Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Elements”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources

Priority-pollutant trace elements in streambed sediments of the Cook Inlet basin, Alaska, 1998-2000

Trace element concentrations in 48 streambed sediment samples collected at 47 sites in the Cook Inlet Basin, Alaska, were compared to concentrations from studies in the conterminous United States using identical methods and to Probable Effect Concentrations. Concentrations of arsenic, chromium, mercury, and nickel in the 0.063-mm size fraction of streambed sediments from the Cook Inlet Basin were elevated relative to reference sites in the conterminous United States. Concentrations of cadmium, lead, and zinc were highest at the most urbanized site in Anchorage and at two sites downstream from an ore body in Lake Clark National Park and Preserve. At least 35 percent of the 48 samples collected in the Cook Inlet Basin exceeded the Probable Effect Concentration for arsenic, chromium, or nickel. More than 50 percent of the samples were considered to have low potential toxicity for cadmium, lead, mercury, nickel, selenium, and zinc. A Probable Effect Concentration quotient that reflects the combined toxicity of arsenic, cadmium, chromium, copper, lead, mercury, nickel, and zinc was exceeded in 44 percent of the samples from the Cook Inlet Basin. The potential toxicity was high in the Denali and Lake Clark National Parks and Preserves where organic carbon concentrations in streambed sediments were low. However, potential toxicity results should be considered in context with the very small amounts of fine-grained sediment present in the streambed sediments of the Cook Inlet Basin.

Water-Resources Investigations Report↗

Simulation of the shallow aquifer in the vicinity of Silver Lake, Washington County, Wisconsin, using analytic elements

Shallow ground-water flow in the vicinity of Silver Lake, Washington County, Wisconsin, was investigated to develop an understanding of the hydrology of the shallow aquifer, define a water balance for the lake, delineate ground-water recharge areas for the lake, and to estimate solute flux toward the lake. A single-layer, steady-state, analytic-element model was used to simulate shallow ground-water flow. Regional model parameters include a recharge rate of 4 inches per year, hydraulic conductivity of 50 feet per day and a model base of 800 feet above sea level. A model inhomogeneity was added to represent deviations from these regional values for an area roughly coincident with the Kettle Moraine Area that trends through the study area. Model calibration was accomplished by varying the regional parameter values and those of the inhomogeneity through trial-and-error to determine a best-fit match between simulated and measured values for head and streamflow targets. There was no change to the regional parameter values as a result of calibration, however, the calibrated values for the inhomogeneity are: recharge rate of 12 inches per year, hydraulic conductivity of 20 feet per day, and a model base of 900 feet. These changes represent a four- to five-fold reduction in transmissivity within the inhomogeneity as compared to the regional model. A Silver Lake water budget was defined using both published hydrologic data and simulations using the calibrated model. Model simulations show that 1.08 cubic feet per second of ground water enters Silver Lake on the upgradient (primarily western) side and 0.08 cubic feet per second recharges to ground water on the downgradient (primarily eastern) side. Net precipitation (precipitation minus evaporation) on the lake is 0.04 cubic feet per second. Collectively, these water-budget terms provide a residual value of 1.04 cubic feet per second flow to Silver Creek at the north end of Silver Lake, which is a very good match to the range of measured flow (0.7 to 5.2 cubic feet per second). Ground-water recharge areas for Silver Lake are largely on the western side of the lake. The recharge area for the northern two-thirds of Silver Lake is west toward Big Cedar Lake. Assuming a porosity of 20 percent, model results indicate that the 50-year time-of-travel for recharge to Silver Lake does not extend to Big Cedar Lake. The recharge area for the southern one-third of Silver Lake is west toward Little Cedar Lake. Model results indicate that time of travel for recharge to Silver Lake from Little Cedar Lake is about 15 to 20 years. For travel times greater than 15 or 20 years, the ground-water recharge area for Little Cedar Lake and inflow from Big Cedar Lake also should be considered recharge affecting Silver Lake. Solute flux toward Silver Lake was calculated based on simulated ground-water flux and measured concentrations in the upgradient piezometers and observation wells.

