Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources
USGS2004

The 87Sr/86Sr ratios of lacustrine carbonates and lake-level history of the Bonneville paleolake system

Lakes in the Bonneville basin have fluctuated dramatically in response to changes in rainfall, temperature, and drainage diversion during the Quaternary. We analyzed tufas and shells from shorelines of known ages in order to develop a relation between 87Sr/86Sr ratio of carbonates and lake level, which then can be used as a basis for constraining lake level from similar analyses on carbonates in cores. Carbonates from the late Quaternary shorelines yield the following average 87Sr/86Sr ratios: 0.71173 for the Stansbury shoreline (22-20 14C ka; 1350 m), 0.71153 for the Bonneville shoreline (15.5-14.5 14C ka; 1550 m), 0.71175 for the Provo shoreline (14.4-14.0 14C ka; 1450 m), 0.71244 for the Gilbert shoreline (???10.3-10.9 14C ka; 1300 m), and 0.71469 for the modern Great Salt Lake (1280 m). These analyses show that the 87Sr/86Sr ratio of lacustrine carbonates changes substantially at low- to mid-lake levels but is invariant at mid- to high-lake levels. Sr-isotope mixing models of Great Salt Lake and the Bonneville paleolake system were constructed to explain these variations in 87Sr/86Sr ratios with change in lake level. Our model of the Bonneville system produced a 87Sr/86Sr ratio of 0.71193, very close to the observed ratios from high-shoreline tufa and shell. The model verifies that the integration of the southern Sevier and Beaver rivers with the Bear and others rivers in the north is responsible for the lower 87Sr/86Sr ratios in Lake Bonneville compared to the modern Great Salt Lake. We also modeled the 87Sr/86Sr ratio of Lake Bonneville with the upper Bear River diverted into the Snake River basin and obtained an 87Sr/86Sr ratio of 0.71414. Coincidentally, this ratio is close to the observed ratio for Great Salt Lake of 0.71469. This means that 87Sr/86Sr ratios of >0.714 for carbonate can be produced by climatically induced low-lake conditions or by diversion of the upper Bear River out of the Bonneville basin. This model result also demonstrates that the upper Bear River had to be flowing into the Bonneville basin during highstands of other late Quaternary lake cycles: carbonates from the Little Valley (130-160 ka) and Cutler Dam (59 ?? 5 ka) lake cycles returned 87Sr/86Sr ratios of 0.71166 and 0.71207, respectively, and are too low to be produced by a lake without the upper Bear River input. ?? 2004 Geological Society of America.

Geological Society of America Bulletin↗
USGS1976

Man against volcano: The eruption on Heimaey, Vestmann Islands, Iceland

The U.S. Geological Survey carries out scientific studies in the geological, hydrological, and cartographic sciences generally within the 50 states, but also in cooperation with scientific organizations in many foreign countries for the investigation of unusual earth science phenomena throughout the world. The following material discusses the impact of the 1973 volcanic eruption of Eldfell on the fishing port of Vestmannaeyjar on the island of Heimaey, Iceland. Before the eruption was over, approximately one-third of the town of Vestmannaeyjar had been obliterated but, more importantly, the potential damage had been reduced markedly by the spraying of seawater onto the advancing lava flows, causing them to be slowed, stopped, or diverted from the undamaged portion of the town. The Survey's interest and involvement in the Heimaey eruption in Iceland was occasioned by the possibility that the procedures used to control the course of the flowing lava and to reduce the damage in a modern town may some day be needed in Hawaii and possibly even in the continental United States. This publication is based on the observations of two USGS geologists, Richard S. Williams, Jr. and James G. Moore, as well as on information from the Icelandic Ministry for Foreign Affairs, Icelandic scientists' reports through the Center for Short-Lived Phenomena, and other published scientific reports. A number of Icelandic scientists studied the scientific aspects of the eruption and the engineering aspects of the control of lava flows, in particular, Professors Thorbjb'rn Sigurgeirsson and Sigurdur Thorarinsson of the University of Iceland Science Institute. Also, Icelandic governmental officials provided logistical and other support, in particular, Mr. Steingnmur Hermannsson, Director, Icelandic National Research Council and Professor Magnus Magnusson, Director, University of Iceland Science Institute.

