Results for “Northeastern Geology” — Page 45

USGS1983

Preliminary appraisal of the hydrology of the Rock Island area, Le Flore County, Oklahoma

Bed rock in the Rock Island area of northeastern Le Flore County in southeastern Oklahoma consists of shale, siltstone, and sandstone of the McAlester, Hartshorne, and Atoka Formations of Pennsylvanian age. The area is on the south flank of the Backbone anticline; the rocks dip to the south at 5o-45o. Alluvium along James Fork consists of sandy and clayey silt and may be as much as 30 feet thick. Water in bedrock is under artesian conditions. The depth to water in most wells is less than 20 feet below the surface; a few wells flow. Yields of most wells probably are less than 5 gallons per minute. Water from nine wells was a sodium carbonate or sodium mixed anion type; dissolved-solids concentrations ranged from 294 to 1,250 milligrams per liter. No relationship between variations in chemistry of ground water and well depth, geographic distribution, or geologic formation is apparent. James Fork has flow most of the time and discharge exceeds 25 cubic feet per second about one-half the time. The mean dissolved-solids concentration in James Fork water ranged from 224 milligrams per liter near Williams, Oklahoma, to 332 milligrams per liter near Hackett, Arkansas. Water in James Fork is a calcium magnesium sulfate type about 75 percent of the time. Maximum suspended sediment discharge was 2,720 tons per day. Silt-clay particles (diameters less than 0.062 millimeter) are the dominant sediment size. Potential hydrologic effects of surface mining for coal include: (1) Creation of additional water storage in surface-mine ponds, (2) changes in rock permeability and ground-water storage, (3) changes in runoff and streamflow characteristics, (4) changes in drainage patterns, and (5) changes in the chemical quality and sediment load of James Fork. Although mining may increase the quantities of sediment and dissolved minerals added to James Fork, detection of these increases would be difficult because the potentially mineable area is very small in proportion to the total area of the basin.

Water-Resources Investigations Report↗

USGS2013

Geologic map of the Glen Canyon Dam 30’ x 60’ quadrangle, Coconino County, northern Arizona

The Glen Canyon Dam 30’ x 60’ quadrangle is characterized by nearly flat lying to gently dipping Paleozoic and Mesozoic sedimentary strata that overlie tilted Proterozoic strata or metasedimentary and igneous rocks similar to those exposed at the bottom of Grand Canyon southwest of the quadrangle. Mississippian to Permian rocks are exposed in the walls of Marble Canyon; Permian strata and minor outcrops of Triassic strata form the surface bedrock of House Rock Valley and Marble Plateau, southwestern quarter of the quadrangle. The Paleozoic strata exposed in Marble Canyon and Grand Canyon south of the map are likely present in the subsurface of the entire quadrangle but with unknown facies and thickness changes. The Mesozoic sedimentary rocks exposed along the Vermilion and Echo Cliffs once covered the entire quadrangle, but Cenozoic erosion has removed most of these rocks from House Rock Valley and Marble Plateau areas. Mesozoic strata remain over much of the northern and eastern portions of the quadrangle where resistant Jurassic sandstone units form prominent cliffs, escarpments, mesas, buttes, and much of the surface bedrock of the Paria, Kaibito, and Rainbow Plateaus. Jurassic rocks in the northeastern part of quadrangle are cut by a sub-Cretaceous regional unconformity that bevels the Entrada Sandstone and Morrison Formation from Cummings Mesa southward to White Mesa near Kaibito. Quaternary deposits, mainly eolian, mantle much of the Paria, Kaibito, and Rainbow Plateaus in the northern and northeastern portion of the quadrangle. Alluvial deposits are widely distributed over parts of House Rock Valley and Marble Plateau in the southwest quarter of the quadrangle. The east-dipping strata of the Echo Cliffs Monocline forms a general north-south structural boundary through the central part of the quadrangle, separating Marble and Paria Plateaus west of the monocline from the Kaibito Plateau east of the monocline. The Echo Cliffs Monocline continues north of the quadrangle into southern Utah. The gentle north- and northeast-dipping Mesozoic strata on the Kaibito and Rainbow Plateaus are partly interrupted by northwest-trending, broad-based, ill-defined synclines and anticlines. These broad-based structures form mesas and buttes near anticlinal crests and deeply incised drainages in synclinal valleys. The 1,300-ft-thick (396-m-thick) Navajo Sandstone erodes into a maze of tributary slot canyons in the northeastern part of the quadrangle. Mesozoic strata in the extreme northeast corner of the quadrangle dip gently southwest due to the influence of the Monument Upwarp in southeastern Utah and by an intrusive uplift (laccolith) that forms Navajo Mountain, a prominent 10,388 ft (3,166 m) landmark just northeast of the quadrangle.

Arizona↗

USGS2007

Potentiometric Surface of the Upper Floridan Aquifer, West-Central Florida, May 2006

