Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Explorer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources
USGS1982

Pacific summary report 2: A revision of Outer Continental Shelf oil and gas activities in the Pacific (Southern California) and their onshore impacts: A summary report, May 1980

The Pacific Outer Continental Shelf (OCS) is an established hydrocarbon-producing region. Oil and gas have been produced from the Santa Barbara Channel (both State and Federal acreage) since 1896. Almost 77,000 barrels of oil are produced from the California Federal OCS each day as of December 1981, and leases on State tidelands produce about 40,000 barrels of oil per day. This highly developed area is, of course, but a small part of the Pacific OCS, which also includes Northern California, Washington, and Oregon. The petroleum industry has expressed interest in exploring frontier areas, and as frontier acreage is offered in future lease sales, exploration, development, and production may move out into deeper water. The technology is currently being developed and tested to allow deepwater exploration. To date, offshore drilling operations have resulted in the delineation of 11 offshore oil and gas fields and 2 gas fields in the Southern California OCS. A recent discovery off Point Arguello, California, may lead to delineation of a new field. Reserve estimates have been made for the known fields in the region. Remaining recoverable reserves are estimated at 787 million barrels of oil and over 1.7 trillion cubic feet of gas as of December 31, 1980. Estimates of undiscovered recoverable resources in the offshore Santa Maria Basin and Southern California OCS are over 3.5 billion barrels of oil and in excess of 5 trillion cubic feet of gas. To date, there have been seven oil and gas lease sales in the Pacific OCS Region. An average of one lease sale per year is scheduled through 1985. Industry interest indicates that the Santa Barbara Channel's potential has not yet been fully explored, and some basins to the south, as well as in the Santa Maria Basin, are now gaining considerable interest. Future exploratory activity in the San Pedro Bay and the Santa Maria Basin is likely to increase. Exploration, development, and production in the Pacific OCS Region are increasing at a moderate pace. Pipelines continue to be the preferred mode of transporting Pacific OCS hydrocarbons to shore. The State and the Federal Governments have expressed a commitment to the use of pipelines where possible and economically feasible. Tankers traveling in the Pacific and entering California ports carry, for the most part, imported oil. The region is active in OCS transportation planning; the Bureau of Land Management works through the Pacific States Regional Technical Working Group Committee. Onshore, the Petroleum Transportation Committee (formerly the Joint Government/Industry Pipeline Working Group) is evaluating a number of transportation scenarios. The nearshore and onshore petroleum processing facilities in the Pacific Region service onshore and offshore oil and gas exploration, development, and production, as well as the international oil market. Many of the onshore facilities have been in operation for years, supporting California's extensive onshore and offshore production. Several new facilities have been proposed, are currently under construction, or have recently opened. Shell Oil opened a crude oil distribution facility near Long Beach in December 1980. Operations began at Union Oil's Mandalay Beach separation and treatment plant in December 1981. The Pacific Offshore Pipeline Company, a subsidiary of the Pacific Lighting Corporation, is planning to build a gas treatment plant at Las Flores Canyon; completion of this project is scheduled for July 1983. It is expected that these new facilities, in addition to the established plants, will be able to accommodate any new OCS production in the near term from previously leased areas.

California↗
USGS2009

Quantifying the undiscovered geothermal resources of the United States

In 2008, the U.S. Geological Survey (USGS) released summary results of an assessment of the electric power production potential from the moderate- and high-temperature geothermal resources of the United States (Williams et al., 2008a; USGS Fact Sheet 2008-3082; http://pubs.usgs.gov/fs/2008/3082). In the assessment, the estimated mean power production potential from undiscovered geothermal resources is 30,033 Megawatts-electric (MWe), more than three times the estimated mean potential from identified geothermal systems: 9057 MWe. The presence of significant undiscovered geothermal resources has major implications for future exploration and development activities by both the government and private industry. Previous reports summarize the results of techniques applied by the USGS and others to map the spatial distribution of undiscovered resources. This paper describes the approach applied in developing estimates of the magnitude of the undiscovered geothermal resource, as well as the manner in which that resource is likely to be distributed among geothermal systems of varying volume and temperature. A number of key issues constrain the overall estimate. One is the degree to which characteristics of the undiscovered resources correspond to those observed among identified geothermal systems. Another is the evaluation of exploration history, including both the spatial distribution of geothermal exploration activities relative to the postulated spatial distribution of undiscovered resources and the probability of successful discoveries from the application of standard geothermal exploration techniques. Also significant are the physical, chemical, and geological constraints on the formation and longevity of geothermal systems. Important observations from this study include the following. (1) Some of the largest identified geothermal systems, such as The Geysers vapor-dominated system in northern California and the diverse geothermal manifestations found in Yellowstone National Park, are unique in North America and highly unlikely to have counterparts with equivalent characteristics among the systems comprising the undiscovered resources. (2) Historical geothermal exploration has been limited in both the effectiveness of techniques employed and spatial coverage, since most exploration has targeted areas associated with surface thermal manifestations in the most easily accessible lands. (3) As noted by other investigators, in general, the hottest and largest geothermal systems are those with heat sources arising from recent magmatic activity. Consequently, a larger fraction of the undiscovered resource is associated with those areas favorable to the formation of this type of geothermal system, including some relatively remote areas, such as the Aleutian volcanic arc in Alaska.