Vestmannaeyjar↗
USGS2026

Artificial intelligence strategy for the U.S. Geological Survey

Artificial intelligence (AI) can offer opportunities to enhance the science, science delivery, and business operations of the U.S. Geological Survey (USGS). Although USGS staff have proactively adopted AI into our workflows for many years, a comprehensive USGS strategy for AI has not previously been developed. The strategy described here is motivated by the acceleration of AI technological development, the benefits of increased AI adoption to USGS mission delivery as anticipated by USGS staff, rising public concern about the implications and trustworthiness of AI, and emerging Federal directives and guidance about AI. The USGS vision is to continue integrating AI to deliver valuable science for the public good while maintaining high ethical standards, scientific quality and integrity, and compliance with Federal and U.S. Department of the Interior requirements. To realize this vision, the USGS can take steps to (1) develop a strong AI workforce, (2) adapt our organizational approaches to include AI governance and communication, (3) ensure responsible and trustworthy use of AI, (4) modernize our computing and data infrastructure to support AI, and (5) accelerate AI adoption and innovation in the Bureau.

Circular↗
USGS2017

Antimony

Antimony is an important mineral commodity used widely in modern industrialized societies. The element imparts strength, hardness, and corrosion resistance to alloys that are used in many areas of industry, including in lead-acid storage batteries. Antimony’s leading use is as a fire retardant in safety equipment and in household goods, such as mattresses. The U.S. Government has considered antimony to be a critical mineral mainly because of its use in military applications. The great majority of the world’s antimony comes from China, and much of the remainder is shipped to China for smelting. Antimony resources are unevenly distributed around the world. China has the bulk of the world’s identified resources; other countries that have identified antimony resources include Bolivia, Canada, Mexico, Russia, South Africa, Tajikistan, and Turkey. Resources in the United States are located mainly in Alaska, Idaho, Montana, and Nevada. The most significant antimony mineral deposits occur in geologic environments with a thick sequence of siliciclastic sedimentary rocks in areas with significant fault and fracture systems. The most common antimony ore mineral is stibnite (Sb2 S3 ), but more than 100 other minerals also contain antimony. The presence of antimony in surface waters and groundwaters results primarily from rock weathering, soil runoff, and anthropogenic sources. Global emissions of antimony to the atmosphere average 6,100 metric tons per year. Empirical data suggest that the acid-generating potential of antimony mine waste is low.

Professional Paper↗
USGS1964

Geology and ground-water conditions in the Wilmington-Reading area, Massachusetts

The Wilmington-Reading area, as defined for this report, contains the headwaters of the Ipswich River in northeastern Massachusetts. Since World War II the growth of communities in this area and the change in character of some of them from rural to suburban have created new water problems and intensified old ones. The purpose of this report on ground-water conditions is to provide information that will aid in understanding and resolving some of these problems. The regional climate, which is humid and temperate, assures the area an ample natural supply of water. At the current stage of water-resources development a large surplus of water drains from the area by way of the Ipswich River during late autumn, winter, and spring each year and is unavailable for use during summer and early autumn, when during some years there is a general water deficiency. Ground water occurs both in bedrock and in the overlying deposits of glacial drift. The bedrock is a source of small but generally reliable supplies of water throughout the area. Glacial till also is a source of small supplies of water, but wells in till often fail to meet modern demands. Stratified glacial drift, including ice-contact deposits and outwash, yields small to large supplies of water. Stratified glacial drift forms the principal ground-water reservoir. It partly fills a system of preglacial valleys corresponding roughly to the valleys of the present Ipswich River system and is more than 100 feet thick at places. The ice-contact deposits generally are more permeable than the outwash deposits. Ground water occurs basically under water-table conditions. Recharge in the Wilmington-Reading area is derived principally from precipitation on outcrop areas of ice-contact deposits and outwash during late autumn, winter. and spring. It is estimated that the net annual recharge averages about 10 inches and generally ranges from 5 inches during unusually dry years to 15 inches during unusually wet years. Ground water withdrawn largely by municipal wells supplies the towns of North Reading, Reading, and Wilmington. In 1957 the average daily withdrawal from these wells was about 2.5 million gallons, of which about half was used outside the Ipswich River drainage basin. The chemical quality of the ground water is generally satisfactory except for local excessive concentrations of iron. The storage capacity of the ground-water reservoir and recharge in the Wilmington-Reading area are large enough to sustain a total withdrawal of ground water at several times the current rate, but the use of the reservoir probably will be limited by the extent to which wells of moderate or large capacity can be dispersed. This will depend upon the distribution of areas of thick permeable materials. Conditions in the Martins Brook-Skug River drainage basin seem generally favorable for increased development of water supplies. In the rest of the Wilmington-Reading area the chances of finding substantial bodies of thick permeable materials probably are small, but further exploration is desirable. Measures proposed to drain swampland by deepening and straightening the Ipswich River and its tributaries will have some effect upon the ground-water conditions. Probably the most obvious effect will be a lowering of water levels in wells near improved reaches of channel. Also important will b the effect of changes in low streamflow conditions on wells that induce infiltration from streams and the effect on well yields of an improved hydraulic connection between streams and the ground-water body. The Reading 100-acre well field, which derives part of its supply by inducing recharge from the Ipswich River, would be affected by the drainage measures. During a dry summer, such as that of 1957, the flow of the Ipswich is fully diverted by pumping at this well field, and drawdowns at some of the wells approach half the saturated thickness of the aquifer there. If the drainage measures are