Introduction Hydrologic Conditions in West-Central Florida The Floridan aquifer system consists of the Upper and Lower Floridan aquifers separated by the middle confining unit. The middle confining unit and the Lower Floridan aquifer in west-central Florida generally contain highly mineralized water. The water-bearing units containing fresh water are herein referred to as the Upper Floridan aquifer. The Upper Floridan aquifer is the principal source of water in the Southwest Florida Water Management District and is used for major public supply, domestic use, irrigation, and brackish water desalination in coastal communities (Southwest Florida Water Management District, 2000). This map report shows the potentiometric surface of the Upper Floridan aquifer measured in May 2006. The potentiometric surface is an imaginary surface connecting points of equal altitude to which water will rise in tightly-cased wells that tap a confined aquifer system (Lohman, 1979). This map represents water-level conditions near the end of the dry season, when ground-water levels usually are at an annual low and withdrawals for agricultural use typically are high. The cumulative average rainfall of 50.23 inches for west-central Florida (from June 2005 through May 2006) was 2.82 inches below the historical cumulative average of 53.05 inches (Southwest Florida Water Management District, 2006). Historical cumulative averages are calculated from regional rainfall summary reports (1915 to most recent complete calendar year) and are updated monthly by the Southwest Florida Water Management District. This report, prepared by the U.S. Geological Survey in cooperation with the Southwest Florida Water Management District, is part of a semi-annual series of Upper Floridan aquifer potentiometric-surface map reports for west-central Florida. Potentiometric-surface maps have been prepared for January 1964, May 1969, May 1971, May 1973, May 1974, and for each May and September since 1975. Water-level data are collected in May and September each year to show the approximate annual low and high water-level conditions, respectively. Most of the water-level data for this map were collected by the U.S. Geological Survey during the period May 15-19, 2006. Supplemental water-level data were collected by other agencies and companies. A corresponding potentiometric-surface map was prepared for areas east and north of the Southwest Florida Water Management District boundary by the U.S. Geological Survey office in Altamonte Springs, Florida (Kinnaman, 2006). Most water-level measurements were made during a 5-day period; therefore, measurements do not represent a 'snapshot' of conditions at a specific time, nor do they necessarily coincide with the seasonal low water-level condition. Water-Level Changes Water levels in about 95 percent of the wells measured in May 2006 were lower than the May 2005 water levels (Ortiz and Blanchard, 2006). May 2006 water levels in 403 wells ranged from about 26 feet below to about 6 feet above May 2005 water levels (fig. 1). Significant water level declines occurred in eastern Manatee County, southwestern Polk County, southeastern Hillsborough County, and in all of Hardee County. The largest water level declines occurred in southwestern Hardee County. The largest water level rises occurred in south-central Pasco County, northeastern Levy County, northwestern Marion County, and along the gulf coast from Pasco County to Citrus County (fig. 1). Water levels in about 96 percent of the wells measured in May 2006 were lower than the September 2005 water levels (Ortiz, 2006). May 2006 water levels in 397 wells ranged from about 31 feet below to 3 feet above the September 2005 water levels. The largest water level decline was in west-central Hardee County and the largest rise in water levels was in south-central Pasco County.

Open-File Report↗

USGS1961

Geologic summary of the Appalachian Basin, with reference to the subsurface disposal of radioactive waste solutions

The Appalachian basin is an elongate depression in the crystalline basement complex which contains a great volume of predominantly sedimentary stratified rocks. As defined in this paper it extends from the Adirondack Mountains in New York to central Alabama. From east to west it extends from the west flank of the Blue Ridge Mountains to the crest of the Findlay and Cincinnati arches and the Nashville dome. It encompasses an area of about 207,000 square miles, including all of West Virginia and parts of New York, New Jersey, Pennsylvania, Ohio, Maryland, Virginia, Kentucky, Tennessee, North Carolina, Georgia, and Alabama. The stratified rocks that occupy the basin constitute a wedge-shaped mass whose axis of greatest thickness lies close to and parallel to the east edge of the basin. The maximum thickness of stratified rocks preserved in any one part of the basin today is between 35,000 and 40,000 feet. The volume of the sedimentary rocks is approximately 510,000 cubic miles and of volcanic rocks is a few thousand cubic miles. The sedimentary rocks are predominantly Paleozoic in age, whereas the volcanic rocks are predominantly Late Precambrian. On the basis of gross lithology the stratified rocks overlying the crystalline basement complex can be divided into nine vertically sequential units, which are designated "sequences" in this report. The boundaries between contiguous sequences do not necessarily coincide with the commonly recognized boundaries between systems or series. All sequences are grossly wedge shaped, being thickest along the eastern margin of the basin and thinnest along the western margin. The lowermost unit the Late Precambrian stratified sequence is present only along part of the eastern margin of the basin, where it lies unconformably on the basement complex. It consists largely of volcanic tuffs and flows but contains some interbedded sedimentary rocks. The Late Precambrian sequence is overlain by the Early Cambrian clastic sequence. Where the older sequence is absent, the Early Cambrian sequence rests on the basement complex. Interbedded fine- to coarse-grained noncarbonate detrital rocks comprise the bulk of the sequence, but some volcanic and carbonate rocks are included. Next above is the Cambrian-Ordovician carbonate sequence which consists largely of limestone and dolomite. Some quartzose sandstone is present in the lower part in the western half of the basin, and much shale is present in the upper part in the southeast part of the basin. The next higher sequence is the Late Ordovician clastic sequence, which consists largely of shale, siltstone, and sandstone. Coarse-grained light-gray to red rocks are common in the sequence along the eastern side of the basin, whereas fine-grained dark-gray to black calcareous rocks are common along the west side. The Late Ordovician clastic sequence is overlain unconformably in many places by the Early Silurian clastic sequence. The latter comprises a relatively thin wedge of coarse-grained clastic rocks. Some of the most prolific oil- and gas-producing sandstones in the Appalachian basin are included. Among these are the "Clinton" sands of Ohio, the Medina Sandstones of New York and Pennsylvania, and the Keefer or "Big Six" Sandstone of West Virginia and Kentucky. Conformably overlying the Early Silurian clastic sequence is the Silurian-Devonian carbonate sequence, which consists predominantly of limestone and dolomite. It also contains a salt-bearing unit in the north-central part of the basin and a thick wedge of coarse-grained red beds in the northeastern part. The sequence is absent in much of the southern part of the basin. Large volumes of gas and much oil are obtained from some of its rocks, especially from the Oriskany Sandstone and the Huntersville Ghert. The Silurian-Devonian carbonate sequence is abruptly overlain by the Devonian clastic sequence a thick succession of interbedded shale, mudrock, siltstone, and sandstone. Colors range from predominantly purple and red in the northeastern part of the basin to predominantly dark gray and black in the southwestern part. Many rocks in the upper part contain hydrocarbons in commercial quantities. The next higher sequence is a heterogeneous succession that comprises most rocks of Mississippian age in the basin. It is composed largely of fine-grained to very coarse-grained noncalcareous clastic rocks in the northern half of the basin, and largely of carbonate rocks in the southern part. Large quantities of oil and gas are produced from the sequence. The youngest sequence consists of coarse-grained clastic rocks largely of Pennsylvanian age. In the center of the basin a relatively small volume of lithologically similar rocks of Permian age are included. The sequence has been intensively mined for coal throughout most of its extent. The waste-disposal possibilities of the stratified rocks in the Appalachian basin are considered in terms of the following: 1) gross lithology of the sequences; 2) general lithology of the rock units composing the sequences; and 3) the structural attitudes of the sequences in different parts of the basin. The degree of exploitation of economically significant mineral* resources is considered briefly where such exploitation may affect waste-disposal possibilities. Hydrologic aspects are not in general considered. Based largely on consideration of the above geologic factors the following types of reservoirs associated with particular geologic environments offer some prospects for the disposal of radioactive waste solutions. They are: 1) artificially created cavities in thick salt beds; 2) artificially fractured thin lenticular sandstone bodies isolated in shale or mudrock sequences; 3) portions of thick noncarbonate clastic sequences possessing appreciable natural porosity and permeability; 4) thin clastic units (with natural or artificially created openings) in the plate of a thrust fault overlain by impermeable strata. Considered in its entirety the Late Ordovician clastic sequence appears to have a greater number of favorable geologic factors for waste-disposal purposes than the others. The Early Silurian clastic sequence, the Silurian-Devonian carbonate sequence, and the Devonian clastic sequence offer fewer possibilities. The Late Precambrian stratified sequence, Early Cambrian, and the Cambrian-Ordovician carbonate sequence offer few possibilities. The Mississippian and Pennsylvanian sequences appear to be generally unsuitable.

