Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources

Geohydrology and ground-water resources of Philadelphia, Pennsylvania

The aquifers underlying the 134.6-square-mile city of Philadelphia are divided by the Fall Line into the unconsolidated aquifers (chiefly sand and gravel) of the Coastal Plain and the consolidated-rock aquifers (chiefly schist of the Wissahickon Formation) of the Piedmont. Ground water is present under confined and unconfined conditions. The principal units of the confined-aquifer system are the lower and middle sands of the Potomac-Raritan-Magothy aquifer system. The lower sand unit is the most productive aquifer in Philadelphia. The median yield of wells screened in the lower sand unit is 275 gal/min (gallons per minute), and yields of some wells are as high as 1,350 gal/min. The median specific capacity is 16 (gal/min)/ft (gallons per minute per foot of drawdown). The principal units of the unconsolidated unconfined-aquifer system are the upper sand unit of the Potomac-Raritan-Magothy aquifer system and the informally named Trenton gravel. The median yield of wells tapping these two undifferentiated units is 90 gal/min, and yields of some wells are as high as 1,370 gal/min. The median specific capacity is 12 (gal/min)/ft. The consolidated unconfined-aquifer system consists mainly of the Wissahickon Formation. The median yield of nondomestic wells that tap the Wissahickon Formation is 45 gal/min, and yields are as high as 350 gal/min. The median specific capacity is 0.5 (gal/min)/ft. Urbanization has considerably modified the hydrologic cycle in Philadelphia. Impervious surfaces have reduced recharge areas and evapotranspiration and have increased direct runoff. Leakage from the water-distribution system, which is supplied from the Delaware and Schuylkill Rivers, was about 60 to 72 Mgal/d (million gallons per day) in 1980. Groundwater infiltration to sewers is estimated to be as much as 135 Mgal/d when the water table is high. The potentiometric surface of the lower sand unit has been lowered substantially by pumping. By 1954, cones of depression were more than 50 ft (feet) below sea level at the U.S. Naval Base and more than 70 ft below sea level along the Delaware River northeast of the naval base. As a result of withdrawals, declining heads in the lower sand unit caused water to flow downward from the overlying unconsolidated deposits and the water table to decline below sea level along the Delaware River. Beginning in the mid1960's, ground-water withdrawals from the lower sand unit decreased, and, by 1979, water levels had risen 25 ft at the U.S. Naval Base and 45 ft farther north along the Delaware River. As of 1985, water levels in the lower sand unit were controlled largely by pumping in nearby parts of New Jersey. Urbanization also has caused substantial degradation of the quality of ground water in Philadelphia. By 1945, the quality of water in the unconfined aquifer system began to deteriorate as contaminants present at the land surface migrated down- ward. Withdrawal of water from the deeper confined aquifers caused a head decline that resulted in downward movement of contaminated water from the overlying unconfined aquifer system. Consequently, water in the confined aquifers deteriorated progressively in chemical quality so it resembles water in the unconfined aquifer system. The concentration of dissolved solids in water samples collected during 1979-80 ranged from 90 to 4,480 mg/L (milligrams per liter). The average concentration of 778 mg/L was 45 percent higher than that of samples collected during 1945-58. Water from the unconfined unconsolidated aquifers generally had the highest dissolved-solids concentration. The concentration of dissolved iron in water samples collected during 197980 ranged from 0 to 220 mg/L and exceeded 0.30 mg/L in 71 percent of the samples. The average concentration of 17 mg/L was nearly 30 percent higher than that of samples collected during 1945-58. Many wells have been abandoned because of elevated iron concentrations. The concentration of dissolved manganese in water

Water Supply Paper↗

Characterizing the hydrogeologic framework of the Death Valley region, Southern Nevada and California

Three-dimensional (3-D) hydrogeologic modeling of the complex geology of the Death Valley region requires the application of a number of Geoscientific Information System (GSIS) techniques. This study, funded by United States Department of Energy as a part of the Yucca Mountain Project, focuses on an area of approximately 100,000 square kilometers (three degrees of latitude by three degrees of longitude) and extends up to ten kilometers in depth. The geologic conditions are typical of the Basin and Range province; a variety of sedimentary and igneous intrusive and extrusive rocks have been subjected to both compressional and extensional deformation. GSIS techniques allow the synthesis of geologic, hydrologic and climatic information gathered from many sources, including satellite imagery and published maps and cross-sections. Construction of a 3-D hydrogeological model is possible with the combined use of software products available from several vendors, including traditional GIS products and sophisticated contouring, interpolation, visualization, and numerical modeling packages.

