SEARCH · Geology Reports

Results for “Evolution and Development”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources

USGS2024

Fault activity in the San Gabriel Mountains, southern California, USA: Insights from landscape morphometrics, erosion rates, and fault-slip rates

Many studies use landscape form to determine spatial patterns of tectonic deformation, and these are particularly effective when paired with independent measures of rock uplift and erosion. Here, we use morphometric analyses and 10 Be catchment-averaged erosion rates, together with reverse slip rates from the Sierra Madre−Cucamonga fault zone, to reveal patterns in uplift, erosion, and fault activity in the range front of the San Gabriel Mountains in southern California, USA. Our analysis tests two prevailing hypotheses: (1) the range front of the San Gabriel Mountains is at steady state, in which rock uplift balances erosion and topographic elevations are stable throughout time, and (2) that west-to-east increases in elevation, relief, erosion rate, and stream-channel steepness across the interior of the massif reflect a parallel reverse-slip rate gradient on the range-bounding Sierra Madre−Cucamonga fault zone. We show that although deviations from steady state occur, the range-front hillslopes and stream channels are typically both well-connected and adjusted to patterns in Quaternary uplift driven by motion on the range-front fault network. Accordingly, landscape morphometrics, 10 Be erosion rates, and model erosion rates effectively image spatial and temporal patterns in uplift. Interpreted jointly, these data reveal comparable peak slip rates on the Sierra Madre−Cucamonga fault zone and show that they do not monotonically increase from west to east. Thus, the eastward-increasing gradients developed within the interior of the massif are not solely related to reverse slip on the range-front faults. Evaluated on shorter length scales (<10 km), morphometric data corroborate earlier descriptions of the Sierra Madre−Cucamonga fault zone as multiple individual faults or fault sections, with slip rates tapering toward fault tips. We infer that these patterns imply the predominance of independent fault or fault section ruptures throughout the Quaternary, though data cannot rule out the possibility of large, connected Sierra Madre−Cucamonga fault zone ruptures. Deeper in the hanging wall of the Sierra Madre−Cucamonga fault zone, secondary faults accommodate range-front uplift. Motion on these faults may contribute to active uplift of the highest topography within the massif, in addition to partly reconciling differences between geologic and geodetic Sierra Madre−Cucamonga fault zone reverse-slip rates. This study provides a new, unified perspective on tectonics and landscape evolution in the San Gabriel Mountains.

California↗

USGS2005

Metallogenesis and tectonics of the Russian Far East, Alaska, and the Canadian Cordillera

The Proterozoic and Phanerozoic metallogenic and tectonic evolution of the Russian Far East, Alaska, and the Canadian Cordillera is recorded in the cratons, craton margins, and orogenic collages of the Circum-North Pacific mountain belts that separate the North Pacific from the eastern North Asian and western North American Cratons. The collages consist of tectonostratigraphic terranes and contained metallogenic belts, which are composed of fragments of igneous arcs, accretionary-wedge and subduction-zone complexes, passive continental margins, and cratons. The terranes are overlapped by continental-margin-arc and sedimentary-basin assemblages and contained metallogenic belts. The metallogenic and geologic history of terranes, overlap assemblages, cratons, and craton margins has been complicated by postaccretion dismemberment and translation during strike-slip faulting that occurred subparallel to continental margins. Seven processes overlapping in time were responsible for most of metallogenic and geologic complexities of the region (1) In the Early and Middle Proterozoic, marine sedimentary basins developed on major cratons and were the loci for ironstone (Superior Fe) deposits and sediment-hosted Cu deposits that occur along both the North Asia Craton and North American Craton Margin. (2) In the Late Proterozoic, Late Devonian, and Early Carboniferous, major periods of rifting occurred along the ancestral margins of present-day Northeast Asia and northwestern North America. The rifting resulted in fragmentation of each continent, and formation of cratonal and passive continental-margin terranes that eventually migrated and accreted to other sites along the evolving margins of the original or adjacent continents. The rifting also resulted in formation of various massive-sulfide metallogenic belts. (3) From about the late Paleozoic through the mid-Cretaceous, a succession of island arcs and contained igneous-arc-related metallogenic belts and tectonically paired subduction zones formed near continental margins. (4) From about mainly the mid-Cretaceous through the present, a succession of continental-margin igneous arcs (some extending offshore into island arcs) and contained metallogenic belts, and tectonically paired subduction zones formed along the continental margins. (5) From about the Jurassic to the present, oblique convergence and rotations caused orogen-parallel sinistral, and then dextral displacements within the plate margins of the Northeast Asian and North American Cratons. The oblique convergences and rotations resulted in the fragmentation, displacement, and duplication of formerly more continuous arcs, subduction zones, passive continental margins, and contained metallogenic belts. These fragments were subsequently accreted along the margins of the expanding continental margins. (6) From the Early Jurassic through Tertiary, movement of the upper continental plates toward subduction zones resulted in strong plate coupling and accretion of the former island arcs, subduction zones, and contained metallogenic belts to continental margins. In this region, the multiple arc accretions were accompanied and followed by crustal thickening, anatexis, metamorphism, formation of collision-related metallogenic belts, and uplift; this resulted in the substantial growth of the North Asian and North American continents. (7) In the middle and late Cenozoic, oblique to orthogonal convergence of the Pacific Plate with present-day Alaska and Northeast Asia resulted in formation of the present ring of volcanoes and contained metallogenic belts around the Circum-North Pacific. Oblique convergence between the Pacific Plate and Alaska also resulted in major dextral-slip faulting in interior and southern Alaska and along the western part of the Aleutian- Wrangell arc. Associated with dextral-slip faulting was crustal extrusion of terranes from western Alaska into the Bering Sea.

