Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Data”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
USGS1989

A terracing operator for physical property mapping with potential field data

The terracing operator works iteratively on gravity or magnetic data, using the sense of the measured field's local curvature, to produce a field comprised of uniform domains separated by abrupt domain boundaries. The result is crudely proportional to a physical-property function defined in one (profile case) or two (map case) horizontal dimensions. This result can be extended to a physical-property model if its behavior in the third (vertical) dimension is defined, either arbitrarily or on the basis of the local geologic situation. The terracing algorithm is computationally fast and appropriate to use with very large digital data sets. Where gravity and magnetic data are both available, terracing provides an effective means by which the two data sets can be compared directly. Results of the terracing operation somewhat resemble those of conventional susceptibility (or density) mapping. In contrast with conventional susceptibility mapping, however, the terraced function is a true step function, which cannot be depicted by means of contour lines. Magnetic or gravity fields calculated from the physical-property model do not, in general, produce an exact fit to the observed data. By intent, the terraced map is more closely analogous to a geologic map in that domains are separated by hard-edged domain boundaries and minor within-domain variation is neglected. The terracing operator was applied separately to aeromagnetic and gravity data from a 136 km X 123 km area in eastern Kansas. Results provide a reasonably good physical representation of both the gravity and the aeromagnetic data. Superposition of the results from the two data sets shows many areas of agreement that can be referenced to geologic features within the buried Precambrian crystalline basement. The emerging picture of basement geology is much better resolved than that obtained either from the scanty available drill data or from interpretation of the geophysical data by inspection.

Geophysics↗
USGS2017

Integrating Breeding Bird Survey and demographic data to estimate Wood Duck population size in the Atlantic Flyway

The U.S. Fish and Wildlife Service (USFWS) uses data from the North American Breeding Bird Survey (BBS) to assist in monitoring and management of some migratory birds. However, BBS analyses provide indices of population change rather than estimates of population size, precluding their use in developing abundance-based objectives and limiting applicability to harvest management. Wood Ducks ( Aix sponsa ) are important harvested birds in the Atlantic Flyway (AF) that are difficult to detect during aerial surveys because they prefer forested habitat. We integrated Wood Duck count data from a ground-plot survey in the northeastern U.S. with AF-wide BBS, banding, parts collection, and harvest data to derive estimates of population size for the AF. Overlapping results between the smaller-scale intensive ground-plot survey and the BBS in the northeastern U.S. provided a means for scaling BBS indices to the breeding population size estimates. We applied these scaling factors to BBS results for portions of the AF lacking intensive surveys. Banding data provided estimates of annual survival and harvest rates; the latter, when combined with parts-collection data, provided estimates of recruitment. We used the harvest data to estimate fall population size. Our estimates of breeding population size and variability from the integrated population model (N̄ = 0.99 million, SD = 0.04) were similar to estimates of breeding population size based solely on data from the AF ground-plot surveys and the BBS (N̄ = 1.01 million, SD = 0.04) from 1998 to 2015. Integrating BBS data with other data provided reliable population size estimates for Wood Ducks at a scale useful for harvest and habitat management in the AF, and allowed us to derive estimates of important demographic parameters (e.g., seasonal survival rates, sex ratio) that were not directly informed by data.

The Condor↗
USGS2020

Capturing, preserving and digitizing legacy seismic data from the Montserrat Volcano Observatory analog seismic network, July 1995 – December 2004

