry in groundwater of the Gulf Coast Aquifer System in Houston, Texas, 2007–11

The U.S. Geological Survey (USGS), in cooperation with the City of Houston, began a study in 2007 to determine concentrations, spatial extent, and associated geochemical conditions that might be conducive for mobility and transport of selected naturally occurring trace elements and radionuclides in the Gulf Coast aquifer system in Houston, Texas. Water samples were collected from 91 municipal supply wells completed in the Evangeline and Chicot aquifers of the Gulf Coast aquifer system in northeastern, northwestern, and southwestern Houston; hereinafter referred to as northeast, northwest and southwest Houston areas. Wells were sampled in three phases: (1) 28 municipal supply wells were sampled during 2007–8, (2) 60 municipal supply wells during 2010, and (3) 3 municipal supply wells during December 2011. During each phase of sampling, samples were analyzed for major ions, selected trace elements, and radionuclides. At a subset of wells, concentrations of arsenic species and other radionuclides (carbon-14, radium-226, radium-228, radon-222, and tritium) also were analyzed. Selected physicochemical properties were measured in the field at the time each sample was collected, and oxidation-reduction potential and unfiltered sulfides also were measured at selected wells. The source-water (the raw, ambient water withdrawn from municipal supply wells prior to water treatment) samples were collected for assessment of aquifer conditions in order to provide community water-system operators information that could be important when they make decisions about which treatment processes to apply before distributing finished drinking water. Geochemical conditions of groundwater of the Gulf Coast aquifer system are suitable in some instances for release of arsenic and radionuclides from aquifer materials. Recent changes to the U.S. Environmental Protection Agency (EPA) primary drinking-water regulations for arsenic and a selected number of natural radionuclides have highlighted the necessity for municipal supply system managers to be aware of the occurrence and distribution of these constituents in their source water. Concentrations of arsenic ranged from 0.58 to 23.5 micrograms per liter (μg/L), with relatively low median and 75th percentile concentrations (2.7 and 3.6 μg/L, respectively). The gross alpha-particle activity completed within 72 hours after sample collection ranged from R-1.1 (nondetect where the result was below the sample specific critical level) to 39.7 picocuries per liter (pCi/L), with a median of 10.3 pCi/L. After 30 days, the gross alpha-particle activities in the 91 samples ranged from R-0.94 to 25.5 pCi/L, with a median of 5.60 pCi/L. Concentrations of uranium ranged from less than 0.02 to 42.7 μg/L, with a median value of 1.69 μg/L and a 75th-percentile value of 6.48 μg/L. The maximum concentrations of radium-226 and combined radium (sum of radium-226 plus radium-228) were 4.34 pCi/L and 3.23 pCi/L, respectively. Aquifer major-ion geochemistry was characterized and shown to contain three chemical types of water as grouped by a simplified predominant cation and anion classification system: (1) calcium- bicarbonate type, (2) sodium-bicarbonate type, and (3) sodium-chloride type. Aquifer geochemistry also was characterized into four reduction-oxidation (redox) categories: (1) oxic, (2) suboxic, (3) mixed, and (4) anoxic. Within the anoxic category, groundwater was further characterized into four presumed predominant reduction processes: (1) iron or sulfate or both [Fe(III)/SO 4 ] reducing, (2) iron [Fe(III)] reducing, (3) iron and sulfate [Fe(III)-SO 4 ] reducing, or (4) methanogenic, as defined by composition of redox species. The oxic category was associated with calcium-bicarbonate-type water, and the methanogenic-anoxic process was associated exclusively with the sodium-bicarbonate-type water. The species of arsenic and the dominant radionuclide present were associated with specific redox categories. Arsenate was associated primarily with oxic water and did not exceed 3.5 µg/L, whereas arsenite was associated with iron-reducing, anoxic water samples and, at the highest concentrations, occurred in sulfate-reducing, anoxic; methanogenic-anoxic; or both water samples. Uranium was associated exclusively with the oxic water, whereas the highest concentrations of combined radium were associated with the iron-reducing, anoxic water. The gross alpha-particle activity was greatest in the oxic waters where the source of the radioactivity was the uranium. Associated geochemical conditions conducive for mobility of arsenic and radionuclides and their spatial and vertical extent in the Gulf Coast aquifer system in Houston are important aspects to the areal management of the municipal groundwater supplies in Houston. Ongoing research is seeking to define chemical or geological factors that are the optimal indicators for elevated concentrations of these naturally occurring constituents.

