Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Modeling and Software”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,663 records · Page 43Linked to original sources
USGS2025

Estimation of the accessible and useful resource base for electric-grade enhanced geothermal systems (EGS) resources of the Great Basin, USA

Scientists with the U.S. Geological Survey (USGS) recently completed a provisional assessment of the electric-grade geothermal resources associated with the low-permeability geologic formations of the Great Basin, USA, where resources are assumed to be accessible using enhanced geothermal systems (EGS) technologies (i.e., the engineering of sufficient permeability to facilitate efficient heat extraction). This assessment required estimation of the accessible resource base (electric-grade heat [>90ºC] at depths where drilling and stimulation are deemed achievable using current technology) and useful resource (heat that can be extracted from the accessible region). Electric-grade heat can be estimated from existing temperature models. The accessible resource base can be estimated as the electric-grade heat that exists at depths shallower than 6 km based on the limitations of current drilling and stimulation technologies, along with evidence for sustained natural fracture conductivity at depth. The useful part of the accessible heat can be estimated as the product of three efficiencies and factors: the heat extraction efficiency, the viable geology factor, and the reservoir spacing efficiency. The accessible and useful parts of the resource can be estimated in units of heat, or in units of electric power using an electrical conversion efficiency, which is a function of resource temperature. We also estimate the ranges for each of the efficiencies and describe the motivations behind the choice of best estimates used for the recent assessment. An analytic solution is provided for the useful resource above any depth (in units of electric power), where efficiency estimation assumes nearly steady heat extraction rates that cool reservoirs to 90ºC over 30 years of power generation.

Great Basin↗
USGS2024

Peri-Gondwanan sediment in the Arkoma Basin derived from the north: The detrital zircon record of a uniquely concentrated non-Laurentian source signal in the late Paleozoic

During the assembly of Pangea, peri-Gondwanan terranes collided with the eastern and southern margins of Laurentia and brought with them unique detrital zircon U-Pb signatures. Discriminating between individual peri-Gondwanan terranes in the detrital record is difficult due to their similar geologic histories. However, characterization of this provenance is critical for understanding late Paleozoic sediment routing during development of Pangea. Along southeastern Laurentia, in the Arkoma Basin (present-day Arkansas and eastern Oklahoma, southeastern United States), we identified Middle Pennsylvanian (Desmoinesian) strata that exhibit a concentrated peri-Gondwanan detrital zircon signature (e.g., ca. 800–550 Ma). Although several southern peri-Gondwanan terranes (e.g., Maya, Suwannee) are closer to the Arkoma Basin, geologic data, such as predominantly north-to-south paleocurrents and proximal-to-distal facies relationships in these Desmoinesian strata, support a northern source (e.g., Ganderia, Avalonia, Meguma). Further evidence of a northern source comes from detrital zircon source mapping, which reveals the persistence of this peri-Gondwanan signal in depocenters to the north of the basin after the signal had diminished in the Arkoma Basin. To this end, bottom-up detrital zircon source modeling, source mapping, regional stratigraphy, paleocurrent data, and sandstone petrography allow us to reconstruct the evolution of this Middle Pennsylvanian (Desmoinesian) sediment pathway in the context of intraplate and plate-margin tectonic activity. This reconstruction documents processes affecting Earth’s surface (e.g., tectonics, climate) during the assembly of Pangea and describes in detail part of a dynamic continental-scale drainage system.

Geosphere↗
USGS2024

Site response in the Walnut Creek–Concord region of the San Francisco Bay, California: Ground motion amplification in a fault-bounded basin

Thirty‐seven portable accelerometers were deployed in the eastern San Francisco Bay communities of Walnut Creek and Concord to study site response in a fault‐bounded, urban, sedimentary basin. Local earthquakes were recorded for a period of two years from 2017 to 2019 resulting in 101 well‐recorded events. Site response is estimated by two methods: the reference site spectral ratio method and a source‐site spectral inversion method. The reference site spectral ratio method allows investigation of the variability of site amplification with source azimuth and frequency. The source‐site spectral inversion method yields the best least‐squares fit to site response for a database of ground‐motion records. Both methods show substantial amplification in the Walnut Creek–Concord basin below 2 Hz indicating strong surface‐wave development. Greater amplification is seen for sources aligned along the long axis of the basin. Inversion using close‐in sources at short distances yields lower amplification at longer periods than the entire data set due to reduced surface‐wave generation for steeper angles of incidence. Inversion of site response spectra for shallow shear‐wave velocity using a global search algorithm yields V S30 values consistent with generalized mapping results based on geology and topography but with greater variability due to local site variations. 3D finite‐element modeling shows greater amplification in the Walnut Creek–Concord basin with a basin‐edge effect likely contributing to higher ground motions. Topography is also seen to lead to increased scattering and shadowing effects.

