SEARCH · Geology Reports

Results for “American Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources

USGS2026

Bedrock geologic map of the Eagle Lake quadrangle, Essex County, New York

The bedrock geology of the 7.5-minute Eagle Lake quadrangle, Essex County, New York, consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Granulite facies Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 giga-annum (Ga, billion years before present). The earliest of four phases of deformation (D1) predated AMCG magmatism and is characterized by gneissosity, rarely preserved F1 isoclinal folds, and migmatite in the paragneiss host rocks. A sample of hornblende quartz syenite from the AMCG suite, collected from an abandoned railroad cut on Old Furnace Road, yielded a U-Pb zircon age of 1,149±10 million years before present. D2 deformation produced a composite penetrative gneissosity, migmatite, and isoclinal F2 folds. Towards the end of D2, felsic magmatism (including the regionally extensive Lyon Mountain Granite Gneiss, abbreviated “LMG”) spread by penetrative migration as semiconcordant alkali feldspar granite sheets subparallel to S2 into the previously deformed lithologies. The LMG crystallized at approximately 1.15 to 1.14 Ga and displays synkinematic F2 folds thus constraining the time of D2 deformation. Exhumation of the Marcy anorthosite began during D3 along a mylonitic extensional detachment, as a type of core complex. Protracted D3 produced F3 folds exhibited in regional domes and basins, such as the Hammondville antiform, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. D4 created NE- and NW-trending boudinage, local high-grade ductile shear zones, and crosscutting granitic pegmatite dikes. Kilometer (km)-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. Lower Paleozoic rocks are part of the Early Cambrian to Late Ordovician great American carbonate bank on the ancient margin of Laurentia. The Potsdam Sandstone preserves the Cambrian stratigraphy in outliers above the Great Unconformity. The Paleozoic rocks are weakly folded and block faulted. Parts of the quadrangle are covered by undifferentiated glacial deposits, but much of the quadrangle contains only a variably thick, veneer of unmapped glacial till over significant areas of exposed bedrock. The map also shows waste rock piles and locations of historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondack Mountains, and provide a modern context for historical mines. This Scientific Investigations Map of the Eagle Lake 7.5-minute quadrangle consists of a map sheet, an explanatory pamphlet, and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information. The map sheet includes a bedrock geologic map, a correlation of map units, a description of map units, an explanation of map symbols, and two cross sections. The explanatory pamphlet includes a discussion of the geology.

New York↗

USGS2003

Reinterpretation of the stratigraphy and structure of the Rancho Las Norias area, central Sonora, Mexico

New geologic mapping and fossil data in the vicinity of Rancho Las Norias, 30 km east of Hermosillo, Sonora, Mexico, show that rocks previously mapped as Precambrian instead are Paleozoic. Previous geologic maps of the Rancho Las Norias area show northeast-directed, southwest-dipping reverse or thrust faults deforming both Precambrian and Paleozoic rocks. The revised stratigraphy requires reinterpretation of some of these faults as high-angle normal or oblique-slip faults and the elimination of other faults. We agree with earlier geologic map interpretations that compressional structures have affected the Paleozoic rocks in the area, but our mapping suggests that the direction of compression is from southeast to northwest. Published by Elsevier Ltd.

Journal of South American Earth Sciences↗

USGS1973

Structure and development of the continental margin of British Honduras

The continental margin of British Honduras is characterized by elongate ridges that are sub-parallel with the coast and that diverge slightly northward. Each ridge apparently is formed by aligned fault blocks composed of continental basement rock that rotated and subsided during rifting of the margin. The western part of the Cayman Ridge may be underlain by similar rock that extends southwestward into the margin. Little sediment has been trapped in the basins between the ridges, presumably as a result of long-term, low rates of sedimentation. A canyon system that is controlled by both fault-block ridges and cross faults transects the margin and opens into the Yucatan Basin. Deep-sea sediments are characterized by a succession of pelagic deposits above acoustic basement rocks; these deposits are covered by turbidites that have formed deep-sea fan deposits in some places. The change from pelagic to turbidite deposition may have occurred at the end of Cretaceous time when regional uplift provided a source for clastic materials. The principal channel for transport of sediment to the deep sea is believed to be a graben that extends northeastward from the southwest corner of the Gulf of Honduras. Development of the margin may have begun in Late Jurassic time when sphenochasmic rifting created the ancestral Gulf of Honduras. Near the end of Cretaceous time, a new set of motions began, with the Caribbean plate moving relatively eastward and slightly away from the North American plate. This new motion resulted in continued movement of basement blocks through Tertiary and Quaternary time. Although this margin is not young, it has a geomorphically youthful aspect in that the sedimentary sequences do not obscure the rift structures.