Texas↗

USGS2003

High resolution seismic imaging of faults beneath Limón Bay, northern Panama Canal, Republic of Panama

High-resolution seismic reflection profiles from Limo??n Bay, Republic of Panama, were acquired as part of a seismic hazard investigation of the northern Panama Canal region. The seismic profiles image gently west and northwest dipping strata of upper Miocene Gatu??n Formation, unconformably overlain by a thin (<20 m) sequence of Holocene muds. Numerous faults, which have northeast trends where they can be correlated between seismic profiles, break the upper Miocene strata. Some of the faults have normal displacement, but on many faults, the amount and type of displacement cannot be determined. The age of displacement is constrained to be Late Miocene or younger, and regional geologic considerations suggest Pliocene movement. The faults may be part of a more extensive set of north- to northeast-trending faults and fractures in the canal region of central Panama. Low topography and the faults in the canal area may be the result of the modern regional stress field, bending of the Isthmus of Panama, shearing in eastern Panama, or minor deformation of the Panama Block above the Caribbean subduction zone. For seismic hazard analysis of the northern canal area, these faults led us to include a source zone of shallow faults proximal to northern canal facilities. ?? 2003 Elsevier B.V. All rights reserved.

Tectonophysics↗

USGS1977

Water resources data for Florida, water year 1976; Volume 4. Northwest Florida--surface water, ground water, and quality of water

Water resources data for the 1976 water year for northwest Florida consist of records of stage, discharge, and water quality of streams; elevation and water quality of lakes and reservoirs; water-levels and water quality of wells; and discharge and water quality of springs. Additional water data were collected at various sites, not part of the systematic data collection program, and are published as miscellaneous measurements. These data represent that part of the National Water Data System operated by the U.S. Geological Survey and cooperating state and federal agencies in Florida.

Florida↗

USGS1971

Evolution of thought on ore controls in east Tennessee

All early students of the zinc and barite deposits of East Tennessee, noting the geographic coincidence of the principal mining area with complex late Paleozoic geologic structure, concluded that (1) the ore-bearing breccias were produced by Appalachian tectonic forces and that (2) mineralizing solutions gained access through fault-produced channelways. In 1931, Ulrich suggested that the breccias were produced by collapse and fragmentation resulting from solution of the carbonate rocks. This idea was promptly rejected by most geologists, and for the next 15 years nearly all papers on these deposits contained refutations of Ulrich's hypothesis and "proof" of the late Paleozoic tectonic origin of the breccias. Recognition by Odell in 1950 of a spatial association between thinning of the lime-stone zone of the Kingsport Formation and the presence of ore bodies, plus the observation that all identifiable blocks in the breccias were displaced downward as much as 30 to 50 feet, led him to suggest that foundering of the rocks over solution-thinned zones produced the breccias. Hydrothermal fluids, rather than ordinary ground water, were thought to be the dissolving agent.Kendall, in 1960, described a stratified "varved" matrix with detrital sphalerite grains in many breccias at Jefferson City, in which lamination is parallel to bedding of the host Kingsport Formation, indicating that both brecciation and mineralization occurred while the rocks were horizontal. Ruskell about 1960 pointed out the similarity between cross sections of southwest Wisconsin ore bodies and those of East Tennessee when the latter were rotated to a horizontal position. Detailed studies of the post-Knox unconformity led to recognition of a paleokarst topography of considerable relief developed on this surface. Regional stratigraphic studies of the Knox Group by Harris demonstrated the probability of pre-Middle Ordovician exposure of the Kingsport somewhere to the north or northwest, providing a recharge area for ground waters at that time. Detailed mapping of ore bodies, barren areas, and related structures by the mining-company geologists, plus application of the principles of ground-water hydrology and rock mechanics, has led to the theory, generally accepted in the district, of solution-collapse origin of the breccias, probably during Ordovician time.