Conference Paper↗
USGS1998

Electrogeochemical sampling with NEOCHIM - results of tests over buried gold deposits

Electrogeochemical extraction methods are based on the migration of ions in an electric field. Ions present in soil moisture are transported by an applied current into fluids contained in special electrodes placed on the soil. The fluids are then collected and analyzed. Extractions are governed by Faraday's and Ohm's laws and are modeled by the operation of a simple Hittord transference apparatus. Calculations show that the volume of soil sampled in an ideal electrogeochemical extraction can be orders of magnitude greater than the volumes used in more popular geochemical extraction methods, although this has not been verified experimentally. CHIM is a method of in-situ electrogeochemical extraction that was developed in the former Soviet Union and has been tested and applied internationally to exploration for buried mineral deposits. Tests carried out at the US Geological Survey (USGS) indicated that there were problems inherent in the use of CHIM technology. The cause of the problems was determined to be the diffusion of acid from the conventional electrode into the soil. The NEOCHIM electrode incorporates two compartments and a salt bridge in a design that inhibits diffusion of acid and enables the collection of anions or cations. Tests over a gold-enriched vein in Colorado and over buried, Carlin-type, disseminated gold deposits in northern Nevada show that there are similarities and differences between NEOCHIM results and those by partial extractions of soils which include simple extractions with water, dilute acids and solutions of salts used as collector fluids in the electrodes. Results of both differ from the results obtained by total chemical digestion. The results indicate that NEOCHIM responds to mineralized faults associated with disseminated gold deposits whereas partial and total chemical extraction methods do not. This suggests that faults are favored channels for the upward migration of metals and that NEOCHIM may be more effective in exploration for the deposits. It defines anomalies that are often narrow and intense, an observation previously made by CHIM researchers. The field tests show that NEOCHIM is less affected by surface contamination. A test over the Mike disseminated gold deposit indicates that the method may not be effective for locating deposits with impermeable cover. Faradaic extraction efficiencies of 20-30%, or more, are frequently achieved with NEOCHIM and the method generally shows good reproducibility, especially in extraction of major cations. However, ions of other metals that are useful in exploration, including Au and As, may be collected in low and temporally variable concentrations. The reason for this variability is unclear and requires further investigation.CHIM is a method of in-situ electrogeochemical extraction developed for the exploration of buried mineral deposits. However, electrode problems like diffusion of acid into the soil were encountered during the use of CHIM. The NEOCHIM electrode was developed to inhibit the diffusion of acid and enable collection of anions or cations. Tests over buried gold deposits showed that NEOCHIM responds to mineralized faults associated with disseminated gold deposits whereas partial and total chemical extraction methods do not. This suggests that faults are favored channels for the upward migration of metals and NEOCHIM may be effective in exploration for the deposits. But ions of metals may be collected in low and variable concentration.

Journal of Geochemical Exploration↗
USGS2011

Gas shale/oil shale

The production of natural gas from shales continues to increase in North America, and shale gas exploration is on the rise in other parts of the world since the previous report by this committee was published by American Association of Petroleum Geologists, Energy Minerals Division (2009). For the United States, the volume of proved reserves of natural gas increased 11% from 2008 to 2009, the increase driven largely by shale gas development (Energy Information Administration 2010c). Furthermore, shales have increasingly become targets of exploration for oil and condensate as well as gas, which has served to greatly expand their significance as ‘‘unconventional’’ petroleum reservoirs. This report provides information about specific shales across North America and Europe from which gas (biogenic or thermogenic), oil, or natural gas liquids are produced or is actively being explored. The intent is to reflect the recently expanded mission of the Energy Minerals Division (EMD) Gas Shales Committee to serve as a single point of access to technical information on shales regardless of the type of hydrocarbon produced from them. The contents of this report were drawn largely from contributions by numerous members of the EMD Gas Shales Advisory Committee, with much of the data being available from public websites such as state or provincial geological surveys or other public institutions. Shales from which gas or oil is being produced in the United States are listed in alphabetical order by shale name. Information for Canada is presented by province, whereas for Europe, it is presented by country.

Natural Resources Research↗
USGS2026

Understanding the resource potential of natural hydrogen on Earth: Scientific gaps, uncertainties and recommendations

A comprehensive scientific research roadmap is essential to bridge knowledge gaps and deepen the understanding of key geological, geochemical, and geophysical aspects of natural hydrogen (H 2 ) as a potential new energy resource. This paper reviews major scientific uncertainties on natural H 2 , suggesting research priorities, as a guide for defining exploration strategies, techniques, and data interpretation. The uncertainties concern all phases of the natural H 2 cycle, from generation (source rocks) through migration (advection and diffusion) and accumulation (reservoir and cap rocks) to the application and interpretation of subsurface and surface geochemical and geophysical exploration techniques. Understanding H 2 sources and generation rates (the amount of H 2 generated by a given volume of rock over time) is crucial for determining whether a geological H 2 system operates as a short-term dynamic system with rapid H 2 production and release, or as a conventional gas system with long-term accumulations, analogous to petroleum reservoirs. Preliminary estimates for serpentinisation, radiolysis, and organic matter degradation suggest that H 2 generation is not inherently fast, especially for non-hydrothermal continental systems (crystalline basement of shields, ophiolites, peridotite massifs, sedimentary basins), and long-term accumulations, like those of fossil natural gas systems, represent the most likely scenario. The mechanisms of H 2 migration through geological formations require application of fundamental principles of fluid-flow physics, distinguishing advection and diffusion, as well as their forms (from gas-phase, bubble flows to aqueous solutions). Additional studies of H 2 accumulation and retention in subsurface reservoirs could improve understanding of mechanisms of H 2 migration by focusing on the rock fluid-bearing properties and the factors affecting H 2 preservation, such as the presence of cap rocks impermeable to H 2 , pressure conditions, residence times, and microbial or abiotic consumption. Advanced techniques, including reservoir modelling, flow simulations, 3D imaging (micro-CT) of H 2 -bearing rocks, and extraction and analysis of gas occluded in rocks, can provide insights into the stability and potential recoverability of H 2 accumulations. The interpretation of surface exploration techniques, including gas geochemistry, geophysics, and remote sensing, long employed in mineral and energy resource exploration, is now being adapted for natural H 2 studies, but challenges remain in the data interpretation. Distinguishing H 2 seepage due to geological degassing from H 2 produced near the surface by modern microbial processes or artificial sources, such as hammering or drilling for soil-gas sampling, drilling into aquifers, and corrosion in boreholes, is an essential step in exploration. The simple detection of H 2 in soils, even in morphological structures like sub-circular depressions or “fairy circles”, cannot be cursorily interpreted as a signal of natural H 2 seepage from a deep source. A holistic geochemical approach, including isotopic analyses of gases associated with H 2 , is recommended to distinguish among the variety of possible H 2 origins. Observations of H 2 in wells should be interrogated to rule out possible artifacts such as corrosion and drill bit metamorphism. The integration of multiple geophysical methods, including seismic, gravimetric, magnetic, and electro-magnetic surveys, is recommended to mitigate interpretation ambiguities regarding the structure of a subsurface H 2 system (source and reservoir rocks, including fluid and gas storage), due to the non-uniqueness of rock-specific physical properties.