Professional Paper↗

USGS2019

Changes in genetic diversity and differentiation in Red‐cockaded woodpeckers (Dryobates borealis) over the past century

Red‐cockaded woodpeckers (RCW; Dryobates borealis ) declined after human activities reduced their fire‐maintained pine ecosystem to <3% of its historical range in the southeastern United States and degraded remaining habitat. An estimated 1.6 million RCW cooperative breeding groups declined to about 3,500 groups with no more than 10,000 birds by 1978. Management has increased RCW population abundances since they were at their lowest in the 1990s. However, no range‐wide study has been undertaken since then to investigate the impacts of this massive bottleneck or infer the effects of conservation management and recent demographic recoveries. We used mitochondrial DNA sequences (mtDNA) and nine nuclear microsatellite loci to determine if range‐wide demographic declines resulted in changes to genetic structure and diversity in RCW by comparing samples collected before 1970 (mtDNA data only), between 1992 and 1995 (mtDNA and microsatellites), and between 2010 and 2014 (mtDNA and microsatellites). We show that genetic diversity has been lost as detected by a reduction in the number of mitochondrial haplotypes. This reduction was apparent in comparisons of pre‐1970 mtDNA data with data from the 1992–1995 and 2010–2014 time points, with no change between the latter two time points in mtDNA and microsatellite analyses. The mtDNA data also revealed increases in range‐wide genetic differentiation, with a genetically panmictic population present throughout the southeastern United States in the pre‐1970s data and subsequent development of genetic structure that has remained unchanged since the 1990s. Genetic structure was also uncovered with the microsatellite data, which like the mtDNA data showed little change between the 1992–1995 and 2010–2014 data sets. Temporal haplotype networks revealed a consistent, star‐like phylogeny, suggesting that despite the overall loss of haplotypes, no phylogenetically distinct mtDNA lineages were lost when the population declined. Our results may suggest that management during the last two decades has prevented additional losses of genetic diversity.

Alabama, Arkansas, Florida, Georgia, Kentucky, Lou↗

USGS2025

Simulated soundscapes and transfer learning boost the performance of acoustic classifiers under data scarcity

1. The biodiversity crisis necessitates spatially extensive methods to monitor multiple taxonomic groups for evidence of change in response to evolving environmental conditions. Programs that combine passive acoustic monitoring and machine learning are increasingly used to meet this need. These methods require large, annotated datasets, which are time-consuming and expensive to produce, creating potential barriers to adoption in data- and funding-poor regions. Recently released pre-trained avian acoustic classification models provide opportunities to reduce the need for manual labelling and accelerate the development of new acoustic classification algorithms through transfer learning. Transfer learning is a strategy for developing algorithms under data scarcity that uses pre-trained models from related tasks to adapt to new tasks. 2. Our primary objective was to develop a transfer learning strategy using the feature embeddings of a pre-trained avian classification model to train custom acoustic classification models in data-scarce contexts. We used three annotated avian acoustic datasets to test whether transfer learning and soundscape simulation-based data augmentation could substantially reduce the annotated training data necessary to develop performant custom acoustic classifiers. We also conducted a sensitivity analysis for hyperparameter choice and model architecture. We then assessed the generalizability of our strategy to increasingly novel non-avian classification tasks. 3. With as few as two training examples per class, our soundscape simulation data augmentation approach consistently yielded new classifiers with improved performance relative to the pre-trained classification model and transfer learning classifiers trained with other augmentation approaches. Performance increases were evident for three avian test datasets, including single-class and multi-label contexts. We observed that the relative performance among our data augmentation approaches varied for the avian datasets and nearly converged for one dataset when we included more training examples. 4. We demonstrate an efficient approach to developing new acoustic classifiers leveraging open-source sound repositories and pre-trained networks to reduce manual labelling. With very few examples, our soundscape simulation approach to data augmentation yielded classifiers with performance equivalent to those trained with many more examples, showing it is possible to reduce manual label-ling while still achieving high-performance classifiers and, in turn, expanding the potential for passive acoustic monitoring to address rising biodiversity monitoring needs.