Tennessee↗

USGS1997

Bedrock geology of snyderville basin: Structural geology techniques applied to understanding the hydrogeology of a rapidly developing region, Summit County, Utah

The availability of ground water is a problem for many communities throughout the west. As these communities continue to experience growth, the initial allocation of ground water supplies proves inadequate and may force restrictions on existing, and future, development plans. Much of this new growth relies on ground water supplies extracted from fractured bedrock aquifers. An example of a community faced with this problem is western Summit County, near Park City, Utah, This area has experienced significant water shortages coupled with a 50% growth rate in the past 10-15 years. Recent housing development rests directly on complexly deformed Triassic to Jurassic sedimentary rocks in the hanging wall of the Mount Raymond-Absaroka thrust system. The primary fractured bedrock aquifers are the Nugget Sandstone, and limestones in the Thaynes and Twin Creek Formations. Ground water production and management strategies can be improved if the geometry of the structures and the flow properties of the fractured and folded bedrock can be established. We characterize the structures that may influence ground water flow at two sites: the Pinebrook and Summit Park subdivisions, which demonstrate abrupt changes (less than 1 mi/1.6 km) within the hydrogeologic systems. Geologic mapping at scales of 1:4500 (Pinebrook) and 1:9600 (Summit Park), scanline fracture mapping at the outcrop scale, geologic cross sections, water well data, and structural analysis, provides a clearer picture of the hydrogeologic setting of the aquifers in this region, and has been used to successfully site wells. In the Pinebrook area, the dominate map-scale structures of the area is the Twomile Canyon anticline, a faulted box-like to conical anticline. Widely variable bedding orientations suggest that the fold is segmented and is non-cylindrical and conical on the western limb with a fold axis that plunges to the northwest and also to the southeast, and forms a box-type fold between the middle and eastern limbs with a fold axis that plunges to the northeast. The fold is cut by several faults including the Toll Canyon fault, which we interpret as a west-directed folded hanging-wall splay off the east-directed Mt. Raymond thrust. These complex geometries may be due to at least two phases of deformation. Results from outcrop analyses show that the fractured bedrock aquifers are lithologically heterogeneous, anisotropic, and compartmentalized. Two exposures of the Toll Canyon fault show that even though the fault cores may be thin, extensive damage zones develop in the Nugget Sandstone and Thaynes Limestone, and shale smears form in the Triassic shales. The damaged zones may be regions of enhanced fracture permeability, whereas the shale smears act as flow barriers. The orientation, density, and hydrogeologic characteristics for predominate fracture sets vary within meters. In the Summit Park area, chronic water shortages required new wells to be sited in the northeast-plunging Summit Park anticline. The anticline experienced two phases of folding and at least one episode of faulting. Structural analysis of the fold defined the geometry of the structure, and a down plunge projection along the fold hinge was used to estimate the location of the Nugget Sandstone at a depth of 700 ft (213 m). The crestal region of the anticline was drilled in order to intercept regions of higher fracture density in the fold. The test well penetrated the Nugget Sandstone at 698 ft depth, and two production wells with long-term yields of 120 and 180 gpm completed. One well in the Sliderock Member (Twin Creek Formation) experiences seasonal fluctuations whereas production in the Nugget sandstone has only subdued seasonal variations, suggesting the Nugget may have great storage. Complex structures work against the typical basin yield approach for water budgets, therefore, water supply estimates may benefit from detailed studies within local areas. The results of this study demonstrate how tradition

