Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Engineering Analysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources
USGS2006

Annual dissolved nitrite plus nitrate and total phosphorous loads for the Susquehanna, St. Lawrence, Mississippi-Atchafalaya, and Columbia River basins, 1968-2004

Annual stream-water loads were calculated near the outlet of four of the larger river basins (Susquehanna, St. Lawrence, Mississippi-Atchafalaya, and Columbia) in the United States for dissolved nitrite plus nitrate (NO2 + NO3) and total phosphorus using LOADEST load estimation software. Loads were estimated for the period 1968-2004; although loads estimated for individual river basins and chemical constituent combinations typically were for shorter time periods due to limitations in data availability. Stream discharge and water-quality data for load estimates were obtained from the U.S. Geological Survey (USGS) with additional stream discharge data for the Mississippi-Atchafalaya River Basin from the U.S. Army Corps of Engineers. The loads were estimated to support national assessments of changes in stream nutrient loads that are periodically conducted by Federal agencies (for example, U.S. Environmental Protection Agency) and other water- and land-resource organizations. Data, methods, and results of load estimates are summarized herein; including World Wide Web links to electronic ASCII text files containing the raw data. The load estimates are compared to dissolved NO2 + NO3 loads for three of the large river basins from 1971 to 1998 that the USGS provided during 2001 to The H. John Heinz III Center for Science, Economics and the Environment (The Heinz Center) for a report The Heinz Center published during 2002. Differences in the load estimates are the result of using the most up-to-date monitoring data since the 2001 analysis, differences in how concentrations less than the reporting limit were handled by the load estimation models, and some errors and exclusions in the 2001 analysis datasets (which resulted in some inaccurate load estimates).

Open-File Report↗
USGS2011

Agricultural herbicide transport in a first-order intermittent stream, Nebraska, USA

The behavior of herbicides in surface waters is a function of many variables, including scale of the watershed, physical and chemical properties of the herbicide, physical and chemical properties of the soil, rainfall intensity, and time of year. In this study, the transport of 6 herbicides and 12 herbicide degradates was examined during the 2004 growing season in an intermediate-scale agricultural watershed (146 ha) that is drained by a first-order intermittent stream, and the mass load for each herbicide in the stream was estimated. The herbicide load during the first week of storm events after application ranged from 17% of annual load for trifluralin to 84% of annual load for acetochlor. The maximum weekly herbicide load in the stream was generally within the first 3 weeks after application for those compounds that were applied within the watershed during 2004, and later for herbicides not applied within the watershed during 2004 but still detected in the stream. The apparent dominant mode of herbicide transport in the stream-determined by analysis amongst herbicide and conservative ion concentrations at different points in the hydrograph and in base flow samples-was either overland runoff or shallow subsurface flow, depending on the elapsed time after application and type of herbicide. The load as a percentage of use (LAPU) for the parent compounds in this study was similar to literature values for those compounds applied by the farmer within the watershed, but smaller for those herbicides that had rainfall as their only source within the watershed.

Nebraska↗
USGS2003

High-resolution topomapping of candidate MER landing sites with Mars Orbiter Camera narrow-angle images

We analyzed narrow‐angle Mars Orbiter Camera (MOC‐NA) images to produce high‐resolution digital elevation models (DEMs) in order to provide topographic and slope information needed to assess the safety of candidate landing sites for the Mars Exploration Rovers (MER) and to assess the accuracy of our results by a variety of tests. The mapping techniques developed also support geoscientific studies and can be used with all present and planned Mars‐orbiting scanner cameras. Photogrammetric analysis of MOC stereopairs yields DEMs with 3‐pixel (typically 10 m) horizontal resolution, vertical precision consistent with ∼0.22 pixel matching errors (typically a few meters), and slope errors of 1–3°. These DEMs are controlled to the Mars Orbiter Laser Altimeter (MOLA) global data set and consistent with it at the limits of resolution. Photoclinometry yields DEMs with single‐pixel (typically ∼3 m) horizontal resolution and submeter vertical precision. Where the surface albedo is uniform, the dominant error is 10–20% relative uncertainty in the amplitude of topography and slopes after “calibrating” photoclinometry against a stereo DEM to account for the influence of atmospheric haze. We mapped portions of seven candidate MER sites and the Mars Pathfinder site. Safety of the final four sites (Elysium, Gusev, Isidis, and Meridiani) was assessed by mission engineers by simulating landings on our DEMs of “hazard units” mapped in the sites, with results weighted by the probability of landing on those units; summary slope statistics show that most hazard units are smooth, with only small areas of etched terrain in Gusev crater posing a slope hazard.