Methods in Ecology and Evolution↗

USGS2017

Benchmarking computational fluid dynamics models of lava flow simulation for hazard assessment, forecasting, and risk management

Numerical simulations of lava flow emplacement are valuable for assessing lava flow hazards, forecasting active flows, designing flow mitigation measures, interpreting past eruptions, and understanding the controls on lava flow behavior. Existing lava flow models vary in simplifying assumptions, physics, dimensionality, and the degree to which they have been validated against analytical solutions, experiments, and natural observations. In order to assess existing models and guide the development of new codes, we conduct a benchmarking study of computational fluid dynamics (CFD) models for lava flow emplacement, including VolcFlow, OpenFOAM, FLOW-3D, COMSOL, and MOLASSES. We model viscous, cooling, and solidifying flows over horizontal planes, sloping surfaces, and into topographic obstacles. We compare model results to physical observations made during well-controlled analogue and molten basalt experiments, and to analytical theory when available. Overall, the models accurately simulate viscous flow with some variability in flow thickness where flows intersect obstacles. OpenFOAM, COMSOL, and FLOW-3D can each reproduce experimental measurements of cooling viscous flows, and OpenFOAM and FLOW-3D simulations with temperature-dependent rheology match results from molten basalt experiments. We assess the goodness-of-fit of the simulation results and the computational cost. Our results guide the selection of numerical simulation codes for different applications, including inferring emplacement conditions of past lava flows, modeling the temporal evolution of ongoing flows during eruption, and probabilistic assessment of lava flow hazard prior to eruption. Finally, we outline potential experiments and desired key observational data from future flows that would extend existing benchmarking data sets.

Journal of Applied Volcanology↗

USGS2005

Sedimentology and stratigraphy of the Palisades, Lower Comanche, and Arroyo Grande areas of the Colorado River Corridor, Grand Canyon, Arizona

This report analyzes various depositional environments in three archaeologically significant areas of the Colorado River corridor in Grand Canyon. Archaeological features are built on and buried by fluvial, aeolian, and locally derived sediment, representing a complex interaction between geologic and cultural history. These analyses provide a basis for determining the potential influence of Glen Canyon Dam operations on selected archaeological sites and thus for guiding dam operations in order to facilitate preservation of cultural resources. This report presents initial results of a joint effort between geologists and archaeologists to evaluate the significance of various depositional processes and environments in the prehistoric formation and modern preservation of archaeological sites along the Colorado River corridor in Grand Canyon National Park. Stratigraphic investigations of the Palisades, Lower Comanche, and Arroyo Grande areas of Grand Canyon yield detailed information regarding the sedimentary history at these locations. Reconstruction of past depositional settings is critical to a thorough understanding of the geomorphic and stratigraphic evolution of these three archaeologically significant areas. This examination of past sedimentary environments allows the relative significance of fluvial, aeolian, debris-fan, and slope-wash sedimentary deposits to be identified at each site. In general the proportion of fluvial sediment (number and thickness of flood deposits) is shown to decrease away from the river, and locally derived sediment becomes more significant. Flood sequences often occur as 'couplets' that contain a fluvial deposit overlain by an interflood unit that reflects reworking of fluvial sediment at the land surface by wind and local runoff. Archaeological features are built on and buried by sediment of various depositional environments, implying a complex interaction between geologic and cultural history. Such field analysis, which combines geological and archaeological information and techniques, can provide a basis for future determination of the effects of Glen Canyon Dam operations on selected areas of the river corridor. This knowledge is essential to the development of preservation strategies for cultural resources in Grand Canyon.

