Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS2013

Velocity Mapping Toolbox (VMT): a processing and visualization suite for moving-vessel ADCP measurements

The use of acoustic Doppler current profilers (ADCP) for discharge measurements and three-dimensional flow mapping has increased rapidly in recent years and has been primarily driven by advances in acoustic technology and signal processing. Recent research has developed a variety of methods for processing data obtained from a range of ADCP deployments and this paper builds on this progress by describing new software for processing and visualizing ADCP data collected along transects in rivers or other bodies of water. The new utility, the Velocity Mapping Toolbox (VMT), allows rapid processing (vector rotation, projection, averaging and smoothing), visualization (planform and cross-section vector and contouring), and analysis of a range of ADCP-derived datasets. The paper documents the data processing routines in the toolbox and presents a set of diverse examples that demonstrate its capabilities. The toolbox is applicable to the analysis of ADCP data collected in a wide range of aquatic environments and is made available as open-source code along with this publication.

Earth Surface Processes and Landforms↗
USGS2019

Estimating sand concentrations using ADCP‐based acoustic inversion in a large fluvial system characterized by bi‐modal suspended‐sediment distributions

Quantifying sediment flux within rivers is a challenge for many disciplines due, mainly, to difficulties inherent to traditional sediment sampling methods. These methods are operationally complex, high cost, and high risk. Additionally, the resulting data provide a low spatial and temporal resolution estimate of the total sediment flux, which has impeded advances in the understanding of the hydro‐geomorphic characteristics of rivers. Acoustic technologies have been recognized as a leading tool for increasing the resolution of sediment data by relating their echo intensity level measurements to suspended sediment. Further effort is required to robustly test and develop these techniques across a wide range of conditions found in natural river systems. This article aims to evaluate the application of acoustic inversion techniques using commercially available, down‐looking acoustic Doppler current profilers (ADCPs) in quantifying suspended sediment in a large sand bed river with varying bi‐modal particle size distributions, wash load and suspended‐sand ratios, and water stages. To achieve this objective, suspended sediment was physically sampled along the Paraná River, Argentina, under various hydro‐sedimentological regimes. Two ADCPs emitting different sound frequencies were used to simultaneously profile echo intensity level within the water column. Using the sonar equation, calibrations were determined between suspended‐sand concentrations and acoustic backscatter to solve the inverse problem. The study also analyzed the roles played by each term of the sonar equation, such as ADCP frequency, power supply, instrument constants, and particle size distributions typically found in sand bed rivers, on sediment attenuation and backscatter. Calibrations were successfully developed between corrected backscatter and suspended‐sand concentrations for all sites and ADCP frequencies, resulting in mean suspended‐sand concentration estimates within about 40% of the mean sampled concentrations. Noise values, calculated using the sonar equation and sediment sample characteristics, were fairly constant across evaluations, suggesting that they could be applied to other sand bed rivers.

Earth Surface Processes and Landforms↗
USGS2022

River Metabolism Estimation Tools (RiverMET) with demo in the Illinois River Basin