Appalachian Basin↗

USGS1961

Geologic summary of the Appalachian basin, with reference to the subsurface disposal of radioactive waste solutions

The Appalachian basin is an elongate depression in the crystalline basement complex which contains a great volume of predominantly sedimentary stratified rocks. As defined in this paper it extends from the Adirondack Mountains in New York to central Alabama. From east to west it extends from the west flank of the Blue Ridge Mountains to the crest of the Findlay and Cincinnati arches and the Nashville dome. It encompasses an area of about 207,000 square miles, including all of West Virginia and parts of New York, New Jersey, Pennsylvania, Ohio, Maryland, Virginia, Kentucky, Tennessee, North Carolina, Georgia, and Alabama. The stratified rocks that occupy the basin constitute a wedge-shaped mass whose axis of greatest thickness lies close to and parallel to the east edge of the basin. The maximum thickness of stratified rocks preserved in any one part of the basin today is between 35,000 and 40,000 feet. The volume of the sedimentary rocks is approximately 510,000 cubic miles and of volcanic rocks is a few thousand cubic miles. The sedimentary rocks are predominantly Paleozoic in age, whereas the volcanic rocks are predominantly Late Precambrian. On the basis of gross lithology the stratified rocks overlying the crystalline basement complex can be divided into nine vertically sequential units, which are designated "sequences" in this report. The boundaries between contiguous sequences do not necessarily coincide with the commonly recognized boundaries between systems or series. All sequences are grossly wedge shaped, being thickest along the eastern margin of the basin and thinnest along the western margin. The lowermost unit the Late Precambrian stratified sequence is present only along part of the eastern margin of the basin, where it lies unconformably on the basement complex. It consists largely of volcanic tuffs and flows but contains some interbedded sedimentary rocks. The Late Precambrian sequence is overlain by the Early Cambrian clastic sequence. Where the older sequence is absent, the Early Cambrian sequence rests on the basement complex. Interbedded fine- to coarse-grained noncarbonate detrital rocks comprise the bulk of the sequence, but some volcanic and carbonate rocks are included. Next above is the Cambrian-Ordovician carbonate sequence which consists largely of limestone and dolomite. Some quartzose sandstone is present in the lower part in the western half of the basin, and much shale is present in the upper part in the southeast part of the basin. The next higher sequence is the Late Ordovician clastic sequence, which consists largely of shale, siltstone, and sandstone. Coarse-grained light-gray to red rocks are common in the sequence along the eastern side of the basin, whereas fine-grained dark-gray to black calcareous rocks are common along the west side. The Late Ordovician clastic sequence is overlain unconformably in many places by the Early Silurian clastic sequence. The latter comprises a relatively thin wedge of coarse-grained clastic rocks. Some of the most prolific oil- and gas-producing sandstones in the Appalachian basin are included. Among these are the "Clinton" sands of Ohio, the Medina Sandstones of New York and Pennsylvania, and the Keefer or "Big Six" Sandstone of West Virginia and Kentucky. Conformably overlying the Early Silurian clastic sequence is the Silurian-Devonian carbonate sequence, which consists predominantly of limestone and dolomite. It also contains a salt-bearing unit in the north-central part of the basin and a thick wedge of coarse-grained red beds in the northeastern part. The sequence is absent in much of the southern part of the basin. Large volumes of gas and much oil are obtained from some of its rocks, especially from the Oriskany Sandstone and the Huntersville Ghert. The Silurian-Devonian carbonate sequence is abruptly overlain by the Devonian clastic sequence a thick succession of interbedded shale, mudrock, siltstone, and sandstone. Colors range from predominantly purple and red in the northeastern part of the basin to predominantly dark gray and black in the southwestern part. Many rocks in the upper part contain hydrocarbons in commercial quantities. The next higher sequence is a heterogeneous succession that comprises most rocks of Mississippian age in the basin. It is composed largely of fine-grained to very coarse-grained noncalcareous clastic rocks in the northern half of the basin, and largely of carbonate rocks in the southern part. Large quantities of oil and gas are produced from the sequence. The youngest sequence consists of coarse-grained clastic rocks largely of Pennsylvanian age. In the center of the basin a relatively small volume of lithologically similar rocks of Permian age are included. The sequence has been intensively mined for coal throughout most of its extent. The waste-disposal possibilities of the stratified rocks in the Appalachian basin are considered in terms of the following: 1) gross lithology of the sequences; 2) general lithology of the rock units composing the sequences; and 3) the structural attitudes of the sequences in different parts of the basin. The degree of exploitation of economically significant mineral* resources is considered briefly where such exploitation may affect waste-disposal possibilities. Hydrologic aspects are not in general considered. Based largely on consideration of the above geologic factors the following types of reservoirs associated with particular geologic environments offer some prospects for the disposal of radioactive waste solutions. They are: 1) artificially created cavities in thick salt beds; 2) artificially fractured thin lenticular sandstone bodies isolated in shale or mudrock sequences; 3) portions of thick noncarbonate clastic sequences possessing appreciable natural porosity and permeability; 4) thin clastic units (with natural or artificially created openings) in the plate of a thrust fault overlain by impermeable strata. Considered in its entirety the Late Ordovician clastic sequence appears to have a greater number of favorable geologic factors for waste-disposal purposes than the others. The Early Silurian clastic sequence, the Silurian-Devonian carbonate sequence, and the Devonian clastic sequence offer fewer possibilities. The Late Precambrian stratified sequence, Early Cambrian, and the Cambrian-Ordovician carbonate sequence offer few possibilities. The Mississippian and Pennsylvanian sequences appear to be generally unsuitable.

