Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Energy Sources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS2003

Source mechanism of long-period events at Kusatsu-Shirane Volcano, Japan, inferred from waveform inversion of the effective excitation functions

We investigate the source mechanism of long-period (LP) events observed at Kusatsu-Shirane Volcano, Japan, based on waveform inversions of their effective excitation functions. The effective excitation function, which represents the apparent excitation observed at individual receivers, is estimated by applying an autoregressive filter to the LP waveform. Assuming a point source, we apply this method to seven LP events the waveforms of which are characterized by simple decaying and nearly monochromatic oscillations with frequency in the range 1-3 Hz. The results of the waveform inversions show dominant volumetric change components accompanied by single force components, common to all the events analyzed, and suggesting a repeated activation of a sub-horizontal crack located 300 m beneath the summit crater lakes. Based on these results, we propose a model of the source process of LP seismicity, in which a gradual buildup of steam pressure in a hydrothermal crack in response to magmatic heat causes repeated discharges of steam from the crack. The rapid discharge of fluid causes the collapse of the fluid-filled crack and excites acoustic oscillations of the crack, which produce the characteristic waveforms observed in the LP events. The presence of a single force synchronous with the collapse of the crack is interpreted as the release of gravitational energy that occurs as the slug of steam ejected from the crack ascends toward the surface and is replaced by cooler water flowing downward in a fluid-filled conduit linking the crack and the base of the crater lake. ?? 2003 Elsevier Science B.V. All rights reserved.

Journal of Volcanology and Geothermal Research↗
USGS2022

New insights into the occurrence and implications of mobile water in gas hydrate systems

Gas hydrate production technologies commonly feature reservoir depressurization. Depressurization occurs when a pressure gradient is established in a well, drawing mobile water from the reservoir and reducing reservoir pressure. As such, the occurrence of mobile water is a necessary condition for effective gas production from gas hydrate reservoirs using common borehole-based methods. However, recent field programs have revealed that mobile water exists widely within the overall gas hydrate reservoir system, including within overlying and underlying units once thought of as virtually impermeable seals. Further, excess free water may also be commonly found in hydrate-free or hydrate-poor permeable strata interbedded within the larger gas hydrate reservoir system. Such internal sources of water are complex to characterize, difficult to explain, potentially highly heterogeneous, and may pose significant challenges to depressurization-based production. This report summarizes the general occurrence of water in gas hydrate systems and select technical implications.

Journal of Energy and Fuels↗
USGS2014

Characterization of Lone Pine, California, tremolite asbestos and preparation of research material

Well-characterized amphibole asbestos mineral samples are required for use as analytical standards and in future research projects. Currently, the National Institute for Standards and Technology Standard Reference Material samples of asbestos are listed as ‘Discontinued’. The National Institute for Occupational Safety and Health (NIOSH) has a goal under the Asbestos Roadmap of locating and characterizing research materials for future use. Where an initial characterization analysis determines that a collected material is appropriate for use as a research material in terms of composition and asbestiform habit, sufficient amounts of the material will be collected to make it publicly available. An abandoned mine near Lone Pine, California, contains a vein of tremolite asbestos, which was the probable source of a reference material that has been available for the past 17 years from the Health and Safety Laboratory (HSL) in the UK. Newly collected fibrous vein material from this mine was analyzed at Research Triangle Institute (RTI International) with some additional analysis by the US Geological Survey’s Denver Microbeam Laboratory. The analysis at RTI International included: (i) polarized light microscopy (PLM) with a determination of principal optical properties; (ii) X-ray diffraction; (iii) transmission electron microscopy, including energy dispersive X-ray spectroscopy and selected-area electron diffraction; and (iv) spindle stage analysis using PLM to determine whether individual fibers and bundles of the samples were polycrystalline or single-crystal cleavage fragments. The overall findings of the study indicated that the material is tremolite asbestos with characteristics substantially similar to the earlier distributed HSL reference material. A larger quantity of material was prepared by sorting, acid-washing and mixing for sub-division into vials of ~10g each. These vials have been transferred from NIOSH to RTI International, from where they can be obtained on request.

