Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Geological & Geophysical Surveys”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources
USGS1990

Map showing the distribution of zinc in stream-sediment samples, Richfield 1° x 2° quadrangle, Utah

This map of the Richfield 1° x 2° quadrangle, Utah, shows the regional distribution of zinc in the less-than-0.180-mm (minus-80-mesh) fraction of stream-sediments. It is part of a folio of maps of the Richfield 1° x 2° quadrangle, Utah, prepared under the Conterminuous United States Mineral Assessment Program. Other published geochemical maps in this folio are listed in the references (this publication). The Richfield quadrangle is located in west-central Utah and includes the eastern part of the Pioche-Marysvale igneous and mineral belt, which extends from the vicinity of Pioche in southeastern Nevada, east-northeastward for 155 miles into central Utah. The western two-thirds of the Richfield quadrangle is part of the Basin and Range province, whereas the eastern third is part of the High Plateaus of Utah, a subprovince of the Colorado Plateau. Bedrock in the northern part of the Richfield quadrangle consists predominantly of Late Proterozoic and Paleozoic sedimentary strata that were thrust eastward during the Sevier orogeny in Cretaceous time onto an autochthon of Mesozoic sedimentary rocks located in the eastern part of the quadrangle. The southern part of the quadrangle is largely underlain by Oligocene and younger volcanic rocks and related intrusions. Extensional tectonism in late Cenozoic time broke the bedrock terrain into a series of north-trending fault blocks; the uplifted mountain areas were eroded to various degrees and the resulting debris was deposited in adjacent basins. Most of the mineral deposits in the Pioche-Marysvale mineral belt were formed as a result of igneous activity in the middle and late Cenozoic time. A more complete description of the geology and a mineral-resource appraisal of the Richfield quadrangle appears in Steven and Morris (1984 and 1987). The regional sampling program was designed to define broad geochemical patterns and trends that can be utilized along with geological and geophysical data to assess the mineral-resource potential for this quadrangle. Reconnaissance geochemical surveys are valuable tools in mineral exploration, especially when used in conjunction with data obtained from other earth science disciplines. Identifying specific exploration targets generally involves additional, more detailed investigations.

Utah↗
USGS1999

Digital data for the geologic framework of the Alaska Peninsula, southwest Alaska, and the Alaska Peninsula terrane

These digital databases are the result of the compilation and reinterpretation of published and unpublished 1:250,000- and 1:63,360-scale mapping. The map area covers approximately 62,000 sq km (23,000 sq mi) in land area and encompasses much of 13 1:250,000-scale quadrangles on the Alaska Peninsula in southwestern Alaska. The compilation was done as part of the U.S. Geological Survey's Alaska Mineral Resource Assessment project (AMRAP), whose goal was create and assemble geologic, geochemical, geophysical, and other data in order to perform mineral resource assessments on a quadrangle, regional or statewide basis. The digital data here was created to assist in the completion of a regional mineral resource assessment of the Alaska Peninsula. Mapping on the Alaska Peninsula under AMRAP began in 1977 in the Chignik and Sutwik Island 1:250,000 quadrangles (Detterman and others, 1981). Continued mapping in the Ugashik, bristol bay, and northwestern Karluk quadrangles (Detterman and others, 1987) began in 1979, followed by the Mount Katmai, eastern Naknek, and northwestern Afognak quadrangles (Riehle and others, 1987; Riehle and others, 1993), the Port Moller, Stepovak bay, and Simeonof Island quadrangles (Wilson and others, 1995) beginning in 1983. Work in the Cold bay and False Pass quadrangles (Wilson and others, 1992 [Superseded by Wilson and others 1997, but not incorporated herein]) began in 1986. The reliability of the geologic mapping is variable, based, in part, on the field time spent in each area of the map, the available support, and the quality of the existing base maps. In addition, our developing understanding of the geology of the Alaska Peninsula required revision of earlier maps, such as the Chignik and Sutwik Island quadrangles map (Detterman and others, 1981) to reflect this new knowledge. We have revised the stratigraphic nomenclature (Detterman and others, 1996) and our assignment of unit names to some rocks has been changed. All geologic maps on which this compilation is based were published using the Universal Transverse Mercator projection (UTM; Zones 3, 4, and 5). because of the distortions use of the UTM projection would produce on a map of small scale and large area, the plot and graphics files derived from this data are plotted using a more appropriate Albers Equal-area projection for publication.