Wisconsin↗

Preliminary plasma spectrometric analyses for selected elements in some geothermal waters from Cerro Prieto, Mexico

As part of a cooperative study with Dr. Alfred Truesdell, water samples collected from geothermal power production wells at Cerro Prieto, Mexico, were analyzed for selected elements by d.c. argon plasma emission spectroscopy. Spectral interferences due to the presence of high concentrations of Ca, Si, Na and K in these water affected the apparent concentration values obtained. These effects were evaluated and correction techniques were developed and applied to the analytical values. Precipitates present in the samples at the time of analysis adversely affected the accuracy, precision and interpretability of the data. (USGS)

Water-Resources Investigations Report↗

AQUIFEM-SALT; a finite-element model for aquifers containing a seawater interface

Described are modifications to AQUIFEM, a finite element areal ground-water flow model for aquifer evaluation. The modified model, AQUIFEM-SALT, simulates an aquifer containing a freshwater body that freely floats on seawater. Parts of the freshwater lens may be confined above and below by less permeable units. Theory, code modifications, and model verification are discussed. A modified input data list is included. This report is intended as a companion to the original AQUIFEM documentation. (USGS)

Water-Resources Investigations Report↗

Finite-element simulation of ground-water flow in the vicinity of Yucca Mountain, Nevada-California

A finite-element model of the groundwater flow system in the vicinity of Yucca Mountain at the Nevada Test Site was developed using parameter estimation techniques. The model simulated steady-state ground-water flow occurring in tuffaceous, volcanic , and carbonate rocks, and alluvial aquifers. Hydraulic gradients in the modeled area range from 0.00001 for carbonate aquifers to 0.19 for barriers in tuffaceous rocks. Three model parameters were used in estimating transmissivity in six zones. Simulated hydraulic-head values range from about 1,200 m near Timber Mountain to about 300 m near Furnace Creek Ranch. Model residuals for simulated versus measured hydraulic heads range from -28.6 to 21.4 m; most are less than +/-7 m, indicating an acceptable representation of the hydrologic system by the model. Sensitivity analyses of the model 's flux boundary condition variables were performed to assess the effect of varying boundary fluxes on the calculation of estimated model transmissivities. Varying the flux variables representing discharge at Franklin Lake and Furnace Creek Ranch has greater effect than varying other flux variables.

California, Nevada↗

A finite-element simulation model for saturated-unsaturated, fluid-density-dependent ground-water flow with energy transport or chemically- reactive single-species solute transport

SUTRA (Saturated-Unsaturated Transport) is a computer program which can be used to simulate the movement of fluid and the transport of either energy or dissolved substances in a subsurface environment. The model employs a two-dimensional hybrid finite-element and integrated-finite-difference method to approximate the governing equations that describe the two interdependent processes that are simulated by SUTRA: (1) fluid density-dependent saturated or unsaturated groundwater flow, and either (2a) transport of a solute in the groundwater, in which the solute may be subject to: equilibrium adsorption on the porous matrix, and both first-order and zero-order production or decay, or, (2b) transport of thermal energy in the groundwater and solid matrix of the aquifer. SUTRA provides, as the primary calculated results, fluid pressures and either solute concentrations or temperatures, as they vary with time, everywhere in the simulated subsurface system. SUTRA may also be used to simulate simpler subsets of the above process. SUTRA may be employed for areal and cross-sectional models of saturated groundwater flow systems, and for cross-sectional models of unsaturated zone flow. Solute transport simulation using SUTRA may be used to simulate natural or man-induced chemical transport, solute sorption, production and decay. SUTRA may be used for simulation of variable density leachate movement, and for cross-sectional simulation of salt-water intrusion in aquifers at near-well or regional scales, with either dispersed or relatively sharp transition zones between fresh water and salt water. SUTRA energy transport simulation may be employed to model thermal regimes in aquifers, subsurface heat conduction, aquifer thermal energy storage systems, geothermal reservoirs, thermal pollution of aquifers, and natural hydrogeologic convection systems. (USGS)

Water-Resources Investigations Report↗

A finite-element model for simulating hydraulic interchange of surface and ground water