California↗
USGS1991

Resource constraints in petroleum production potential

Geologic reasons indicate that the dominant position of the Middle East as a source of conventional petroleum will not be changed by new discoveries elsewhere. The share of world crude oil production coming from the Middle East could increase, within 10 to 20 years, to exceed 50 percent, under even modest increases in world consumption. Nonconventional resources of oil exist in large quantities, but because of their low production rates they can at best only mitigate extant trends. Increased production of natural gas outside the United States, however, offers an opportunity for geographically diversified energy supplies in the near future.

Science↗
USGS2019

Estimating the pressure-limited dynamic capacity and costs of basin-scale CO2 storage in a Saline Formation

Deployment of carbon capture and storage (CCS) could be necessary to be able to satisfy baseload electricity demand, maintain diversity in the energy mix, and achieve mitigation of carbon dioxide (CO 2 ) emissions at lowest cost ( IPCC, 2015 ; U.S. DOE, 2016 ). If basin-, regional- or national-scale deployment of CCS is needed, it may be possible to store only a small fraction of the captured CO 2 in oil and natural gas reservoirs. The vast majority would likely have to be stored in saline formations. Pressure buildup as a result of injecting CO 2 into such reservoirs is expected to be an important source of risk associated with CO 2 storage, and could constrain dynamic storage capacities (maximum injection rates) to be far below estimates based on access to theoretical storage resources. Estimates of CO 2 storage costs based on an assumption of practical availability of the theoretical storage resource could lead to underestimation of the costs of CO 2 storage. In this study, simulation results suggest that the pressure-limited dynamic CO 2 storage capacity of the Mount Simon Sandstone could be less than 4% of the theoretical storage resource in this saline formation, and storage costs could be an order of magnitude higher than recent estimates. However, consideration of the geologic heterogeneity in this deep saline formation allowed definition of a high injectivity zone, and estimated costs of CO 2 storage in this “sweet spot” of the reservoir approached recent estimates that did not include costs for pressure management.

Illinois, Indiana, Kentucky↗
USGS2005

An evaluation of the U.S. Geological Survey World Petroleum Assessment 2000

This study compares the additions to conventional crude oil and natural gas reserves as reported from January 1996 to December 2003 with the estimated undiscovered and reserve-growth volumes assessed in the U.S. Geological Survey World Petroleum Assessment 2000, which used data current through 1995. Approximately 28% of the estimated additions to oil reserves by reserve growth and approximately 11% of the estimated undiscovered oil volumes were realized in the 8 yr since the assessment (27% of the time frame for the assessment). Slightly more than half of the estimated additions to gas reserves by reserve growth and approximately 10% of the estimated undiscovered gas volumes were realized. Between 1995 and 2003, growth of oil reserves in previously discovered fields exceeded new-field discoveries as a source of global additions to reserves of conventional oil by a ratio of 3:1. The greatest amount of reserve growth for crude oil occurred in the Middle East and North Africa, whereas the greatest contribution from new-field discoveries occurred in sub-Saharan Africa. The greatest amount of reserve growth for natural gas occurred in the Middle East and North Africa, whereas the greatest contribution from new-field discoveries occurred in the Asia Pacific region. On an energy-equivalent basis, volumes of new gas-field discoveries exceeded new oil-field discoveries. Copyright ?? 2005. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2005

Compilation of geologic, hydrologic, and ground-water flow modeling information for the Spokane Valley-Rathdrum Prairie aquifer, Spokane County, Washington, and Bonner and Kootenai Counties, Idaho

