Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Surveying and Mapping”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS2013

Flood-inundation maps for the Saluda River from Old Easley Bridge Road to Saluda Lake Dam near Greenville, South Carolina

Digital flood-inundation maps for a 3.95-mile reach of the Saluda River from approximately 815 feet downstream from Old Easley Bridge Road to approximately 150 feet downstream from Saluda Lake Dam near Greenville, South Carolina, were developed by the U.S. Geological Survey (USGS). The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage at Saluda River near Greenville, South Carolina (station 02162500). Current conditions at the USGS streamgage may be obtained through the National Water Information System Web site at http://waterdata.usgs.gov/sc/nwis/uv/?site_no=02162500&PARAmeter_cd=00065,00060,00062. The National Weather Service (NWS) forecasts flood hydrographs at many places that are often collocated with USGS streamgages. Forecasted peak-stage information is available on the Internet at the NWS Advanced Hydrologic Prediction Service (AHPS) flood-warning system Web site (http://water.weather.gov/ahps/) and may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation.In this study, flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The model was calibrated using the most current stage-streamflow relations at USGS streamgage station 02162500, Saluda River near Greenville, South Carolina. The hydraulic model was then used to determine water-surface profiles for flood stages at 1.0-foot intervals referenced to the streamgage datum and ranging from approximately bankfull to 2 feet higher than the highest recorded water level at the streamgage. The simulated water-surface profiles were then exported to a geographic information system, ArcGIS, and combined with a digital elevation model (derived from Light Detection and Ranging [LiDAR] data with a 0.6-foot vertical Root Mean Square Error [RMSE] and a 3.0-foot horizontal RMSE), using HEC-GeoRAS tools in order to delineate the area flooded at each water level. The availability of these maps, along with real-time stage data from the USGS streamgage station 02162500 and forecasted stream stages from the NWS, can provide emergency management personnel and residents with information that is critical during flood-response and flood-recovery activities, such as evacuations, road closures, and disaster declarations.

South Carolina↗
USGS2002

Multibeam mapping of the Los Angeles, California Margin

The Los Angeles, California Margin was mapped using multibeam echosounders during three separate surveys (Figure 1). In 1996, the USGS surveyed the shelf and slope in Santa Monica Bay from Pt. Dume to south of the Palos Verdes Peninsula. The mapping was accomplished using a Kongsberg Simrad EM1000 multibeam sonar system that provided high-quality bathymetry and quantitative backscatter. In 1998, the USGS continued the mapping to the south and surveyed the outer shelf, slope, and proximal basin off Long Beach and Newport using a Kongsberg Simrad EM300 multibeam sonar system. In 1999, the Los Angeles Margin mapping was completed with the surveying of the inner Long Beach shelf from the Palos Verdes Peninsula, south to Newport. This survey used a dual Kongsberg Simrad EM3000D multibeam sonar system. These three surveys were conducted to support USGS projects studying marine pollution and geohazards along the Los Angeles Margin.

California↗
USGS2007

The Miocene Topanga group of southern California — A 100-year history of changes in stratigraphic nomenclature

A review of selected literature summarizes the origin and chronology of changes in usage of 'Topanga' in the Miocene stratigraphic nomenclature of the Los Angeles Basin and adjacent areas in southern California. The review was done to summarize and reconcile some differences in Miocene stratigraphic nomenclature as applied to geologic map compilations of the Santa Ana (Morton, 2004), San Bernardino (Morton and Miller, 2003), Long Beach (Saucedo and others, 2003) and Los Angeles (Yerkes and Campbell, 2005) 30' x 60' quadrangles, all of which are products of the cooperative (California Geological Survey-U.S. Geological Survey) Southern California Areal Mapping Project (SCAMP). The deposition of the Topanga Group spans about 6 my (from as old as about 18 ma to as young as about 12 ma), and the sequence of included strata records changes in provenance and depositional environments that are contemporaneous with part of a major Miocene tectonic episode in southern California -- the 'basin-inception phase' in the evolution of the Neogene Los Angeles basin (Yerkes and others, 1965). The area of Topanga deposition extends to the southern, eastern, northern, and northwestern sides of the Los Angeles basin, as well as the southern part of the eastern Ventura Basin. Topanga beds are inferred to underlie the thick upper Miocene and Pliocene deposits of the central Los Angeles Basin and the southern part of the eastern Ventura Basin; however, they have been reached by drilling only in marginal areas, where the overlying deposits are relatively thin. Post-Topanga strata were deposited in more-restricted areas of rapid subsidence. Selected papers are summarized as they relate to the Topanga nomenclature, and are presented in chronological order.

