Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Atlantic Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources

Shoreface translation and the Holocene stratigraphic record: Examples from Nova Scotia, the Mississippi Delta and eastern Australia

Classic descriptive models of barrier sedimentation have been developed with data from the Atlantic and Gulf coasts of the United States. These models are dominated by low to moderate rates of relative sea level (RSL) rise and wave energy. Barriers respond by landward recycling of sediment through the mechanism of shoreface retreat. Sedimentation processes on the central coast of New South Wales (N.S.W.), Australia, consist of rapid RSL rise in early Holocene times followed by a stillstand since 6500 B.P. Wave energy is relatively high year-round and sand sources for barrier formation are only found on the inner shelf. Barrier sedimentation on the central coast of N.S.W. exhibits a thick, composite sequence composed of a basal marine transgressive sand overlain by regressive beach and dune facies. The Louisiana coast surrounding the Mississippi delta is underlain by compacting deltaic muds which generate very rapid rates of RSL rise. The Louisiana coast experiences low wave energy punctuated by high-energy tropical and extra-tropical storm events. Barrier sediments accumulate from the erosion of deltaic headlands and undergo a transformation from subaerial barrier island systems to subaqueous shoals located on the inner shelf. Drumlins experience coastal erosion on the Eastern Shore of Nova Scotia and provide a sediment source for compartmented estuary mouth barriers. An ongoing, moderate rise of RSL results from the passage of a glacial forebulge. Wave energy is intermediate between Louisiana and N.S.W. and displays a seasonal pattern dominated by frequent winter storms. Coastal barrier sedimentation is episodic, consisting of a period of beach ridge progradation followed by barrier destruction and re-establishment further landward. The three contrasting sedimentary sequences found in examples from Louisiana, N.S.W. and Nova Scotia indicate that presently available sedimentation models from locations such as the middle Atlantic or Texas coasts of the United States may only represent well-documented regional case studies. A true generalised coastal sedimentation model is required which can identify the parameters controlling vertical and horizontal translation of the depositional surface and provide relationships between these parameters which quantitatively predict the genesis, distribution and geometry of coastal sedimentary facies.

Marine Geology↗

Geologic framework of the offshore region adjacent to Delaware

Several multichannel, common depth point (CDP) seismic reflection profiles concentrated in the area of the entrance to Delaware Bay provide a tie between the known onshore geology of the Coastal Plain of Delaware and the offshore geology of the Baltimore Canyon Trough. The data provide a basis for understanding the geologic framework and petroleum resource potential of the area immediately offshore Delaware. Our research has focused on buried early Mesozoic rift basins and their geologic history. Assuming that the buried basins are analogous to the exposed Newark Supergroup basins of Late Triassic-Early Jurassic age, the most likely possibility for occurrence of hydrocarbon source beds in the area of the landward margin of the Baltimore Canyon Trough is presumed to be lacustrine, organic-rich shales probably present in the basins. Although buried basins mapped offshore Delaware are within reach of drilling, no holes have been drilled to date; therefore, direct knowledge of source, reservoir, and sealing beds is absent. Buried rift basins offshore Delaware show axial trends ranging from NW-SE to NNE-SSW. Seismic reflection profiles are too widely spaced to delineate basin boundaries accurately. Isopleths of two-way travel time representing basin fill suggest that, structurally, the basins are grabens and half-grabens. As shown on seismic reflection profiles, bounding faults of the basins intersect or merge with low-angle fault surfaces that cut the pre-Mesozoic basement. The rift basins appear to have formed by Mesozoic extension that resulted in reverse motion on reactivated basement thrust faults that originated from compressional tectonics during the Paleozoic. Computer-plotted structure contour maps derived from analysis of seismic reflection profiles provide information on the burial history of the rift basins. The postrift unconformity bevels the rift basins and, in the offshore area mapped, ranges from 2000 to 12,000 m below present sea level. The oldest postrift sediments that cover the more deeply buried rift basins are estimated to be of Middle Jurassic age (Bajocian-Bathonian), the probable time of opening of the Atlantic Ocean basin and onset of continental drift about 175–180 m.y. ago. By late Oxfordian-early Kimmeridgian time, the less deeply buried basins nearshore Delaware had been covered. A time-temperature index of maturity plot of one of the basins indicates that only dry gas would be present in reservoirs in synrift rocks buried by more than 6000 m of postrift sediments and in the oldest (Bathonian?-Callovian?) postrift rocks. Less deeply buried synrift rocks landward of the basin modeled might still be within the oil generation window.