Brigham Young University Geology Studies↗

USGS2017

The Hayes tephra deposits, and upper Holocene marker horizon in south-central Alaska

The most widespread of all Holocene tephra deposits in the Cook Inlet region of south-central Alaska is a set of deposits from Hayes volcano. Because of their unique phenocryst content-biotite in rare amounts and a high proportion of amphibole to pyroxene-the deposits are readily identifiable at all but the most distant sites where they are very fine grained. Eighteen radiocarbon dates from eight upland sites limit the age of the tephra set to between about 3500 and 3800 yr. The set originated at Hayes volcano in the Tordrillo Mountains 150 km northwest of Anchorage; seven or possibly eight closely succeeding deposits, low-silica dacite in composition, compose two main lobes that extend northeast for 400 km and south for at least 250 km from the vent. We estimate the total tephra volume to be 10 km3; multiple layers imply four to six larger and two or three smaller eruptions. The deposits are a nearly isochronous marker horizon that should be useful in future archeologic, geologic, and palynologic studies in the region. ?? 1990.

Quaternary Research↗

USGS2020

Surface displacement distributions for the July 2019 Ridgecrest, California earthquake ruptures

Surface rupture in the 2019 Ridgecrest, California, earthquake sequence occurred along two orthogonal cross faults and includes dominantly left‐lateral and northeast‐striking rupture in the M w "> M w 6.4 foreshock and dominantly right‐lateral and northwest‐striking rupture in the M w "> M w 7.1 mainshock. We present > 650 "> > 650 field‐based, surface‐displacement observations for these ruptures and synthesize our results into cumulative along‐strike displacement distributions. Using these data, we calculate displacement gradients and compare our results with historical strike‐slip ruptures in the eastern California shear zone. For the M w "> M w 6.4 rupture, we report 96 displacements measured along 18 km of northeast‐striking rupture. Cumulative displacement curves for the rupture yield a mean left‐lateral displacement of 0.3–0.5 m and maximum of 0.7–1.6 m. Net mean vertical displacement based on the difference of down‐to‐the‐west (DTW) and down‐to‐the‐east (DTE) displacement curves is close to zero (0.02 m DTW). The M w "> M w 6.4 displacement distribution shows that the majority of displacement occurred southwest of the intersection with the M w "> M w 7.1 rupture. The M w "> M w 7.1 rupture is northwest‐striking and 50 km long based on 576 field measurements. Displacement curves indicate a mean right‐lateral displacement of 1.2–1.7 m and a maximum of 4.3–7.0 m. Net vertical displacement in the rupture averages 0.3 m DTW. The M w "> M w 7.1 displacement distributions demonstrate that maximum displacement occurred along a 12‐km‐long portion of the fault near the M w "> M w 7.1 epicenter, releasing 66% of the geologically based seismic moment along 24% of the total rupture length. Using our displacement distributions, we calculate kilometer‐scale displacement gradients for the M w "> M w 7.1 rupture. The steepest gradients ( ⁠ ∼ 1 – 3    m / km "> ∼ 1 – 3 m / km ⁠ ) flank the 12‐km‐long region of maximum displacement. In contrast, gradients for the 1992 M w "> M w 7.3 Landers and 1999 M w "> M w 7.1 Hector Mine earthquakes are < 0.6    m / km "> < 0.6 m / km . Our displacement distributions are important for understanding the influence of cross‐fault rupture on M w "> M w 6.4 and 7.1 rupture length and displacement and will facilitate comparisons with distributions generated remotely and at broader scales.