Earth-Science Reviews↗
USGS1987

BOREHOLE NEUTRON ACTIVATION: THE RARE EARTHS.

Neutron-induced borehole gamma-ray spectroscopy has been widely used as a geophysical exploration technique by the petroleum industry, but its use for mineral exploration is not as common. Nuclear methods can be applied to mineral exploration, for determining stratigraphy and bed correlations, for mapping ore deposits, and for studying mineral concentration gradients. High-resolution detectors are essential for mineral exploration, and by using them an analysis of the major element concentrations in a borehole can usually be made. A number of economically important elements can be detected at typical ore-grade concentrations using this method. Because of the application of the rare-earth elements to high-temperature superconductors, these elements are examined in detail as an example of how nuclear techniques can be applied to mineral exploration.

IEEE Transactions on Nuclear Science↗
USGS2011

Recent faulting in western Nevada revealed by multi-scale seismic reflection

The main goal of this study is to compare different reflection methods used to image subsurface structure within different physical environments in western Nevada. With all the methods employed, the primary goal is fault imaging for structural information toward geothermal exploration and seismic hazard estimation. We use seismic CHIRP (a swept-frequency marine acquisition system), weight drop (an accelerated hammer source), and two different vibroseis systems to characterize fault structure. We focused our efforts in the Reno metropolitan area and the area within and surrounding Pyramid Lake in northern Nevada. These different methods have provided valuable constraints on the fault geometry and activity, as well as associated fluid movement. These are critical in evaluating the potential for large earthquakes in these areas, and geothermal exploration possibilities near these structures.

Nevada↗
USGS1969

The Geologic Story of the Uinta Mountains

The opening of the West after the Civil War greatly stimulated early geologic exploration west of the 100th Meridian. One of the areas first studied, the Uinta Mountains region, gained wide attention as a result of the explorations of three Territorial Surveys, one headed by John Wesley Powell, one by Clarence King, and one by Ferdinand V. Hayden. Completion of the Union Pacific Railroad across southern Wyoming 100 years ago, in 1869, materially assisted geologic exploration, and the railheads at Green River and Rock Springs greatly simplified the outfitting of expeditions into the mountains. The overlap of the Powell, King, and Hayden surveys in the Uinta Mountains led to efforts that were less concerted than competitive and not without acrimony. Many parts of the area were seen by all three parties at almost the same time. Duplication was inevitable, of course, but all three surveys contributed vast quantities of new knowledge to the storehouse of geology, and many now-basic concepts arose from their observations. Powell's area of interest extended mainly southward from the Uinta Mountains to the Grand Canyon, including the boundless plateaus and canyons of southern Utah and northern Arizona. King's survey extended eastward from the High Sierra in California to Cheyenne, Wyoming, and encompassed a swath of country more than 100 miles wide. Hayden's explorations covered an immense region of mountains and basins from Yellowstone Park in Wyoming southeast throughout most of Colorado. Powell first entered the Uinta Mountains in the fall of 1868, having traveled north around the east end of the range from the White River country to Green River, Wyoming, then south over a circuitous route to Flaming Gorge and Browns Park, and finally back to the White River, where he spent the winter. In 1869, after reexamining much of the area visited the previous season, Powell embarked on his famous 'first boat trip' down the Green and Colorado Rivers. This trip was more exploratory than scientific; his second, more scientific trip was made 2 years later. Powell revisited the Uinta Mountains in 1874 and 1875 to complete the studies begun 6 years earlier. His classic 'Report on the Geology of the Eastern Portion of the Uinta Mountains and a Region of Country Adjacent Thereto' was published in 1876. King's survey?officially 'The United States Geological Exploration of the Fortieth Parallel'?is better known simply as the '40th Parallel Survey.' King began working eastward from California in 1867. The Uinta Mountains region, however, was mapped by S. F. Emmons, under the supervision of King, in the summers of 1869 and 1871. Emmons' work was monumental, and although he emphasized in his letter of transmittal to King the exploratory nature of the work?as the formal title of the report indicates?his maps, descriptions, and conclusions reflect a comprehensive understanding of the country and its rocks. The 40th Parallel report contains the best, most complete early descriptions of the Uinta Mountains. It, indeed, is a treasurechest of information and a landmark contribution to the emerging science of geology. Hayden visited the Uinta Mountains in 1870, descending the valley of Henrys Fork to Flaming Gorge in the fall after having earlier examined the higher part of the range to the west. Most of Hayden's observations were cursory, and he repeatedly expressed regret at having insufficient time for more detailed studies. In reference to the area between Clay Basin and Browns Park, he remarked (Hayden, 1871, p. 67) somewhat dryly that 'the geology of this portion of the Uinta range is very complicated and interesting. To have solved the problem to my entire satisfaction would have required a week or two.' Eighty-odd years later I spent several months there?looking at the same rocks. Powell was perhaps more creative?more intuitive?than either King or Hayden, and his breadth of interest in the fields of geology, physiography, ethnology, an