Scientific Investigations Report↗

USGS2017

Thermal and petrologic constraints on lower crustal melt accumulation under the Salton Sea Geothermal Field

In the Salton Sea region of southern California (USA), concurrent magmatism, extension, subsidence, and sedimentation over the past 0.5 to 1.0 Ma have led to the creation of the Salton Sea Geothermal Field (SSGF)—the second largest and hottest geothermal system in the continental United States—and the small-volume rhyolite eruptions that created the Salton Buttes. In this study, we determine the flux of mantle-derived basaltic magma that would be required to produce the elevated average heat flow and sustain the magmatic roots of rhyolite volcanism observed at the surface of the Salton Sea region. We use a 2D thermal model to show that a lower-crustal, partially molten mush containing < 20 – 40 % "> <20–40% interstitial melt develops over a ∼ 10 5 "> ∼105 -yr timescale for basalt fluxes of 0.008 to 0.010 m 3 / m 2 / yr "> 0.010m3/m2/yr (∼0.0008 to ∼0.001 km / 3 yr "> /3yr injection rate) given extension rates at or below the current value of ∼0.01 m/yr ( Brothers et al., 2009 ). These regions of partial melt are a natural consequence of a thermal regime that scales with average surface heat flow in the Salton Trough, and are consistent with seismic observations. Our results indicate limited melting and assimilation of pre-existing rocks in the lower crust. Instead, we find that basalt fractionation in the lower crust produces derivative melts of andesitic to dacitic composition. Such melts are then expected to ascend and accumulate in the upper crust, where they further evolve to give rise to small-volume rhyolite eruptions (Salton Buttes) and fuel local spikes in surface heat flux as currently seen in the SSGF. Such upper crustal magma evolution, with limited assimilation of hydrothermally altered material, is required to explain the slight decrease in δ 18 O "> δ18O values of zircons (and melts) that have been measured in these rhyolites.

California↗

USGS1981

Northwest margin of California continental borderland: Marine geology and tectonic evolution

The northwest margin of the California continental borderland consists mainly of two northwest-trending pre-Neogene lithologic belts blanketed by Miocene and younger strata. These belts, which are lithologically and structurally correlated with the Franciscan Complex and Great Valley sequence of northern California, are interpreted to represent facies corresponding to the subduction complex and forearc-basin deposits of a late Mesozoic and Paleogene continental-margin arc-trench system. The outer belt, which forms the acoustic basement underlying the continental slope and Patton Ridge, is characterized by: (1) moderately high compressional velocities (5.1 to 6.2 km/sec), (2) discordant and discontinuous seismic reflectors, and (3) nonfossiliferous and diverse rock types t at range in metamorphic grade from zeolite-bearing arkosic sandstone to blueschist. Landward, the inner Great Valley sequence belt underlies Santa Rosa-Cortes Ridge and Santa Cruz and San Nicolas Basins; in contrast to the outer belt, this belt is characterized by: (1) intermediate compressional velocities (4.5 to 4.6 km/sec), (2) concordant and relatively continuous reflectors, and (3) a thick turbidite sequence of relatively undeformed and unmetamorphosed fossiliferous Cretaceous and Paleogene strata. The inner belt overlies a 6.6-km/sec layer that is probably oceanic crust, a relation consistent with the hypothesis that trapped old oceanic crust underlies the forearc basins along parts of some convergent margins. Well-developed wrench-fault structures in overlying Miocene strata record a transition from Paleogene subduction to Neogene transform faulting. Related events include widespread andesitic to dacitic volcanism and concurrent uplift and erosion of Miocene and older rocks. The proximity of these Miocene silicic volcanic rocks to the paleotrench (< 20 km) is best explained as resulting from passage of the southward-migrating Rivera ridge-fault-trench triple junction along the margin. On the basis of the age of the adjacent sea floor, passage of this triple junction occurred about 17 m.y. ago, a date that corresponds closely to the inception of volcanism and uplift in the northwest margin of the borderland. A widespread unconformity that separates highly deformed lower and lower middle iocene strata from relatively undeformed younger strata is assumed to mark the subsequent onset of wrench faulting. The timing of volcanism and uplift, and of the slightly younger wrenching event, closely matches the plate-tectonic model of Atwater and Molnar if the northwest margin of the borderland is restored to an earlier tectonic setting off Baja California, approximately 260 km southeast of its present position.