Conference Paper↗

National Park Service vegetation inventory program: Mississippi National River and Recreation Area, Minnesota

The Mississippi National River and Recreation Area (MISS) vegetation mapping project is an initiative of the National Park Service (NPS) Vegetation Inventory Program (VIP) to classify and map vegetation types of MISS. (Note: “MISS” is also referred to as “park” throughout this report.) The goals of the project are to adequately describe and map vegetation types of the park and to provide the NPS Natural Resource Inventory and Monitoring (I&M) Program, resource managers, and biological researchers with useful baseline vegetation information. The MISS vegetation mapping project was officially started in spring 2012, with a scoping meeting wherein partners discussed project objectives, goals, and methods. Major collaborators at this meeting included staff from the NPS MISS, the NPS Great Lakes Network (GLKN), NatureServe, and the USGS Upper Midwest Environmental Sciences Center. The Minnesota Department of Natural Resources (DNR) was also in attendance. Common to all NPS VIP projects, the three main components of the MISS vegetation mapping project are as follows: (1) vegetation classification, (2) vegetation mapping, and (3) map accuracy assessment (AA). In this report, each of these fundamental components is discussed in detail. With the completion of the MISS vegetation mapping project, all nine park units within the NPS GLKN have received vegetation classification and mapping products from the NPS and USGS vegetation programs. Voyageurs National Park and Isle Royale National Park were completed during 1996–2001 (as program pilot projects) and another six park units were completed during 2004–11, including the Apostle Islands National Lakeshore, Grand Portage National Monument, Indiana Dunes National Lakeshore, Pictured Rocks National Lakeshore, Saint Croix National Scenic Riverway, and Sleeping Bear Dunes National Lakeshore.

Natural Resource Report↗

Hyperspectral analysis of the ultramafic complex and adjacent lithologies at Mordor, NT, Australia

The Mordor Complex consists of a series of potassic ultramafic rocks which were intruded into Proterozoic felsic gneisses and amphibolite and are overlain by quartzite and unconsolidated deposits. In situ and laboratory 0.4 to 2.5 ??m reflectance spectra show Al-OH absorption features caused by absorption in muscovite, kaolinite, and illite/smectite in syenite, granitic gneiss, quartzite and unconsolidated sedimentary deposits, and Fe,Mg-OH features due to phlogopite, biotite, epidote, and hornblende in the mafic and ultramafic rocks. Ferrous-iron absorption positioned near 1.05 ??m is most intense in peridotite reflectance spectra. Ferric-iron absorption is intense in most of the felsic lithologies. HyMap data were recorded in 126 narrow bands from 0.43 to 2.5 ??m along a 7-km-wide swath with approximately 6-m spatial resolution. Correction of the data to spectral reflectance was accomplished by reference to in situ measurements of an extensive, alluvial plain. Spectral classes for matched filter processing were selected by using the pixel purity index procedure and analysis of in situ and laboratory spectra. Considering the spatial distribution of the resulting 14 classes, some classes were combined, which produced eight classes characterized by Al-OH absorption features, and three Fe,Mg-OH absorption-feature classes. Comparison of the distribution of these 11 spectral classes to a generalized lithologic map of the study area shows that the spectral distinction among the eight Al-OH classes is related to variations in primary lithology, weathering products, and vegetation density. Quartzite is represented in three classes, syenite corresponds to a single scattered class, quartz-muscovite-biotite schist defines a single very coherent class, and unconsolidated sediments are portrayed in four classes. The three mafic-ultramafic classes are distinguished on the basis of generally intense Fe,Mg-OH and ferrous-iron absorption features. A single class represents the main Mordor ultramafic mass. Epidote-bearing rocks define another class, which corresponds to biotite gneiss and, in the southern part of the area, to fracture zones. The third class, which exhibits Al-OH, as well as Fe,Mg-OH features, represents hornblende gneiss and other mafic gneisses. These results indicate the importance of analyzing the VNIR and SWIR spectral shape and albedo, as well as analyzing specific spectral features, for mapping lithologic units in this weathered terrain. ?? 2004 Elsevier Inc. All rights reserved.

Remote Sensing of Environment↗

Breeding phenology and reproductive success of the Brandt's Cormorant at three nearshore colonies in central California, 1997-2001

Brandt's Cormorant ( Phalacrocorax penicillatus ) breeding effort, phenology and success were studied in 1997-2001 at three colonies spanning approximately 200 km of the central California coast: Point Reyes (PR); Devil's Slide Rock and Mainland (DS); and Castle-Hurricane Colony Complex (CH). Breeding effort was reduced at all three colonies in the 1998 El Niño event. Mean clutch initiation dates differed significantly among colonies, with cormorants at the southernmost colony (CH) laying earliest, and those at the northernmost colony (PR) laying latest. Productivity at individual colonies varied greatly among years (range 0.7-2.5 fledglings per pair). Overall colony means were lowest (1.6 fledglings/pair) during the 1998 El Niño event and highest (2.5 fledglings/pair) in the 1999 La Niña event. Productivity at CH (1.7 fledglings/pair) was significantly lower than at PR (2.2 fledglings/pair), and interannual variation was greatest at CH. Late-nesting birds laid fewer eggs, hatched fewer chicks, and fledged fewer chicks per pair than early-nesters. The rapid rate of growth at some nearshore colonies in central California suggests immigration from elsewhere, most likely the large offshore colony at the South Farallon Islands. Variation in timing of breeding and reproductive success among colonies demonstrates a value in maintaining multiple study locations when assessing Brandt's Cormorant population parameters in the California Current System.