A model was developed to be useful for predicting changes in streamflow as a result of groundwater pumping. The stream aquifer model is especially useful for simulating streams that flow intermittently owing to leakage to the aquifer or diversion for irrigation or streams that become perched owing to declining hydraulic head in the aquifer. The model couples the equation of two-dimensional groundwater flow with the kinematic equations of one-dimensional open-channel flow. Darcy 's law for vertical flow through a semipermeable streambed is used to couple the groundwater flow and streamflow equations. The equations of flow are approximated numerically by the finite-element method. A listing of the Fortran program that solves the equations of flow , and a description of data-input formats are given in the report. The program can simulate a variety of hydrologic characteristics including perched streams, streamflow diversions , springs, recharge from irrigated acreage, and evapotranspiration from the water table and phreatophytes. Time-dependent boundary conditions can be simulated. The program can be modified easily to simulate unconfined aquifers and aquifers with variable directions of anisotropy. (USGS)

Water-Resources Investigations Report↗

Summary of information on synthetic organic compounds and trace elements in tissue of aquatic biota, Clark Fork-Pend Oreille and Spokane River basins, Montana, Idaho, and Washington, 1974-96

As part of the Northern Rockies Intermontane Basins study of the National Water-Quality Assessment Program, data collected between 1974 and 1996 were compiled to describe contaminants in tissue of riverine species. Tissue-contaminant data from 11 monitoring programs and studies representing 28 sites in the study area were summarized. Tissue-contaminant data for most streams generally were lacking. Many studies have focused on and around mining-affected areas on the Clark Fork and Coeur d'Alene Rivers and their major tributaries. DDT and PCBs and their metabolites and congeners were the synthetic organic contaminants most commonly detected in fish tissue. Fish collected from the Spokane River in Washington contained elevated concentrations of PCB arochlors, some of which exceeded guidelines for the protection of human health and predatory wildlife. Tissue samples of fish from the Flathead River watershed contained higher-than-expected concentrations of PCBs, which might have resulted from atmospheric transport. Trace element concentrations in fish and macroinvertebrates collected in and around mining areas were elevated compared with background concentrations. Some cadmium, copper, lead, and mercury concentrations in fish tissue were elevated compared with results from other studies, and some exceeded guidelines. Macroinvertebrates from the Coeur d'Alene River contained higher concentrations of cadmium, lead, and zinc than did macroinvertebrates from other river systems in mining-affected areas. A few sportfish fillet samples, most from the Spokane River in Washington, were collected to assess human health risk. Concentrations of PCBs in these fillets exceeded screening values for the protection of human health. At present, there is no coordinated, long-term fish tissue monitoring program for rivers in the study area, even though contaminants are present in fish at levels considered a threat to human health. Development of a coordinated, centralized national data base for contaminants in fish tissue is needed. The National Water-Quality Assessment Program can provide a framework for other agencies to evaluate tissue contaminants in the Northern Rockies Intermontane Basins study area. As of 1996, there are no fish consumption advisories or fishing restrictions as a result of elevated contaminants on any rivers within the study area.

Idaho, Montana, Washington↗

Analysis of nutrients, selected inorganic constituents, and trace elements in water from Illinois community-supply wells, 1984–91

The lower Illinois River Basin (LIRB) study unit is part of the National Water-Quality Assessment program that includes studies of most major aquifer systems in the United States. Retrospective water-quality data from community-supply wells in the LIRB and in the rest of Illinois are grouped by aquifer and depth interval. Concentrations of selected chemical constituents in water samples from community-supply wells within the LIRB vary with aquifer and depth of well. Ranked data for 16 selected trace elements and nutrients are compared by aquifer, depth interval, and between the LIRB and the rest of Illinois using nonparametric statistical analyses. For all wells, median concentrations of nitrate and nitrite (as Nitrogen) are highest in water samples from the Quaternary aquifer at well depths less than 100 ft; ammonia concentrations (as Nitrogen), however, are highest in samples from well depths greater than 200 ft. Chloride and sulfate concentrations are higher in samples from the older bedrock aquifers. Arsenic, lead, sulfate, and zinc concentrations are appreciably different between samples from the LIRB and samples from the rest of Illinois for ground water from the Quaternary aquifer. Arsenic concentration is highest in the deep Quaternary aquifer. Chromium, cyanide, lead, and mercury are not frequently detected in water samples from community-supply wells in Illinois.