Bulletin↗
USGS1984

Assessment of undiscovered conventionally recoverable petroleum resources of the Northwest European region

The estimates of undiscovered conventionally recoverable petroleum resources in the northwest European region at probability levels of 95 percent, 5 percent, statistical mean, and mode are for oil (in billions of barrels): 9, 34, 20, and 15; and for gas (in trillions of cubic feet): 92, 258, 167, and 162. The occurrence of petroleum can be accounted for in two distinct geological plays located in the various subbasins of the region. Play I is associated with the distribution of mature source rocks of Late Jurassic age relative to four distinct trapping conditions. The play has been demonstrated productive mostly in the Viking and Central Grabens of the North Sea, where the shale has been buried to optimum depths for the generation of both oil and gas. To the north of 62 ? N. latitude up to the Barents Sea, source rocks become increasingly deeply buried and are interpreted to be dominantly gas prone; a narrow band of potentially oil-prone shales tracks most of the coast of Norway, but water depths in favorable localities commonly range from 600 to 1,200 feet. To the south of the Central Graben, the Jurassic source rocks are either immature or minimally productive because of a change in facies. Undrilled traps remain within the favorable source-rock area, and exploration will continue to challenge the boundaries of conventional wisdom, especially on the Norwegian side where little has .been reported on the geology of the adjoining Bergen High or Horda Basin, though, reportedly, the Jurassic source rocks are missing on the high and are immature in the southern part of the basin. Play II is associated with the distribution of a coal facies of Carboniferous age that is mature for the generation of gas and locally underlies favorable reservoir and sealing rocks. The play is limited largely by facies development to the present area of discovery and production but is limited as well to the southeast into onshore Netherlands and Germany by the unfavorable economics of an increasing nitrogen content in the gas. This increase is apparently caused by excessive temperatures associated with increasing depth of burial of the source rock. The history of discovery in the North Sea would appear to deny the commonly held maxim that large fields are found first and early in the exploration process. However, if the discovery data are examined from the perspective of the award date of each exploration license, then it is clear that the largest fields and most of the reserves have indeed been found early in the exploration process of a particular license. Discoveries made within 1 year of granting the license are on average large giants, and they account for slightly less than two-thirds of the original reserves. Discoveries made within 2 to 5 years of the granting of the license are on average less than giant size and smaller than increment-l-year discoveries by a factor of 4; these fields account for a little less than one-third of the reserves. Those fields found 6 or more years after the granting of the license are relatively small and account for 20 percent of all discoveries but only 4 percent of total original reserves. These data suggest that a measure of an area's exploration maturity is the length of time elapsed since the award of the concession.

Circular↗
USGS2010

2010 updated assessment of undiscovered oil and gas resources of the National Petroleum Reserve in Alaska (NPRA)

Using a geology-based assessment methodology, the U.S. Geological Survey estimated mean volumes of 896 million barrels of oil (MMBO) and about 53 trillion cubic feet (TCFG) of nonassociated natural gas in conventional, undiscovered accumulations within the National Petroleum Reserve in Alaska and adjacent State waters. The estimated volume of undiscovered oil is significantly lower than estimates released in 2002, owing primarily to recent exploration drilling that revealed an abrupt transition from oil to gas and reduced reservoir quality in the Alpine sandstone 15-20 miles west of the giant Alpine oil field. The National Petroleum Reserve in Alaska (NPRA) has been the focus of oil exploration during the past decade, stimulated by the mid-1990s discovery of the adjacent Alpine field-the largest onshore oil discovery in the United States during the past 25 years. Recent activities in NPRA, including extensive 3-D seismic surveys, six Federal lease sales totaling more than $250 million in bonus bids, and completion of more than 30 exploration wells on Federal and Native lands, indicate in key formations more gas than oil and poorer reservoir quality than anticipated. In the absence of a gas pipeline from northern Alaska, exploration has waned and several petroleum companies have relinquished assets in the NPRA. This fact sheet updates U.S. Geological Survey (USGS) estimates of undiscovered oil and gas in NPRA, based on publicly released information from exploration wells completed during the past decade and on the results of research that documents significant Cenozoic uplift and erosion in NPRA. The results included in this fact sheet-released in October 2010-supersede those of a previous assessment completed by the USGS in 2002.

Fact Sheet↗
USGS2010

Volcanogenic uranium deposits: Geology, geochemical processes, and criteria for resource assessment