California↗
USGS2025

Beyond optimality: Dryland ecosystems infrequently use water efficiently for carbon gain

Optimality theory assumes plants maximize carbon gain per unit water lost and is often implemented to scale leaf-level carbon gain and water use to regional and global scales. Optimality theory is often mathematically represented by assuming plant water-use efficiency (WUE) scales with VPD k , where k = ½ represents expected optimal behavior. It is unclear, however, if this relationship holds in arid and semi-arid ecosystems that are strongly impacted by soil and atmospheric moisture status. We used data from seven flux tower sites along an aridity gradient in New Mexico to answer: how does the relationship between WUE and VPD compare to expectations based on optimality theory? To address this question, we integrated the Dynamic Evapotranspiration Partitioning Approach for Rapid Timescales with a stochastic antecedent model to estimate ecosystem-level WUE (GPP/T) and the net sensitivity of WUE to VPD, or k Dynamic , which we compare to the theoretical optimal sensitivity of k = ½. Our results show that optimality theory is not always appropriate, and k Dynamic often deviates from ½, especially at some of the more arid sites or during periods of low soil moisture. At less arid, higher elevation sites, k Dynamic is most consistent with optimality theory at moderate VPD levels, but not at high VPD. In general, the sensitivity of WUE to VPD is highly variable such that k Dynamic exhibits notable daily and seasonal variability, suggesting highly dynamic stomatal behavior. These results emphasize that representing plant water-use strategies as dynamic in time and space is critical to improving large-scale estimates of plant water use.

New Mexico↗
USGS2025

Structural controls on splay fault rupture dynamics during Cascadia megathrust earthquakes

Great subduction earthquakes ( M w ≥ 8.0) can generate devastating tsunamis by rapidly displacing the seafloor and overlying water column. These potentially tsunamigenic seafloor offsets result from coseismic fault slip and deformation beneath or within the accretionary wedge. The mechanics of these shallow rupture phenomena and their dependence on subduction zone properties remain unresolved, partly due to the sparsity of offshore observations of shallow megathrust earthquake deformation. Here, we analyze how offshore structure influences shallow rupture mechanics and slip partitioning using 3D dynamic earthquake simulations of the Cascadia subduction zone (CSZ) megathrust with and without variably dipping seaward- or landward-vergent splay faults in the wedge that sole into the megathrust. Resulting tradeoffs between splay and megathrust slip reveal structural controls on rupture partitioning, with greater splay slip leading to less shallow megathrust slip updip. Gently dipping and seaward-vergent splays host more slip than those with steeper, landward-vergent splays. To isolate the underlying mechanisms, we compare models with Andersonian and plunging principal stresses. Results suggest distinct static and dynamic processes control the dip- and vergence-dependence of splay rupture: static (mis)alignment relative to far-field tectonic loading favors slip on more optimally oriented, shallowly dipping splay faults. In contrast, dynamic stress interactions of an updip-propagating megathrust rupture front with the free surface and potential branch faults favor forward branching onto seaward-vergent splays and inhibit backward branching onto landward-vergent splays. Resulting seafloor displacements suggest splay fault structure may influence coseismic tsunami source processes, highlighting the importance of dynamically viable rupture scenarios in subduction hazard assessments.