California↗

USGS2024

NEWTS1.0: Numerical model of coastal Erosion by Waves and Transgressive Scarps

Models of rocky-coast erosion help us understand the physical phenomena that control coastal morphology and evolution, infer the processes shaping coasts in remote environments, and evaluate risk from natural hazards and future climate change. Existing models, however, are highly complex, are computationally expensive, and depend on many input parameters; this limits our ability to explore planform erosion of rocky coasts over long timescales (thousands to millions of years) and over a range of conditions. In this paper, we present a simplified cellular model of coastline evolution in closed basins through uniform erosion and wave-driven erosion. Uniform erosion is modeled as a constant rate of retreat. Wave erosion is modeled as a function of fetch, the distance over which the wind blows to generate waves, and the angle between the incident wave and the shoreline. This reduced-complexity model can be used to evaluate how a detachment-limited coastal landscape reflects climate, sea-level history, material properties, and the relative influence of different erosional processes.

Geoscientific Model Development↗

USGS2021

Implementation plan for the southern Pacific Border and Sierra-Cascade Mountains provinces

Introduction The National Cooperative Geologic Mapping Program (NCGMP) is publishing a strategic plan titled Renewing the National Cooperative Geologic Mapping Program as the Nation’s Authoritative Source for Modern Geologic Knowledge (Brock and others, in press). The plan provides a vision, mission, and goals for the program during the years 2020–2030, which are: Vision .—Create an integrated, three-dimensional, digital geologic map of the United States. Mission .—Characterize, interpret, and disseminate a national geologic framework model of the Earth through geologic mapping. Goal .—Focus on geologic mapping as a core function of the U.S. Geological Survey (USGS) within the long-term vision of adequately mapping the Nation’s geologic framework in three dimensions. In order to achieve the goals outlined in the strategic plan, the NCGMP has developed an implementation plan. This plan will guide the annual review of projects carried out by USGS staff (FEDMAP) described in the plan and the development of the annual FEDMAP prospectus that will ensure the effective application of the NCGMP strategy. This publication describes the implementation plan of the NCGMP strategy for the southern Pacific Border and Sierra-Cascade Mountains provinces, as defined by Fenneman (1917, 1928, and 1946). This implementation plan focuses on the geology of California and a sliver of Nevada surrounding Lake Tahoe. The southern Pacific Border and Sierra-Cascade Mountains provinces encompass the varied landscapes of the high Sierra Nevada, the Central Valley, and Coast Ranges in northern and central California and the Peninsular Ranges, Continental Borderland, Los Angeles Basin-San Gabriel-San Bernardino valleys, western and central Transverse Ranges, and northernmost Salton Trough in southern California. Societal demands create a need for earth-science data in each of these landscapes. The broader San Francisco Bay area, Central Valley, Los Angeles-San Gabriel-San Bernardino lowlands, and the coastal lowlands that border the Peninsular Ranges are densely populated (about 30 million people) areas at high risk of natural hazards. The mountains of the Sierra Nevada, Peninsular Ranges, and Transverse Ranges, and the coast all provide numerous recreational opportunities that attract visitors from around the world, whereas previously these ranges attracted people to mine their resources. The agricultural capacity of the Central Valley is a critical resource for the Nation that is increasingly water limited. The southern. Pacific Border and Sierra-Cascade Mountains provinces, at the edge of the North American continent, were profoundly influenced by subduction zone tectonics during the Mesozoic and early Cenozoic (ongoing in northernmost California) and subsequently by the inception, development, and present activity of the San Andreas transform margin system. Although the geology of this region is the poster child of fundamental conceptual models of subduction zone complexes, forearc basins, ophiolite obductions, magmatic arcs, and suspect terranes, as well as hosting one of Earth’s most notorious continental transform faults—the San Andreas Fault—important questions that have important societal consequences remain to be answered. Most of California’s population reside in these provinces and live within 30 miles of an active fault (according to www.earthquakeauthority.com ) yet new faults continue to be discovered, highlighting the importance of deformation off the main San Andreas Fault. Bedrock, surficial, and three-dimensional (3D) geologic maps depicting stratigraphic structure and depth to crystalline basement rocks provide critical context and information for understanding fault rupture, distributed deformation, fault connectivity, and history in addition to providing crucial data that enable forecasting of shaking amplitude and length from hypothetical earthquake scenarios. The tectonic evolution of California produced not only stunning mountains, with associated hazards from landslides and active volcanoes, but also fertile valleys that make California the top agricultural producer in the country in terms of cash receipts (according to www.ers.usda.gov/faqs ). These valleys lie atop large basins that not only store groundwater but, in many cases, host oil and gas fields, contributing to the fourth highest hydrocarbon production by State in the country in 2016 (according to https://www.aei.org/carpe-diem/animated-chart-of-us-oil-production-by-state-1981-2017 ). Water is a key resource increasingly stressed by growing agricultural, industrial, and residential needs. Warmer and drier conditions have led to an increased reliance on extracting groundwater resources, whose availability and quality are dictated at the first order by the 3D spatial distribution of bedrock and Quaternary surficial deposits. Thus, assessment of this critical resource is inextricably tied to knowledge of the surficial and subsurface geologic structure and material types.

