Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Resources and Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources

Spatial mapping and attribution of Wyoming wind turbines

This Wyoming wind-turbine data set represents locations of wind turbines found within Wyoming as of August 1, 2009. Each wind turbine is assigned to a wind farm. For each turbine, this report contains information about the following: potential megawatt output, rotor diameter, hub height, rotor height, land ownership, county, wind farm power capacity, the number of units currently associated with its wind farm, the wind turbine manufacturer and model, the wind farm developer, the owner of the wind farm, the current purchaser of power from the wind farm, the year the wind farm went online, and the status of its operation. Some attributes are estimates based on information that was obtained through the American Wind Energy Association and miscellaneous online reports. The locations are derived from August 2009 true-color aerial photographs made by the National Agriculture Imagery Program; the photographs have a positional accuracy of approximately ?5 meters. The location of wind turbines under construction during the development of this data set will likely be less accurate than the location of turbines already completed. The original purpose for developing the data presented here was to evaluate the effect of wind energy development on seasonal habitat used by greater sage-grouse. Additionally, these data will provide a planning tool for the Wyoming Landscape Conservation Initiative Science Team and for other wildlife- and habitat-related projects underway at the U.S. Geological Survey's Fort Collins Science Center. Specifically, these data will be used to quantify disturbance of the landscape related to wind energy as well as quantifying indirect disturbances to flora and fauna. This data set was developed for the 2010 project 'Seasonal predictive habitat models for greater sage-grouse in Wyoming.' This project's spatially explicit seasonal distribution models of sage-grouse in Wyoming will provide resource managers with tools for conservation planning. These specific data are being used for assessing the effect of disturbance resulting from wind energy development within Wyoming on sage-grouse populations.

Data Series↗

Subsidies from anadromous sea lamprey ( Petromyzon marinus ) carcasses function as a reciprocal nutrient exchange between marine and freshwaters

Nutrient and energy flows across ecosystem boundaries subsidize recipient communities and influence bottom‐up processes in food webs. Migratory fish such as anadromous sea lamprey provide a pulse of marine‐derived nutrients and energy to Atlantic coastal streams in spring when organisms would otherwise be subject to limiting resources. We conducted sea lamprey carcass addition experiments to characterize the role of subsidies on producer and consumer trophic pathways by manipulating subsidy quantity and light exposure. We demonstrated that producer and decomposer productivity is constrained by nutrients during spring; however, these limitations were reduced in producers as light limitations intensified through riparian shading. We observed no significant effects of increasing carcass subsidies on producer and decomposer biomass. Our results suggest that high densities of carcass subsidies may stimulate primary productivity; however, these effects are mediated by the degree of riparian shading, which demonstrated a onefold to fourfold difference in biomass accrual. In addition, sea lamprey carcass nutrients were captured by larval conspecifics. Stable isotopes analysis demonstrated that adult sea lamprey carcass tissue was relatively enriched in 15 N and 13 C isotopes compared with larvae. We observed significant enrichment in the 13 C isotope among larvae sampled after 2 and 4 weeks of exposure to adult carcass nutrients. Our work suggests that a portion of sea lamprey subsidies serve as a reciprocal exchange between freshwaters and the ocean. We highlight that this cross‐ecosystem linkage is likely influenced by subsidy quantity from donor systems and is mediated by environmental characteristics affecting the recipient system.