Cascadia subduction zone↗
USGS2026

Quantifying methane emissions from a rich fen with uncrewed aircraft systems in boreal Alaska

Thawing of permafrost in northern latitudes is accelerating, potentially releasing substantial amounts of methane (CH 4 ) as forested permafrost plateaus transition into wetlands. This ecosystem shift alters the carbon exchange between the soil and atmosphere, influencing the permafrost-carbon feedback. Monitoring these changes may require measurement platforms operating across varied spatial and temporal scales. Recent advancements in small uncrewed aircraft systems (sUAS) enable high resolution CH 4 flux quantification in remote, complex terrains; however, comparisons with established methods such as eddy covariance flux towers remain limited. We used a hexacopter sUAS to quantify CH 4 emissions from the Alaska Peatland Experiment, a wetland within the Bonanza Creek Experimental Forest. Using an ensemble of methods to define the background CH 4 concentration, along with near surface emissions from soil chambers, helped constrain our flux estimates. The sUAS method yielded an average flux of 0.0077 ± 0.0019 mol s −1 CH 4 , within a factor of two concurrent tower-derived total source flux estimates (0.0036 ± 0.00042 mol s −1 CH 4 ). To assess spatial drivers of observed fluxes, we conducted a 2D footprint analysis and overlaid the results with high-resolution hyperspectral land cover classification, quantifying vegetative contributions within each footprint. This revealed higher fen representation in sUAS measurements (73.8%) than in tower footprints (58.8%), and lower tussock meadow representation (15.6% and 30.3%, respectively). These differences were consistent with known variation in vegetation-specific CH 4 emissions. Our results highlight that combining footprint modeling with land cover characterization can enhance interpretations of CH 4 fluxes and guide cross-platform comparisons.

JGR Atmospheres↗
USGS2024

A decade of shaking in the Garden City: The dynamics of preparedness, perceptions, and beliefs in Canterbury, New Zealand, and implications for earthquake information

This study explored earthquake preparedness over time - before, during, and 10 years after the Canterbury Earthquake Sequence (CES) in Aotearoa New Zealand (NZ). Surveys of Canterbury residents were conducted in 2009, 2013 and again in 2021, using variables derived from Community Engagement Theory (CET). The surveys measured earthquake perceptions and beliefs, participation and engagement, and preparedness actions. Results were compared across the three samples. Findings indicate that perceptions and beliefs (e.g. risk perception, outcome expectancy beliefs), and types of preparedness actions taken (e.g. collection of survival items, structural preparedness, community and agency relationships), differed over time, depending on people’s experiences before, during, and after the CES. For example, during and after the CES people were more likely to believe that preparing provided a benefit to daily life, but less likely to think it could reduce property damage, perhaps due to people’s experiences of disruption and damage during the earthquakes. An understanding of such dynamics can assist with the provision and timing of risk and preparedness information. This study highlights the importance of providing applicable and actionable preparedness information, that is relevant to people’s experiences, throughout an earthquake sequence. Such information might evolve and change in focus over time depending on risks and needs. Focus could also be given to information that builds peoples beliefs and capacities to undertake preparedness in evolving situations. Understanding preparedness in the context of different experiences and timeframes is useful in helping update models such as the CET, where the dynamics of time might be better incorporated.

Canterbury↗
USGS2025

A framework for understanding the effects of subsurface agricultural drainage on downstream flows

Understanding controls on streamflow volume and magnitude is important to water resource management applications, such as critical water and transportation structure design and floodplain mapping. Changes in land use and agricultural practices, such as subsurface agricultural drainage, may be contributing to changes in streamflow characteristics. Subsurface agricultural drainage, also known as tile drainage, is the practice of installing drains in the subsurface of agricultural fields to improve productivity. Because of the complex interactions between subsurface drainage systems, precipitation, local soil conditions, and land management practices, it is difficult to determine how subsurface agricultural drainage affects downstream flow. Previously developed subsurface agricultural drainage conceptual models under dry, saturated, and winter conditions are summarized, and current literature on the effects of subsurface agricultural drainage on downstream flows, focusing on peak flow, non-event flow, and total flow to develop frameworks for discussing these systems is compiled. The effects that subsurface drainage has on hydrologic systems are expected to vary by site and are seasonally based on system design, soil type, moisture conditions, precipitation characteristics, and land conditions. Subsurface drainage can affect the magnitude of peak flow by converting surface runoff from a storm event to subsurface runoff. By increasing hydrologic connectivity of a catchment, subsurface drainage can increase non-event flow or the flow between two storm events, typically dependent on lateral flow through the subsurface and groundwater. Theoretically, by diverting water from groundwater recharge or by reducing water available for evapotranspiration, subsurface drainage may increase the total volume of flow. Precipitation changes may increase infiltration, excess overland flow, and flood risk regardless of the presence or absence of subsurface drainage.