Ecosystem metabolism quantifies the rate of production, maintenance, and decay of organic matter in terrestrial and aquatic systems. It is a fundamental measure of energy flow associated with biomass production by photosynthesizing organisms and biomass oxidation by respiring plants, animals, algae, and bacteria (Bernhardt et al., 2022) . Ecosystem metabolism also provides an understanding of energy flow to higher trophic levels that supports secondary and tertiary productivity, as well as helping to explain when aquatic ecosystems undergo out-of-balance behaviors such as harmful algal blooms and hypoxia. Recent advances in sensor technology and modeling capabilities have enabled estimation of aquatic system metabolism and gas exchange over long time periods in rivers, streams, ponds, and wetlands where oxygen sensors have been deployed. Here we present RiverMET, a framework for estimation of river metabolism, with workflows to streamline data preparation, run a stream metabolism model, assess the model performance, and flag and censor final output data. The workflows are specifically tailored to use streamMetabolizer, a model for one-station calculations of stream metabolism that calculates gross primary productivity (GPP), ecosystem respiration (ER) and the air-water gas exchange rate constant (K600). We advise potential users of RiverMET to review core publications for the streamMetabolizer model (Appling et al., 2018 a, b, c) to ensure best practices that produce the most useful results. We encourage feedback about our workflows, although issues regarding the streamMetabolizer model itself should be referred to the model authors. We tested RiverMET by calculating GPP, ER, and K600 across 17 river sites in the Illinois River basin (ILRB). Each river had between one and nine years of sensor data appropriate for modeling metabolism. In total, metabolism was modeled on 15,176 days between 2005 and 2020. Overall confidence in the results was rated as high at nine river sites, medium at six river sites, and poor at two river sites. Twenty-nine percent of the total modeled days had performance metrics that triggered flags. Metrics used for daily flagging are provided with the final output, with an option to only retain the censored daily outputs with high confidence (representing 72 %, i.e., 10,938 days, of the total days modeled). This work was completed as part of the U.S. Geological Survey Proxies Project, an effort supported by the Water Mission Area (WMA) Water Quality Processes program to develop estimation methods for harmful algal blooms (HABs), per- and polyfluoroalkyl substances (PFAS), and metals, at multiple spatial and temporal scales.

Illinois River Basin↗
USGS2014

In situ and laboratory toxicity of coalbed natural gas produced waters with elevated sodium bicarbonate

Some tributaries in the Powder River Structural Basin, USA, were historically ephemeral, but now contain water year round as a result of discharge of coalbed natural gas (CBNG)-produced waters. This presented the opportunity to study field sites with 100% effluent water with elevated concentrations of sodium bicarbonate. In situ experiments, static renewal experiments performed simultaneously with in situ experiments, and static renewal experiments performed with site water in the laboratory demonstrated that CBNG-produced water reduces survival of fathead minnow ( Pimephales promelas ) and pallid sturgeon ( Scaphirhynchus albus ). Age affected survival of fathead minnow, where fish 2 d posthatch (dph) were more sensitive than 6 dph fish, but pallid sturgeon survival was adversely affected at both 4 and 6 dph. This may have implications for acute assays that allow for the use of fish up to 14 dph. The survival of early lifestage fish is reduced significantly in the field when concentrations of NaHCO 3 rise to more than 1500 mg/L (also expressed as >1245 mg HCO 3 (-) /L). Treatment with the Higgin's Loop technology and dilution of untreated water increased survival in the laboratory. The mixing zones of the 3 outfalls studied ranged from approximately 800 m to 1200 m below the confluence. These experiments addressed the acute toxicity of effluent waters but did not address issues related to the volumes of water that may be added to the watershed.

Environmental Toxicology and Chemistry↗
USGS2014

Metal Mixture Modeling Evaluation project: 2. Comparison of four modeling approaches

As part of the Metal Mixture Modeling Evaluation (MMME) project, models were developed by the National Institute of Advanced Industrial Science and Technology (Japan), the U.S. Geological Survey (USA), HDR⎪HydroQual, Inc. (USA), and the Centre for Ecology and Hydrology (UK) to address the effects of metal mixtures on biological responses of aquatic organisms. A comparison of the 4 models, as they were presented at the MMME Workshop in Brussels, Belgium (May 2012), is provided herein. Overall, the models were found to be similar in structure (free ion activities computed by WHAM; specific or non-specific binding of metals/cations in or on the organism; specification of metal potency factors and/or toxicity response functions to relate metal accumulation to biological response). Major differences in modeling approaches are attributed to various modeling assumptions (e.g., single versus multiple types of binding site on the organism) and specific calibration strategies that affected the selection of model parameters. The models provided a reasonable description of additive (or nearly additive) toxicity for a number of individual toxicity test results. Less-than-additive toxicity was more difficult to describe with the available models. Because of limitations in the available datasets and the strong inter-relationships among the model parameters (log KM values, potency factors, toxicity response parameters), further evaluation of specific model assumptions and calibration strategies is needed.