Water Supply Paper↗
USGS2017

Titanium

Titanium is a mineral commodity that is essential to the smooth functioning of modern industrial economies. Most of the titanium produced is refined into titanium dioxide, which has a high refractive index and is thus able to impart a durable white color to paint, paper, plastic, rubber, and wallboard. Because of their high strength-to-weight ratio and corrosion resistance, titanium metal and titanium metal alloys are used in the aerospace industry as well as for welding rod coatings, biological implants, and consumer goods. Ilmenite and rutile are currently the principal titanium-bearing ore minerals, although other minerals, including anatase, perovskite, and titanomagnetite, could have economic importance in the future. Ilmenite is currently being mined from two large magmatic deposits hosted in rocks of Proterozoic-age anorthosite plutonic suites. Most rutile and nearly one-half of the ilmenite produced are from heavy-mineral alluvial, fluvial, and eolian deposits. Titanium-bearing minerals occur in diverse geologic settings, but many of the known deposits are currently subeconomic for titanium because of complications related to the mineralogy or because of the presence of trace contaminants that can compromise the pigment production process. Global production of titanium minerals is currently dominated by Australia, Canada, Norway, and South Africa; additional amounts are produced in Brazil, India, Madagascar, Mozambique, Sierra Leone, and Sri Lanka. The United States accounts for about 4 percent of the total world production of titanium minerals and is heavily dependent on imports of titanium mineral concentrates to meet its domestic needs. Titanium occurs only in silicate or oxide minerals and never in sulfide minerals. Environmental considerations for titanium mining are related to waste rock disposal and the impact of trace constituents on water quality. Because titanium is generally inert in the environment, human health risks from titanium and titanium mining are minimal; however, the processes required to extract titanium from titanium feedstock can produce industrial waste.

Professional Paper↗
USGS2024

Discerning sediment provenance in the Outer Banks (USA) through detrital zircon geochronology

Detrital zircon data from modern barrier island and estuarine environments in the Outer Banks (Atlantic Coast, USA) were statistically compared to sands from nearby rivers to assist in determining source-to-sink pathways. Fluvial samples, collected from near the Fall Line contact between the Appalachian Orogen and sediments of the coastal plain, all have age unique distributions, making them ideal for tracing provenance. Three samples from the Atlantic foreshore showed high similarities to one another, as well as to three samples from the estuarine (back-barrier) Pamlico and Albemarle Sounds. Mixture modeling with multiple data reduction methods and three different statistical tests for similarity consistently indicated that the nearby Potomac River was the primary source for all Atlantic foreshore and estuarine zircons, followed by minor contributions from the James River in some models. The models indicate little or no sediment contribution from the Susquehanna, Roanoke, Tar, Neuse, Cape Fear, and Peedee Rivers. Both Atlantic foreshore and estuarine sands are therefore interpreted to have initially originated from Appalachian bedrock to the north of their present-day location, and subsequently to have been transported southward through the Chesapeake Bay watershed before deposition in Virginia and North Carolina. Prior to barrier island formation in the last several thousand years, differing geomorphology of the Chesapeake Bay facilitated southward movement of sediments from its constituent rivers via longshore drift, where they were deposited in coastal settings on the mainland. The modern barrier islands, formed during the most recent post-glacial transgression, may be reworked from these deposits, but may also include a contribution from sediments that were derived more recently from relict deposits on the shelf. Oceanographic and sedimentological evidence suggests that movement of sand-sized grains from southern rivers across the back-barrier sounds is unlikely. These findings can assist with coastal resilience planning and resource management in a region under severe threat from climate change and rising sea levels.

