Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Contribution”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources
USGS2007

Simulation of the effects of water withdrawals, wastewater-return flows, and land-use change on streamflow in the Blackstone River basin, Massachusetts and Rhode Island

Streamflow in many parts of the Blackstone River Basin in south-central Massachusetts and northern Rhode Island is altered by water-supply withdrawals, wastewater-return flows, and land-use change associated with a growing population. Simulations from a previously developed and calibrated Hydrological Simulation Program—FORTRAN (HSPF) precipitation-runoff model for the basin were used to evaluate the effects of water withdrawals, wastewater-return flows, and land-use change on streamflow. Most of the simulations were done for recent (1996–2001) conditions and potential buildout conditions in the future when all available land is developed to provide a long-range assessment of the effects of possible future human activities on water resources in the basin. The effects of land-use change were evaluated by comparing the results of long-term (1960–2004) simulations with (1) undeveloped land use, (2) 1995–1999 land use, and (3) potential buildout land use at selected sites across the basin. Flow-duration curves for these land-use scenarios were similar, indicating that land-use change, as represented in the HSPF model, had little effect on flow in the major tributary streams and rivers in the basin. However, land-use change—particularly increased effective impervious area—could potentially have greater effects on the hydrology, water quality, and aquatic habitat of the smaller streams in the basin. The effects of water withdrawals and wastewater-return flows were evaluated by comparing the results of long-term simulations with (1) no withdrawals and return flows, (2) actual (measured) 1996–2001 withdrawals and wastewater-return flows, and (3) potential withdrawals and wastewater-return flows at buildout. Overall, the results indicated that water use had a much larger effect on streamflow than did land use, and that the location and magnitude of wastewater-return flows were important for lessening the effects of withdrawals on streamflow in the Blackstone River Basin. Ratios of long-term (1960–2004) simulated flows with 1996–2001 water use (representing the net effect of withdrawals and wastewater-return flows) to long-term simulated flows with no water use indicated that, for many reaches, 1996–2001 water use did not deplete flows at the 90-percent flow duration substantially compared to flows unaffected by water use. Flows generally were more severely depleted in the reaches that include surface-water supplies for the larger cities in the basin (Kettle and Tatnuck Brooks, Worcester, Mass. water supply; Quinsigamond River, Shrewsbury, Mass. water supply; Crookfall Brook, Woonsocket, R.I. water supply; and Abbott Run, Pawtucket, R.I. water supply). These reaches did not have substantial wastewater-return flows that could offset the effects of the withdrawals. In contrast, wastewater-return flows from the Upper Blackstone Wastewater Treatment Facility in Millbury, Mass. increased flows at the 90-percent flow duration in the main stem of the Blackstone River compared to no-water-use conditions. Under the assumptions used to develop the buildout scenario, nearly all of the new water withdrawals were returned to the Blackstone River Basin at municipal wastewater-treatment plants or on-site septic systems. Consequently, buildout generally had small effects on simulated low flows in the Blackstone River and most of the major tributary streams compared to flows with 1996–2001 water use. To evaluate the effects of water use on flows in the rivers and major tributary streams in the Rhode Island part of the basin in greater detail, the magnitudes of water withdrawals and wastewater-return flows in relation to simulated streamflow were calculated as unique ratios for individual HSPF subbasins, total contributing areas to HSPF subbasins, and total contributing areas to the major tributary streams. For recent conditions (1996–2001 withdrawals and 1995–1999 land use), ratios of average summer (June through September) withdrawals to the long-term (1960–2004) medians of average summer streamflow simulated in the absence of water use ranged from 0.039 to 2.5 with a median value of 0.11 for total contributing areas to HSPF subbasins. The largest ratios of withdrawal rates to streamflow were for Crookfall Brook and Abbott Run, the subbasins with major withdrawals for municipal water supply. The smallest ratios were for the rural subbasins in the Branch River drainage area in the southwestern part of the basin. For recent conditions, ratios of average summer wastewater-return flows to average summer streamflows ranged from 0.0 to 0.20 with a median value of 0.029 for total contributing areas to HSPF subbasins. The largest ratios of wastewater-return flows to streamflows were for the subbasins that contained return flows from municipal wastewater-treatment plants and the subbasins along the Blackstone River because of high wastewater-return-flow rates from upstream facilities. Under the assumptions used to develop the buildout analysis, withdrawal and return-flow ratios were estimated to increase for most of the HSPF subbasins in the Rhode Island part of the basin. Ratios more than doubled for some subbasins, but the large increases mainly were for subbasins that had low ratios in 1996–2001. The HSPF model also was used to estimate the effects of water-conservation measures on low flows in rivers and major tributary streams in the Rhode Island part of the basin, the contribution of wastewater-return flows to streamflow in the Blackstone River, and the effects of changes to two local water supplies in Rhode Island. Water-conservation measures were evaluated by reducing 1996–2001 withdrawals by 20 percent. Simulations with 20-percent reductions in withdrawal rates indicated that conservation measures would result in appreciable increases in low flows in the subbasins with the highest withdrawal rates in the Rhode Island part of the Blackstone River Basin, whereas the effects on streamflow would be much less pronounced in subbasins with lower withdrawal rates. The contribution of wastewater-return flows to streamflow in the Blackstone River was evaluated by comparing simulated flows with and without municipal wastewater-return flows. Under typical summer low-flow conditions, treated wastewater was a major component of streamflow (35 to 50 percent) in the Blackstone River, and the percentage of treated wastewater was larger during the driest periods. The simulations conducted to evaluate changes to local water supplies (effects of potential withdrawals from an inactive well adjacent to Slatersville Reservoir in North Smithfield on flows in the Branch River, and the effects of connecting the town of North Smithfield to the water-supply system for the city of Woonsocket, Rhode Island) indicated that each of these activities would alter low flows only slightly in the associated stream reaches.

Massachusetts, Rhode Island↗
USGS2013

Sources and characteristics of organic matter in the Clackamas River, Oregon, related to the formation of disinfection by-products in treated drinking water