Alaska↗
USGS1999

McVCO handbook 1999

McVCO is a microcontroller-based frequency generator that replaces the voltage controlled oscillator (VCO) used in the analog telemetry of seismic data. It accepts low-level signals from a seismometer and produces a frequency modulated subcarrier suitable for radio or telephone links to a data collection site. McVCO was designed for the purpose of improving the analog telemetry of signals within the Pacific Northwest Seismograph Network (PNSN). Its development received support from the University of Washington Geophysics Program, and both the Volcano Hazards and Earthquake Hazards programs of the United States Geological Survey (USGS). This handbook covers operation of McVCO, provides a technical reference for those who require a closer look at how McVCO works, and covers a collection of topics that need explicit treatment or that spring from deployment of the instrument.

Open-File Report↗
USGS2009

The Longview/Lakeview barite deposits, southern National Petroleum Reserve, Alaska (NPRA) — Potential-field models and preliminary size estimates

Longview and Lakeview are two of the larger stratiform barite deposits hosted in Mississippian Akmalik Chert in the Cutaway Basin area (Howard Pass C-3 quadrangle) of the southern National Petroleum Reserve, Alaska (NPRA). Geologic studies for the South NPRA Integrated Activity Plan and Environmental Impact Statement process included an attempt to evaluate the possible size of barite resources at Longview and Lakeview by using potential-field geophysical methods (gravity and magnetics). Gravity data from 227 new stations measured by the U.S. Geological Survey, sparse regional gravity data, and new, high-resolution aeromagnetic data were forward modeled simultaneously along seven profiles perpendicular to strike and two profiles along strike of the Longview and Lakeview deposits. These models indicate details of the size and shape of the barite deposits and suggest thicknesses of 15 to 24 m, and 9 to 24 m for the Longview and Lakeview deposits, respectively. Two groups of outcrops span 1.8 km of strike length and are likely connected below the surface by barite as much as 10 m thick. Barite of significant thickness (>-5 m) is unlikely to occur north of the presently known exposures of the Longview deposit. The barite bodies have irregular (nonplanar) bases suggestive of folding; northwest-trending structures of small apparent offset cross strike at several locations. Dip of the barite is 10 to 25 degrees to the southeast. True width of the bodies (the least certain dimension) is estimated to be 160 to 200 m for Longview and 220 to 260 m for Lakeview. The two bodies contain a minimum of 4.5 million metric tons of barite and more than 38 million metric tons are possible. Grades of the barite are relatively high, with high specific gravities and low impurities. The potential for the Cutaway Basin to host economically minable quantities of barite is uncertain. Heavy-mineral concentrate samples from streams in the area, trace-element analyses, and physicalproperty measurements of bulk samples derived from trenching or drilling would be valuable for future assessment work.

Alaska↗
USGS2009

Hydrogeology of the Lake Tahoe Basin, California and Nevada

Ground water in the Lake Tahoe basin is the primary source of domestic and municipal water supply and an important source of inflow to Lake Tahoe. Over the past 30-40 years, Federal, State, and local agencies, and research institutions have collected hydrologic data to quantify the ground-water resources in the Lake Tahoe basin. These data are dispersed among the various agencies and institutions that collected the data and generally are not available in a format suitable for basin-wide assessments. To successfully and efficiently manage the ground-water resources throughout the Lake Tahoe basin, the U.S. Geological Survey (USGS) in cooperation with the U.S. Forest Service (USFS) compiled and evaluated the pertinent geologic, geophysical, and hydrologic data, and built a geodatabase incorporating the consolidated and standardized data for the Lake Tahoe basin that is relevant for examining the extent and characteristics of the hydrogeologic units that comprise the aquifers.