Environmental Toxicology and Chemistry↗
USGS2018

Nanomaterials in the environment: Behavior, fate, bioavailability, and effects—An updated review

The present review covers developments in studies of nanomaterials (NMs) in the environment since our much cited review in 2008. We discuss novel insights into fate and behavior, metrology, transformations, bioavailability, toxicity mechanisms, and environmental impacts, with a focus on terrestrial and aquatic systems. Overall, the findings were that: 1) despite substantial developments, critical gaps remain, in large part due to the lack of analytical, modeling, and field capabilities, and also due to the breadth and complexity of the area; 2) a key knowledge gap is the lack of data on environmental concentrations and dosimetry generally; 3) substantial evidence shows that there are nanospecific effects (different from the effects of both ions and larger particles) on the environment in terms of fate, bioavailability, and toxicity, but this is not consistent for all NMs, species, and relevant processes; 4) a paradigm is emerging that NMs are less toxic than equivalent dissolved materials but more toxic than the corresponding bulk materials; and 5) translation of incompletely understood science into regulation and policy continues to be challenging. There is a developing consensus that NMs may pose a relatively low environmental risk, but because of uncertainty and lack of data in many areas, definitive conclusions cannot be drawn. In addition, this emerging consensus will likely change rapidly with qualitative changes in the technology and increased future discharges.

Environmental Toxicology and Chemistry↗
USGS1996

Quality control considerations for the determination of acid-volatile sulfide and simultaneously extracted metals in sediments

The determination of acid-volatile sulfide (AVS) and simultaneously extracted metals (SEMs) in sediment by treatment with dilute HCl shows promise as a tool for predicting the potential for metal toxicity to sediment-dwelling organisms. Effective quality control measures must be developed if this method is to become a reliable procedure and to ensure comparability of data. However, establishing quality control measures that assess procedural errors for an operationally defined method can be problematic. For example, preextraction spikes added for assessing the accuracy of AVS and SEMs may be poorly recovered due to adsorption or reaction with sediment constituents. For a variety of sediment types, we found preextraction spikes of sulfide, mercury, and copper to be prone to variable recoveries for the AVS/SEM procedure; recoveries averaged 76.3% (SD, 20.9) for sulfide, 61.9% (39.6) for Hg, and 90.1% (12.7) for Cu. The average recovery was near 100% for preextraction spikes of sediments for Cd, Ni, Pb, and Zn, and the recoveries of preextraction blank spikes for all analytes were consistently 95 to 105%. Binding of Cu or Hg with sulfides is sufficiently strong that 1 N hydrochloric acid will not necessarily keep the spiked metal in the dissolved state. This does not mean that the SEM procedure is invalid for these metals, only that the quality control of procedural error is difficult to assess. However, Hg will generally not be detected when measured as an SEM because of its tendency to adsorb onto sulfide minerals even at extremely low pH. Some reference sediments may be useful for assessing consistency of AVS determinations; we measured 5.97 ± 0.65 μmol/g in National Institute of Standards and Technology (NIST) 1645 and 1.34 ± 0.14 μmol/g in NIST 2704 for repeated determinations conducted over the past 3 years. Apparently, some sediments may contain an oxidation-resistant sulfide component that can release low to moderate AVS when treated with dilute HCl.

Environmental Toxicology and Chemistry↗
USGS2020

Inexpensive, underwater filming of rare fishes in high definition

Generating public interest in fish and their biology is often challenging. Many aquatic species are cryptic and largely invisible to the public. Therefore, increasing public awareness of cryptic fishes and elevating their visibility to broad audiences requires innovation. Inexpensive technological advancements now provide fisheries biologists, managers, and researchers with means never before possible for documenting fish in their natural habitat via underwater videography. We investigated cost efficient and simple methods for capturing and creating high quality, high definition, and informative underwater videos that could be used by people with little or no previous experience in videography. We tested 1) a variety of filming equipment including cameras and camera recording settings, lenses, batteries, and memory cards; 2) active and passive camera deployment techniques; and 3) a variety of free and paid postproduction software and compared them for ease of use, expense, and quality of output. Highest quality footage, i.e., highest resolution, clearest, and most stable, was obtained using a GoPro action camera deployed underwater in a stationary position mounted to a metal base plate using a combination of stock and macro lenses, and filming in 4K resolution at 30 frames per second. Final production videos were created using Adobe Premiere Pro.