Felsic volcanic rocks have long been considered a primary source of uranium for many kinds of uranium deposits, but volcanogenic uranium deposits themselves have generally not been important resources. Until the past few years, resource summaries for the United States or the world generally include volcanogenic in the broad category of "other deposits" because they comprised less than 0.5 percent of past production or estimated resources. Exploration in the United States from the 1940s through 1982 discovered hundreds of prospects in volcanic rocks, of which fewer than 20 had some recorded production. Intensive exploration in the late 1970s found some large deposits, but low grades (less than about 0.10 percent U 3 O 8 ) discouraged economic development. A few deposits in the world, drilled in the 1980s and 1990s, are now known to contain large resources (>20,000 tonnes U 3 O 8 ). However, research on ore-forming processes and exploration for volcanogenic deposits has lagged behind other kinds of uranium deposits and has not utilized advances in understanding of geology, geochemistry, and paleohydrology of ore deposits in general and epithermal deposits in particular. This review outlines new ways to explore and assess for volcanogenic deposits, using new concepts of convection, fluid mixing, and high heat flow to mobilize uranium from volcanic source rocks and form deposits that are postulated to be large. Much can also be learned from studies of epithermal metal deposits, such as the important roles of extensional tectonics, bimodal volcanism, and fracture-flow systems related to resurgent calderas. Regional resource assessment is helped by genetic concepts, but hampered by limited information on frontier areas and undiscovered districts. Diagnostic data used to define ore deposit genesis, such as stable isotopic data, are rarely available for frontier areas. A volcanic environment classification, with three classes (proximal, distal, and pre-volcanic structures), permits use of geologic features on 1:500,000 to 1:100,000 scale maps. Geochemical databases for volcanic rocks are postulated to be more effective than databases for stream sediments or surface radioactivity, both of which tend to be inconsistent because of variable leaching of uranium from soils. Based on empirical associations, spatial associations with areas of wet paleoclimate, adjacent oil and gas fields, or evaporite beds are deemed positive. Most difficult to estimate is the location of depositional traps and reduction zones, in part because they are mere points at regional scale. Grade and tonnage data are reviewed and discussed for 32 deposits in the world. Experience of mining engineers and geologists in Asia suggests that tonnages could be higher than presently known in the Western Hemisphere. Geological analysis, and new data from Asia, suggest a typical or median deposit tonnage of about 5,000 tonnes U 3 O 8 , and an optimistic forecast of discoveries in the range of 5,000 to 20,000 tonnes U 3 O 8 . The likely grade of undiscovered deposits could be about 0.15 percent U 3 O 8 , based on both western and eastern examples. Volcanic terrane is under-explored, relative to other kinds of uranium deposits, and is considered a favorable frontier area for new discoveries.

Open-File Report↗
USGS2016

Aquatic Trophic Productivity model: A decision support model for river restoration planning in the Methow River, Washington

Introduction The U.S. Geological Survey (USGS) has developed a dynamic food-web simulation model to provide decision support for Bureau of Reclamation (Reclamation) river restoration projects in the Methow River, Washington. This modeling effort was done to contribute to Reasonable and Prudent Alternative actions 56 and 57of the 2014 Federal Columbia River Power System Biological Opinion (FCRPS BO), which calls for exploration of modeling as a means to help evaluate Endangered Species Act (ESA)-listed fish response to river restoration efforts. In the Methow River, these species of concern include Upper Columbia River (UCR) spring Chinook salmon ( Oncorhynchus tshawytscha ) and UCR summer steelhead ( Oncorhynchus mykiss ). Additionally, the Independent Scientific Advisory Board (ISAB) for the Columbia River has identified the need for modeling (Independent Scientific Advisory Board, 2011a)—including models that incorporate food-web dynamics (Independent Scientific Advisory Board, 2011b)—to better understand how restoration and management strategies might enhance salmon and steelhead populations. Dynamic food-web models, even relatively simple ones, can be valuable tools for exploring responses to river restoration. Although these models have rarely been applied to rivers and streams (but see Mcintire and Colby, 1978; Power and others, 1995), they are commonly used for management decisions in terrestrial and ocean ecosystems (Christensen and Pauly, 1993; Evans and others, 2013). One of the main strengths of these models is that they are rooted in the fundamental laws of thermodynamics (that is, mass balance). Moreover, these models can be easily adapted to different contexts by adding or subtracting different species from the web and by mechanistically linking the dynamics of web members to local environmental conditions, such as water temperature, stream discharge, and channel hydraulics (Power and others, 1995; Doyle, 2006). Alternative management actions can then be evaluated by changing these environmental conditions to simulate potential outcomes following restoration. In this report, we outline the structure of a stream food-web model constructed to explore how alternative river restoration strategies may affect stream fish populations. We have termed this model the “Aquatic Trophic Productivity model” (ATP). We present the model structure, followed by three case study applications of the model to segments of the Methow River watershed in northern Washington. For two case studies (middle Methow River and lower Twisp River floodplain), we ran a series of simulations to explore how food-web dynamics respond to four distinctly different, but applied, strategies in the Methow River watershed: (1) reconnection of floodplain aquatic habitats, (2) riparian vegetation planting, (3) nutrient augmentation (that is, salmon carcass addition), and (4) enhancement of habitat suitability for fish. For the third case study, we conducted simulations to explore the potential fish and food-web response to habitat improvements conducted in 2012 at the Whitefish Island Side Channel, located in the middle Methow River.

Washington↗
USGS1975

Mineral deposits in western Saudi Arabia; a preliminary report

Mineral deposits in Saudi Arabia include a variety of deposits which were formed in many geologic environments. These include magmatic and late magmatic deposits in igneous masses, contact metamorphic deposits along the margins of igneous bodies, and stratiform sulfide deposits and veins. Notable deposits of sedimentary origin include deposits of iron oxides and phosphate. Strata-bound massive sulfide deposits containing copper, zinc, and nickel sulfides associated with pyrite and pyrrhotite in complexly deformed volcanic rocks in Saudi Arabia have been the subject of controversy. They are considered by some geologists to be of syngenetic or volcanogenic origin, and by others to be epigenetic. The principal mineral deposits in western Saudi Arabia are localized in mineral belts within tectonic zones that trend northerly, northeasterly, and northwesterly. These belts contain the exploration target areas most promising for future exploration. Noteworthy among these are: 1) the northerly-trending Bidah copper-zinc belt; 2) the Sayid copper-zinc zone; 3) the northwest-trending Nuqrah copper zinc-silver belt; and 4) the north-northwesterly-trending Al Amar belt. Gold and silver deposits are mainly localized in north-trending structural features of the Hijaz geotectonic cycle and northwest Najd trends. Saudi Arabian metal deposits known thus far contain reserves in the 2 billion dollar range. Further exploration should result in discoveries that could significantly increase this amount; Saudi Arabia may well have workable metallic and nonmetallic mineral resources for industrial developments in many parts of the Kingdom. In order to effectively carry on a search for new mineral deposits, the belts should be mapped in detail, with emphasis on the delineation of stratigraphic and structural features that control metallization. In addition, geochemical and geophysical studies should be made of promising areas to outline exploration targets. These targets could then be systematically explored.