This study characterized the amount and quality of organic matter in the Clackamas River, Oregon, to gain an understanding of sources that contribute to the formation of chlorinated and brominated disinfection by-products (DBPs), focusing on regulated DBPs in treated drinking water from two direct-filtration treatment plants that together serve approximately 100,000 customers. The central hypothesis guiding this study was that natural organic matter leaching out of the forested watershed, in-stream growth of benthic algae, and phytoplankton blooms in the reservoirs contribute different and varying proportions of organic carbon to the river. Differences in the amount and composition of carbon derived from each source affects the types and concentrations of DBP precursors entering the treatment plants and, as a result, yield varying DBP concentrations and species in finished water. The two classes of DBPs analyzed in this study-trihalomethanes (THMs) and haloacetic acids (HAAs)-form from precursors within the dissolved and particulate pools of organic matter present in source water. The five principal objectives of the study were to (1) describe the seasonal quantity and character of organic matter in the Clackamas River; (2) relate the amount and composition of organic matter to the formation of DBPs; (3) evaluate sources of DBP precursors in the watershed; (4) assess the use of optical measurements, including in-situ fluorescence, for estimating dissolved organic carbon (DOC) concentrations and DBP formation; and (5) assess the removal of DBP precursors during treatment by conducting treatability "jar-test" experiments at one of the treatment plants. Data collection consisted of (1) monthly sampling of source and finished water at two drinking-water treatment plants; (2) event-based sampling in the mainstem, tributaries, and North Fork Reservoir; and (3) in-situ continuous monitoring of fluorescent dissolved organic matter (FDOM), turbidity, chlorophyll- a , and other constituents to continuously track source-water conditions in near real-time. Treatability tests were conducted during the four event-based surveys to determine the effectiveness of coagulant and powdered activated carbon (PAC) on the removal of DBP precursors. Sample analyses included DOC, total particulate carbon (TPC), total and dissolved nutrients, absorbance and fluorescence spectroscopy, and, for regulated DBPs, concentrations of THMs and HAAs in finished water and laboratory-based THM and HAA formation potentials (THMFP and HAAFP, respectively) for source water and selected locations throughout the watershed. The results of this study may not be typical given the record and near record amounts of precipitation that occurred during spring that produced streamflow much higher than average in 2010-11. Although there were algal blooms, lower concentrations of chlorophyll- a were observed in the water column during the study period compared to historical data. Concentrations of DBPs in finished (treated) water averaged 0.024 milligrams per liter (mg/L) for THMs and 0.022 mg/L for HAAs; maximum values were about 0.040 mg/L for both classes of DBPs. Although DBP concentrations were somewhat higher within the distribution system, none of the samples collected for this study or for the quarterly compliance monitoring by the water utilities exceeded levels permissible under existing U.S. Environmental Protection Agency (USEPA) regulations: 0.080 mg/L for THMs and 0.060 mg/L for HAAs. DOC concentrations were generally low in the Clackamas River, typically about 1.0-1.5 mg/L. Concentrations in the mainstem occasionally increased to nearly 2.5 mg/L during storms; DOC concentrations in tributaries were sometimes much higher (up to 7.8 mg/L). The continuous in-situ FDOM measurements indicated sharp rises in DOC concentrations in the mainstem following rainfall events; concentrations were relatively stable during summer base flow. Even though the first autumn storm mobilized appreciable quantities of carbon, higher concentrations of DBPs in finished water were observed 3-weeks later, after the ground was saturated from additional rainfall. The majority of the DOC in the lower Clackamas River appears to originate from the upper basin, suggesting terrestrial carbon was commonly the dominant source. Lower-basin tributaries typically contained the highest concentrations of DOC and DBP precursors and contributed substantially to the overall loads in the mainstem during storms. During low-flow periods, tributaries were not major sources of DOC or DBP precursors to the Clackamas River. Although the dissolved fraction of organic carbon contributed the majority of DBP precursors, at times the particulate fraction (inorganic sediment and organic particles including detritus and algal material) contributed a substantial fraction of DBP precursors. Considering just the main-stem sites, on average, 10 percent of THMFP and 32 percent of HAAFP were attributed to particulate carbon. This finding suggests water-treatment methods that remove particles prior to chlorination would reduce finished-water DBP concentrations to some degree. Overall, concentrations of THM and HAA precursors were closely linked to DOC concentrations; laboratory DBP formation potentials (DBPFPs) clearly showed that THMFP and HAAFP were greatest in the downstream tributaries that contained elevated carbon concentrations. However, carbon-normalized "specific" formation potentials for THMs and HAAs (STHMFP and SHAAFP, respectively) revealed changes in carbon character over time that affected the two types of DBP classes differently. HAA precursors were elevated in waters containing aromatic-rich soil-derived material arising from forested areas. In contrast, THM precursors were associated with carbon having a lower aromatic content; highest STHMFP occurred in autumn 2011 in the mainstem from North Fork Reservoir downstream to LO DWTP. This pattern suggests the potential for a link between THM precursors and algal-derived carbon. The highest STHMFP value was measured within North Fork Reservoir, indicating reservoir derived carbon may be important for this class of DBPs. Weak correlations between STHMFP and SHAAFP emphasize that precursor sources for these types of DBPs may be different. This highlights not only that different locations within the watershed produce carbon with different reactivity (specific DBPFP), but also that different management approaches for each class of DBP precursors could be required for control. Treatability tests conducted on source water during four basin-wide surveys demonstrated that an average of about 40 percent of DOC can be removed by coagulation. While the decrease in THMFP following coagulation was similar to DOC, the decrease in HAAFP was much greater (approximately 70 percent), indicating coagulation is particularly effective at removing HAA precursors'likely because of the aromatic nature of the carbon associated with HAA precursors. Several findings from this study have direct implications for managing drinking-water resources and for providing useful information that may help improve treatment-plant operations. For example, the use of in-situ fluorometers that measure FDOM provided an excellent proxy for DOC concentration in this system and revealed short-term, rapid changes in DOC concentration during storm events. In addition, the strong correlation between FDOM values measured in-situ and HAA5 concentrations in finished water may permit estimation of continuous HAA concentrations, as was done here. As part of this study, multiple in-situ FDOM sensors were deployed continuously and in real-time to characterize the composition of dissolved organic matter. Although the initial results were promising, additional research and engineering developments will be needed to demonstrate the full utility of these sensors for this purpose. In conclusion, although DBPFPs were strongly correlated to DOC concentration, some DBPs formed from particulate carbon, including terrestrial leaf material and algal material such as planktonic species of blue-green algae and sloughed filaments, stalks, and cells of benthic algae. Different precursor sources in the watershed were evident from the data, suggesting specific actions may be available to address some of these sources. In-situ measurements of FDOM proved to be an excellent proxy for DOC concentration as well as HAA formation during treatment, which suggests further development and refinement of these sensors have the potential to provide real-time information about complex watershed processes to operators at the drinking-water treatment plants. Follow-up studies could examine the relative roles that terrestrial and algal sources have on the DBP precursor pool to better understand how watershed-management activities may be affecting the transport of these compounds to Clackamas River drinking-water intakes. Given the low concentrations of algae in the water column during this study, additional surveys during more typical river conditions could provide a more complete understanding of how algae contribute DBP precursors. Further development of FDOM-sensor technology can improve our understanding of carbon dynamics in the river and how concentrations may be trending over time. This study was conducted in collaboration with Clackamas River Water and the City of Lake Oswego water utilities. Other research partners included Oregon Health and Science University in Hillsboro, Oregon, Alexin Laboratory in Tigard, Oregon, U.S. Geological Survey National Research Program Laboratory in Denver, Colorado, and the U.S. Geological Survey Water Science Centers in Portland, Oregon, and Sacramento, California. This project was supported with funding from Clackamas River Water, City of Lake Oswego, the U.S. Geological Survey, and the Water Research Foundation.

Oregon↗
USGS2013

Investigations of groundwater system and simulation of regional groundwater flow for North Penn Area 7 Superfund site, Montgomery County, Pennsylvania