Illinois, Iowa, Michigan, Minnesota, Missouri, Mon↗
USGS2026

Localization of spatiotemporally heterogeneous subsurface flows using autoencoder-based deep learning framework for time-lapse self-potential tomography

Self-potential (SP) monitoring has emerged as a valuable method for characterizing subsurface hydrogeological features and processes due to its sensitivity to fluid-induced electrokinetic effects. Despite advancements in SP inversion, challenges remain in imaging groundwater dynamics from SP activities due to complex hydrological settings and transient noise. In this study, a deep learning autoencoder (AE)-based framework is proposed for the spatiotemporal localization of subsurface fluid movement from time-lapse SP tomography. Temporal segments of time-lapse numerical inversions were first derived from long-term SP monitoring conducted from a floodplain site in Oak Ridge, Tennessee, known for active hyporheic exchange. Subsequently, AE models based on vision transformer (ViT), convolutional long short-term memory (ConvLSTM), convolutional neural network, and temporal convolutional network were individually trained and compared on the SP tomography segments for reconstruction performance. Finally, the reconstruction error over time serves as an anomaly score to identify moments of active SP variation, whereas spatial distributions of errors within these moments are analyzed to image and localize regions associated with anomalous subsurface fluid movement. The results demonstrate that ConvLSTM- and ViT-AE are most capable for the localization task with contrasting error distributions and consistent delineation of anomalies. Applying the method to both SP arrays parallel and perpendicular to the stream produced consistent anomaly zones near a fault or karst feature, validating the robustness and generalization of the approach. These results demonstrate the potential of the proposed framework as a scalable and interpretable tool for spatiotemporal analysis of subsurface flow dynamics in complex hydrogeological systems.

Tennessee↗
USGS2024

Earthquake-triggered ground-failure inventory associated with the M7.1 2018 Southcentral Alaska earthquake

The 30 November 2018, magnitude (Mw) 7.1 earthquake in Southcentral Alaska triggered substantial landslides, liquefaction, and ground cracking throughout the region, resulting in widespread geotechnical damage to buildings and infrastructure. Despite a challenging reconnaissance and remote-sensing environment, we constructed a detailed digital inventory of ground failure associated with the event from several sources. Sources included information derived from remotely sensed data, and data compiled from literature, social media postings, and earthquake damage information compiled by local, state, and federal agencies. Each instance of ground failure within the inventory contains information on the location and type of observed ground failure, and the methods and data used to document the occurrence. Where high-quality data, such as LIDAR or satellite imagery, were available and showed the ground-failure instance clearly, the extent is mapped as a polygon or polyline. All other locations are mapped as points. There are a total of 886 ground-failure instances documented within the inventory (400 landslides, 286 liquefaction features, and 200 features unattributed to specific processes). A semi-quantitative confidence scheme is used to describe mapping certainty associated with each ground-failure feature. This inventory represents a relatively moderate ground-failure-triggering event that occurred in a subarctic environment. This data paper describes the content within the inventory, the inventory data collection procedures, and limitations of the data. Events of this type are not often documented in detail; thus, adding the inventory data to the US Geological Survey Open Repository of Earthquake-Triggered Ground-Failure Inventories further diversifies the datasets available to the scientific community to be used to better understand and model earthquake-triggered ground failure.

Alaska↗
USGS2026

Cajon Pass and the southern San Andreas Fault System: Earthquake cycle stress accumulation and present-day loading