Marine Geology↗

Morphologic evolution of the wilderness area breach at Fire Island, New York—2012–15

Introduction Hurricane Sandy, which made landfall on October 29, 2012, near Atlantic City, New Jersey, had a significant impact on the coastal system along the south shore of Long Island, New York. A record significant wave height of 9.6 meters (m) was measured at wave buoy 44025 , approximately 48 kilometers offshore of Fire Island, New York. Surge and runup during the storm resulted in extensive beach and dune erosion and breaching of the Fire Island barrier island system at two locations, including a breach that formed within the Otis Pike Fire Island High Dune Wilderness area on the eastern side of Fire Island. The U.S. Geological Survey (USGS) has a long history of conducting morphologic change and processes research at Fire Island. One of the primary objectives of the current research effort is to understand the morphologic evolution of the barrier system on a variety of time scales (from storm scale to decade(s) to century). A number of studies that support the project objectives have been published. Prior to Hurricane Sandy, however, little information was available on specific storm-driven change in this region. The USGS received Hurricane Sandy supplemental funding (project GS2–2B: Linking Coastal Processes and Vulnerability, Fire Island, New York, Regional Study) to enhance existing research efforts at Fire Island. The existing research was greatly expanded to include inner continental shelf mapping and investigations of processes of inner shelf sediment transport; beach and dune response and recovery; and observation, analysis, and modeling of the newly formed breach in the Otis Pike High Dune Wilderness area, herein referred to as the wilderness breach. The breach formed at the site of Old Inlet, which was open from 1763 to 1825. The location of the initial island breaching does not directly correspond with topographic lows of the dunes, but instead the breach formed in the location of a cross-island boardwalk that was destroyed during Hurricane Sandy. From 2013 to November 2015, bathymetric data were collected by the USGS St. Petersburg Coastal and Marine Science Center during three surveys of the breach channel and tidal shoals, and shoreline positions on each side of the breach (also collected by the National Park Service). Additionally, pre-storm topography/bathymetry EAARL–B light detection and ranging (lidar) data were collected by the USGS the day prior to Hurricane Sandy’s landfall. These data serve as a baseline for change analyses during four subsequent periods: June 2013, June 2014, October 2014, and May 2015. The June 2013 single-beam bathymetry data were collected in collaboration with the U.S. Army Corps of Engineers (USACE), using the Lighter Amphibious Resupply Cargo (LARC) vessel, and included the ebb shoal and breach channel. The USGS collected and processed the three additional bathymetric datasets using personal watercraft equipped with single-beam echo sounders and backpack Global Positioning System (GPS) over shallow flood shoals. Eastern and western breach shorelines were surveyed weekly to monthly beginning on November 6, 2012 (by the National Park Service [NPS], and USGS St. Petersburg Coastal and Marine Science Center), with measurements made every few weeks for the first year and every few months after October 2013. The NPS and researchers from Stony Brook University monitored the breach by collecting field data of the breach channel bathymetry, conducting aerial photographic overflights, and performing water-quality analyses (see http://po.msrc.sunysb.edu/GSB/ ). The aerial photography collected and rectified by Stony Brook University is used extensively in our morphologic change description to examine changes to breach shorelines (supplementing shoreline data collected in the field), channel width, and orientation. Due to the uncertainties and the variation in survey methods, a rigorous quantitative analysis was not performed. However, average calculations of various breach metrics allow a qualitative analysis of breach development and evolution. This report presents an overview of the data collected and a summary discussion of the observed changes to the breach system and the seasonal wave climatology associated with the breach morphodynamic response.