Groundwater in the vicinity of several industrial facilities in Upper Gwynedd Township and vicinity, Montgomery County, in southeast Pennsylvania has been shown to be contaminated with volatile organic compounds (VOCs), the most common of which is the solvent trichloroethylene (TCE). The 2-square-mile area was placed on the National Priorities List as the North Penn Area 7 Superfund site by the U.S. Environmental Protection Agency (USEPA) in 1989. The U.S. Geological Survey (USGS) conducted geophysical logging, aquifer testing, and water-level monitoring, and measured streamflows in and near North Penn Area 7 from fall 2000 through fall 2006 in a technical assistance study for the USEPA to develop an understanding of the hydrogeologic framework in the area as part of the USEPA Remedial Investigation. In addition, the USGS developed a groundwater-flow computer model based on the hydrogeologic framework to simulate regional groundwater flow and to estimate directions of groundwater flow and pathways of groundwater contaminants. The study area is underlain by Triassic- and Jurassic-age sandstones and shales of the Lockatong Formation and Brunswick Group in the Mesozoic Newark Basin. Regionally, these rocks strike northeast and dip to the northwest. The sequence of rocks form a fractured-sedimentary-rock aquifer that acts as a set of confined to partially confined layers of differing permeabilities. Depth to competent bedrock typically is less than 20 ft below land surface. The aquifer layers are recharged locally by precipitation and discharge locally to streams. The general configuration of the potentiometric surface in the aquifer is similar to topography, except in areas affected by pumping. The headwaters of Wissahickon Creek are nearby, and the stream flows southwest, parallel to strike, to bisect North Penn Area 7. Groundwater is pumped in the vicinity of North Penn Area 7 for industrial use, public supply, and residential supply. Results of field investigations by USGS at the site and results from other studies support, and are consistent with, a conceptual model of a layered leaky aquifer where the dip of the beds has a strong control on hydraulic connections in the groundwater system. Connections within and (or) parallel to bedding tend to be greater than across bedding. Transmissivities of aquifer intervals isolated by packers ranged over three orders of magnitude [from about 2.8 to 2,290 square feet per day (ft 2 /d) or 0.26 to 213 square meters per day (m 2 /d)], did not appear to differ much by mapped geologic unit, but showed some relation to depth being relatively smaller in the shallowest and deepest intervals (0 to 50 ft and more than 250 ft below land surface, respectively) compared to the intermediate depth intervals (50 to 250 ft below land surface) tested. Transmissivities estimated from multiple-observation well aquifer tests ranged from about 700 to 2,300 ft 2 /d (65 to 214 m 2 /d). Results of chemical analyses of water from isolated intervals or monitoring wells open to short sections of the aquifer show vertical differences in concentrations; chloride and silica concentrations generally were greater in shallow intervals than in deeper intervals. Chloride concentrations greater than 100 milligrams per liter (mg/L), combined with distinctive chloride/bromide ratios, indicate a different source of chloride in the western part of North Penn Area 7 than elsewhere in the site. Groundwater flow at a regional scale under steady-state conditions was simulated by use of a numerical model (MODFLOW-2000) for North Penn Area 7 with different layers representing saprolite/highly weathered rock near the surface and unweathered competent bedrock. The sedimentary formations that underlie the study area were modeled using dipping model layers for intermediate and deep zones of unweathered, fractured rock. Horizontal cell model size was 100 meters (m) by 100 meters (328 ft by 328 ft), and model layer thickness ranged from 6 m (19.7 ft) representing shallow weathered rock and saprolite up to 200 m (656 ft) representing deeper dipping bedrock. The model did not include detailed structure to account for local-scale differences in hydraulic properties, with the result that local-scale groundwater flow may not be well simulated. Additional detailed multi-well aquifer tests would be needed to establish the extent of interconnection between intervals at the local scale to address remediation of contamination at each source area. This regional groundwater-flow model was calibrated against measured groundwater levels (1996, 2000, and 2005) and base flow estimated from selected streamflow measurements by use of nonlinear-regression parameter-estimation algorithms to determine hydraulic conductivity and anisotropy of hydraulic conductivity, streambed hydraulic conductivity, and recharge during calibration periods. Results of the simulation using the calibrated regional model indicate that the aquifer appears to be anisotropic where hydraulic conductivity is greatest parallel to the orientation of bedding of the formations underlying the area and least in the cross-bed direction. The maximum hydraulic conductivity is aligned with the average regional strike of the formations, which is “subhorizontal” in the model because the altitudes of the beds and model cells vary in the strike, as well as dip, direction. Estimated subhorizontal hydraulic conductivities (in strike direction parallel to dipping beds) range from 0.001 to 1.67 meters per day (0.0032 to 5.5 feet per day). The ratio of minimum (dip direction) to maximum (strike direction) subhorizontal hydraulic conductivity ranges from 1/3.1 to 1/8.6, and the ratio of vertical to horizontal hydraulic conductivity ranges from 1/1 to 1/478. However, limited available field data precluded rigorous calibration of vertical anisotropy in the model. Estimated recharge rates corresponding to calibration periods in 1996, 2000, and 2005 are 150, 109, and 124 millimeters per year (5.9, 4.3, and 4.9 inches per year), respectively. The calibrated groundwater-flow model was used to simulate groundwater flow under steady-state conditions during periods of relatively high withdrawals (pumpage) (1990) and relatively low withdrawals (2000 and 2005). Groundwater-flow paths originating from recharge areas near known areas of soil contamination (sources) were simulated. Pumped industrial and production wells captured more groundwater from several of these sources during 1990 than after 1990 when pumping declined or ceased and greater amounts of contaminated groundwater moved away from North Penn Area 7 Superfund site to surrounding areas. Uncertainty in simulated groundwater-flow paths from contaminant sources and contributing areas, resulting from uncertainty in estimated hydraulic properties of the model, was illustrated through Monte Carlo simulations. The effect of uncertainty in the vertical anisotropy was not included in the Monte Carlo simulations. Contributing areas indicating the general configuration of groundwater flow towards production well MG-202 (L-22) in the study area also were simulated for the different time periods; as simulated, the flow paths do not pass through any identified contaminant source in North Penn Area 7. However, contributing areas to wells, such as MG-202, located near many pumped wells are particularly complex and, in some cases, include areas that contribute flow to streams that subsequently recharge the aquifer through stream loss. In these cases, water-quality constituents, including contaminants that are present in surface water may be drawn into the aquifer to nearby pumped wells. Results of a simulated shutdown of well MG-202 under steady-state 2005 conditions showed that the area contributing recharge for nearby production well MG-76 (L-17), when MG-202 is not pumping, shifts downstream and is similar to the area contributing recharge for MG-202 when both wells are pumping. Concentrations of constituents in groundwater samples collected in fall 2005 or spring 2006 were compared to simulated groundwater-flow paths for the year 2005 to provide a qualitative assessment of model results. The observed spatial distribution of selected constituents, including TCE, CFC-11, and CFC-113 in groundwater in 2005 and the chloride/bromide mass ratios in 2006, generally were consistent with the model results of the simulated 2005 groundwater-flow paths at North Penn Area 7, indicating the presence of several separate sources of contaminants within North Penn Area 7.

Pennsylvania↗
USGS2016

Water-quality trends and constituent-transport analysis for selected sampling sites in the Milltown Reservoir/Clark Fork River Superfund Site in the upper Clark Fork Basin, Montana, water years 1996–2015

During the extended history of mining in the upper Clark Fork Basin in Montana, large amounts of waste materials enriched with metallic contaminants (cadmium, copper, lead, and zinc) and the metalloid trace element arsenic were generated from mining operations near Butte and milling and smelting operations near Anaconda. Extensive deposition of mining wastes in the Silver Bow Creek and Clark Fork channels and flood plains had substantial effects on water quality. Federal Superfund remediation activities in the upper Clark Fork Basin began in 1983 and have included substantial remediation near Butte and removal of the former Milltown Dam near Missoula. To aid in evaluating the effects of remediation activities on water quality, the U.S. Geological Survey began collecting streamflow and water-quality data in the upper Clark Fork Basin in the 1980s. Trend analysis was done on specific conductance, selected trace elements (arsenic, copper, and zinc), and suspended sediment for seven sampling sites in the Milltown Reservoir/Clark Fork River Superfund Site for water years 1996–2015. The most upstream site included in trend analysis is Silver Bow Creek at Warm Springs, Montana (sampling site 8), and the most downstream site is Clark Fork above Missoula, Montana (sampling site 22), which is just downstream from the former Milltown Dam. Water year is the 12-month period from October 1 through September 30 and is designated by the year in which it ends. Trend analysis was done by using a joint time-series model for concentration and streamflow. To provide temporal resolution of changes in water quality, trend analysis was conducted for four sequential 5-year periods: period 1 (water years 1996–2000), period 2 (water years 2001–5), period 3 (water years 2006–10), and period 4 (water years 2011–15). Because of the substantial effect of the intentional breach of Milltown Dam on March 28, 2008, period 3 was subdivided into period 3A (October 1, 2005–March 27, 2008) and period 3B (March 28, 2008–September 30, 2010) for the Clark Fork above Missoula (sampling site 22). Trend results were considered statistically significant when the statistical probability level was less than 0.01. In conjunction with the trend analysis, estimated normalized constituent loads (hereinafter referred to as “loads”) were calculated and presented within the framework of a constituent-transport analysis to assess the temporal trends in flow-adjusted concentrations (FACs) in the context of sources and transport. The transport analysis allows assessment of temporal changes in relative contributions from upstream source areas to loads transported past each reach outflow. Trend results indicate that FACs of unfiltered-recoverable copper decreased at the sampling sites from the start of period 1 through the end of period 4; the decreases ranged from large for one sampling site (Silver Bow Creek at Warm Springs [sampling site 8]) to moderate for two sampling sites (Clark Fork near Galen, Montana [sampling site 11] and Clark Fork above Missoula [sampling site 22]) to small for four sampling sites (Clark Fork at Deer Lodge, Montana [sampling site 14], Clark Fork at Goldcreek, Montana [sampling site 16], Clark Fork near Drummond, Montana [sampling site 18], and Clark Fork at Turah Bridge near Bonner, Montana [sampling site 20]). For period 4 (water years 2011–15), the most notable changes indicated for the Milltown Reservoir/Clark Fork River Superfund Site were statistically significant decreases in FACs and loads of unfiltered-recoverable copper for sampling sites 8 and 22. The period 4 changes in FACs of unfiltered-recoverable copper for all other sampling sites were not statistically significant. Trend results indicate that FACs of unfiltered-recoverable arsenic decreased at the sampling sites from period 1 through period 4 (water years 1996–2015); the decreases ranged from minor (sampling sites 8–20) to small (sampling site 22). For period 4 (water years 2011–15), the most notable changes indicated for the Milltown Reservoir/Clark Fork River Superfund Site were statistically significant decreases in FACs and loads of unfiltered-recoverable arsenic for sampling site 8 and near statistically significant decreases for sampling site 22. The period 4 changes in FACs of unfiltered-recoverable arsenic for all other sampling sites were not statistically significant. Trend results indicate that FACs of suspended sediment decreased at the sampling sites from period 1 through period 4 (water years 1996–2015); the decreases ranged from moderate (sampling site 8) to small (sampling sites 11–22). For period 4 (water years 2011–15), the changes in FACs of suspended sediment were not statistically significant for any sampling sites. The reach of the Clark Fork from Galen to Deer Lodge is a large source of metallic contaminants and suspended sediment, which strongly affects downstream transport of those constituents. Mobilization of copper and suspended sediment from flood-plain tailings and the streambed of the Clark Fork and its tributaries within the reach results in a contribution of those constituents that is proportionally much larger than the contribution of streamflow from within the reach. Within the reach from Galen to Deer Lodge, unfiltered-recoverable copper loads increased by a factor of about 4 and suspended-sediment loads increased by a factor of about 5, whereas streamflow increased by a factor of slightly less than 2. For period 4 (water years 2011–15), unfiltered-recoverable copper and suspended-sediment loads sourced from within the reach accounted for about 41 and 14 percent, respectively, of the loads at Clark Fork above Missoula (sampling site 22), whereas streamflow sourced from within the reach accounted for about 4 percent of the streamflow at sampling site 22. During water years 1996–2015, decreases in FACs and loads of unfiltered-recoverable copper and suspended sediment for the reach generally were proportionally smaller than for most other reaches. Unfiltered-recoverable copper loads sourced within the reaches of the Clark Fork between Deer Lodge and Turah Bridge near Bonner (just upstream from the former Milltown Dam) were proportionally smaller than contributions of streamflow sourced from within the reaches; these reaches contributed proportionally much less to copper loading in the Clark Fork than the reach between Galen and Deer Lodge. Although substantial decreases in FACs and loads of unfiltered-recoverable copper and suspended sediment were indicated for Silver Bow Creek at Warm Springs (sampling site 8), those substantial decreases were not translated to downstream reaches between Deer Lodge and Turah Bridge near Bonner. The effect of the reach of the Clark Fork from Galen to Deer Lodge as a large source of copper and suspended sediment, in combination with little temporal change in those constituents for the reach, contributes to this pattern. With the removal of the former Milltown Dam in 2008, substantial amounts of contaminated sediments that remained in the Clark Fork channel and flood plain in reach 9 (downstream from Turah Bridge near Bonner) became more available for mobilization and transport than before the dam removal. After the removal of the former Milltown Dam, the Clark Fork above Missoula (sampling site 22) had statistically significant decreases in FACs of unfiltered-recoverable copper in period 3B (March 28, 2008, through water year 2010) that continued in period 4 (water years 2011–15). Also, decreases in FACs of unfiltered-recoverable arsenic and suspended sediment were indicated for period 4 at this site. The decrease in FACs of unfiltered-recoverable copper for sampling site 22 during period 4 was proportionally much larger than the decrease for the Clark Fork at Turah Bridge near Bonner (sampling site 20). Net mobilization of unfiltered-recoverable copper and arsenic from sources within reach 9 are smaller for period 4 than for period 1 when the former Milltown Dam was in place, providing evidence that contaminant source materials have been substantially reduced in reach 9.

