Results for “Sedimentary Geology” — Page 40

USGS2020

Spectral inversion for seismic site response in central Oklahoma: Low-frequency resonances from the Great Unconformity

We investigate seismic site response by inverting seismic ground‐motion spectra for site and source spectral properties, in a region of central Oklahoma, where previous ground‐motion studies have indicated discrepancies between observations and ground‐motion models (GMMs). The inversion is constrained by a source spectral model, which we computed from regional seismic records, using aftershocks as empirical Green’s functions to deconvolve site and path effects. Site spectra across the region exhibit multiple, strong, low‐frequency ( ⁠ f <2 Hz ⁠ ) resonances. Modeling of vertically propagating SH waves reproduces the mean amplitudes and frequencies of the site spectra and requires a deep ( ⁠ ∼1–2 km ⁠ ) impedance contrast. Comparison of regional seismic velocity models and geologic profiles indicates that the seismic impedance contrast is, or is in proximity to, the Great Unconformity, which marks the interface between Precambrian basement rocks and overlying Paleozoic sedimentary rocks. Depth to Precambrian basement increases to the southwest across the study region ( ⁠ ∼1500–4500 m ⁠ ), and the fundamental frequencies of the site spectra are anticorrelated with basement depth. The first higher‐mode resonance also exhibits dependence on basement depth; although modeling suggests that the second higher mode should depend on basement depth, site spectra do not support this. The low‐frequency resonances in central Oklahoma are not represented in the GMMs used in current seismic hazard analyses for tectonic earthquakes, though approaches to account for such features are under consideration in other regions of the central and eastern United States. Given the broad spatial extent of the Great Unconformity underlying eastern North America, it is likely that similar effects on seismic site response also occur in other areas. This study highlights the impact of regional geologic structure on earthquake ground motions and reiterates the need for modeling regional effects to improve ground‐motion predictions and seismic hazard assessments.

Oklahoma↗

USGS1989

Geology and water resources of Owens Valley, California

Owens Valley, a long, narrow valley located along the east flank of the Sierra Nevada in east-central California, is the main source of water for the city of Los Angeles. The city diverts most of the surface water in the valley into the Owens River-Los Angeles Aqueduct system, which transports the water more than 200 miles south to areas of distribution and use. Additionally, ground water is pumped or flows from wells to supplement the surface-water diversions to the river-aqueduct system. Pumpage from wells needed to supplement water export has increased since 1970, when a second aqueduct was put into service, and local concerns have been expressed that the increased pumpage may have had a detrimental effect on the environment and the indigenous alkaline scrub and meadow plant communities in the valley. The scrub and meadow communities depend on soil moisture derived from precipitation and the unconfined part of a multilayered aquifer system. This report, which describes the hydrogeology of the aquifer system and the water resources of the valley, is one in a series designed to (1) evaluate the effects that ground-water pumping has on scrub and meadow communities and (2) appraise alternative strategies to mitigate any adverse effects caused by pumping. Two principal topographic features are the surface expression of the geologic framework--the high, prominent mountains on the east and west sides of the valley and the long, narrow intermountain valley floor. The mountains are composed of sedimentary, granitic, and metamorphic rocks, mantled in part by volcanic rocks as well as by glacial, talus, and fluvial deposits. The valley floor is underlain by valley fill that consists of unconsolidated to moderately consolidated alluvial fan, glacial and talus, and fluvial and lacustrine deposits. The valley fill also includes interlayered recent volcanic flows and pyroclastic rocks. The bedrock surface beneath the valley fill is a narrow, steep-sided graben that is structurally separated into the Bishop Basin to the north and the Owens Lake Basin to the south. These two structural basins are separated by (1) a bedrock high that is the upper bedrock block of an east-west normal fault, (2) a horst block of bedrock (the Poverty Hills), and (3) Quaternary basalt flows and cinder cones that intercalate and intrude the sedimentary deposits of the valley fill. The resulting structural separation of the basins allowed separate development of fluvial and lacustrine depositional systems in each basin. Nearly all the ground water in Owens Valley flows through and is stored in the saturated valley fill. The bedrock, which surrounds and underlies the valley fill, is virtually impermeable. Three hydrogeologic units compose the valley-fill aquifer system, a defined subdivision of the ground-water system, and a fourth represents the valley fill below the aquifer system and above the bedrock. The aquifer system is divided into horizontal hydrogeologic units on the basis of either (1) uniform hydrologic characteristics of a specific lithologic layer or (2) distribution of the vertical hydraulic head. Hydrogeologic unit 1 is the upper unit and represents the unconfined part of the system, hydrogeologic unit 2 represents the confining unit (or units), and hydrogeologic unit 3 represents the confined part of the aquifer system. Hydrogeologic unit 4 represents the deep part of the ground-water system and lies below the aquifer system. Hydrogeologic unit 4 transmits or stores much less water than hydrogeologic unit 3 and represents either a moderately consolidated valley fill or a geologic unit in the valley fill defined on the basis of geophysical data. Nearly all the recharge to the aquifer system is from infiltration of runoff from snowmelt and rainfall on the Sierra Nevada. In contrast, little recharge occurs to the system by runoff from the White and Inyo Mountains or from direct precipitation on the valley floor. Ground water flows from the margins of the valley towards the center of the valley; the ground water then flows south to the terminus of the system at Owens (dry) Lake. Ground water flows south from Bishop Basin to Owens Lake Basin through the narrows that constrict the flow opposite Poverty Hills. The aquifer system in the northern half of Owens Lake Basin is divided into east and west halves by the barrier effect caused by the Owens Valley fault. Discharge from the aquifer system is primarily by pumpage and evapotranspiration, and to a lesser extent by flowing wells, springs, underflow, and leakage to the Owens River-Los Angeles aqueduct system. Withdrawals from pumped or flowing wells is the largest component of discharge and accounts for about 50 percent of the outflow from the system. Transpiration by scrub and meadow plant communities, and to a lesser extent by irrigated alfalfa pasture, accounts for about 40 percent of the system's discharge. Natural hydraulic conductivity ranges from less than 400 to about 12,000 feet per day in the basalt flows, the more permeable material in the aquifer system. Where the basalts are fractured by explosives and drilling techniques, actual transmissivities can be greater than 1,000,000 feet squared per day. Hydraulic conductivities in sedimentary deposits of the aquifer system range from less than a few feet per day in lacustrine clays to more than 300 feet per day in gravel stringers and beach deposits in the transition zone between alluvial fan deposits and fluvial and lacustrine deposits. Degree of confinement in the aquifer system generally increases to the south and east in both the Bishop and Owens Lake Basins. The vertical hydraulic gradient across hydrogeologic unit 2 and confining beds in hydrogeologic units 1 and 3 is a function of (1) the asymmetric recharge and hydraulic head created by the dominant recharge from Sierra Nevada runoff and (2) the areal extent and thickness of the confining beds. Although most of the pumpage is from hydrogeologic unit 3, some coincident drawdown has been recorded in nonpumped wells that tap unit 1. Drawdown in hydrogeologic unit 1 is a function of changes in (1) lateral flow through hydrogeologic unit 1, (2) upward flow of ground water through the confining beds, (3) downward leakage of water from hydrogeologic unit 1 to unit 3 through wells, (4) direct withdrawal from well intervals open to hydrogeologic unit 1, and (5) increased evapotranspiration. The water in the aquifer system is generally of excellent quality for public supply and irrigation, with the exception of water stored in thick sequences of lacustrine silts and clays near Owens Lake. The water is principally a calcium bicarbonate type and dissolved-solids concentrations range from approximately 104 to 325 milligrams per liter. Water in the lacustrine sediments of Owens (dry) Lake is a sodium bicarbonate type and dissolved-solids concentrations are about 5,400 milligrams per liter.