With over a century since the last major rupture affecting the wider Los Angeles region, tectonic stress has steadily built along the southern San Andreas and San Jacinto fault systems, raising concerns of an imminent large earthquake. Cajon Pass, located at the junction of these faults, represents a critical site for potential through-going ruptures in Southern California. We constructed new 4D earthquake cycle simulations using a 1000-year paleoseismic rupture history of the San Andreas Fault System (SAFS) to assess spatial and temporal variations in stress. A semi-analytic Fourier transform model was used to compute stress from 3D dislocations in an elastic plate overlying a Maxwell viscoelastic half-space, assuming a complete coseismic reset of resolved shear stress on ruptured elements. Results show highest stress accumulation north of Cajon Pass (∼1.8 MPa/100 years) due to greater slip rates, and lower rates south of Cajon Pass (∼1.0–1.5 MPa/100 years). By 2025, Coulomb stress is estimated at 2.8 MPa on the Mojave South (MOS) segment, 1.8 MPa on the North San Bernardino (NSB1) segment and 3.6 MPa on the San Jacinto Bernardino (SJB) segment. Segments accumulate stresses with characteristic ranges of pre-event stress interpreted as failure thresholds: 1.2–2.7 MPa for MOS, 0.4–1.6 MPa for NSB1, and 1.2–2.9 MPa for SJB. When the stress disparity between segments SJB and MOS narrows, the faults appear to rupture jointly, suggesting that stress levels may control how Cajon Pass acts as an earthquake gate. These results may inform seismic hazard assessments by linking stress evolution to fault interactions.

California↗
USGS2025

The impact of burial diagenesis on soil-formed minerals in paleosols using stable isotopes of phyllosilicates and carbonate clumped isotopes

To understand the effects of burial diagenesis on the stable isotope geochemistry of soil-formed clay and carbonate minerals in paleosols, samples were collected from seven cores, spanning middle- to upper-Pennsylvanian strata of the Illinois Basin, with varied maximum burial depths of 1–3 km. Mixed-layer illite-smectite and kaolinite mixtures give δ 2 H and δ 18 O values of −83 ‰ to −36 ‰ and 11.9 ‰ to 21.1 ‰ (VSMOW), respectively. After carbonates were screened petrographically for diagenetic textures using transmitted light and cathodoluminescence, measured clumped isotope Δ 47 values range from 0.504 to 0.563 ‰ (I-CDES). Resulting mineral formation temperatures for phyllosilicate mineral mixtures are 28 to 66 °C (mean = 47 °C), whereas T(Δ 47 ) estimates for calcites are 36 to 61 °C (mean = 45 °C). Calculated δ 18 O water values from which phyllosilicate minerals and calcites precipitated under isotopic equilibrium ranges from −7.1 to −1.2 ‰ and − 1.4 to +4.9 ‰, respectively. Closed and open-system phyllosilicate-fluid exchange modeling indicates that phyllosilicate alteration occurred in the presence of a low temperature brine or meteoric water and is interpreted to occur in a layer-by-layer illitization transformation. Due to the lack of diagenetic textures and positively correlated T(Δ 47 ) and δ 18 O water , calcites are interpreted to have undergone solid-state bond reordering. Despite low to moderate temperatures (<125 °C) and varying depths of shallow burial (1–3 km), solid-state transformation of phyllosilicates and calcites indicates paleosols had prolonged exposure to burial conditions which has implications for the use of paleosol minerals for paleoenvironmental reconstructions.

Illinois, Indiana, Kentucky↗
USGS2025

Gas emissions from the Sulphur Bank Mercury Mine hydrothermal system, Clear Lake volcanic field, California

The Sulphur Bank Mercury Mine (SBMM) hydrothermal system offers insights into active degassing processes in the Clear Lake volcanic field (CLVF), a high-threat region based on its record of Holocene eruptions and proximity to populated areas. Here we present chemical and isotopic analyses of gas samples collected between 2015 and 2023, along with the first comprehensive CO 2 flux survey of the SBMM area conducted in 2023. Sampled gases are CO 2 - and CH 4 -rich (≥84 and 6 mol% in dry gas, respectively) with high mantle-derived helium contributions ( 3 He/ 4 He = 6.54–7.86 R C /R A ). Carbon isotopic compositions of CO 2 (δ 13 C = −10.0 to −9.5 ‰) and CH 4 (δ 13 C = −35.8 ‰) indicate mixed sources, with significant contributions from metamorphism of organic-rich Franciscan Complex rocks hosting the hydrothermal system. Modeling of gas compositions shows that scrubbing by interaction with air-saturated groundwater strongly influences observed compositional variability. From our CO₂ flux measurements, we estimate the deeply derived CO 2 emission rate from the SBMM hydrothermal area (0.2 km 2 ) at 240 t d −1 , comparable to many quiescently degassing volcanoes worldwide. We also provide a first-order estimate of CH 4 emissions at approximately 0.5 t d −1 . Our findings establish crucial baseline data for future volcanic monitoring efforts, enhancing detection capabilities for potential changes in this active hydrothermal system. This work contributes to the broader understanding of volatile contributions from volcanic and metamorphic sources to the global carbon budget, while highlighting the strong influence of bedrock geology on gas compositions in the CLVF.