The U.S. Geological Survey, in cooperation with the Idaho Department of Water Resources and Washington Department of Ecology compiled and described geologic, hydrologic, and ground-water flow modeling information about the Spokane Valley-Rathdrum Prairie (SVRP) aquifer in northern Idaho and northeastern Washington. Descriptions of the hydrogeologic framework, water-budget components, ground- and surface-water interactions, computer flow models, and further data needs are provided. The SVRP aquifer, which covers about 370 square miles including the Rathdrum Prairie, Idaho and the Spokane valley and Hillyard Trough, Washington, was designated a Sole Source Aquifer by the U.S. Environmental Protection Agency in 1978. Continued growth, water management issues, and potential effects on water availability and water quality in the aquifer and in the Spokane and Little Spokane Rivers have illustrated the need to better understand and manage the region's water resources. The SVRP aquifer is composed of sand, gravel, cobbles, and boulders primarily deposited by a series of catastrophic glacial outburst floods from ancient Glacial Lake Missoula. The material deposited in this high-energy environment is coarser-grained than is typical for most basin-fill deposits, resulting in an unusually productive aquifer with well yields as high as 40,000 gallons per minute. In most places, the aquifer is bounded laterally by bedrock composed of granite, metasedimentary rocks, or basalt. The lower boundary of the aquifer is largely unknown except along the margins or in shallower parts of the aquifer where wells have penetrated its entire thickness and reached bedrock or silt and clay deposits. Based on surface geophysics, the thickness of the aquifer is about 500 ft near the Washington-Idaho state line, but more than 600 feet within the Rathdrum Prairie and more than 700 feet in the Hillyard trough based on drilling records. Depth to water in the aquifer is greatest in the northern Rathdrum Prairie (about 500 feet) and least near the city of Spokane along the Spokane River (less than about 50 feet). Ground-water flow is south from near the southern end of Lake Pend Oreille and Hoodoo Valley, through the Rathdrum Prairie, then west toward Spokane. In Spokane, the aquifer splits and water moves north through the Hillyard Trough as well as west through the Trinity Trough. From the Trinity Trough water flows north along the western arm of the aquifer. The aquifer's discharge area is along the Little Spokane River and near Long Lake, Washington. A compilation of estimates of water-budget components, including recharge (precipitation, irrigation, canal leakage, septic tank effluent, inflow from tributary basins, and flow from the Spokane River) and discharge (withdrawals from wells, flow to the Spokane and Little Spokane Rivers, evapotranspiration, and underflow to Long Lake) illustrates that these estimated values should be compared with caution due to several variables including the area and time period of interest as well as methods employed in making the estimates. Numerous studies have documented the dynamic ground-water and surface-water interaction between the SVRP aquifer and the Spokane and Little Spokane Rivers. Gains and losses vary throughout the year, as well as the locations of gains and losses. September 2004 streamflow measurements indicated that the upper reach of the Spokane River between Post Falls and downstream at Flora Road lost 321 cubic feet per second. A gain of 736 cubic feet per second was measured between the Flora Road site and downstream at Green Street Bridge. A loss of 124 cubic feet per second was measured for the reach between the Green Street Bridge and the Spokane River at Spokane gaging station. The river gained about 87 cubic feet per second between the Spokane River at Spokane gaging station and the TJ Meenach Bridge. Overall, the Spokane River gained about 284 cubic feet per second between the Post Falls,

Scientific Investigations Report↗
USGS2016

Volatile-organic molecular characterization of shale-oil produced water from the Permian Basin