California↗

USGS1993

Interactions of frazil and anchor ice with sedimentary particles in a flume

Frazil and anchor ice forming in turbulent, supercooled water have been studied extensively because of problems posed to man-made hydraulic structures. In spite of many incidental observations of interactions of these ice forms with sediment, their geologic effects remain unknown. The present flume study was designed to learn about the effects of salinity, current speed, and sediment type on sediment dynamics in supercooled water. In fresh-water, frazil ice formed flocs as large as 8 cm in diameter that tended to roll along a sandy bottom and collect material from the bed. The heavy flocs often came to rest in the shelter of ripples, forming anchor ice that subsequently was buried by migrating ripples. Burial compressed porous anchor ice into ice-bonded, sediment-rich masses. This process disrupts normal ripple cross-bedding and may produce unique sedimentary structures. Salt-water flocs were smaller, incorporated less bed load, and formed less anchor ice than their fresh-water counterparts. In four experiments, frazil carried a high sediment load only for a short period in supercooled salt water, but released it with slight warming. This suggests that salt-water frazil is either sticky or traps particles only while surrounded by supercooled water (0.05 to 0.1 °C supercooling), a short-lived phase in simple, small tanks. Salt water anchor ice formed readily on blocks of ice-bonded sediment, which may be common in nature. The theoretical maximum sediment load in neutrally-buoyant ice/sediment mixture is 122 g/l, never reported in nature so far. The maximum sediment load measured in this laboratory study was 88 g/l. Such high theoretical and measured sediment concentrations suggest that frazil and anchor ice are important sediment transport agents in rivers and oceans.

Cold Regions Science and Technology↗

USGS1954

Exploration for uranium deposits in the Spring Creek Mesa area, Montrose County, Colorado

The U.S. Geological Survey explored the Spring Creek Mesa area from July 11, 1951, to August 14, 1953. During that period, 280 diamond-drill holes were completed for a total of 180,287 feet. Sedimentary rocks of Mesozoic age are exposed in and adjacent to the Spring Creek Mesa area. These rocks consist of, from oldest to youngest: the Upper Jurassic Morrison formation, the Lower Cretaceous Burro Canyon formation, and the Upper Cretaceous Dakota formation. The Morrison formation consists of two members in the Spring Creek Mesa area: the lower is the Salt Wash member and the upper is the Brusby Basin member. All of the large uranium-bearing deposits discovered by the Geological Survey drilling in the Spring Creek Mesa area are in a series of coalescing sandstone lenses in the uppermost part of the Salt Wash member of the Morrison formation. Most of the ore deposits are believed to be irregular tabular or lens-shaped masses and probably lie parallel to the bedding, although in detail, they may crosscut the bedding. Also, ore deposits that take the form of narrow elongate concretionary-like structures, locally called “rolls”, may be present in the Spring Creek Mesa area. The mineralized material consists mostly of sandstone which has been selectively impregnated and in part replaced by uranium and vanadium minerals. Also, rich concentrations of uranium and vanadium are commonly associated with thin mudstone seams, beds of mudstone pebbles, and carbonaceous material of various types. Two suites of ore minerals are present in the ore deposits - - an oxidized suite of secondary uranium and vanadium minerals and a relatively unoxidized suite of “primary” uranium and vanadium minerals. The following geologic criteria are useful as guides to ore in the Spring Creek Mesa area: 1. Large ore deposits generally occur where the “ore-bearing sandstone” is more than 40 feet thick. 2. The color of the mudstone associated with the “ore-bearing sandstone” in the vicinity of large ore deposits is commonly gray instead of the usual red. 3. The “ore-bearing sandstone” is normally a light red, but in the vicinity of oxidized ore deposits it is light brown and in the vicinity of relatively unoxidized ore deposits it is gray. 4. The “ore-bearing sandstone” in the vicinity of relatively unoxidized ore deposits commonly contains sparse to abundant disseminated pyrite. In the vicinity of oxidized deposits it commonly contains abundant limonite spots and widespread limonite staining.