California, Nevada↗

USGS2021

Near real-time updating of pager loss estimates

Initial alerts by PAGER (Prompt Assessment of Global Earthquakes for Response) within minutes following an earthquake include several uncertainties, mainly due to potential inaccuracies in location, depth, fault delineation, and shaking estimates. We enhance an updating framework by incorporating early reports of fatalities within the first 24 hours, or so, of an earthquake to update PAGER’s overall fatality estimates and its resulting alert level. Though initial loss reports by officials or the media are uncertain and often undercount the eventual reported impacts, their temporal evolution provides predictive constraints for the PAGER model. The proposed framework helps capture these in a systematic way to minimize potential large fluctuations in PAGER alerts as ShakeMap (the USGS product which estimates how an area is affected by an earthquake) gets updated in the early hours after an earthquake. The new framework also accounts for uncertainties associated with early fatality reports as well as PAGER model-related uncertainties in order to improve the overall impact forecast. This updating framework improves the loss estimate and alert level to the correct level within the first 24 hours even when the initial estimation from PAGER is assumed to be off by two levels of alert, which is plausible due to potential over- or under-estimation of the PAGER model. While test results are very encouraging, our future work aims at implementation of operational PAGER model updating, which entails additional challenges in acquiring useful data, estimating their credibility, and developing rigorously tested operational code and protocols

Conference Paper↗

USGS2007

The geophysical character of southern Alaska - Implications for crustal evolution

The southern Alaska continental margin has undergone a long and complicated history of plate convergence, subduction, accretion, and margin-parallel displacements. The crustal character of this continental margin is discernible through combined analysis of aeromagnetic and gravity data with key constraints from previous seismic interpretation. Regional magnetic data are particularly useful in defining broad geophysical domains. One of these domains, the south Alaska magnetic high, is the focus of this study. It is an intense and continuous magnetic high up to 200 km wide and &sim;1500 km long extending from the Canadian border in the Wrangell Mountains west and southwest through Cook Inlet to the Bering Sea shelf. Crustal thickness beneath the south Alaska magnetic high is commonly 40–50 km. Gravity analysis indicates that the south Alaska magnetic high crust is dense. The south Alaska magnetic high spatially coincides with the Peninsular and Wrangellia terranes. The thick, dense, and magnetic character of this domain requires significant amounts of mafic rocks at intermediate to deep crustal levels. In Wrangellia these mafic rocks are likely to have been emplaced during Middle and (or) Late Triassic Nikolai Greenstone volcanism. In the Peninsular terrane, the most extensive period of mafic magmatism now known was associated with the Early Jurassic Talkeetna Formation volcanic arc. Thus the thick, dense, and magnetic character of the south Alaska magnetic high crust apparently developed as the response to mafic magmatism in both extensional (Wrangellia) and subduction-related arc (Peninsular terrane) settings. The south Alaska magnetic high is therefore a composite crustal feature. At least in Wrangellia, the crust was probably of average thickness (30 km) or greater prior to Triassic mafic magmatism. Up to 20 km (40%) of its present thickness may be due to the addition of Triassic mafic magmas. Throughout the south Alaska magnetic high, significant crustal growth was caused by the addition of mafic magmas at intermediate to deep crustal levels.