California↗
USGS2010

Reported Historic Asbestos Mines, Historic Asbestos Prospects, and Other Natural Occurrences of Asbestos in Oregon and Washington

This map and its accompanying dataset provide information for 51 natural occurrences of asbestos in Washington and Oregon, using descriptions found in the geologic literature. Data on location, mineralogy, geology, and relevant literature for each asbestos site are provided. Using the map and digital data in this report, the user can examine the distribution of previously reported asbestos occurrences and their geological characteristics in the Pacific Northwest States of Washington and Oregon. This report is part of an ongoing study by the U.S. Geological Survey to identify and map reported natural asbestos occurrences in the United States, which thus far includes similar maps and datasets of natural asbestos occurrences within the Eastern United States (http://pubs.usgs.gov/of/2005/1189/), the Central United States (http://pubs.usgs.gov/of/2006/1211/), the Rocky Mountain States (http://pubs.usgs.gov/of/2007/1182/), and the Southwestern United States (http://pubs.usgs.gov/of/2008/1095/). These reports are intended to provide State and local government agencies and other stakeholders with geologic information on natural occurrences of asbestos in the United States.

Open-File Report↗
USGS1987

Producing Alaska interim land cover maps from Landsat digital and ancillary data

In 1985, the U.S. Geological Survey initiated a research program to produce 1:250,000-scale land cover maps of Alaska using digital Landsat multispectral scanner data and ancillary data and to evaluate the potential of establishing a statewide land cover mapping program using this approach. The geometrically corrected and resampled Landsat pixel data are registered to a Universal Transverse Mercator (UTM) projection, along with arc-second digital elevation model data used as an aid in the final computer classification. Areas summaries of the land cover classes are extracted by merging the Landsat digital classification files with the U.S. Bureau of Land Management's Public Land Survey digital file. Registration of the digital land cover data is verified and control points are identified so that a laser plotter can products screened film separate for printing the classification data at map scale directly from the digital file. The final land cover classification is retained both as a color map at 1:250,000 scale registered to the U.S. Geological Survey base map, with area summaries by township and range on the reverse, and as a digital file where it may be used as a category in a geographic information system.

Alaska↗
USGS2007

A new towed platform for the unobtrusive surveying of benthic habitats and organisms

Maps of coral ecosystems are needed to support many conservation and management objectives, as well as research activities. Examples include ground-truthing aerial and satellite imagery, characterizing essential habitat, assessing changes, and monitoring the progress of restoration efforts. To address some of these needs, the U.S. Geological Survey developed the Along-Track Reef-Imaging System (ATRIS), a boat-based sensor package for mapping shallow-water benthic environments. ATRIS consists of a digital still camera, a video camera, and an acoustic depth sounder affixed to a moveable pole. This design, however, restricts its deployment to clear waters less than 10 m deep. To overcome this limitation, a towed version has been developed, referred to as Deep ATRIS. The system is based on a light-weight, computer-controlled, towed vehicle that is capable of following a programmed diving profile. The vehicle is 1.3 m long with a 63-cm wing span and can carry a wide variety of research instruments, including CTDs, fluorometers, transmissometers, and cameras. Deep ATRIS is currently equipped with a high-speed (20 frames · s-1) digital camera, custom-built light-emitting-diode lights, a compass, a 3-axis orientation sensor, and a nadir-looking altimeter. The vehicle dynamically adjusts its altitude to maintain a fixed height above the seafloor. The camera has a 29° x 22° field-of-view and captures color images that are 1360 x 1024 pixels in size. GPS coordinates are recorded for each image. A gigabit ethernet connection enables the images to be displayed and archived in real time on the surface computer. Deep ATRIS has a maximum tow speed of 2.6 m · s-1and a theoretical operating tow-depth limit of 27 m. With an improved tow cable, the operating depth can be extended to 90 m. Here, we present results from the initial sea trials in the Gulf of Mexico and Biscayne National Park, Florida, USA, and discuss the utility of Deep ATRIS for map-ping coral reef habitats. Several example mosaics illustrate the high-quality imagery that can be obtained with this system. The images also reveal the potential for unobtrusive animal observations; fish and sea turtles are unperturbed by the presence of Deep ATRIS