Growth in unconventional oil and gas has spurred concerns on environmental impact and interest in beneficial uses of produced water (PW), especially in arid regions such as the Permian Basin, the largest U.S. tight-oil producer. To evaluate environmental impact, treatment, and reuse potential, there is a need to characterize the compositional variability of PW. Although hydraulic fracturing has caused a significant increase in shale-oil production, there are no high-resolution organic composition data for the shale-oil PW from the Permian Basin or other shale-oil plays (Eagle Ford, Bakken, etc.). PW was collected from shale-oil wells in the Midland sub-basin of the Permian Basin. Molecular characterization was conducted using high-resolution solid phase micro extraction gas chromatography time-of-flight mass spectrometry. Approximately 1400 compounds were identified, and 327 compounds had a >70% library match. PW contained alkane, cyclohexane, cyclopentane, BTEX (benzene, toluene, ethylbenzene, and xylene), alkyl benzenes, propyl-benzene, and naphthalene. PW also contained heteroatomic compounds containing nitrogen, oxygen, and sulfur. 3D van Krevelen and double bond equivalence versus carbon number analyses were used to evaluate molecular variability. Source composition, as well as solubility, controlled the distribution of volatile compounds found in shale-oil PW. The salinity also increased with depth, ranging from 105 to 162 g/L total dissolved solids. These data fill a gap for shale-oil PW composition, the associated petroleomics plots provide a fingerprinting framework, and the results for the Permian shale-oil PW suggest that partial treatment of suspended solids and organics would support some beneficial uses such as onsite reuse and bio-energy production.

New Mexico, Texas↗
USGS2008

Comparison of two U.S. power-plant carbon dioxide emissions data sets

Estimates of fossil-fuel CO2 emissions are needed to address a variety of climate-change mitigation concerns over a broad range of spatial and temporal scales. We compared two data sets that report power-plant CO 2 emissions in the conterminous U.S. for 2004, the most recent year reported in both data sets. The data sets were obtained from the Department of Energy's Energy Information Administration (EIA) and the Environmental Protection Agency's eGRID database. Conterminous U.S. total emissions computed from the data sets differed by 3.5% for total plant emissions (electricity plus useful thermal output) and 2.3% for electricity generation only. These differences are well within previous estimates of uncertainty in annual U.S. fossil-fuel emissions. However, the corresponding average absolute differences between estimates of emissions from individual power plants were much larger, 16.9% and 25.3%, respectively. By statistical analysis, we identified several potential sources of differences between EIA and eGRID estimates for individual plants. Estimates that are based partly or entirely on monitoring of stack gases (reported by eGRID only) differed significantly from estimates based on fuel consumption (as reported by EIA). Differences in accounting methods appear to explain differences in estimates for emissions from electricity generation from combined heat and power plants, and for total and electricity generation emissions from plants that burn nonconventional fuels (e.g., biomass). Our analysis suggests the need for care in utilizing emissions data from individual power plants, and the need for transparency in documenting the accounting and monitoring methods used to estimate emissions.

Environmental Science & Technology↗
USGS2026

Erosional and hydrological controls on the age and thermochemical stability of particulate organic carbon in an Arctic river

Understanding the mechanisms that drive the mobilization and fate of organic carbon (OC) in Arctic landscapes is important for modeling the feedbacks among permafrost thaw, carbon cycling, and climate change. While significant progress has been made toward measuring in situ OC decomposition in permafrost soils and bulk particulate organic carbon (POC) export from Arctic rivers, few studies have distinguished the source and lability of POC across Arctic landscapes, limiting our ability to predict whether mobilized POC will be oxidized to CO 2 and CH 4 or buried in downstream depositional environments. This study uses ramped pyrolysis/oxidation radiocarbon (RPO- 14 C) analyses to investigate spatial and temporal variations in the thermochemical stability and radiocarbon content of fluvial POC during downstream transport from mountains to the coast in the Canning River (North Slope, Alaska). Fluvial POC in the headwaters is predominantly comprised of high activation energy, thermally recalcitrant petrogenic OC (OC petro ) derived from shale bedrock. Moving into the foothills and low-relief coastal plains, river bank erosion primarily drives mobilization of labile, low activation energy, soil-derived OC (OC soil ). Fluvial POC in mountainous upstream reaches consisted of ∼70% OC petro and just ∼30% OC soil , while POC in the downstream coastal plain reaches comprised ∼85% OC soil and ∼15% OC petro . The high relative lability of POC exported to the coast indicates high susceptibility to oxidation and microbial decomposition, which could enhance CO 2 release as the Arctic hydrologic cycle intensifies. However, the persistence of refractory OC petro in the suspended load indicates the potential for long-term burial of rock organic carbon in marine sediments.

