Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources

A speculative history of the San Andreas fault in the central Transverse Ranges, California

It is generally accepted that the San Andreas fault formed between 4 and 5 Ma and that rocks west of it are now part of the Pacific plate, moving northwest relative to North America at 5 to 6 cm/yr. This model is inconsistent with the geologic record in the central Transverse Ranges. Right-lateral shear began in the vicinity of the San Andreas fault system in early Miocene time. The San Andreas fault system in the central Transverse Ranges has since evolved through three major phases; this development has led to a generally simpler, more throughgoing main trace. Slip rates on the San Andreas system were about 1 cm/yr in the Miocene, increasing to their current level of 3.5 cm/yr between 4 and 5 Ma. The modern San Andreas fault still only accounts for just over half the current relative plate rate and retains kinematic complexities inherited from its earliest geometry. The Early San Andreas transform system originated during early Miocene time in one of three transtensive zones that lay interior to the continent and east of the locus of transform motion between the Pacific and North American plates. The current three-fold division of motion in the plate boundary between the San Andreas fault, a coastal system, and an eastern California system dates to this time, as does the “anomalous” trend of the San Andreas fault through the Transverse Ranges. Basins and volcanic centers associated with this transtensive zone became dismembered as faults became integrated into a throughgoing system. Early motion led to juxtaposition of different rocks across faults now recognized as part of the Early San Andreas transform system, and to the development of sedimentary provincialism associated with uplift along the fault zone. Middle Miocene basins, including the Caliente, Cajon, Crowder, and Santa Ana basins that had previously received most of their sediments from sources far to the east, began to reflect local Transverse Ranges provenance. At least 100 km of slip is associated with the Early San Andreas transform system during early and middle Miocene time. Slip across the geometrically complex late Miocene San Gabriel transform system—which includes the San Gabriel, Cajon Valley, and early Punchbowl faults—produced uplift in the proto-Transverse Ranges at a postulated restraining bend in the fault system. Compressional structures associated with this restraining bend include the Squaw Peak and Liebre Mountain thrusts, related east-striking late Miocene reverse faults and folds, and, perhaps, northeast-striking left-lateral faults in the San Gabriel Mountains. Narrow fault-controlled basins formed during this period, including the Ridge basin, Devil’s Punchbowl basin, Mill Creek basin, and part of the Santa Ana Sandstone basin. Offset of structures and relief associated with the proto-Transverse Ranges provides the best evidence for late Miocene restorations of the modern San Andreas fault. As much as 60 km of offset is associated with the late Miocene San Gabriel transform system. Between 4 and 5 Ma, the modern San Andreas fault became the dominant member of the plate boundary system, cutting through the proto-Transverse Ranges and connecting more northerly striking traces to the north and south. The slip rate across the San Andreas fault system accelerated from 1 cm/yr to its current slip rate of 3.5 cm/yr prior to 4 Ma. The Pliocene rocks in the central Transverse Ranges do not contain evidence for relief as great as that of late Miocene or Quaternary time. The Pliocene trace of the modern San Andreas fault may have temporarily “solved” the geometric problem that led to late Miocene uplift. About 90 km of right-lateral displacement occurred on the modern San Andreas fault during Pliocene time. During Quaternary time new regions of localized vertical deformation developed in the Transverse Ranges, apparently as the result of new geometric problems within the Pliocene solution to the restraining geometry of the fault system. Left-lateral motion on east-striking faults, probably due to a northward increase in Basin and Range extension, kinked the San Andreas fault at both ends of the Transverse Ranges, producing regions of extreme shortening and uplift. The development of young right-lateral faults through the Peninsular Ranges, including the San Jacinto and Elsinore faults, also contributed to renewed uplift in the Transverse Ranges. Sixty kilometers of right-lateral slip occurred across the San Andreas fault zone during Quaternary time.

California↗

Deep-sea ostracods from the South Atlantic sector of the Southern ocean during the Last 370,000 years

We report changes of deep-sea ostracod fauna during the last 370,000 yr from the Ocean Drilling Program (ODP) Hole 704A in the South Atlantic sector of the Southern Ocean. The results show that faunal changes are coincident with glacial/interglacial-scale deep-water circulation changes, even though our dataset is relatively small and the waters are barren of ostracods until mid-MIS (Marine Isotope Stage) 5. Krithe and Poseidonamicus were dominant during the Holocene interglacial period and the latter part of MIS 5, when this site was under the influence of North Atlantic Deep Water (NADW). Conversely, Henryhowella and Legitimocythere were dominant during glacial periods, when this site was in the path of Circumpolar Deep Water (CPDW). Three new species (Aversovalva brandaoae, Poseidonamicus hisayoae, and Krithe mazziniae) are described herein. This is the first report of Quaternary glacial/interglacial scale deep-sea ostracod faunal changes in the Southern and South Atlantic Oceans, a key region for understanding Quaternary climate and deep-water circulation, although the paucity of Quaternary ostracods in this region necessitates further research. ?? 2009 The Paleontological Society.

Journal of Paleontology↗

Puente Hills blind-thrust system, Los Angeles, California

We describe the three-dimensional geometry and Quaternary slip history of the Puente Hills blind-thrust system (PHT) using seismic reflection profiles, petroleum well data, and precisely located seismicity. The PHT generated the 1987 Whittier Narrows (moment magnitude [ M w ] 6.0) earthquake and extends for more than 40 km along strike beneath the northern Los Angeles basin. The PHT comprises three, north-dipping ramp segments that are overlain by contractional fault-related folds. Based on an analysis of these folds, we produce Quaternary slip profiles along each ramp segment. The fault geometry and slip patterns indicate that segments of the PHT are related by soft-linkage boundaries, where the fault ramps are en echelon and displacements are gradually transferred from one segment to the next. Average Quaternary slip rates on the ramp segments range from 0.44 to 1.7 mm/yr, with preferred rates between 0.62 and 1.28 mm/yr. Using empirical relations among rupture area, magnitude, and coseismic displacement, we estimate the magnitude and frequency of single ( M w 6.5-6.6) and multisegment ( M w 7.1) rupture scenarios for the PHT.