New York↗

Geophysical observations on northern part of Georges Bank and adjacent basins of Gulf of Maine

Continuous-seismic-reflection and magnetic-intensity profiles provide data for inferences about the geology of the northern part of Georges Bank and the basins of the Gulf of Maine adjacent to the bank. Basement is inferred to be mostly sedimentary and volcanic rocks of Paleozoic age that were metamorphosed and intruded locally by felsic and mafic plutons near the end of the Paleozoic Era. During Late Triassic time, large fault basins formed within the Gulf of Maine and probably beneath Georges Bank. The fault basins and a possible major northeast-trending fault zone beneath the northern part of the bank probably formed as a result of the opening Atlantic during the Mesozoic. Nonmarine sediments, associated with mafic flows and intrusive rocks, were deposited in the fault basins as they formed. The upper surface of the Triassic and pre-Triassic rocks that comprise basement is an unconformity that makes up much of the bottom of the Gulf of Maine. Depth to the basement surface beneath the gulf differ greatly because of fluvial erosion in Tertiary time and glacial erosion in Pleistocene time. Beneath the northern part of Georges Bank the basement surface is smoother and slopes southward. Prominent valleys, cut before Late Cretaceous time, are present beneath this part of the bank. Cretaceous, Tertiary, and possibly Jurassic times were characterized by episodes of coastal-plain deposition and fluvial erosion. During this time a very thick wedge of sediment, mostly of Jurassic(?) and Cretaceous ages, was deposited on the shelf. Major periods of erosion took place at the close of the Cretaceous and during the Pliocene. Fluvial erosion during the Pliocene removed much of the coastal-plain sedimentary wedge and formed the Gulf of Maine. Pleistocene glaciers eroded all but a few remnants of the coastal-plain sediments within the gulf and deposited a thick section of drift against the north slope of Georges Bank and a thin veneer of outwash on the bank. Marine sediments were deposited in the basins of the Gulf of Maine during the retreat of the last ice and the postglacial rise in sea level.

Georges Bank, Gulf Of Maine↗

Petroleum exploration plays and resource estimates, 1989, onshore United States; Region 1, Alaska; Region 2, Pacific Coast

This study provides brief discussions of the petroleum geology, play descriptions, and resource estimates of 220 individually assessed exploration plays in all 80 onshore geologic provinces within nine assessment regions of the continental United States in 1989; these 80 onshore provinces were assessed in connection with the determination of the Nation's estimated undiscovered resources of oil and gas. The present report covers the 25 provinces that make up Region 1, Alaska, and Region 2, Pacific Coast. It is our intention to issue Region 3, Colorado Plateau and Basin and Range, and Region 4, Rocky Mountains and Northern Great Plains, in book form as well. Regions 5 through 9 (West Texas and Eastern New Mexico, Gulf Coast, Midcontinent, Eastern Interior and Atlantic Coast) will be released individually, as Open-File Reports.

Bulletin↗

History of the topographic branch (division)