Waterbirds↗

Geologic age: using radioactive decay to determine geologic age

At the close of the 18th century, the haze of fantasy and mysticism that tended to obscure the true nature of the Earth was being swept away. Careful studies by scientists showed that rocks had diverse origins. Some rock layers, containing clearly identifiable fossil remains of fish and other forms of aquatic animal and plant life, originally formed in the ocean. Other layers, consisting of sand grains winnowed clean by the pounding surf, obviously formed as beach deposits that marked the shorelines of ancient seas. Certain layers are in the form of sand bars and gravel banks -- rock debris spread over the land by streams. Some rocks were once lava flows or beds of cinders and ash thrown out of ancient volcanoes; others are portions of large masses of once-molten rock that cooled very slowly far beneath the Earth's surface. Other rocks were so transformed by heat and pressure during the heaving and buckling of the Earth's crust in periods of mountain building that their original features were obliterated.

General Information Product↗

Geology and mineral deposits of Churchill County, Nevada

Churchill County, in west-central Nevada, is an area of varied topography and geology that has had a rather small total mineral production. The western part of the county is dominated by the broad low valley of the Carson Sink, which is underlain by deposits of Lake Lahontan. The bordering mountain ranges to the west and south are of low relief and underlain largely by Tertiary volcanic and sedimentary units. Pre-Tertiary rocks are extensively exposed east of the Carson Sink in the Stillwater Range, Clan Alpine Mountains, Augusta Mountains, and New Pass Mountains. The eastern valleys are underlain by Quaternary alluvial and lacustrine deposits contemporaneous with the western deposits of Lake Lahontan. The eastern mountain ranges are more rugged than the western ranges and have higher relief; the eastern valleys are generally narrower.

Nevada↗

Geochemical and mineralogical characteristics of REE in granite-derived regolith: a model for the Southeast United States

Rare earth element (REE) ion-adsorption clay deposits are of global economic importance because they currently supply a significant portion of the world’s annual production of both light (LREE) and heavy REE (HREE). There is considerable ambiguity regarding the origin of this deposit type: The main criteria include the presence of large, generally granitic, igneous suites; long periods of intense weathering with little subsequent erosion; and evidence for mobility of REE within the regolith. Granitic rocks of the southeastern United States have been subjected to a long history of chemical weathering, comparable to that of South China, an area which contains many REE clay deposits. Detailed comparisons of weathered bedrock-soil profiles for large masses of granitic rocks as exemplified by the Stewartsville, Striped Rock, and Liberty Hill plutons, USA, indicate that REE are mobile within many regolith profiles and locally can attain grades comparable to mined deposits of South China. Primary accessory mineralogy, modal content, and element redistribution as a result of weathering are identified as distinguishing factors in mobility-related enrichment of REE in the regolith profiles. Only limited geochemical separation of REE was observed within profiles, which suggests the importance of source rock composition and mineralogy in the initial distribution of extractable REE in the regolith. Retention of extractable HREE was favored over LREE, Th and U within most of the studied profiles.

Conference Paper↗

Alamo megabreccia: Record of a late devonian impact in southern Nevada

The Alamo breccia is probably the most voluminous known outcropping carbonate megabreccia. It occupies ~4000 km2 across 11 mountain ranges in southern Nevada, has an average thickness of ~70 m, and contains a volume of 250+ km3. The breccia is a single bed, of early Frasnian (early Late Devonian) age, that formed in the wake of a giant slide that deposited a lower chaotic debrite, containing clasts as large as 80 × 500 m, and an upper exquisitely graded turbidite. It is anomalously intercalated with cyclic shallow-water platform carbonates of the Guilmette Formation. The Alamo breccia is interpreted as a product of the Alamo event, a nearby marine impact of an extraterrestrial object, whereby impact-generated crustal shock waves and/or marine superwaves detached the upper ~60 m of platform along a horizontal surface. Loosened bedrock slid seaward across the platform, and some of it accumulated as the lower debrite. Rock-water exchange induced landward-propagated tsunami(s), whose uprush and/or backwash deposited the upper turbidite, partly above sea level. Evidence for impact includes shockedquartz grains, an iridium anomaly, and reworked conodonts, all found only within the breccia. Because the Alamo breccia is not known outside of Nevada, and because the early Frasnian time of the Alamo event is not noted for accelerated extinctions, being ~3 m.y. before the Frasnian-Famennian impact(s) and biotic crisis, the impact was probably only of moderate size.

Nevada↗

Mount St. Helens: Controlled-source audio-frequency magnetotelluric (CSAMT) data and inversions