California↗

Paleoseismology and neotectonics of the Shivwits section of the Hurricane Fault, northwestern Arizona

The Shivwits section of the Hurricane Fault in northwestern Arizona has been largely ignored in evaluating the seismic hazard posed to the rapidly growing populations of southwestern Utah. To assess this hazard, we conducted studies along the Shivwits section using field observations and geomorphic modeling to understand the Quaternary tectonism of this portion of the Hurricane Fault. We have found evidence that it ruptured with up to 2 to 3 m of vertical displacement per event and likely produced ???M 7 earthquakes. Our results suggest that the slip rate along the southern Hurricane Fault has not decreased during the Quaternary. The Moriah Knoll basalt, offset 150 to 200 m along the Hurricane Fault, yielded a maximum long-term slip rate of 0.15 to 0.25 mm/yr, estimated using a new 40Ar/39Ar age of 0.85 ?? 0.06 Ma. The late Quaternary slip rates on alluvial fan surfaces offset 2 to 7.4 m were estimated using pedogenic carbonate rind thickness as a calibrated proxy for age. These observations yielded slip rates of ??? 0.05 to 0.3 mm/yr. Paleoseismic trench investigations showed that two surface-rupturing events occurred in the past 15-78 k.y. A radiocarbon sample from a most-recent event (MRE) fissure yielded a calibrated age of 8900-10,400 years B.P.; the penultimate event was likely ??? 10 k.y. before the most recent event. Slip-rate estimates using the Moriah Knoll basalt (???0. 15-0.24 mm/yr; 850 ka), surface offset (???0.05-0.3 mm/yr; < 100 ka), morphologic modeling (??? 0.06-0.21 mm/yr; <100 ka), and observations from the trench (??? 0.06-0.34 mm/yr; 15-75 ka) suggest that there has been no detectable change in slip rate in the past 1 million years or so. This implies a constant deformation rate for this portion of the Colorado Plateau Margin; therefore, Basin and Range extension is actively encroaching.

Bulletin of the Seismological Society of America↗

Holocene and latest Pleistocene oblique dextral faulting on the southern Inyo Mountains fault, Owens Lake basin, California

The Inyo Mountains fault (IMF) is a more or less continuous range-front fault system, with discontinuous late Quaternary activity, at the western base of the Inyo Mountains in Owens Valley, California. The southern section of the IMF trends ???N20??-40?? W for at least 12 km at the base of and within the range front near Keeler in Owens Lake basin. The southern IMF cuts across a relict early Pliocene alluvial fan complex, which has formed shutter ridges and northeast-facing scarps, and which has dextrally offset, well-developed drainages indicating long-term activity. Numerous fault scarps along the mapped trace are northeast-facing, mountain-side down, and developed in both bedrock and younger alluvium, indicating latest Quaternary activity. Latest Quaternary multiple- and single-event scarps that cut alluvium range in height from 0.5 to 3.0 m. The penultimate event on the southern IMF is bracketed between 13,310 and 10,590 cal years B.P., based on radiocarbon dates from faulted alluvium and fissure-fill stratigraphy exposed in a natural wash cut. Evidence of the most recent event is found at many sites along the mapped fault, and, in particular, is seen in an ???0.5-m northeast-facing scarp and several right-stepping en echelon ???0.5-m-deep depressions that pond fine sediment on a younger than 13,310 cal years B.P. alluvial fan. A channel that crosses transverse to this scarp is dextrally offset 2.3 ?? 0.8 m, providing a poorly constrained oblique slip rate of 0.1-0. 3 m/ k.y. The identified tectonic geomorphology and sense of displacement demonstrate that the southern IMF accommodates predominately dextral slip and should be integrated into kinematic fault models of strain distribution in Owens Valley.

Bulletin of the Seismological Society of America↗

Late Pleistocene kinematics of the Great Southern Puerto Rico Fault Zone, Puerto Rico

Several onshore faults in southern Puerto Rico have recently been recognized as Quaternary active. However, the kinematics of these faults, particularly any lateral component, remain largely unconstrained. It is difficult to characterize low strain‐rate faults, partially due to extensive erosional and anthropogenic landscape modification, steep relief, and frequent landsliding, limiting the preservation of geomorphic features that could serve as recorders of fault motion. Here, we constrain the kinematics along sections of the Great Southern Puerto Rico Fault Zone (GSPRFZ) on the southern coastal plain of Puerto Rico. We integrate ∼1‐m‐resolution light detection and ranging (lidar)‐derived topography, historical air photos, and field mapping to identify a series of ∼50–1200‐m‐long fault scarps and lineaments that trend northwest–southeast and extend for ≥25 km across the southern coastal plain. Fault scarps are primarily south facing, cut across topography, and displace Quaternary deposits and landforms. We document multiple offset geomorphic markers, including channel thalwegs and interfluves formed in deposits previously mapped as Quaternary piedmont alluvial plain. We observe both vertical (south‐side‐down) and right‐lateral meter‐scale displacements, which indicate that the GSPRFZ accommodates right‐lateral oblique motion in the late Pleistocene, consistent with northeast motion of the Puerto Rico and the Virgin Islands microplate away from the Hispaniola block.