North Carolina, Virgina↗
USGS2010

Recent U.S. Geological Survey Studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada-Results of a 5-Year Project

This report presents summary papers of work conducted between 2002 and 2007 under a 5-year project effort funded by the U.S. Geological Survey Mineral Resources Program, formerly entitled 'Tintina Metallogenic Province: Integrated Studies on Geologic Framework, Mineral Resources, and Environmental Signatures.' As the project progressed, the informal title changed from 'Tintina Metallogenic Province' project to 'Tintina Gold Province' project, the latter being more closely aligned with the terminology used by the mineral industry. As Goldfarb and others explain in the first chapter of this report, the Tintina Gold Province is a convenient term used by the mineral exploration community for a 'region of very varied geology, gold deposit types, and resource potential'. The Tintina Gold Province encompasses roughly 150,000 square kilometers, bounded by the Kaltag-Tintina fault system on the north and the Farewell-Denali fault system on the south. It extends westward in a broad arc, some 200 km wide, from northernmost British Columbia, through the Yukon, through southeastern and central Alaska, to southwestern Alaska. The climate is subarctic and, in Alaska, includes major physiographic delineations and ecoregions such as the Yukon-Tanana Upland, Tanana-Kuskokwim Lowlands, Yukon River Lowlands, and the Kuskokwim Mountains. Although the Tintina Gold Province is historically important for some of the very first placer and lode gold discoveries in northern North America, it has recently seen resurgence in mineral exploration, development, and mining activity. This resurgence is due to both new discoveries (for example, Pogo and Donlin Creek) and to the application of modern extraction methods to previously known, but economically restrictive, low-grade, bulk-tonnage gold resources (for example, Fort Knox, Clear Creek, and Scheelite Dome). In addition, the Tintina Gold Province hosts numerous other mineral deposit types, possessing both high and low sulfide content, which are not currently in development.

Scientific Investigations Report↗
USGS1978

Geologic framework of lower Cook Inlet, Alaska

Three seismic reflectors are present throughout the lower Cook Inlet basin and can be correlated with onshore geologic features. The reflections come from unconformities at the base of the Tertiary sequence, at the base of Upper Cretaceous rocks, and near the base of Upper Jurassic strata. A contour map of the deepest horizon shows that Mesozoic rocks are formed into a northeast-trending syncline. Along the southeast flank of the basin, the northwest-dipping Mesozoic rocks are truncated at the base of Tertiary rocks. The Augustine-Seldovia arch trends across the basin axis between Augustine Island and Seldovia. Tertiary rocks thin onto the arch from the north and south. Numerous anticlines, smaller in structural relief and breadth than the Augustine-Seldovia arch, trend northeast parallel with the basin, and intersect the arch at oblique angles. The stratigraphic record shows four cycles of sedimentation and tectonism that are bounded by three regional unconformities in lower Cook Inlet and by four thrust faults and the modern Benioff zone in flysch rocks of the Kenai Peninsula and the Gulf of Alaska. The four cycles of sedimentation are, from oldest to youngest, the early Mesozoic, late Mesozoic, early Cenozoic, and late Cenozoic. Data on organic geochemistry of the rocks from one well suggest that Middle Jurassic strata may be a source of hydrocarbons. Seismic data show that structural traps are formed by northeast-trending anticlines and by structures formed at the intersections of these anticlines with the transbasin arch. Stratigraphic traps may be formed beneath the unconformity at the base of Tertiary strata and beneath unconformities within Mesozoic strata.