This report describes a series of geoelectrical soundings carried out on and near Mount St. Helens volcano, Washington, in 2010–2011. These soundings used a controlled-source audio-frequency magnetotelluric (CSAMT) approach (Zonge and Hughes, 1991; Simpson and Bahr, 2005). We chose CSAMT for logistical reasons: It can be deployed by helicopter, has an effective depth of penetration of as much as 1 kilometer, and requires less wire than a Schlumberger sounding. This Data Series provides the edited data for these CSAMT soundings as well as several different types of 1-D inversions (where the signal data are converted to conductivity-versus-depth models). In addition, we include a map showing station locations on and around the volcano and the Pumice Plain to the north. The apparent conductivity (or its inverse, apparent resistivity) measured by a geoelectrical system is caused by several factors. The most important of these are water-filled rock porosity and the presence of water-filled fractures; however, rock type and minerals (for instance, sulfides and clay content) also contribute to apparent conductivity. In situations with little recharge (for instance, in arid regions), variations in ionic content of water occupying pore space and fractures sampled by the measurement system must also be factored in (Wynn, 2006). Variations in ionic content may also be present in hydrothermal fluids surrounding volcanoes in wet regions. In unusual cases, temperature may also affect apparent conductivity (Keller, 1989; Palacky, 1989). There is relatively little hydrothermal alteration (and thus fewer clay minerals that might add to the apparent conductivity) in the eruptive products of Mount St. Helens (Reid and others, 2010), so conductors observed in the Fischer, Occam, and Marquardt inversion results later in this report are thus believed to map zones with significant water content. Geoelectrical surveys thus have the potential to reveal subsurface regions with significant groundwater content, including perched and regional aquifers. Reid and others (2001) and Reid (2004) have suggested that groundwater involvement may figure in both the scale and the character of some if not all volcanic edifice collapse events. Ongoing research by the U.S. Geological Survey (USGS) and others aims to better understand the contribution of groundwater to both edifice pore pressure and rock alteration as well as its direct influence on eruption processes by violent interaction with magma (Schmincke, 1998).

Washington↗

Reconnaissance study of the major and trace element content of bauxite deposits in the Arkansas bauxite region, Saline and Pulaski Counties, central Arkansas

The Arkansas bauxite district, which comprises about 275 square miles (710 square kilometers) of central Arkansas, produced an order of magnitude more bauxite and alumina than the other bauxite districts in the United States combined. Bauxite was mined in the region continuously from 1898 to 1982. These bauxites are laterite deposits, formed from intensive in-place weathering of the exposed surface of the Granite Mountain pluton, a Late Cretaceous batholith composed mainly of nepheline syenite and lesser amounts of syenite. Nepheline syenite was the aluminum source for the bauxite and clay deposits that blanket the pluton. The early Eocene continental sedimentary rocks that contain and overlie the bauxite deposits indicate that central Arkansas had a warm tropical environment during bauxite formation. Bauxite ores are the principal sources of aluminum. Some of the global bauxite deposits have been found to contain co-occurring metals that have essential applications in modern technologies. For example, bauxite is the largest global source of gallium (Ga), used in semiconductors, which is recovered as a byproduct of processing bauxite to recover alumina. Other critical metal commodities within some bauxites that reportedly have potential for byproduct recovery include niobium (Nb), scandium (Sc), and rare earth elements (REEs). Currently (2021), the United States is wholly dependent on imports for its supplies of bauxite for processing to produce alumina. The United States is also dependent on foreign sources of gallium, niobium, and scandium, as well for most of its domestic requirements of REEs. For these reasons, samples were collected from Arkansas bauxite deposits, associated clays, mill residue wastes (respectively referred to as red muds and black sands), and the parent nepheline syenite to determine their elemental content, with a particular focus on gallium, niobium, scandium, and REEs. Each sample was analyzed for 60 elements; these data and the methods used are published as a U.S. Geological Survey data release. The results indicate that, of the critical metals in bauxites, gallium is a potential byproduct from the central Arkansas bauxite deposits. The highest gallium concentrations occur in the raw bauxite ore, with an average concentration of 76 parts per million (ppm). Gallium partitions with alumina (the product) rather than into mine waste residues. Results indicate an average niobium content of 662 ppm in the Arkansas bauxite ores. Niobium progressively increases in concentration from parent syenite (247 ppm) to clays (315 ppm) and further from bauxite (662 ppm) to processed residues (1,075 ppm). Low concentrations of scandium were found in all samples, averaging 10 ppm or less in the parent rock (syenite), bauxite, clays, and processing residues. Modest concentrations of the light and heavy REEs were found in samples of bauxite ores, bauxitic clays and interbedded clays, syenite, and the residues of ore. The highest REE values were found in processed residues, with average concentrations of 613 ppm total light REEs and 130 ppm total heavy REEs. These concentrations suggest that additional processing to recover REEs is unlikely to be economic in the foreseeable future.