Journal of Geophysical Research E: Planets↗
USGS1976

Problems in shallow land disposal of solid low-level radioactive waste in the united states

Disposal of solid low-level wastes containing radionuclides by burial in shallow trenches was initiated during World War II at several sites as a method of protecting personnel from radiation and isolating the radionuclides from the hydrosphere and biosphere. Today, there are 11 principal shallow-land burial sites in the United States that contain a total of more than 1.4 million cubic meters of solid wastes contaminated with a wide variety of radionuclides. Criteria for burial sites have been few and generalized and have contained only minimal hydrogeologic considerations. Waste-management practices have included the burial of small quantities of long-lived radionuclides with large volumes of wastes contaminated with shorter-lived nuclides at the same site, thereby requiring an assurance of extremely long-time containment for the entire disposal site. Studies at 4 of the 11 sites have documented the migration of radionuclides. Other sites are being studied for evidence of containment failure. Conditions at the 4 sites are summarized. In each documented instance of containment failure, ground water has probably been the medium of transport. Migrating radionuclides that have been identified include 90 Sr, 137 Cs, 106 Ru, 239 Pu, 125 Sb, 60 Co, and 3 H. Shallow land burial of solid wastes containing radionuclides can be a viable practice only if a specific site satisfies adequate hydrogeologic criteria. Suggested hydrogeologic criteria and the types of hydrogeologic data necessary for an adequate evaluation of proposed burial sites are given. It is mandatory that a concomitant inventory and classification be made of the longevity, and the physical and chemical form of the waste nuclides to be buried, in order that the anticipated waste types can be matched to the containment capability of the proposed sites. Ongoing field investigations at existing sites will provide data needed to improve containment at these sites and help develop hydrogeologic criteria for new sites. These studies have necessitated the development of special drilling, sampling, well construction, and testing techniques. A recent development in borehole geophysical techniques is downhole spectral gammaray analysis which not only locates but identifies specific radionuclides in the subsurface. Field investigations are being supplemented by laboratory studies of the hydrochemistry of the transuranic elements, the kinetics of solid-liquid phase interactions, and the potential complexing of radionuclides with organic compounds and solvents which mobilize normally highly sorbable nuclides. Theoretical studies of digital predictive solute transport models are being implemented to assure their availability for application to problems and processes identified in the field and laboratory.

Bulletin of the International Association of Engin↗
USGS1979

United States Geological Survey Yearbook, fiscal year 1978

Fiscal year 1978 saw the U.S. Geological Survey continuing to perform its basic historical missions of collecting, analyzing, and disseminating information about the Earth, its processes, and its water and mineral resources. Classifying Federal lands and supervising lessee mineral extraction operations on those lands were also major Survey concerns during the year. In addition, substantial progress was made in the exploration and assessment of the petroleum potential of the National Petroleum Reserve in Alaska, a recently assigned mission. These basic missions found expression in a wide range of program activities and interests as diverse as the sands of Mars and the volcanoes of Hawaii. Programs included assessment of numerous potential energy and mineral resources, study of earthquakes and other geologic hazards, appraisal of the magnitude and quality of the Nation's water resources, and supervision of lease operations on Federal lands. The Survey also was involved in developing data on land use and producing topographic, geologic, and hydrologic maps for public and private use. In cooperation with other Federal agencies, the Survey participated in studies under the U.S. Climate Program and continued its analysis of data received from the two Viking landers on the surface of Mars. On April 3, 1978, Dr. H. William Menard became the 10th Director of the U.S. Geological Survey. Dr. Menard, who, until his appointment, was Professor of Geology at the Scripps Institution of Oceanography, San Diego, Calif., brings to the Director's post the experience gained in a long and successful career as a marine geologist and oceanographer. He succeeds Dr. Vincent E. McKelvey, who continues with the Survey as a senior research scientist.