River Research and Applications↗

Methane hydrates

Gas hydrate is a solid, naturally occurring substance consisting predominantly of methane gas and water. Recent scientific drilling programs in Japan, Canada, the United States, Korea and India have demonstrated that gas hydrate occurs broadly and in a variety of forms in shallow sediments of the outer continental shelves and in Arctic regions. Field, laboratory and numerical modelling studies conducted to date indicate that gas can be extracted from gas hydrates with existing production technologies, particularly for those deposits in which the gas hydrate exists as pore-filling grains at high saturation in sand-rich reservoirs. A series of regional resource assessments indicate that substantial volumes of gas hydrate likely exist in sand-rich deposits. Recent field programs in Japan, Canada and in the United States have demonstrated the technical viability of methane extraction from gas-hydrate-bearing sand reservoirs and have investigated a range of potential production scenarios. At present, basic reservoir depressurisation shows the greatest promise and can be conducted using primarily standard industry equipment and procedures. Depressurisation is expected to be the foundation of future production systems; additional processes, such as thermal stimulation, mechanical stimulation and chemical injection, will likely also be integrated as dictated by local geological and other conditions. An innovative carbon dioxide and methane swapping technology is also being studied as a method to produce gas from select gas hydrate deposits. In addition, substantial additional volumes of gas hydrate have been found in dense arrays of grain-displacing veins and nodules in fine-grained, clay-dominated sediments; however, to date, no field tests, and very limited numerical modelling, have been conducted with regard to the production potential of such accumulations. Work remains to further refine: (1) the marine resource volumes within potential accumulations that can be produced through exploratory drilling programs; (2) the tools for gas hydrate detection and characterisation from remote sensing data; (3) the details of gas hydrate reservoir production behaviour through additional, well-monitored and longer duration field tests and (4) the understanding of the potential environmental impacts of gas hydrate resource development. The results of future production tests, in the context of varying market and energy supply conditions around the globe, will be the key to determine the ultimate timing and scale of the commercial production of natural gas from gas hydrates.

Book chapter↗

A bootstrap approach to computing uncertainty in inferred oil and gas reserve estimates

This study develops confidence intervals for estimates of inferred oil and gas reserves based on bootstrap procedures. Inferred reserves are expected additions to proved reserves in previously discovered conventional oil and gas fields. Estimates of inferred reserves accounted for 65% of the total oil and 34% of the total gas assessed in the U.S. Geological Survey’s 1995 National Assessment of oil and gas in US onshore and State offshore areas. When the same computational methods used in the 1995 Assessment are applied to more recent data, the 80-year (from 1997 through 2076) inferred reserve estimates for pre-1997 discoveries located in the lower 48 onshore and state offshore areas amounted to a total of 39.7 billion barrels of oil (BBO) and 293 trillion cubic feet (TCF) of gas. The 90% confidence interval about the oil estimate derived from the bootstrap approach is 22.4 BBO to 69.5 BBO. The comparable 90% confidence interval for the inferred gas reserve estimate is 217 TCF to 413 TCF. The 90% confidence interval describes the uncertainty that should be attached to the estimates. It also provides a basis for developing scenarios to explore the implications for energy policy analysis.

Natural Resources Research↗

Mineral resource database for deposits related to the Mesoproterozoic Midcontinent Rift System, United States and Canada

The Midcontinent Rift System (MRS) of North America is one of the world’s largest continental rifts and has an age of 1.1 Ga (giga-annum). The MRS hosts a diverse suite of magmatic and hydrothermal mineral deposits in the Lake Superior region where rift rocks are exposed at or near the surface. As part of the construction of a database summarizing information on mineral deposits in the MRS, data from regional mineral deposits were downloaded from the U.S. Geological Survey (USGS) Mineral Resources Data System (MRDS), the USGS Mineral Deposit Database (USMIN), and the Ontario Ministry of Energy, Northern Development and Mines Mineral Deposit Inventory (MDI). Deposits related to MRS rocks or mineralizing events were identified and compiled into a database to develop a space/time classification for MRS-related mineral deposits. Information from MRDS, USMIN, and MDI records and from the extensive literature describing MRS mineral deposits was used to classify each entry by deposit type, host rock age and type, and estimated mineralization age. Most deposits were readily classified because of unique mineralogy, location, or well-constrained host rock. These deposits were then put into a tectonic evolutionary framework for the MRS, which showed that many deposits formed within discrete spatial and temporal stages of rift evolution.

