Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Geological Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS2012

Photogrammetric portrayal of Mars topography

Special photogrammetric techniques have been developed to portray Mars topography, using Mariner and Viking imaging and nonimaging topographic information and earth-based radar data. Topography is represented by the compilation of maps at three scales: global, intermediate, and very large scale. The global map is a synthesis of topographic information obtained from Mariner 9 and earth-based radar, compiled at a scale of 1:25,000,000 with a contour interval of 1 km; it gives a broad quantitative view of the planet. At intermediate scales, Viking Orbiter photographs of various resolutions are used to compile detailed contour maps of a broad spectrum of prominent geologic features; a contour interval as small as 20 m has been obtained from very high resolution orbital photography. Imagery from the Viking lander facsimile cameras permits construction of detailed, very large scale (1:10) topographic maps of the terrain surrounding the two landers; these maps have a contour interval of 1 cm. This paper presents several new detailed topographic maps of Mars.

Journal of Geophysical Research Solid Earth↗
USGS2024

Mitigating climate change by abating coal mine methane: A critical review of status and opportunities

Methane has a short atmospheric lifetime compared to carbon dioxide (CO 2 ), ∼decade versus ∼centuries, but it has a much higher global warming potential (GWP), highlighting how reducing methane emissions can slow the rate of climate change. When considering the contribution of greenhouse gas (GHG) emissions to current global warming (2010–2019) relative to the industrial revolution (1850–1900) levels, methane contributes 0.5 °C or ∼ a third of the total. The most recent post-2023 global estimates of methane emissions by bottom-up (BU) and top-down (TD) approaches for the coal mining sector are in the range of ∼41 ± 3 Tg yr −1 and 33 ± 5 Tg yr −1 , respectively. This divergence, notwithstanding overlapping confidence intervals, is a result of differences between applied TD global inversion models and BU emission inventories. Further research can help to better refine emissions from the various contributing coal mine methane (CMM) emissions sources. The coal mining sector accounts for over 10 % of global anthropogenic methane emissions. The contribution of CMM emissions to the global budget have increased since 2000, although upward and downward regional trends have been observed.

International Journal of Coal Geology↗
USGS1998

A model that helps explain Sr-isotope disequilibrium between feldspar phenocrysts and melt in large-volume silicic magma systems

Feldspar phenocrysts of silicic volcanic rocks are commonly in Sr-isotopic disequilibrium with groundmass. In some cases the feldspar is more radiogenic, and in others it is less radiogenic. Several explanations have been published previously, but none of these is able to accommodate both senses of disequilibrium. We present a model by which either more- or less-radiogenic feldspar (or even both within a single eruptive unit) can originate. The model requires a magma body open to interaction with biotite- and feldspar-bearing wall rock. Magma is incrementally contaminated as wall rock melts incongruently. Biotite preferentially melts first, followed by feldspar. Such melting behavior, which is supported by both field and experimental studies, first contaminates magma with a relatively radiogenic addition, followed by a less-radiogenic addition. Feldspar phenocrysts lag behind melt (groundmass of volcanic rock) in incorporating the influx of contaminant, thus resulting in Sr-isotopic disequilibrium between the crystals and melt. The sense of disequilibrium recorded in a volcanic rock depends on when eruption quenches the contamination process. This model is testable by isotopic fingerprinting of individual feldspar crystals. For a given set of geologic boundary conditions, specific core-to-rim Sr-isotopic profiles are expectable. Moreover, phenocrysts that nucleate at different times during the contamination process should record different and predictable parts of the history. Initial results of Sr-isotopic fingerprinting of sanidine phenocrysts from the Taylor Creek Rhyolite are consistent with the model. More tests of the model are desirable.Feldspar phenocrysts of silicic volcanic rocks are commonly in Sr-isotopic disequilibrium with groundmass. In some cases the feldspar is more radiogenic, and in others it is less radiogenic. Several explanations have been published previously, but none of these is able to accommodate both senses of disequilibrium. We present a model by which either more- or less-radiogenic feldspar (or even both within a single eruptive unit) can originate. The model requires a magma body open to interaction with biotite- and feldspar-bearing wall rock. Magma is incrementally contaminated as wall rock melts incongruently. Biotite preferentially melts first, followed by feldspar. Such melting behavior, which is supported by both field and experimental studies, first contaminates magma with a relatively radiogenic addition, followed by a less-radiogenic addition. Feldspar phenocrysts lag behind melt (groundmass of volcanic rock) in incorporating the influx of contaminant, thus resulting in Sr-isotopic disequilibrium between the crystals and melt. The sense of disequilibrium recorded in a volcanic rock depends on when eruption quenches the contamination process. This model is testable by isotopic fingerprinting of individual feldspar crystals. For a given set of geologic boundary conditions, specific core-to-rim Sr-isotopic profiles are expectable. Moreover, phenocrysts that nucleate at different times during the contamination process should record different and predictable parts of the history. Initial results of Sr-isotopic fingerprinting of sanidine phenocrysts from the Taylor Creek Rhyolite are consistent with the model. More tests of the model are desirable.