Arkansas↗

The Sirte Basin province of Libya; Sirte-Zelten total petroleum system

The Sirte (Sirt) Basin province ranks 13th among the world?s petroleum provinces, having known reserves of 43.1 bil-lion barrels of oil equivalent (36.7 billion barrels of oil, 37.7 tril-lion cubic feet of gas, 0.1 billion barrels of natural gas liquids). It includes an area about the size of the Williston Basin of the north-ern United States and southern Canada (?490,000 square kilome-ters). The province contains one dominant total petroleum system, the Sirte-Zelten, based on geochemical data. The Upper Cretaceous Sirte Shale is the primary hydrocarbon source bed. Reservoirs range in rock type and age from fractured Precam-brian basement, clastic reservoirs in the Cambrian-Ordovician Gargaf sandstones, and Lower Cretaceous Nubian (Sarir) Sand-stone to Paleocene Zelten Formation and Eocene carbonates commonly in the form of bioherms. More than 23 large oil fields (>100 million barrels of oil equivalent) and 16 giant oil fields (>500 million barrels of oil equivalent) occur in the province. Abstract 1 Production from both clastic and carbonate onshore reservoirs is associated with well-defined horst blocks related to a triple junc-tion with three arms?an eastern Sarir arm, a northern Sirte arm, and a southwestern Tibesti arm. Stratigraphic traps in combina-tion with these horsts in the Sarir arm are shown as giant fields (for example, Messla and Sarir fields in the southeastern portion of the province). Significant potential is identified in areas marginal to the horsts, in the deeper grabens and in the offshore area. Four assessment units are defined in the Sirte Basin prov-ince, two reflecting established clastic and carbonate reservoir areas and two defined as hypothetical units. Of the latter, one is offshore in water depths greater than 200 meters, and the other is onshore where clastic units, mainly of Mesozoic age, may be res-ervoirs for laterally migrating hydrocarbons that were generated in the deep-graben areas. The Sirte Basin reflects significant rifting in the Early Cre-taceous and syn-rift sedimentary filling during Cretaceous through Eocene time, and post-rift deposition in the Oligocene and Miocene. Multiple reservoirs are charged largely by verti-cally migrating hydrocarbons along horst block faults from Upper Cretaceous source rocks that occupy structurally low posi-tions in the grabens. Evaporites in the middle Eocene, mostly post-rift, provide an excellent seal for the Sirte-Zelten hydrocarbon system. The offshore part of the Sirte Basin is complex, with subduction occurring to the northeast of the province boundary, which is drawn at the 2,000-meter isobath. Possible petroleum systems may be present in the deep offshore grabens on the Sirte Rise such as those involving Silurian and Eocene rocks; however, potential of these systems remains speculative and was not assessed.

Bulletin↗

Substantial contribution of biomethylation to aquifer arsenic cycling

Microbes play a prominent role in transforming arsenic to and from immobile forms in aquifers1. Much of this cycling involves inorganic forms of arsenic2, but microbes can also generate organic forms through methylation3, although this process is often considered insignificant in aquifers4, 5, 6, 7. Here we identify the presence of dimethylarsinate and other methylated arsenic species in an aquifer hosted in volcaniclastic sedimentary rocks. We find that dimethylarsinate is widespread in the aquifer and its concentration correlates strongly with arsenite concentration. We use laboratory incubation experiments and an aquifer injection test to show that aquifer microbes can produce dimethylarsinate at rates of about 0.1% of total dissolved arsenic per day, comparable to rates of dimethylarsinate production in surface environments. Based on these results, we estimate that globally, biomethylation in aquifers has the potential to transform 100 tons of inorganic arsenic to methylated arsenic species per year, compared with the 420–1,250 tons of inorganic arsenic that undergoes biomethylation in soils8. We therefore conclude that biomethylation could contribute significantly to aquifer arsenic cycling. Because biomethylation yields arsine and methylarsines, which are more volatile and prone to diffusion than other arsenic species, we further suggest that biomethylation may serve as a link between surface and subsurface arsenic cycling.

Nature Geoscience↗

Spawning habitat selection and egg deposition by reintroduced Lake Sturgeon in a tributary to Cayuga Lake, NY

In June 2017, we documented the first observed spawning event by a reintroduced population of Lake Sturgeon ( Acipenser fulvescens ) in Fall Creek, a tributary to Cayuga Lake, New York, USA. This is the first observed spawning encounter of adult Lake Sturgeon since the beginning of the multi-agency Lake Sturgeon restoration effort in Cayuga Lake initiated in 1995 by the New York State Department of Environmental Conservation. Lake Sturgeon egg deposition was found specifically on substrate mainly composed of gravel sized rocks with depths and flows that made up a unique microhabitat combination within the creek which is not typical of habitat identified in other Lake Sturgeon spawning habitat studies across the Great Lakes. An estimated 810,052 ± 24,386 eggs were deposited in the sampled area of Fall Creek. The identified, potentially productive spawning microhabitat type in Fall Creek is likely to be widespread in similar tributaries around Cayuga Lake as well as small tributaries to other Finger Lakes and Lake Ontario. Ongoing research is focused on the evaluation of the extent of Finger Lakes habitat similar to that identified in Fall Creek. This microhabitat evaluation of sturgeon spawning and the broad scale landscape knowledge of tributary habitats, should support subsequent management to restore Lake Sturgeon.

New York↗

Geologic Map of Part of the Uinkaret Volcanic Field, Mohave County, Northwestern Arizona