Florida↗
USGS2019

Topographic change detection at Chalk Cliffs, Colorado, USA, using Airborne LiDAR and UAS-based Structure-from-Motion photogrammetry

The Chalk Cliffs debris-flow site is a small headwater catchment incised into highly fractured and hydrothermally altered quartz monzonite in a semi-arid climate. Over half of the extremely steep basin is exposed bedrock. Debris flows occur multiple times per year in response to rainstorm events, typically during the summer monsoon season. The frequency of debris flows, and the uniformity of the underlying rock, make Chalk Cliffs an ideal study catchment for translating mechanistic understanding of natural debris flows to other sites. A 2008 National Center for Airborne Laser Mapping (NCALM) Airborne LiDAR survey provides baseline topography for the site; however, heretofore there has been no systematic effort to collect repeat topography of the entire site. Starting in May 2018, we made repeat surveys of the basin with an unmanned aircraft system (UAS). The UAS-based imagery was processed into (x, y, z) point clouds using Structure-from-Motion (SfM) photogrammetry. We geo-registered the point clouds using 12 ground control points placed within and around the study basin. In this study we compare the LiDAR with one SfM point cloud to assess topographic change over a 10-year time period. The difference map provides observational data relevant to understanding sediment provenance and transport at the Chalk Cliffs. The difference image indicates erosion of colluvial surfaces, with limited deposition in the survey area. Some colluvial hillslopes show spatially uniform erosion while others experienced concentrated erosion of up to three meters depth over a ten-year period.

Colorado↗
USGS1997

Digital shaded-relief image of Alaska

One of the most spectacular physiographic images of the conterminous United States, and the first to have been produced digitally, is that by Thelin and Pike ( USGS I-2206, 1991 ). The image is remarkable for its crispness of detail and for the natural appearance of the artificial land surface. Our goal has been to produce a shaded-relief image of Alaska that has the same look and feel as the Thelin and Pike image. The Alaskan image could have been produced at the same scale as its lower 48 counterpart (1:3,500,000). But by insetting the Aleutian Islands into the Gulf of Alaska, we were able to print the Alaska map at a larger scale (1:2,500,000) and about the same physical size as the Thelin and Pike image. Benefits of the 1:2,500,000 scale are (1) greater resolution of topographic features and (2) ease of reference to the U.S. Geological Survey (USGS) (1987) Alaska Map E and the statewide geologic map (Beikman, 1980), which are both 1:2,500,000 scale. Manually drawn, shaded-relief images of Alaska's land surface have long been available (for example, Department of the Interior, 1909; Raisz, 1948). The topography depicted on these early maps is mainly schematic. Maps showing topographic contours were first available for the entire State in 1953 (USGS, 1:250,000) (J.H. Wittmann, USGS, written commun., 1996). The Alaska Map E was initially released in 1954 in both planimetric (revised in 1973 and 1987) and shaded-relief versions (revised in 1973, 1987, and 1996); topography depicted on the shaded-relief version is based on the 1:250,000-scale USGS topographic maps. Alaska Map E was later modified to include hypsometric tinting by Raven Maps and Images (1989, revised 1993) as copyrighted versions. Other shaded-relief images were produced for The National Geographic Magazine (LaGorce, 1956; 1:3,000,000) or drawn by Harrison (1970; 1:7,500,000) for The National Atlas of the United States. Recently, the State of Alaska digitally produced a shaded-relief image of Alaska at 1:2,500,000 scale (Alaska Department of Natural Resources, 1994), using the 1,000-m digital elevation data set referred to below. An important difference between our image and these previous ones is the method of reproduction: like the Thelin and Pike (1991) image, our image is a composite of halftone images that yields sharp resolution and preserves contrast. Indeed, the first impression of many viewers is that the Alaskan image and the Thelin and Pike image are composites of satellite-generated photographs rather than an artificial rendering of a digital elevation model. A shaded-relief image represents landforms in a natural fashion; that is, a viewer perceives the image as a rendering of reality. Thus a shaded-relief image is intrinsically appealing, especially in areas of spectacular relief. In addition, even subtle physiographic features that reflect geologic structures or the type of bedrock are visible. To our knowledge, some of these Alaskan features have not been depicted before and so the image should provide earth scientists with a new "look" at fundamental geologic features of Alaska.