Alaska↗
USGS1990

Monitoring the hydrologic system for potential effects of geothermal and ground-water development in the Long Valley caldera, Mono County, California, U.S.A

In the early 1980's, renewed interest in the geothermal potential of the Long Valley caldera, California, highlighted the need to balance the benefits of energy development with the established recreational activities of the area. The Long Valley Hydrologic Advisory Committee, formed in 1987, instituted a monitoring program to collect data during the early stages of resource utilization to evaluate potential effects on the hydrologic system. Early data show declines in streamflow, spring flow, and ground-water levels caused by 6 years of below-average precipitation. Springs in the Hot Creek State Fish Hatchery area discharge water that is a mixture of nonthermal and hydrothermal components. Possible sources of nonthermal water have been identified by comparing deuterium concentrations in streams and springs. The equivalent amount of undiluted thermal water discharged from the springs was calculated on the basis of boron and chloride concentrations. Quantifying the thermal and nonthermal fractions of the total flow may allow researchers to assess changes in flow volume or temperature of the springs caused by groundwater or geothermal development.

Conference Paper↗
USGS1990

Monitoring the hydrologic system for potential effects of geothermal and ground-water development in the Long Valley caldera, Mono County, California, U.S.A.

In the early 1980's, renewed interest in the geothermal potential of the Long Valley caldera, California, highlighted the need to balance the benefits of energy development with the established recreational activities of the area. The Long Valley Hydrologic Advisory Committee, formed in 1987, instituted a monitoring program to collect data during the early stages of resource utilization to evaluate potential effects on the hydrologic system. Early data show declines in streamflow, spring flow, and ground-water levels caused by 6 years of below-average precipitation. Springs in the Hot Creek State Fish Hatchery area discharge water that is a mixture of nonthermal and hydrothermal components. Possible sources of nonthermal water have been identified by comparing deuterium concentrations in streams and springs. The equivalent amount of undiluted thermal water discharged from the springs was calculated on the basis of boron and chloride concentrations. Quantifying the thermal and nonthermal fractions of the total flow may allow researchers to assess changes in flow volume or temperature of the springs caused by groundwater or geothermal development.

California↗
USGS2025

Land change, fire, and climate weaken carbon sink in the conterminous U.S.

The land carbon sink of the conterminous United States was evaluated using a bottom-up modeling framework and 30-meter land change data from 1985 to 2020. This cross-scale, cross-landscape, and cross-system approach tracked fractional land cover changes and applied regional model calibration. Results show average terrestrial and aquatic carbon sinks of +110 ± 37 and +19 ± 0.5 teragrams of carbon per year, respectively. The terrestrial carbon sink, showing no clear trend, peaked in the 1990s, with more years as a carbon source since 2000, contradicting recent national and global studies. Land change had the largest impact (−70 ± 5.5 teragrams of carbon per year), exceeding impacts of climate (−33 ± 48 teragrams of carbon per year), wildfire (−7.7 ± 2.4 teragrams of carbon per year), and erosion transport (−1.9 ± 0.13 teragrams of carbon per year). The positive CO2 fertilization effect (+69 ± 12 teragrams of carbon per year) was insufficient to maintain the carbon sink strength. Our framework reveals key paths of carbon loss, with implications for carbon budget and energy policies in the United States and beyond.

conterminous United States↗
USGS2013

Evidence for deposition of 10 million tonnes of impact spherules across four continents 12,800 y ago