The geologic map of part of the Uinkaret Volcanic Field is one product of a cooperative project between the U.S. Geological Survey, the National Park Service, and the Bureau of Land Management to provide geologic information about this part of the Grand Canyon-Parashant Canyon National Monument of Arizona. The Uinkaret Volcanic Field is a unique part of western Grand Canyon where volcanic rocks have preserved the geomorphic development of the landscape. Most of the Grand Canyon, and parts of adjacent plateaus have already been mapped. This map completes one of the remaining areas where uniform quality geologic mapping was needed. A few dozen volcanoes and lava flows within the Grand Canyon are not included in the map area, but their geologic significance to Grand Canyon development is documented by Hamblin (1994) and mapped by Billingsley and Huntoon (1983) and Wenrich and others (1997). The geologic information in this report may be useful to resource managers of the Bureau of Land Management for range management, biological, archaeological, and flood control programs. The map area lies within the Shivwits, Uinkaret, and Kanab Plateaus, which are subplateaus of the Colorado Plateaus physiographic province (Billingsley and others, 1997), and is part of the Arizona Strip north of the Colorado River. The nearest settlement is Colorado City, Arizona, about 58 km (36 mi) north of the map area (fig. 1). Elevations range from about 2,447 m (8,029 ft) at Mount Trumbull, in the northwest quarter of the map area, to about 732 m (2,400 ft) in Cove Canyon, in the southeast quarter of the map area. Vehicle access is via the Toroweap and Mount Trumbull dirt roads (fig. 1). Unimproved dirt roads traverse other parts of the area except in designated wilderness. Extra fuel, two spare tires, and extra food and water are highly recommended for travelers in this remote area. The U.S. Bureau of Land Management, Arizona Strip Field Office, St. George, Utah manages most of the area. In addition, there are 12 sections belonging to the State of Arizona, about 12 sections are private land, and several sections are within the Grand Canyon National Park and Lake Mead National Recreational Area (U.S. Department of the Interior, 1993). The private land is in Potato Valley and Lake Valley, southwest and west of Mount Trumbull, and in Whitmore Canyon and Toroweap (Tuweap) Valley. Portions of the Sawmill Mountains, Mount Logan, and Mount Trumbull areas were originally established as part of the Dixie National Forest in 1904. In 1924, Dixie National Forest land became part of the Kaibab National Forest. Then on February 13, 1974, management of this part of the Kaibab National Forest was transferred to the Bureau of Land Management, Arizona Strip Field Office (personal commun. Becky Hammond, Bureau of Land Management, 1997). Mount Logan and part of the Sawmill Mountains are now designated as the Mount Logan Wilderness Area, and Mount Trumbull is designated as the Mount Trumbull Wilderness Area. Most of the map area is now part of the new Grand Canyon-Parashant Canyon National Monument established January 11, 2000. Lower elevations within Hells Hollow, Whitmore Canyon, Toroweap Valley, and Cove Canyon support a sparse growth of sagebrush, cactus, grass, and a variety of desert shrubs. Sagebrush, grass, cactus, cliffrose bush, pinion pine, and juniper trees thrive at elevations above 1,830 m (6,000 ft). Ponderosa pine and oak forests thrive at higher elevations in the Mount Trumbull and Mount Logan areas. Surface runoff within the map area drains south towards the Colorado River through Hells Hole, Hollow, Whitmore Canyon, Toroweap Valley, and Cove Canyon. Upper Toroweap Valley, upper Hells Hollow, and Whitmore Canyon are part of the physiographic area of Grand Canyon, but are not within Grand Canyon National Park (Billingsley and others, 1997). As of January 11, 2000, these areas are now part of the new Grand Canyon-Parashant

Miscellaneous Field Studies Map↗

Geologic assessment of undiscovered oil and gas resources—Lower Cretaceous Albian to Upper Cretaceous Cenomanian carbonate rocks of the Fredericksburg and Washita Groups, United States Gulf of Mexico Coastal Plain and State Waters

In 2010, the U.S. Geological Survey (USGS) assessed Lower Cretaceous Albian to Upper Cretaceous Cenomanian carbonate rocks of the Fredericksburg and Washita Groups and their equivalent units for technically recoverable, undiscovered hydrocarbon resources underlying onshore lands and State Waters of the Gulf Coast region of the United States. This assessment was based on a geologic model that incorporates the Upper Jurassic-Cretaceous-Tertiary Composite Total Petroleum System (TPS) of the Gulf of Mexico basin; the TPS was defined previously by the USGS assessment team in the assessment of undiscovered hydrocarbon resources in Tertiary strata of the Gulf Coast region in 2007. One conventional assessment unit (AU), which extends from south Texas to the Florida panhandle, was defined: the Fredericksburg-Buda Carbonate Platform-Reef Gas and Oil AU. The assessed stratigraphic interval includes the Edwards Limestone of the Fredericksburg Group and the Georgetown and Buda Limestones of the Washita Group. The following factors were evaluated to define the AU and estimate oil and gas resources: potential source rocks, hydrocarbon migration, reservoir porosity and permeability, traps and seals, structural features, paleoenvironments (back-reef lagoon, reef, and fore-reef environments), and the potential for water washing of hydrocarbons near outcrop areas. In Texas and Louisiana, the downdip boundary of the AU was defined as a line that extends 10 miles downdip of the Lower Cretaceous shelf margin to include potential reef-talus hydrocarbon reservoirs. In Mississippi, Alabama, and the panhandle area of Florida, where the Lower Cretaceous shelf margin extends offshore, the downdip boundary was defined by the offshore boundary of State Waters. Updip boundaries of the AU were drawn based on the updip extent of carbonate rocks within the assessed interval, the presence of basin-margin fault zones, and the presence of producing wells. Other factors evaluated were the middle Cenomanian sea-level fall and erosion that removed large portions of platform and platform-margin carbonate sediments in the Washita Group of central Louisiana. The production history of discovered reservoirs and well data within the AU were examined to estimate the number and size of undiscovered oil and gas reservoirs within the AU. Using the USGS National Oil and Gas Assessment resource assessment methodology, mean volumes of 40 million barrels of oil, 622 billion cubic feet of gas, and 14 million barrels of natural gas liquids are the estimated technically recoverable undiscovered resources for the Fredericksburg-Buda Carbonate Platform-Reef Gas and Oil AU.