Fisheries Magazine↗
USGS2020

Themes of contemporary inland fisheries goals

Goals are important for the effective execution of public trust responsibilities by state inland fisheries bureaus, but formulating meaningful goals is not simple. Often bureaus look to their past and to their sister bureaus in neighboring states when crafting goals for their own freshwater resources. Herein, we review the goal themes of fisheries bureaus using publicly available documents and guided by previous literature. We test whether goals exhibit geographic patterns presuming that differences and similarities in climate, natural resources, and people determine, to various degrees, the goal themes across the U.S. We identified nine distinct goal themes but found that they do not form clear geographic patterns, which contrasts with a similar analysis conducted in the 1970s. Since the 1970s, fisheries bureau goals have expanded and regionalism in goals has vanished. We suggest that changes in perspectives and communication technology, as well as provisions within nationwide funding mechanisms have led to goals becoming more homogenous across the U.S. and more diverse within each bureau.

Fisheries Magazine↗
USGS2024

Side-scan sonar as a tool for measuring fish populations: Current state of the science and future directions

Side-scan sonar (SSS) is a powerful tool that can be used to address many key questions in fisheries science. In principle, SSS uses dual transducers to transmit a narrow-beam, wide-angle acoustic signal as the survey vessel transits an area. The intensity of reflected sound is recorded to generate an image mosaic comprised of benthic substrates and targets in the water column, including organisms such as fish. Although SSS has been around for decades, recent advancements have opened new opportunities to leverage this technology to directly measure fish populations. In this paper, we review the current state of the science and identify opportunities to further refine SSS for fisheries applications.

Fisheries↗
USGS2017

High resolution water body mapping for SWAT evaporative modelling in the Upper Oconee watershed of Georgia, USA

Technological improvements in remote sensing and geographic information systems have demonstrated the abundance of artificially constructed water bodies across the landscape. Although research has shown the ubiquity of small ponds globally, and in the southeastern United States in particular, their cumulative impact in terms of evaporative alteration is less well quantified. The objectives of this study are to examine the hydrologic and evaporative importance of small artificial water bodies in the Upper Oconee watershed in the northern Georgia Piedmont, USA, by mapping their locations and modelling these small reservoirs using the Soil Water Assessment Tool. Comparative Soil Water Assessment Tool models were run with and without the inclusion of small reservoir surface area and volume. The models used meteorological inputs from 1990–2013 to represent years with drought, high precipitation, and moderate precipitation for both the calibration and evaluation periods. Statistical comparison of streamflow indicated that the calibration methodology produced results where the default model simulation without reservoirs fit observed flows more closely than the modified model with small reservoirs included (e.g., Nash–Sutcliffe efficiency of 0.72 vs. 0.64, r 2 of 0.73 vs. 0.66, and percent bias of 11.4 vs. 21.6). In addition, Penman–Monteith, Hargreaves, and Priestley–Taylor evapotranspiration equations were used to estimate actual evaporation from 2,219 small water bodies identified throughout the 1,936.8 km 2 watershed. Depending on the evaporation equation used, water bodies evaporated an average of 0.03–0.036 km 3 /year for the period 2003–2013. Using Penman–Monteith further, if the reservoirs were not considered and average actual evapotranspiration rates from the rest of the basin were applied, only 0.016 km 3 of water would have left the basin as a result of evapotranspiration. This finding suggests construction of small reservoirs increased evaporation by an average of 0.017 km 3 per year (approximately 46,500 m 3 /day). As the construction of small reservoirs continues and high resolution image data used to map these water bodies becomes increasingly available, watershed models that evolve to address the cumulative impacts of small water bodies on evaporation and other hydrologic processes will have greater potential to benefit the water resource management community.