Colorado↗

USGS1987

Evolution and petroleum geology of Amlia and Amukta intra-arc summit basins, Aleutian Ridge

Amlia and Amukta Basins are the largest of many intra-arc basins formed in late Cenozoic time along the crest of the Aleutian Arc. Both basins are grabens filled with 2-5 km of arc-derived sediment. A complex system of normal faults deformed the basinal strata. Although initial deposits of late Micocene age may be non-marine in origin, by early Pliocene time, most of the basinfill consisted of pelagic and hemipelagic debris and terrigenous turbidite deposits derived from wavebase and subaerial erosion of the arc's crestal areas. Late Cenozoic volcanism along the arc commenced during or shortly after initial subsidence and greatly contributed to active deposition in Amlia and Amukta Basins. Two groups of normal faults occur: major boundary faults common to both basins and 'intra-basin' faults that arise primarily from arc-parallel extension of the arc. The most significant boundary fault, Amlia-Amukta fault, is a south-dipping growth fault striking parallel to the trend of the arc. Displacement across this fault forms a large half-graben that is separated into the two depocentres of Amlia and Amukta Basins by the formation of a late Cenozoic volcanic centre, Seguam Island. Faults of the second group reflect regional deformation of the arc and offset the basement floor as well as the overlying basinal section. Intra-basin faults in Amlia Basin are predominantly aligned normal to the trend of the arc, thereby indicating arc-parallel extension. Those in Amukta basin are aligned in multiple orientations and probably indicate a more complex mechanism of faulting. Displacement across intra-basin faults is attributed to tectonic subsidence of the massif, aided by depositional loading within the basins. In addition, most intra-basin faults are listric and are associated with high growth rates. Although, the hydrocarbon potential of Amlia and Amukta Basins is difficult to assess based on existing data, regional considerations imply that an adequate thermal history conducive to hydrocarbon generation has prevailed during the past 6-5 my. The possibility for source rocks existing in the lower sections of the basins is suggested by exposures of middle and upper Miocene carbonaceous mudstone on nearby Atka Island and the implication that euxinic conditions may have prevailed during the initial formation of the basins. Large structures have evolved to trap migrating hydrocarbons, but questions remain concerning the preservation of primary porosity in a sedimentary section rich in reactive volcaniclastic debris. ?? 1987.

Marine and Petroleum Geology↗

USGS2012

Geologic framework for the national assessment of carbon dioxide storage resources: Powder River Basin, Wyoming, Montana, South Dakota, and Nebraska: Chapter B in Geologic framework for the national assessment of carbon dioxide storage resources

This report presents ten storage assessment units (SAUs) within the Powder River Basin of Wyoming, Montana, South Dakota, and Nebraska. The Powder River Basin contains a thick succession of sedimentary rocks that accumulated steadily throughout much of the Phanerozoic, and at least three stratigraphic packages contain strata that are suitable for CO 2 storage. Pennsylvanian through Triassic siliciclastic strata contain two potential storage units: the Pennsylvanian and Permian Tensleep Sandstone and Minnelusa Formation, and the Triassic Crow Mountain Sandstone. Jurassic siliciclastic strata contain one potential storage unit: the lower part of the Sundance Formation. Cretaceous siliciclastic strata contain seven potential storage units: (1) the Fall River and Lakota Formations, (2) the Muddy Sandstone, (3) the Frontier Sandstone and Turner Sandy Member of the Carlile Shale, (4) the Sussex and Shannon Sandstone Members of Cody Shale, and (5) the Parkman, (6) Teapot, and (7) Teckla Sandstone Members of the Mesaverde Formation. For each SAU, we discuss the areal distribution of suitable CO 2 reservoir rock. We also characterize the overlying sealing unit and describe the geologic characteristics that influence the potential CO 2 storage volume and reservoir performance. These characteristics include reservoir depth, gross thickness, net thickness, porosity, permeability, and groundwater salinity. Case-by-case strategies for estimating the pore volume existing within structurally and (or) stratigraphically closed traps are presented. Although assessment results are not contained in this report, the geologic information included herein will be employed to calculate the potential storage space in the various SAUs.

Montana, Nebraska, South Dakota, Wyoming↗

USGS1961

Geologic summary of the Appalachian Basin, with reference to the subsurface disposal of radioactive waste solutions