British Honduras, Caribbean Sea, Gulf of Honduras↗

USGS2013

The quality of our Nation’s waters--Ecological health in the Nation's streams, 1993-2005

This report summarizes a national assessment of the ecological health of streams done by the U.S. Geological Survey's (USGS) National Water-Quality Assessment Program (NAWQA). Healthy functioning stream ecosystems provide society with many benefits, including water purification, flood control, nutrient recycling, waste decomposition, fisheries, and aesthetics. The value to society of many of these benefits is substantial; for example, sportfishing in the United States generates an estimated annual economic output of $125 billion, including more than 1 million jobs (National Research Council, 2005; American Sportfishing Association, 2008). Continued monitoring and assessment of the Nation’s streams is needed to support informed decisions that will safeguard this important natural and economic resource. The quality of streams and rivers is often assessed with measures of the chemical or physical properties of water. However, a more comprehensive perspective is obtained if resident biological communities are also assessed. Guidelines to protect human health and aquatic life have been established for specific physical and chemical properties of water and have become useful yardsticks with which to assess water quality. Biological communities provide additional crucial information because they live within streams for weeks to years and therefore integrate through time the effects of changes to their chemical or physical environment. In addition, biological communities are a direct measure of stream health—an indicator of the ability of a stream to support aquatic life. Thus, the condition of biological communities, integrated with key physical and chemical properties, provides a comprehensive assessment of stream health.

conterminous United States↗

USGS2021

Geochronologic, isotopic, and geochemical data from pre-Cretaceous plutonic rocks in the Lane Mountain area, San Bernardino County, California

Pre-Cretaceous, predominantly dioritic plutonic rocks in the Lane Mountain area, California, intrude metasedimentary and metavolcanic rocks considered part of the El Paso terrane. New geochronologic (uranium-lead zircon), geochemical, and isotopic data provide a reliable basis for dividing these pre-Cretaceous plutonic rocks into two mappable suites of Permian–Triassic and Late Jurassic ages. The 26 Permian–Triassic samples included in this report have a mean age of ~248 mega-annum (Ma), range in composition from monzodiorite to quartz monzonite and granodiorite, and have a mean initial 87 Sr/ 86 Sr ratio (Sri) of ~0.7045. The 22 Late Jurassic samples have a mean age of ~149 Ma, range in composition from gabbro to granite, and have a mean Sr i of ~0.7055. Accurate mapping of these two plutonic suites and their detailed field relations with the associated metamorphic rocks is essential for resolving the geologic history and regional tectonic significance of the Lane Mountain area. The sub-0.706 Sr i values of both plutonic suites at Lane Mountain are consistent with previous suggestions that the El Paso terrane is allochthonous and did not develop on Precambrian continental lithosphere. Both suites are considered parts of northwest-trending magmatic arcs interpreted to have formed above east-dipping subduction zones along the evolving North American continental margin, and both arcs are interpreted to cross a major east-west-trending boundary between the El Paso terrane and rocks considered part of ancestral North America in the San Bernardino Mountains area to the south. The El Paso terrane thus appears to have been attached to the San Bernardino Mountains area at least since Permian–Triassic time, although the boundary probably has been modified by Cenozoic faulting.

California↗

USGS2012

Methods of practice and guidelines for using survey-grade global navigation satellite systems (GNSS) to establish vertical datum in the United States Geological Survey