California, Nevada↗
USGS2023

Beyond conductive targets: Characterizing lithium-prospective lacustrine evaporite mineral systems of North America’s Basin and Range Province with regional-scale AEM

The Basin and Range province of North America hosts substantial lacustrine evaporite mineral systems prospective for lithium, a critical mineral currently listed for mineral resource assessment by the U.S. Geological Survey. Airborne electromagnetic (AEM) surveys are being conducted to support these assessments by identifying shallow clays and brines, as well as through improving the shallow subsurface geologic framework of the regional fluid flow system. In 2022-2023, three focus areas with proven lithium resources or considered highly prospective for lithium are being surveyed. Results from this effort can help to improve our understanding of the geologic conditions and geophysical signatures associated with known resource regions and benefit future lithium resource assessments by identifying regions with similar geophysical and geologic characteristics.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2025

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico↗
USGS2017

Sediment data collected in 2014 and 2015 from around Breton and Gosier Islands, Breton National Wildlife Refuge, Louisiana

Breton Island, located at the southern end of the Chandeleur Islands, supports one of Louisiana’s largest historical brown pelican ( Pelecanus occidentalis ) nesting colonies. Although the brown pelican was delisted as an endangered species in 2009, nesting areas are threatened by continued land loss and are extremely vulnerable to storm impacts. The U.S. Fish and Wildlife Service proposed to restore Breton Island to pre-Hurricane Katrina conditions through rebuilding the shoreface, dune, and back-barrier marsh environments. Prior to restoration, scientists from the U.S. Geological Survey’s (USGS) St. Petersburg Coastal and Marine Science Center Geologic and Morphologic Evolution of Coastal Margins project collected high-resolution geophysical (topography, bathymetry, and sub-bottom profiles) and sedimentologic data from around Breton Island to characterize the geologic framework of the island platform, nearshore, and shelf environments. These data will be used to characterize the geologic framework around Breton Island, identify potential borrow areas for restoration efforts, quantify seafloor change, and provide information for sediment transport and morphologic change models to assess island response to restoration and natural processes. This report, along with the accompanying USGS data release, serves as an archive of sediment data from vibracores, push cores, and submerged grab samples collected from around Breton and Gosier Islands, Louisiana, during two surveys conducted in July 2014 and January 2015 (USGS Field Activity Numbers 2014–314–FA and 2014–336–FA, respectively). Sedimentologic and stratigraphic metrics (for example, sediment texture or unit thicknesses) derived from these data can be used to ground-truth the geophysical data and characterize potential sand resources or can be incorporated into sediment transport or morphologic change models. Data products, including sample location tables, descriptive core logs, core photographs and x-radiographs, results of sediment grain-size analyses, and geographic information system data files with accompanying formal Federal Geographic Data Committee metadata can be downloaded from the accompanying data release.

Louisiana↗
USGS2007

Geophysical analysis of the Salmon Peak Formation near Amistad Reservoir Dam, Val Verde County, Texas, and Coahuila, Mexico, March 2006, to aid in piezometer placement