Alabama, Arkansas, Florida, Louisiana, Mississippi↗

Geology of possible petroleum provinces in Alaska

The history of petroleum exploration in Alaska and the geology of possible petroleum provinces in Alaska are reviewed. Maps showing Alaska's major Mesozoic and Tertiary tectonic elements, possible petroleum provinces, and indications of petrol, are included in this report. Annotated references in Geological Survey publications relating to petroleum and oil shale in Alaska are given at the end of the report. For the purpose of appraising its petroleum possibilities, Alaska is divided into the southern, central, and northern major geologic-physiographic regions. Southern Alaska includes the arcuate mountain chain formed by the Alaska and Aleutian Ranges and the Mentasta- Nutzotin Mountains, the coastal range and valley area to the south, and the southeastern Alaska "panhandle" -- an area of 185,000 square miles. Oil seeps on the west shore of Cook Inlet in southern Alaska were known as early as 1853, and claims were staked in this region in 1882. Drilling began near the oil seeps in the Katalla district about 1901, and this started Alaska's first period of oil activity. From 1902 to 1933 the Katalla field produced 154,000 barrels of oil from fractured shale and sandstone of Tertiary age the- first and only commercial production in Alaska. On the basis of geology, surficial indications of petroleum, and test wells drilled, six possible petroleum provinces are indicated in southern Alaska. They are Heceta Island area, Keku Islands area, Cook Inlet Mesozoic province, Gulf of Alaska Tertiary province, Cook Inlet Tertiary province, and Copper River basin. The exposed rocks in the Heceta Island area include lower Paleozoic graywacke-type sandstone, sandstone, conglomerate, and massive limestones with reeflike structures; igneous rocks are rare or lacking in much of the area. The Kosciusko-Tuxekan-Heceta synclinorium, the main structural feature, is modified by minor folds and faults. Some of the minor folds are reported to be broad and open, with flanks dipping 20°-145°. As far as known, the Heceta Island area has not heretofore been seriously considered as a possible petroleum province. Rocks of Silurian to Cretaceous age are exposed in the Keku Island area and include moderately folded and relatively unaltered limestone and other marine sedimentary rocks. The Cook Inlet Mesozoic province, a land area of approximately 18,500 square miles, includes a great thickness of unmetamorphosed marine sedimentary rocks of Jurassic and Cretaceous age. At least 23 test wells were drilled or started in this province by the end of 1955. Shows of oil and gas were encountered in many of these wells. During 1955 at least ten oil companies were active in this area and by the end of 1955 about 1 1/2 million acres were included in oil and gas leases applied for or granted. The Gulf of Alaska Tertiary province includes about 5,200 square miles in which rocks of Tertiary age are exposed or are believed to underlie Quaternary deposits. Between 1901 and the end of 1955 about 47 wells were drilled or started in this province. The Cook Inlet Tertiary province embraces an area of about 9,500 square miles, of which about 4,100 is covered by the shallow waters of Cook Inlet. Petroleum exploration has been in that part of the area which overlaps the Cook Inlet Mesozoic province. Eocene or younger Tertiary nonmarine sedimentary rocks are believed to underlie much of the province, and marine rocks of Tertiary age may also be present. The Copper River basin is a topographic basin underlain by unconsolidated deposits of Quaternary age. Tertiary rocks favorable for the accumulation of petroleum may underlie part of the basin but this is not believed likely. Except for some leasing activity no petroleum exploration has been recorded in the Copper River Basin to the end of 1955. Central Alaska is a region of about 275,000 square miles and consists of an irregular assemblage of intricately dissected uplands and alluvium-floored lowland basins. Scattered peaks of resistant intrusive igneous rocks surmount most of the upland areas. In the vast region of central Alaska only six test wells are known to have been drilled for the purpose of finding oil and gas. The maximum depth reached was 350 feet and the holes were mostly or entirely in Quaternary deposits. In recent years several oil companies have investigated some parts of the region and large areas in the Yukon-Koyukuk province are now under lease. Oil seeps, gas seeps, and other indications of petroleum have been reported from many localities; samples from two localities have been analyzed and reported to be petroleum. The geology of central Alaska is similar in a general way to that of the area between the Rocky Mountains and Sierra-Cascade belts of the United States. Sedimentary rocks, probably equivalent to the Precambrian Belt series, and rocks of the Cambrian and all younger geologic systems have been recognized in central Alaska. The structure of the region is known to be complex, but except in local mineral districts, it has not been mapped in detail. Based on the limited amount of available information, the region cannot be regarded as distinctly favorable for significant accumulations of petroleum. However, three pre-Cenozoic provinces, the Yukon-Koyukuk, the Kobuk, and the Kandik, and several large Cenozoic basin provinces may be worthy of further investigation. Northern Alaska includes the Brooks Range and all the treeless tundra north to the Arctic Coast, an area of about 125,000 square miles. The presence of oil seeps along the Arctic Coast has been known at least since 1900 and a description of the Cape Simpson oil seeps vas published in 1909. Since then oil and gas seeps have been described from nine localities, and oil shales and oil-bearing sandstones are known from many localities in the Arctic Foothills province. Oil and gas deposits have been discovered and geologic conditions are favorable for oil and gas accumulations in approximately half of the region. In 1923 approximately 37,000 square miles in northern Alaska was reserved by Executive order as Naval Petroleum Reserve No. 4. In 1944 the U. S. Navy began a vast petroleum exploration program which was suspended in 1953. In the years 1945 through 1955, 37 test wells and 45 core tests were drilled on 18 structures. Three oil fields, Umiat, Simpson, and Fish Creek, and two gas fields, South Barrow and Gubik, were discovered. Total reserve estimates for all discoveries of oil to 1955 range from 30 to 100 million barrels, and for gas, from 370 billion to 900 billion cubic feet. All northern Alaska, with the exception of the Brooks Range, can be considered a possible petroleum province, but the region can be subdivided into provinces of somewhat different potentialities. These subdivisions roughly correspond with the geomorphic provinces and sections, which in turn reflect differences in geology. The known oil-bearing beds are of Mesozoic age, primarily Cretaceous, and thus the possible petroleum provinces could be designated as Mesozoic. However, Paleozoic and Cenozoic rocks with favorable reservoir characteristics are exposed in the region and possibly underlie, in favorable structural situations, some of the areas as yet not tested. The Arctic Coastal Plain province includes gently folded and flat-lying Mesozoic beds that overlie a basement complex of Paleozoic and early Mesozoic age. Near the southern edge of this province the basement rocks are at depths of at least 20,000 feet, and to the north these rocks rise to within 2,500 feet of the surface. The Teshukpuk Lake section of the Arctic Coastal plain includes many of the known oil seeps; it is the most accessible to sea transportation, and lies almost completely within NPR 4. Thirteen test wells and 35 core tests have been drilled here; one gas field and two (at present, noncommercial) oil fields have been discovered. The possibility of further discoveries may depend largely on locating porous sandstones in stratigraphic rather than anticlinal traps. The White Hills section is distinguished topographically from the Teshukpruk section by its white-gravel-covered hills and fever lakes, and geologically by the presence of Tertiary rocks, including 2,000 feet of nonmarine beds in the west and at least 7,000 feet of marine beds to the east, in the vicinity of Carter Creek. This section appears to be more complex structurally. No test wells have been drilled in the White Hills section. The Northern Foothills section includes many closed anticlines. Twenty-four test wells and ten core tests have been drilled on 11 structures and two discoveries have been made -the Umiat oil field and the Gubik gas field. All these tests have been drilled in Cretaceous rocks. The Southern Foothills section is structurally similar to the Alberta Foothills and to the northern part of the Brooks Range. Great thicknesses of marine shale of Lover Cretaceous, Jurassic, and Triassic age are exposed. The outcropping Mesozoic sandstones are generally poorly sorted, nonporous, and impermeable. To the south the section is bordered by mountainous exposures of Mississippian limestone, which probably underlie at least part of this section. The rocks that underlie the deeply eroded complex structures of the Brooks Range include schist, slate, argillite, and limestone. Some exposed limestones have a strong petroleum-like odor and contain traces of petroleum residues.