Puerto Rico↗

The Santa Cruz Basin submarine landslide complex, southern California: Repeated failure of uplifted basin sediment

The Santa Cruz Basin (SCB) is one of several fault-bounded basins within the California Continental Borderland that has drawn interest over the years for its role in the tectonic evolution of the region, but also because it contains a record of a variety of modes of sedimentary mass transport (i.e., open slope vs. canyon-confined systems). Here, we present a suite of new high-resolution marine geophysical data that demonstrate the extent and significance of the SCB submarine landslide complex in terms of late Miocene to present basin evolution and regional geohazard assessment. The new data reveal that submarine landslides cover an area of ~160 km2 along the eastern flank of the Santa Rosa–Cortes Ridge and have emplaced a minimum of 9 to 16 km3 of mass transport deposits along the floor of the SCB during the Quaternary. The failures occur along an onlapping wedge of Pliocene sediment that was uplifted and tilted during the later stages of basin development. The uplifted and steepened Pliocene strata were preconditioned for failure so that parts of the section failed episodically throughout the Quaternary—most likely during large earthquakes. Once failed, the material initially translated as a block glide along a defined failure surface. As transport continued several kilometers across a steep section of the lower slope, the material separated into distinctive proximal and distal components. The failed masses mobilized into debris flows that show evidence for dynamic separation into less and more mobile components that disturbed and eroded underlying stratigraphy in areas most proximal to the source area. The most highly mobilized components and those with the lowest viscosity and yield strength produced flows that blanket the underlying stratigraphy along the distal reaches of deposition. The estimated volumes of individual landslides within the complex (0.1–2.6 km3), the runout distance measured from the headwalls (>20 km), and evidence for relatively high velocity during initial mobilization all suggest that slides in the SCB may have been tsunamigenic. Because many slopes in the California Continental Borderland are either sediment starved or have experienced sediment bypass during the Quaternary, we propose that uplift and rotation of Pliocene deposits are important preconditioning factors for slope failure that need to be systematically evaluated as potential tsunami initiators.

California↗

Ground-water provinces of India

This paper gives a general resume of ground-water utilization and development and describes the occurrence of water in eight ground-water provinces of India. The paper is based in part on observations of the writer during 1951-55 and in part on earlier work of the Geological Survey of India. Ground water has been utilized extensively in India since before the beginning of the Christian era. Currently (1956) ground water is an important source of supply for domestic, stock, municipal, and industrial needs throughout the Republic and is widely used for irrigation in the Peninsular and Ganges-Brahmaputra regions west of longitude 85°. Dug, bored, and drilled wells are the principal means by which ground water is developed, although locally infiltration tunnels or improved springs are used. Methods of lifting or pumping water from wells include the hand line and bucket, the hand-lift pump, the counterpoised sweep, bullocks, and "mote," the water wheel, horizontal and vertical centrifugal pumps, and deep-well turbine pumps. The most common device for lifting water for irrigation is still the time-honored bullock and "mote" (leather bag). However, in modern India there is increasing use of mechanical pumps. With respect to the occurrence of ground water, India can be divided into eight provinces, lying in three major regions, (1) the Peninsular region, (2) the Ganges-Brahmaputra region, and (3) the Himalayan region. The Peninsular region contains six ground-water provinces. Precambrian igneous, metamorphic, and indurated sedimentary rocks and early Tertiary volcanic rocks in three of these provinces yield many small supplies of water, which generally is of good quality but locally is brackish or salty. Cretaceous water-bearing sandstones in another province are moderately productive and in places are developed for large water supplies. Late Tertiary and Quaternary water-bearing sands and gravels in two other provinces sustain many small water supplies and several large water supplies-particularly in the coastal areas of southern India. The Ganges-Brahmaputra region is a single ground-water province in which many tens of thousands of small water supplies and several thousand large supplies are obtained from water-bearing sands and gravels in late Tertiary and Quaternary alluvium. This province constitutes a vast groundwater reservoir, which is the most productive in India. The Himalayan region also is considered as a single province, in which ground water occurs in a series of narrow valleys filled with moderately to highly permeable Quaternary alluvium. These alluvial valleys transmit large quantities of water to the ground-water reservoir in the Ganges-Brahmaputra region.

Economic Geology↗

Preliminary investigation of the source of lead and strontium in deep geothermal brines underlying the Salton Sea geothermal area

A radiogenic tracer study has been made of lead and strontium in deep geothermal brines , salt from brine , and the upper Quaternary rhyolite domes near the Salton Sea in the Imperial Valley, California. The data on the brines and rhyolite glasses are compared to those from Quaternary Colorado River and Tertiary sediments of the area . The brines sampled contain '-'100 ppm Pb, sufficient for consideration as a possible ore-forming fluid. The isotopic data indicate that 80-100 percent of the strontium and 50-100 percent of the lead in these brines were acquired from the associated sediments. The isotopic compositions of lead and strontium in the Quaternary rhyolite glasses are distinctly different from those of the sediments and brines . The strontium data suggest that the rhyolite glasses were derived from basaltic or gabbroic material but may have attained as much as 40 percent of their strontium from upper crustal rocks such as the sediments analyzed.

California↗

Preliminary simulation of a M6.5 earthquake on the Seattle Fault using 3D finite-difference modeling

A three-dimensional finite-difference simulation of a moderate-sized (M 6.5) thrust-faulting earthquake on the Seattle fault demonstrates the effects of the Seattle Basin on strong ground motion in the Puget lowland. The model area includes the cities of Seattle, Bremerton and Bellevue. We use a recently developed detailed 3D-velocity model of the Seattle Basin in these simulations. The model extended to 20-km depth and assumed rupture on a finite fault with random slip distribution. Preliminary results from simulations of frequencies 0.5 Hz and lower suggest amplification can occur at the surface of the Seattle Basin by the trapping of energy in the Quaternary sediments. Surface waves generated within the basin appear to contribute to amplification throughout the modeled region. Several factors apparently contribute to large ground motions in downtown Seattle: (1) radiation pattern and directivity from the rupture; (2) amplification and energy trapping within the Quaternary sediments; and (3) basin geometry and variation in depth of both Quaternary and Tertiary sediments

Open-File Report↗

Preliminary Surficial Geologic Map of the Mesquite Lake 30' X 60' Quadrangle, California and Nevada

The Quaternary surficial geologic map of the Mesquite Lake, California-Nevada 30'X60' quadrangle depicts deposit age and geomorphic processes of erosion and deposition, as identified by a composite of remote sensing investigations, laboratory analyses, and field work, in the arid to semi-arid Mojave Desert area, straddling the California-Nevada border. Mapping was motivated by the need to address pressing scientific and social issues such as understanding and predicting the effects of climate and associated hydrologic changes, human impacts on landscapes, ecosystem function, and natural hazards at a regional scale. As the map area lies just to the south of Las Vegas, Nevada, a rapidly expanding urban center, land use pressures and the need for additional construction materials are forecasted for the region. The map contains information on the temporal and spatial patterns of surface processes and hazards that can be used to model specific landscape applications. Key features of the geologic map include: (1) spatially extensive Holocene alluvial deposits that compose the bulk of Quaternary units (~25%), (2) remote sensing and field studies that identified fault scarps or queried faults in the Kingston Wash area, Shadow Mountains, southern Pahrump Valley, Bird Spring Range, Lucy Gray Mountains and Piute Valley, (3) a lineament indicative of potential fault offset is located in Mesquite Valley, (4) active eolian dunes and sand ramps located on the east side of Mesquite, Ivanpah, and Hidden Valleys adjacent to playas, (4) groundwater discharge deposits in southern Pahrump Valley, Spring Mountains, and Lucy Gray Mountains and (5) debris-flow deposits spanning almost the entire Quaternary period in age.