Alaska↗
USGS2008

Reported Historic Asbestos Mines, Historic Asbestos Prospects, and Natural Asbestos Occurrences in the Southwestern United States (Arizona, Nevada, and Utah)

This map and its accompanying dataset provide information for 113 natural asbestos occurrences in the Southwestern United States (U.S.), using descriptions found in the geologic literature. Data on location, mineralogy, geology, and relevant literature for each asbestos site are provided. Using the map and digital data in this report, the user can examine the distribution of previously reported asbestos occurrences and their geological characteristics in the Southwestern U.S., which includes sites in Arizona, Nevada, and Utah. This report is part of an ongoing study by the U.S. Geological Survey to identify and map reported natural asbestos occurrences in the U.S., which thus far includes similar maps and datasets of natural asbestos occurrences within the Eastern U.S. (http://pubs.usgs.gov/of/2005/1189/), the Central U.S. (http://pubs.usgs.gov/of/2006/1211/), and the Rocky Mountain States (http://pubs.usgs.gov/of/2007/1182/. These reports are intended to provide State and local government agencies and other stakeholders with geologic information on natural occurrences of asbestos in the U.S.

Open-File Report↗
USGS2013

Cold-seep habitat mapping: high-resolution spatial characterization of the Blake Ridge Diapir seep field

Relationships among seep community biomass, diversity, and physiographic controls such as underlying geology are not well understood. Previous efforts to constrain these relationships at the Blake Ridge Diapir were limited to observations from piloted deep-submergence vehicles. In August 2012, the autonomous underwater vehicle (AUV) Sentry collected geophysical and photographic data over a 0.131 km2 area at the Blake Ridge Diapir seeps. A nested survey approach was used that began with a regional or reconnaissance-style survey using sub-bottom mapping systems to locate and identify seeps and underlying conduits. This survey was followed by AUV-mounted sidescan sonar and multibeam echosounder systems mapping on a mesoscale to characterize the seabed physiography. At the most detailed survey level, digital photographic imaging was used to resolve sub-meter characteristics of the biology. Four pockmarks (25–70 m diameter) were documented, each supporting chemosynthetic communities. Concentric zonation of mussels and clams suggests the influence of chemical gradients on megafaunal distribution. Data collection and analytical techniques used here yield high-resolution habitat maps that can serve as baselines to constrain temporal evolution of seafloor seeps, and to inform ecological niche modeling and resource management.

Deep-Sea Research Part II: Topical Studies in Ocea↗
USGS2007

Investigation of wind and water level for the Giacomini Wetland Restoration Project, Point Reyes National Seashore