Mesoproterozoic Midcontinent Rift System↗

Annotated bibliography of scientific research relevant to oil and gas reclamation best management practices in the western United States, published from 1969 through 2020

Integrating recent scientific knowledge into management decisions supports effective natural resource management and can lead to better resource outcomes. However, finding and accessing scientific knowledge can be time consuming and costly. To assist in this process, the U.S. Geological Survey has created a series of annotated bibliographies on topics of management concern for lands in the western United States (U.S.). Oil and gas development on public lands is a long-standing and substantial component of local and regional economies and has expanded in recent decades, particularly on public lands in the western U.S. This development is associated with extensive networks of pipelines, roads, and processing facilities, across which reclamation is Federally mandated following initial well pad development (“interim” reclamation) and once resource extraction is complete (“final” reclamation). Reclamation is critical for recovering ecological services to energy-affected lands, including vegetation productivity, wildlife habitat, water and air quality, and soil stability (for example, resistance to wind and water erosion). However, reclamation of oil and gas affected lands in the western U.S. has proved challenging due to an array of regulatory and environmental factors, such as minimally developed soils, short growing seasons, herbivory, high winds, invasive species, rugged terrain, and in particular, arid climates associated with low total precipitation, high evapotranspiration rates, and highly variable precipitation patterns. We compiled and summarized journal articles, government reports, technical reports, proceedings, and theses and dissertations relevant to oil and gas reclamation. We constrained our search to products published on or before December 31, 2020 but did not limit our search by a starting date; the earliest product resulting from this effort was published in March 1969. Second, we manually scanned the last 15 years (2005-2020) of tables of contents in journals, bibliographies, and proceedings of which we were aware would contain articles highly relevant to this bibliography. We carried out the search for these products through multiple means: (1) performing a structured search of two reference databases, (2) examining articles published since 2005 in highly relevant scientific journals and conference proceedings, and (3) reviewing additional material suggested by authors of products identified in steps 1 and 2. Our search was intentionally broad in order to identify as much relevant work as possible, much of which is professionally applied and tested within the industry of oil and gas reclamation, but which remains unpublished in scientific journals. We refined the initial list of products by removing: (1) duplicates, (2) products not written in English, (3) products that were not relevant to the arid ecosystems of western North America, (4) products that were not released as research, data products, or review articles in journals or as formal scientific reports, and (5) products with data which were not relevant to reclamation of oil and gas-affected lands, or for which the study did not present new data, findings, or syntheses relevant to reclamation of oil and gas-affected lands. We summarized each product using a consistent structure (background, objectives, methods, location, findings, and implications) and assigned standardized management topics to each. Management topics are intended to aid online searching within the bibliography and are described in more detail in the Methods Section of this report; they include what type of disturbance the product addresses (well pads, mining, pipelines), what aspect of oil and gas reclamation they pertain to (practices, standards, monitoring), what type of data are present in the product (for instance soil or vegetation recovery data), and an indication if the product were from a source other than a published, peer-reviewed outlet (such as dissertations or unpublished professional reports – these are identified as grey literature). The review process for this annotated bibliography included an initial internal colleague review of each summary, requesting input on each summary from an author of the original product, and a formal peer-review. Our initial searches resulted in 3,197 total products, of which 290 met our criteria for inclusion. “Reclamation Practices” is by far the management topic most addressed, followed by “Reclamation Monitoring,” for example, products assessing what and how monitoring methods are used to track and measure reclamation outcome. This document may be accessed at https://doi.org/10.3133/ofr20231068 or from the U.S. Geological Survey Publication Warehouse ( https://pubs.usgs.gov/ ). The 1-page product summaries herein will also be used to create a bibliography at https://apps.usgs.gov/science-for-resource-managers that includes links to each original product, where available, and in which subject matter will be searchable by topic, location, and year. The studies compiled and summarized here may inform planning and management actions that seek to reclaim landscapes across the western U.S. which have been affected by oil and gas development.