Georgia↗
USGS2021

The Robinson Forest environmental monitoring network: Long‐term evaluation of streamflow and precipitation quantity and stream‐water and bulk deposition chemistry in eastern Kentucky watersheds

The University of Kentucky (U KY) has owned Robinson Forest (37.460723° N, 83.158598° W) since 1923, conducting experiments crucial to understanding the environmental effects of land management in the region. Part of the management of Robinson Forest has been collection of environmental data, including precipitation quantity, bulk‐deposition chemistry, streamflow, stream‐water chemistry, and air and stream temperature. Over the years, these data have been collected and archived using various technologies and have been mostly inaccessible for research use – unedited and uncompiled, scattered across several spreadsheets and paper records. Through a partnership between the U.S. Geological Survey (USGS) and U KY, daily precipitation data for six stations and stream data from four watersheds in Robinson Forest have been compiled for 1971–2018, checked for transcription errors, and annotated for changes in methodologies. These data are available as a USGS data release at https://doi.org/10.5066/P9FPLG1O . Improved accessibility of this data set provides an important research resource for understanding water quality in minimally effected forests in the region. Preliminary results indicate that these data present a valuable opportunity to evaluate linkages among atmospheric deposition and stream chemistry, the effects of environmental policy, such as the Clean Air Act, and effects from nearby land disturbance in the form of surface mining. Furthermore, these data fill a geographic and physiographic gap in what is available to examine deposition and streamflow patterns over the last 45 years, supplementing those long‐term records of research sites in northern (e.g., Hubbard Brook Experimental Forest), central (e.g., Fernow Experimental Forest) and southern Appalachia (e.g., Coweeta Hydrologic Laboratory). As an oasis in the midst of significant surface mining activity, Robinson Forest presents a unique opportunity to understand environmental conditions characteristic of minimally disturbed forests similar to pre‐mining conditions in the Central Appalachian region.

Kentucky↗
USGS2026

Streamflow and surface-water presence data availability across the conterminous United States: A review for headwater systems

Water is essential for life on Earth, supporting ecosystems, human health, and economic activities. Hydrology relies on observational data, and this paper discusses regional and national datasets for the conterminous United States (CONUS) publicly available as of 2023, focusing on headwaters, defined as first- and second-order streams at 1:24000 scale. It identifies 72 primary and secondary datasets and 11 repositories and argues how better integration and accessibility of hydrological data can improve research. The paper distinguishes between datasets where streamflow was the primary data collection objective and those where it was secondary. This distinction highlights opportunities to consider data from efforts peripheral to hydrology but is still useful for understanding hydrologic conditions. The analysis reveals that out of about 118 000 active and inactive stream observation sites, about 6.6% and 25% are located on first- and second-order streams, respectively. This indicates a substantial data gap for headwater systems, which account for over 77% of stream length in CONUS. Federal agencies manage 72% of hydrologic monitoring sites across all stream orders, but only 34% of these are in headwater systems. Academic institutions operate about 2% of sites, with almost half (48%) in headwater systems, focusing on ecosystem research. State agencies also operate about 2% of sites, primarily on larger systems, with 19% on headwaters. Additionally, 23% of sites are managed by multiple agencies. Spatial patterns further reveal pronounced disparities among physiographic regions. Eastern and coastal provinces show relatively dense monitoring, while central and western regions show sparse coverage. These gaps reflect historical priorities, logistical constraints, funding limitations, and the high cost of continuous instrumentation. To address biases in monitoring networks, data collection could be enhanced with low-cost monitoring, community science, and remote sensing technologies. This study also notes the benefits of long-term monitoring and prioritizing retention of streamgages with longer records.

conterminous United States↗
USGS2024

Considerations and challenges in support of science and communication of fish consumption advisories for per- and polyfluoroalkyl substances