Airbursts/impacts by a fragmented comet or asteroid have been proposed at the Younger Dryas onset (12.80 ± 0.15 ka) based on identification of an assemblage of impact-related proxies, including microspherules, nanodiamonds, and iridium. Distributed across four continents at the Younger Dryas boundary (YDB), spherule peaks have been independently confirmed in eight studies, but unconfirmed in two others, resulting in continued dispute about their occurrence, distribution, and origin. To further address this dispute and better identify YDB spherules, we present results from one of the largest spherule investigations ever undertaken regarding spherule geochemistry, morphologies, origins, and processes of formation. We investigated 18 sites across North America, Europe, and the Middle East, performing nearly 700 analyses on spherules using energy dispersive X-ray spectroscopy for geochemical analyses and scanning electron microscopy for surface microstructural characterization. Twelve locations rank among the world’s premier end-Pleistocene archaeological sites, where the YDB marks a hiatus in human occupation or major changes in site use. Our results are consistent with melting of sediments to temperatures >2,200 °C by the thermal radiation and air shocks produced by passage of an extraterrestrial object through the atmosphere; they are inconsistent with volcanic, cosmic, anthropogenic, lightning, or authigenic sources. We also produced spherules from wood in the laboratory at >1,730 °C, indicating that impact-related incineration of biomass may have contributed to spherule production. At 12.8 ka, an estimated 10 million tonnes of spherules were distributed across ∼50 million square kilometers, similar to well-known impact strewnfields and consistent with a major cosmic impact event.

Proceedings of the National Academy of Sciences of↗
USGS2025

AAPG Energy and Minerals Division Tight Oil and Gas Committee Activities and Commodity Report for 2021-2022: Tuscaloosa Marine Shale, Gulf Coast basin, Louisiana and Mississippi

The Upper Cretaceous Tuscaloosa marine shale (TMS) potential production area encompasses 20.4 million acres across central Louisiana (LA), southern Mississippi (MS), southwestern Alabama (AL), and a small southwestern section of the Florida panhandle (Hackley et al., 2018). It remains a minor and largely undeveloped unconventional shale oil play with production from the TMS confined along the east-west LA-MS State boundary (Fig. 1). The mean undiscovered, technically recoverable resources in the TMS are estimated at 1.5 billion barrels of oil and 4.6 trillion cubic feet of gas (Hackley et al., 2018). Geochemical analyses of source rock solvent extracts and oil samples indicate that, in the play area, the TMS is the primary source of shale oil produced from the TMS as well as of accumulated oils in the underlying conventional reservoirs of the lower Tuscaloosa (Hackley et al., 2020). The API gravity of TMS oils ranges from approximately 34 to 46 degrees (Hackley et al., 2020; Croke et al., 2020).

AAPG Wiki↗
USGS2015

Ground motion-simulations of 1811-1812 New Madrid earthquakes, central United States

We performed a suite of numerical simulations based on the 1811–1812 New Madrid seismic zone (NMSZ) earthquakes, which demonstrate the importance of 3D geologic structure and rupture directivity on the ground‐motion response throughout a broad region of the central United States (CUS) for these events. Our simulation set consists of 20 hypothetical earthquakes located along two faults associated with the current seismicity trends in the NMSZ. The hypothetical scenarios range in magnitude from M 7.0 to 7.7 and consider various epicenters, slip distributions, and rupture characterization approaches. The low‐frequency component of our simulations was computed deterministically up to a frequency of 1 Hz using a regional 3D seismic velocity model and was combined with higher‐frequency motions calculated for a 1D medium to generate broadband synthetics (0–40 Hz in some cases). For strike‐slip earthquakes located on the southwest–northeast‐striking NMSZ axial arm of seismicity, our simulations show 2–10 s period energy channeling along the trend of the Reelfoot rift and focusing strong shaking northeast toward Paducah, Kentucky, and Evansville, Indiana, and southwest toward Little Rock, Arkansas. These waveguide effects are further accentuated by rupture directivity such that an event with a western epicenter creates strong amplification toward the northeast, whereas an eastern epicenter creates strong amplification toward the southwest. These effects are not as prevalent for simulations on the reverse‐mechanism Reelfoot fault, and large peak ground velocities (>40  cm/s) are typically confined to the near‐source region along the up‐dip projection of the fault. Nonetheless, these basin response and rupture directivity effects have a significant impact on the pattern and level of the estimated intensities, which leads to additional uncertainty not previously considered in magnitude estimates of the 1811–1812 sequence based only on historical reports. The region covered by our simulation domain encompasses a large portion of the CUS centered on the NMSZ, including several major metropolitan areas. Based on our simulations, more than eight million people living and working near the NMSZ would experience potentially damaging ground motion and modified Mercalli intensities ranging from VI to VIII if a repeat of the 1811–1812 earthquakes occurred today. Moreover, the duration of strong ground shaking in the greater Memphis metropolitan area could last from 30 to more than 60 s, depending on the magnitude and epicenter.