Montana↗
USGS2020

Assessment of water quality and fecal contamination sources at Hook Pond, East Hampton, New York

Summary The U.S. Geological Survey, in cooperation with the Village of East Hampton, New York, conducted a 1-year study from August 2017 to August 2018 to provide data necessary to improve understanding of the sources of nutrients and pathogens to Hook Pond watershed to allow for possible mitigation or reduction of loads. Chronic eutrophication and recent concern over harmful cyanobacteria in Hook Pond are the result of past and present land uses and a changing climate that have prompted the Village of East Hampton and local businesses to study and remediate factors contributing to the persistent loading of nutrients, organic contaminants, and pathogens. This assessment of Hook Pond, Hook Pond Dreen, and shallow groundwater provides the most comprehensive set of water-quality data to date. Interpretations presented in this study and the data on which they are based can be used to support management decisions, inform and contribute to modeling, and serve as a baseline for future assessments. Results from continuous monitoring of water temperature, specific conductance, and elevation at Hook Pond site 10 (Maidstone Club golf cart bridge), as well as ancillary weather and tidal data from nearby stations, were used to help explain seasonal and storm-related concentration variation of nitrogen, phosphorus, wastewater-indicator compounds, and pathogens. Data collected were also compared to existing historical data. Physicochemical constituents measured on a routine basis throughout the pond and along the tributary showed the spatial variability in water temperature, specific conductance, dissolved oxygen, pH, turbidity, and chlorophyll a and phycocyanin fluorescence. A lakebed survey was compiled based on the year-round sampling throughout the pond for future comparisons. Water-quality data from shallow groundwater at points around Hook Pond and adjacent to Hook Pond Dreen were interpreted and quantified to estimate relative contributions and species of nutrients, wastewater-indicator compounds, and microbial source tracking (MST) markers to base flow. To supplement the continuous water-surface elevation data, a single set of discharge measurements was collected under normal (nonstorm) conditions to better understand the relative contributions and dilution of surface waters by contaminated groundwater. The nutrient and physicochemical data from this study can be used in conjunction with current and future models and decision support tools to guide planned and ongoing restoration efforts, such as dredging to reduce sediment accumulation, opening a pathway to the ocean (which would change the salinity and flow dynamics of the pond and adjacent groundwater), and addressing growing concerns over cyanobacterial blooms, while serving as a baseline for measuring changes resulting from sea-level rise, climate change, and changes in nutrient loading. The microbial source tracking and indicator bacteria results can help direct efforts to reduce runoff and direct contributions of fecal contamination from dogs and waterfowl along Hook Pond Dreen. The results can also be used to assess the current state of wastewater infrastructure surrounding and contributing to Hook Pond Dreen, based on detection of human markers throughout the year and with both Bacteroides and coliphage methods.

New York↗
USGS2022

Using microbial source tracking to identify fecal contamination sources in Patchogue and Bellport Bays on Long Island, New York

The U.S. Geological Survey worked in cooperation with the New York State Department of Environmental Conservation to assess the potential sources of fecal contamination entering Patchogue and Bellport Bays, two embayments on the south shore of Suffolk County, Long Island, New York. Water samples are routinely collected by the New York State Department of Environmental Conservation in the bays and analyzed for fecal coliform bacteria, an indicator of fecal contamination, to determine the need for closure of shellfish beds for harvest and consumption. Fecal coliform and other bacteria are an indicator of the potential presence of pathogenic (disease-causing) bacteria. However, indicator bacteria alone cannot determine the biological or geographical sources of contamination; therefore, microbial source tracking was implemented to determine various biological sources of contamination. In addition, information such as the location, weather and season, and surrounding land use where a sample was collected help determine the geographical source and conveyance of land-based water to the embayment. Analysis revealed that the most substantial source of fecal contamination to Patchogue and Bellport Bays was discharge from sites draining ponds and wetlands into the rivers and tributaries sampled, particularly during the summer months. Fecal coliform bacteria at sites where ponds and wetlands drain are increased by stormwater runoff, which is another substantial source of fecal contamination. Overall, canine- and waterfowl-associated bacterial contributions were prevalent in source samples in both bays. Human-associated markers were present in surface-water source samples and completely absent in receptor samples in Patchogue Bay. The Fireplace Neck receptor site in Bellport Bay had a human-associated marker present in the summer wet sample only. Human markers were detected at the sample site downstream from the Patchogue wastewater treatment plant but were associated with low fecal coliform concentrations, indicating that the wastewater treatment plant is not a likely source of fecal contamination to Patchogue Bay. The lack of human-associated marker detections within Patchogue and Bellport Bays in summer source samples coupled with low to no detections of fecal coliform, especially where small marinas are present in creeks and tributaries, suggest that boats do not substantially contribute fecal coliform bacteria to the bays. There was little evidence of groundwater-contributing fecal bacteria by direct discharge from the subsurface. Further, the sandy sediment alongside Patchogue and Bellport Bays is unlikely to contribute fecal coliform bacteria from the test host organisms when resuspended in the water column. A classification scheme was developed to convey the degree of fecal contamination to stakeholders and resource managers. Based on this classification scheme, the Corey Creek Near Middle Road, Patchogue River Near Division Street, and Swan River Mouth sampling sites were identified as locations that contribute substantial fecal contamination to Patchogue Bay. In Bellport Bay, the Culvert at Beaverdam Creek site was identified as the location contributing the most substantial fecal contamination.