Yearbook↗
USGS2013

Improving predictive power of physically based rainfall-induced shallow landslide models: a probablistic approach

Distributed models to forecast the spatial and temporal occurrence of rainfall-induced shallow landslides are deterministic. These models extend spatially the static stability models adopted in geotechnical engineering and adopt an infinite-slope geometry to balance the resisting and the driving forces acting on the sliding mass. An infiltration model is used to determine how rainfall changes pore-water conditions, modulating the local stability/instability conditions. A problem with the existing models is the difficulty in obtaining accurate values for the several variables that describe the material properties of the slopes. The problem is particularly severe when the models are applied over large areas, for which sufficient information on the geotechnical and hydrological conditions of the slopes is not generally available. To help solve the problem, we propose a probabilistic Monte Carlo approach to the distributed modeling of shallow rainfall-induced landslides. For the purpose, we have modified the Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability Analysis (TRIGRS) code. The new code (TRIGRS-P) adopts a stochastic approach to compute, on a cell-by-cell basis, transient pore-pressure changes and related changes in the factor of safety due to rainfall infiltration. Infiltration is modeled using analytical solutions of partial differential equations describing one-dimensional vertical flow in isotropic, homogeneous materials. Both saturated and unsaturated soil conditions can be considered. TRIGRS-P copes with the natural variability inherent to the mechanical and hydrological properties of the slope materials by allowing values of the TRIGRS model input parameters to be sampled randomly from a given probability distribution. The range of variation and the mean value of the parameters can be determined by the usual methods used for preparing the TRIGRS input parameters. The outputs of several model runs obtained varying the input parameters are analyzed statistically, and compared to the original (deterministic) model output. The comparison suggests an improvement of the predictive power of the model of about 10% and 16% in two small test areas, i.e. the Frontignano (Italy) and the Mukilteo (USA) areas, respectively. We discuss the computational requirements of TRIGRS-P to determine the potential use of the numerical model to forecast the spatial and temporal occurrence of rainfall-induced shallow landslides in very large areas, extending for several hundreds or thousands of square kilometers. Parallel execution of the code using a simple process distribution and the Message Passing Interface (MPI) on multi-processor machines was successful, opening the possibly of testing the use of TRIGRS-P for the operational forecasting of rainfall-induced shallow landslides over large regions.

Geoscientific Model Development and Discussions↗
USGS2012

Including foreshocks and aftershocks in time-independent probabilistic seismic hazard analyses

Time‐independent probabilistic seismic‐hazard analysis treats each source as being temporally and spatially independent; hence foreshocks and aftershocks, which are both spatially and temporally dependent on the mainshock, are removed from earthquake catalogs. Yet, intuitively, these earthquakes should be considered part of the seismic hazard, capable of producing damaging ground motions. In this study, I consider the mainshock and its dependents as a time‐independent cluster, each cluster being temporally and spatially independent from any other. The cluster has a recurrence time of the mainshock; and, by considering the earthquakes in the cluster as a union of events, dependent events have an opportunity to contribute to seismic ground motions and hazard. Based on the methods of the U.S. Geological Survey for a high‐hazard site, the inclusion of dependent events causes ground motions that are exceeded at probability levels of engineering interest to increase by about 10% but could be as high as 20% if variations in aftershock productivity can be accounted for reliably.