The Appalachian basin is an elongate depression in the crystalline basement complex which contains a great volume of predominantly sedimentary stratified rocks. As defined in this paper it extends from the Adirondack Mountains in New York to central Alabama. From east to west it extends from the west flank of the Blue Ridge Mountains to the crest of the Findlay and Cincinnati arches and the Nashville dome. It encompasses an area of about 207,000 square miles, including all of West Virginia and parts of New York, New Jersey, Pennsylvania, Ohio, Maryland, Virginia, Kentucky, Tennessee, North Carolina, Georgia, and Alabama. The stratified rocks that occupy the basin constitute a wedge-shaped mass whose axis of greatest thickness lies close to and parallel to the east edge of the basin. The maximum thickness of stratified rocks preserved in any one part of the basin today is between 35,000 and 40,000 feet. The volume of the sedimentary rocks is approximately 510,000 cubic miles and of volcanic rocks is a few thousand cubic miles. The sedimentary rocks are predominantly Paleozoic in age, whereas the volcanic rocks are predominantly Late Precambrian. On the basis of gross lithology the stratified rocks overlying the crystalline basement complex can be divided into nine vertically sequential units, which are designated "sequences" in this report. The boundaries between contiguous sequences do not necessarily coincide with the commonly recognized boundaries between systems or series. All sequences are grossly wedge shaped, being thickest along the eastern margin of the basin and thinnest along the western margin. The lowermost unit the Late Precambrian stratified sequence is present only along part of the eastern margin of the basin, where it lies unconformably on the basement complex. It consists largely of volcanic tuffs and flows but contains some interbedded sedimentary rocks. The Late Precambrian sequence is overlain by the Early Cambrian clastic sequence. Where the older sequence is absent, the Early Cambrian sequence rests on the basement complex. Interbedded fine- to coarse-grained noncarbonate detrital rocks comprise the bulk of the sequence, but some volcanic and carbonate rocks are included. Next above is the Cambrian-Ordovician carbonate sequence which consists largely of limestone and dolomite. Some quartzose sandstone is present in the lower part in the western half of the basin, and much shale is present in the upper part in the southeast part of the basin. The next higher sequence is the Late Ordovician clastic sequence, which consists largely of shale, siltstone, and sandstone. Coarse-grained light-gray to red rocks are common in the sequence along the eastern side of the basin, whereas fine-grained dark-gray to black calcareous rocks are common along the west side. The Late Ordovician clastic sequence is overlain unconformably in many places by the Early Silurian clastic sequence. The latter comprises a relatively thin wedge of coarse-grained clastic rocks. Some of the most prolific oil- and gas-producing sandstones in the Appalachian basin are included. Among these are the "Clinton" sands of Ohio, the Medina Sandstones of New York and Pennsylvania, and the Keefer or "Big Six" Sandstone of West Virginia and Kentucky. Conformably overlying the Early Silurian clastic sequence is the Silurian-Devonian carbonate sequence, which consists predominantly of limestone and dolomite. It also contains a salt-bearing unit in the north-central part of the basin and a thick wedge of coarse-grained red beds in the northeastern part. The sequence is absent in much of the southern part of the basin. Large volumes of gas and much oil are obtained from some of its rocks, especially from the Oriskany Sandstone and the Huntersville Ghert. The Silurian-Devonian carbonate sequence is abruptly overlain by the Devonian clastic sequence a thick succession of interbedded shale, mudrock, siltstone, and sandstone. Colors range from predominantly purple and red in the northeastern part of the basin to predominantly dark gray and black in the southwestern part. Many rocks in the upper part contain hydrocarbons in commercial quantities. The next higher sequence is a heterogeneous succession that comprises most rocks of Mississippian age in the basin. It is composed largely of fine-grained to very coarse-grained noncalcareous clastic rocks in the northern half of the basin, and largely of carbonate rocks in the southern part. Large quantities of oil and gas are produced from the sequence. The youngest sequence consists of coarse-grained clastic rocks largely of Pennsylvanian age. In the center of the basin a relatively small volume of lithologically similar rocks of Permian age are included. The sequence has been intensively mined for coal throughout most of its extent. The waste-disposal possibilities of the stratified rocks in the Appalachian basin are considered in terms of the following: 1) gross lithology of the sequences; 2) general lithology of the rock units composing the sequences; and 3) the structural attitudes of the sequences in different parts of the basin. The degree of exploitation of economically significant mineral* resources is considered briefly where such exploitation may affect waste-disposal possibilities. Hydrologic aspects are not in general considered. Based largely on consideration of the above geologic factors the following types of reservoirs associated with particular geologic environments offer some prospects for the disposal of radioactive waste solutions. They are: 1) artificially created cavities in thick salt beds; 2) artificially fractured thin lenticular sandstone bodies isolated in shale or mudrock sequences; 3) portions of thick noncarbonate clastic sequences possessing appreciable natural porosity and permeability; 4) thin clastic units (with natural or artificially created openings) in the plate of a thrust fault overlain by impermeable strata. Considered in its entirety the Late Ordovician clastic sequence appears to have a greater number of favorable geologic factors for waste-disposal purposes than the others. The Early Silurian clastic sequence, the Silurian-Devonian carbonate sequence, and the Devonian clastic sequence offer fewer possibilities. The Late Precambrian stratified sequence, Early Cambrian, and the Cambrian-Ordovician carbonate sequence offer few possibilities. The Mississippian and Pennsylvanian sequences appear to be generally unsuitable.

Appalachian Basin↗

USGS1961

Geologic summary of the Appalachian basin, with reference to the subsurface disposal of radioactive waste solutions