New York↗
USGS2023

PCB source assessment in the lower Clinton River, Clinton River Area of Concern, Mount Clemens, Michigan

Polychlorinated biphenyls (PCBs), some of the earliest “forever chemicals,” were used for decades in the United States before 1979 when PCB manufacturing was banned. High PCB concentrations were found recently in the lower Clinton River in the Great Lakes drainage. To determine the possible existence, location, and significance of a current source of PCBs, the U.S. Geological Survey (USGS) deployed passive water samplers (SPMDs, semipermeable membrane devices) in the river at 15 sites for 1 month in 2019 near outfalls of interest and other locations. USGS also deployed passive stream sediment samplers at a subset of four sites during the same period and collected bank sediment samples at a subset of four sites. Sediment from nearby catch basins was also collected. Samples were assayed for 209 individual PCB congeners, and patterns in total and individual congeners were evaluated; ancillary sediment data included grain size, total organic carbon, and moisture. U.S. Army Corps of Engineers (USACE) data for total PCBs and 209 PCB congeners in surficial sediment samples collected in 2019 were also evaluated. In general, total PCBs were highest in streambed sediment, followed by catch basin sediment, bank sediment, and then water as estimated from SPMDs. Total PCBs in sediment were low in all catch basins but one (sample CB19–02) that drains from an historical landfill area to one of two adjacent outfalls of interest: the outfall for a nearby wastewater treatment plant and adjacent outfall MTC–R–060, where the highest total PCBs in USGS stream sediment samples were found (site 14, sample 14STRM; 1,260,000 picograms per gram). Also, the SPMD at site 14 was the only water sample with more “light” (three or fewer chlorine atoms) than “heavy” (four or more chlorine atoms) PCB congeners, and the passive sediment sample had the highest proportion of light PCBs in USGS sediment samples. Light PCB congeners degrade more quickly than heavy PCB congeners and results may indicate that one or more current sources of PCBs are contributing to total PCBs in sediment at four river sites. Of 209 possible PCB congeners assayed, 117 congeners were detected in water samples; 155 and 154 congeners were detected in USGS and USACE sediment samples, respectively. PCBs 28, 73, 31, and 18 (highest to lowest) contributed most toward total PCBs in water samples overall; PCBs 20/28, 31, 52, and 44/47/65 contributed most toward total PCBs for sediment in USGS stream samples overall and USACE samples overall; these rankings were also true for catch basins overall except for PCB–31. After omitting coeluting congeners to allow further comparison, 5 key PCB congeners are in the top 20 congeners across all assay groups: 17, 31, 52, 95, and 118. The importance of these congeners in multiple assays aligns with their importance as components of certain Aroclors. Sediment from the high PCB catch basin (sample CB19–02) had a different pattern of top congeners than the other catch basins, and multivariate analyses indicated a high degree of similarity in its overall congener pattern with that of the highest PCB sediment sample (sample 14STRM) collected by the outfalls for the catch basin and the wastewater treatment plant. Similarities in overall congener patterns across sample media as determined by multivariate analyses confirmed some site linkages and the possibility of more than one source of PCBs to the reach. Furthermore, equilibrium partitioning calculations indicated that water concentrations as estimated by SPMDs were high enough to result in the PCB concentrations measured in USGS passive sediment samples but not USACE surficial sediment samples when normalized by organic carbon. However, the SPMDs and passive sediment samples reflect only one month of contribution to the river and higher concentrations would be expected to result with years of PCB accumulation. PCBs contributed to the river water by outfalls could eventually partition to sediment in the reach. Thus, the river could have a current source or sources of PCBs, perhaps one or more outfalls near four sites. Additional investigation is needed to better define the relative significance of each outfall and areas in nearby drainage systems that may be contributing PCBs to outfalls and the river.

Michigan↗
USGS2000

Simulation of ground-water flow in an unconfined sand and gravel aquifer at Marathon, Cortland County, New York

The Village of Marathon, in Cortland County, N.Y., has three municipal wells that tap a relatively thin (25 to 40 feet thick) and narrow (less than 0.25 mile wide) unconfined sand and gravel aquifer in the Tioughnioga River valley. Only one of the wells is in use because water from one well has been contaminated by petroleum chemicals from a leaking storage tank, and water from the other well contains high concentrations of manganese. The operating well pumps about 0.1 million gallons per day and supplies about 1,000 people. A three-dimensional, finite-difference ground-water-flow model was used to (1) compute hydraulic heads in the aquifer under steady-state conditions, (2) develop a water budget, and (3) delineate the areas contributing recharge to two simulated wells that represent two of the municipal wells: one 57 feet east of the Tioughnioga River, the other 4,000 feet to the south and 75 feet from a man-made pond. The water budget for simulated long-term average, steady-state conditions with two simulated pumping wells indicates that the principal sources of recharge to the unconfined aquifer are unchanneled runoff and ground-water inflow from the uplands (41 percent of total recharge), precipitation that falls directly on the aquifer (34 percent), and stream leakage (23 percent). Only 2 percent of the recharge to the aquifer is from ground-water underflow into the northern end of the modeled area. Most of the simulated groundwater discharge from the modeled area (78 percent of total discharge) is to the Tioughnioga River; the rest discharges to the two simulated wells (19 percent) and as underflow at the southern end of the modeled area (3 percent). Results of a particle-tracking analysis indicate that the aquifer contributing area of the northern (simulated) well is 0.10 mile wide and 0.15 mile long and encompasses 0.015 square miles; the contributing area of the southern (simulated) well is 0.20 mile wide and 0.11 mile long and encompasses 0.022 square miles. The average traveltime of ground water from the valley wall to either simulated well is about 1.5 years, calculated on the basis of an assumed aquifer porosity of 0.3. The flowpath analysis indicates that both contributing areas contain surface-water sources of recharge; the Tioughnioga River and Hunts Creek contribute water to the northern well, and a pond and a small tributary contribute water to the southern well. Ground-water temperature in an observation well between the Tioughnioga River and the municipal well fluctuated several degrees Fahrenheit in response to pumping of the municipal well. This temperature fluctuation, in conjunction with the pumping well causing a ground-water gradient from the Tioughnioga River to the pumping well (ground-water levels in the pumping well were generally greater than 3 ft lower than that of the Tioughnioga River), indicate that there is a hydraulic connection between the river and aquifer at this site.

Water-Resources Investigations Report↗
USGS2001

Mountain Island Lake, North Carolina: Analysis of ambient conditions and simulation of hydrodynamics, constituent transport, and water-quality characteristics, 1996–97

Mountain Island Lake is an impoundment of the Catawba River in North Carolina and supplies drinking water to more than 600,000 people in Charlotte, Gastonia, Mount Holly, and several other communities. The U.S. Geological Survey, in cooperation with the Charlotte-Mecklenburg Utilities, conducted an investigation of the reservoir to characterize hydrologic and water-quality conditions and to develop and apply a simulation model to predict the response of the reservoir to changes in constituent loadings or the flow regime. During 1996–97, flows into Mountain Island Lake were dominated by releases from Cowans Ford Dam on Lake Norman, with more than 85 percent of the total inflow to the reservoir coming from Lake Norman. Riverbend Steam Station discharges accounted for about 12 percent of the inflows to the reservoir, and inflows from tributary streams contributed less than 1.5 percent of the total inflows. Releases through Mountain Island Dam accounted for about 81 percent of outflows from the reservoir, while Riverbend Steam Station withdrawals, which were equal to discharge from the facility, constituted about 13 percent of the reservoir withdrawals. About 5.5 percent of the withdrawals from the reservoir were for water supply. Strong thermal stratification was seldom observed in Mountain Island Lake during April 1996-September 1997. As a result, dissolved-oxygen concentrations were only infrequently less than 4 milligrams per liter, and seldom less than 5 milligrams per liter throughout the entire reservoir, including the coves. The Riverbend Steam Station thermal discharge had a pronounced effect on surface-water temperatures near the outfall. McDowell Creek, which drains to McDowell Creek cove, receives treated wastewater from a large municipal facility and has exhibited signs of poor water-quality conditions in the past. During April 1996-September 1997, concentrations of nitrate, ammonia, total phosphorus, and chlorophyll a were higher in McDowell Creek cove than elsewhere throughout the reservoir. Nevertheless, the highest chlorophyll a concentration measured during the study was 13 micrograms per liter—well below the North Carolina ambient water-quality standard of 40 micrograms per liter. In the mainstem of the reservoir, near-bottom ammonia concentrations occasionally were greater than near-surface concentrations. However, the relatively large top-to-bottom differences in ammonia and phosphorus that have been observed in other Catawba River reservoirs were not present in Mountain Island Lake. External loadings of suspended solids, nitrogen, phosphorus, and biochemical oxygen demand were determined for May 1996-April 1997. Flows through Cowans Ford Dam contributed more than 80 percent of the biochemical oxygen demand and nitrogen load to the reservoir, with McDowell Creek contributing about 15 percent of the biochemical oxygen demand load. In contrast, McDowell Creek contributed about half of the phosphorus load to the reservoir, while inflows through Cowans Ford Dam contributed about one-fourth of the phosphorus load, and the McDowell Creek wastewater-treatment plant contributed about 15 percent of the total phosphorus load. The remainder of the phosphorus loadings came from Gar Creek and the discharge from the Riverbend ash settling pond. Mountain Island Lake is a relatively small (11.3-square-kilometer surface area) impoundment. An area of 181 square kilometers drains directly to the reservoir, but much of this area is undergoing development. In addition, the reservoir receives treated effluent from a municipal wastewater-treatment facility. The two-dimensional, laterally averaged model CE-QUAL-W2 was applied to Mountain Island Lake. The model was configured to simulate water level, water temperature, and 12 water-quality constituents. The model included the mainstem, four coves, three point-source discharges, and three withdrawals. Simulated water levels generally were within 10 centimeters of measured values, indicating a good calibration of the water balance for the reservoir. The root-mean-square difference between measured and simulated water temperatures was about 1 to 1.5 degrees Celsius, and vertical distributions of water temperature were accurately simulated in both the mainstem and coves. Seasonal and spatial patterns of nitrate, ammonia, orthophosphorus, and chlorophyll a were reasonably reproduced by the water-quality model. Because of the absence of the denitrification process in the model formulation, nitrate concentrations typically were overpredicted. Simulated and measured ammonia concentrations seldom differed by more than 0.01 milligram per liter, and simulations of seasonal fluctuations in chlorophyll a were representative of measured conditions. The root mean square of the difference between measured and simulated dissolved-oxygen concentrations was about 1 milligram per liter. The calibrated water-quality model was applied to evaluate (1) the movement of a conservative, neutrally buoyant material, or tracer, through the reservoir for several sets of conditions; (2) the effects of the Riverbend thermal discharge on water temperature in the reservoir; (3) the effects of changes in water-supply withdrawal rates on water-quality conditions; and (4) changes in reservoir water quality in response to changes in point- and nonpoint-source loadings. In general, dissolved material entering Mountain Island Lake from both Cowans Ford Dam and McDowell Creek during the summer moves along the bottom of the lake toward Mountain Island Dam, with little mixing of dissolved material into the surface layers. Simulations suggest that dissolved material can move upstream in the reservoir when flows from Cowans Ford Dam are near zero. Dissolved material can remain in Mountain Island Lake for a period far in excess of the theoretical retention time of 12 days. Simulations indicated that the Riverbend thermal discharge increases water temperature in the surface layers of the downstream part of the reservoir by as much as 5 degrees Celsius. However, the discharge has little effect on near-bottom water temperature. Based on model simulations, a proposed doubling of the water-supply withdrawals from Mountain Island Lake has no readily apparent effect on water quality in the reservoir. The increased withdrawal rate may have some localized effects on circulation in the reservoir, but a more detailed model of the intake zone would be required to identify those effects. The effects of a 20-percent increase in water-chemistry loadings through Cowans Ford Dam and from McDowell Creek were simulated separately. Increased loadings from Cowans Ford Dam had about the same effect on water-quality conditions near Mountain Island Dam as did increased loadings from McDowell Creek. Maintaining good water quality in Mountain Island Lake depends on maintaining good water quality in Lake Norman as well as in the inflows from the McDowell Creek watershed.