Journal of Volcanology and Geothermal Research↗
USGS2004

Late Holocene lake-level variation in southeastern Lake Superior: Tahquamenon Bay, Michigan

Internal architecture and ages of 71 beach ridges in the Tahquamenon Bay embayment along the southeastern shore of Lake Superior on the Upper Peninsula of Michigan were studied to generate a late Holocene relative lake-level curve. Establishing a long-term framework is important to examine the context of historic events and help predict potential future changes critical for effective water resource management. Ridges in the embayment formed between about 4,200 and 2,100 calendar years before 1950 (cal. yrs. B.P.) and were created and preserved every 28 ± 4.8 years on average. Groups of three to six beach ridges coupled with inflections in the lake-level curve indicate a history of lake levels fluctuations and outlet changes. A rapid lake-level drop (approximately 4 m) from about 4,100 to 3,800 cal. yrs. B.P. was associated with a fall from the Nipissing II high-water-level phase. A change from a gradual fall to a slight rise was associated with an outlet change from Port Huron, Michigan/Sarnia, Ontario to Sault Ste. Marie, Michigan/Ontario. A complete outlet change occurred after the Algoma high-water-level phase (ca. 2,400 cal. yrs. B.P.). Preliminary rates of vertical ground movement calculated from the strandplain are much greater than rates calculated from historical and geologic data. High rates of vertical ground movement could have caused tectonism in the Whitefish Bay area, modifying the strandplain during the past 2,400 years. A tectonic event at or near the Sault outlet also may have been a factor in the outlet change from Port Huron/Sarnia to Sault Ste. Marie.

Michigan↗
USGS2012

Reflections from midcrustal rocks within the Mesozoic subduction complex near the eastern Aleutian Trench

Seismic reflection data collected in 1973 by Western Geophysical Company show that highly reflective rocks make up the midcrust of the convergent margin adjacent to the eastern Aleutian Trench. These rocks form an arch that strikes obliquely across the strongly expressed northeast-southwest structural grain of exposed Mesozoic rocks. In an earlier report we proposed that the deep events mark the location of either the presently subducting plate or the top of underplated rocks. However, the short radius of curvature of this arch precludes the possibility that the deep events indicate the igneous oceanic crust. Instead, the deep reflections could be from underplated rocks that have been arched by the imbrication or underplating of strata below the reflective rocks. High-amplitude water layer and interbed multiples prevent precise connection of shallow and deep geology. For example, the Border Ranges fault, a suture between major tectonostratigraphic terranes, is not revealed on any of our seismic sections. We speculate, however, that one band of reflections that rises toward but does not reach the surface is from the Eagle River thrust fault, which separates Late Cretaceous melange from deformed turbidite sequences of the same age.