Alaska↗
USGS2016

Geology and undiscovered resource assessment of the potash-bearing Central Asia Salt Basin, Turkmenistan, Uzbekistan, Tajikistan, and Afghanistan: Chapter AA in Global mineral resource assessment

Undiscovered potash resources in the Central Asia Salt Basin (CASB) of Turkmenistan, Uzbekistan, Tajikistan, and Afghanistan were assessed as part of a global mineral resource assessment led by the U.S. Geological Survey. The term “potash” refers to potassium-bearing, water-soluble salts derived from evaporite basins, where seawater dried up and precipitated various salt compounds; the word for the element “potassium” is derived from potash. Potash is produced worldwide at amounts exceeding 30 million metric tons per year, mostly for use in fertilizers. The term “potash” is used by industry to refer to potassium chloride, as well as potassium in sulfate, nitrate, and oxide forms. For the purposes of this assessment, the term “potash” refers to potassium ores and minerals and potash ore grades. Resource and production values are usually expressed by industry in terms of K 2 O (potassium oxide) or muriate of potash (KCl, potassium chloride). The CASB hosts significant discovered potash resources and originated in an inland sea during Late Jurassic time. Seawater flowed into the CASB, mostly from its extreme northwestern margin near the modern Caspian Sea, during several evaporation episodes that deposited at least five different packages of evaporites, with virtually all potash in the second and fourth packages. In this study, the CASB was subdivided into three tracts (permissive areas) for evaluation: the Amu Darya tract in the west, the Gissar tract in the center, and the Afghan-Tajik tract in the east. The Gissar and Amu Darya tracts were quantitatively assessed, whereas the Afghan‑Tajik tract was only qualitatively assessed because of the commonly extreme depth (as deep as 7 km) of the Jurassic salt, extensive deformation, and a lack of known potash deposits. Two approaches were used to estimate amounts of undiscovered potash in the CASB. Stratabound evaporite deposits in the Amu Darya tract were evaluated using an Adaptive Geometric Estimation (AGE) approach, which estimates in-place potash volumes and tonnages. The Gissar tract was evaluated by using the AGE approach for stratabound deposits and the three-part form of assessment of Singer and Menzie (2005) for discrete halokinetic deposits. In the three-part form of assessment, numbers of undiscovered deposits were estimated and combined with grade and tonnage models to probabilistically forecast the amount of undiscovered potash. The Amu Darya tract is estimated to contain 38 billion metric tons of undiscovered potash as K 2 O by using the AGE approach for stratabound deposits. The hybrid stratabound-halokinetic Gissar tract is estimated to contain between 1 and 16 billion metric tons of undiscovered potash as K 2 O. Chapter 1 of this report provides an overview of the history of the CASB and summarizes evaporite potash deposition, halokinesis, and dissolution processes that have affected the current distribution of potash-bearing salt in the CASB. Chapter 2 describes the Gissar tract, an uplifted region that contains a mix of stratabound and halokinetic potash deposits and all of the discovered and exploited potash deposits of the CASB. Chapter 3 describes the Amu Darya tract, where evaporite deposits remain flat-lying and undeformed since their original deposition. Chapter 4 describes the highly deformed and compressed Afghan-Tajik tract and what is known of the deeply-buried Jurassic salt. Chapter 5 describes the spatial databases included with this report, which contain a collection of CASB potash information. Appendixes A and B summarize descriptive models for stratabound and halokinetic potash-bearing salt deposits, respectively. Appendix C summarizes the AGE method used to evaluate the Gissar and Amu Darya tracts. Appendixes D and E contain grade and thickness data for the Gissar and Amu Darya tracts. Appendix F provides the SYSTAT script used to estimate undiscovered K2 O in a CASB tract. Appendix G provides a potash glossary, and appendix H provides biographies of assessment participants.

Scientific Investigations Report↗
USGS2025

East Greenland Ice Sheet retreat history from Scoresby Sund and Storstrømmen Glacier during the last deglaciation

The lack of geological constraints on past ice-sheet change in marine-based sectors of the Greenland Ice Sheet (GrIS) following the Last Glacial Maximum limits our ability to assess (1) the drivers of ice-sheet change, and (2) the performance of ice-sheet models that are benchmarked against the paleo-record of GrIS change. Here, we provide new in situ 10 Be surface exposure chronologies of ice-sheet margin retreat from the outer Scoresby Sund and Storstrømmen Glacier regions in eastern and northeastern Greenland, respectively. Ice retreated from Rathbone Island, east of Scoresby Sund, by ∼ 14.1 ka, recording some of the earliest documentations of terrestrial deglaciation in Greenland. The mouth of Scoresby Sund deglaciated by ∼ 13.2 ka, and retreated at an average rate of ∼ 43 m yr −1 between 13.2 and 9.7 ka. Storstrømmen Glacier retreated from the outer coast to within ∼ 3 km of the modern ice margin between ∼ 12.7 and 8.6 ka at an average rate of ∼ 28 m yr −1 . Retreat then slowed or reached a stillstand as ice retreated ∼ 3 km between ∼ 8.6 ka to the modern ice margin at ∼ 8.0 ka. These retreat rates are consistent with late glacial and Holocene estimates for marine-terminating outlet glaciers across East Greenland, and comparable to modern retreat rates observed at the largest ice streams in northeastern, and northwestern Greenland.