Illinois↗

A Galerkin finite-element flow model to predict the transient response of a radially symmetric aquifer

A computer program developed to evaluate radial flow of ground water, such as at a pumping well, recharge basin, or injection well, is capable of simulating anisotropic, inhomogenous, confined, or pseudo-unconfined (constant saturated thickness) conditions. Results compare well with those calculated from published analytical and model solutions. The program is based on the Galerkin finite-element technique. A sample model run is presented to illustrate the use of the program; supplementary material provides the program listing as well as a sample problem data set and output. From the text and other material presented, one can use the program to predict drawdowns from pumping and ground-water buildups from recharge in a radially symmetric ground-water system.

Water Supply Paper↗

Composition and trace element content of coal in Taiwan

To investigate the trace element contents of local coal, four coal samples were collected from operating mines in NW Taiwan. Detailed petrographic and chemical characterization analyses were then conducted. Analytical results indicate that (1) the samples were high volatile bituminous coal in rank with ash content ranging from 4.2 to 14.4% and with moisture content ranging from 2.7 to 4.6%; (2) the macerals were mostly composed of vitrinite with vitrinite reflectance less than 0.8%; (3) the sample of Wukeng mine has the highest Fe 2 O 3 (29.5%), Tl (54.8 ppm), Zn (140 ppm), and As (697 ppm) contents in ash and Hg (2.3 ppm) in the coal. If used properly, these coals should not present health hazards.

Terrestrial, Atmospheric and Oceanic Sciences↗

Influence of organic matter thermal maturity on rare earth element distribution: A study of Middle Devonian black shales from the Appalachian Basin, USA

This study focuses on understanding the association of rare earth elements (REE; lanthanides + yttrium + scandium) with organic matter from the Middle Devonian black shales of the Appalachian Basin. Developing a better understanding of the role of organic matter (OM) and thermal maturity in REE partitioning may help improve current geochemical models of REE enrichment in a wide range of black shales. We studied relationships between whole rock REE content and total organic carbon (TOC) and compared the correlations with a suite of global oil shales that contain TOC as high as 60 wt.%. The sequential leaching of the Appalachian shale samples was conducted to evaluate the REE content associated with carbonates, Fe–Mn oxyhydroxides, sulfides, and organics. Finally, the residue from the leaching experiment was analyzed to assess the mineralogical changes and REE extraction efficiency. Our results show that heavier REE (HREE) have a positive correlation with TOC in our Appalachian core samples. However, data from the global oil shales display an opposite trend. We propose that although TOC controls REE enrichment, thermal maturation likely plays a critical role in HREE partitioning into refractory organic phases, such as pyrobitumen. The REE inventory from a core in the Appalachian Basin shows that (1) the total REE ranges between 180 and 270 ppm and the OM-rich samples tend to contain more REE than the calcareous shales; (2) there is a relatively higher abundance of middle REE (MREE) to HREE than lighter REE (LREE); (3) there is a disproportionate increase in Y and Tb with TOC likely due to the rocks being over-mature; and (4) the REE extraction demonstrates that although the OM has higher HREE concentration, the organic leachates contain more LREE, suggesting it is more challenging to extract HREE from OM than using traditional leaching techniques.

Middle Devonian Appalachian Basin↗

Tungsten skarn quantitative mineral resource assessment and gold, rare earth elements, graphite, and uranium qualitative assessments of the Kuldjuktau and Auminzatau Ranges, in the central Kyzylkum region, Uzbekistan

A new quantitative mineral resource assessment for tungsten skarn was conducted for the Auminzatau and Kuldjuktau mountain ranges in Central Uzbekistan, along with qualitative assessments of orogenic gold, rare earth elements (REEs), amorphous graphite, and uranium. By integrating a variety of geological, geochemical, geophysical, and remote sensing data sets, estimates of undiscovered tungsten skarn deposits in permissive tracts are combined with grade and tonnage distributions of known deposits to generate probabilistic estimates of undiscovered resources. Undiscovered deposits in Auminzatau are estimated to contain median resources of 98 thousand metric tons (kt) of WO 3 with a 70 percent (%) probability of at least 28 kt and a 10% probability of at least 468 kt, of which 16 kt to 293 kt may be economic to extract. In Kuldjuktau, the undiscovered deposits are estimated to contain median resources of 27 kt of WO 3 with a 60% probability of at least 12 kt and a 10% probability of at least 208 kt, of which 5 kt to 132 kt may be economic to extract. Our results suggest that the Auminzatau–Kuldjuktau Mountains area is highly prospective for additional discovery of significant Au and U resources and has low prospectivity for discovery of significant REE and graphite resources.