An eruption of the Soufrière Hills Volcano (SHV) on the eastern Caribbean island of Montserrat began on 18 July 1995 and continued until February 2010. Within nine days of the eruption onset, an existing four‐station analog seismic network (ASN) was expanded to 10 sites. Telemetered data from this network were recorded, processed, and archived locally using a system developed by scientists from the U.S. Geological Survey (USGS) Volcano Disaster Assistance Program (VDAP). In October 1996, a digital seismic network (DSN) was deployed with the ability to capture larger amplitude signals across a broader frequency range. These two networks operated in parallel until December 2004, with separate telemetry and acquisition systems (analysis systems were merged in March 2001). Although the DSN provided better quality data for research, the ASN featured superior real‐time monitoring tools and captured valuable data including the only seismic data from the first 15 months of the eruption. These successes of the ASN have been rather overlooked. This article documents the evolution of the ASN, the VDAP system, the original data captured, and the recovery and conversion of more than 230,000 seismic events from legacy SUDS, Hypo71, and Seislog formats into Seisan database with waveform data in miniSEED format. No digital catalog existed for these events, but students at the University of South Florida have classified two-thirds of the 40,000 events that were captured between July 1995 and October 1996. Locations and magnitudes were recovered for ~10,000 of these events. Real-time seismic amplitude measurement, seismic spectral amplitude measurement, and tiltmeter data were also captured. The result is that the ASN seismic dataset is now more discoverable, accessible, and reusable, in accordance with FAIR data principles. These efforts could catalyze new research on the 1995–2010 SHV eruption. Furthermore, many observatories have data in these same legacy data formats and might benefit from procedures and codes documented here.

Soufrière Hills Volcano↗
USGS2001

A data management life-cycle

Documented, reliable, and accessible data and information are essential building blocks supporting scientific research and applications that enhance society's knowledge base (fig. 1). The U.S. Geological Survey (USGS), a leading provider of science data, information, and knowledge, is uniquely positioned to integrate science and natural resource information to address societal needs. The USGS Central Energy Resources Team (USGS-CERT) provides critical information and knowledge on the quantity, quality, and distribution of the Nation's and the world's oil, gas, and coal resources. By using a life-cycle model, the USGS-CERT Data Management Project is developing an integrated data management system to (1) promote access to energy data and information, (2) increase data documentation, and (3) streamline product delivery to the public, scientists, and decision makers. The project incorporates web-based technology, data cataloging systems, data processing routines, and metadata documentation tools to improve data access, enhance data consistency, and increase office efficiency

Fact Sheet↗
USGS2000

Geographic Information for Analysis of Highway Runoff-Quality Data on a National or Regional Scale in the Conterminous United States

Spatial data are important for interpretation of water-quality information on a regional or national scale. Geographic information systems (GIS) facilitate interpretation and integration of spatial data. The geographic information and data compiled for the conterminous United States during the National Highway Runoff Water-Quality Data and Methodology Synthesis project is described in this document, which also includes information on the structure, file types, and the geographic information in the data files. This 'geodata' directory contains two subdirectories, labeled 'gisdata' and 'gisimage.' The 'gisdata' directory contains ArcInfo coverages, ArcInfo export files, shapefiles (used in ArcView), Spatial Data Transfer Standard Topological Vector Profile format files, and meta files in subdirectories organized by file type. The 'gisimage' directory contains the GIS data in common image-file formats. The spatial geodata includes two rain-zone region maps and a map of national ecosystems originally published by the U.S. Environmental Protection Agency; regional estimates of mean annual streamflow, and water hardness published by the Federal Highway Administration; and mean monthly temperature, mean annual precipitation, and mean monthly snowfall modified from data published by the National Climatic Data Center and made available to the public by the Oregon Climate Service at Oregon State University. These GIS files were compiled for qualitative spatial analysis of available data on a national and(or) regional scale and therefore should be considered as qualitative representations, not precise geographic location information.

Open-File Report↗
USGS2004

Seismic reflection and refraction data acquired in Canada Basin, Northwind Ridge and Northwind Basin, Arctic Ocean in 1988, 1992 and 1993