From a very early period of the world's existence, man has endeavored to represent the earth's surface in a graphic form for the information of his fellow men, realizing that no oral or written description is capable of setting forth topographic facts so vividly and so clearly as a map. Mapping of the areas of the United States began with the charting of portions of its coast line by early explorers; the need for topographic maps was first recognized during the war of the Colonies for independence from Great Britain. On July 22, 1777, Congress authorized General Washington to appoint: 'Mr. Robert Erskine, or any other person that he may think proper, geographer and surveyor of the roads, to take sketches of the country and the seat of war.' By several acts during the Revolutionary War, Congress provided 'geographers' for the armies of the United States, some of them with the pay of a colonel, amounting to $60 a month and allowances. At the end of the War, a resolution of May 27, 1785, continued in service the 'geographer of the United States' for a period of 3 years. The War Department recognized the necessity of 'geographical engineers' and requested Congress to authorize their appointment, but it was not until the next war that Congress authorized on March 3, 1813, the appointment of eight topographic engineers and eight assistant topographic engineers under the direction of the General Staff of the Army. These officers formed the nucleus of the first Corps of Topographic Engineers in the Army, and that Corps continued to function as an independent unit until it was absorbed by the Corps of Engineers in 1863, during the Civil War between the States. Between the Louisiana Purchase in 1803, and the outbreak of the Civil War, more than a hundred exploring and mapping expeditions were sent into the vast territory lying west of the Mississippi River to investigate the natural resources of this newly acquired country and to find possible locations for wagon roads to the Pacific Coast. These expeditions were sent out by the War Department and were in charge of Army officers. It is interesting to note that such generals as George G. Meade, J.C. Fremont, Joseph E. Johnston, W.F. Smith, John Pope, A.W. Whipple, J.G. Parke, G.K. Warren, and H.L. Abbott, all officers of the Corps of Topographic Engineers, had charge of expeditions and were among our earliest map makers. Unfortunately, the data obtained by these editions were not of sufficient accuracy to serve as a basis for topographic maps of value other than in illustrating their voluminous reports. During this early period, numerous surveys were undertaken within the original Thirteen States, by the Federal government and by the States. The most important were those carried on by the U.S. Coast and Geodetic Survey, which made an accurate survey of the Atlantic Coastline and established a triangulation system that was of so high a standard as to constitute the first and only accurate data for topographic mapping obtained before the Civil War. The Coast and Geodetic Survey, while charting the coast and rivers, also mapped a strip of country extending a few miles inland, the relief being shown by means of hachures, together with contour lines, until 1846 when the first government topographic map on which the relief was shown by contours alone was made, covering an area in the vicinity of Boston Harbor. In 1835, however, the Geological and Topographical Survey of Maryland had issued a map on which the relief was shown by contours, and this is believed to be the first contoured map issued in this country. The outbreak of the Civil War stopped all mapping activities other than those needed by the U.S. Army. During the war, topographic surveys were carried on throughout the war zone under the supervision of the Corps of Engineers, the topographers being civilian employees. After the war, the country west of the Mississippi again became the center of the mapping activities

Circular↗

Bathymetry at the head of the Cape Fear Slide, offshore North Carolina

The Cape Fear Slide is the largest mass-movement that has been observed on the U.S. Atlantic Margin. It is located off the Carolinas on the continental rise in approximately 1,200-5,500 m water depth and extends downslope for over 300 km (Popenoe, 1982). These maps show the bathymetry at the head of the Cape Fear Slide as interpreted from single-channel 3.5 kHz seismic-reflection profiles and mid-range Sea Marc I sidescan sonar imagery (Popenoe, 1985; Popenoe and others, 1991; Schmuck, 1991). The 3.5 kHz data consist of over 1000 km of profiles that were collected in 1988 for the University of North Carolina, Department of Geology. The UNC 3.5 kHz data were used as the main data set in interpreting the bathymetry. The sidescan sonar data were collected in 1980 by the U.S. Geological Survey in cooperation with the Lamont-Doherty Geological Observatory for the U.S. Bureau of Land Management Environmental Studies Program. Only 28 km (5 km swath width) of the sidescan data were used in the interpretation to identify the morphology of the main slump scarp and visible secondary scarps.

North Carolina↗

Well network installation and hydrogeologic data collection, Assateague Island National Seashore, Worcester County, Maryland, 2010

The U.S. Geological Survey, as part of its Climate and Land Use Change Research and Development Program, is conducting a multi-year investigation to assess potential impacts on the natural resources of Assateague Island National Seashore, Maryland that may result from changes in the hydrologic system in response to projected sea-level rise. As part of this effort, 26 monitoring wells were installed in pairs along five east-west trending transects. Each of the five transects has between two and four pairs of wells, consisting of a shallow well and a deeper well. The shallow well typically was installed several feet below the water table—usually in freshwater about 10 feet below land surface (ft bls)—to measure water-level changes in the shallow groundwater system. The deeper well was installed below the anticipated depth to the freshwater-saltwater interface—usually in saltwater about 45 to 55 ft bls—for the purpose of borehole geophysical logging to characterize local differences in lithology and salinity and to monitor tidal influences on groundwater. Four of the 13 shallow wells and 5 of the 13 deeper wells were instrumented with water-level recorders that collected water-level data at 15-minute intervals from August 12 through September 28, 2010. Data collected from these instrumented wells were compared with tide data collected north of Assateague Island at the Ocean City Inlet tide gage, and precipitation data collected by National Park Service staff on Assateague Island. These data indicate that precipitation events coupled with changes in ambient sea level had the largest effect on groundwater levels in all monitoring wells near the Atlantic Ocean and Chincoteague and Sinepuxent Bays, whereas precipitation events alone had the greatest impact on shallow groundwater levels near the center of the island. Daily and bi-monthly tidal cycles appeared to have minimal influence on groundwater levels throughout the island and the water-level changes that were observed appeared to vary among well sites, indicating that changes in lithology and salinity also may affect the response of water levels in the shallow and deeper groundwater systems throughout the island. Borehole geophysical logs were collected at each of the 13 deeper wells along the 5 transects. Electromagnetic induction logs were collected to identify changes in lithology; determine the approximate location of the freshwater-saltwater interface; and characterize the distribution of fresh and brackish water in the shallow aquifer, and the geometry of the fresh groundwater lens beneath the island. Natural gamma logs were collected to provide information on the geologic framework of the island including the presence and thickness of finer-grained deposits found in the subsurface throughout the island during previous investigations. Results of this investigation show the need for collection of continuous water-level data in both the shallow and deeper parts of the flow system and electromagnetic induction and natural gamma geophysical logging data to better understand the response of this groundwater system to changes in precipitation and tidal forcing. Hydrologic data collected as part of this investigation will serve as the foundation for the development of numerical flow models to assess the potential effects of climate change on the coastal groundwater system of Assateague Island.