Minerals↗

Marine phosphorites as potential resources for heavy rare earth elements and yttrium

Marine phosphorites are known to concentrate rare earth elements and yttrium (REY) during early diagenetic formation. Much of the REY data available are decades old and incomplete, and there has not been a systematic study of REY distributions in marine phosphorite deposits that formed over a range of oceanic environments. Consequently, we initiated this study to determine if marine phosphorite deposits found in the global ocean host REY concentrations of high enough grade to be of economic interest. This paper addresses continental-margin (CM) and open-ocean seamount phosphorites. All 75 samples analyzed are composed predominantly of carbonate fluorapatite and minor detrital and authigenic minerals. CM phosphorites have low total REY contents (mean 161 ppm) and high heavy REY (HREY) complements (mean 49%), while seamount phosphorites have 4–6 times higher individual REY contents (except for Ce, which is subequal; mean ΣREY 727 ppm), and very high HREY complements (mean 60%). The predominant causes of higher concentrations and larger HREY complements in seamount phosphorites compared to CM phosphorites are age, changes in seawater REY concentrations over time, water depth of formation, changes in pH and complexing ligands, and differences in organic carbon content in the depositional environments. Potential ore deposits with high HREY complements, like the marine phosphorites analyzed here, could help supply the HREY needed for high-tech and green-tech applications without creating an oversupply of the LREY.

Minerals↗

Coordination of planetary coordinate system recommendations by the IAU Working Group on Cartographic Coordinates and Rotational Elements–2020 status and future

Our goal is to request input from the lunar and planetary community regarding issues of planetary coordinate systems and cartography standards. We begin with an overview of the work of the International Astronomical Union Working Group on Cartographic Coordinates and Rotational Elements. We briefly describe the operations and membership of the Working Group, some of the various uses of the recommendations it makes, our most recent (2018) published report and the recommendations therein, and the outlook for our next such report. We then consider several issues and questions regarding the future of the Working Group and regarding planetary cartography and planetary data spatial infrastructure in general. This includes possible near-term projects, how we and others might collect and consider community input and includes some ideas regarding possible outcomes or future work that will need to be addressed by the Working Group or other organizations.

Conference Paper↗

A recently discovered trachyte-hosted rare earth element-niobium-zirconium occurrence in northern Maine, USA

Reported here are geological, geophysical, mineralogical, and geochemical data on a previously unknown trachyte-hosted rare earth element (REE)-Nb-Zr occurrence at Pennington Mountain in northern Maine, USA. This occurrence was newly discovered by a regional multiparameter, airborne radiometric survey that revealed anomalously high equivalent Th (eTh) and U (eU), confirmed by a detailed ground radiometric survey and by portable X-Ray fluorescence (pXRF) and whole-rock analyses of representative rock samples. The mineralized area occurs within an elongate trachyte body (~1.2 km 2 ) that intrudes Ordovician volcanic rocks. Geologic constraints suggest that the trachyte is also Ordovician in age. The eastern lobe (~900 × ~400 m) of the trachyte is pervasively brecciated with a matrix containing seams, lenses, and veinlets composed mainly of potassium feldspar, albite, and fine-grained zircon and monazite. Barite is locally abundant. Minor minerals within the matrix include columbite, bastnäsite, euxenite, chlorite, pyrite, sphalerite, and magnetite. The pXRF analyses of 22 samples (App. Table A1) collected from the eastern lobe demonstrate that this entire part of the trachyte is highly mineralized. Whole-rock geochemical analyses for samples from the eastern lobe document high average contents of Zr (1.17 wt %), Nb (1,656 ppm), Ba (3,132 ppm), Y (1,140 ppm), Hf (324 ppm), Ta (122 ppm), Th (124 ppm), U (36.5 ppm), Zn (689 ppm), and Sn (106 ppm). Among light REE, the highest average concentrations are shown by La (763 ppm) and Ce (1,479 ppm). For heavy REE (HREE), Dy and Er are the most abundant on average (167 and 114 ppm, respectively). No HREE-rich minerals such as xenotime have been identified; the HREE may reside chiefly in monazite and bastnäsite, and within the fine-grained zircon. Very strong positive correlations (R 2 ) of 0.92 to 0.98 exist between Th and Zr, Nb, Y, Ce, Yb, and Sn, indicating that the radiometric data for eTh are valid proxies for concentrations of these metals in the mineralized rocks.