Appalachian Basin↗

USGS2014

Description of landscape features, summary of existing hydrologic data, and identification of data gaps for the Osage Nation, northeastern Oklahoma, 1890-2012

The Osage Nation of northeastern Oklahoma, conterminous with Osage County, is characterized by gently rolling uplands and incised stream valleys that have downcut into underlying sedimentary rock units of Pennsylvanian through Permian age. Cattle ranching and petroleum and natural-gas extraction are the principal land uses in this rural area. Freshwater resources in the Osage Nation include water flowing in the Arkansas River and several smaller streams, water stored in several lakes, and groundwater contained in unconsolidated alluvial aquifers and bedrock aquifers. The Vamoosa-Ada aquifer is the primary source of fresh groundwater in this area. Fresh groundwater is underlain by saline groundwater in aquifers underlying the Osage Nation. Because of the potential for future population increases, demands for water from neighboring areas such as the Tulsa metropolitan area, and expansion of petroleum and natural-gas extraction on water resources of this area, the U.S. Geological Survey, in cooperation with the Osage Nation, summarized existing hydrologic data and identified data gaps to provide information for planning of future development of water resources in the Osage Nation. Streamflows in the Osage Nation are substantially affected by precipitation. During the relatively wet periods from the 1970s to 2000, the annual streamflows in the Osage Nation increased by as much as a factor of 2 relative to preceding decades, with subsequent decreases in streamflow of as much as 50 percent being recorded during intermittent drier years of the early 2000s. This report summarizes hydrologic data from 3 surface-water sites and 91 wells distributed across the Osage Nation. Data collected at those sites indicate that surface water in the Osage Nation generally has sufficient dissolved oxygen for survival of both coldwater and warmwater aquatic biota. Total dissolved solids concentration exceeded the secondary drinking-water standard of 500 milligrams per liter (mg/L) in up to 75 percent of the surface-water samples, indicating limited availability of potable water at some sites. Some surface-water samples collected in the Osage Nation contained dissolved chloride concentrations exceeding the secondary drinking-water standard of 250 mg/L, with greater chloride concentrations in selected basins appearing to be associated with greater densities of petroleum well locations. Several lakes sampled in the Osage Nation from 2011–12 contained sufficient chlorophyll-a concentrations to be ranked as mesotrophic to eutrophic, indicating impairment by nutrients. Relatively large dissolved phosphorus concentrations in many surface-water samples, compared to water-quality standards, indicate that eutrophication can occur in local streams and lakes. The amount of fresh groundwater stored in alluvial aquifers and the Vamoosa-Ada bedrock aquifer is adequate for domestic and other purposes in the Osage Nation at the current rate of usage. In areas where these aquifers are absent, groundwater must be pumped from minor bedrock aquifers that produce smaller volumes of water. About 30 and 60 percent of 32 and 54 water samples collected from the alluvial and Vamoosa-Ada aquifers, respectively, contained total dissolved solids concentrations larger than the secondary drinking-water standard of 500 mg/L. Local factors, such as natural seepage of brines or leakage from petroleum and natural-gas extraction activities, may cause substantial variations in dissolved chloride concentration in groundwater in the Osage Nation. Total phosphorus concentrations measured in groundwater samples were similar to dissolved phosphorus concentrations measured in the base flow of several streams. Total fresh surface-water withdrawals (use) and fresh groundwater withdrawals in the Osage Nation were estimated to have increased from 0.75 to 16.19 million gallons per day and from 0.13 to 2.39 million gallons per day, respectively, over the period from 1890 through 2010. Estimated saline-groundwater reinjection volumes at the heavily developed Burbank Oil Field in the Osage Nation from 1950 through 2012 were many times larger than the total amounts of freshwater withdrawn in this area, with estimated increases in saline-groundwater reinjection in the 2000s probably being related to increased petroleum extraction. Estimates of freshwater resources in local streams, lakes, and freshwater aquifers and of net annual precipitation indicate that less than 1 percent of freshwater resources and net annual precipitation currently is being withdrawn annually in the Osage Nation. In addition to freshwater resources, the Osage Nation may be underlain by 45,000,000 million gallons of brines, a small portion of which are withdrawn and reinjected during petroleum and natural-gas extraction. Ongoing development of desalinization technology may lead to the ability to expand use of these saline waters in the future. Several additional studies could improve understanding of the hydrologic resources of the Osage Nation. Development of computer models (simulations) of groundwater and surface-water flow for this area could enable testing of scenarios of localized and widespread effects of future climate variations and water-use changes on streamflows, lake-water levels, and groundwater levels in the Osage Nation. Installation of additional long-term streamflow and water-quality sampling stations, some with continuous water-quality monitors, could expand and improve understanding of surface-water quality. Periodic measurement of groundwater levels and sampling of water from a network of wells could provide better information about trends of groundwater quantity and quality with time. Measurement of water withdrawals at selected sites could enable more accurate estimates of water use. Lastly, better understanding of aquifer properties and spatial distribution of saline groundwater provided by geophysical surveys could improve understanding of fresh and saline groundwater resources underlying the Osage Nation.