Journal of Geophysical Research Solid Earth↗
USGS2012

A magmatic model of Medicine Lake Volcano, California

Medicine Lake volcano is a Pleistocene and Holocene shield volcano of the southern Cascade Range. It is located behind the main Cascade arc in an extensional tectonic setting where high-alumina basalt is the most commonly erupted lava. This basalt is parental to the higher-silica calc-alkaline and tholeiitic lavas that make up the bulk of the shield. The presence of late Holocene, chemically identical rhyolites on opposite sides of the volcano led to hypotheses of a large shallow silicic magma chamber and of a small, deep chamber that fed rhyolites to the surface via cone sheets. Subsequent geophysical work has been unable to identify a large silicic magma body, and instead a small one has apparently been recognized. Some geologic data support the geophysical results. Tectonic control of vent alignments and the dominance of mafic eruptions both in number of events and volume throughout the history of the volcano indicate that no large silicic magma reservoir exists. Instead, a model is proposed that includes numerous dikes, sills, and small magma bodies, most of which are too small to be recognized by present geophysical methods.

Journal of Geophysical Research Solid Earth↗
USGS1989

Investigations of SPOT cartographic applications in the U.S. Geological Survey

The US Geological Survey has a longstanding commitment to the advancement of the technology and applications of remotely sensed data from civilian satellite systems. In the past, research based on satellite data was primarily directed toward natural resource and land use applications rather than cartographic applications. The availability of high-resolution, steroscopic data from the sensors on SPOT provides new opportunities for cartographic applications. The potential applications include production of satellite image and topographic maps, and generation of digital elevation data.

CISM Journal ACSGC↗
USGS2006

Minerals and mineral relationship of the clay minerals

The invitation to be the Edward Orton, Jr., Fellow Lecturer of the American Ceramic Society for 1945 is a very great honor and a privilege which one interested in the mineralogy of clays must heartily appreciate. Dr. Orton was a geologist as well as a founder of this Society, and no doubt in issuing this invitation you had in mind the maintenance of this historic relationship. Those of us who follow him cannot add to that relationship, but I hope that I can help to foster it. Perhaps not all geologists know of this common ground between ceramics and geology as you do, and no doubt you would have me remind my geologic colleagues of this and of the mutual contributions which its maintenance entails. Another common bond of interest is that ceramists have made use of mineralogic and petrographic techniques to an extent not matched in any other applied science. In particular, they have utilized the petrographic microscope, and ceramists and mineralogists alike have found in X rays a wonderful new method of research. Clays, the subject of this lecture, should provide a common meeting ground and one which no doubt would win the hearty approval of Dr. Orton.

Journal of the American Ceramic Society↗
USGS2007

The landsat image mosaic of the Antarctica Web Portal

People believe what they can see. The Poles exist as a frozen dream to most people. The International Polar Year wants to break the ice (so to speak), open up the Poles to the general public, support current polar research, and encourage new research projects. The IPY officially begins in March, 2007. As part of this effort, the U.S. Geological Survey (USGS) and the British Antarctic Survey (BAS), with funding from the National Science Foundation (NSF), are developing three Landsat mosaics of Antarctica and an Antarctic Web Portal with a Community site and an online map viewer. When scientists are able to view the entire scope of polar research, they will be better able to collaborate and locate the resources they need. When the general public more readily sees what is happening in the polar environments, they will understand how changes to the polar areas affect everyone.

Data Science Journal↗
USGS2000

New 40Ar/39Ar age of the Bishop Tuff from multiple sites and sediment rate calibration for the Matuyama-Brunhes boundary