Since 1992, numerous sinkholes have developed northwest of the Amistad Reservoir dam on the Rio Grande. Increases in the discharge of springs south of the dam, on the western side of the Rio Grande, in Coahuila, Mexico, have been documented. In 1995 the Mexico Section of the International Boundary and Water Commission (IBWC) completed a study of the western embankment (Coahuila, Mexico) of the dam that included surface geophysics, borehole geophysics, and installation of piezometers to learn more about subsurface conditions. As part of a 5-year safety inspection in 2005, technical advisors recommended that one line of similarly constructed piezometers be installed on the eastern embankment (Val Verde County, Texas) of the dam for comparison of water levels (potentiometric head) on both the western and eastern embankments of Amistad Reservoir dam. To provide technical assistance for the horizontal and vertical placement of piezometers on the eastern embankment of Amistad Reservoir dam, the U.S. Geological Survey, in cooperation with the U.S. Section of the IBWC, conducted a study along both the western and eastern embankments of Amistad Reservoir dam. The study involved an integrated approach using surface and borehole geophysical methods. In the western embankment investigation, geological and geophysical characteristics that indicate relatively large water-yielding properties of the Salmon Peak Formation were identified. The direct-current (DC) resistivity method was selected as the surface geophysical reconnaissance technique to correlate relatively large water-yielding properties of the Salmon Peak Formation, identified from analysis of borehole geophysical logs, with variations in subsurface resistivity. The dipole-dipole array and the reciprocal Schlumberger array were selected as the most applicable DC resistivity arrays. Two resistivity units were identified in both the dipole-dipole array data and the reciprocal Schlumberger array data along DC resistivity profiles on both embankments. Resistivity unit 1 generally is of relatively low resistivity, ranging from 45 to 150 ohm-meters compared with resistivity unit 2, which ranges from 120 to 345 ohm-meters (depending on the DC array type). The presence of mapped sinkholes in the reservoir north of the western embankment study area and the zone of increased water content (as indicated by zones of low neutron log count rates in nearby piezometers) leads to the conclusion that resistivity unit 1 is a preferential flow path where surface water from Amistad Reservoir is forced into the ground-water system (because of increased head from the reservoir). In the eastern embankment investigation, trends in the spatial distribution of sinkholes and the occurrence of weathered zones were identified from geologic descriptions of cores. The correlation of surface geophysical DC resistivity, historical lithologic data, and general trend of documented sinkholes along the eastern end of the eastern embankment profile were used to justify further exploration (drilling of piezometers) in the eastern expression of resistivity unit 1. The spatial location of the piezometers and the screened intervals were selected to best match the locations of the screened intervals of the western embankment piezometers. Six piezometers were installed on the eastern embankment and logged using borehole geophysical techniques. Surface DC resistivity sections superimposed on the resistivity logs for two piezometers indicate three discernible resistivity units that correlate with resistivity units 2, 1, and 2, respectively, identified in the western embankment study area. Resistivity units 1 and 2 in the DC resistivity profiles generally correspond with low and high resistivity zones, respectively, on the normal and lateral resistivity logs collected in the nearby piezometers at the time of installation.

Scientific Investigations Report↗
USGS2011

Geophysical, geochemical, mineralogical, and enivronmental data for rock samples collected in a mineralized volcanic environment, upper Animas River watershed, Colorado

This report provides analyses of 90 rock samples collected in the upper Animas River watershed near Silverton, Colo., from 2001 to 2007. The samples are analyzed for geophysical, geochemical, mineralogical, and environmental rock properties of acid neutralizing capacity and net acid production. The database is derived from both published (n=68) and unpublished (n=32) data. New for all samples are geophysical measurements of electrical resistivity, density, and porosity. Rock samples were acquired from 12 geologic units that include key Tertiary volcanic and plutonic lithologies, all with varying degrees of alteration. The purpose of this study is to * provide a comprehensive and complete record of U.S. Geological Survey rock samples collected and similarly analyzed in the upper Animas River watershed for various physical, chemical, and geoenvironmental properties; * provide measurements of geophysical rock properties of lithologic units to establish ground truth with respect to watershed-scale airborne magnetic and electrical survey data; * use the data to interpret the airborne geophysical anomalies to characterize rocks in terms of acid neutralizing capacity or net acid production; and * provide measurements to study the geochemical, mineralogical, and geophysical characteristics of rocks having weak to extreme degrees of alteration and to develop an understanding of how these characteristics change with alteration type. Data are provided in two digital formats: an Arc/Info geodatabase and a Microsoft Excel spreadsheet.

Data Series↗
USGS2007

Preliminary physical stratigraphy and geophysical data of the USGS Hope Plantation core (BE-110), Bertie County, North Carolina