Oklahoma↗

USGS2021

Hydrology and water quality of the Great Dismal Swamp, Virginia and North Carolina, and implications for hydrologic-management goals and strategies

The Great Dismal Swamp is a peat wetland in the Coastal Plain of southeastern Virginia and northeastern North Carolina. Timber harvesting and the construction of ditches to drain the swamp and facilitate the harvesting are collectively implicated in changes that altered the wetland forests, caused subsidence and decomposition of the peat, and increased the risk of fire. In response to these changes, managers have implemented strategies to control water levels and rewet the swamp using a network of 64 adjustable-height, water-control structures on the ditches. Rewetting the swamp is intended to re-establish the original wetland-forest types, reduce the risk of fire, reduce subsidence and decomposition of the peat, enhance peat accretion, and reduce the risk of fire. Knowledge of responses of the swamp to hydrologic controls, however, is critical to developing and implementing effective management goals and strategies. Because the 2008 South One fire reemphasized the need for this knowledge, the U.S. Geological Survey in cooperation with the U.S. Fish and Wildlife Service began studies in 2009 to identify critical hydrologic controls and responses to these controls. These studies identified water sources, topography, the two-layered hydraulic characteristics of the peat, the absence of peat in some areas, the ditch and road network, water-control structures on the ditches, the Dismal Swamp Canal and associated infrastructure, and wetland forests as the primary hydrologic controls. Precipitation is the only water source across much of the swamp. The eastward flow of streams and groundwater from the Isle of Wight Plain, across the Suffolk scarp, and into the swamp are additional water sources to the western part of the swamp. Vertical differences in the hydraulic characteristics of the peat reflect an upper peat having a high hydraulic conductivity and specific yield overlying a lower peat and sand having lower hydraulic conductivity and specific yield. The upper peat forms the main aquifer for the storage, flow, and release of water from the swamp. Maintaining water in the upper peat is critical to water availability to the wetland forests because of these properties. Groundwater flows from the swamp into the ditches and the Dismal Swamp Canal where it discharges into nearby streams. Discharge typically is to the closest ditch except where a spoil-pile road that impedes flow intervenes between the swamp and the ditch. When groundwater levels in a ditch are about 2 feet lower than levels in the other three ditches surrounding a part of the swamp, however, most groundwater typically discharges to the ditch having the lower level. This occurs even if a spoil-pile road intervenes between the swamp and the ditch having the lower level. Flow to a single ditch shifts watershed boundaries and groundwater divides toward the ditches having higher water levels and demonstrates how flow and discharge are controlled by ditch water levels. Consequently, managing water levels based on these and other hydrologic controls and responses is critical to achieving management objectives. The chemistry of water across the swamp shows the effects of the peat. Dissolved organic carbon concentrations in the groundwater are among the highest reported globally, ranging from 55 to 195 milligrams per liter. The pH of groundwater and ditch water is commonly less than 4.0 standard units because of organic acids. A relation between the pH and specific conductance of groundwater and ditch water reflects water sources, flow paths, and the chemical evolution, as waters from the different sources mix and flow along the paths.

North Carolina, Virginia↗

USGS2014

Geophysical investigations of the geologic and hydrothermal framework of the Pilgrim Springs Geothermal Area, Alaska

Pilgrim Hot Springs, located on the Seward Peninsula in west-central Alaska, is characterized by hot springs, surrounding thawed regions, and elevated lake temperatures. The area is of interest because of its potential for providing renewable energy for Nome and nearby rural communities. We performed ground and airborne geophysical investigations of the Pilgrim Springs geothermal area to identify areas indicative of high heat flow and saline geothermal fluids, and to map key structures controlling hydrothermal fluid flow. Studies included ground gravity and magnetic measurements, as well as an airborne magnetic and frequency-domain electromagnetic (EM) survey. The structural and conceptual framework developed from this study provides critical information for future development of this resource and is relevant more generally to our understanding of geothermal systems in active extensional basins. Potential field data reveal the Pilgrim area displays a complex geophysical fabric reflecting a network of intersecting fault and fracture sets ranging from inherited basement structures to Tertiary faults. Resistivity models derived from the airborne EM data reveal resistivity anomalies in the upper 100 m of the subsurface that suggest elevated temperatures and the presence of saline fluids. A northwest trending fabric across the northeastern portion of the survey area parallels structures to the east that may be related to accommodation between the two major mountain ranges south (Kigluaik) and east (Bendeleben) of Pilgrim Springs. The area from the springs southward to the range front, however, is characterized by east-west trending, range-front-parallel anomalies likely caused by late Cenozoic structures associated with north-south extension that formed the basin. The area around the springs (~10 km2 ) is coincident with a circular magnetic high punctuated by several east-west trending magnetic lows, the most prominent occurring directly over the springs. These features possibly result from hydrothermal alteration imposed by fluids migrating along intra-basin faults related to recent north-south extension. The Pilgrim River valley is characterized by a NE-elongate gravity low that reveals a basin extending to depths of ~300 m beneath Pilgrim Springs and deepening to ~800 m to the southwest. The margins of the gravity low are sharply defined by northeasttrending gradients that probably reflect the edges of fault-bounded structural blocks. The southeastern edge of the low, which lies very close to the springs, also corresponds with prominent NE-striking anomalies seen in magnetic and resistivity models. Together, these features define a structure we refer to as the Northeast Fault. The location of the hot springs appears to be related to the intersection of the Northeast Fault with a N-oriented structure marked by the abrupt western edge of a resistivity low surrounding the hot springs. While the hot springs represent the primary outflow of geothermal fluids, additional outflow extends from the springs northeast along the Northeast fault to another thaw zone that we interpret to be a secondary region of concentrated upflow of geothermal fluids. The Northeast Fault apparently controls shallow geothermal fluid flow, and may also provide an important pathway conveying deep fluids to the shallow subsurface. We suggest that geothermal fluids may derive from a reservoir residing beneath the sediment basin southwest of the springs. If so, the shape of the basin, which narrows and shallows towards the springs, may funnel fluids beneath the springs where they intersect the Northeast Fault allowing them to reach the surface. An alternative pathway for reservoir fluids to reach intermediate to shallow depths may be afforded by the main Kigluaik range front fault that coincides with a resistivity anomaly possibly resulting from fluid flow and associated hydrothermal mineralization occurring within the fault zone.