Maine↗

A blood survey of elements, viral antibodies, and hemoparasites in wintering Harlequin Ducks (Histrionicus histrionicus) and Barrow's Goldeneyes (Bucephala islandica)

Twenty-eight Harlequin Ducks (Histrionicus histrionicus) and 26 Barrow's Goldeneyes (Bucephala islandica) were captured in Prince William Sound, Alaska, between 1 and 15 March 2005. Blood was collected for quantification of element concentrations, prevalence of antibodies to several viruses, and hemoparasite prevalence and identification. Although we found selenium concentrations that have been associated with selenosis in some birds (???.0 ppm ww), our findings contribute to a growing literature describing relatively high selenium in apparently healthy birds in marine environments. Avian influenza virus antibodies were detected in the plasma of 28% of the ducks. No antibodies against adenovirus, reovirus, or paramyxovirus 1 were detected. Several hemoparasite species were identified in 7% of ducks. Our findings are similar to those in other free-living marine waterfowl and do not indicate unusual concerns for the health of these species in this area in late winter. ?? Wildlife Disease Association 2008.

Alaska↗

I. Thermal evolution of Ganymede and implications for surface features. II. Magnetohydrodynamic constraints on deep zonal flow in the giant planets. III. A fast finite-element algorithm for two-dimensional photoclinometry