In March and April, 2004, the U.S. Geological Survey (USGS), in cooperation with the North Carolina Geological Survey (NCGS) and the Raleigh Water Resources Discipline (WRD), drilled a stratigraphic test hole and well in Bertie County, North Carolina (fig. 1). The Hope Plantation test hole (BE-110-2004) was cored on the property of Hope Plantation near Windsor, North Carolina. The drill site is located on the Republican 7.5 minute quadradrangle at lat 36?01'58'N., long 78?01'09'W. (decimal degrees 36.0329 and 77.0192) (fig. 2). The altitude of the site is 48 ft above mean sea level as determined by Paulin Precise altimeter. This test hole was continuously cored by Eugene F. Cobbs, III and Kevin C. McKinney (USGS) to a total depth of 1094.5 ft. Later, a ground water observation well was installed with a screened interval between 315-329 feet below land surface (fig. 3). Upper Triassic, Lower Cretaceous, Upper Cretaceous, Tertiary, and Quaternary sediments were recovered from the site. The core is stored at the NCGS Coastal Plain core storage facility in Raleigh, North Carolina. In this report, we provide the initial lithostratigraphic summary recorded at the drill site along with site core photographs, data from the geophysical logger, calcareous nannofossil biostratigraphic correlations (Table 1) and initial hydrogeologic interpretations. The lithostratigraphy from this core can be compared to previous investigations of the Elizabethtown corehole, near Elizabethtown, North Carolina in Bladen County (Self-Trail, Wrege, and others, 2004), the Kure Beach corehole, near Wilmington, North Carolina in New Hanover County (Self-Trail, Prowell, and Christopher, 2004), the Esso #1, Esso #2, Mobil #1 and Mobil #2 cores in the Albermarle and Pamlico Sounds (Zarra, 1989), and the Cape Fear River outcrops in Bladen County (Farrell, 1998; Farrell and others, 2001). This core is the third in a series of planned benchmark coreholes that will be used to elucidate the physical stratigraphy, facies, thickness, and hydrogeology of the Tertiary and Cretaceous Coastal Plain sediments of North Carolina.

North Carolina↗
USGS2007

Integrated Geologic, Geochemical, and Geophysical Studies of Big Bend National Park, Texas

Introduction Big Bend National Park (BBNP), Texas, covers 801,163 acres (3,242 km2) and was established in 1944 through a transfer of land from the State of Texas to the United States. The park is located along a 118-mi (190-km) stretch of the Rio Grande at the United States border with Mexico. The U.S. Geological Survey (USGS) began a 5-year project in 2003 with the objective of studying a number of broad and diverse geologic, geochemical, and geophysical topics in BBNP. This fact sheet describes results of some of the research by USGS scientists working in BBNP.

Fact Sheet↗
USGS1974

Geology of the Harper Quadrangle, Liberia

As part of a program undertaken cooperatively by the Liberian Geological Survey (LGS) and the U. S. Geological Survey (USGS), under the sponsorship of the Government of Liberia and the Agency for International Development, U. S. Department of State, Liberia was mapped by geologic and geophysical methods during the period 1965 to 1972. The resulting geologic and geophysical maps are published in ten folios, each covering one quadrangle (see index map). The first systematic mapping in the Harper quadrangle was by Baker, S. P. Srivastava, and W. E. Stewart (LGS) at a scale of 1:500,000 in the vicinity of Harper in the southeastern, and of Karloke in the northeastern part of the quadrangle in 1960-61. Brock and Chidester carried out systematic mapping of the quadrangle at a scale of 1:250,000 in the period September 1971-May 1972; the geologic map was compiled from field data gathered by project geologists and private companies as indicated in the source diagram, photogeologic maps, interpretation of airborne magnetic and radiometric surveys, field mapping, and ground-based radiometric surveys in which hand-held scintillators were used. R. W. Bromery, C. S. Wotorson, and J. C. Behrendt contributed to the interpretation of geophysical data. Total-intensity aeromagnetic and total-count gamma radiation maps (Behrendt and Wotorson, in press a, b), and unpublished data derived from those maps, including the near-surface and the regional magnetic components and aeromagnetic/radiometric correlations, were used in the interpretation.

Harper Quadrangle↗
USGS1983

Geologic and aeromagnetic maps and mineral resource potential survey of the Blackjack Springs Wilderness, Vilas County, Wisconsin

The mineral resource potential of the Blackjack Springs Wilderness in the Nicolet National Forest, Vilas County, Wisc., was evaluated in 1982. No bedrock exposures are known in or near the wilderness. Geophysical data and regional geologic relations suggest that the area consists mostly of recrystallized and deformed mafic volcanic rocks and associated mafic intrusives of Early Proterozoic age. The only identified mineral resources in the Blackjack Springs Wilderness are sand and gravel, but these commodities are abundant regionally. While the occurrence of stratabound massive-sulfide (cooper-zinc-lead) and (or) magmatic sulfide (copper and (or) nickel)-type deposits are possible in the wilderness, their occurrence is not probable.