Alaska↗

Generalized hydrogeology and ground-water budget for the C Aquifer, Little Colorado River Basin and parts of the Verde and Salt River Basins, Arizona and New Mexico

The C aquifer underlies the Little Colorado River Basin and parts of the Verde and Salt River Basins and is named for the primary water-bearing rock unit of the aquifer, the Coconino Sandstone. The areal extent of this aquifer is more than 27,000 square miles. More than 1,000 well and spring sites were identified in the U.S. Geological Survey database for the C aquifer in Arizona and New Mexico. The C aquifer is the most productive aquifer in the Little Colorado River Basin. The Little Colorado River is the primary surface-water feature in the area, and it has a direct hydraulic connection with the C aquifer in some areas. Spring discharge as base flow from the C aquifer occurs predominantly in the lower 13 miles of the Little Colorado River subsequent to downward leakage into the deeper Redwall-Muav Limestone aquifer. Ground-water mounds or divides exist along the southern and northeastern boundaries of the Little Colorado River Basin. The ground-water divides are significant boundaries of the C aquifer; however, the location and persistence of the divides potentially can be affected by ground-water withdrawals. Ground-water development in the C aquifer has increased steadily since the 1940s because population growth has produced an increased need for agricultural, industrial, and public water supply. Ground-water pumpage from the C aquifer during 1995 was about 140,000 acre-feet. Ground-water budget components for the C aquifer were evaluated using measured or estimated discharge values. The system was assumed to be in a steady-state condition with respect to natural recharge and discharge, and the stability of discharge from major springs during the past several decades supported the steady-state assumption. Downward leakage to the Redwall-Muav Limestone aquifer is a major discharge component for the ground-water budget. Discharge from the C aquifer is estimated to be 319,000 acre-feet per year.

Arizona;New Mexico↗