The work is divided into three independent papers: PAPER I: Thermal evolution models are presented for Ganymede, assuming a mostly differentiated initial state of a water ocean overlying a rock layer. The only heat sources are assumed to be primordial heat (provided by accretion) and the long-lived radiogenic heat sources in the rock component. As Ganymede cools, the ocean thins, and two ice layers develop, one above composed of ice I, and the other below composed of high-pressure polymorphs of ice. Subsolidus convection proceeds separately in each ice layer, its transport of heat calculated using a simple parameterized convection scheme and the most recent data on ice rheology. The model requires that the average entropy of the deep ice layer exceed that of the ice I layer. If the residual ocean separating these layers becomes thin enough, then a Rayleigh-Taylor-like ("diapiric") instability may ensue, driven by the greater entropy of the deeper ice and merging the two ice mantles into a single convective layer. This instability is not predicted by linear analysis but occurs for plausible finite amplitude perturbations associated with large Rayleigh number convection. The resulting warm ice diapirs may lead to a dramatic "heat pulse" at the surface and to fracturing of the lithosphere, and may be directly or indirectly responsible for resurfacing and grooved terrain formation on Ganymede. The timing of this event depends rather sensitively on poorly known rheological parameters but could be consistent with chronologies deduced from estimated cratering rates. Irrespective of the occurrence or importance of the heat pulse, we find that lithospheric fracturing requires rapid stress loading (on a timescale ≾ 10 4 ) years). Such a timescale can be realized by warm ice diapirism, but not directly by gradual global expansion. In the absence of any quantitative and self-consistent model for the resurfacing of Ganymede by liquid water, we favor resurfacing by warm ice flows,which we demonstrate to be physically possible, a plausible consequence of our models, compatible with existing observations, and a hypothesis testable by Galileo. We discuss core formation as an alternative driver for resurfacing, and conclude that it is less attractive. We also consider anew the puzzle of why Callisto differs so greatly from Ganymede, offering several possible explanations. The models presented do not provide a compelling explanation for all aspects of Ganymedean geological evolution, since we have identified several potential problems, most notably the apparently extended period of grooved terrain formation (several hundred million years), which is difficult to reconcile with the heat pulse phenomenon. PAPER II: The observed zonal flows of the giant planets will, if they penetrate below the visible atmosphere, interact significantly with the planetary magnetic field outside the metalized core. The appropriate measure of this interaction is the Chandrasekhar number Q = ( H 2 )/(4πρνα 2 λ) (where H = radial component of the magnetic field, ν = eddy viscosity, λ = magnetic diffusivity, α -1 = lengthscale on which λ varies); at depths where Q ≳ 1 the velocity will be forced to oscillate on a small lengthscale or decay to zero. We estimate the conductivity due to semiconduction in H 2 (Jupiter, Saturn) and ionization in H 2 O (Uranus, Neptune) as a function of depth; the value λ ≃ 10 10 cm 2 s -1 needed for Q = 1 is readily obtained well outside the metallic core (where λ ≃ 10 2 cm 2 s -1 ). These assertions are quantified by a simple model of the equatorial zonal jet in which the flow is assumed uniform on cylinders concentric with the spin axis, and the viscous and magnetic torques on each cylinder are balanced. We solve this "Taylor constraint" simultaneously with the dynamo equation to obtain the velocity and magnetic field in the equatorial plane. With this model we reproduce the widely differing jet widths of Jupiter and Saturn (though not the flow at very high or low latitudes) using ν = 2500 cm 2 s -1 , consistent with the requirement that viscous dissipation not exceed the specific luminosity. A model Uranian jet consistent with the limited Voyager data can also be constructed, with appropriately smaller ν, but only if one assumes a two-layer interior. We tentatively predict a wide Neptunian jet. For Saturn (but not Jupiter or Uranus) the model has a large magnetic Reynolds number where Q = 1 and hence exhibits substantial axisymmetrization of the field in the equatorial plane . This effect may or may not persist at higher latitudes. The one-dimensional model presented is only a first step. Variation of the velocity and magnetic field parallel to the spin axis must be modeled in order to answer several important questions, including: 1) What is the behavior of flows at high latitudes, whose Taylor cylinders are interrupted by the region with Q ≳ 1? 2) To what extent is differential rotation in the envelope responsible for the spin-axisymmetry of Saturn's magnetic field? PAPER III: It is shown that the problem of two-dimensional photoclinometry (PC) -- the reconstruction of a surface z ( x , y ) from a brightness image B( x , y ) -- may be formulated in a natural way in terms of finite elements. The resulting system of equations is underdetermined as a consequence of the lack of boundary conditions for z , but a unique solution may be chosen by minimizing a function S expressing the "roughness" of the surface. An efficient PC algorithm based on this formulation is presented, requiring ~ 10.66 (four-byte) memory locations and ~10 4 floating multiplications/additions per pixel, and incorporating: 1) Minimization of the roughness by the penalty method, which yields the smallest set of equations. 2) Iterative solution of the nonlinear equations by Newton's method. 3) Solution of the linearized equations by an inner iterative cycle of successive over-relaxation, which takes advantage of the extreme sparseness of the system. 4) Multigridding, in which the solutions to the smaller problems obtained by reducing the resolution are used recursively to greatly speed convergence at the higher resolutions, and 5) A rapid noniterative initial estimate of z obtained by exploiting the special symmetry of the equations obtained in the first linearization. The algorithm is extensively demonstrated on 200 by 200 pixel synthetic "images" generated from digital topographic data for northern Utah over a range of phase angles. Rms error in the solution is ~ 22 m, out of ~ 660 m total relief. The error is dominated by "stripes" with the same azimuth as the light source, resulting from use of the roughness criterion in lieu of boundary conditions; the rms error along profiles parallel to the stripes is only ~ 2-8 m, depending on the phase angle. Satisfactory solutions are obtained even in the presence of quantization error, noise, and moderate blur in the image. Applications of the PC algorithm to both remote sensing and photomicrography are sketched; a photoclinometric map of a low-relief Precambrian era fossil is presented as an example of the latter. Prospects for dealing with photometrically inhomogeneous surfaces, and an extension of the method to the analysis of side-looking radar data ("radarclinometry") are also discussed.

Thesis↗