Open-File Report↗
USGS1981

Arctic summary report: Outer Continental Shelf and onshore oil and gas activities and impacts in the Arctic : a summmary report, October 1981

Due to the amount of Federal and State oil and gas activity in the Arctic subregion and the need for comprehensive planning, State and local officials requested coverage of all oil and gas activity in the area. The first lease sale of offshore lands in the Beaufort Sea was held by the State of Alaska in 1969. The leasing process for oil and gas exploration on the Beaufort Sea Outer Continental Shelf (OCS) began in April 1976 with the first Federal lease sale in the subregion (Joint Federal/State Beaufort Sea Lease Sale) held in 1979. This sale was held jointly by the Department of the Interior and the State of Alaska because of conflicting jurisdictional claims to certain tracts in the sale area. The jurisdictional dispute will be resolved by the U.S. Supreme Court, but a decision is not expected for several years. The joint sale was held on December 11, 1979. However, bids on the Federal tracts were not accepted until July 1980 because of litigation. Of the 117 tracts offered, 86 were leased as a result of the sale. Of these 86 tracts, 24 are federally managed and 62 are State-managed. Two exploration plans have been submitted for the federally managed joint lease sale (Sale BF) area. Both plans call for building a gravel island and exploratory drilling of several tracts, but no drilling permits have yet been filed. Three exploratory wells have been drilled on or into State-managed tracts. These include one well drilled directionally into Tract 75, one into Tract 76, and one well drilled from Challenge Island, a natural barrier island. Additional exploratory wells are planned for the 1981-82 drilling season on State-managed tracts. The next OCS sale in the Beaufort Sea, Lease Sale 71, is proposed for September 1982. The first two sales in the National Petroleum Reserve in Alaska are being planned for December 1981 and the late spring or early summer of 1982 and will involve a total of 2 million acres (809,200 hectares). In anticipation of future leasing, plans for geophysical surveys in the Arctic National Wildlife Refuge are also being formulated. Four State lease sales have been held in the Arctic, in addition to the Joint Federal/State Lease Sale. These onshore sales have resulted in the leasing of lands on which a number of commercial discoveries have been made, including the discovery of the largest hydrocarbon accumulation in North America at Prudhoe Bay. Exploration, development, and production are continuing on these State lands. The State of Alaska has plans for three future lease sales in the Arctic to be held in the spring of 1982 and 1983 and the fall of 1984. Leasing and exploration are also under way on Arctic Slope Regional Corporation lands. Transportation systems in the Arctic have been developed to accommodate production on State lands. Some of the production from OCS tracts, as well as other Arctic lands, may be handled by the existing Trans-Alaska Pipeline System. However, a number of additional transportation strategies are being considered, including the Alaska Natural Gas Transportation System, additional oil pipelines, and tanker transport. The pace of oil and gas production in the Arctic will depend in part on the number and type of transportation modes available. The support bases at Prudhoe Bay are expected to be used to some extent for future activities on the OCS. However, expanded and new facilities will also be required, depending on the location of discoveries on the OCS and on other Arctic lands. The impacts resulting from OCS activities in the Arctic will be particularly important because of their contribution to the regionwide and cumulative impacts arising from Federal onshore, State, and regional corporation oil and gas exploration, development, and production in the Arctic.

Alaska↗
USGS1982

Assessment of the petroleum, coal, and geothermal resources of the Economic Community of West African States (ECOWAS) region

Approximately 85 percent of the land area of the ECOWAS (Economic Community of West African States) region is covered by basement rocks (igneous and highly metamorphosed rocks) or relatively thin layers of Paleozoic, Upper Precambrian, and 'Continental Intercalaire? sedimentary rocks. These areas have little or no petroleum potential. Areas of the ECOWAS region that have potential for petroleum production or potential for increased petroleum production include the narrow belt of sedimentary rocks that stretches along the continental margin from Mauritania to Nigeria and the Niger Delta and the Benue depression. The Senegal Basin, located on the continental margin of Mauritania, Senegal, Gambia, Guinea Bissau, and Guinea, has been intensely explored by the oil industry and most of the larger structures onshore and on the shelf probably have been tested by drilling with little or no resulting commercial production. Unless basic ideas pertaining to the petroleum geology of the Senegal Basin are revised, future discoveries are expected to be limited to small fields overlooked by industry at a time when petroleum prices were low. On the continental shelf of Sierra Leone and the continental shelf of northeast and central Liberia, the sedimentary rocks are relatively thin, and industry has shown little interest in the area. On the continental rise of these countries, however, the sedimentary section, deposited in a complex fault-block system, increases in thickness. A renewal of industry interest in this deep-water area will probably follow further development of deep-water production technology. A recent oil discovery on the continental slope off the Ivory Coast is expected to spur further exploration offshore of southeastern Liberia, Ivory Coast, Ghana, Togo, and Benin. This relatively unexplored area in the Gulf of Guinea has good possibilities .for the discovery of giant oil fields. Nigeria's oil development from the Niger Delta may have peaked, as 13 of 14 giant oil fields were discovered prior to 1969 and the greatest number of fields were discovered in the period 1965 through 1967. Like delta regions in other parts of the world, individual oil fields of the Niger Delta are small to medium by world standards and future discoveries, therefore, are likely to reflect this reality. The natural gas resources of the Niger Delta, unlike its oil resources, are comparatively underdeveloped. Parts of the Benue depression in Nigeria and Niger could contain significant deposits of petroleum. The lower Benue depression, immediately north of the Niger Delta, has been extensively explored by drilling. Except for noncommercial discoveries of oil and gas and traces of oil and gas on the ground surface, the results of exploration in the lower Benue depression were negative. However, in the Lake Chad area of Chad and in southern Chad near the Central African Republic boundary, oil and gas discoveries were made just prior to the cessation of all drilling and exploration activity in early 1979. It is rumored that these discoveries may be large although little information is available. The relation between the two areas in Chad and their overall relation to the Benue depression is poorly understood; however, the possibility of thick sedimentary sections containing Cretaceous marine source rock and Tertiary reservoir beds-all contained within grabens in a highly faulted failed-arm system subjected to high heat flow--is attractive. Of the ECOWAS countries, only Nigeria and Niger produce coal commercially. Nigeria produces subbituminous coal from Paleocene-Maestrichtian and Maestrichtian (Late Cretaceous) age rocks of the Niger Delta region; reserves are estimated, on the basis of extensive drilling, to be 350 million tons (standard coal equivalent). In addition, lignite deposits of the Niger Delta appear to be large but have not been developed. Niger produces small amounts of coal used locally by uranium mine and mill operations from C