The Appalachian basin is an elongate depression in the crystalline basement complex which contains a great volume of predominantly sedimentary stratified rocks. As defined in this paper it extends from the Adirondack Mountains in New York to central Alabama. From east to west it extends from the west flank of the Blue Ridge Mountains to the crest of the Findlay and Cincinnati arches and the Nashville dome. It encompasses an area of about 207,000 square miles, including all of West Virginia and parts of New York, New Jersey, Pennsylvania, Ohio, Maryland, Virginia, Kentucky, Tennessee, North Carolina, Georgia, and Alabama. The stratified rocks that occupy the basin constitute a wedge-shaped mass whose axis of greatest thickness lies close to and parallel to the east edge of the basin. The maximum thickness of stratified rocks preserved in any one part of the basin today is between 35,000 and 40,000 feet. The volume of the sedimentary rocks is approximately 510,000 cubic miles and of volcanic rocks is a few thousand cubic miles. The sedimentary rocks are predominantly Paleozoic in age, whereas the volcanic rocks are predominantly Late Precambrian. On the basis of gross lithology the stratified rocks overlying the crystalline basement complex can be divided into nine vertically sequential units, which are designated "sequences" in this report. The boundaries between contiguous sequences do not necessarily coincide with the commonly recognized boundaries between systems or series. All sequences are grossly wedge shaped, being thickest along the eastern margin of the basin and thinnest along the western margin. The lowermost unit the Late Precambrian stratified sequence is present only along part of the eastern margin of the basin, where it lies unconformably on the basement complex. It consists largely of volcanic tuffs and flows but contains some interbedded sedimentary rocks. The Late Precambrian sequence is overlain by the Early Cambrian clastic sequence. Where the older sequence is absent, the Early Cambrian sequence rests on the basement complex. Interbedded fine- to coarse-grained noncarbonate detrital rocks comprise the bulk of the sequence, but some volcanic and carbonate rocks are included. Next above is the Cambrian-Ordovician carbonate sequence which consists largely of limestone and dolomite. Some quartzose sandstone is present in the lower part in the western half of the basin, and much shale is present in the upper part in the southeast part of the basin. The next higher sequence is the Late Ordovician clastic sequence, which consists largely of shale, siltstone, and sandstone. Coarse-grained light-gray to red rocks are common in the sequence along the eastern side of the basin, whereas fine-grained dark-gray to black calcareous rocks are common along the west side. The Late Ordovician clastic sequence is overlain unconformably in many places by the Early Silurian clastic sequence. The latter comprises a relatively thin wedge of coarse-grained clastic rocks. Some of the most prolific oil- and gas-producing sandstones in the Appalachian basin are included. Among these are the "Clinton" sands of Ohio, the Medina Sandstones of New York and Pennsylvania, and the Keefer or "Big Six" Sandstone of West Virginia and Kentucky. Conformably overlying the Early Silurian clastic sequence is the Silurian-Devonian carbonate sequence, which consists predominantly of limestone and dolomite. It also contains a salt-bearing unit in the north-central part of the basin and a thick wedge of coarse-grained red beds in the northeastern part. The sequence is absent in much of the southern part of the basin. Large volumes of gas and much oil are obtained from some of its rocks, especially from the Oriskany Sandstone and the Huntersville Ghert. The Silurian-Devonian carbonate sequence is abruptly overlain by the Devonian clastic sequence a thick succession of interbedded shale, mudrock, siltstone, and sandstone. Colors range from predominantly purple and red in the northeastern part of the basin to predominantly dark gray and black in the southwestern part. Many rocks in the upper part contain hydrocarbons in commercial quantities. The next higher sequence is a heterogeneous succession that comprises most rocks of Mississippian age in the basin. It is composed largely of fine-grained to very coarse-grained noncalcareous clastic rocks in the northern half of the basin, and largely of carbonate rocks in the southern part. Large quantities of oil and gas are produced from the sequence. The youngest sequence consists of coarse-grained clastic rocks largely of Pennsylvanian age. In the center of the basin a relatively small volume of lithologically similar rocks of Permian age are included. The sequence has been intensively mined for coal throughout most of its extent. The waste-disposal possibilities of the stratified rocks in the Appalachian basin are considered in terms of the following: 1) gross lithology of the sequences; 2) general lithology of the rock units composing the sequences; and 3) the structural attitudes of the sequences in different parts of the basin. The degree of exploitation of economically significant mineral* resources is considered briefly where such exploitation may affect waste-disposal possibilities. Hydrologic aspects are not in general considered. Based largely on consideration of the above geologic factors the following types of reservoirs associated with particular geologic environments offer some prospects for the disposal of radioactive waste solutions. They are: 1) artificially created cavities in thick salt beds; 2) artificially fractured thin lenticular sandstone bodies isolated in shale or mudrock sequences; 3) portions of thick noncarbonate clastic sequences possessing appreciable natural porosity and permeability; 4) thin clastic units (with natural or artificially created openings) in the plate of a thrust fault overlain by impermeable strata. Considered in its entirety the Late Ordovician clastic sequence appears to have a greater number of favorable geologic factors for waste-disposal purposes than the others. The Early Silurian clastic sequence, the Silurian-Devonian carbonate sequence, and the Devonian clastic sequence offer fewer possibilities. The Late Precambrian stratified sequence, Early Cambrian, and the Cambrian-Ordovician carbonate sequence offer few possibilities. The Mississippian and Pennsylvanian sequences appear to be generally unsuitable.

Appalachian Basin↗

USGS2022

Hyperspectral remote sensing of white mica: A review of imaging and point-based spectrometer studies for mineral resources, with spectrometer design considerations