Open-File Report↗

A 3-Dimensional Model of Water-Bearing Sequences in the Dominguez Gap Region, Long Beach, California

A 3-dimensional computer model of the Quaternary sequence stratigraphy in the Dominguez gap region of Long Beach, California has been developed to provide a robust chronostratigraphic framework for hydrologic and tectonic studies. The model consists of 13 layers within a 16.5 by 16.1 km (10.25 by 10 mile) square area and extends downward to an altitude of -900 meters (-2952.76 feet). Ten sequences of late Pliocene to Holocene age are identified and correlated within the model. Primary data to build the model comes from five reference core holes, extensive high-resolution seismic data obtained in San Pedro Bay, and logs from several hundred water and oil wells drilled in the region. The model is best constrained in the vicinity of the Dominguez gap seawater intrusion barrier where a dense network of subsurface data exist. The resultant stratigraphic framework and geologic structure differs significantly from what has been proposed in earlier studies. An important new discovery from this approach is the recognition of ongoing tectonic deformation throughout nearly all of Quaternary time that has impacted the geometry and character of the sequences. Anticlinal folding along a NW-SE trend, probably associated with Quaternary reactivation of the Wilmington anticline, has uplifted and thinned deposits along the fold crest, which intersects the Dominguez gap seawater barrier near Pacific Coast Highway. A W-NW trending fault system that approximately parallels the fold crest has also been identified. This fault progressively displaces all but the youngest sequences down to the north and serves as the southern termination of the classic Silverado aquifer. Uplift and erosion of fining-upward paralic sequences along the crest of the young fold has removed or thinned many of the fine-grained beds that serve to protect the underlying Silverado aquifer from seawater contaminated shallow groundwater. As a result of this process, the potential exists for vertical migration of seawater into the producing aquifers and subsequent landward migration of intruded waters beneath the existing Dominguez barrier. Incipient invasion of the Silverado aquifer by chloride-enriched waters is observed in a recently drilled well located along the crest of the fold seaward of the barrier and at a depth of 440 feet (134 meters). These new observations and interpretations indicate that the new sequence-based approach to defining the stratigraphy of the Dominguez Gap area may have important implications for seawater intrusion management. To test this, it will be useful to overlay existing water-quality and water level data onto the framework model and to incorporate the new stratigraphy into a transport model.