Maryl↗

Application of the Graphic Correlation method to Pliocene marine sequences

Biostratigraphy — the use of paleontological evidence to establish relative chronologies, forms the cornerstone of many sedimentary geological investigations. Several different approaches to biochronology are available. Traditional interval zones, defined on lowest and/or highest occurrences of selected taxa, are used to place bodies of rock in a relative chronological framework. Fossil datum levels, which are more numerous than zones, are often used as chronohorizons for correlation purposs. The Graphic Correlation method, like interval zonations, synthesizes information from a number of different taxa but does not assume synchrony of any one taxon. A magnetobiostratigraphic model for deep-sea Pliocene sequences has been constructed by graphic correlation of Deep Sea Drilling project cores from the North Atlantic (606), Caribbean Sea (502), South Atlantic (516), Tasman Sea (590), Equatorial Pacific (573) and North Pacific (577). All cores are hydraulic piston cores which contain abundant planktonic foraminifers, calcareous nannofossils and which record many of the magnetic reversals expected in the Pliocene. The model is based on internally consistent paleontologic data gathered by the author. This study demonstrates the advantages of graphic correlation over conventional biostratigraphic procedures. Accurate inter-regional correlations can be made between core sites without resorting to multiple microfossil zonations and without invoking synchrony of fossil events. Important results of this study are: (1) many Pliocene planktonic foraminifer and calcareous nannofossil events are diachronous by more than 0.20 m.y., (2) Globorotalia truncatulinoides first occurs in the Southwest Pacific Ocean, approximately 0.50 m.y. earlier than previously reported, (3) a previously undetected hiatus of short duration (0.38 m.y.) exists just above the Cochiti subchron at DSDP 577A.

Marine Micropaleontology↗

Spatial distribution of the largest rainfall‐runoff floods from basins between 2.6 and 26,000 km2 in the United States and Puerto Rico

We assess the spatial distribution of the largest rainfall‐generated streamflows from a database of 35,663 flow records composed of the largest 10% of annual peak flows from each of 14,815 U.S. Geological Survey stream gaging stations in the United States and Puerto Rico. High unit discharges (peak discharge per unit contributing area) from basins with areas of 2.6 to 26,000 km 2 (1–10,000 mi 2 ) are widespread, but streams in Hawaii, Puerto Rico, and Texas together account for more than 50% of the highest unit discharges. The Appalachians and western flanks of Pacific coastal mountain systems are also regions of high unit discharges, as are several areas in the southern Midwest. By contrast, few exceptional discharges have been recorded in the interior West, northern Midwest, and Atlantic Coastal Plain. Most areas of high unit discharges result from the combination of (1) regional atmospheric conditions that produce large precipitation volumes and (2) steep topography, which enhances precipitation by convective and orographic processes and allows flow to be quickly concentrated into stream channels. Within the conterminous United States, the greatest concentration of exceptional unit discharges is at the Balcones Escarpment of central Texas, where maximum U.S. rainfall amounts apparently coincide with appropriate basin physiography to produce many of the largest measured U.S. floods. Flood‐related fatalities broadly correspond to the spatial distribution of high unit discharges, with Texas having nearly twice the average annual flood‐related fatalities of any other state.