Scoresby Sund, Storstrømmen Glacier↗
USGS1978

Heavy-mineral variability in the Baltimore Canyon trough area

Petrographic analyses of bottom sediments from 87 stations within a relatively large subarea (1700 square kilometers) define the local variability and the distributional processes of heavy minerals in the Baltimore Canyon Trough area (13500km 2 ). Of the 29 mineral groups that were identified, those most diagnostic of differences between stations were opaque minerals, garnet, hornblende, orthopyroxene, other amphiboles, and staurolite. Some of the common components cannot be used to define areal trends. The association of minerals by their specific gravities reflects the modern reworking and sorting of sediments in this area. The poor correlation between mineral abundance and the ridge-and trough topography suggests either that our analyses and samples did not resolve bathymetrically induced changes or that smaller bed forms (such as ripples) largely control the heavy-mineral distribution. Data from this study provide a baseline for evaluating manmade disturbances of the bottom sediments and show that relatively large changes in the heavy mineral composition can take place over small distances on this part of the Continental Shelf.

Baltimore Canyon Trough↗
USGS2026

Rapid characterization of the 2025 Mw 8.8 Kamchatka, Russia earthquake

The 29 July 2025 M w 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near‐source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real‐time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite‐fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The M w 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.

Kuril-Kamchatka subduction zone↗
USGS2019

Heat flow in the Western Arctic Ocean (Amerasian Basin)

From 1963 to 1973 the U.S. Geological Survey (USGS) measured heat flow at 356 sites in the Amerasian Basin (Western Arctic Ocean) from a drifting ice island (T-3). The resulting measurements, which are unevenly distributed on Alpha-Mendeleev Ridge (AMR) and in Canada and Nautilus basins, greatly expand available heat flow data for the Arctic Ocean. Average T-3 heat flow is ~54.7 ± 11.3 mW m-2, and Nautilus Basin, including Mendeleev Plain, is the only well-surveyed area (~13% of data) with significantly higher average heat flow (63.8 mW m-2). Heat flow and bathymetry are not correlated at a large scale, and turbiditic surficial sediments (Canada and Nautilus basins) have higher heat flow than the sediments that blanket the AMR. Thermal gradients are mostly near-linear, implying that conductive heat transport dominates and that near-seafloor sediments are in thermal equilibrium with overlying bottom waters. Combining the heat flow data with modern seismic imagery suggests that some of the observed heat flow variability may be explained by local changes in sediment thickness or lithology or the presence of basement faults that channel circulating seawater. A thermal model that incorporates thermal conductivity variations along a profile from Canada Basin (thick sediment on mostly oceanic crust) to Alpha Ridge (thin sediment over thick magmatic units associated with the High Arctic Large Igneous Province) predicts heat flow lower than that observed on Alpha Ridge. This, along with other observations, implies that circulating fluids modulate conductive heat flow and contribute to high variability in the T-3 dataset. .