Bulletin of the Seismological Society of America↗
USGS2024

Application of a workflow to determine the feasibility of using simulated streamflow for estimation of streamflow frequency statistics

Streamflow records from hydrologic models are attractive for use in operational hydrology, such as a streamflow frequency analysis. The amount of bias inherent to simulated streamflow from hydrologic models is often unknown, but it is likely present in derivative products. Therefore, a workflow may help determine where streamflow frequency analysis is credibly feasible from simulated streamflow and allow for a systematic way to assess and correct for bias. The proposed workflow consists of hydrologically matching model output locations with streamflow-gauging station (stream gauge) locations, computing the desired statistic from the simulated and observed streamflow record, computing the differences between the simulated and observed statistic (i.e., the bias), and constructing generalized additive models (GAMs) from the differences to determine bias corrections. The US Geological Survey, in cooperation with the Gulf Coast Ecosystem Restoration Council and the US Environmental Protection Agency, is testing the proposed workflow on a low-streamflow frequency (LFF) analysis. Simulated streamflows for the LFF analysis were sourced from a machine-learning model that estimated daily streamflow at Level-12 hydrologic unit code (HUC12) pour points (outlets) in the southern and southeastern US for 1950–2010. The comparison data set consists of 497 stream gauges that are coincident with a HUC12 outlet. The simulated LFF statistics were being overestimated on average; thus, there are limits to using simulated streamflow for frequency analysis. The magnitude of the overprediction generally increases where no-flow conditions are common. Bias corrections determined from the GAMs decreased the magnitude of bias observed in the simulated LFF statistics on average, suggesting it is feasible to expand the operational use of simulated streamflows to frequency analyses with the proposed workflow. The proposed workflow could be advantageous to practitioners interested in leveraging existing and future simulated streamflow data sets with regional and or global coverage.

Journal of Hydrologic Engineering↗
USGS2006

Historical record of Landsat global coverage

The long-term, 34+ year record of global Landsat remote sensing data is a critical resource to study the Earth system and human impacts on this system. The National Satellite Land Remote Sensing Data Archive (NSLRSDA) is charged by public law to: “maintain a permanent, comprehensive Government archive of global Landsat and other land remote sensing data for long-term monitoring and study of the changing global environment” (U.S. Congress, 1992). The advisory committee for NSLRSDA requested a detailed analysis of observation coverage within the U.S. Landsat holdings, as well as that acquired and held by International Cooperator (IC) stations. Our analyses, to date, have found gaps of varying magnitude in U.S. holdings of Landsat global coverage data, which appear to reflect technical or administrative variations in mission operations. In many cases it may be possible to partially fill these gaps in U.S. holdings through observations that were acquired and are now being held at International Cooperator stations.

Photogrammetric Engineering and Remote Sensing↗
USGS1989

IRIS/USGS plans for upgrading the Global Seismograph Network

This report has been prepared to provide information to organizations that may be asked to participate in a program to upgrade the global seismographic network. In most cases, the organizations that will be offered new instrumentation by the U.S. Geological Survey currently operate stations in the World-Wide Standardized Seismograph Network (WWSSN) or the Global Digital Seismograph Network (GDSN). The deployment of the WWSSN in the 1960's and the subsequent equipping of some WWSSN stations with digital equipment and borehole seismometers during the 1970's has been a remarkably successful program that generated the high- quality data needed to fuel an unprecedented period of progress in earthquake and tectonic research. The success of the WWSSN can be attributed to the importance of the data, to the strong commitment by participating organizations to international scientific cooperation, to the dedication and skill of the station operators, and to the resourcefulness of the staff supporting the network. Benefits have been widespread. The community of scientists world-wide has benefited from unrestricted access to a standardized base of calibrated data, and the participating stations have benefited from the donation of modern observatory instruments that have been useful for local earthquake studies and for the training of scientists and engineers. Now, an exciting opportunity has arisen to deploy a new generation of seismograph systems to replace the outdated equipment at many of the WWSSN and GDSN stations. The U.S. Geological Survey (USGS) is cooperating with the Incorporated Research Institutions for Seismology (IRIS) in a program to upgrade the global seismograph network. The equipment development phase is nearly complete with a prototype of the new broadband seismograph system currently undergoing final testing at the USGS Albuquerque Seismological Laboratory. Deployment of the new equipment is expected to begin in early 1990. As this report will demonstrate, the IRIS broadband seismograph system combines the very latest data acquisition and computer technology to produce seismic data with unprecedented bandwidth and dynamic range. Moreover, the system has been designed so that the high-quality digital data are accessible for local display and analysis. The functional design of the new system, which uses off-the-shelf modules and a standard computer bus, will make it much easier than it has been in the past to modify and upgrade the data acquisition system as improvements in technology become available. With adequate support for the program, the new IRIS seismograph system need never become obsolete. We want you to be aware of our plans and the possibility that you may be asked to participate in this ,program. The schedule for upgrading WWSSN and GDSN stations depends on the level of funding earmarked for the program by our National Science Foundation. We hope to deploy at least ten new GSN data systems each year. If you have any questions concerning this program, please contact the Albuquerque Seismological Laboratory, U.S. Geological Survey, Albuquerque, New Mexico 87115-5000. This report was revised in February 1992 in order to update information concerning the current program and instrumentation. The amp in Figure 1 was revised in June 1993, April 1994, December 1994, and September 1996 to reflect updated siting information. In September 1996 a composite photo of standard and optional components of the IRIS-2 GSN system hardware was added as a separate page between Figures 9 and 10.