Over the past ~30 years, hyperspectral remote sensing of chemical variations in white mica have proven to be useful for ore deposit studies in a range of deposit types. To better understand mineral deposits and to guide spectrometer design, this contribution reviews relevant papers from the fields of remote sensing, spectroscopy, and geology that have utilized spectral changes caused by chemical variation in white micas. This contribution reviews spectral studies conducted at the following types of mineral deposits: base metal sulfide, epithermal, porphyry, sedimentary rock hosted gold deposits, orogenic gold, iron oxide copper gold, and unconformity-related uranium. The structure, chemical composition, and spectral features of white micas, in this contribution defined as muscovite, paragonite, celadonite, phengite, illite, and sericite, are given. Reviewed laboratory spectral studies determined that shifts in the position of the white mica 2200 nm combination feature of 1 nm correspond to a change in Al oct content of approximately ±1.05%. Many of the reviewed spectral studies indicated that a shift in the position of the white mica 2200 nm combination feature of 1 nm was geologically significant. A sensitivity analysis of spectrometer characteristics; bandpass, sampling interval, and channel position, is conducted using spectra of 19 white micas with deep absorption features to determine minimum characteristics required to accurately measure a shift in the position of the white mica 2200 nm combination feature. It was determined that a sampling interval < 16.3 nm and bandpass <17.5 nm are needed to achieve a root mean square error (RMSE) of 2 nm, whereas a sampling interval < 8.8 nm and bandpass <9.8 nm are needed to achieve a RMSE of 1 nm. For comparison, commonly used imaging spectrometers HyMap, AVIRIS-Classic, SpecTIR®'s AisaFENIX 1K, and HySpex tm SWIR 384 have 2.1, 1.2, 0.96, and 0.95 nm RMSE in determining the position of the 2200 nm white mica combination feature, respectively. An additional sensitivity analysis is conducted to determine the effect of signal to noise ratio (SNR) on the RMSE of the position of the white mica 2200 nm combination feature, using spectra of 18 white micas with deep absorption features. For a spectrometer with sampling interval and bandpass of 1 nm, we estimate that RMSEs of 1 and 1.5 nm are achievable with spectra having a minimum SNR of approximately 246 and 64, respectively. For a spectrometer with sampling interval and bandpass of 5 nm, we estimate that RMSEs of 1 and 1.5 nm are attainable with spectra having a minimum SNR of approximately 431 and 84, respectively. When using a spectrometer with a sampling interval 8.8 nm and a bandpass of 9.8 nm, a RMSE of 1 is only achievable with convolved, noiseless reference spectra. For the 8.8_9.8 nm spectrometer, spectra with SNR of 250 and 100 result in RMSE of 1.1 and 1.3, respectively. Therefore, fine spectral resolution characteristics achieve RMSEs better than 1 nm for high SNR spectra while spectrometers with coarse spectral resolution have larger RMSE, perform well with noisy data, and are useful for white mica studies if RMSE of 1.1 to 1.5 nm is acceptable.

Remote Sensing of Environment↗

USGS1985

Map showing abundance and distribution of silver in stream-sediment samples, Medford 1 degree by 2 degrees Quadrangle, Oregon-California

The Medford quadrangle is located in mountainous southwestern Oregon adjacent to the California border and a short distance east of the Pacific coast. Various parts of this area lie in different geologic provinces. Most of the western half of the quadrangle is underlain by pre-Tertiary rocks of the Klamath Mountains province. However, the Coast Range province is represented by the Tertiary sedimentary rocks in the northwest corner. Much of the eastern half of the quadrangle lies in the Cascade Range. In Oregon, because of differences in physiographic expression and age of rocks, this province is commonly divided into the more rugged High Cascade Range on the east and the more subdued Western Cascade Range on the west. This division is approximated on the map by the contact between the Quaternary and Tertiary volcanic rocks of the High Cascade Range and the Tertiary volcanic rocks of the Western Cascade Range. The geology shown is generalized from a more detailed compilation by Smith and others (1982).

Oregon↗

USGS1985

Map showing abundance and distribution of chromium in stream-sediment samples, Medford 1 degree by 2 degrees Quadrangle, Oregon-California

The Medford quadrangle is located in mountainous southwestern Oregon adjacent to the California border and a short distance east of the Pacific coast. Various parts of this area lie in different geologic provinces. Most of the western half of the quadrangle is underlain by pre-Tertiary rocks of the Klamath Mountains province. However, the Coast Range province is represented by the Tertiary sedimentary rocks in the northwest corner. Much of the eastern half of the quadrangle lies in the Cascade Range. In Oregon, because of differences in physiographic expression and age of rocks, this province is commonly divided into the more rugged High Cascade Range on the east and the more subdued Western Cascade Range on the west. This division is approximated on the map by the contact between the Quaternary and Tertiary volcanic rocks of the High Cascade Range and the Tertiary volcanic rocks of the Western Cascade Range. The geology shown is generalized from a more detailed compilation by Smith and others (1982).

Oregon↗

USGS2012

Spatial distribution of landslides triggered from the 2007 Niigata Chuetsu–Oki Japan Earthquake

Understanding the spatial distribution of earthquake-induced landslides from specific earthquakes provides an opportunity to recognize what to expect from future events. The July 16, 2007 M w 6.6 (M JMA 6.8) Niigata Chuetsu–Oki Japan earthquake triggered hundreds of landslides in the area surrounding the coastal city of Kashiwazaki and provides one such opportunity to evaluate the impacts of an offshore, magnitude 6 + earthquake on a steep coastal region. As part of a larger effort to document all forms of geotechnical damage from this earthquake, we performed landslide inventory mapping throughout the epicentral area and analyzed the resulting data for spatial, seismic-motion, and geologic correlations to describe the pattern of landsliding. Coupled with examination of a third-party, aerial-photo-based landslide inventory, our analyses reveal several areas of high landslide concentration that are not readily explained by either traditional epicentral and fault–plane-distance metrics or by recorded and inferred ground-motions. Whereas average landslide concentrations averaged less than 1 landslide per square kilometer (LS/km 2 ), some areas reached up to 2 LS/km 2 in the Nishiyama Hills to the northeast of Kashiwazaki and between 2 and 11 LS/km 2 in coastal areas to the north and south of the city. Correlation with seismometer-based and monument overturning back-calculated ground motions suggests that a minimum peak ground acceleration (PGA) of approximately 0.2 g was necessary for landsliding throughout the region, but does not explain the subregional areas of high landslide concentration. However, analysis of topographic slope and the distribution of generally weak, dip-slope, geologic units does sufficiently explain why, on a sub-regional scale, high landslide concentrations occurred where they did. These include: (1) an inland region of steep, dip-slope, anticlinal sedimentary strata with associated fold belt compression and uplift of the anticline and (2) coastal areas with generally weaker, weathered outcrop lithology and steeper slopes resulting from active marine and terrestrial cliff processes. The results offer lessons for understanding the effects of earthquakes on both regional and subregional scales with regard to the spatial distribution of landsliding.