Journal of Geophysical Research B: Solid Earth↗
USGS1971

Tertiary limestone aquifer system in the southeastern states

The hydrogeologic history of the Tertiary limestone system of the Southeastern States is reconstructed, especially as it relates to circulation of ground water and the development of solution cavities. The development of these solution cavities resembles in many respects the development of cavities in carbonates of the Knox Group of Tennessee during Middle Ordovician time, the cavities in the Knox having since been filled with collapse breccia that has been recemented. Some general principles of the circulation of water in limestone terranes and the related development of solution openings are reviewed so that a generic basis for comparison can be made of the modern southeast carbonate setting with the Ordovician carbonate setting in Tennessee.The major requirements for solutional development as cavities--(1) presence of highly soluble material, (2) a fracture system or some other form of incipient permeability, (3) water undersaturated with respect to soluble rocks, such as recharge from precipitation, and (4) hydraulic gradient--are found in the Tertiary limestone terrane of the southeast; much of the limestone has been elevated above sea level as a homoclinal seaward-dipping unit. Such a broad homoclinal setting, which also existed in the Knox at the close of early Ordovician time, facilitates extensive solutional development in the upper part of the zone of saturation. Circulation of water great enough to form a significant cavern network requires concentrated discharge areas, commonly as entrenched permanent streams or near-shore springs and seepage. This condition prevails where the Tertiary limestone is fairly close to land surface.Reconstruction of the geologic and hydrogeologic history of a carbonate region generally reveals the extent of early solution and karst development in relation to current karstification. Caverns, partly filled in some cases with loose or poorly cemented rock fragments that have fallen from cavern roofs, give evidence of karstification that is either current or that probably developed since the last marine inundation of the carbonate terrane. On the other hand, filling of caverns with overlying rock debris and reconstituting the debris into breccia are conditions that require evaluation of paleohydrology.

Alabama, Georgia, Florida, North Carolina, South C↗
USGS2004

Assessment of soil and water contaminants from selected locations in and near the Idaho Army National Guard Orchard Training Area, Ada County, Idaho, 2001-2003

In 2001, the National Guard Bureau and the U.S. Geological Survey began a project to compile hydrogeologic data and determine presence or absence of soil, surface-water, and ground-water contamination at the Idaho Army National Guard Orchard Training Area in southwestern Idaho. Between June 2002 and April 2003, a total of 114 soil, surface-water, ground-water, precipitation, or dust samples were collected from 68 sample sites (65 different locations) in the Orchard Training Area (OTA) or along the vehicle corridor to the OTA. Soil and water samples were analyzed for concentrations of selected total trace metals, major ions, nutrients, explosive compounds, semivolatile organics, and petroleum hydrocarbons. Water samples also were analyzed for concentrations of selected dissolved trace metals and major ions. Distinguishing naturally occurring large concentrations of trace metals, major ions, and nutrients from contamination related to land and water uses at the OTA was difficult. There were no historical analyses for this area to compare with modern data, and although samples were collected from 65 locations in and near the OTA, sampled areas represented only a small part of the complex OTA land-use areas and soil types. For naturally occurring compounds, several assumptions were made?anomalously large concentrations, when tied to known land uses, may indicate presence of contamination; naturally occurring concentrations cannot be separated from contamination concentrations in mid- and lower ranges of data; and smallest concentrations may represent the lowest naturally occurring range of concentrations and (or) the absence of contaminants related to land and water uses. Presence of explosive, semivolatile organic (SVOC), and petroleum hydrocarbon compounds in samples indicates contamination from land and water uses. In areas along the vehicle corridor and major access roads within the OTA, most trace metal, major ion, and nutrient concentrations in soil samples were not in the upper 10th percentile of data, but concentrations of 25 metals, ions, or nutrients were in the upper 10th percentile in a puddle sample near the heavy equipment maneuvering area, MPRC-H. The largest concentrations of tin, ammonia, and nitrite plus nitrate (as nitrogen) in water from the OTA were detected in a sample from this puddle. Petroleum hydrocarbons were the most common contaminant, detected in all soil and surface-water samples. An SVOC, bis (2-ethylhexyl) phthalate, a plasticizer, was detected at a site along the vehicle corridor. In Maneuver Areas within the OTA, many soil samples contained at least one trace metal, major ion, or nutrient in the upper 10th percentile of data, and the largest concentrations of cobalt, iron, mercury, titanium, sodium, ammonia, or total phosphorus were detected in 6 of 13 soil samples outside the Tadpole Lake area. The largest concentrations of aluminum, arsenic, beryllium, nickel, selenium, silver, strontium, thallium, vanadium, chloride, potassium, sulfate, and nitrite plus nitrate were detected in soil samples from the Tadpole Lake area. Water from Tadpole Lake contained the largest total concentrations of 19 trace metals, 4 major ions, and 1 nutrient. Petroleum hydrocarbons were detected in 5 soil samples and water from Tadpole Lake. SVOCs related to combustion of fuel or plasticizers were detected in 1 soil sample. Explosive compounds were detected in 1 precipitation sample.In the Impact Area within the OTA, most soil samples contained at least one trace metal, major ion, or nutrient in the upper 10th percentile of data, and the largest concentrations of barium, chromium, copper, manganese, lead, or orthophosphate were detected in 6 of the 18 soil samples. Petroleum hydrocarbons were detected in 4 soil samples, SVOCs in 6 samples, and explosive compounds in 4 samples. In the mobilization and training equipment site (MATES) compound adjacent to the OTA, all soil and water samples contained at lea