Geodetic surveys have evolved through the years to the use of survey-grade (centimeter level) global positioning to perpetuate and post-process vertical datum. The U.S. Geological Survey (USGS) uses Global Navigation Satellite Systems (GNSS) technology to monitor natural hazards, ensure geospatial control for climate and land use change, and gather data necessary for investigative studies related to water, the environment, energy, and ecosystems. Vertical datum is fundamental to a variety of these integrated earth sciences. Essentially GNSS surveys provide a three-dimensional position x, y, and z as a function of the North American Datum of 1983 ellipsoid and the most current hybrid geoid model. A GNSS survey may be approached with post-processed positioning for static observations related to a single point or network, or involve real-time corrections to provide positioning "on-the-fly." Field equipment required to facilitate GNSS surveys range from a single receiver, with a power source for static positioning, to an additional receiver or network communicated by radio or cellular for real-time positioning. A real-time approach in its most common form may be described as a roving receiver augmented by a single-base station receiver, known as a single-base real-time (RT) survey. More efficient real-time methods involving a Real-Time Network (RTN) permit the use of only one roving receiver that is augmented to a network of fixed receivers commonly known as Continually Operating Reference Stations (CORS). A post-processed approach in its most common form involves static data collection at a single point. Data are most commonly post-processed through a universally accepted utility maintained by the National Geodetic Survey (NGS), known as the Online Position User Service (OPUS). More complex post-processed methods involve static observations among a network of additional receivers collecting static data at known benchmarks. Both classifications provide users flexibility regarding efficiency and quality of data collection. Quality assurance of survey-grade global positioning is often overlooked or not understood and perceived uncertainties can be misleading. GNSS users can benefit from a blueprint of data collection standards used to ensure consistency among USGS mission areas. A classification of GNSS survey qualities provide the user with the ability to choose from the highest quality survey used to establish objective points with low uncertainties, identified as a Level I, to a GNSS survey for general topographic control without quality assurance, identified as a Level IV. A Level I survey is strictly limited to post-processed methods, whereas Level II, Level III, and Level IV surveys integrate variations of a RT approach. Among these classifications, techniques involving blunder checks and redundancy are important, and planning that involves the assessment of the overall satellite configuration, as well as terrestrial and space weather, are necessary to ensure an efficient and quality campaign. Although quality indicators and uncertainties are identified in post-processed methods using CORS, the accuracy of a GNSS survey is most effectively expressed as a comparison to a local benchmark that has a high degree of confidence. Real-time and post-processed methods should incorporate these "trusted" benchmarks as a check during any campaign. Global positioning surveys are expected to change rapidly in the future. The expansion of continuously operating reference stations, combined with newly available satellite signals, and enhancements to the conterminous geoid, are all sufficient indicators for substantial growth in real-time positioning and quality thereof.

Techniques and Methods↗

USGS1974

Analyses and economic potential of monazite in Liberia

Eleven monazite samples from Liberia, including seven from beach sands, were analyzed by the X-ray fluorescence method. The monazite samples, containing only one-half percent impurities, were obtained by use of a hot Clerici-solution procedure for purification which was devised by the author. The percentage of the rare-earth elements in Liberian monazite concentrates does not differ greatly from that of monazite sands elsewhere in the world. The average of the 11 samples shows less praseodymium and neodymium than Russian and American monazites, but more cerium. Liberian coastal sands apparently contain sufficient reserves of monazite (and other heavy minerals of commerce) to encourage mining. A feasibility study of production and marketing of monazite from Liberian beach sands is recommended.

Journal of Research of the U.S. Geological Survey↗

USGS2017

Vertical datum conversion process for the inland and coastal gage network located in the New England, Mid-Atlantic, and South Atlantic-Gulf hydrologic regions

Datum conversions from the National Geodetic Vertical Datum of 1929 to the North American Vertical Datum of 1988 among inland and coastal gages throughout the hydrologic regions of New England, the Mid-Atlantic, and the South Atlantic-Gulf have implications among river and storm surge forecasting, general commerce, and water-control operations. The process of data conversions may involve the application of a recovered National Geodetic Vertical Datum of 1929–North American Vertical Datum of 1988 offset, a simplistic datum transformation using VDatum or VERTCON software, or a survey, depending on a gaging network datum evaluation, anticipated uncertainties for data use among the cooperative water community, and methods used to derive the conversion. Datum transformations from National Geodetic Vertical Datum of 1929 to North American Vertical Datum of 1988 using VERTCON purport errors of ± 0.13 foot at the 95 percent confidence level among modeled points, claiming more consistency along the east coast. Survey methods involving differential and trigonometric leveling, along with observations using Global Navigation Satellite System technology, afford a variety of approaches to establish or perpetuate a datum during a survey. Uncertainties among leveling approaches are generally < 0.1 foot, and and Global Navigation Satellite System approaches may be categorized with uncertainties of ≤0.1 foot for a Level I quality category and ≥0.1 foot for Level II or III quality categories (defined by the U.S. Geological Survey) by observation and review of experienced practice. The conversion process is initiated with an evaluation of the inland and coastal gage network datum, beginning with altitude datum components and the history of those components queried through the U.S. Geological Survey Groundwater Site Inventory database. Subsequent edits to the Groundwater Site Inventory database may be required and a consensus reached among the U.S. Geological Survey Water Science Centers to identify the outstanding workload categorized as in-office datum transformations or offset applications versus out-of-office survey efforts. Datum conversions or datum establishment for the inland or coastal gaging network should meet datum uncertainty requirements among other Federal agencies. Datum uncertainty requirements are ±0.25 foot for U.S. Army Corps of Engineers water-control or construction projects and ±0.16 foot for Federal Emergency Management Agency field surveys and checkpoint surveys used for mapping. River level forecasts generally are defined as ± 0.10 foot among the National Oceanic and Atmospheric Administration–National Weather Service. Collaboration and communication among the cooperative water community is necessary during a datum conversion or datum change. Datum notification time-change requirements set by the National Oceanic and Atmospheric Administration–National Weather Service vary from 30 to 120 days, depending on datum conversion or datum-change case scenarios. Notification times associated with these case scenarios may be useful to the National Oceanic and Atmospheric Administration–National Weather Service and U.S. Army Corps of Engineers, because their daily operations are time sensitive, unlike the notification time change requirements of other entities that make up the cooperative water community. At the time of this writing, a future geopotential datum resulting from Gravity for the Redefinition of the American Vertical Datum is anticipated in 2022. A future version of VDatum and VERTCON is anticipated to provide a transformation among North American Vertical Datum of 1988 elevations to the new geopotential datum.