Open-File Report↗
USGS2019

Flood-frequency comparison from 1995 to 2016 and trends in peak streamflow in Arkansas, water years 1930–2016

In 2016, the U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers and the Federal Emergency Management Agency, began a study in Arkansas to investigate possible increasing trends in annual peak streamflow data and the possible resulting increase in the annual exceedance probability flood (AEPF) predictions. Temporal trends of peak streamflow were investigated at 15 selected streamgages on unregulated streams in Arkansas having 30 or more years of peak streamflow data through the 2016 water year. For the period of record at each streamgage, the Mann-Kendall trend test indicated that 14 of the 15 streamgages had no statistically significant peak streamflow trends and 1 streamgage had a statistically significant decreasing peak streamflow trend. Visual examination of the locally estimated scatterplot smoothing technique trend lines of the peak streamflow data indicated a possible increasing peak streamflow trend at 8 of the 15 streamgages since the 1990s. A sequential series analysis of the 1-percent AEPF at each of the 15 selected streamgages was completed by selecting an initial subset of the oldest peak streamflow data from each site to estimate the initial 1-percent AEPF. This initial peak streamflow data subset was subsequently appended with 10-year increments of additional peak streamflow data until the full period of peak streamflow data was analyzed. The maximum increase in the 1-percent AEPF was 113 percent, and the maximum decrease was 31.9 percent. Percentage differences between the AEPFs derived from regional regression equations presented in the 1995 and 2016 Arkansas flood-frequency reports were compared. The average percentage differences for the 74 selected locations indicate that the 4-, 2-, 1-, and 0.2-percent AEPFs computed using the 2016 regional regression equations were higher by 3.52, 5.10, 8.59, and 13.31 percent, respectively (25-, 50-, 100-, and 500-year recurrence interval floods), than the same percentage AEPFs computed using the 1995 regional regression equations. The average percentage differences between the 1995 and 2016 AEPFs for the 10-percent AEPF (10-year recurrence interval flood) resulted in 2016 AEPF predictions being 0.41 percent higher. For the 50- and 20-percent AEPFs (2- and 5-year recurrence interval floods), the 2016 AEPFs were less than the 1995 AEPFs by 2.53 and 0.31 percent, respectively.

Arkansas↗
USGS2020

Regional regression equations for estimation of four hydraulic properties of streams at approximate bankfull conditions for different ecoregions in Texas