North Carolina↗
USGS2001

Assessment of water-quality conditions in the J.B. Converse Lake watershed, Mobile County, Alabama, 1990-98

J.B. Converse (Converse) Lake is a 3,600-acre, tributary-storage reservoir in Mobile County, southwestern Alabama. The lake serves as the primary drinking-water supply for the city of Mobile. The Converse Lake watershed lies within the Coastal Plain Physiographic Province. Semiconsolidated to unconsolidated sediments of sand, silt, gravel, and clay underlie the watershed, and are covered by acidic soils. Land use in the watershed is mainly forest (64 percent) and agriculture (31 percent). Residential and commercial development account for only 1 percent of the total land use in the watershed. Converse Lake receives inflow from seven major tributaries. The greatest inflows are from Big Creek, Crooked Creek, and Hamilton Creek that had mean annual streamflows of 72.2, 19.4, and 25.0 cubic feet per second, respectively, for the period 1990 to 1998, which represents about 72 percent of the total annual streamflow to the lake. The total mean annual inflow to the lake is estimated to be about 163 cubic feet per second. In general, water quality in Converse Lake and its tributaries meets the criteria established by the Alabama Department of Environmental Management (ADEM) for drinking-water supplies, whole-body contact, and aquatic life. The exceptions include acidic pH levels, iron and manganese levels above secondary or aesthetic criteria, and fecal bacterial levels in some tributaries above whole-body contact (swimmable) criteria. The pH levels throughout the watershed were commonly below the criteria level of 6.0, but this appears to have been a naturally occurring phenomenon caused by poorly buffered soil types, resistant sediments, and forested land use. Median iron and manganese levels were above aesthetic criteria levels of 300 and 50 micrograms per liter, respectively, in some tributaries. All tributary sites in the Converse Lake watershed had median and minimum dissolved-oxygen concentrations above the ADEM criteria level of 5 milligrams per liter except for Boggy Branch, which had a minimum dissolved-oxygen concentration of 3.7 milligrams per liter. The degree to which nutrient contributions from tributaries were causing nutrient enrichment and eutrophication in Converse Lake was assessed. Trend analysis detected little or no change in nutrient concentrations at the tributary and lake sites in the Converse Lake watershed from the 1991 to 1998 water years. Nutrient concentrations at most tributary sites exhibited a significant, positive relation with streamflow that indicated the dominant source of nutrient input to the watershed is from nonpoint contributions. From 1990 to 1998, computed mean annual loads of 75,400 kilograms of total nitrogen, 36,950 kilograms of total Kjeldahl nitrogen, 28,870 kilograms of total inorganic nitrogen, and 3,480 kilograms of total phosphorus were contributed to the lake by Big Creek, Hamilton Creek, and Crooked Creek combined. These mean annual loads of nutrients corresponded to borderline eutrophic/mesotrophic conditions in the lake. Of the combined loads, 62 percent of the total nitrogen, 70 percent of the total Kjeldahl nitrogen, 54 percent of the total inorganic nitrogen, and 47 percent of the total phosphorus originated from the forested subbasin of Big Creek. The more residential and agricultural subbasins of Crooked Creek and Hamilton Creek, however, yielded over twice the total phosphorus load per hectare of land use. Crooked and Hamilton Creek subbasins also had higher yields of the more bioavailable total inorganic nitrogen. A simplistic empirical model could not explain the relation between year-to-year nutrient contributions to Converse Lake from the tributaries and the lake's ability to assimilate those contributions. The potential presence of pathogens in the lake and its tributaries was assessed based on fecal bacterial concentrations. Fecal bacterial concentrations at some tributary sites were above existing criteria for swimmable uses. Contributions of fecal bacte

Water-Resources Investigations Report↗
USGS2004

Quantification of metal loading to Silver Creek through the Silver Maple Claims area, Park City, Utah, May 2002

The Silver Maple Claims area along Silver Creek, near Park City, Utah, is administered by the Bureau of Land Management. To quantify possible sources of elevated zinc concentrations in Silver Creek that exceed water-quality standards, the U.S. Geological Survey conducted a mass-loading study in May 2002 along a 1,400-meter reach of Silver Creek that included the Silver Maple Claims area. Additional samples were collected upstream and downstream from the injection reach to investigate other possible sources of zinc and other metals to the stream. Many metals were investigated in the study, but zinc is of particular concern for water-quality standards. The total loading of zinc along the study reach from Park City to Wanship, Utah, was about 49 kilograms per day. The Silver Maple Claims area contributed about 38 percent of this load. The Silver Creek tailings discharge pipe, which empties just inside the Silver Maple Claims area, contributed more than half the load of the Silver Maple Claims area. Substantial zinc loads also were added to Silver Creek downstream from the Silver Maple Claims area. Ground-water discharge upstream from the waste-water treatment plant contributed 20 percent of the total zinc load, and another 17 percent was contributed near the waste-water treatment plant. By identifying the specific areas where zinc and other metal loads are contributed to Silver Creek, it is possible to assess the needs of a remediation plan. For example, removing the tailings from the Silver Maple Claims area could contribute to lowering the zinc concentration in Silver Creek, but without also addressing the loading from the Silver Creek tailings discharge pipe and the ground-water discharge farther downstream, the zinc concentration could not be lowered enough to meet water-quality standards. Additional existing sources of zinc loading downstream from the Silver Maple Claims area could complicate the process of lowering zinc concentration to meet water-quality standards.