Federal, state, tribal, or local entities in the United States issue fish consumption advisories (FCAs) as guidance for safer consumption of locally caught fish containing contaminants. Fish consumption advisories have been developed for commonly detected compounds such as mercury and polychlorinated biphenyls. The existing national guidance does not specifically address the unique challenges associated with bioaccumulation and consumption risk related to per- and polyfluoroalkyl substances (PFAS). As a result, several states have derived their own PFAS-related consumption guidelines, many of which focus on one frequently detected PFAS, known as perfluorooctane sulfonic acid (PFOS). However, there can be significant variation between tissue concentrations or trigger concentrations (TCs) of PFOS that support the individual state-issued FCAs. This variation in TCs can create challenges for risk assessors and risk communicators in their efforts to protect public health. The objective of this article is to review existing challenges, knowledge gaps, and needs related to issuing PFAS-related FCAs and to provide key considerations for the development of protective fish consumption guidance. The current state of the science and variability in FCA derivation, considerations for sampling and analytical methodologies, risk management, risk communication, and policy challenges are discussed. How to best address PFAS mixtures in the development of FCAs, in risk assessment, and establishment of effect thresholds remains a major challenge, as well as a source of uncertainty and scrutiny. This includes developments better elucidating toxicity factors, exposures to PFAS mixtures, community fish consumption behaviors, and evolving technology and analytical instrumentation, methods, and the associated detection limits. Given the evolving science and public interests informing PFAS-related FCAs, continued review and revision of FCA approaches and best practices are vital. Nonetheless, consistent, widely applicable, PFAS-specific approaches informing methods, critical concentration thresholds, and priority compounds may assist practitioners in PFAS-related FCA development and possibly reduce variability between states and jurisdictions. Integr Environ Assess Manag 2024;00:1–20. © 2024 SETAC

Integrated Environmental Assessment and Management↗
USGS2026

Detecting snow avalanche activity using infrasound: Hooker Valley, New Zealand

Snow avalanches pose considerable hazards to people and infrastructure in alpine environments. Traditional avalanche monitoring relies on meteorological data and visual observations, which can be limited in scope and timeliness. Infrasound offers a promising complementary monitoring tool by detecting the low-frequency sound waves generated by avalanches. Here, we present infrasound and camera observations during a 50-day field campaign in the Hooker Valley of Aoraki/Mount Cook National Park, New Zealand. Our study detected seven avalanches with the cameras, whereas the infrasound system identified only one of these events, which was the largest and occurred under conditions that likely favoured infrasound propagation. The infrasound system recorded numerous other events not captured by the cameras, indicating the benefit of further investigation to determine their sources. These findings highlight the potential of infrasound technology for detecting avalanches and providing broad spatial coverage, capturing events in areas not monitored by cameras, while also showcasing limitations in infrasound capabilities. The limited detection of smaller avalanches underscores the opportunity for further research to enhance detection capabilities and understand environmental influences such as snow cover and wind noise. Overall, this study emphasises the utility of multidisciplinary monitoring techniques to improve avalanche detection in alpine environments.

Hooker Valley↗
USGS2019

Multi‐scale habitat selection of elk in response to beetle‐killed forest

Forests of the Rocky Mountains (USA and Canada) have experienced a large‐scale bark‐beetle ( Dendoctronus ponderosae ) epidemic that has led to widespread mortality of pine trees, followed by structural and compositional changes to the forest. The millions of dead trees resulting from this event likely have an effect on ecosystem processes, but currently those effects are mostly unclear. Changes to forest canopy and understory structure are likely to affect behavior and space use of large ungulates as forage abundance, thermal cover, and locomotive costs are presumably altered. We developed and tested hypotheses for how resource selection in summer of female elk ( Cervus canadensis ; n = 47; 2012–2016), the primary large mammal in our study area, was influenced by changes in canopy, understory vegetation, and downed logs in bark‐beetle affected forest in south‐central Wyoming, USA. We employed global positioning system (GPS) technology, an imagery‐derived land cover classification specifically depicting beetle‐affected forest, and on‐the‐ground forest measurements to develop resource and step selection functions. At the study area scale, elk avoided beetle‐killed forest during nearly all parts of the day and selected for intact conifer forest during the day. At the micro‐habitat scale, as canopy cover decreased in beetle‐killed areas, there was a concomitant increase in grass biomass and downed logs. Nevertheless, while in the forest, elk did not alter resource selection relative to changes in understory vegetation or downed logs. The boost in forage abundance within beetle‐killed areas was insufficient to overcome the presumed increases in energy expenditures associated with locomotion and thermoregulation in beetle‐killed forests. The bark‐beetle epidemic has altered how elk use the landscape and has resulted in a potential loss of forest habitat that elk use during the day. Our results indicate that habitat treatments (i.e., fire or harvest) that remove standing dead trees and downed logs in beetle‐killed forest would further facilitate understory growth while reducing the locomotion costs associated with foraging in beetle‐killed forest.