Precise dating of sanidine from proximal ash flow Bishop Tuff and air fall Bishop pumice and ash, California, can be used to derive an absolute age of the Matuyama Reversed-Brunhes Normal (M-B) paleomagnetic transition, identified stratigraphically close beneath the Bishop Tuff and ash at many sites in the western United States. An average age of 758.9±1.8 ka, standard error of the mean (SEM), was obtained for individual sanidine crystals or groups of several crystals, determined from ∼70 individual analyses of sanidine separates from 11 sample groups obtained at five localities. The basal air fall pumice (757.7±1.8 ka) and overlying ash flow tuff (762.2±4.7 ka) from near the source yield essentially the same dates within errors of analysis, suggesting that the two units were emplaced close in time. A date on distal Bishop air fall ash bed at Priant, California, ∼100 km to the west of the source area, is younger, 750.1±4.3 ka, but not significantly different within analytical error (±1 standard deviation). Previous dates of the Bishop Tuff, obtained by others using conventional K-Ar and the fission track method on zircons, ranged from ∼650 ka to ∼1.0 Ma. The most recent, generally accepted date by the K-Ar method on sanidine was 738±3 ka. We infer, as others before, that many K-Ar dates on sanidine feldspar are too young owing to incomplete degassing of radiogenic Ar during fusion in the K-Ar technique and that many older K-Ar dates are too old owing to detrital or xenocrystic contamination in the larger samples that are necessary for the technique. The new dates are similar to recent 40Ar/39Ar ages of the Bishop Tuff determined on individual samples by others but are derived from a larger proximal sample population and from multiple analysis of each sample. The results provide a definitive and precise age calibration of this widespread chronostratigraphic marker in the western United States and northeastern Pacific Ocean. We calculated the age of the M-B transition at five sites, assuming constant sedimentation rates, the age of the Bishop ash bed and one or more well-dated chronostratigraphic horizons above and below the Bishop Tuff ash bed and M-B transition, and stratigraphic separations between these datum levels. The age of the M-B transition is 774.2±2.8 ka, based on the average of eight such calculations, close to other recent determinations, and similar to that determined from the astronomically tuned polarity timescale. Our approach provides an alternative and surprisingly precise method for determining the age of the M-B and other chronostratigraphic levels. The above dates, calculated using U.S. Geological Survey values of 27.92 Ma for the Taylor Creek (TC) sanidine can be recalculated to other widely used values for these monitors. For example, using recently published values of 28.34 Ma (TC) and 523.1 Ma (McLure Mountain hornblende, MMhb-1), the resulting ages are ∼774 ka for the Bishop Tuff and ash bed and ∼789 ka for the M-B transition.

California↗
USGS2005

Generation and verification of theoretical rating curves in the Whitewater River basin, Kansas

[1] A new method for generating stage-discharge relations (rating curves) for geomorphically stable channels is presented and applied to two streams in the Whitewater River basin, Kansas. The approach converts measurements of stage into discharge using a fluid mechanically based model. The model does not use empirical roughness coefficients, such as Manning coefficients, but rather determines channel roughness from field measurements of the (1) channel geometry, (2) the physical roughness of the bed, banks, and floodplain, and (3) the vegetation density on the banks and floodplain. These measurements are used to calculate explicitly the drag on the small-scale topographic features on the boundary, the drag on the stems and branches of woody vegetation, and the friction on the bed, banks, and floodplain. The theoretical rating curves produced by the model for two study reaches, which are near U.S. Geological Survey (USGS) streamflow-gauging stations, are in good agreement with direct measurements of discharge made by the USGS. Our method has the potential of providing accurate estimates of stream flows less expensively than conventional gauging methods. In addition, the method can be used to obtain more accurate discharge estimates than conventional indirect methods for determining discharge, which are based on estimates of Manning's coefficient.

Journal of Geophysical Research F: Earth Surface↗
USGS2012

Review and update of the applications of organic petrology: Part 1, geological applications

Organic petrology developed as coal petrology at the beginning of the 20th century dedicated mainly to the study of coals because of their utilization in industry. Coal petrology was then considered a branch of coal science. Later, with the development of specialized nomenclature, classification of coal components, and the standardization and improvement of analytical (microscopical) methods, this discipline expanded in interests and name, becoming organic petrology. Organic petrology carries a broader context, being as well a tool applied in the study of dispersed organic matter in sedimentary rocks due to its importance in exploration for fossil fuel resources. At present, organic petrology is a discipline widely recognized for its role in fundamental and applied research with respect to both coal utilization and in geosciences. Throughout the 20th century several important monographs have been published on the discipline of organic petrology, including “Stach's textbook of coal petrology” (1st edition 1935, 2nd 1975, 3rd 1982), updated as the more general “Organic petrology” by Taylor et al. (1998). More recently, the text “Applied coal petrology: the role of petrology in coal utilization” was published by Suárez-Ruiz and Crelling (2008). This review is the first in a two-part review series that describes and updates the role of organic petrology in geosciences. A second part complementing this one and focused on the applications of organic petrology to other scientific fields will follow.