Open-File Report↗

Geology of possible petroleum provinces in Alaska

The history of petroleum exploration in Alaska and the geology of possible petroleum provinces in Alaska are reviewed. Maps showing Alaska's major Mesozoic and Tertiary tectonic elements, possible petroleum provinces, and indications of petrol, are included in this report. Annotated references in Geological Survey publications relating to petroleum and oil shale in Alaska are given at the end of the report. For the purpose of appraising its petroleum possibilities, Alaska is divided into the southern, central, and northern major geologic-physiographic regions. Southern Alaska includes the arcuate mountain chain formed by the Alaska and Aleutian Ranges and the Mentasta- Nutzotin Mountains, the coastal range and valley area to the south, and the southeastern Alaska "panhandle" -- an area of 185,000 square miles. Oil seeps on the west shore of Cook Inlet in southern Alaska were known as early as 1853, and claims were staked in this region in 1882. Drilling began near the oil seeps in the Katalla district about 1901, and this started Alaska's first period of oil activity. From 1902 to 1933 the Katalla field produced 154,000 barrels of oil from fractured shale and sandstone of Tertiary age the- first and only commercial production in Alaska. On the basis of geology, surficial indications of petroleum, and test wells drilled, six possible petroleum provinces are indicated in southern Alaska. They are Heceta Island area, Keku Islands area, Cook Inlet Mesozoic province, Gulf of Alaska Tertiary province, Cook Inlet Tertiary province, and Copper River basin. The exposed rocks in the Heceta Island area include lower Paleozoic graywacke-type sandstone, sandstone, conglomerate, and massive limestones with reeflike structures; igneous rocks are rare or lacking in much of the area. The Kosciusko-Tuxekan-Heceta synclinorium, the main structural feature, is modified by minor folds and faults. Some of the minor folds are reported to be broad and open, with flanks dipping 20°-145°. As far as known, the Heceta Island area has not heretofore been seriously considered as a possible petroleum province. Rocks of Silurian to Cretaceous age are exposed in the Keku Island area and include moderately folded and relatively unaltered limestone and other marine sedimentary rocks. The Cook Inlet Mesozoic province, a land area of approximately 18,500 square miles, includes a great thickness of unmetamorphosed marine sedimentary rocks of Jurassic and Cretaceous age. At least 23 test wells were drilled or started in this province by the end of 1955. Shows of oil and gas were encountered in many of these wells. During 1955 at least ten oil companies were active in this area and by the end of 1955 about 1 1/2 million acres were included in oil and gas leases applied for or granted. The Gulf of Alaska Tertiary province includes about 5,200 square miles in which rocks of Tertiary age are exposed or are believed to underlie Quaternary deposits. Between 1901 and the end of 1955 about 47 wells were drilled or started in this province. The Cook Inlet Tertiary province embraces an area of about 9,500 square miles, of which about 4,100 is covered by the shallow waters of Cook Inlet. Petroleum exploration has been in that part of the area which overlaps the Cook Inlet Mesozoic province. Eocene or younger Tertiary nonmarine sedimentary rocks are believed to underlie much of the province, and marine rocks of Tertiary age may also be present. The Copper River basin is a topographic basin underlain by unconsolidated deposits of Quaternary age. Tertiary rocks favorable for the accumulation of petroleum may underlie part of the basin but this is not believed likely. Except for some leasing activity no petroleum exploration has been recorded in the Copper River Basin to the end of 1955. Central Alaska is a region of about 275,000 square miles and consists of an irregular assemblage of intricately dissected uplands and alluvium-floored lowland basins. Scattered peaks of resistant intrusive igneous rocks surmount most of the upland areas. In the vast region of central Alaska only six test wells are known to have been drilled for the purpose of finding oil and gas. The maximum depth reached was 350 feet and the holes were mostly or entirely in Quaternary deposits. In recent years several oil companies have investigated some parts of the region and large areas in the Yukon-Koyukuk province are now under lease. Oil seeps, gas seeps, and other indications of petroleum have been reported from many localities; samples from two localities have been analyzed and reported to be petroleum. The geology of central Alaska is similar in a general way to that of the area between the Rocky Mountains and Sierra-Cascade belts of the United States. Sedimentary rocks, probably equivalent to the Precambrian Belt series, and rocks of the Cambrian and all younger geologic systems have been recognized in central Alaska. The structure of the region is known to be complex, but except in local mineral districts, it has not been mapped in detail. Based on the limited amount of available information, the region cannot be regarded as distinctly favorable for significant accumulations of petroleum. However, three pre-Cenozoic provinces, the Yukon-Koyukuk, the Kobuk, and the Kandik, and several large Cenozoic basin provinces may be worthy of further investigation. Northern Alaska includes the Brooks Range and all the treeless tundra north to the Arctic Coast, an area of about 125,000 square miles. The presence of oil seeps along the Arctic Coast has been known at least since 1900 and a description of the Cape Simpson oil seeps vas published in 1909. Since then oil and gas seeps have been described from nine localities, and oil shales and oil-bearing sandstones are known from many localities in the Arctic Foothills province. Oil and gas deposits have been discovered and geologic conditions are favorable for oil and gas accumulations in approximately half of the region. In 1923 approximately 37,000 square miles in northern Alaska was reserved by Executive order as Naval Petroleum Reserve No. 4. In 1944 the U. S. Navy began a vast petroleum exploration program which was suspended in 1953. In the years 1945 through 1955, 37 test wells and 45 core tests were drilled on 18 structures. Three oil fields, Umiat, Simpson, and Fish Creek, and two gas fields, South Barrow and Gubik, were discovered. Total reserve estimates for all discoveries of oil to 1955 range from 30 to 100 million barrels, and for gas, from 370 billion to 900 billion cubic feet. All northern Alaska, with the exception of the Brooks Range, can be considered a possible petroleum province, but the region can be subdivided into provinces of somewhat different potentialities. These subdivisions roughly correspond with the geomorphic provinces and sections, which in turn reflect differences in geology. The known oil-bearing beds are of Mesozoic age, primarily Cretaceous, and thus the possible petroleum provinces could be designated as Mesozoic. However, Paleozoic and Cenozoic rocks with favorable reservoir characteristics are exposed in the region and possibly underlie, in favorable structural situations, some of the areas as yet not tested. The Arctic Coastal Plain province includes gently folded and flat-lying Mesozoic beds that overlie a basement complex of Paleozoic and early Mesozoic age. Near the southern edge of this province the basement rocks are at depths of at least 20,000 feet, and to the north these rocks rise to within 2,500 feet of the surface. The Teshukpuk Lake section of the Arctic Coastal plain includes many of the known oil seeps; it is the most accessible to sea transportation, and lies almost completely within NPR 4. Thirteen test wells and 35 core tests have been drilled here; one gas field and two (at present, noncommercial) oil fields have been discovered. The possibility of further discoveries may depend largely on locating porous sandstones in stratigraphic rather than anticlinal traps. The White Hills section is distinguished topographically from the Teshukpruk section by its white-gravel-covered hills and fever lakes, and geologically by the presence of Tertiary rocks, including 2,000 feet of nonmarine beds in the west and at least 7,000 feet of marine beds to the east, in the vicinity of Carter Creek. This section appears to be more complex structurally. No test wells have been drilled in the White Hills section. The Northern Foothills section includes many closed anticlines. Twenty-four test wells and ten core tests have been drilled on 11 structures and two discoveries have been made -the Umiat oil field and the Gubik gas field. All these tests have been drilled in Cretaceous rocks. The Southern Foothills section is structurally similar to the Alberta Foothills and to the northern part of the Brooks Range. Great thicknesses of marine shale of Lover Cretaceous, Jurassic, and Triassic age are exposed. The outcropping Mesozoic sandstones are generally poorly sorted, nonporous, and impermeable. To the south the section is bordered by mountainous exposures of Mississippian limestone, which probably underlie at least part of this section. The rocks that underlie the deeply eroded complex structures of the Brooks Range include schist, slate, argillite, and limestone. Some exposed limestones have a strong petroleum-like odor and contain traces of petroleum residues.

Alaska↗

Gold occurrences near Jefferson, South Carolina

Gold, possibly in economic amounts, is present in the Jefferson area, South Carolina. It occurs in Slate Belt rocks of Paleozoic age, in Coastal Plain sediments of Cretaceous age, and in alluvial deposits of Quaternary age. The area is near the inner edge of the Coastal Plain province and includes the Brewer Gold Mine, which was intermittently active until 1935 and had a total gold production valued at about $450,000. Slate Belt rocks underlie the entire area and crop out mainly in valley slopes and upper drainage ways; auriferous Coastal Plain sediments underlie a small upland, and Quaternary alluvium lies in and along streams draining the upland and adjacent areas. Gold in the bedrock at the Brewer Mine occurs chiefly in vein lodes in siliceous volcanic and metavolcanic rocks of Paleozoic age. Gold in Coastal Plain sediments is mainly in placer deposits in the lower gravel layers. Gold in Quaternary alluvial deposits is in placers in the present stream channels and in flood plain and abandoned channel deposits. A lode deposit may exist in the rocks beneath the Coastal Plain sediments.