Scientific Investigations Report↗
USGS1991

Late quaternary geologic framework, north-central Gulf of Mexico

The geologic framework of the north-central Gulf of Mexico shelf is composed of multiple, stacked, delta systems. Shelf and nearshore sedimentary facies were deposited by deltaic progradation, followed by shoreface erosion and submergence. A variety of sedimentary facies has been identified, including prodelta, delta fringe, distributary, lagoonal, barrier island, and shelf sand sheet. This study is based on the interpretation and the synthesis of > 6,700 km of high-resolution seismic profiles, 75 grab samples, and 77 vibracores. The nearshore morphology, shallow stratigraphy, and sediment distribution of the eastern Louisiana shelf are the products of transgressive sedimentary processes reworking the abandoned St. Bernard delta complex. Relatively recent Mississippi delta lobe consists primarily of fine sand, silt, and clay. In the southern portion of the St. Bernard delta complex, asymmetrical sand ridges (>5 m relief) have formed as the result of marine reworking of distributary mouth-bar sands. Silty sediments from the modern Mississippi Birdsfoot delta onlap the St. Bernard delta complex along the southern edge. The distal margin of the St. Bernard complex is distinct and has a sharp contact on the north near the Mississippi Sound barrier island coastline and a late Wisconsinan delta to the south. The Chandeleur Islands and the barrier islands of Mississippi Sound have been formed by a combination of Holocene and Pleistocene fluvial processes, shoreface erosion, and ravinement of the exposed shelf. Sediments underlying the relatively thin Holocene sediment cover are relict fluvial sands, deposited during the late Wisconsinan lowstand. Subsequent relative sea-level rise allowed marine processes to rework and redistribute sediments that formed the nearshore fine-grained facies and the shelf sand sheet.

Conference Paper↗
USGS1989

Morphology and stratigraphy of small barrier-lagoon systems in Maine

The coast of Maine contains over 200 individual barrier-lagoon systems, most quite small, with an aggregate length of nearly 100 km. Although they represent less than 5% of the tidally influenced coastline of Maine, they are widely distributed and occur in a variety of dynamic regimes and physiographic regions. Their morphology and backbarrier stratigraphy are different from better studied coastal plain systems, and provide important clues to the Holocene evolution of the Maine coast. In a study of geomorphic form and backbarrier stratigraphy, inlet processes and Holocene sea-level rise have been identified as the principal controls on coarse-grained barrier stratigraphy. Barriers in Maine are found in five distinct geomorphic forms, identified herein as: barrier spits, pocket barriers, double tombolos, cuspate barriers and looped barriers. The few long sandy beaches in southwestern Maine are mostly barrier spits. The remainder of the barrier types is composed primarily of gravel or mixed sand and gravel. The barriers protect a variety of backbarrier environments: fresh and brackish ponds, lagoons and fresh- and saltwater marshes. The barriers may or may not have inlets. Normal wave action, coarse-grain size and a deeply embayed coast result in barriers with steep, reflective profiles several meters above MHW. Occasional storm events completely wash over the barriers, building steep, lobate gravel fans along their landward margin. Few, if any, extensive storm layers are recognized as extending into the distal backbarrier environments, however. During sea-level rise and landward barrier retreat, this abrupt, storm-generated transition zone inters the backbarrier sediments. Statistical comparisons of barrier morphology, location and backbarrier environment type with backbarrier stratigraphy show that Holocene backbarrier stratigraphy is best predicted by the modern backbarrier environment type. This, in turn, is influenced most by the absence or presence, and long-term stability or instability of a tidal inlet. Geomorphic barrier form and location in coastal geomorphic compartments show little or no correlation with backbarrier stratigraphy. In contrast to previous classifications of barrier-lagoon systems based primarily on sandy, coastal plain examples, in Maine the shape or origin of the backbarrier system is relatively unimportant. The presence or absence of a tidal inlet is of paramount importance in shaping the Holocene stratigraphy of the backbarrier region.

Marine Geology↗