Conference Paper↗

USGS2005

Topogrid Derived 10 Meter Resolution Digital Elevation Model of Charleston, and Parts of Berkeley, Colleton, Dorchester and Georgetown Counties, South Carolina

EXPLANATION The purpose of developing a new 10m resolution digital elevation model (DEM) of the Charleston Region was to more accurately depict geologic structure, surfical geology, and landforms of the Charleston County Region. Previously, many areas northeast and southwest of Charleston were originally mapped with a 20 foot contour interval. As a result, large areas within the National Elevation Dataset (NED) depict flat terraced topography where there was a lack of higher resolution elevation data. To overcome these data voids, the new DEM is supplemented with additional elevation data and break-lines derived from aerial photography and topographic maps. The resultant DEM is stored as a raster grid at uniform 10m horizontal resolution. The elevation model contained in this publication was prodcued utilizing the ANUDEM algorthim. ANUDEM allows for the inclusion of contours, streams, rivers, lake and water body polygons as well as spot height data to control the development of the elevation model. A preliminary statistical analysis using over 788 vertical elevation check points, primarily located in the northeastern part of the study area, derived from USGS 7.5 Minute Topographic maps reveals that the final DEM, has a vertical accuracy of ?3.27 meters. A table listing the elevation comparison between the elevation check points and the final DEM is provided.

Open-File Report↗

USGS2015

Factors controlling Li concentration and isotopic composition in formation waters and host rocks of Marcellus Shale, Appalachian Basin

In this study, water and whole rock samples from hydraulically fractured wells in the Marcellus Shale (Middle Devonian), and water from conventional wells producing from Upper Devonian sandstones were analyzed for lithium concentrations and isotope ratios (δ 7 Li). The distribution of lithium concentrations in different mineral groups was determined using sequential extraction. Structurally bound Li, predominantly in clays, accounted for 75-91 wt. % of total Li, whereas exchangeable sites and carbonate cement contain negligible Li (< 3%). Up to 20% of the Li is present in the oxidizable fraction (organic matter and sulfides). The δ 7 Li values for whole rock shale in Greene Co., Pennsylvania, and Tioga Co., New York, ranged from -2.3 to + 4.3&permil;, similar to values reported for other shales in the literature. The δ 7 Li values in shale rocks with stratigraphic depth record progressive weathering of the source region; the most weathered and clay-rich strata with isotopically light Li are found closest to the top of the stratigraphic section. Diagenetic illite-smectite transition could also have partially affected the bulk Li content and isotope ratios of the Marcellus Shale. In Greene Co., southwest Pennsylvania, the Upper Devonian sandstone formation waters have δ 7 Li values of + 14.6 ± 1.2 (2SD, n = 25), and are distinct from Marcellus Shale formation waters which have δ 7 Li of + 10.0 ± 0.8 (2SD, n = 12). These two formation waters also maintain distinctive 87 Sr/ 86 Sr ratios suggesting hydrologic separation between these units. Applying temperature-dependent illitilization model to Marcellus Shale, we found that Li concentration in clay minerals increased with Li concentration in pore fluid during diagenetic illite-smectite transition. Samples from north central PA show a much smaller range in both δ 7 Li and 87 Sr/ 86 Sr than in southwest Pennsylvania. Spatial variations in Li and δ 7 Li values show that Marcellus formation waters are not homogeneous across the Appalachian Basin. Marcellus formation waters in the northeastern Pennsylvania portion of the basin show a much smaller range in both δ 7 Li and 87 Sr/ 86 Sr, suggesting long term, cross-formational fluid migration in this region. Assessing the impact of potential mixing of fresh water with deep formation water requires establishment of a geochemical and isotopic baseline in the shallow, fresh water aquifers, and site specific characterization of formation water, followed by long-term monitoring, particularly in regions of future shale gas development.

New York, Pennsylvania↗

USGS1976

Revision of Mississippian stratigraphy, eastern Idaho and northeastern Utah

New paleontologic evidence requires a revision of previous interpretations of the stratigraphy of Mississippian sequences in the Cordilleran miogeosyncline of eastern Idaho and northeastern Utah. A postulated unconformity between rocks of early Osagean age and rocks of middle Meramecian age is no longer tenable in the light of new data. The new evidence supports continuous deposition from the Lodgepole Limestone (Kinderhookian and early Osagean age) into the Little Flat Formation (early Osagean to middle Meramecian age) and its equivalents, and the interpretation of a phosphatic siltstone and shale interval in the lower part of the Little Flat Formation as a starved-basin facies.