Seismic reflection and refraction data were collected in generally ice-covered waters of the Canada Basin and the eastern part of the Chukchi Continental Borderland of the Amerasia Basin, Arctic Ocean, during the late summers of 1988, 1992, and 1993. The data were acquired from a Polar class icebreaker, the U.S. Coast Guard Cutter Polar Star, using a seismic reflection system designed by the U.S. Geological Survey (USGS). The northernmost data extend to 78? 48' N latitude. In 1988, 155 km of reflection data were acquired with a prototype system consisting of a single 195 cubic inch air gun seismic source and a two-channel hydrophone streamer with a 150-m active section. In 1992 and 1993, 500 and 1,900 km, respectively, of seismic reflection profile data were acquired with an improved six air gun, 674 to 1303 cubic inch tuned seismic source array and the same two-channel streamer. In 1993, a 12-channel streamer with a 150-m active section was used to record five of the reflection lines and one line was acquired using a three air gun, 3,000 cubic inch source. All data were recorded with a DFS-V digital seismic recorder. Processed sections feature high quality vertical incidence images to more than 6 km of sub-bottom penetration in the Canada Basin. Refraction data were acquired with U.S. Navy sonobuoys recorded simultaneously with the seismic reflection profiles. In 1988 eight refraction profiles were recorded with the single air gun, and in 1992 and 1993 a total of 47 refraction profiles were recorded with the six air gun array. The sonobuoy refraction records, with offsets up to 35 km, provide acoustic velocity information to complement the short-offset reflection data. The report includes trackline maps showing the location of the data, as well as both digital data files (SEG-Y) and images of all of the profiles.

Open-File Report↗
USGS2007

The National Assessment of Shoreline Change: A GIS compilation of vector cliff edges and associated cliff erosion data for the California coast

The U.S. Geological Survey has generated a comprehensive data clearinghouse of digital vector cliff edges and associated rates of cliff retreat along the open-ocean California coast. These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Cliff erosion is a chronic problem along many coastlines of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of coastal cliff retreat. There is also a critical need for these data to be consistent from one region to another. One objective of this work is to a develop standard, repeatable methodology for mapping and analyzing cliff edge retreat so that periodic, systematic, and internally consistent updates of cliff edge position and associated rates of erosion can be made at a national scale. This data compilation for open-ocean cliff edges for the California coast is a separate, yet related study to Hapke and others, 2006 documenting shoreline change along sandy shorelines of the California coast, which is itself one in a series that includes the Gulf of Mexico and the Southeast Atlantic coast (Morton and others, 2004; Morton and Miller, 2005). Future reports and data compilations will include coverage of the Northeast U.S., the Great Lakes, Hawaii and Alaska. Cliff edge change is determined by comparing the positions of one historical cliff edge digitized from maps with a modern cliff edge derived from topographic LIDAR (light detection and ranging) surveys. Historical cliff edges for the California coast represent the 1920s-1930s time-period; the most recent cliff edge was delineated using data collected between 1998 and 2002. End-point rate calculations were used to evaluate rates of erosion between the two cliff edges. Please refer to our full report on cliff edge erosion along the California coastline at http://pubs.usgs.gov/of/2007/1133/ for additional information regarding methods and results (Hapke and others, 2007). Data in this report are organized into downloadable layers by region (Northern, Central and Southern California) and are provided as vector datasets with accompanying metadata. Vector cliff edges may represent a compilation of data from one or more sources and the sources used are included in the dataset metadata. This project employs the Environmental Systems Research Institute's (ESRI) ArcGIS as it's Geographic Information System (GIS) mapping tool and contains several data layers (shapefiles) that are used to create a geographic view of the California coast. The vector data form a basemap comprising polygon and line themes that include a U.S. coastline (1:80,000), U.S. cities, and state boundaries.

California↗
USGS2007

Compilation of water-resources data for Montana, water year 2006

The U.S. Geological Survey, Montana Water Science Center, in cooperation with other Federal, State, and local agencies, and Tribal governments, collects a large amount of data pertaining to the water resources of Montana each water year. This report is a compilation of Montana site-data sheets for the 2006 water year, which consists of records of stage and discharge of streams; water quality of streams and ground water; stage and contents of lakes and reservoirs; water levels in wells; and precipitation data. Site-data sheets for selected stations in Canada and Wyoming also are included in this report. The data for Montana, along with data from various parts of the Nation, are included in 'Water-Resources Data for the United States, Water Year 2006', which is published as U.S. Geological Survey Water-Data Report WDR-US-2006 and is available at http://pubs.water.usgs.gov/wdr2006. Additional water year 2006 data collected at crest-stage gage and miscellaneous-measurement stations were collected but were not published. These data are stored in files of the U.S. Geological Survey Montana Water Science Center in Helena, Montana, and are available on request.