The U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, assessed statistical relations between hydraulic properties of streams at approximate bankfull conditions for different ecological regions (ecoregions) in Texas. Data from more than 103,000 records of measured discharge and ancillary hydraulic properties were assembled from summaries of discharge measurements for 424 U.S. Geological Survey streamgages in Texas. The data were subsequently subsetted at each streamgage for a streamgage-specific discharge interval centered on the estimated median annual peak discharge (0.5 annual exceedance probability) obtained from previously published regional regression equations in Texas in conjunction with the streamgage-specific sample median annual peak discharge for the period of record for each streamgage. Discharge measurements at gaged locations representing bankfull conditions (approximated from a discharge interval centered on the estimated median annual peak discharge at a given site) and associated watershed properties were subjected to rigorous statistical analysis. For most discharge measurements (where discharge is symbolically represented as Q ), the following hydraulic properties are available: cross-section area ( A ), water-surface top width ( B ), and reported mean velocity ( V ). Statewide summary statistics were computed by using these four hydraulic properties ( Q , A , B , and V ) and the following five watershed properties: (1) watershed area (contributing drainage area), (2) a multiple of main-channel slope (1,000 times main-channel slope), (3) mean annual precipitation, (4) drainage density, and (5) sinuosity ratio. From the initial set of 424 streamgages, summary statistics were computed for 372 selected streamgages in Texas and constitute the subsetted measurements dataset described in this report. Eight of the 10 ecoregions in Texas are represented in the statewide summary statistics. The resulting statistical relations, expressed as regression equations, can be used to estimate cross-section area, water-surface top width, discharge, and mean velocity of streams in different Texas ecoregions, at approximate bankfull conditions. In the regression equations, watershed properties were the independent variables for applicable watersheds, and predictions from the equations might be useful for estimating the four hydraulic properties at ungaged or unmonitored locations from selected characteristics measured at both the ungaged locations and gaged locations. Four regression equations to estimate the four hydraulic properties were identified as the preferred equations from this study. The four preferred equations use watershed area, mean annual precipitation, and aggregated ecoregion (treated as a categorical variable) to estimate the hydraulic properties, and justification is provided for this preference. For the four equations, the proportions of variance explained by the regression equations as measured by Nash-Sutcliffe efficiency are about 71 percent for cross-section area, 36 percent for top width, 76 percent for discharge, and 25 percent for mean velocity. Residual standard error (RSEs) of the regression equations are 0.252 log10 square feet for cross-section area, 0.319 log10 feet for top width, 0.247 log10 cubic feet per second for discharge, and 0.190 log10 feet per second for mean velocity, and the corresponding standard deviations of response are 0.465 log10 square feet, 0.397 log10 feet, 0.507 log10 cubic feet per second, and 0.220 log10 feet per second, respectively. The residual standard errors are less than the standard deviations as anticipated but show that the uncertainty reduction (percent change) for cross-section area is about −46 percent, about −20 percent for top width, about −51 percent for discharge, and about −14 percent for mean velocity.

Texas↗
USGS1996

Hydrologic evaluation methodology for estimating water movement through the unsaturated zone at commercial low-level radioactive waste disposal site

This report identifies key technical issues related to hydrologic assessment of water flow in the unsaturated zone at low-level radioactive waste (LLW) disposal facilities. In addition, a methodology for incorporating these issues in the performance assessment of proposed LLW disposal facilities is identified and evaluated. The issues discussed fall into four areas: Estimating the water balance at a site (i.e., infiltration, runoff, water storage, evapotranspiration, and recharge); Analyzing the hydrologic performance of engineered components of a facility; Evaluating the application of models to the prediction of facility performance; and Estimating the uncertainty in predicted facility performance. An estimate of recharge at a LLW site is important since recharge is a principal factor in controlling the release of contaminants via the groundwater pathway. The most common methods for estimating recharge are discussed in Chapter 2. Many factors affect recharge; the natural recharge at an undisturbed site is not necessarily representative either of the recharge that will occur after the site has been disturbed or of the flow of water into a disposal facility at the site. Factors affecting recharge are discussed in Chapter 2. At many sites engineered components are required for a LLW facility to meet performance requirements. Chapter 3 discusses the use of engineered barriers to control the flow of water in a LLW facility, with a particular emphasis on cover systems. Design options and the potential performance and degradation mechanisms of engineered components are also discussed. Water flow in a LLW disposal facility must be evaluated before construction of the facility. In addition, hydrologic performance must be predicted over a very long time frame. For these reasons, the hydrologic evaluation relies on the use of predictive modeling. In Chapter 4, the evaluation of unsaturated water flow modeling is discussed. A checklist of items is presented to guide the evaluation. Several computer simulation codes that were used in the examples (Chapter 6) are discussed with respect to this checklist. The codes used include HELP, UNSAT-H, and VAM3DCG. To provide a defensible estimate of water flow in a LLW disposal facility, the uncertainty associated with model predictions must be considered. Uncertainty arises because of the highly heterogeneous nature of most subsurface environments and the long time frame required in the analysis. Sources of uncertainty in hydrologic evaluation of the unsaturated zone and several approaches for analysis are discussed in Chapter 5. The methods of analysis discussed include a bounding approach, sensitivity analysis, and Monte Carlo simulation. To illustrate the application of the discussion in Chapters 2 through 5, two examples are presented in Chapter 6. The first example is of a below ground vault located in a humid environment. The second example looks at a shallow land burial facility located in an arid environment. The examples utilize actual site-specific data and realistic facility designs. The two examples illustrate the issues unique to humid and arid sites as well as the issues common to all LLW sites. Strategies for addressing the analytical difficulties arising in any complex hydrologic evaluation of the unsaturated zone are demonstrated. The report concludes with some final observations and recommendations.