California↗
USGS2026

Re-examining the growing degree day minimum for grass carp spawning initiation in Lake Erie: Have we missed the mark?

Understanding the timing of life history processes of invasive fish species, such as adult aggregations during spawning, allows natural resource managers to optimize targeted population control efforts. Temperature-based estimates of the timing of spawning initiation for grass carp ( Ctenopharyngodon idella ) exist from its native range, but have not previously been developed for grass carp reproduction in its invaded range in the Laurentian Great Lakes of North America. We accounted for differences among methods across studies and calculated cumulative growing degree days (GDD) for the dates of grass carp egg capture in Lake Erie tributaries (Sandusky, Maumee, and Huron rivers) during 2015–2024 and compared these values to the existing GDD base 15°C requirement estimate from the native range (633 GDD–15°C). The earliest egg detection in Lake Erie (Sandusky River) was 19 GDD–15°C or 361 GDD–5°C (latest egg detection was 2285 GDD–5°C from the Sandusky River), indicating that spawning was initiated up to 25 days earlier than would be predicted by the native range GDD. Moreover, spawning in Lake Erie tributaries occurred earlier than predicted for 58% of spawning events examined based on the native range GDD. The GDD values for spawning initiation in Lake Erie tributaries can be used to refine the timing of control efforts targeting pre-spawn and spawning adult fish, inform the timing of egg sampling, and provide linkages to existing early life stage models to infer the length of the growing season available for age-0 fish to reassess tributary suitability.

Lake Erie, Maumee, River, Sandusky river↗
USGS2026

Comparative crop yield forecasting using satellite-derived biophysical and agro-climatic predictors in Sub-Saharan Africa

Timely and accurate crop yield forecasting is central to food security early warning systems, particularly in climate-vulnerable regions. While operational forecasting frameworks commonly rely on precipitation and vegetation indices such as NDVI, their ability to provide actionable lead time remains limited. Here, we evaluate the added value of satellite-derived biophysical Essential Climate Variables (ECVs): Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation (FAPAR), for forecasting millet yield in Burkina Faso (BF) and maize yield in South Africa (ZA) and Malawi (MW). Using Random Forest models, we quantify forecast skill across the growing season at both national and sub-national scales. Results show that LAI and FAPAR provide effective forecast lead times of approximately 4 months in BF, 2 months in ZA, and up to 6 months in MW relative to harvest. At peak performance, Mean Absolute Percentage Error (MAPE) reaches 19.8% (LAI) and 23.8% (FAPAR) in BF, 12.0% and 9.8% in ZA, and 21.8% and 20.8% in MW, respectively. Across countries, biophysical parameters often outperform NDVI and precipitation, particularly in arid and semi-arid regions. At the sub-national level, LAI and FAPAR enable classification of administrative units into high and moderate-skill forecast units, revealing strong spatial heterogeneity linked to crop dominance. However, forecast skill declines where the target crop is not the dominant type, highlighting an important limitation for operational deployment. Overall, the findings suggest that satellite-derived biophysical parameters can provide earlier and more spatially resolved yield signals than commonly used predictors, with potential to improve the timeliness and effectiveness of food security early warning systems.