Point Reyes National Seashore (PRNS), comprising unique elements of geological, biological, and historical interest, is located on the central California coast approximately 60 km northwest of San Francisco. The National Seashore contains nearly 130 km of exposed and protected shorelines, spectacular coastal cliffs and headlands, lagoons, open grasslands, bushy hillsides, and forested ridges. Approximately 30 km of the shoreline are coastal-dune habitat that supports 11 federally listed species, including the threatened western snowy plover and the endangered plants Tidestrom's lupine ( Lupinus tidestromii ) and beach layia ( Layia carnosa ). The San Andreas Fault, a right-lateral strike-slip fault, trends northwest along the northeastern side of the park. Tomales Bay, which is straight, long, narrow, and shallow, runs along the northeastern boundary of PRNS. The Bay, which fills the northwestern end of a rift valley at the intersection of the San Andreas Fault with the coastline, is approximately 20 km long, 2 km wide, and 6 m deep with mountainous terrain to the southwest and rolling hills to the northeast. Tomales Bay is one of the cleanest estuaries on the West Coast. In winter, approximately 17,000 to 20,000 shorebirds inhabit Tomales Bay and Bodega Bay, which lies directly to the north. At the head of Tomales Bay, the Giacomini Ranch comprises 563 acres of pastureland currently being used for grazing dairy cattle. After more than 50 years of operation as a dairy, the National Park Service acquired the Giacomini property with the intention to restore most of it and the nearby Olema Marsh to tidal wetland. Restoration will add approximately 4% to the existing coastal wetlands in California. The project will return the headwaters of Tomales Bay and two major stream intersections to an intertidal marsh environment, enhancing habitat for both wildlife and fish populations and contributing to the long-term health of Tomales Bay. Prior to the establishment of the ranch, the area was primarily salt marsh that formed as the delta of Lagunitas Creek expanded into Tomales Bay. In converting the salt marsh to dairy land, levees and tide gates were constructed to prevent tidal incursion and stream flooding. Those levees have significantly altered the patterns of estuarine circulation and sediment deposition. To restore natural hydrologic processes within the area and to promote the return of ecological functions and processes, the levees will have to be breached or removed. Developing a successful restoration strategy requires knowledge of elevations within the pastureland and the range of water depths that can be expected from tidal, river, and wind action. In support of the restoration program, the USGS provides technical assistance to PRNS in the form of a scientific study focusing on understanding the physical processes that could affect the Giacomini wetland restoration. The study will yield scientific products that NPS resource managers can use in designing and implementing the restoration project. Research elements include: - Develop a Geodetic Control Network (GCN) throughout PRNS that meets the standards specified National Geodetic Survey data base (the NGS "Bluebook"). The grid will allow this and future studies to be conducted to a precision commensurate with the expressed goals of PRNS. The survey will consist of three steps: (1) verify existing GPS control monuments in the area; (2) tie control monuments in the study areas to the GPS control monuments; and (3) establish NAVD88 elevations using a digital electronic level. - Conduct a detailed survey of the Giacomini site to produce an accurate topographic map of the property. The site survey can be coupled with on-site water-level measurements to produce an empirical flooding model. - Measure water level and wind regime at the Giacomini site. The water-level range is critical to determining the wetland types based on the elevation of the dairy land. Water level at Sacramento Landing, in central Tomales Bay, will also be measured for comparison. As of November 2005, we have created a GCN, produced a detailed topographic map of the Giacomini site, and collected approximately three years of water-level and wind data at the Giacomini site and over one year of usable water-level data at the Sacramento Landing pier.