Open-File Report↗
USGS1990

Follow-up evaluation of fifteen geochemically anomalous areas and evaluation of four prospects in the Farah Garan-Kutam mineral belt, Kingdom of Saudi Arabia

A follow-up exploration program was conducted in fifteen areas anomalous in precious and base metals within the Farah Garan-Kutam mineral belt, which forms part of a strongly deformed greenstone terrane in the southern part of the Proterozoic Arabian Shield. Using detailed chip-sample traverses, the program also evaluated four mineralized prospects, two of which (Raiah and Al Misadij prospects) had been recognized before the exploration program began; the additional two prospects (Kuhaym and Khathl prospects) were discovered during the course of the exploration program. Mineralized rock discovered during the exploration program consists of three types: (1) precious- and base-metal occurrences associated with large, lenticular, quartz-veined dolomitic bodies interpreted to be submarine exhalative deposits; the highest metal-concentration values are associated with silicified shear zones within the dolomite, which commonly were the sites of ancient mines; (2) precious- and base-metal mineralization associated with several small, isolated quartz veins scattered throughout the mineral belt; and (3) zones (several kilometers long and several hundred meters wide, with long axes oriented parallel to foliation) of variably silicified and pyritized greenstone and quartz-sericite phyllite; extensively dolomitized rock generally occurs in a zone surrounding the silicified and pyritized rock. Grades and (or) tonnages of all occurrences discovered during the exploration program are low the silicified and pyritized zones are entirely barren of base or precious metals-and no further work on them is recommended. The only significant mineralization discovered within the study area is located at the Raiah prospect, where a silicified shear zone (about 1 m wide) in lenticular exhalative dolomite body, contains as much as 5 ppm Au, 85 ppm Ag, 1.1 percent Cu, 2.6 percent Pb, and 10.7 percent Zn. Concentrations of the same elements within the surrounding dolomite are anomalously high, although they are significantly lower than values obtained in the shear zone. The inferred small tonnage of the deposit does not warrant further study.

Open-File Report↗
USGS2007

Color shaded-relief and surface-classification maps of the Fish Creek Area, Harrison Bay Quadrangle, Northern Alaska

The northeastern part of the National Petroleum Reserve in Alaska (NPRA) has become an area of active petroleum exploration during the past five years. Recent leasing and exploration drilling in the NPRA requires the U.S. Bureau of Land Management (BLM) to manage and monitor a variety of surface activities that include seismic surveying, exploration drilling, oil-field development drilling, construction of oil-production facilities, and construction of pipelines and access roads. BLM evaluates a variety of permit applications, environmental impact studies, and other documents that require rapid compilation and analysis of data pertaining to surface and subsurface geology, hydrology, and biology. In addition, BLM must monitor these activities and assess their impacts on the natural environment. Timely and accurate completion of these land-management tasks requires elevation, hydrologic, geologic, petroleum-activity, and cadastral data, all integrated in digital formats at a higher resolution than is currently available in nondigital (paper) formats. To support these land-management tasks, a series of maps was generated from remotely sensed data in an area of high petroleum-industry activity (fig. 1). The maps cover an area from approximately latitude 70°00' N. to 70°30' N. and from longitude 151°00' W. to 153°10' W. The area includes the Alpine oil field in the east, the Husky Inigok exploration well (site of a landing strip) in the west, many of the exploration wells drilled in NPRA since 2000, and the route of a proposed pipeline to carry oil from discovery wells in NPRA to the Alpine oil field. This map area is referred to as the "Fish Creek area" after a creek that flows through the region. The map series includes (1) a color shaded-relief map based on 5-m-resolution data (sheet 1), (2) a surface-classification map based on 30-m-resolution data (sheet 2), and (3) a 5-m-resolution shaded relief-surface classification map that combines the shaded-relief and surface-classification data (sheet 3). Remote sensing datasets that were used to compile the maps include Landsat 7 Enhanced Thematic Mapper+ (ETM+), and interferometric synthetic aperture radar (IFSAR) data. In addition, a 1:250,000-scale geologic map of the Harrison Bay quadrangle, Alaska (Carter and Galloway, 1985, 2005) was used in conjunction with ETM+ and IFSAR data.