Idaho, Utah↗

USGS2010

Seismicity of the Earth 1900-2010, Aleutian arc and vicinity

This map shows details of the Aleutian arc not visible in an earlier publication. The Aleutian arc extends about 3,000 km from the Gulf of Alaska to the Kamchatka Peninsula. It marks the region where the Pacific plate subducts into the mantle beneath the North America plate. This subduction is responsible for the generation of the Aleutian Islands and the deep offshore Aleutian Trench. Relative to a fixed North America plate, the Pacific plate is moving northwest at a rate that increases from about 55 mm per year at the arc's eastern edge to 75 mm per year near its western terminus. In the east, the convergence of the plates is nearly perpendicular to the plate boundary. However, because of the boundary's curvature, as one travels westward along the arc, the subduction becomes more and more oblique to the boundary until the relative plate motion becomes parallel to the arc at the Near Islands near its western edge. Subduction zones such as the Aleutian arc are geologically complex and produce numerous earthquakes from multiple sources. Deformation of the overriding North America plate generates shallow crustal earthquakes, whereas slip at the interface of the plates generates interplate earthquakes that extend from near the base of the trench to depths of 40 to 60 km. At greater depths, Aleutian arc earthquakes occur within the subducting Pacific plate and can reach depths of 300 km. Since 1900, six great earthquakes have occurred along the Aleutian Trench, Alaska Peninsula, and Gulf of Alaska: M8.4 1906 Rat Islands; M8.6 1938 Shumagin Islands; M8.6 1946 Unimak Island; M8.6 1957 Andreanof Islands; M9.2 1964 Prince William Sound; and M8.7 1965 Rat Islands. Several relevant tectonic elements (plate boundaries and active volcanoes) provide a context for the seismicity presented on the main map panel. The plate boundaries are most accurate along the axis of the Aleutian Trench and more diffuse or speculative in extreme northeastern Russia. The active volcanoes parallel the Aleutian Trench from the Gulf of Alaska to the Rat Islands.

Alaska↗

USGS2017

10Be dating of late Pleistocene megafloods and Cordilleran Ice Sheet retreat in the northwestern United States

During the late Pleistocene, multiple floods from drainage of glacial Lake Missoula further eroded a vast anastomosing network of bedrock channels, coulees, and cataracts, forming the Channeled Scabland of eastern Washington State (United States). However, the timing and exact pathways of these Missoula floods remain poorly constrained, thereby limiting our understanding of the evolution of this spectacular landscape. Here we report cosmogenic 10 Be ages that directly date flood and glacial features important to understanding the flood history, the evolution of the Channeled Scabland, and relationships to the Cordilleran Ice Sheet (CIS). One of the largest floods occurred at 18.2 ± 1.5 ka, flowing down the northwestern Columbia River valley prior to blockage of this route by advance of the Okanogan lobe of the CIS, which dammed glacial Lake Columbia and diverted later Missoula floods to more eastern routes through the Channeled Scabland. The Okanogan and Purcell Trench lobes of the CIS began to retreat from their maximum extent at ca. 15.5 ka, likely in response to onset of surface warming of the northeastern Pacific Ocean. Upper Grand Coulee fully opened as a flood route after 15.6 ± 1.3 ka, becoming the primary path for later Missoula floods until the last ones from glacial Lake Missoula at 14.7 ± 1.2 ka. The youngest dated flood(s) (14.0 ± 1.4 ka to 14.4 ± 1.3 ka) came down the northwestern Columbia River valley and were likely from glacial Lake Columbia, indicating that the lake persisted for a few centuries after the last Missoula flood.

Idaho, Montana, Oregon↗

USGS2013

Final report and archive of the swath bathymetry and ancillary data collected in the Puerto Rico Trench region in 2002 and 2003

In 2002 and 2003, the U.S. Geological Survey (USGS), in cooperation with the National Oceanic and Atmospheric Administration (NOAA), conducted three exploration cruises that mapped for the first time the morphology of the entire tectonic plate boundary stretching from the Dominican Republic in the west to the Lesser Antilles in the east, a distance of approximately 700 kilometers (430 miles). Observations from these three exploration cruises, coupled with computer modeling and published Global Positioning System (GPS) results and earthquake focal mechanisms, have provided new information that is changing the evaluation of the seismic and tsunami hazard from this plate boundary. The observations collected during these cruises also contributed to the basic understanding of the mechanisms that govern plate tectonics, in this case, the creation of the island of Puerto Rico and the deep trench north of it. Results of the sea floor mapping have been an important component of the study of tsunami and earthquake hazards to the northeastern Caribbean and the U.S. Atlantic coast off the United States.

Puerto Rico↗

USGS2010

Techniques for Estimating the Magnitude and Frequency of Peak Flows on Small Streams in Minnesota Based on Data through Water Year 2005

Knowledge of the peak flow of floods of a given recurrence interval is essential for regulation and planning of water resources and for design of bridges, culverts, and dams along Minnesota's rivers and streams. Statistical techniques are needed to estimate peak flow at ungaged sites because long-term streamflow records are available at relatively few places. Because of the need to have up-to-date peak-flow frequency information in order to estimate peak flows at ungaged sites, the U.S. Geological Survey (USGS) conducted a peak-flow frequency study in cooperation with the Minnesota Department of Transportation and the Minnesota Pollution Control Agency. Estimates of peak-flow magnitudes for 1.5-, 2-, 5-, 10-, 25-, 50-, 100-, and 500-year recurrence intervals are presented for 330 streamflow-gaging stations in Minnesota and adjacent areas in Iowa and South Dakota based on data through water year 2005. The peak-flow frequency information was subsequently used in regression analyses to develop equations relating peak flows for selected recurrence intervals to various basin and climatic characteristics. Two statistically derived techniques-regional regression equation and region of influence regression-can be used to estimate peak flow on ungaged streams smaller than 3,000 square miles in Minnesota. Regional regression equations were developed for selected recurrence intervals in each of six regions in Minnesota: A (northwestern), B (north central and east central), C (northeastern), D (west central and south central), E (southwestern), and F (southeastern). The regression equations can be used to estimate peak flows at ungaged sites. The region of influence regression technique dynamically selects streamflow-gaging stations with characteristics similar to a site of interest. Thus, the region of influence regression technique allows use of a potentially unique set of gaging stations for estimating peak flow at each site of interest. Two methods of selecting streamflow-gaging stations, similarity and proximity, can be used for the region of influence regression technique. The regional regression equation technique is the preferred technique as an estimate of peak flow in all six regions for ungaged sites. The region of influence regression technique is not appropriate for regions C, E, and F because the interrelations of some characteristics of those regions do not agree with the interrelations throughout the rest of the State. Both the similarity and proximity methods for the region of influence technique can be used in the other regions (A, B, and D) to provide additional estimates of peak flow. The peak-flow-frequency estimates and basin characteristics for selected streamflow-gaging stations and regional peak-flow regression equations are included in this report.