Open-File Report↗

Appraisal of water in bedrock aquifers, northern Cascade County, Montana

Suburban residential expansion of the city of Great Falls has resulted in an increased demand on water supplies from bedrock aquifers in northern Cascade County. The unconsolidated deposits aquifer of Quaternary age, including alluvium and glacial lake deposits, also is an important source of water in the area. Water levels in the Madison-Swift aquifer and all overlying aquifers, including the Quaternary deposits aquifer, reflect unconfined (water-table) conditions in the Great Falls vicinity. This interconnected hydrologic system is the result of breaching of the major anticlinal structure, by ancestral and present day erosion of drainage channels by the Missouri River and its tributaries. Significant vertical inter-aquifer mixing of water, as well as surface water/groundwater interchange, probably occurs in the central part of the study area. Characterization of the chemical composition of water in individual aquifers based on samples from wells in this area probably is unreliable because of this mixing. Quality of water from two wells in the Madison-Swift aquifer near Giant Springs is similar to water from the springs. Water from these three samples is less mineralized than most groundwater in the study area; dissolved solids concentrations for the three samples range from 516 to 550 mg/L. The quality of water varies among aquifers and throughout the study area. The ranges of dissolved solids concentrations determined by chemical analysis are Madison-Swift aquifer, about 520 to 1,570 mg/L; Morrison Formation, 908 to 1 ,480 mg/L; Kootenai Formation, 558 to 1,550 mg/L; Colorado Group , 2,690 and 2,740 mg/L (two samples); and unconsolidated Quaternary deposits, 383 to 2,060 mg/L. The chemical quality of water from the Colorado Group in the western one-third of the area generally is more mineralized than water from aquifers in the rest of the area. Specific conductance of water from eight wells completed in the Colorado Group averages 4,440 micromhos at 25 C. (Author 's abstract)

Open-File Report↗

Preliminary lithostratigraphy, interpreted geophysical logs and hydrogeologic characteristics of the 98th Street core hole, Albuquerque, New Mexico

Core samples, cuttings, and numerous geophysical logs obtained from the 1560 ft (475.5 m) core hole drilled at 98th Street on the west side of Albuquerque provide key stratigraphic and hydraulicproperty information for the upper clastic sediments of the Santa Fe Group, which form the principal aquifer in the region. The core hole and an adjacent water-level monitoring well were drilled cooperatively by the U.S. Geological Survey (USGS) and the City of Albuquerque and investigated in collaboration with the New Mexico Bureau of Mines and Mineral Resources and the New Mexico Office of the State Engineer to improve understanding of aquifer characteristics and controls on ground-water availability and quality. The 751.5 ft (229 m) of core samples recovered from the core hole are the only undisturbed samples of nonlithified sediments of the upper part of the Santa Fe Group that have been collected in this area. These samples have allowed us, for the first time, to directly observe and characterize the lithic and sedimentologic features of this part of the section, and to correlate the detailed geologic features with geophysical-log characteristics, magnetic susceptibility measurements, hydraulic variables, and trace-element geochemistry. The adjacent well was designed to be an areally representative ground-water level and water-quality monitoring well for the Santa Fe Group aquifer. This report chiefly addresses the lithologic, stratigraphic, and hydrogeologic features determined from the 98th Street core hole; other reports address related characteristics. Previous geologic studies predicted the stratigraphy at the site to be, from the land surface downward: 1) Quaternary alluvial and eolian valley-border sediments; 2) fluvial sand and gravel of the upper unit of the Santa Fe Group (Ceja Member of the Santa Fe Formation of Kelly, 1978; equivalent to the Sierra Ledrones Formation of Machette (1978a); 3) downward-fining basin-floor silty clay deposits and 4) fluvial sandy and silty facies of the middle unit of the Santa Fe Group (the Middle Red Member of Bryan and McCann, 1937, and Lambert, 1968). New geologic interpretations indicate that the drill site is in a fault block bounded by east-dipping normal faults and the oblique Atrisco-Rincon fault zone. Core-hole sampling recovered 760.6 ft (231.8 m) of core, in core segments 2.1-2.375 in. (5.3-6 cm) in diameter, and 0.2-10 ft (6.1 cm-3 m) long. The core hole was cased with centered 3-in. PVC casing, and is available for geophysical logging. The monitoring-well hole contains four piezometers at depths of 1544 ft (470.6 m), 1112 ft (338.9 m), 749 ft (228.3 m), and 458 ft (139.6 m). Sediments in the core are loose to weakly cemented gravel, sand, silt, and clay, and lithified sandstone. Laboratory analyses of particle-size distributions of 28 channel samples show that most silty sand samples are uniformly graded and poorly sorted; medium sand samples are moderately sorted. Six principal sediment types are used to describe the core; these sediment types are repeated in various combinations throughout the core and are used to define 22 lithologic units in the cored interval. The six principal sediment types contain sequences of beds having similar modal grain size and sedimentary structure, and are listed in decreasing abundance: 1) Silty fine sand, poorly sorted, containing a coarse silt matrix. Geophysical logs show highly variable baselines with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.12-2.25 g/cc and porosity values of 30-35 percent are typical. 