International Journal of Coal Geology↗
USGS2001

Primary centers and secondary concentrations of tectonic activity through time in the western hemisphere of Mars

Five main stages of radial and concentric structures formed around Tharsis from the Noachian through the Amazonian as determined by geologic mapping of 24,452 structures within the stratigraphic framework of Mars and by testing their radial and concentric orientations. Tectonic activity peaked in the Noachian (stage 1) around the largest center, Claritas, an elongate center extending more than 20° in latitude and defined by about half of the total grabens which are concentrated in the Syria Planum, Thaumasia, and Tempe Terra regions. During the Late Noachian and Early Hesperian (stage 2), extensional structures formed along the length of present-day Valles Marineris and in Thaumasia (with a secondary concentration near Warrego Vallis) radial to a region just to the south of the central margin of Valles Marineris. Early Hesperian (stage 3) radial grabens in Pavonis, Syria, Ulysses, and Tempe Terra and somewhat concentric wrinkle ridges in Lunae and Solis Plana and in Thaumasia, Sirenum, Memnonia, and Amazonis are centered northwest of Syria with secondary centers at Thaumasia, Tempe Terra, Ulysses Fossae, and western Valles Marineris. Late Hesperian/Early Amazonian (stage 4) structures around Alba Patera, the northeast trending alignment of Tharsis Montes, and Olympus Mons appears centered on Alba Patera. Stage 5 structures (Middle-Late Amazonian) represent the last pulse of Tharsis-related activity and are found around the large shield volcanoes and are centered near Pavonis Mons. Tectonic activity around Tharsis began in the Noachian and generally decreased through geologic time to the Amazonian. Statistically significant radial distributions of structures formed during each stage, centered at different locations within the higher elevations of Tharsis. Secondary centers of radial structures during many of the stages appear related to previously identified local magmatic centers that formed at different times and locations throughout Tharsis.

Journal of Geophysical Research E: Planets↗
USGS2006

Spirit rover localization and topographic mapping at the landing site of Gusev crater, Mars

By sol 440, the Spirit rover has traversed a distance of 3.76 km (actual distance traveled instead of odometry). Localization of the lander and the rover along the traverse has been successfully performed at the Gusev crater landing site. We localized the lander in the Gusev crater using two-way Doppler radio positioning and cartographic triangulations through landmarks visible in both orbital and ground images. Additional high-resolution orbital images were used to verify the determined lander position. Visual odometry and bundle adjustment technologies were applied to compensate for wheel slippage, azimuthal angle drift, and other navigation errors (which were as large as 10.5% in the Husband Hill area). We generated topographic products, including 72 ortho maps and three-dimensional (3-D) digital terrain models, 11 horizontal and vertical traverse profiles, and one 3-D crater model (up to sol 440). Also discussed in this paper are uses of the data for science operations planning, geological traverse surveys, surveys of wind-related features, and other science applications.

Journal of Geophysical Research E: Planets↗
USGS2006

Rocks of the Columbia Hills

The Mars Exploration Rover Spirit has identified five distinct rock types in the Columbia Hills of Gusev crater. Clovis Class rock is a poorly sorted clastic rock that has undergone substantial aqueous alteration. We interpret it to be aqueously altered ejecta deposits formed by impacts into basaltic materials. Wishstone Class rock is also a poorly sorted clastic rock that has a distinctive chemical composition that is high in Ti and P and low in Cr. Wishstone Class rock may be pyroclastic or impact in origin. Peace Class rock is a sedimentary material composed of ultramafic sand grains cemented by significant quantities of Mg- and Ca-sulfates. Peace Class rock may have formed when water briefly saturated the ultramafic sands and evaporated to allow precipitation of the sulfates. Watchtower Class rocks are similar chemically to Wishstone Class rocks and have undergone widely varying degrees of near-isochemical aqueous alteration. They may also be ejecta deposits, formed by impacts into Wishstone-rich materials and altered by small amounts of water. Backstay Class rocks are basalt/trachybasalt lavas that were emplaced in the Columbia Hills after the other rock classes were, either as impact ejecta or by localized volcanic activity. The geologic record preserved in the rocks of the Columbia Hills reveals a period very early in Martian history in which volcanic materials were widespread, impact was a dominant process, and water was commonly present.