Alaska↗
USGS2011

Porphyry copper assessment of British Columbia and Yukon Territory, Canada: Chapter C in Global mineral resource assessment

The U.S. Geological Survey does regional, national, and global assessments of resources (mineral, energy, water, biologic) to provide science in support of land management and decision making. Mineral resource assessments provide a synthesis of available information about where mineral deposits are known and suspected to be in the Earth’s crust, which commodities may be present, and estimates of amounts of resources that may be present in undiscovered deposits. Canada is an important source of copper, consistently ranking as one of the top 10 world producers during the past decade (2000–2010). The preponderance of this production has been from porphyry-copper-type deposits in the western Canadian Cordillera. A probabilistic mineral resource assessment of undiscovered resources associated with porphyry copper deposits in western Canada was completed as part of a global mineral resource assessment. The purpose of the assessment was to (1) compile a database of known deposits and significant prospects, (2) delineate permissive areas (tracts) for undiscovered porphyry copper deposits that may be present in the upper kilometer (minimally) of the Earth’s crust, and (3) provide probabilistic estimates of amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in undiscovered porphyry copper deposits in the tracts. The study was done by the U.S. Geological Survey (USGS) in collaboration with geologists from the British Columbia Geological Survey, Yukon Geological Survey, and industry consultants. The database of known deposits and significant prospects includes an inventory of mineral resources in 89 known porphyry copper (and 2 related copper-bearing polymetallic vein) ore zones, representing 50 porphyry copper deposits, and lists key characteristics of 280 additional porphyry copper and related copper-bearing prospects, as indicated by currently available exploration results, which also are summarized. Resource and exploration and development activity are updated with information current through April 2010. The delineation of permissive tracts and probabilistic estimation of resources in undiscovered deposits were done using the USGS three-part mineral resource assessment approach. Permissive tracts are defined in accordance with descriptive models for porphyry copper deposits to include igneous rocks and known deposits and prospects within magmatic arcs related to convergent plate-margin boundary zones. Frequency distributions of total tonnages and average grades of thoroughly explored deposits were used as models for undiscovered deposits and include a new grade and tonnage model for calc-alkaline porphyry Cu±Mo±Au deposits in western Canada. Five permissive tracts for the occurrence of porphyry copper deposits were delineated: 2 island-arc tracts, 1 tract of transitional, mixed island-arc and continental arc affinities, and 2 continental arc tracts. In permissive tract 003pCu2001, calc-alkaline igneous rocks of Middle Triassic to Late Jurassic age in accreted island-arc terranes of the Intermontane belt are assessed for calc-alkaline porphyry Cu±Mo±Au deposits. The area of this tract is 175,250 km 2 . In 12 known deposits, the total reported tonnage of ore is 8,100 million metric tons (Mt) containing 24.6 Mt copper. An estimated 6.9 undiscovered deposits contain a calculated mean of 8.9 Mt copper and a median of 6.9 Mt copper. The spatial density for the 18.9 known plus estimated undiscovered deposits in this tract is approximately 11 deposits per 100,000 km 2 . In permissive tract 003pCu2002, alkaline igneous rocks of Middle Triassic to Late Jurassic age within the Intermontane accreted island-arc terranes are assessed for alkaline porphyry Cu-Au deposits. The area of this tract is 109,290 km 2 . In 12 known deposits the total reported tonnage of ore is 6,440 Mt, containing 20.9 Mt copper. An estimated 7 undiscovered deposits contain a calculated mean of 22 Mt copper and a median of 13 Mt copper. The spatial density for the 19 known plus estimated undiscovered deposits in this tract is approximately 17 deposits per 100,000 km 2 . In permissive tract 003pCu2003, calc-alkaline igneous rocks of Late Triassic to Early Cretaceous age within the accreted Insular terranes of mixed island-arc and continental arc affinities are assessed for calc-alkaline porphyry Cu±Mo±Au deposits. The area of this tract is 58,360 km 2 . The total tonnage of ore reported in the 2 known deposits is 1,160 Mt containing 3.17 Mt copper. An estimated 2.3 undiscovered deposits contain a calculated mean of 3 Mt copper and a median of 1.9 Mt copper. The spatial density for the 4.3 known plus estimated undiscovered deposits in this tract is approximately 7 deposits per 100,000 km 2 . In permissive tract 003pCu2004, calc-alkaline igneous rocks in continental magmatic arcs of Jurassic to Eocene age are assessed for porphyry Cu±Mo±Au deposits. The area of this tract is 639,500 km 2 . The total tonnage of ore reported for the 23 known deposits is 6,520 Mt containing 17.9 Mt copper. An estimated 9.6 undiscovered deposits contain a calculated mean of 13 Mt copper and a median of 11 Mt copper. The spatial density for the 32.6 known deposits plus the estimated undiscovered deposits in this tract is approximately 5 deposits per 100,000 km 2 . In permissive tract 003pCu2005, calc-alkaline igneous rocks in continental magmatic arcs of Oligocene to Pliocene age are assessed for porphyry Cu±Mo±Au deposits. The area of this tract is 32,840 km 2 . The total tonnage of ore reported for the 1 known deposit is 44.8 Mt containing 0.224 Mt copper. An estimated 1.4 undiscovered deposits contain a calculated mean of 1.8 Mt copper and a median of 0.72 Mt copper. The spatial density for the 2.4 known plus estimated undiscovered deposits in this permissive tract is approximately 7 deposits per 100,000 km 2 . Western Canada has been thoroughly explored for porphyry copper deposits. The total estimated copper contained in known deposits is about 66.8 Mt (based on 2010 data), as compared to a 49 Mt mean of estimated copper in undiscovered deposits and a 34 Mt median of estimated copper in undiscovered deposits. The copper contained in known porphyry copper deposits represents about 58 percent of the total of known and undiscovered porphyry copper deposits (based on mean values). About 86 percent of the increase in estimated copper resources between 1993 and 2009 resulted from the discovery of extensions to known deposits. Nevertheless, exploration for undiscovered deposits continues, especially in and around significant prospects and in parts of permissive tracts that are mostly hidden beneath younger volcanic, sedimentary, or vegetated surficial cover.

British Columbia, Yukon Territory↗