Remote Sensing Applications: Society and Environme↗
USGS2026

Rupture into slow-slip fault regime during the 2018 Mw 6.9 Island of Hawaiʻi earthquake is followed by modest postseismic slip

On 4 May 2018, a M w 6.9 earthquake occurred on the south flank of Kīlauea, in the midst of an historic event that included a voluminous eruption from Kīlauea’s lower East Rift zone and caldera collapse at its summit. The earthquake was a consequence of both short‐ and long‐term stress buildup due to magmatic activity associated with the eruption and steady flank motion, respectively, and it revealed features of Kīlauea’s décollement fault that can inform understanding of future earthquake activity. We used geodetic data to determine the distributions of slip during the coseismic and postseismic periods and compared these with areas of known fault slip during past earthquakes and slow‐slip events (SSEs). The 2018 earthquake ruptured into an area of the décollement fault that was active during quasi‐regular SSEs that occurred in the two decades prior to 2018 but that have not been observed since. The coseismic slip model indicates that the amount of motion on the décollement fault was several times greater than what typically occurred during SSEs, suggesting that it may take decades for the fault to rebuild stress to the point at which SSEs will occur again. Postseismic afterslip also occurred in an area of the fault known to experience slow slip; however, unlike at other creeping faults, postseismic afterslip was rapid, being largely over within 2–3 days. The rapid nature and small magnitude of the postseismic afterslip may be due to the lack of a viscoelastic relaxation component, which is possibly a result of the shallow dip of the décollement fault not transferring stress efficiently into the lower crust.

Hawaii↗
USGS2025

International data gaps at the Center for Engineering Strong Motion Data

The Center for Engineering Strong Motion Data (CESMD) is utilized by seismologists, engineers, and disaster management professionals in the US and has historically achieved and distributed waveforms from across the globe for significant earthquakes. The increased access to the waveforms via Web API (Application Programming Interface) offers a unique opportunity to provide the community complete datasets, sampling a variety of tectonic environments and geologic conditions, increasing the number of available ground motion records for use in ground motion models (GMMs) and improving the accuracy of earthquake engineering evaluations. The objective of this study is to programmatically identify gaps in global event data from the past decade and backfill missing data gaps at CESMD. We first compare the CESMD catalog with the Advanced National Seismic System (ANSS) Comprehensive Earthquake Catalog identifying regions and time periods where strong-motion data is limited or inadequate. To backfill datasets at CESMD for significant events, we pinpoint regions and time intervals that lack information, creating a list of events for which we’d like to obtain data. An important facet of this work is identifying the source of data and metadata across earthquake repositories around the world and integrating these data repositories into our current strong-motion data processing workflow. In parallel with these newly processed datasets, we are developing a script to produce data origination citations to include provenance and attribution information to associate with respective datasets at CESMD. We showcase our methodology for identifying and filling data gaps at CESMD using three case studies (the 2018 Anchorage Alaska earthquake sequence, seismicity associated with the 2018 Hawaiian Kilauea volcano eruption, and several earthquakes in Turkey) and then outline our strategy to apply our data gap backfilling methods on an international scale.

Conference Paper↗
USGS2026

Postglacial ecosystem development of a hydrothermal landscape in Yellowstone National Park

The Yellowstone geo-ecosystem has been the subject of much research, but the ecological history of the Yellowstone Plateau volcanic field and its iconic geyser basins is less known. In this investigation, paleoenvironmental analyses of sediment cores from lakes in Lower Geyser Basin were compared with regional records and paleoclimate model simulations to reconstruct the vegetation, wildfire, limnology, hydrothermal dynamics, and climate drivers since deglaciation, 15,000 to 14,000 years ago. Pollen data from Lower Geyser Basin lakes reveal the strong influence of infertile rhyolitic soils on vegetation history: an initial late-glacial steppe was replaced by lodgepole pine forest from 12.8 to 11.0 ka, with little change in forest composition or cover thereafter despite changing climate. This stability contrasts with the more dynamic vegetation response on nonrhyolite substrates in the Yellowstone region where nutrient and moisture availability is greater. Highest wildfire activity and low lake nutrient levels in Lower Geyser Basin occurred from 12 to 4 ka, when summers were substantially warmer and drier and fire-inducing vapor pressure deficits were 29 to 56% higher. The hydrothermal history, inferred from sedimentary arsenic and cesium abundances, was spatially and temporally variable but lake-forming hydrothermal events align with periods of abundant moisture. Thus, long-term changes in wildfire, limnology, and, to some extent, hydrothermal activity were governed by insolation-driven climate variations, whereas the vegetation response was muted and constrained by geologic processes. These findings suggest that warmer, drier conditions in the future could result in less hydrothermal activity yet little change in forest cover across the Yellowstone Plateau volcanic field despite more wildfires.

Idaho, Montana, Wyoming↗