Special Paper of the Geological Society of America↗

USGS2015

PHT3D-UZF: A reactive transport model for variably-saturated porous media

A modified version of the MODFLOW/MT3DMS-based reactive transport model PHT3D was developed to extend current reactive transport capabilities to the variably-saturated component of the subsurface system and incorporate diffusive reactive transport of gaseous species. Referred to as PHT3D-UZF, this code incorporates flux terms calculated by MODFLOW's unsaturated-zone flow (UZF1) package. A volume-averaged approach similar to the method used in UZF-MT3DMS was adopted. The PHREEQC-based computation of chemical processes within PHT3D-UZF in combination with the analytical solution method of UZF1 allows for comprehensive reactive transport investigations (i.e., biogeochemical transformations) that jointly involve saturated and unsaturated zone processes. Intended for regional-scale applications, UZF1 simulates downward-only flux within the unsaturated zone. The model was tested by comparing simulation results with those of existing numerical models. The comparison was performed for several benchmark problems that cover a range of important hydrological and reactive transport processes. A 2D simulation scenario was defined to illustrate the geochemical evolution following dewatering in a sandy acid sulfate soil environment. Other potential applications include the simulation of biogeochemical processes in variably-saturated systems that track the transport and fate of agricultural pollutants, nutrients, natural and xenobiotic organic compounds and micropollutants such as pharmaceuticals, as well as the evolution of isotope patterns.

Ground Water↗

USGS2006

A specter of coexistence: Is centrifugal community organization haunted by the ghost of competition?

In a centrifugally organized community species prefer the same habitat (called "core") but differ in their secondary habitat preferences. The first model of centrifugal community organization (CCO) predicted that optimally foraging, symmetrically competing species would share use of the core habitat at all density combinations. But one might also assume that the competition in the core habitat is asymmetrical, that is, that one of the species (the dominant) has a behavioral advantage therein. In this study, we asked how should habitat use evolve in a centrifugally organized community if its species compete asymmetrically in the core habitat? To address this question we developed an "isoleg model". The model predicts that in a centrifugally organized community, asymmetric competition promotes the use of the core habitat exclusively by the dominant species at most points in the state space. The separation of the core habitat use by the species ("the ghost of competition past") may be either complete or partial ("partial ghost"), and behavior at the stable competitive equilibrium between the species could determine whether coexistence should occur at the "complete-" or the "partial ghost" regions. This version of CCO should be a common feature of competitive systems.

Israel Journal of Ecology and Evolution↗

USGS2020

The transformative impact of genomics on sage-grouse conservation and management

For over two decades, genetic studies have been used to assist in the conservation and management of both Greater Sage-grouse ( Centrocercus urophasianus ) and Gunnison Sage-grouse ( C. minimus ), addressing a wide variety of topics including taxonomy, parentage, population connectivity, and demography. The field of conservation genetics has been transformed by dramatic improvements in sequencing technology, facilitating genomic studies in many wildlife species. The quality and amount of data generated by genomic methods vastly exceed that of traditional genetic studies, allowing for increased precision in estimating genetic parameters of interest. Perhaps more importantly, genomic methods can provide insight into non-neutral evolution such as adaptive divergence. Here we recount the shift from genetic to genomic methods using two wildlife species of substantial conservation interest, focusing on the improved capabilities and advantages of genomic methods. For instance, reassessment of divergence in sage-grouse using genomic methods confirmed strong differentiation between the two species and revealed that a small population in the state of Washington was more genetically distinct than previously recognized. Further, new genomic resources and approaches have been used to identify a family of genes linked to local dietary adaptation suggesting that sage-grouse may possess digestive and metabolic adaptations that mitigate the effects of consuming plant secondary metabolites like those found in sagebrush. Genetic variation among populations in these gene regions is thought to be involved with local dietary adaptations, and therefore maintaining the tie between sage-grouse and the chemistry of local sagebrush may be an important management consideration. We posit that the integration of newly developed genomic resources combined with the vast wealth of ecological and behavioral data for sage-grouse has the potential to shed light on mechanistic relationships that ultimately are vital to the conservation and management of these species.

Book chapter↗

USGS2014

Estimating the spatial distribution of wintering little brown bat populations in the eastern United States

Depicting the spatial distribution of wildlife species is an important first step in developing management and conservation programs for particular species. Accurate representation of a species distribution is important for predicting the effects of climate change, land-use change, management activities, disease, and other landscape-level processes on wildlife populations. We developed models to estimate the spatial distribution of little brown bat ( Myotis lucifugus ) wintering populations in the United States east of the 100th meridian, based on known hibernacula locations. From this data, we developed several scenarios of wintering population counts per county that incorporated uncertainty in the spatial distribution of the hibernacula as well as uncertainty in the size of the current little brown bat population. We assessed the variability in our results resulting from effects of uncertainty. Despite considerable uncertainty in the known locations of overwintering little brown bats in the eastern United States, we believe that models accurately depicting the effects of the uncertainty are useful for making management decisions as these models are a coherent organization of the best available information.