Wyoming, Colorado↗
USGS2020

Bark beetle-affected forests provide elk only a marginal refuge from hunters

For nearly 2 decades, the forests of the Rocky Mountains in the United States experienced a bark-beetle ( Dendoctronus ponderosae ) epidemic. The number of dead and falling trees from this epidemic likely will affect how elk ( Cervus canadensis ) and hunters use the forest and their interactions. Downed trees potentially create a component of refuge habitat that could affect the effectiveness of hunting to regulate abundance of growing elk populations. We evaluated how forests affected by bark beetles in south-central Wyoming, USA, influenced resource selection of 50 female elk and 374 hunters in 2012–2016, and interactions between elk and hunters. We employed global positioning system (GPS) technology on elk and hunters, and developed a satellite-derived land classification specifically depicting beetle-affected forests. We tested the predictions that elk would increase use of beetle-killed areas from summer to the hunting season, and that hunters would avoid beetle-killed areas regardless of elk use. Elk increased use of beetle-killed areas during hunting seasons as did hunters during the archery season; however, during the rifle season, hunters avoided beetle-killed areas. Nevertheless, during the rifle season, areas of beetle-kill with a high probability of elk occurrence dampened the aversion hunters had towards beetle-killed areas. Therefore, in contrast to our expectations, forests that have been altered by the bark-beetle epidemic may only function marginally as a refuge for elk. Our study area was at the beginning of the tree-fall phase (i.e., ~3–7 yr after peak infestation) of the bark-beetle epidemic; thus, future research efforts should focus on how a continued increase in downed trees will influence interactions between elk and hunters. At current levels of tree fall, however, beetle-kill should not limit the ability of managers to regulate elk herds through harvest.

Wyoming↗
USGS2022

Postbreeding movements and molting ecology of female gadwalls and mallards

The wing molt is an important annual life-history event that occurs in waterfowl and molt site selection can play an important role in determining survival. We tracked postbreeding movements of gadwall ( Mareca strepera ) and mallard ( Anas platyrhynchos ) females that bred in the Suisun Marsh (Suisun) of California, USA, to determine molt site selection and wing molt chronology. We attached backpack transmitters with global positioning system and global system for mobile communications (GPS-GSM) technology to female gadwalls and mallards within Suisun and tracked the birds following the breeding season during 2015–2018. We determined molt locations for 52 female gadwalls and 112 female mallards. Thirty of the marked gadwall females selected 2 regions within southern Oregon-northeastern California (SONEC) to undergo molt; 16 molted in the Upper Klamath Basin (southern OR) and 14 in the Lower Klamath Basin (northeastern CA). A large portion of female mallards molted in Suisun ( n = 34) and the Sacramento Valley in California ( n = 31) but also used the Upper Klamath Basin ( n = 13), Lower Klamath Basin ( n = 12), and the Yolo–Delta region in California ( n = 12). On average, gadwalls departed Suisun on 30 July (±17.82 days [SD]), and mallards departed on 24 July (±22.69 days). Mean start date of molt for each species was similar: 27 August (±16.09 days) for gadwalls and 26 August (±21.03 days) for mallards. Molt end date was analogous for each species as well. Molt ended on average 1 October (±15.52 days) for gadwalls and on 5 October (±18.34 days) for mallards. Gadwalls and mallards showed intraspecific differences in average molt start and end date within the 3 main geographical zones: Suisun, Central Valley of California (Central Valley), and SONEC. Mean duration of wing molt for gadwalls was 34.72± 8.62 days and 41.09 ± 12.54 days for mallards. Both species primarily selected permanent marsh to undergo wing molt (gadwalls = 90.4%, mallards = 63.4%). Conservation and active management of these high-use molting areas used by California's primary breeding waterfowl species could enhance postbreeding survival, leading to increased breeding waterfowl populations.

California, Nevada, Oregon↗