California↗

USGS2011

Chloride control and monitoring program in the Wichita River Basin, Texas, 1996–2009

Water resources of the Wichita River Basin in north-central Texas are vital to the water users in Wichita Falls, Tex., and surrounding areas. The Wichita River Basin includes three major forks of the Wichita River upstream from Lake Kemp, approximately 50 miles southwest of Wichita Falls, Tex. The main stem of the Wichita River is formed by the confluence of the North Wichita River and Middle Fork Wichita River upstream from Truscott Brine Lake. The confluence of the South Wichita River with the Wichita River is northwest of Seymour, Tex. (fig. 1). Waters from the Wichita River Basin, which is part of the Red River Basin, are characterized by high concentrations of chloride and other salinity-related constituents from salt springs and seeps (hereinafter salt springs) in the upper reaches of the basin. These salt springs have their origins in the Permian Period when the Texas Panhandle and western Oklahoma areas were covered by a broad shallow sea. Over geologic time, evaporation of the shallow seas resulted in the formation of salt deposits, which today are part of the geologic formations underlying the area. Groundwater in these formations is characterized by high chloride concentrations from these salt deposits, and some of this groundwater is discharged by the salt springs into the Wichita River.

Texas↗

USGS1987

Geology of the Ar Rahail ancient gold mine, Kingdom of Saudi Arabia

The Ar Rahail ancient gold mine is a collection of ancient workings in metasedimentary rocks of the Murdama Group adjacent to, and above the flanks of the Rahail stock. Injection of mafic dikes of regional origin was followed by emplacement of the Rahail stock, which consisted of early dikes of porphyritic biotite-bearing hornblende granodiorite, and a later cupola of porphyritic monzogranite. Crystallization of the cupola produced a molybdenum-bearing quartz vein stockwork. Intrusion-heated fluids developed chlorite and sericite alteration zones in the older granodiorite dikes. Pre-existing northwest-trending faults, possibly re-opened by stock emplacement, were invaded by later fluids that precipitated barren quartz veins and, in the adjacent faulted wall rocks, anomalous gold and arsenic. Gold, however, is restricted to the narrow structures, and, although values as much as 4.2 g/t are present, the tonnages are inadequate for profitable mining. No further work is recommended, because the hoped for dissemination of gold between faults does not exist.

Open-File Report↗

USGS1994

Geology and geochemistry of Summitville, Colorado: An epithermal acid sulfate deposit in a volcanic dome