Utah↗
USGS1998

Water-quality conditions of the lower Boise River, Ada and Canyon Counties, Idaho, May 1994 through February 1997

Agricultural land and water use, wastewater treatment facility discharges, land development, road construction, urban runoff, confined-animal feeding operations, reservoir operations, and river channelization affect the water quality and biotic integrity of the lower Boise River between Lucky Peak Dam and the river's mouth at Parma, Idaho. During May 1994 through February 1997, 4 sites on the Boise River, 12 tributary/drain sites, and 3 wastewater treatment facilities were sampled at various intervals during the irrigation (high-flow) and post-irrigation (low-flow) seasons to determine sources, concentrations, and relative loads of nutrients and suspended sediment. Discharge entering the Boise River from the 12 tributary/drain sites and 3 wastewater treatment facilities was measured to determine the nutrient loads being contributed from each source. Total nitrogen, total phosphorus, and suspended sediment concentrations and loads tended to increase in a downstream direction along the Boise River. Among the 15 sources of discharge to the Boise River, 3 southside tributary/drains and the West Boise wastewater treatment facility contributed the largest loads of total nitrogen; the median daily load was more than 2,000 pounds per day. The West Boise wastewater treatment facility contributed the largest median daily load of total phosphorus (810 pounds per day); Dixie Drain contributed the largest median daily load of suspended sediment (26.4 tons per day). Nitrogen-to-phosphorus ratios at the four Boise River sites indicated that phosphorus could be limiting algal growth at the Diversion Dam site, whereas nitrogen could be limiting algal growth at the Glenwood and Middleton sites during some parts of the year. Algal growth in the Boise River near Parma did not appear to be nutrient limited. Because of the complexity of the plumbing system in the lower Boise River (numerous diversions and inflow points), accurate comparisons between discharge and nutrient loads entering the river at measured sites during high-flow sampling periods were difficult. During low-flow sampling periods, southside tributary/drains contributed most of the discharge and total nitrogen load, and wastewater treatment facilities contributed most of the total phosphorus load to the Boise River. During the 50-day period July 18 through September 5, 1996, the Idaho State standard for maximum daily average temperature for coldwater biota was exceeded by 34 percent at Middleton, 48 percent at Caldwell, and 80 percent near Parma. Violations of State standards for primary and secondary contact recreation were observed at all tributary/ drains and in the Boise River near Parma. Median instantaneous concentrations of fecal coliform bacteria exceeded State standards for primary contact recreation at five tributary/drains and exceeded standards for secondary contact recreation at one tributary/drain (Dixie Drain).

Idaho↗
USGS1999

Sources and chronology of nitrate contamination in spring waters, Suwannee River basin, Florida

A multi-tracer approach, which consisted of analyzing water samples for n aturally occurring chemical and isotopic indicators, was used to better understand sources and chronology of nitrate contamination in spring wate rs discharging to the Suwannee and Santa Fe Rivers in northern Florida. Dur ing 1997 and 1998, as part of a cooperative study between the Suwannee River Water Management District and the U.S. Geological Survey, water samples were collected and analyzed from 24 springs and two wells for major ions, nutrients, dissolved organic carbon, and selected environmental isotopes [18O/16O, D/H, 13C/12C, 15N/14N]. To better understand when nitrate entered the ground-water system, water samples were analyzed for chlorofluorocarbons (CFCs; CCl3F, CCl2F2, and C2Cl3F3) and tritium (3H); in this way, the apparent ages and residence times of spring waters and water from shallow zones in the Upper Floridan aquifer were determined. In addition to information obtained from the use of isotopic and other chemical tracers, information on changes in land-use activities in the basin during 1954-97 were used to estimate nitrogen inputs from nonpoint sources for five counties in the basin. Changes in nitrate concentrations in spring waters with time were compared with estimated nitrogen inputs for Lafayette and Suwannee Counties. Agricultural activities [cropland farming, animal farming operations (beef and dairy cows, poultry, and swine)] along with atmospheric deposition have contributed large quantities of nitrogen to ground water in the Suwannee River Basin in northern Florida. Changes in agricultural land use during the past 40 years in Alachua, Columbia, Gilchrist, Lafayette, and Suwannee Counties have contributed variable amounts of nitrogen to the ground-water system. During 1955-97, total estimated nitrogen from all nonpoint sources (fertilizers, animal wastes, atmospheric deposition, and septic tanks) increased continuously in Gilchrist and Lafayette Counties. In Suwannee, Alachua, and Columbia Counties, estimated nitrogen inputs from all nonpoint sources peaked in the late 1970's corresponding to the peak use in fertilizer during this time. Fertilizer use in Columbia, Gilchrist, Lafayette, and Suwannee Counties increased substantially during 1993-97. The heavy use of fertilizers in the basin is corroborated by nitrogen isotope data. Values of d15N of nitrate (d15N-NO3) in spring waters range from 2.7 per mil (SUW718971) to 10.6 per mil (Poe Spring) with a median of 5.4 per mil. The range of values indicates that nitrate in the sampled spring waters most likely originates from a mixture of inorganic (fertilizers) and organic (animal wastes) sources; however, higher d15N values for Poe and Lafayette Blue Springs indicate that an organic source of nitrogen probably is contributing nitrate to these spring waters. Water samples from two wells sampled in Lafayette County have high d15N-NO3 values of 11.0 and 12.1 per mil, indicating the predominance of an organic source of nitrate. These two wells are located near dairy and poultry farms, where leachate from animal wastes may contribute nitrate to ground water. Dissolved-gas data (nitrogen, argon, and oxygen) indicate that denitrification has not removed large amounts of nitrate from the ground-water system. Thus, variations in d15N-NO3 values of spring waters can be attributed to variations in d15N-NO3 values of ground-water recharge, and can be used to obtain information about source(s) of nitrate. Extending the use of age-dating techniques (CFCs and 3H) to spring waters in complex karst systems required the use of several different approaches for estimating age and residence time of ground water discharging to springs. These approaches included the use of a simple reservoir model, a piston-flow model, an exponential model, and a binary-mixing model. When age data (CFC-11, CFC-113, and 3H) are combined for all springs, models that incorporate exponential mixtures seem to provide reliable estimates of average residence times of ground water discharging to springs. Whereas, data for some individual springs fit a binary-mixing model with more than 50 percent young water (recharged within the past 5 years), data from other individual springs fit a piston-flow model with a water age of about 25 years. The young ages of several spring waters (such as SUW718971, SUW725971, and Ginnie Spring) indicate the high vulnerability of the springs to contamination. For most springs, CFCs suggest that a large fraction of the water is more than 20 years old. Springs with lower flows tend to have young ages (shallow ground-water flow systems), whereas springs with higher flows tend to have older ages (deep ground-water flow systems). The chemical composition of spring waters can be used as a qualitative indicator of age and ground-water residence time. Nitrate-nitrogen concentrations and dissolved oxygen in spring waters are inversely related to the apparent ages of spring waters and ground-water residence time in the basin. Silica concentrations increase as the age of spring waters increase. Long-term trends in nitrate concentrations in selected spring waters were compared with estimated inputs of nitrogen from various sources in Suwannee and Lafayette Counties. In both counties, trends in nitrate concentrations in spring waters closely followed the estimated contribution of nitrogen from fertilizers. Decreasing nitrate concentrations in spring waters from Suwannee County followed the decrease in estimated fertilizer use from the mid-1970's to the early 1990's. Increasing nitrate concentrations in sprin g waters from Lafayette County followed the steady increase in fertilizer use from the early 1960's to the mid-1990's The relation between the concentration of nitrate in ground water and the amount of nitrogen that is added to a ground-water contributing area for a spring is controlled by complex interactions among hydrogeologic, land-use, and climatic factors, as well as several other land-management factors. Spring waters represent mixtures of converging flow paths that contain ground water with a range of ages. Even if nitrogen inputs were reduced substantially, it may take decades for nitrate concentrations in the ground-water system to return to near background levels.

Florida↗
USGS1985

Chemical and physical characteristics of water and sediment in Scofield Reservoir, Carbon County, Utah