Montana↗
USGS2009

Helicopter Electromagnetic and Magnetic Geophysical Survey Data for Portions of the North Platte River and Lodgepole Creek, Nebraska, June 2008

This report is a release of digital data from a helicopter electromagnetic and magnetic survey that was conducted during June 2008 in areas of western Nebraska as part of a joint hydrologic study by the North Platte Natural Resource District, South Platte Natural Resource District, and U.S. Geological Survey. The objective of the contracted survey, conducted by Fugro Airborne, Ltd., was to improve the understanding of the relationship between surface water and groundwater systems critical to developing groundwater models used in management programs for water resources. The survey covered 1,375 line km (854 line mi). A unique aspect of this survey is the flight line layout. One set of flight lines were flown paralleling each side of the east-west trending North Platte River and Lodgepole Creek. The survey also included widely separated (10 km) perpendicular north-south lines. The success of this survey design depended on a well understood regional hydrogeologic framework and model developed by the Cooperative Hydrologic Study of the Platte River Basin. Resistivity variations along lines could be related to this framework. In addition to these lines, more traditional surveys consisting of parallel flight lines separated by about 270 m were carried out for one block in each of the drainages. These surveys helped to establish the spatial variations of the resistivity of hydrostratigraphic units. The electromagnetic equipment consisted of six different coil-pair orientations that measured resistivity at separated frequencies from about 400 Hz to about 140,000 Hz. The electromagnetic data along flight lines were converted to electrical resistivity. The resulting line data were converted to geo-referenced grids and maps which are included with this report. In addition to the electromagnetic data, total field magnetic data and digital elevation data were collected. Data released in this report consist of data along flight lines, digital grids, and digital maps of the apparent resistivity and total magnetic field. The depth range of the subsurface investigation for the electromagnetic survey (estimated as deep as 60 m) is comparable to the depth of shallow aquifers. The geophysical data and hydrologic information from U.S. Geological Survey and cooperator studies are being used by resource managers to develop groundwater resource plans for the area. In addition, data will be used to refine hydrologic models in western Nebraska.

Open-File Report↗
USGS2011

Moderate-resolution sea surface temperature data for the nearshore North Pacific

Coastal sea surface temperature (SST) is an important environmental characteristic in determining the suitability of habitat for nearshore marine and estuarine organisms. This publication describes and provides access to an easy-to-use coastal SST dataset for ecologists, biogeographers, oceanographers, and other scientists conducting research on nearshore marine habitats or processes. The data cover the Temperate Northern Pacific Ocean as defined by the 'Marine Ecosystems of the World' (MEOW) biogeographic schema developed by The Nature Conservancy. The spatial resolution of the SST data is 4-km grid cells within 20 km of the shore. The data span a 29-year period - from September 1981 to December 2009. These SST data were derived from Advanced Very High Resolution Radiometer (AVHRR) instrument measurements compiled into monthly means as part of the Pathfinder versions 5.0 and 5.1 (PFSST V50 and V51) Project. The processing methods used to transform the data from their native Hierarchical Data Format Scientific Data Set (HDF SDS) to georeferenced, spatial datasets capable of being read into geographic information systems (GIS) software are explained. In addition, links are provided to examples of scripts involved in the data processing steps. The scripts were written in the Python programming language, which is supported by ESRI's ArcGIS version 9 or later. The processed data files are also provided in text (.csv) and Access 2003 Database (.mdb) formats. All data except the raster files include attributes identifying realm, province, and ecoregion as defined by the MEOW classification schema.