Wisconsin↗
USGS2024

Results of 2018–19 water-quality and hydraulic characterization of aquifer intervals using packer tests and preliminary geophysical-log correlations for selected boreholes at and near the former Naval Air Warfare Center Warminster, Bucks County, Pennsylvania

The U.S. Geological Survey (USGS) collected data on the vertical distribution of hydraulic head, specific capacity, and water quality using aquifer-interval-isolation tests and other vertical profiling methods in 15 boreholes completed in fractured sedimentary bedrock in Northampton, Warminster, and Warwick Townships, Bucks County, Pennsylvania during 2018–19. This work was done, in cooperation with the U.S. Navy, to support detailed investigations at and near the former Naval Air Warfare Center (NAWC) Warminster, where groundwater contamination with per- and polyfluoroalkyl substances (PFAS) had become a concern since 2014. Two PFAS compounds, perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), have been measured in groundwater samples from supply and monitoring wells at or near NAWC Warminster in concentrations above U.S. Environmental Protection Agency health advisory levels for drinking water. The area is underlain by the Triassic Stockton Formation, which predominantly consists of sandstone interbedded with shale and siltstone beds and forms a layered fractured-rock aquifer used for private, industrial, and public drinking water supply. The vertical distribution of aquifer properties and water quality was assessed through hydraulic tests and sampling of aquifer intervals using a straddle-packer system (13 boreholes) or depth-discrete point sampling under known borehole-flow conditions (2 boreholes). Geophysical and video logs collected by USGS during 2017–19 were used to identify potential water-bearing fractures in 15 boreholes, which ranged in depth from 210 to 604 feet (ft) and included 6 boreholes drilled in 2018 and 9 existing wells on or near the former NAWC Warminster. Measured borehole flow was predominantly downward in most of the deepest boreholes (greater than 400 ft), which were commonly located at the highest land-surface elevations, with inflow from fractures at relatively shallow depths and outflow through fractures near or below depths of 500 ft below land surface. Hydraulic head differences measured during packer tests were up to about 60 ft between shallow and deep intervals. Borehole flow was predominantly upward in most boreholes less than 400 ft in depth and farther from, and at lower land-surface elevations than, the former NAWC Warminster. Total borehole specific capacity ranged from about 0.07 to 41 gallons per minute per foot [(gal/min)/ft]. Specific-capacity values for individual intervals ranged from 0.02 to 40.0 (gal/min)/ft, with a median of 1.14 (gal/min)/ft and a large range in values at most depths. Differences in water quality of samples as indicated by field properties (pH, dissolved oxygen, and specific conductance) and concentrations of dissolved major ions, PFOA, and PFOS were apparent among isolated intervals in the boreholes. Summed concentrations of PFOA and PFOS ranged from about 11 to 10,780 nanograms per liter (ng/L) and were greater than the 2016 U.S. Environmental Protection Agency health advisory of 70 ng/L for summed PFOA and PFOS concentrations in 62 of 104 intervals and discrete depths tested. The mass ratio of PFOS to PFOA was generally higher than 1.0 in samples with summed PFOA and PFOS concentrations greater than 70 ng/L, with ratio values as high as 8.7. In many boreholes, summed concentrations of PFOA and PFOS were positively related to chloride concentrations, which were elevated above natural-background values [less than 10 milligrams per liter] in most samples and as high as 717 milligrams per liter. Sources of the elevated chloride other than, or in addition to, common rock salt (sodium chloride) were indicated by chloride to sodium molar ratios greater than 1.0. Water-quality data indicated that sampled water from some intervals with lower hydraulic heads may be affected by water from intervals with higher hydraulic heads because of vertical flow in open boreholes; samples from these intervals with lower hydraulic heads may not be fully representative due to some component of cross contamination and should be interpreted with caution. Through a preliminary correlation of natural gamma and resistivity logs of boreholes drilled at and near the former NAWC Warminster, 11 lithologic units were identified and interpreted to strike northeast and dip to the northwest. Hydraulic heads were generally highest in isolated intervals that intercepted beds which, when projected up dip, crop out at the highest land-surface elevation on the former NAWC Warminster, indicating that the dipping-bed structure and topography are factors affecting the distribution of hydraulic head in the aquifer. The hydrogeologic framework in conjunction with the vertical distribution of hydraulic heads and water quality may assist in evaluating the locations of various PFAS sources and potential migration pathways of PFAS in groundwater at and near NAWC Warminster.