Engineering Geology↗

USGS1999

Element concentrations in bed sediment of the Yellowstone River basin, Montana, North Dakota, and Wyoming — A retrospective analysis

Chemical data for bed sediment were analyzed as part of the U.S. Geological Survey National Water-Quality Assessment Program investigation of the Yellowstone River Basin in parts of Montana, North Dakota, and Wyoming. The primary data set consisted of about 13,000 samples collected during 1974-79 for the National Uranium Resource Evaluation program. Data were available for 50 elements, although not all samples were analyzed for all elements. Element concentrations varied spatially and were associated with geologic settings or ecoregions. Factor analysis indicated three groups of associated elements: factor 1 elements were strongly correlated with basaltic rocks, factor 2 elements were strongly correlated with granitic rocks, and factor 3 elements were strongly correlated with carbonate rocks. Scores for factor 1 were highest for bed-sediment samples associated with volcanic rocks of Tertiary and Cretaceous age in the Absaroka volcanic field and crystalline rocks of Precambrian age in the Beartooth Mountains. Scores for factor 2 were highest for samples associated with volcanic rocks of Quaternary age on the Yellowstone Plateau, crystalline rocks of Precambrian age, and sedimentary rocks of Tertiary age in the Wyoming Basin ecoregion. Scores for factor 3 were highest in samples associated with sedimentary rocks of Paleozoic age and volcanic rocks of Cretaceous and Tertiary age. Descriptive statistics are presented to serve as a baseline for element concentrations in bed sediment associated with eight geologic settings or ecoregions in the study unit. Some of the concentrations of chromium, copper, lead, nickel, and zinc in bed-sediment samples from areas of crystalline rocks in the Beartooth Mountains and other formations in the western part of the study unit exceeded sediment-quality assessment values associated with toxic effects to aquatic life.

Idaho, Montana, North Dakota, South Dakota, Wyomin↗

USGS1978

Refraction studies between Icy Bay and Kayak Island, eastern Gulf of Alaska

Results of five seismic refraction lines shot by the U.S. Geological Survey in the Gulf of Alaska between Icy Bay and Kayak Island indicate the following: (1) The Continental Shelf is underlain by as much as 11 km of sedimentary rock of probable Tertiary age where refraction velocities range from 1.2 to 5.5 kilometers per second; (2) a section approximately 5 km thick, which has velocities of 4.1-5.5 km/s and which could represent the Orca Group (lower Tertiary), is present in the western part of the study area but not in the eastern part; and (3) consistent basement velocities of approximately 7.0 km/s could indicate oceanic crust underlying the continental margin.

Alaska↗

USGS1991

Geology and water resources of Owens Valley, California

Owens Valley, a long, narrow valley located along the east flank of the Sierra Nevada in east-central California, is the main source of water for the city of Los Angeles. The city diverts most of the surface water in the valley into the Owens River-Los Angeles Aqueduct system, which transports the water more than 200 miles south to areas of distribution and use. Additionally, ground water is pumped or flows from wells to supplement the surface-water diversions to the river-aqueduct system. Pumpage from wells needed to supplement water export has increased since 1970, when a second aqueduct was put into service, and local concerns have been expressed that the increased pumpage may have had a detrimental effect on the environment and the indigenous alkaline scrub and meadow plant communities in the valley. The scrub and meadow communities depend on soil moisture derived from precipitation and the unconfined part of a multilayered aquifer system. This report, which describes the hydrogeology of the aquifer system and the water resources of the valley, is one in a series designed to (1) evaluate the effects that groundwater pumping has on scrub and meadow communities and (2) appraise alternative strategies to mitigate any adverse effects caused by, pumping. Two principal topographic features are the surface expression of the geologic framework--the high, prominent mountains on the east and west sides of the valley and the long, narrow intermountain valley floor. The mountains are composed of sedimentary, granitic, and metamorphic rocks, mantled in part by volcanic rocks as well as by glacial, talus, and fluvial deposits. The valley floor is underlain by valley fill that consists of unconsolidated to moderately consolidated alluvial fan, transition-zone, glacial and talus, and fluvial and lacustrine deposits. The valley fill also includes interlayered recent volcanic flows and pyroclastic rocks. The bedrock surface beneath the valley fill is a narrow, steep-sided graben that is structurally separated into the Bishop Basin to the north and the Owens Lake Basin to the south. These two structural basins are separated by (1) a bedrock high that is the upper bedrock block of an east-west normal fault, (2) a horst block of bedrock (the Poverty Hills), and (3) Quaternary basalt flows and cinder cones that intercalate and intrude the sedimentary deposits of the valley fill. The resulting structural separation of the basins allowed separate development of fluvial and lacustrine depositional systems in each basin. Nearly all the ground water in Owens Valley flows through and is stored in the saturated valley fill. The bedrock, which surrounds and underlies the valley fill, is virtually impermeable. Three hydrogeologic units compose the valley-fill aquifer system, a defined subdivision of the ground-water system, and a fourth represents the valley fill below the aquifer system and above the bedrock. The aquifer system is divided into horizontal hydrogeologic units on the basis of either (1) uniform hydrologic characteristics of a specific lithologic layer or (2) distribution of the vertical hydraulic head. Hydrogeologic unit 1 is the upper unit and represents the unconfined part of the system, hydrogeologic unit 2 represents the confining unit (or units), and hydrogeologic unit 3 represents the confined part of the aquifer system. Hydrogeologic unit 4 represents the deep part of the ground-water system and lies below the aquifer system. Hydrogeologic unit 4 transmits or stores much less water than hydrogeologic unit 3 and represents either a moderately consolidated valley fill or a geologic unit in the valley fill defined on the basis of geophysical data. Nearly all the recharge to the aquifer system is from infiltration of runoff from snowmelt and rainfall on the Sierra Nevada. In contrast, little recharge occurs to the system by runoff from the White and Inyo Mountains or from direct precipitation on the valley floor. Ground wat