2) Medium sand, moderately to poorly sorted. Geophysical logs show baselines of low variability with deflections that are related to clay beds and sequences of silt, clay, and sorted fine sand. Density values of 2.05-2.20 g/cc and porosity values of 30-35 percent are typical. 3) Clayey sandy silt, poorly sorted, locally microlaminated clay and silt, generally nonplastic. Geophysical logs show highly variable baselines with deflections that are related to sequences of clay and fine sand. Density values of 2.1-2.2 g/cc and porosity values of 30-40 percent are typical. 4) Silt and clay, characteristically red to reddish brown and medium to high plasticity, massive to indistinctly microlaminated. Geophysical logs show variable baselines with broad, high-amplitude compound spikes that are related to sequences of silt and fine sand. Density values of 2.12-2.25 g/cc and porosity values of >45 percent are typical. 5) Sand and gravel, poorly sorted. Geophysical logs show variable baselines with deflections that are related to sequences of silty and sorted fine sand. 6) Sandstone, fine-to-medium grained, poorly sorted, cemented chiefly by calcite, which fills the original pore space. Geophysical logs show density values >2.25 g/cc and porosity values <30 percent. The 22 lithologic units are correlated with recognized basin-floor fluvial lithofacies (Hawley, 1996), which include sand and gravel (lithofacies I), sand with lenses of pebbly sand, silt, and silty clay (lithofacies II), and interbedded sand, silt, and silty clay (modified lithofacies III, IV, IX). The sediments in the core hole are correlated with three informal lithostratigraphic units. The top unit, 0-19 ft (0-5.8 m) depth, consists of Quaternary eolian sand and valley-border alluvium. Coarsegrained deposits in the 19-97 ft (5.8-29.6 m) interval are correlated with the upper unit of the Santa Fe Group. The fine-grained section in the 97-787 ft (29.6-239.9 m) interval is correlated tentatively with the middle unit of the Santa Fe Group. This section contains thick sequences of laminated red and olivebrown clay and silt overbank deposits (441-787 ft) in the distinctive Atrisco member of Connell and others (1998). The Atrisco is correlated with fine-grained zones in numerous wells throughout the central Albuquerque metropolitan area, and is recognized as a zone that separates the upper Santa Fe aquifer from underlying middle Santa Fe deposits. The lower section of the middle unit of the Santa Fe, 787-1500 ft (239.9-457.2 m) depth, includes an upper sequence of moderately sorted channel-fill medium sand, and a lower sequence of sand, silt, and clay overbank deposits. The age of the cored interval is not known precisely. The upper Santa Fe gravel is related regionally to a through-flowing river system that was established in the Rio Grande rift valleys in Early Pliocene time, >4.5 MA. The middle Santa Fe unit is dated tentatively by correlation with a fossiliferous section, in which sandy beds that directly underlie the upper Santa Fe are Late Miocene (Hemphellian), 4.6- 8.9 MA. Further, the middle Santa Fe unit, with dominantly normal magnetic polarity, may have been deposited during closely spaced normal magnetic chrons 5.9-8.3 Ma. Four hydrostratigraphic units summarize the hydrogeologic framework for the 98th Street site: 1) Quaternary valley-border deposits, 2) upper Santa Fe sand and gravel deposits, 3) middle Santa Fe overbank deposits, and 4) middle Santa Fe channel-sand deposits. Empirical values of horizontal hydraulic conductivity estimated from core samples reveal a previously unknown contrast in hydraulic conductivity in the lowest two hydrostratigraphic units. Correlations among numerous wells show that the distinctively fine-grained Atrisco member, with estimated hydraulic conductivities (K) of <0.02-17 ft/day, is a laterally extensive barrier to vertical ground-water flow. The underlying unit that contains moderately sorted medium sand is a potential aquifer production zone that should be investigated further. Laboratory determination of vertical hydraulic conductivity values for fine-grained core samples range from 10 -2 to 10 -7 ft/day; recompacted sandy samples have K values of 1 to 10 -2 ft/day. Results of tests conducted with increasing effective stress show that K values of all samples decrease with decreasing porosity. Comparison of K values from laboratory, empirical, and calculated geophysical values shows discrepancies of 1-3 orders of magnitude (ft/day), indicating that additional analyses of core samples and geophysical data are necessary for future characterization of the Santa Fe Group aquifer.