Journal of Geophysical Research E: Planets↗
USGS2014

Past, present, and future of water data delivery from the U.S. Geological Survey

We present an overview of national water databases managed by the U.S. Geological Survey, including surface-water, groundwater, water-quality, and water-use data. These are readily accessible to users through web interfaces and data services. Multiple perspectives of data are provided, including search and retrieval of real-time data and historical data, on-demand current conditions and alert services, data compilations, spatial representations, analytical products, and availability of data across multiple agencies.

Journal of Contemporary Water Research and Educati↗
USGS1991

Publications of the Branch of Atlantic Marine Geology for Calendar Year 1990

This U.S. Geological Survey Open-File Report [extract] contains a listing of publications authored or co-authored by members of the Branch of Atlantic Marine Geology and published in calendar year 1990. The Branch conducts a broad geologic and geophysical research and mapping program, primarily along the U.S. Atlantic Margin, in the Great Lakes, the Gulf of Mexico, the Caribbean and polar regions. A long range objective of this program is to develop a comprehensive understanding of the geology of the continental margin and a predictive capability to guide and assess the consequences of its use. Headquarters of the Branch of Atlantic Marine Geology are located in Woods Hole, MA., and personnel are located in Woods Hole, MA., St Petersburg, FL., Reston, VA., Denver, CO., and San Juan, Puerto Rico. A brochure describing the Branch of Atlantic Marine Geology may be obtained by writing to Chief, Branch of Atlantic Marine Geology, Quissett Campus, Woods Hole, MA 02543. Results of Branch investigations are distributed in a variety of ways, including maps, journal articles, abstracts and U.S.G.S. publications. Copies of U.S.G.S. Open File Reports may be obtained from the author. Book publications can be obtained from U.S. Geological Survey, Books and Reports Sales, Federal Center, Box 25425, Denver, CO 80225. Copies of U.S.G.S. Maps may be obtained from the U.S. Geological Survey, Map Sales, Federal Center, Box 25286, Denver, CO 80225.

Open-File Report↗
USGS1993

Publications of the Branch of Atlantic Marine Geology for Calendar Year 1992

This U.S. Geological Survey Open-File Report contains a listing of publications authored or co-authored by members of the Branch of Atlantic Marine Geology and published in calendar year 1992. The Branch conducts a broad geologic and geophysical research and mapping program, primarily along the U.S. Atlantic Margin, in the Great Lakes, the Gulf of Mexico, the Caribbean and polar regions. A long range objective of this program is to develop a comprehensive understanding of the geology of the continental margin and a predictive capability to guide and assess the consequences of its use. Headquarters of the Branch of Atlantic Marine Geology are located in Woods Hole, MA., and personnel are located in Woods Hole, MA., St Petersburg, FL., Reston, VA., Denver, CO., and San Juan, Puerto Rico. A brochure describing the Branch of Atlantic Marine Geology may be obtained by writing to Chief, Branch of Atlantic Marine Geology, Quissett Campus, Woods Hole, MA 02543. Results of Branch investigations are distributed in a variety of ways, including maps, journal articles, abstracts and U.S.G.S. publications. Copies of U.S.G.S. Open File Reports may be obtained from the author. Book publications can be obtained from U.S. Geological Survey, Books and Reports Sales, Federal Center, Box 25425, Denver, CO 80225. Copies of U.S.G.S. Maps may be obtained from the U.S. Geological Survey, Map Sales, Federal Center, Box 25286, Denver, CO 80225.

Open-File Report↗