Open-File Report↗

Production of mineral commodities and geospatial map of the mineral industries and related infrastructure of China

As part of the U.S. Geological Survey’s (USGS) mission to distribute global mineral information and analyze supply chains, this study provides a comprehensive review of the global significance of China’s mineral production and capacity in 2023. Of 77 mineral commodities in the USGS dataset, China produced 74 and was the world’s first-ranked producer for 39 of the 74. Compared to the high share of global mineral production, including up to 98 percent of global gallium production, the country’s share of global mineral reserves was relatively small, ranging from 20 percent (zinc ore) to 52 percent (tungsten ore). China’s imports of metal ores, slag, and ash accounted for 64 percent of global imports of such commodities by value. The country’s exports of base metals and articles of base metal accounted for 17 percent of the global exports. To help nongeographic information system users assess the spatial distribution of mineral mines, processing facilities, and ports for trades in China, this study created a geospatial (also called “georeferenced”) portable document format (GeoPDF) map. In addition, the GeoPDF contains mineral resource tracts (such as antimony, copper, potash, coal, and oil and gas), exploration sites, and energy infrastructure based on the preexisting USGS data.

Open-File Report↗

Bituminous coal production in the Appalachian basin: past, present, and future

Although small quantities of coal first were produced from the Appalachian basin in the early 1700s, the first production statistics of significance were gathered during the census of 1830 (Eavenson, 1942). Since then, about 35 billion short tons of bituminous coal have been produced from the Appalachian basin from an original potential coal reserve (PCR (o) ) estimated to range from about 60 to 90 billion short tons. The term “reserve” refers to economically producible coal, and a “potential coal reserve” (PCR (n) ) is an estimate of the amount of coal economically recoverable in a region (State, coal field) over a defined time period (n = number of years) and under a range of economic, societal, and technological conditions. Thus, the current cumulative production plus the PCR (n) equals an estimated cumulative production (ECP (n) ). The maps in this report (oversized figures 1, 2, 3, and 4) were produced from a digital database of historical and current coal production records by county. Sources of the original data include various State geological surveys, the U.S. Geological Survey, the former U.S. Bureau of Mines, and the U.S. Department of Energy’s Energy Information Administration. This report is part of the U.S. Geological Survey’s National Coal Resource Assessment Project. The Appalachian basin consistently has lead all other regions of the country in coal production and, until 1970, produced 70 percent or more of the coal produced in the Nation (fig. 5). Since 1970, however, the relative amount of coal coming from the Appalachian basin has declined from about 70 percent to 43 percent. Historically, coal production from the Appalachian basin may be divided into three economically driven cycles: (1) from the inception of exploration and development of the resource through World War I (1914) to the Depression (1929 to the early 1940s); (2) from the Depression through World War II (1944) to the production decline in 1961; and (3) from 1961 through the current period of increasing demand for coal by the electric power industry (fig. 6). Annual coal production from the Appalachian basin peaked in 1997 at 476.8 million tons and has since declined to 375.3 million tons as of 2003. This report on Appalachian basin coal production consists of four plates and associated graphs and tables that were used to construct the maps. Figure 1 shows the decade of greatest coal production by county. Figure 2 shows the amount of coal produced for each county (in thousands of short tons) during the year of greatest coal production. These data are sorted by decade. Figure 3 illustrates the cumulative coal production (in thousands of short tons) for each county since about the beginning of the 20th century. Figure 4 shows 2003 production by county in thousands of short tons.