Scientific Investigations Report↗

USGS1986

Hydrogeology and ground-water quality of Lannon-Sussex area, northeastern Waukesha County, Wisconsin

The Silurian dolomite aquifer in the Lannon-Sussex area of southeastern Wisconsin is overlain by glacial deposits, but is within 8 ft of the land surface over 15% of the study area. The proximity of the dolomite aquifer to the land surface makes it susceptible to contamination from man 's activities. Water from the aquifer was analyzed and several characteristics were monitored in a 30-sq-mi area of Waukesha County, including: water temperature, calcium, magnesium, potassium, strontium, alkalinity, chlorides, fluorides, sulfates, nitrites, nitrates, nitrogen, iron, manganese, hardness, and pH. The water is hard, commonly having a hardness of more than 350 mg/L as CaCO 3 , and high in iron, commonly containing more than 0.3 mg/L. However, nutrient concentrations are not high; nitrogen, greater than 8 mg/L; phosphorus, none detected; and potassium, greater than 4 mg/L. The chloride content of the water averages more than 50 mg/L indicating contamination probably from septic systems. The water quality varies over a time. High concentrations of chloride and, occasionally, of bacteria correlate with periods of groundwater recharge over a period of 17 months. Chloride concentrations were highest in water from wells where housing density is high. An attempt was made to relate water quality changes with depth to beds of cherty dolomite that are identified in geologic logs; it was postulated that these zones might be confining beds. Although the beds appear to extend over the area, no evidence was found that they are confining beds, other than reports of a few artesian wells. Water quality, indicated by chloride content, showed no significant relation to well bottom altitudes, casing bottom altitude, or well depth.

Wisconsin↗

USGS1972

Ground-water resources of Natrona County, Wyoming

Natrona County covers an area of 5.369 square miles in central Wyoming. The climate is arid except in the mountainous areas. The county includes parts of the Great Plains, Middle Rocky Mountains, Wyoming Basin, and Southern Rocky Mountains physiographic provinces. There is wide variation of topography. More than 30 geologic formations are exposed in the county, 28 of which are known to yield water to wells and springs. The formations range in age from Precambrian to Holocene. Ground water in approximately 40 percent of the county contains more than 1.000 mg/l (milligrams per liter) of dissolved solids. Water chemically suitable for livestock can be developed at depths of less than 1,000 feet throughout most of the area. Many of the geologic formations were deposited under similar conditions and have similar water-bearing properties; also. water from these rocks deposited under similar conditions tends to have similar chemical characteristics. For this report, the stratigraphic section has been arbitrarily divided into six rock units based on similarity of deposition. The igneous and metamorphic rock unit includes rocks of Precambrian age and igneous intrusives and extrusives of Tertiary age. These rocks probably would not yield more than about 5 gpm (gallons per minute) to wells. The water is usually calcium bicarbonate type and contains less than 500 mg/l of dissolved solids. The marine rock unit includes formations of Cambrian, Mississippian, and Pennsylvanian and Permian age, having a maximum total thickness of about 1,900 feet. The Madison Limestone of Mississippian age and the Tensleep Sandstone and the Casper Formation of Pennsylvanian and Permian age supply the largest yields to wells and springs in the county. In the northeastern part of the county, flow from each of three wells in the Madison reportedly is more than 4.000 gpm. Each of three wells in the Tensleep in the same area flows more than 400 gpm. Yields of springs in the Casper Formation near Casper Mountain range from about 1.0 to 17 cubic feet per second. Ground water from near the outcrop of all these formations usually contains less than 500 rag/l of dissolved solids. The dissolved-solids content increases with distance from the outcrop and in places is more than 3.200 mg/l. Several types of water were found in this unit including sodium sulfate, calcium sodium sulfate, calcium sulfate, sodium calcium sulfate, sodium chloride, and calcium bicarbonate.

Water Supply Paper↗

USGS2002

Use of isotopes to identify sources of ground water, estimate ground-water-flow rates, and assess aquifer vulnerability in the Calumet region of northwestern Indiana and northeastern Illinois

Isotope data collected in the Calumet Region of northwestern Indiana and northeastern Illinois, one of the most heavily industrialized regions of the United States, indicated that water in the surficial Calumet aquifer is well mixed. The Calumet aquifer is recharged areally by precipitation and locally may be recharged by surface water. The residence time of ground water in the Calumet aquifer is approximately 5 to 15 years. Ground-water-flow rates through the Calumet aquifer are estimated to be 400 to 2,300 feet per year. The permeable deposits, shallow water table, lack of an overlying confining unit, and proximity to numerous contaminant sources indicate that the Calumet aquifer is vulnerable to contamination. Isotopic data indicate that ground water in the confining unit underlying the Calumet aquifer is derived from a variety of sources that include Lake Michigan, modern precipitation, and discharge from the basal Silurian-Devonian bedrock aquifer. The source and apparent age of the water are variable and appear to be affected locally by various geologic and hydraulic factors. The vertical ground-water-flow rate through the unweathered part of the confining unit is about 0.20 feet per year and is about 6.3 feet per year through the weathered part. The data indicate the weathered part of the confining unit may be more vulnerable to contamination than the unweathered confining unit. Ground water in the basal Silurian-Devonian aquifer is derived from Lake Michigan, glacial-age water, and modern precipitation. Post-1952 recharge has occurred in the vicinity of Stony Island, Ill. Ground-water recharge of the Silurian-Devonian aquifer may be occurring near Calumet Harbor. The Silurian-Devonian aquifer is vulnerable to contamination where the confining unit is thin or absent or where the integrity of the confining unit has been compromised.

Illinois, Indiana↗