Geologic studies during recent open-pit mining at Summitville, Colorado, have provided new information on an epithermal acid sulfate Au-Ag-Cu deposit formed in a volcanic dome. Geologic mapping, geochemical studies of whole-rock samples from blast holes, and geologic and geochemical traverse studies refine the details of the evolution of the Summitville deposit. Six distinct events followed emplacement of the quartz latite volcanic dome and define the development of the Summitville deposit: (1) an early stage of acid sulfate alteration, (2) subsequent Cu sulfide and gold mineralization, (3) widespread hydrothermal brecciation, (4) volumetrically minor, base metal sulfide-bearing barite veining, (5) volumetrically minor, kaolinite matrix brecciation, and finally, (6) supergene oxidation. Events 1 and 2 were the most important for the formation of the Summitville deposit. Acid sulfate altered rock is primarily found in the quartz latite volcanic dome rock and consists of vuggy silica (central), quartz-alunite, quartz-kaolinite, argillic, and propylitic (distal) zones. Ore deposition (event 2) of enargite, luzonite, covellite, pyrite, native sulfur, marcasite, and minor sphalerite, native gold, + or - barite and galena overprinted the acid sulfate altered rocks. Events 3, 4, and 5 are geologically important but rarely formed units large enough to be considered mineable ore by open-pit mining. The final supergene oxidation event affected much of the near-surface portion of the deposit and leached copper and sulfide minerals forming oxide zones. Near-surface oxide zones contain the highest Au grades and decrease progressively with depth.Fractures were important fbr localizing both the acid sulfate altered rock and ore deposition at Summitville. Such fracture control is apparent despite a lack of distinct throughgoing open-space quartz veins; instead, laterally and vertically extensive ore zones are identified by their highly silicified character that can be traced laterally for up to 500 m and vertically up to 200 m. Ore zones strike parallel to regional faults related to rifting and basin and range development, suggesting that hydrothermal fluids followed preexisting fractures. Ore zones follow two northwest trends, a N 30 degrees W + or - 20 degrees trend, and a N 60 degrees W trend. Most fractures and faults in the open pit dip steeply from 65 degrees to vertical. Ore zones intersect near the center of the deposit to form a large zone approximately 150 by 400 m. Ore zones form a rough radial pattern located near the center of the deposit and a discontinuous arcuate feature on the northern side. This radial pattern, arcuate feature, and the intersection of ore zones near the center of the deposit are probably related to the intrusion of a porphyry below the deposit. The overall low Au-grade, high-tonnage character of the Summitville deposit is related to low permeability in the quartz latite volcanic dome rock and absence of well-developed open-space hydrothermal veins.Gold analyses of development drill holes and blast hole samples, in conjunction with geologic mapping in the open pit, indicate that vuggy silica, quartz-alunite, and quartz-kaolinite altered rock constitute most of the Au ore. Vuggy silica averaged 2.4 ppm Au, quartz-alunite averaged 1.2 ppm Au, and quartz-kaolinite averaged 0.86 ppm Au during open-pit mining. Grades for argillically altered rock were usually below the ore cutoff of 0.34 ppm Au. Propylitically altered rock rarely contained detectable Au concentrations (0.03 ppm Au) and constituted only waste rock. Although volumetrically minor, event 4 base metal sulfide-bearing barite veins and event 5 kaolinite matrix breccias contained high Au grades (up to about 800 ppm Au), producing approximately 5 to 15 percent of the total Au mined in the deposit.Geochemical studies of samples collected across traverses of altered and mineralized ore zones indicate that Te, Bi, and Pb are characteristic trace elements, in addition to Au, Ag, Cu, and As that are typical of acid sulfate mineral deposits. Anomalous Te is associated with Cu sulfides and gold in vuggy silica zones. Anomalous Bi and Pb concentrations correlate most consistently with quartz-alunite zones. Thallium is also anomalous at Summitville. Highest concentrations of Tl are found in argillic rock, whereas silicified zones are depleted in it. The anomalous Tl in distal zones is similar to observations in some porphyry Cu systems. Pronounced lateral zonation of Ag/Au ratios is present in the deposit. The Ag/Au ratios vary from about 2:1 near the center of the orebody to greater than 20:1 on the periphery.The Summitville deposit is located in the midlevel portion of a mineralized volcanic dome, with a porphyry system at depth, and a hot springs environment at the surface. Drill holes through the volcanic dome intersected a quartz monzonite porphyry approximately 600 m below the surface that is altered to sericite and pyrite similar to some porphyry deposits. Laterally extensive cristobalite and opal replacing quartz latite are found southwest of the deposit and represent a hot-spring environment. Bedded siliceous sinter, some of which contains plant debris, overlies the cristobalite and opal at some localities. These deposits may represent surface vents for the fluids responsible for acid sulfate alteration or mineralization of the volcanic dome.

Economic Geology↗

USGS1994

Closing of the Midcontinent-Rift - a far-field effect on Grenvillian compression

The Midcontinent rift formed in the Laurentian supercontinent between 1109 and 1094 Ma. Soon after rifting, stresses changed from extensional to compressional, and the central graben of the rift was partly inverted by thrusting on original extensional faults. Thrusting culminated at about 1060 Ma but may have begun as early as 1080 Ma. On the southwest-trending arm of the rift, the crust was shortened about 30 km; on the southeast-trending arm, strike-slip motion was dominant. The rift developed adjacent to the tectonically active Grenville province, and its rapid evolution from an extensional to a compressional feature at ca. 1080 Ma was coincident with renewal of northwest-directed thrusting in the Grenvllle, probably caused by continent-continent collision. A zone of weak lithosphere created by rifting became the locus for deformation within the otherwise strong continental lithosphere. Stresses transmitted from the Grenville province utilized this weak zone to close and invert the rift.

Geology↗