Arkansas, Illinois, Kentucky, Missouri, Tennessee↗
USGS2010

Identifying regions of strong scattering at the core-mantle boundary from analysis of PKKP precursor energy

We detect seismic scattering from the core-mantle boundary related to the phase PKKP (PK. KP) in data from small aperture seismic arrays in India and Canada. The detection of these scattered waves in data from small aperture arrays is new and allows a better characterization of the fine-scale structure of the deep Earth especially in the southern hemisphere. Their slowness vector is determined from array processing allowing location of the heterogeneities at the core-mantle boundary using back-projection techniques through 1D Earth models. We identify strong scattering at the core-mantle boundary (CMB) beneath the Caribbean, Patagonia and the Antarctic Peninsula as well as beneath southern Africa. An analysis of the scattering regions relative to sources and receivers indicates that these regions represent areas of increased scattering likely due to increased heterogeneities close to the CMB. The 1. Hz array data used in this study is most sensitive to heterogeneity with scale lengths of about 10. km. Given the small size of the scatterers, a chemical origin of the heterogeneities is likely. By comparing the location of the fine-scale heterogeneity to geodynamical models and tomographic images, we identify different scattering mechanisms in regions related to subduction (Caribbean and Patagonia) and dense thermo chemical piles (Southern Africa). ?? 2010 Elsevier B.V.

Earth and Planetary Science Letters↗
USGS2021

Effect of an algal amendment on the microbial conversion of coal to methane at different sulfate concentrations from the Powder River Basin, USA

Biogenic methane is estimated to account for one-fifth of the natural gas worldwide and there is great interest in controlling methane from different sources. Biogenic coalbed methane (CBM) production relies on syntrophic associations between fermentative bacteria and methanogenic archaea to anaerobically degrade recalcitrant coal and produce methanogenic substrates. However, very little is known about how differences in geochemistry, hydrology, and microbial community composition influence subsurface carbon utilization and CBM production. The addition of an amendment consisting of microalgal biomass has previously been shown to increase CBM production while providing the possibility of a closed-loop fossil system where waste (production water) is used to grow algae to ultimately produce energy (methane). However, the efficiency of enhancing CBM production under different redox conditions remains unresolved. In this study, we focused on the U.S. Geological Survey's Birney test site (Montana, USA) that has nine wells vertically accessing four coal seams with varying geochemistry (low and high sulfate (SO 4 2− )) and methane production rates. We used organic matter (OM) in the form of algal biomass to discern the effect of this amendment on OM degradation and microbially enhanced CBM production potential under different geochemical constraints. We tracked changes in community composition, OM composition, organic carbon (OC) concentration, methane production, and nutrients in batch systems over six months. Methane production was detected only in microcosms from low SO 4 2− wells (168 to 800 μg methane per gram of coal). The OC consumption varied across time for all wells and the variation was greatest for the low SO 4 2− wells. Different groups of syntrophic bacteria were associated with net‑carbon consuming microcosms, and specifically Syntrophorhabdus was identified with several different statistical methods as a potentially important coal degrader. Results from this study provide insight into potential coal-degraders, the compositional changes in some of the different OM fractions, and trends in carbon consumption related to methane production across coal seams along the vertical SO 4 2− gradient.

Montana, Wyoming↗