California↗
USGS1952

Preliminary report on the White Canyon area, San Juan county, Utah

The White Canyon area, in the central part of San Juan County, Utah, consists of approximately two 15-minute quadrangles. Approximately 75 square miles have been mapped by the Geological Survey on a scale of 1 inch equals 1 mile, using a combined aerial photography-plane table method. Structure contours were drawn on top of the Organ Rock member of the Cutler formation. Parts of the Gonway and North Point claims, 1/4 mile east of the Happy Jack mine, were mapped in detail. The principal objectives of the investigations were: (1) to establish ore guides; (2) to select areas favorable for exploration; and (3) to map the general geology and to determine the regional relationships of the uranium deposits. The White Canyon area is comprised of sedimentary rocks of Carboniferous to Jurassic age, more than 2,000 feet thick, having a regional dip of 1° to 2° SW. The nearest igneous rocks are in the Henry Mountains about 7 miles west of the northern part of the area; The Shinarump conglomerate of the late Triassic age, the principal ore horizon in the White Canyon area, consists of lenticular beds of sandstone, conglomeratic sandstone, conglomerate, clay, and siltstone. The Shinarump conglomerate, absent in places, is as much as 75 feet thick. The sandstones locally contain molds of logs and fragments of altered volcanic ash. Some of the logs have been replaced by copper and uranium minerals and iron oxides. The clay and siltstone underlie and are interbedded with the sandstone, and are most common in channels that cut into the underlying Moenkopi formation. The Shinarump conglomerate contains reworked Moenkopi siltstone fragments, clay balls, carbonized wood, and pebbles of quarts, quartzite, and chert. Jointing is prominent in the Western part of the mapped area. The three most prominent joint trends are due east, N. 65°-75° W., and N. 65°-75° E. All joints have vertical dips. The red beds are bleached along some joints, especially those that trend N. 65°-75° W. All uranium ore produced has been from the lower part of the Shinarump conglomerate, where it commonly occurs with copper as disseminations and fracture coatings in sandstone. Uranium and copper minerals also occur in low-grade disseminated deposits in the lower Chinle and in the Moenkopi formation and in veins cutting these formations. Although some uranium deposits occur in Chinarump channels and scours, copper and uranium minerals along fractures suggest that channel control may be secondary. Logs and clay balls apparently have exerted some chemical influences for deposition. The uranium occurs as the oxide in some deposits, and as secondary hydrous sulfates, phosphates, oxides, and silicates in these and several other deposits. Charcoal, iron and manganese oxides, and veinlets of hydrocarbon are abnormally radioactive in most of the deposits. Base-metal sulfides are commonly found inside the oxidized zone. Secondary copper minerals include the hydrous sulfates and carbonate. Gangue minerals include quarts, clay minerals, and manganese oxides, dickite (?), calcite, gypsum, pyrite, and chalcedony (?). Principal wall-rock alteration appears to have been silicification, clay alteration, and bleaching. Most of the shipped ore has contained more than 0.3 percent uranium. The ore also contains copper, commonly in grades lower than 1.0 percent. Criteria believed to be most useful for prospecting for concealed uranium deposits are (1) visible uranium minerals; (2) sulfide minerals; (3) secondary copper minerals; (4) dickite (?); (5) hydrocarbons; and (6) bleaching and alteration of the Moenkopi formation.

Utah↗
USGS2014

Preliminary interpretation of pre-2014 landslide deposits in the vicinity of Oso, Washington

High-resolution topographic surveys allow fairly precise mapping of landslide deposits and their relative ages. Relative ages are determined by cross-cutting relations and the amount of smoothing—more smoothed slide deposits are older—of these deposits. The Tulalip Tribes, in partnership with the Puget Sound Lidar Consortium, acquired a high-resolution lidar (light detection and ranging) survey of the North Fork Stillaguamish River valley in 2013. This report presents a preliminary interpretation of the topography of this area using the lidar data at a scale of 1:24,000.

Washington↗
USGS1992

Map showing bottom topography of the Pacific Continental Margin, Cape Mendocino to Point Conception