Open-File Report↗
USGS2011

Quality assurance and quality control of geochemical data—A primer for the research scientist

Geochemistry is a constantly expanding science. More and more, scientists are employing geochemical tools to help answer questions about the Earth and earth system processes. Scientists may assume that the responsibility of examining and assessing the quality of the geochemical data they generate is not theirs but rather that of the analytical laboratories to which their samples have been submitted. This assumption may be partially based on knowledge about internal and external quality assurance and quality control (QA/QC) programs in which analytical laboratories typically participate. Or there may be a perceived lack of time or resources to adequately examine data quality. Regardless of the reason, the lack of QA/QC protocols can lead to the generation and publication of erroneous data. Because the interpretations drawn from the data are primary products to U.S. Geological Survey (USGS) stakeholders, the consequences of publishing erroneous results can be significant. The principal investigator of a scientific study ultimately is responsible for the quality and interpretation of the project's findings, and thus must also play a role in the understanding, implementation, and presentation of QA/QC information about the data. Although occasionally ignored, QA/QC protocols apply not only to procedures in the laboratory but also in the initial planning of a research study and throughout the life of the project. Many of the tenets of developing a sound QA/QC program or protocols also parallel the core concepts of developing a good study: What is the main objective of the study? Will the methods selected provide data of enough resolution to answer the hypothesis? How should samples be collected? Are there known or unknown artifacts or contamination sources in the sampling and analysis methods? Assessing data quality requires communication between the scientists responsible for designing the study and those collecting samples, analyzing samples, treating data, and interpreting results. This primer has been developed to provide basic information and guidance about developing QA/QC protocols for geochemical studies. It is not intended to be a comprehensive guide but rather an introduction to key concepts tied to a list of relevant references for further reading. The guidelines are presented in stepwise order beginning with presampling considerations and continuing through final data interpretation. The goal of this primer is to outline basic QA/QC practices that scientists can use before, during, and after chemical analysis to ensure the validity of the data they collect with the goal of providing defendable results and conclusions.

Open-File Report↗
USGS2014

Guidelines for the collection of continuous stream water-temperature data in Alaska

Objectives of stream monitoring programs differ considerably among many of the academic, Federal, state, tribal, and non-profit organizations in the state of Alaska. Broad inclusion of stream-temperature monitoring can provide an opportunity for collaboration in the development of a statewide stream-temperature database. Statewide and regional coordination could reduce overall monitoring cost, while providing better analyses at multiple spatial and temporal scales to improve resource decision-making. Increased adoption of standardized protocols and data-quality standards may allow for validation of historical modeling efforts with better projection calibration. For records of stream water temperature to be generally consistent, unbiased, and reproducible, data must be collected and analyzed according to documented protocols. Collection of water-temperature data requires definition of data-quality objectives, good site selection, proper selection of instrumentation, proper installation of sensors, periodic site visits to maintain sensors and download data, pre- and post-deployment verification against an NIST-certified thermometer, potential data corrections, and proper documentation, review, and approval. A study created to develop a quality-assurance project plan, data-quality objectives, and a database management plan that includes procedures for data archiving and dissemination could provide a means to standardize a statewide stream-temperature database in Alaska. Protocols can be modified depending on desired accuracy or specific needs of data collected. This document is intended to guide users in collecting time series water-temperature data in Alaskan streams and draws extensively on the broader protocols already published by the U.S. Geological Survey.

Alaska↗
USGS2015

A case study of data integration for aquatic resources using semantic web technologies

Use cases, information modeling, and linked data techniques are Semantic Web technologies used to develop a prototype system that integrates scientific observations from four independent USGS and cooperator data systems. The techniques were tested with a use case goal of creating a data set for use in exploring potential relationships among freshwater fish populations and environmental factors. The resulting prototype extracts data from the BioData Retrieval System, the Multistate Aquatic Resource Information System, the National Geochemical Survey, and the National Hydrography Dataset. A prototype user interface allows a scientist to select observations from these data systems and combine them into a single data set in RDF format that includes explicitly defined relationships and data definitions. The project was funded by the USGS Community for Data Integration and undertaken by the Community for Data Integration Semantic Web Working Group in order to demonstrate use of Semantic Web technologies by scientists. This allows scientists to simultaneously explore data that are available in multiple, disparate systems beyond those they traditionally have used.