Evaluations based on the nutrient content of the inflow, outflow, water in storage, and the dissolved-oxygen depletion during the summer indicate that the trophic state of Scofield Reservoir is borderline between mesotrophic and eutrophic and may become highly eutrophic unless corrective measures are taken to limit nutrient inflow. Sediment deposition in Scofield Reservoir during 1943-79 is estimated to be 3,000 acre-feet, and has decreased the original storage capacity of the reservoir by 4 percent. The sediment contains some coal, and age dating of those sediments (based on the radioisotope lead-210) indicates that most of the coal was deposited prior to about 1950. Scofield Reservoir is dimictic, with turnovers occurring in the spring and autumn. Water in the reservoir circulates completely to the bottom during turnovers. The concentration of dissolved oxygen decreases with depth except during parts of the turnover periods. Below an altitude of about 7,590 feet, where 20 percent of the water is stored, the concentration of dissolved oxygen was less than 2 milligrams per liter during most of the year. During the summer stratification period, the depletion of dissolved oxygen in the deeper layers is coincident with supersaturated conditions in the shallow layers; this is attributed to plant photosynthesis and bacterial respiration in the reservoir. During October 1,1979-August 31,1980, thedischargeweighted average concentrations of dissolved solids was 195 milligrams per liter in the combined inflow from Fish, Pondtown, and Mud Creeks, and was 175 milligrams per liter in the outflow (and to the Price River). The smaller concentration in the outflow was due primarily to precipitation of calcium carbonate in the reservoir about 80 percent of the decrease can be accounted for through loss as calcium carbonate. The estimated discharge-weighted average concentration of total nitrogen (dissolved plus suspended) in the combined inflow of Fish, Pondtown, and Mud Creeks was 1.1 milligrams per liter as nitrogen. The load of total nitrogen contributed by each stream was about proportional to the quantity of water contributed by the respective stream. For the combined inflow of Fish, Pondtown, and Mud Creeks, the discharge-weighted average concentration of total phosphorus was 0.06 milligram per liter as phosphorus. Percentages of the total phosphorus load contributed by Mud and Pondtown Creeks were significantly larger than their percentages of the total inflow. During October 1, 1979-August 31, 1980, Fish Creek contributed 72 percent of the inflowing water but only 60 percent of the total phosphorus load, Mud Creek contributed 16 percent of the total inflow but 24 percent of the total phosphorus load, and Pondtown Creek contributed 6 percent of the total inflow and 16 percent of the load of total phosphorus. Eccles Canyon is a major contributor of nutrients to Mud Creek, and most of the nutrient load occurs in the form of suspended organic material. During the snowmelt period, concentrations of total nitrogen and phosphorus were as much as 21 and 4.3 milligrams per liter at the gaging station in Eccles Canyon. The unusually large concentrations of nitrogen and phosphorus probably have resulted from flushing of residual debris from the canyon about 27.3 acres of forested land were cleared during 1979 for fire protection around new mine portals and for road rights-of-way. The concentrations of trace metals in the sediments near the inflow of Mud Creek are not greatly different from those in the middle of the reservoir, which suggests that sediments related to coal mining either have not affected the trace-metal concentrations in the sediments or, particularly for the fine-grained sediments, have been uniformly distributed over the reservoir bottom. The concentration of total extractable mercury in the sediments ranged from 0.08 to 0.20 part per million near the inflow of Mud Creek and from 0.08 to 0.46 part per million at a site near the middle of the reservoir. Virtually all the mercury is silica bound, which is the least soluble fraction. The maximum concentration of mercury in the nondetrital and easily soluble fraction was 0.02 part per million at both sites.

Utah↗
USGS1995

Effect of seasonal and long-term changes in stress on sources of water to wells

The source of water to wells is ultimately the location where the water flowing to a well enters the boundary surface of the ground-water system . In ground-water systems that receive most of their water from areal recharge, the location of the water entering the system is at the water table . The area contributing recharge to a discharging well is the surface area that defines the location of the water entering the groundwater system. Water entering the system at the water table flows to the well and is eventually discharged from the well. Many State agencies are currently (1994) developing wellhead-protection programs. The thrust of some of these programs is to protect water supplies by determining the areas contributing recharge to water-supply wells and by specifying regulations to minimize the opportunity for contamination of the recharge water by activities at the land surface. In the analyses of ground-water flow systems, steady-state average conditions are frequently used to simplify the problem and make a solution tractable. Recharge is usually cyclic in nature, however, having seasonal cycles and longer term climatic cycles. A hypothetical system is quantitatively analyzed to show that, in many cases, these cyclic changes in the recharge rates apparently do not significantly affect the location and size of the areas contributing recharge to wells. The ratio of the mean travel time to the length of the cyclic stress period appears to indicate whether the transient effects of the cyclic stress must be explicitly represented in the analysis of contributing areas to wells. For the cases examined, if the ratio of the mean travel time to the period of the cyclic stress was much greater than one, then the transient area contributing recharge to wells was similar to the area calculated using an average steady-state condition. Noncyclic long-term transient changes in water use, however, and cyclic stresses on systems with ratios less than 1 can and do affect the location and size of the areas contributing recharge to wells.

Water Supply Paper↗
USGS2019

Estimation of base flow by optimal hydrograph separation for the conterminous United States and implications for national-extent hydrologic models

Optimal hydrograph separation (OHS) uses a two-parameter recursive digital filter that applies specific conductance mass-balance constraints to estimate the base flow contribution to total streamflow at stream gages where discharge and specific conductance are measured. OHS was applied to U.S. Geological Survey (USGS) stream gages across the conterminous United States to examine the range/distribution of base flow inputs and the utility of this method to build a hydrologic model calibration dataset. OHS models with acceptable goodness-of-fit criteria were insensitive to drainage area, stream density, watershed slope, elevation, agricultural or perennial snow/ice land cover, average annual precipitation, runoff, or evapotranspiration, implying that OHS results are a viable calibration dataset applicable in diverse watersheds. OHS-estimated base flow contribution was compared to base flow-like model components from the USGS National Hydrologic Model Infrastructure run with the Precipitation-Runoff Modeling System (NHM-PRMS). The NHM-PRMS variable gwres_flow is most conceptually like a base flow component of streamflow but the gwres_flow contribution to total streamflow is generally smaller than the OHS-estimated base flow contribution. The NHM-PRMS variable slow_flow , added to gwres_flow , produced similar or greater estimates of base flow contributions to total streamflow than the OHS-estimated base flow contribution but was dependent on the total flow magnitude.

conterminous United States↗
USGS1997

Tracing hydrologic pathways at the Panola Mountain research watershed, Georgia, USA

An analysis of Cl- concentrations and fluxes at the Panola Mountain Research Watershed indicates that Cl- may be effectively used to differentiate 'new' and 'old' water flow through the hillslope and their respective contributions to streamwater. Rainfall and throughfall, the 'new' water inputs, are marked by low Cl- concentrations (15 ??eq 1-1). Stormwater moves rapidly to depth along preferred pathways in a deciduous forest hillslope, as evidenced by low concentrations (20 ??eq 1-1) in mobile soil water from zero-tension stainless-steel pan lysimeters. 'Old' waters, matrix soil waters and groundwater, typically have high concentrations (20 ??eq 1-1). Timing of soil water transport is not sufficiently rapid to suggest that soil water from the hillslope contributes to streamwater for an individual rainstorm. The source of streamflow, therefore, must be a combination of channel interception, runoff from near-channel areas, and runoff from a 3-ha bedrock outcrop in the headwaters. Groundwater contribution to streamflow was estimated using Cl- concentrations of throughfall and groundwater as the two end members for a two-component hydrograph separation. For the study period, groundwater contributed 79% of the runoff and from 1985 to 1995, contributed 75% of the runoff. Rainfall was the source of 45% of the Cl- flux from the watershed in the long term; the remaining Cl- is hypothesized to be derived from dry deposition, consistent with the enrichment noted for throughfall. At peak flow during individual rainstorms, 'new' water can contribute 95% of the runoff.

Hydrochemistry. Proc. international symposium, Rab↗
USGS1967

Field Methods for the Study of Slope and Fluvial Processes

In Belgium during the summer of 1966 the Commission on Slopes and the Commission on Applied Geomorphology of the International Geographical Union sponsored a joint symposium, with field excursions, and meetings of the two commissions. As a result of the conference and associated discussions, the participants expressed the view that it would be a contribution to scientific work relating to the subject area if the Commission on Applied Geomorphology could prepare a small manual describling the methods of field investigation being used by research scientists throughout the world in the study of various aspects of &lope development and fluvial processes. The Commission then assumed this responsibility and asked as many persons as were known to be. working on this subject to contribute whatever they wished in the way of descriptions of methods being employed. The purpose of the present manual is to show the variety of study methods now in use, to describe from the experience gained the limitations and advantages of different techniques, and to give pertinent detail which might be useful to other investigators. Some details that would be useful to know are not included in scientific publications, but in a manual on methods the details of how best t6 use a method has a place. Various persons have learned certain things which cannot be done, as well as some methods that are successful. It is our hope that comparison of methods tried will give the reader suggestions as to how a particular method might best be applied to his own circumstance. The manual does not purport to include methods used by all workers. In particular, it does not interfere with a more systematic treatment of the subject (1) or with various papers already published in the present journal. In fact we are sure that there are pertinent research methods that we do not know of and the Commission would be glad to receive additions and other ideas from those who find they have something to contribute. Also, the manual describes the methods in brief form. If further details are desired we urge that individual scientists correspond with their colleagues whose contributions are included in this little volume. The Commission thanks all contributors to this manual and hopes that their contributions have been included in a satisfactory way. The Commission also thanks Dr. Luna B. Leopold of the United States Geological Survey, who at our request assumed the task of collecting the contributions, editing them and compiling the present work.

Revue de Géomorphologie Dynamique↗