All contours, geographic outlines, and political boundaries shown on this map of the bottom topography, or bathymetry, of the Pacific continental margin between 34? and 41? N. latitudes were plotted from digital data bases in the library of the U.S. Geological Survey (USGS)-National Oceanic and Atmospheric Administration (NOAA) Joint Office for Mapping and Research (JOMAR). These digital data were obtained and compiled from many sources; consequently, data quality varies within particular data bases as well as from one data base to another. Bathymetric contours were digitized from a map compiled by Chase and others (1981) and from the unpublished large scale versions of that map (T.E. Chase, unpub. maps, 1981). Data for the area seaward of the continental slope (~2000 m depth) were obtained primarily from the U.S. Coast and Geodetic Survey (C&GS) 1955 Pacific Exploratory Survey, a systematic and detailed (~8 -nmi trackline spacing) survey between Mexico and Canada. The USGS provided data from cruises S3-78-NC, S15-79-NC, L2-77-NC, Ll0-76-NC, and Bartlett 72. Data were also obtained from Scripps Institution of Oceanography cruises Merazine, Blue Flash, Kayak B, Scan I, and Seven Tow (Chase and Menard, 1971; Chase and others, 1975; Wilde and others, 1976; Wilde and others, 1978). The 200-m contour was derived from the National Ocean Survey charts 1306N-20 (1975), 1307N-l1B (1974a), 1307N-18B (1974b), and C&GS chart 1308N-12 (1969). Sea-floor depths were corrected for sound velocity in sea water using Matthew's (1939) tables. Onshore topographic contours were generated by computer from a modified version of 3-arc-second elevation data provided by the Defense Mapping Agency. The United States digital shoreline was obtained from the NOAA, NOS, Nautical Charting Division, National Atlas files. The coastline of Canada was digitized from Canadian Hydrographic Service bathymetric maps. The primary source of names of the sea floor features was the "Gazetteer of Undersea Features" (Defense Mapping Agency, 1990). Acknowledgments Christopher Hines assisted in the construction and verification of the digital data bases. Reviews and suggestions by Edward C. Escowitz and Florence Wong and advice provided by Will Stettner regarding the cartographic design substantially improved the quality of this map. References Cited Chase, T.E., and Menard, H.W., 1971, Bathymetric atlas of the northeastern Pacific Ocean: U.S. Naval Oceanographic Office Publication 1303, scale 1:2,000,000 at 33° latitude, 48 p. Chase, T.E., Wilde, Pat, and Normark, W.R., 1975, Oceanographic data of the Monterey Deep Sea Fan: San Diego, University of California, Institute of Marine Resources Publication TR 58, scale 1:898,524 at 35° latitude. Chase, T.E., Wilde, Pat, Normark, W.R., Miller, C.P., Seekins, B.A., and Young, J.D., 1981, Offshore topography of the Western United States between 32° and 49° North latitudes: U.S. Geological Survey Open-File Report 81-443, scale 1:864,518 at 38° latitude, 2 sheets. Coast and Geodetic Survey, 1969, Point St. George to Point Delgada: Coast and Geodetic Survey Bathymetric Map 1308N-12, scale 1:250,000. Defense Mapping Agency, 1990, Gazetteer of undersea features (4th ed.): Washington, D.C., Defense Mapping Agency. Matthews, D.J., 1939, Tables of the velocity of sound in pure water and sea water (2d ed.): London, Admiralty, Hydrographic Department, H.D. 282, 52 p. National Ocean Survey, 1974a, Vicinity Pt. Sur to Pt. Reyes: National Ocean Survey Bathymetric Map 1307N-11B, scale 1:250,000. National Ocean Survey, 1974b, Pt. Reyes to Tolo Bank: National Ocean Survey Bathymetric Map 1307N-18B, scale 1:250,000. National Ocean Survey, 1975, Cape San Martin to Point Conception: National Ocean Survey Bathymetric Map 1306N-20, scale 1:250,000. Wilde, Pat, Normark, W.R., and Chase, T.E., 1976, Oceanographic data off central California 37° to 40° North including the Delgada Deep Sea Fan: Berkeley, University of California, Lawrence Berkeley Laboratory Publication 92, scale 1 :864,581 at 38° latitude. Wilde, Pat, Chase, T.E., Holmes, M.L., Normark, W.R., Thomas, J.A., McCulloch, D.S., and Kulm, L.D., 1978, Oceanographic data off northern California-southern Oregon 40° to 43° North including the Gorda Deep Sea Fan: Berkeley, University of California, Lawrence Berkeley Laboratory Publication 251, scale 1:815,482 at 42° latitude.

IMAP↗
USGS2014

Characterization of deep coral and sponge communities in the Gulf of the Farallones National Marine Sanctuary: Rittenburg Bank, Cochrane Bank and the Farallon Escarpment.