Report↗
USGS2014

Experimental test of theory for the stability of partially saturated vertical cut slopes

This paper extends Culmann's vertical-cut analysis to unsaturated soils. To test the extended theory, unsaturated sand was compacted to a uniform porosity and moisture content in a laboratory apparatus. A sliding door that extended the height of the free face of the slope was lowered until the vertical cut failed. Digital images of the slope cross section and upper surface were acquired concurrently. A recently developed particle image velocimetry (PIV) tool was used to quantify soil displacement. The PIV analysis showed strain localization at varying distances from the sliding door prior to failure. The areas of localized strain were coincident with the location of the slope crest after failure. Shear-strength and soil-water-characteristic parameters of the sand were independently tested for use in extended analyses of the vertical-cut stability and of the failure plane angle. Experimental failure heights were within 22.3% of the heights predicted using the extended theory.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2003

Seismic response analysis of an instrumented building structure

The Sheraton - Universal hotel, an instrumented building lying in North Hollywood, USA is selected for case study in this paper. The finite element method is used to produce a linear time - invariant structural model, and the SAP2000 program is employed for the time history analysis of the instrumented structure under the base excitation of strong motions recorded in the basement during the Northridge, California earthquake of 17 January 1994. The calculated structural responses are compared with the recorded data in both time domain and frequency domain, and the effects of structural parameters evaluation and indeterminate factors are discussed. Some features of structural response, such as the reason why the peak responses of acceleration in the ninth floor are larger than those in the sixteenth floor, are also explained.

Earthquake Engineering and Engineering Vibration↗
USGS2018

Assessing the impacts of dams and levees on the hydrologic record of the Middle and Lower Mississippi River, USA

The impacts of dams and levees on the long-term (>130 years) discharge record was assessed along a ~1200 km segment of the Mississippi River between St. Louis, Missouri, and Vicksburg, Mississippi. To aid in our evaluation of dam impacts, we used data from the U.S. National Inventory of Dams to calculate the rate of reservoir expansion at five long-term hydrologic monitoring stations along the study segment. We divided the hydrologic record at each station into three periods: (1) a pre-rapid reservoir expansion period; (2) a rapid reservoir expansion period; and (3) a post-rapid reservoir expansion period. We then used three approaches to assess changes in the hydrologic record at each station. Indicators of hydrologic alteration (IHA) and flow duration hydrographs were used to quantify changes in flow conditions between the pre- and post-rapid reservoir expansion periods. Auto-regressive interrupted time series analysis (ARITS) was used to assess trends in maximum annual discharge, mean annual discharge, minimum annual discharge, and standard deviation of daily discharges within a given water year. A one-dimensional HEC-RAS hydraulic model was used to assess the impact of levees on flood flows. Our results revealed that minimum annual discharges and low-flow IHA parameters showed the most significant changes. Additionally, increasing trends in minimum annual discharge during the rapid reservoir expansion period were found at three out of the five hydrologic monitoring stations. These IHA and ARITS results support previous findings consistent with the observation that reservoirs generally have the greatest impacts on low-flow conditions. River segment scale hydraulic modeling revealed levees can modestly increase peak flood discharges, while basin-scale hydrologic modeling assessments by the U.S. Army Corps of Engineers showed that tributary reservoirs reduced peak discharges by a similar magnitude (2 to 30%). This finding suggests that the effects of dams and levees on peak flood discharges are in part offsetting one another along the modeled river segments and likely other substantially leveed segments of the Mississippi River.