Appalachian basin↗

Hydrology of Salt Wells Creek — A plains stream in southwestern Wyoming

Development of energy minerals in plains areas of Wyoming is expanding rapidly. Such development may affect water resources and hydrologic relations of the plains; however, little information exists concerning hydrologic processes for these areas. This report summarizes results of a hydrologic study made during 1975-78 of Salt Wells creek, a drainage area of about 500 square miles located southeast of Rock Springs, Wyoming. The area is typical of arid and semiarid plains areas in southwestern Wyoming where mineral development is occurring. Salt Wells Creek is predominately an intermittent stream. Numerous springs in the headwaters cause small perennial flows in some upstream tributaries, but evaporation, freezeup, and seepage deplete these flows so that the middle and lower reaches of the main channel have only intermittent flows. The intermittent nature of streamflow affects water quality. It was observed that a flushing of dissolved solids and suspended sediment occurs during the first flows of a runoff event. A striking feature of the stream is its deeply incised channel. The downcutting is attributed to the cummulative effects of: (1) a change in the relative climate, amounts of annual precipitation occurring as rain and snow, (2) change in base level due to downstream channelization, and (3) changes in land use. Because of the incision, erosion is now expanding to include intervening tributaries.

Wyoming↗

Are the Columbia River Basalts, Columbia Plateau, Idaho, Oregon, and Washington, USA, a viable geothermal target? A preliminary analysis

The successful development of a geothermal electric power generation facility relies on (1) the identification of sufficiently high temperatures at an economically viable depth and (2) the existence of or potential to create and maintain a permeable zone (permeability >10 -14 m 2 ) of sufficient size to allow efficient long-term extraction of heat from the reservoir host rock. If both occur at depth under the Columbia Plateau, development of geothermal resources there has the potential to expand both the magnitude and spatial extent of geothermal energy production. However, a number of scientific and technical issues must be resolved in order to evaluate the likelihood that the Columbia River Basalts, or deeper geologic units under the Columbia Plateau, are viable geothermal targets. Recent research has demonstrated that heat flow beneath the Columbia Plateau Regional Aquifer System may be higher than previously measured in relatively shallow (<600 m depth) wells, indicating that sufficient temperatures for electricity generation occur at depths 5 km. The remaining consideration is evaluating the likelihood that naturally high permeability exists, or that it is possible to replicate the high average permeability (approximately 10 -14 to 10 -12 m 2 ) characteristic of natural hydrothermal reservoirs. From a hydraulic perspective, Columbia River Basalts are typically divided into dense, impermeable flow interiors and interflow zones comprising the top of one flow, the bottom of the overlying flow, and any sedimentary interbed. Interflow zones are highly variable in texture but, at depths <600 m, some of them form highly permeable regional aquifers with connectivity over many tens of kilometers. Below depths of ~600 m, permeability reduction occurs in many interflow zones, caused by the formation of low-temperature hydrothermal alteration minerals (corresponding to temperatures above ~35 °C). However, some high permeability (>10-14 m 2 ) interflows are documented at depths up to ~1,400 m. If the elevated permeability in these zones persists to greater depths, they may provide natural permeability of sufficient magnitude to allow their exploitation as conventional geothermal reservoirs. Alternatively, if the permeability in these interflow zones is less than 10-14 m 2 at depth, it may be possible to use hydraulic and thermal stimulation to enhance the permeability of both the interflow zones and the natural jointing within the low-permeability interior portions of individual basalt flows in order to develop Enhanced/Engineered Geothermal System (EGS) reservoirs. The key challenge for an improved Columbia Plateau geothermal assessment is acquiring and interpreting comprehensive field data that can provide quantitative constraints on the recovery of heat from the Columbia River Basalts at depths greater than those currently tested by deep boreholes.