Benthic surveys were conducted in the Gulf of Farallones National Marine Sanctuary (GFNMS) aboard R/V Fulmar, October 3-11, 2012 using the large observation-class remotely operated vehicle (ROV) Beagle. The purpose of the surveys was to groundtruth mapping data collected in 2011, and to characterize the seafloor biota, particularly corals and sponges, in order to support Essential Fish Habitat designations under Magnuson-Stevens Act (MSA) and other conservation and management goals under the National Marine Sanctuaries Act (NMSA). A total area of 25,416 sq. meters of sea floor was surveyed during 34 ROV transects. The overall research priorities were: (1) to locate and characterize DSC and sponge habitats in priority areas; (2) to collect information to help understand the value of DSCs and sponges as reservoirs of biodiversity, or habitat for associated species, including commercially important fishes and invertebrates; (3) to assess the condition of DSC/sponge assemblages in relation to potential anthropogenic or environmental disturbances; and (4) to make this information available to support fisheries and sanctuary management needs under MSA and NMSA requirements.

he Gulf of the Farallones National Marine Sanctuar↗
USGS1997

Proceedings of a workshop on digital mapping techniques; methods for geologic map data capture, management, and publication - June 2 - 5, 1997, Lawrence, Kansas

Introduction: From June 2-5, 1997, selected technical representatives of the USGS and State geological surveys participated in the 'AASG/USGS Digital Mapping Techniques' workshop in Lawrence, Kansas. The workshop was initiated by the AASG/USGS Data Capture Working Group, and was hosted by the Kansas Geological Survey (KGS). With a focus on methods for data capture and digital map production, the goal was to help move the state surveys and the USGS toward development of more cost-effective, flexible, and useful systems for digital mapping and GIS analysis.

Open-File Report↗
USGS2023

Overview of the Cenozoic geology of the northern Harrat Rahat volcanic field, Kingdom of Saudi Arabia

The Harrat Rahat volcanic field, located in the west-central part of the Kingdom of Saudi Arabia, is one of the larger Cenozoic harrats among the more than 17 harrats situated upon the Arabia Plate. The map plate contained herein shows, at a scale of 1:100,000, the mapped volcanic geology of northern Harrat Rahat, which consists of the northernmost one-fifth of Harrat Rahat. Northern Harrat Rahat has an area of about 3,340 square kilometers (km 2 ), of which 2,567 km 2 is covered by Harrat Rahat volcanic rocks and deposits, and it encompasses more than 900 exposed vents (that is, craters, cryptodomes, maars, and scoria cones), 289 of which are isolated by younger volcanic deposits and have not been correlated with the 234 volcanic rock units distinguished by geologic mapping. Northern Harrat Rahat is of special interest owing to its proximity to the city of Al Madinah al Munawwarah, which sits within, and is continuing to expand southward over, the north end of the volcanic field. Al Madinah is home to an expanding population, currently at more than 2 million residents, together with the intermittent addition of approximately 3 million pilgrims during Hajj and Umrah (religious visitations). The center of Al Madinah is less than 8 km from lava flows of the only confirmed historically documented eruption, which occurred in 1256 C.E. (654 A.H.). Earlier prehistoric lava flows also encroached into the area of the present-day city limits, as demonstrated by volcanic rocks exposed widely throughout the city in roadcuts, parks, and excavations for new buildings, although no evidence has been found of any other than the 1256 C.E. lava having reached that area during times of human habitation. Geologic mapping was undertaken by the U.S. Geological Survey in collaboration with the Saudi Geological Survey. The features of primary interest within the map area are scoria cones, lava flows, lava domes, craters, and pyroclastic deposits from the Quaternary, which have compositions of basalt, hawaiite, mugearite, benmoreite, and trachyte. The geologic mapping was published by Downs and others (2019) on a single sheet at 1:75,000 scale and two detailed sheets at 1:25,000 scale, accompanied by detailed explanations of the geology. This report presents the geology on a single sheet at 1:100,000 scale and provides condensed geologic explanations for the convenience of readers of this volume. Some minor errors of nomenclature and lava source regions that do not change fundamental interpretations have been corrected herein.

Professional Paper↗