Pennsylvania↗
USGS1995

EAST93: Geophysical traverse from the Transantarctic Mountains to the Wilkes Basin, East Antarctica

The East Antarctic Seismic Traverse (EAST93) was a geophysical traverse designed to image the bedrock under the East Antarctic ice cap. The traverse started 10 km west of the Taylor Dome drill site and 25 km west of the exposed bedrock of the Transantarctic Mountains at Lashly Mt. and ended 323 km west of the drill site over the Wilkes subglacial basin (Fig. 1). The traverse was located subparallel to latitude 78° S starting 30-50 km north of the Victoria Land Traverse (1958-1959). It was carried out jointly by the U.S. Geological Survey and Stanford University, U.S.A., together with the Institute of Geological and Nuclear Sciences, and Victoria University, New Zealand, during December 1993 and January 1994. The geophysical traverse included 236 km of multichannel seismic reflection data at 150 m shot intervals, 312.5 km of gravity data collected at intervals of 2.1 km, 312.5 km of magnetic data (total field intensity) collected at average intervals of 0.5 km, and 205 km of ground penetrating radar at intervals of 77 m. Relative locations and elevations of the entire traverse were measured at intervals of 150 m by traditional surveying methods, and tied to three absolute locations measured by the Global Positioning System (GPS). EAST93 is the first large-scale geophysical traverse on the polar plateau to our knowledge since the early 1960s. As such, the experiment presented several logistical challenges: (1) how to collect regional seismic profiles during the short Antarctic summer; (2) how to keep the scientific instruments running with minimal protection in harsh conditions; and (3) how to combine daily moves of camp with full days of work. The scientific and logistical aspects of the project proceeded, in general, according to plan despite the harsh conditions and our lack of previous experience on the polar plateau. Two unanticipated problems affected the progress of the work: the strong wind which slowed seismic acquisition, and the break-down of one of the large traverse vehicles. The major operational lessons of this project are. (1) Primacord laid close to the surface is not an adequate seismic source for imaging under the thick East Antarctic ice sheet, despite positive prior tests on the Ross Ice Shelf. (2) It is necessary to reduce the 6-7 hours spent daily on camp move and other chores by integrating the living quarters into the working teams, and by improving vehicle warming methods and generator housing. The following report details the operational and logistical aspects of the work, the weather and ground conditions, the technical aspects of acquisition of geophysical data, and lessons and recommendations for future geophysical traverses.

Open-File Report↗
USGS2011

Geophysical, geochemical, and mineralogical data from the Pebble Cu-Au-Mo porphyry deposit area, southwest Alaska: Contributions to assessment techniques for concealed mineral resources

In 2007, the U.S. Geological Survey began a multidisciplinary study in southwest Alaska to investigate the setting and detectability of mineral deposits in concealed volcanic and glacial terranes. The study area hosts the world-class Pebble porphyry Cu-Au-Mo deposit, and through collaboration with the Pebble Limited Partnership, a range of geophysical and geochemical investigations was carried out in proximity to the deposit. The deposit is almost entirely concealed by tundra, glacial deposits, and post-mineralization volcanic rocks. The discovery of mineral resources beneath cover is becoming more important because most of the mineral resources at the surface have already been discovered. Research is needed to identify ways in which to assess for concealed mineral resources. This report presents the uninterpreted geophysical measurements and geochemical and mineralogical analytical data from samples collected during the summer field seasons from 2007 to 2010, and makes the data available in a single Geographic Information System (GIS) database.

Alaska↗
USGS2015

Airborne electromagnetic and magnetic survey data of the Paradox and San Luis Valleys, Colorado

In October 2011, the U.S. Geological Survey (USGS) contracted airborne magnetic and electromagnetic surveys of the Paradox and San Luis Valleys in southern Colorado, United States. These airborne geophysical surveys provide high-resolution and spatially comprehensive datasets characterizing the resistivity structure of the shallow subsurface of each survey region, accompanied by magnetic-field information over matching areas. These data were collected to provide insight into the distribution of groundwater brine in the Paradox Valley, the extent of clay aquitards in the San Luis Valley, and to improve our understanding of the geologic framework for both regions. This report describes these contracted surveys and releases digital data supplied under contract to the USGS.

Colorado↗