Mississippi River↗
USGS1996

Quality-assurance plan for water-resources activities of the U.S. Geological Survey in Idaho

To ensure continued confidence in its products, the Water Resources Division of the U.S. Geological Survey implemented a policy that all its scientific work be performed in accordance with a centrally managed quality-assurance program. This report establishes and documents a formal policy for current (1995) quality assurance within the Idaho District of the U.S. Geological Survey. Quality assurance is formalized by describing district organization and operational responsibilities, documenting the district quality-assurance policies, and describing district functions. The districts conducts its work through offices in Boise, Idaho Falls, Twin Falls, Sandpoint, and at the Idaho National Engineering Laboratory. Data-collection programs and interpretive studies are conducted by two operating units, and operational and technical assistance is provided by three support units: (1) Administrative Services advisors provide guidance on various personnel issues and budget functions, (2) computer and reports advisors provide guidance in their fields, and (3) discipline specialists provide technical advice and assistance to the district and to chiefs of various projects. The district's quality-assurance plan is based on an overall policy that provides a framework for defining the precision and accuracy of collected data. The plan is supported by a series of quality-assurance policy statements that describe responsibilities for specific operations in the district's program. The operations are program planning; project planning; project implementation; review and remediation; data collection; equipment calibration and maintenance; data processing and storage; data analysis, synthesis, and interpretation; report preparation and processing; and training. Activities of the district are systematically conducted under a hierarchy of supervision an management that is designed to ensure conformance with Water Resources Division goals quality assurance. The district quality-assurance plan does not describe detailed technical activities that are commonly termed "quality-control procedures." Instead, it focuses on current policies, operations, and responsibilities that are implemented at the management level. Contents of the plan will be reviewed annually and updated as programs and operations change.

Idaho↗
USGS2013

Evaluation of the potential for hysteresis in index-velocity ratings for the Chicago Sanitary and Ship Canal near Lemont, Illinois

The U.S. Geological Survey (USGS) is responsible for monitoring flows in the Chicago Sanitary and Ship Canal (CSSC) near Lemont, Illinois, as a part of the Lake Michigan Diversion Accounting overseen by the U.S. Army Corps of Engineers, Chicago District. Lake Michigan Diversion Accounting is mandated by a U.S. Supreme Court decree in order to monitor, and limit, the State of Illinois’ annual diversion of Great Lakes water through the manmade CSSC. Every 5 years, a technical review committee consisting of practicing engineers and academics reviews USGS streamgaging practices in the CSSC near Lemont, Illinois. The sixth technical review committee expressed concern that the index-velocity rating—the method used to estimate mean cross-sectional velocity from a measured index velocity—may be subject to hysteresis at this site because of the unique, unsteady hydraulics of the canal. Hysteresis in index-velocity ratings can occur at sites where the flow distribution in the channel varies significantly between the rising and falling limbs of the hydrograph for the same discharge. Presently, hysteresis in index-velocity ratings has been documented only in tidally affected sites. This report investigates whether hysteresis can occur at this nontidal site, and the conditions under which it is likely to occur, by using both a theoretical approach and a three-dimensional hydrodynamic model. The theoretical analysis investigated the conditions required for hysteresis in the index-velocity rating, and the modeling analysis focused on the effect of the timing of the inflows from the CSSC and the Cal-Sag Channel on the potential for hysteresis and whether highly resolved simulations of actual high-flow events show any evidence of hysteresis. Based on both a theoretical analysis using observed historical data and an analysis using a three-dimensional hydrodynamic model, there is no conclusive evidence for the existence of hysteresis in the index-velocity rating at the USGS streamgage on the CSSC near Lemont, Illinois. Although the theoretical analysis indicated the possibility of hysteresis at this site, the hydrodynamic conditions required to generate hysteresis are not present at this site based on historical data. Ongoing streamgaging practices at this site will use the information in this report and include periodic assessment of the index-velocity rating for any signs of hysteresis that might result from future changes to the operation of this manmade canal.

Illinois↗