Water Resources Research↗

Assessment of tsunami hazard to the U.S. East Coast using relationships between submarine landslides and earthquakes

Submarine landslides along the continental slope of the U.S. Atlantic margin are potential sources for tsunamis along the U.S. East coast. The magnitude of potential tsunamis depends on the volume and location of the landslides, and tsunami frequency depends on their recurrence interval. However, the size and recurrence interval of submarine landslides along the U.S. Atlantic margin is poorly known. Well-studied landslide-generated tsunamis in other parts of the world have been shown to be associated with earthquakes. Because the size distribution and recurrence interval of earthquakes is generally better known than those for submarine landslides, we propose here to estimate the size and recurrence interval of submarine landslides from the size and recurrence interval of earthquakes in the near vicinity of the said landslides. To do so, we calculate maximum expected landslide size for a given earthquake magnitude, use recurrence interval of earthquakes to estimate recurrence interval of landslide, and assume a threshold landslide size that can generate a destructive tsunami. The maximum expected landslide size for a given earthquake magnitude is calculated in 3 ways: by slope stability analysis for catastrophic slope failure on the Atlantic continental margin, by using land-based compilation of maximum observed distance from earthquake to liquefaction, and by using land-based compilation of maximum observed area of earthquake-induced landslides. We find that the calculated distances and failure areas from the slope stability analysis is similar or slightly smaller than the maximum triggering distances and failure areas in subaerial observations. The results from all three methods compare well with the slope failure observations of the M w = 7.2, 1929 Grand Banks earthquake, the only historical tsunamigenic earthquake along the North American Atlantic margin. The results further suggest that a M w = 7.5 earthquake (the largest expected earthquake in the eastern U.S.) must be located offshore and within 100??km of the continental slope to induce a catastrophic slope failure. Thus, a repeat of the 1755 Cape Anne and 1881 Charleston earthquakes are not expected to cause landslides on the continental slope. The observed rate of seismicity offshore the U.S. Atlantic coast is very low with the exception of New England, where some microseismicity is observed. An extrapolation of annual strain rates from the Canadian Atlantic continental margin suggests that the New England margin may experience the equivalent of a magnitude 7 earthquake on average every 600-3000??yr. A minimum triggering earthquake magnitude of 5.5 is suggested for a sufficiently large submarine failure to generate a devastating tsunami and only if the epicenter is located within the continental slope.

Marine Geology↗

Caribbean mangroves adjust to rising sea level through biotic controls on change in soil elevation

Aim The long-term stability of coastal ecosystems such as mangroves and salt marshes depends upon the maintenance of soil elevations within the intertidal habitat as sea level changes. We examined the rates and processes of peat formation by mangroves of the Caribbean Region to better understand biological controls on habitat stability. Location Mangrove-dominated islands on the Caribbean coasts of Belize, Honduras and Panama were selected as study sites. Methods Biological processes controlling mangrove peat formation were manipulated (in Belize) by the addition of nutrients (nitrogen or phosphorus) to Rhizophora mangle (red mangrove), and the effects on the dynamics of soil elevation were determined over a 3-year period using rod surface elevation tables (RSET) and marker horizons. Peat composition and geological accretion rates were determined at all sites using radiocarbon-dated cores. Results The addition of nutrients to mangroves caused significant changes in rates of mangrove root accumulation, which influenced both the rate and direction of change in elevation. Areas with low root input lost elevation and those with high rates gained elevation. These findings were consistent with peat analyses at multiple Caribbean sites showing that deposits (up to 10 m in depth) were composed primarily of mangrove root matter. Comparison of radiocarbon-dated cores at the study sites with a sea-level curve for the western Atlantic indicated a tight coupling between peat building in Caribbean mangroves and sea-level rise over the Holocene. Main conclusions Mangroves common to the Caribbean region have adjusted to changing sea level mainly through subsurface accumulation of refractory mangrove roots. Without root and other organic inputs, submergence of these tidal forests is inevitable due to peat decomposition, physical compaction and eustatic sea-level rise. These findings have relevance for predicting the effects of sea-level rise and biophysical processes on tropical mangrove ecosystems.