Ecology and Evolution↗

USGS1994

The Nd-, Sr- and Pb-isotopic character of lavas from Taal, Laguna de Bay and Arayat volcanoes, southwestern Luzon, Philippines: Implications for arc magma petrogenesis

Following the amalgamation of a collage of pre-Neogene terranes largely by strike-slip and convergence mechanisms to form the Philippine islands, volcanic chains, related to oppositely dipping subduction zones, developed along the eastern and western margins of the archipelago. There is ample field evidence that this volcanic activity, predominantly calc-alkaline in chemical character, had commenced by the Oligocene. Volcanoes resulting from subduction along the Manila-Negros trench in the west (e.g. Taal, Laguna de Bay and Arayat) form a high-angle linear array, trending away from the MORE field on Pb-isotopic covariation diagrams; have the highest Sr- and lowest Nd-isotopic compositions, of the two chains (but nevertheless plotting above bulk earth on the 87 Sr/ 86 Sr versus 143 Nd/ 144 Nd covariation diagram); and exhibit Sm/Nd and Rb/Sr values that are lower and higher, respectively, than the estimated values for bulk earth. While the Sm/Nd and Rb/Sr characteristics are common to both chains, volcanoes associated with the Philippine-East Luzon trench have Pb-isotopic compositions that fall in the Indian Ocean MORB field and that require time-integrated evolution in a high Th/U environment. They also have higher Nd- and lower Sr-isotopic ratios. The source materials of Philippine volcanoes, therefore, have undergone varied recent enrichments in LILE, as indicated by the decoupling of isotopic and elemental ratios. These enrichments, particularly for the western volcanoes, cannot be entirely due to small degrees of partial melting in the mantle wedge, considering that they were accompanied by elevations in radiogenic Pb. Elevated Pb ratios are best explained by the introduction of subducted, continentally derived sediments. The sedimentary component in the western volcanoes is probably the South China Sea sediments derived largely from Eurasia. That this component is not available in the Philippine-East Luzon trench is reflected by the fact that the eastern volcanoes have higher Nd- and lower Sr-isotopic ratios as well as less radiogenic common Pb.

southwestern Luzon↗

USGS2015

Near-surface stratigraphy and morphology, Mississippi Inner Shelf, northern Gulf of Mexico

Over the past decade, the Mississippi Barrier Islands have been the focus of a comprehensive geologic investigation by the U.S. Geological Survey (USGS), in collaboration with the U.S. Army Corps of Engineers (USACE) and the National Park Service (NPS). The islands (Dauphin, Petite Bois, Horn, East Ship, West Ship, and Cat) are part of the Gulf Islands National Seashore (GUIS), and provide a diverse ecological habitat, protect the mainland from storm waves, and help maintain estuarine conditions within Mississippi Sound. Over the past century, the islands have been in a state of decline with respect to elevation and land-area loss. In 2005, the islands were severely impacted by Hurricane Katrina, which inundated them with a storm surge of 8 meters, causing severe shoreface erosion and widening breaches in Dauphin, West Ship, and Cat Islands. To evaluate the impact and fate of the islands, understanding their evolution and resiliency became a priority for the USGS under the Northern Gulf of Mexico Ecosystem Change and Hazard Susceptibility Project. The project formed the basis for collaboration with the USACE Mississippi Coastal Improvement Project, which is intended to restore portions of coastal Mississippi and GUIS affected by storm impact. Since then, many studies have contributed to our understanding of the islands’ morphology and nearshore stratigraphy. This report expands upon the nearshore component to provide a stratigraphic and morphologic assessment offshore of Petit Bois Island. In June 2013, as part of the MsCIP project, the USGS conducted a geophysical survey consisting of about 650 line-kilometers (km), encompassing an area of approximately 212 square kilometers (km 2 ). The survey area extended from 1 to 13 km offshore of Petite Bois Island. The geophysical investigation included interferometric swath bathymetry, sidescan sonar, and chirp subbottom profiling. The intent of the survey was to provide geologic information that would assist the USACE in developing a sediment sampling strategy for identifying deposits suitable for shoreline restoration operations. The data from the geophysical survey would also further our understanding of the geologic framework along the inner shelf. Numerous seafloor and subbottom features were identified. At the surface, shoals and shelf sand sheets of various sizes and orientations are the predominant morphology. In the subsurface, Holocene- and Pleistocene-age features include marine transgressive deposits infilling older fluvia distributary systems. These interpretations from the geophysical research were integrated with sediment cores collected by the USGS and USACE to provide textural and volumetric information.

Mississippi-Alabama shelf↗