Open-File Report↗
USGS2020

Assessment of existing groundwater quality data in the Green-Duwamish watershed, Washington

The United States Geological Survey (USGS) provided technical support to the Washington Department of Ecology (Ecology) in their assessment of the role groundwater plays in contributing pollutant loading to the Green-Duwamish River near Seattle, Washington. Ecology is developing watershed hydrology models of the Green-Duwamish watershed, and need to assign realistic contaminant concentrations to the various Hydrologic Response Units represented in their models. The USGS compiled existing groundwater quality data in the Green-Duwamish watershed, and this report summarizes results and interpretation of the dataset, including identifying data gaps and needs for further research and monitoring. The sources of existing data were the USGS’s National Water Information System, Ecology’s Environmental Information Management System, and a compilation of several studies by Leidos, a scientific research company. The water-quality parameters of interest included polychlorinated biphenyl (PCB) Aroclors and congeners, phthalates, carcinogenic polycyclic aromatic hydrocarbons (cPAHs), arsenic, copper, and zinc. Results were grouped into the four subwatersheds delineated in Ecology’s hydrology models: Duwamish, Lower Green, Soos, and Upper Green. Results from the Duwamish subwatershed were further sub-divided by the USGS into the Lower Duwamish, containing land adjacent to the Lower Duwamish Waterway Superfund site, and the Upper Duwamish, containing the remaining area of the Duwamish subwatershed. Groundwater quality data in the Lower Duwamish were treated separately because there is known contamination in this area. The availability of water quality data varied by subwatershed as follows: phthalate data was only available within the Duwamish, PCB data was available within the Duwamish and Lower Green, cPAH data was available within the Duwamish, Lower Green, and Soos, and data for arsenic, copper, and zinc were available within all four subwatersheds. More than 99 percent of the available data was within the Duwamish subwatershed, identifying a need for additional monitoring of groundwater quality in the other subwatersheds.

Washington↗
USGS2020

Envisioning a multi-agency and multi-academic institution geomorphology data exchange portal

Access to bathymetry and geomorphology data for rivers and reservoirs is a critical need in multiple agencies and academia. These data are needed to make water-resource-management decisions regarding river restoration, resource protection, infrastructure design and sustainability, and flood-risk reduction, and during natural disasters. Sharing of data increases decision-making capacity by incorporating information from entire watersheds, provides knowledge from similar settings being managed or studied by other entities, and helps meet the goals of the Federal Open Water Data Initiative. Addressing these needs across broad spatial and temporal scales would be made more efficient if these data were available in consistent formats with standardized metadata and were either stored in a centralized database or integrated with existing geospatial datasets. Because of renewed interest and technological advances, representatives from multiple Federal agencies and academic institutions have created a new working group to scope the development of a Geomorphology Data Exchange Portal to increase access to needed data. The working group has developed a vision for the Portal and outlined possible approaches to achieve the vision. Short-term approaches may include leveraging existing data-access portals and data-processing tools and integrating geomorphology data with existing national geospatial datasets.

Open-File Report↗
USGS2025

The feasibility of using lidar-derived digital elevation models for gravity data reduction

Gravity data require submeter elevation accuracy for data processing, and differential global navigation satellite system (dGNSS) equipment is commonly used to acquire three-dimensional positional data to achieve such accuracy. However, lidar (light detection and ranging) data are commonly used to develop digital elevation models (DEMs) of Earth’s surface. Therefore, using elevations from lidar-derived DEMs for gravity-data acquisition and reduction may improve field efficiency and reduce cost. This study examines the feasibility of using DEMs for gravity-data reduction by comparing dGNSS elevation data from 435 gravity stations in Michigan, Wyoming, and Colorado with their respective DEM elevations. The results show that the average difference between DEM and dGNSS elevations is 13 centimeters (cm) and that 93 percent of those differences are less than 50 cm, even in areas with steep terrain. Because an elevation discrepancy of 50 cm corresponds to an error of roughly 0.1 milligals (mGal) in the simple Bouguer gravity anomaly, the results suggest that lidar-derived DEMs are a viable source for acquiring the elevation data needed to process gravity data, thus improving both the cost and efficiency of data collection for regional surveys where an accuracy of less than 1.0 mGal is desired.