Idaho, Oregon, Washington↗

Fall Chinook salmon (Oncorhynchus tshawytscha), sand roller (Percopsis transmontana), and smallmouth bass (Micropterus dolomieu) interactions in a Snake River reservoir: A tale of three species

We studied some of the relationships between federally listed fall Chinook Salmon, Oncorhynchus tshawytscha , endemic Sand Roller, Percopsis transmontana , and non-native Smallmouth Bass, Micropterus dolomieu , in Lower Granite Reservoir on the Snake River. Because of its recent reappearance and population increase, the Sand Rollers could be filling the role of a “native invader” in the reservoir food web. We speculated that Sand Rollers could either negatively affect fall Chinook Salmon by potentially competing with them for resources in shoreline habitats or, alternatively, benefit the salmon by providing a buffer against Smallmouth Bass predation. Nighttime beach seining showed that habitat use by fall Chinook Salmon and Sand Rollers overlapped completely in spring when both species were present along shorelines. Diet data from stomach samples also showed high overlap, but data on stable isotopes of 13 C and 15 N suggested that each species could be obtaining much of their dietary energy from different reservoir locations. Although habitat and diet overlap are evidence of competition, diel and spatial partitioning of resource use between fall Chinook Salmon and Sand Rollers may act to reduce potential competition. Analyses of Smallmouth Bass diets showed that fall Chinook Salmon and Sand Rollers comprised the majority of prey fish consumed by bass. Across years, as Smallmouth Bass increased their consumption of Sand Rollers (range 0.219 to 0.392 fish smallmouth -1 day -1 ), they decreased their consumption of fall Chinook Salmon (range 0.114 to 0.050 fish smallmouth -1 day -1 ). The greatest effect Sand Rollers may have on fall Chinook Salmon in Lower Granite Reservoir is to serve as a buffer against Smallmouth Bass predation.

Idaho, Washington↗

Shifts in the trophic base of intermittent stream food webs

Understanding spatial and temporal variation in the trophic base of stream food webs is critical for predicting population and community stability, and ecosystem function. We used stable isotope ratios ( 13 C/ 12 C, and 15 N/ 14 N) to characterize the trophic base of two streams in the Ozark Mountains of northwest Arkansas, U.S.A. We predicted that autochthonous resources would be more important during the spring and summer and allochthonous resources would be more important in the winter due to increased detritus inputs from the riparian zone during autumn leaf drop. We predicted that stream communities would demonstrate increased reliance on autochthonous resources at sites with larger watersheds and greater canopy openness. The study was conducted at three low-order sites in the Mulberry River Drainage (watershed area range: 81-232 km 2 ) seasonally in 2006 and 2007. We used circular statistics to examine community-wide shifts in isotope space among fish and invertebrate consumers in relation to basal resources, including detritus and periphyton. Mixing models were used to quantify the relative contribution of autochthonous and allochthonous energy sources to individual invertebrate consumers. Significant isotopic shifts occurred but results varied by season and site indicating substantial variation in the trophic base of stream food webs. In terms of temporal variation, consumers shifted toward periphyton in the summer during periods of low discharge, but results varied during the interval between summer and winter. Our results did not demonstrate increased reliance on periphyton with increasing watershed area or canopy openness, and detritus was important at all the sites. In our study, riffle-pool geomorphology likely disrupted the expected spatial pattern and stream drying likely impacted the availability and distribution of basal resources.

Hydrobiologia↗

Second Projet de Renforcement Institutionnel du Secteur Minier de la République Islamique de Mauritanie (PRISM-II) Phase V

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗

Geologic map of Mauritania (phase V, deliverables 51a, 51b, and 51c)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗

Crystalline basement map of Mauritania derived from filtered aeromagnetic data (deliverable 54_1), Aeromagnetic and geological structure map of Mauritania (phase V, deliverable 54_2), Maximum depth to basement map of Mauritania derived from Euler analysis of Aeromagnetic data (phase V, deliverable 54_3), and color composite image of radioelement data (added value)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗

Permissive tracts for nickel, copper, platinum group elements (PGE), and chromium deposits of Mauritania (phase V, deliverable 66): Chapter G1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗

Mineral potential tracts for orogenic, Carlin-like, and epithermal gold deposits in the Islamic Republic of Mauritania, (phase V, deliverable 68): Chapter H1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗

Permissive tracts for orogenic and epithermal gold deposits in Mauritania (phase V, deliverable 70): Chapter I1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