New Mexico↗

Hydrothermal systems of the Cascade Range, north-central Oregon

Quaternary volcanoes of the Cascade Range form a 1,200- kilometer-long arc that extends from southern British Columbia to northern California. The section of the Cascade Range volcanic arc in central Oregon is characterized by relatively high Quaternary volcanic extrusion rates and hot-spring discharge rates. Stableisotope data and measurements of hot-spring heat discharge indicate that gravity-driven thermal fluid circulation transports about 1 MW (megawatt) of heat per kilometer of arc length from the Quaternary arc into Western Cascade rocks older than about 7 Ma (millions of years before present). Inferred flow-path lengths for the Na-Ca-Cl thermal waters of the Western Cascades are 10 to 40 kilometers (km), and an average topographic gradient as large as 0.1 separates the inferred recharge areas from the hot-spring groups. Thermal-fluid residence times are probably 10 2 to 10 4 years: sulfate-water isotopic equilibrium indicates residence times of more than 10 2 years, and our interpretation of stable-isotope data implies residence times of less than 10 4 years.

Oregon↗

Geology and hydrogeology of the Caribbean Islands aquifer system of the Commonwealth of Puerto Rico and the U.S. Virgin Islands

Poorly lithified to unconsolidated carbonate and clastic sedimentary rocks of Tertiary (Oligocene to Pliocene) and Quaternary (Pleistocene to Holocene) age compose the South Coast aquifer and the North Coast limestone aquifer system of Puerto Rico; poorly lithified to unlithified carbonate rocks of late Tertiary (early Miocene to Pliocene) age make up the Kingshill aquifer of St. Croix, U.S. Virgin Islands. The South Coast aquifer, North Coast limestone aquifer system, and Kingshill aquifer are the most areally extensive and function as the major sources of ground water in the U.S. Caribbean Islands Regional Aquifer-System Analysis (CI-RASA) study area. In Puerto Rico's South Coast ground-water province, more than 1,000 meters of clastic and carbonate rocks of Oligocene to Pliocene age infill the South Coast Tertiary Basin. The pattern of lithofacies within this basin appears to have been controlled by changes in base level that were, at times, dominated by tectonic movement (uplift and subsidence), but were also influenced by eustasy. Deposition of the 70-kilometer long and 3- to 8-kilometer wide fan-delta plain that covers much of the South Coast ground-water province occurred largely in response to glacially-induced changes in sea level and climate during the Quaternary period. Tectonic movement played a much less important role during the Quaternary. The North Coast ground-water province of Puerto Rico is underlain by homoclinal coastal plain wedge of carbonate and siliciclastic rocks that infill the North Coast Tertiary Basin and thicken to more than 1,700 meters. A thin basal siliciclastic sequence of late Oligocene age is overlain by a thick section of mostly carbonate rocks of Oligocene to middle Miocene age. Globigerinid limestone of late Miocene to Pliocene age crops out and lies in the shallow subsurface areas of northwestern Puerto Rico. Oligocene to middle Miocene age rocks tentatively can be divided into five depositional sequences and associated systems tracts; these rocks record carbonate and minor siliciclastic deposition that occurred in response to changes in relative sea level. The Cibao Formation represents the most complex of these sequences and contains a varied facies of carbonate, mixed carbonate-siliciclastic, and siliciclastic rocks that reflect differential uplift, subsidence, and transgression of the sea. Uplift, graben formation, and gradual shallowing of the sea are reflected within the bathyal-dominated sedimentary facies of the Kingshill Limestone in St. Croix, U.S. Virgin Islands. Reef-tract limestone beds of Pliocene age were subject to exposure, resubmergence, and meteoric leaching of aragonitic skeletal debris; these beds contain patchy lenses of dolomite that are restricted to a small, structurally-controlled embayment. The South Coast aquifer, the principal water-bearing unit of Puerto Rico's South Coast ground-water province, consists of boulder- to silt-size detritus formed by large and small coalescing fan deltas of Pleistocene to Holocene age. Deep well data indicates that it is possible to vertically separate and group a highly complex and irregular-bedded detrital sequence that underlies distal parts of the fan-delta plain into discrete water-bearing units if correlated with 30- to 40-meter thick, eustatically-controlled depositional cycles. Lithofacies maps show that greatest hydraulic conductivity within the fan-delta plain is generally associated with proximal fan and midfan areas. Distal and interfan areas are least permeable. Alluvial valley aquifers located in the western part of the South Coast ground-water province are important local sources of water supply and appear to contain some of the same physical and hydraulic characteristics as the South Coast aquifer. Older sedimentary rocks within the basin are poor aquifers; conglomeratic beds are well-cemented, and carbonate beds do not contain well-developed solution features, except locally where the beds are overlain by alluvium. Ground-water occurs under unconfined conditions in proximal and midfan areas. Confined conditions within deeper parts of the system and in interfan and some midfan areas are created largely by the intercalated nature of discontinuous fine-grained beds that retard vertical ground-water movement. The development of water resources in southern Puerto Rico has modified the hydrologic system of the South Coast aquifer considerably. Under predevelopment conditions, the South Coast aquifer was recharged in the unconfined, proximal fan and some midfan areas by infrequent rainfall and seepage from streams near the fan apex. Discharge occurred as seabed seepage, baseflow discharge along the lower coastal reach of streams, seepage to coastal wetlands, or evapotranspiration in areas underlain by a shallow water table. Under development conditions, seepage from irrigation canals and areal recharge from furrow irrigation represented a principal mechanism for recharge to the aquifer. Increased ground-water withdrawals in the 1960's and 1970's resulted in declines in the water table to below sea level in some places and intrusion of salt water into the aquifer. By the middle 1980's, a reduction in ground-water withdrawals and a shift from furrow irrigation to drip-irrigation techniques resulted in the recovery of water levels. Under present-day (1986) conditions, regional ground-water flow is coastward but with local movement to some well fields. In addition to the discharge mechanisms described above, ground-water discharges also to coastal canals. The North Coast limestone aquifer system consists of limestone, lesser amounts of dolomite, and minor clastic detritus of Oligocene to Pliocene age that form an unconfined upper aquifer and a confined lower aquifer; these aquifers are separated by a clay, mudstone, and marl confining unit. Topographic relief and incision of carbonate coastal plain rocks by streams are the principal factors controlling the direction of ground-water flow. The North Coast limestone aquifer system is recharged principally by precipitation that enters the upper and lower aquifers where they crop out. Regional groundwater movement from the upper aquifer is to the major rivers, wells, coastal wetlands, coastal, nearshore, and offshore springs, or as seabed seepage. Regional discharge from the lower aquifer is to the major rivers along its unconfined parts or where the confining unit has been breached by streams. Discharge from the lower aquifer also occurs in the San Juan area where the Mucarabones Sand provides an avenue for diffuse upward ground-water flow. Transmissivity within the upper limestone aquifer appears to be largely regulated by the thickness of the freshwater lens. The lens is thickest and transmissivity is greatest in interstream areas that lie in a zone that closely corresponds to the landwardmost extent of the underlying saltwater wedge. Hydraulic conductivity of the upper aquifer generally increases in a coastward direction and reflects lithologic control, karstification in the upper 30 to 100 meters of the section, and enhanced permeability in a zone of freshwater and saltwater mixing. Transmissivity of the lower aquifer is an order of magnitude smaller than that of the upper aquifer; highest transmissivities in the lower aquifer largely correspond to a coarse grainstone-packstone and coral-patch-reef depositional facies contained within the outcropping parts of the Montebello Limestone Member and its subsurface equivalents. Porosity within the North Coast limestone aquifer system is high in grainstone-packstones and low in wackestone and marl. Dolomitized zones and moldic grainstone-packstone strata are the most porous carbonate rocks, but occur in thin beds that usually are only a few meters thick. Processes of karstification that include the development of caverous zones and large vugs, and dissolution along possible regional fracture sets has enhanced permeability within the upper part of the aquifer system. Stratigraphic and lithologic control play an important role controlling permeability within the lower part of the system. The Kingshill aquifer of St. Croix, in large part, is composed of deepwater limestone that contains only microscopic pores and is poorly permeable; however, the upper part of the aquifer, a shallow-water skeletal and reef limestone, is fairly permeable, but restricted in areal extent. Permeability within these uppermost beds of the aquifer has been enhanced by meteoric leaching, dissolution within a mixing zone of saltwater and fresh water, and dolomitization. However, most large-yield wells completed in the Kingshill aquifer are also screened in alluvium that overlies or infills incised channels. The alluvial deposits serve as a temporary storage zone for rainfall, runoff, and ground water slowly entering the Kingshill aquifer.

Puerto Rico↗