Caribbean Sea↗

The south Florida environment: A region under stress

This report provides an overview of the environmental setting in South Florida and serves as review and framework for developing U.S. Geological Survey programs in the region. The report describes the predevelopment and the current (present-day) environmental conditions in South Florida with emphasis on the quantity and quality of water. The geographical area covered is the southern one-half of the State and includes the South Florida National Water-Quality Assessment study area and adjacent coastal waters. This study area covers about 19,500 square miles and is the watershed of the larger regional ecosystem. The regional ecosystem includes the coastal waters between Charlotte Harbor on the Gulf of Mexico and the St. Lucie River on the Atlantic Ocean and the lands that drain into these waters.

Florida↗

Catastrophic meltwater discharge down the Hudson Valley: A potential trigger for the Intra-Allerød cold period

Glacial freshwater discharge to the Atlantic Ocean during deglaciation may have inhibited oceanic thermohaline circulation, and is often postulated to have driven climatic fluctuations. Yet attributing meltwater-discharge events to particular climate oscillations is problematic, because the location, timing, and amount of meltwater discharge are often poorly constrained. We present evidence from the Hudson Valley and the northeastern U.S. continental margin that establishes the timing of the catastrophic draining of Glacial Lake Iroquois, which breached the moraine dam at the Narrows in New York City, eroded glacial lake sediments in the Hudson Valley, and deposited large sediment lobes on the New York and New Jersey continental shelf ca. 13,350 yr B.P. Excess 14 C in Cariaco Basin sediments indicates a slowing in thermohaline circulation and heat transport to the North Atlantic at that time, and both marine and terrestrial paleoclimate proxy records around the North Atlantic show a short-lived (<400 yr) cold event (Intra-Allerød cold period) that began ca. 13,350 yr B.P. The meltwater discharge out the Hudson Valley may have played an important role in triggering the Intra-Allerød cold period by diminishing thermohaline circulation.

Geology↗

Volcanoes of the passive margin: The youngest magmatic event in eastern North America

The rifted eastern North American margin (ENAM) provides important clues to the long-term evolution of continental margins. An Eocene volcanic swarm exposed in the Appalachian Valley and Ridge Province of Virginia and West Virginia (USA) contains the youngest known igneous rocks in the ENAM. These magmas provide the only window into the most recent deep processes contributing to the postrift evolution of this margin. Here we present new 40 Ar/ 39 Ar ages, geochemical data, and radiogenic isotopes that constrain the melting conditions and the timing of emplacement. Modeling of the melting conditions on primitive basalts yielded an average temperature and pressure of 1412 ± 25 °C and 2.32 ± 0.31 GPa, corresponding to a mantle potential temperature of ∼1410 °C, suggesting melting conditions slightly higher than average mantle temperatures beneath mid-ocean ridges. When compared with magmas from Atlantic hotspots, the Eocene ENAM samples share isotopic signatures with the Azores and Cape Verde. This similarity suggests the possibility of a large-scale dissemination of similar sources in the upper mantle left over from the opening of the Atlantic Ocean. Asthenosphere upwelling related to localized lithospheric delamination is a possible process that can explain the intraplate signature of these magmas that lack evidence of a thermal anomaly. This process can also explain the Cenozoic dynamic topography and evidence of rejuvenation of the central Appalachians.