Open-File Report↗
USGS1975

Water-quality data from oil and gas wells in part of the Permian Basin, southeastern New Mexico and western Texas

Approximately 8,000 chemical analyses of water produced from formations of several geologic ages in south eastern New Mexico and western Texas are tabulated by both geographic location and geologic formation. Empirical and mathematical relationships between (1) the dissolved solids and the measured and computed resistivity of water, the chloride-ion concentration and the density, and (2) the concentration of chloride-ion and the density and the resistivity of water, were established. Resistivities of water computed following a method developed by Moore, Szasz, and Whitney (1966) using the concentration of the six most common constituents dissolved in natural water correlate favorably with the measured resistivities of natural water. The water analyses were obtained chiefly from oil companies and oil-service companies operating in the western part of the Permian basin. The data were associated with the proper well by searching location, operator, and reference number cross indexes prepared from the Permian Basin Well Data System files. The cross indexes were determined to be essential to efficient data processing operations. After preliminary screening for nonrepresentative data, all data were indexed to the Permian Basin Well Data System magnetic tape file scout records by the unique reference number. The data were then coded, punched into tabulating cards, and stored on magnetic tape for computer operations. Data verification steps not normally required when using data received from a laboratory following standardized analytical techniques on samples obtained under standardized and controlled procedures were performed in order to upgrade reliability of the information. Data errors detected included poorly located or identified samples; mistakes including reproducing, or key punching; laboratory errors; inconsistent reporting; and nonrepresentative or contaminated samples.

New Mexico, Texas↗
USGS1982

GLORIA sidescan and seismic data collected by the DESV STARELLA along the continental slope and upper continental rise of the Eastern United States in 1979

A cruise on the- DESV STARELLA was conducted between October 23. 1979, and November 8, 1979, by the U.S. Geologic.al Survey (USGS) in cooperation with the United Kingdom's Institute of Oceanographic Sciences (IOS). The purpose of the study was to gain an overview of the morphology of large areas of the Continental Slope and upper Continental Rise off the eastern ·united States. Sidescan-sonar and single-channel seismic-reflection data were collected along the tracklines. The ship's position. was monitored using LORAN_C and satellite navigation techniques. The sidescan data were collected using the !OS-developed Geologic Long­-Range Inclined Asdic, Mark II (GLORIA II) system. GLORIA was operated at either a 20-second or 40-second sweep, giving maximum slant-range distances of 15 or 30 kilometers, respectively, to each side of the towed fish. The sidescan data were collected on graphic recorders and analog tapes. The tapes were played onto photographic paper in a facsimile machine; then these prints were photographically stretched to produce approximately isometric images .. The images were not corrected for slant-range distortion. Mosaics at a scale of 1:250,000 (Mercator projection) were made from the photographic images. The seismic· data consist of 40-in 3 airgun and 10-kHz echo-sounder profiles. The airgun data were recorded on EPC recorders at both 8- and 4- second sweep rates. The 10-kHz echo-sounder data were recorded on a wet-paper recorder at a 2-second sweep rate. Approximately 4,820 km of seismic and sonar-data wera collected from four areas of interest and along the lines connecting those areas. Area 1 includes the Continental Slope and upper Rise seaward of Georges Bank, between Northeast Channel and Alvin Canyon. Numerous lines were run here, resulting in approximately 2,500 km of seismic data and complete and overlapping GLORIA coverage of the area. A similar survey, consisting of approximately 1 2 200 km of trackline, was run in area 2, which includes the Continental Slope and upper Rise seaward of the middle Atlantic states between Hudson Canyon and Baltimore Canyon. A single line, 250 km long, was run through area 3 along the base of the Continental Slope from Cape Hatteras to latitude 33°N. off North and South Carolina. Two parallel lines, totaling 870 km, were run through area 4 along the Blake Escarpment, from the Blake Spur south to latitude 27°40'N. One line was run along the top of the escarpment and the other was run along the base of the escarpment. All the data can be studied at the U.S. Geological Survey offices in Woods Hole, MA 02543. Microfilm copies of the sidescan-monitor record as well as the airgun and 10-kHz profiles can be purchased only from the National Geophysical Data Center, NOAA, Code E64, 325 Broadway, Boulder, CO 80303 (303/497-6338). Photographic copies of the GLORIA mosaics can also be obtained only from this address.

Open-File Report↗