Water Supply Paper↗

USGS2005

Field measurements of incision rates following bedrock exposure: Implications for process controls on the long profiles of valleys cut by rivers and debris flows

Until recently, published rates of incision of bedrock valleys came from indirect dating of incised surfaces. A small but growing literature based on direct measurement reports short-term bedrock lowering at geologically unsustainable rates. We report observations of bedrock lowering from erosion pins monitored over 1–7 yr in 10 valleys that cut indurated volcanic and sedimentary rocks in Washington, Oregon, California, and Taiwan. Most of these channels have historically been stripped of sediment. Their bedrock is exposed to bed-load abrasion, plucking, and seasonal wetting and drying that comminutes hard, intact rock into plates or equant fragments that are removed by higher flows. Consequent incision rates are proportional to the square of rock tensile strength, in agreement with experimental results of others. Measured rates up to centimeters per year far exceed regional long-term erosion-rate estimates, even for apparently minor sediment-transport rates. Cultural artifacts on adjoining strath terraces in Washington and Taiwan indicate at least several decades of lowering at these extreme rates. Lacking sediment cover, lithologies at these sites lower at rates that far exceed long-term rock-uplift rates. This rate disparity makes it unlikely that the long profiles of these rivers are directly adjusted to either bedrock hardness or rock-uplift rate in the manner predicted by the stream power law, despite the observation that their profiles are well fit by power-law plots of drainage area vs. slope. We hypothesize that the threshold of motion of a thin sediment mantle, rather than bedrock hardness or rock-uplift rate, controls channel slope in weak bedrock lithologies with tensile strengths below &sim;3–5 MPa. To illustrate this hypothesis and to provide an alternative interpretation for power-law plots of area vs. slope, we combine Shields' threshold transport concept with measured hydraulic relationships and downstream fining rates. In contrast to fluvial reaches, none of the hundreds of erosion pins we installed in steep valleys recently scoured to bedrock by debris flows indicate any postevent fluvial lowering. These results are consistent with episodic debris flows as the primary agent of bedrock lowering in the steepest parts of the channel network above &sim;0.03–0.10 slope.

California, Washington, Oregon↗

USGS1976

Regional geologic framework off northeastern United States

Six multichannel seismic-reflection profiles taken across the Atlantic continental margin off the northeastern United States show an excess of 14 km of presumed Mesozoic and younger sedimentary rocks in the Baltimore Canyon trough and 8 km in the Georges Bank basin. Beneath the continental rise, the sedimentary prism thickness exceeds 7 km south of New Jersey and Maryland, and it is 4.5 km thick south of Georges Bank. Stratigraphically, the continental slope–outer edge of the continental shelf is a transition zone of high-velocity sedimentary rock, probably carbonate, that covers deeply subsided basement. Acoustically, the sedimentary sequence beneath the shelf is divided into three units which are correlated speculatively with the Cenozoic, the Cretaceous, and the Jurassic-Triassic sections. These units thicken offshore, and some have increased seismic velocities farther offshore. The uppermost unit thickens from a fraction of a kilometer to slightly more than a kilometer in a seaward direction, and velocity values range from 1.7 to 2.2 km/sec. The middle unit thickens from a fraction of a kilometer to as much as 5 km (northern Baltimore Canyon trough), and seismic velocity ranges from 2.2 to 5.4 km/sec. The lowest unit thickens to a maximum of 9 km (northern Baltimore Canyon), and velocities span the 3.9 to 5.9-km/sec interval. The spatial separation of magnetic and gravity anomalies on line 2 (New Jersey) suggests that in the Baltimore Canyon region the magnetic-slope anomaly is due to edge effects and that the previously reported free-air and isostatic gravity anomalies over the outer shelf may be due in part to a lateral increase in sediment density (velocity) near the shelf edge. The East Coast magnetic anomaly and the free-air gravity high both coincide over the outer shelf edge on line 1 (Georges Bank) but are offset by 20 km from the ridge on the reflection profile. Because the magnetic-slope-anomaly wavelength is nearly 50 km across, a deep source is likely. In part, the positive free-air gravity anomaly likewise may represent the significant lateral density increase within the sedimentary section toward the outer edge of the shelf.

American Association of Petroleum Geologists Bulle↗

USGS1980

Geology and hydrology for environmental planning in Washtenaw County, Michigan

Washteaw County is underlain by glacial deposits that range in thickness from about 50 feet to about 450 feet. Underlying the glacial deposits are sedimentary rocks of Mississippian and Devonian age. The youngest of these rocks are the sandstones of the Marshall Formation in the western part of the county; the oldest are the limestones of the Detroit River Group in the southeast corner. Sand and gravel deposits in some places in the county may yield more than 500 gallons per minute of water. Approximately 50 percent of the wells tapping the Marshall Formation, the most reliable bedrock aquifer, can yield as much as 60 gallons per minute. Washtenaw County has sand and gravel deposits that are more than 50 feet thick. The deposits are mined in several areas and are of economic importance. In addition, there may be potential for peat production in the western part of the county and for clay production in the eastern part.

Michigan↗