Geology↗

Cost analysis of ground-water supplies in the North Atlantic region, 1970

The cost of municipal and industrial ground water (or, more specifically, large supplies of ground water) at the wellhead in the North Atlantic Region in 1970 generally ranged from 1.5 to 5 cents per thousand gallons. Water from crystalline rocks and shale is relatively expensive. Water from sandstone is less so. Costs of water from sands and gravels in glaciated areas and from Coastal Plain sediments range from moderate to very low. In carbonate rocks costs range from low to fairly high. The cost of ground water at the wellhead is low in areas of productive aquifers, but owing to the cost of connecting pipe, costs increase significantly in multiple-well fields. In the North Atlantic Region, development of small to moderate supplies of ground water may offer favorable cost alternatives to planners, but large supplies of ground water for delivery to one point cannot generally be developed inexpensively. Well fields in the less productive aquifers may be limited by costs to 1 or 2 million gallons a day, but in the more favorable aquifers development of several tens of millions of gallons a day may be practicable and inexpensive. Cost evaluations presented cannot be applied to any one specific well or specific site because yields of wells in any one place will depend on the local geologic and hydrologic conditions; however, with such cost adjustments as may be necessary, the methodology presented should have wide applicability. Data given show the cost of water at the wellhead based on the average yield of several wells. The cost of water delivered by a well field includes costs of connecting pipe and of wells that have the yields and spacings specified. Cost of transport of water from the well field to point of consumption and possible cost of treatment are not evaluated. In the methodology employed, costs of drilling and testing, pumping equipment, engineering for the well field, amortization at 5% percent interest, maintenance, and cost of power are considered. The report includes an analysis of test drilling costs leading to a production well field. The discussion shows that test drilling is a relatively low cost item and that more than a minimum of test holes in a previously unexplored area is, above all, simple insurance in keeping down costs and may easily result in final lower costs for the system. Use of the jet drill for testing is considered short sighted and may result in higher total costs and possibly failure to discover good aquifers. Economic development of ground water supplies will depend on obtaining qualified hydrologic and engineering advice, on carrying out adequate test drilling, and on utilizing high-quality (at times, more costly) material.

Water Supply Paper↗

Application of a multipurpose unequal probability stream survey in the Mid-Atlantic Coastal Plain

A stratified, spatially balanced sample with unequal probability selection was used to design a multipurpose survey of headwater streams in the Mid-Atlantic Coastal Plain. Objectives for the survey include unbiased estimates of regional stream conditions, and adequate coverage of unusual but significant environmental settings to support empirical modeling of the factors affecting those conditions. The design and field application of the survey are discussed in light of these multiple objectives. A probability (random) sample of 175 first-order nontidal streams was selected for synoptic sampling of water chemistry and benthic and riparian ecology during late winter and spring 2000. Twenty-five streams were selected within each of seven hydrogeologic subregions (strata) that were delineated on the basis of physiography and surficial geology. In each subregion, unequal inclusion probabilities were used to provide an approximately even distribution of streams along a gradient of forested to developed (agricultural or urban) land in the contributing watershed. Alternate streams were also selected. Alternates were included in groups of five in each subregion when field reconnaissance demonstrated that primary streams were inaccessible or otherwise unusable. Despite the rejection and replacement of a considerable number of primary streams during reconnaissance (up to 40 percent in one subregion), the desired land use distribution was maintained within each hydrogeologic subregion without sacrificing the probabilistic design.

Journal of the American Water Resources Associatio↗

Changes in distribution of Canada geese nesting in Arkansas

The reintroduced Canada goose ( Branta canadensis ) population in Arkansas has grown in range and abundance in recent decades. We determined the geographic range of Arkansas resident Canada geese from 2004 to 2012 using volume contour maps from citizen science observations using eBird, a citizen science website, and hunter recovery locations from the U.S. Geological Survey Bird Banding Laboratory. Resulting maps indicate an increase in Canada goose encounters toward northwestern and southwestern Arkansas from the original relocations in the Arkansas River valley. We examined movement of Canada geese banded and recovered in Arkansas by determining the distance and angle of movement between initial and final encounter locations; 25% moved east, and 17% went west. The average distance moved from banding to recovery was 50 km (SE = 1 km). Recoveries of Canada geese banded in Arkansas were greatest in the Mississippi Flyway (58% of all geese) followed by the Central Flyway (37%) with some representation in both the Atlantic (4%) and Pacific flyways (0.9%). Movement from Arkansas to other states and Canada was influenced by goose age and sex. Older individuals traveled longer distances than younger ones, and females traveled longer distances than males. Our findings suggest that recently established Canada geese in Arkansas have slowly expanded within the state to the northwest and southwest with the expansion to the east being important now. Movement of Arkansas resident Canada geese on molt-migration can contribute to management issues in other states and provinces.

Arkansas↗