Techniques and Methods↗

USGS1994

Geologic framework of the Aleutian arc, Alaska

The Aleutian arc is the arcuate arrangement of mountain ranges and flanking submerged margins that forms the northern rim of the Pacific Basin from the Kamchatka Peninsula (Russia) eastward more than 3,000 km to Cooke Inlet (Fig. 1). It consists of two very different segments that meet near Unimak Pass: the Aleutian Ridge segment to the west and the Alaska Peninsula-the Kodiak Island segment to the east. The Aleutian Ridge segment is a massive, mostly submerged cordillera that includes both the islands and the submerged pedestal from which they protrude. The Alaska Peninsula-Kodiak Island segment is composed of the Alaska Peninsula, its adjacent islands, and their continental and insular margins. The Bering Sea margin north of the Alaska Peninsula consists mostly of a wide continental shelf, some of which is underlain by rocks correlative with those on the Alaska Peninsula. There is no pre-Eocene record in rocks of the Aleutian Ridge segment, whereas rare fragments of Paleozoic rocks and extensive outcrops of Mesozoic rocks occur on the Alaska Peninsula. Since the late Eocene, and possibly since the early Eocene, the two segments have evolved somewhat similarly. Major plutonic and volcanic episodes, however, are not synchronous. Furthermore, uplift of the Alaska Peninsula-Kodiak Island segment in late Cenozoic time was more extensive than uplift of the Aleutian Ridge segment. It is probable that tectonic regimes along the Aleutian arc varied during the Tertiary in response to such factors as the directions and rates of convergence, to bathymetry and age of the subducting Pacific Plate, and to the volume of sediment in the Aleutian Trench. The Pacific and North American lithospheric plates converge along the inner wall of the Aleutian trench at about 85 to 90 mm/yr. Convergence is nearly at right angles along the Alaska Peninsula, but because of the arcuate shape of the Aleutian Ridge relative to the location of the plates' poles of rotation, the angle of convergence lessens to the west (Minster and Jordan, 1978). Along the central Aleutian Ridge, underthrusting is about 30° from normal to the volcanic axis. Motion between plates is approximately parallel along the western Aleutian Ridge. In this paper we briefly describe and interpret the Cenozoic evolution of the Aleutian arc by focusing on the onshore and offshore geologic frameworks in four of its sectors, two sectors each from the Aleutian Ridge and Alaska Peninsula-Kodiak Island segments (Fig. 1). We compare the geologic evolution of the segments and comment on the implications of some new, previously unpublished data.

Alaska↗

USGS1987

Oblique map of the northern Sierra Nevada, California, showing location of gold-bearing areas

More than a third of the gold produced by the United States was mined in California. The bulk of this gold was recovered from the western slope of the northern half of the Sierra Nevada between the Merced River in the south and the Feather River to the north, a distance of about 170 mi. Gold was first discovered, in this region, on the American River at Coloma in 1848, triggering the famed California gold rush. Mining was continuously active, somewhere in the area, from the discovery of gold until World War II when mining was legally prohibited. Dramatic increases in gold prices in the past decade coupled with recent advances in extractive techniques have revitalized prospecting, and major deposits are currently being explored and developed. Gold has been found in a variety of geologic environments in the region. In addition to production from the complex vein systems of the historically famous Mother Lode and associated East Gold Belt and West Gold Belt, large amounts of gold have also been recovered from the Grass Valley-Nevada City and other isolated lode districts and from Tertiary river channels and Quaternary alluvium. This oblique map illustrates the relation of the different gold-bearing environments to each other and to the general terrain of the northern Sierra Nevada. The map was derived from the 1970 U.S. Geological Survey 1:500,000-scale topographic map of California and the 1976 U.S. Geological Survey 1:500,000-scale topographic map of Nevada, using an isometrograph, a mechanical instrument that produces an oblique framework by tracing individual contours. Form lines sketched over this framework graphically portray the physiographic configuration of the region. Relief on the oblique map has a 3:1 vertical exaggeration and appears as if viewed from a 30° angle above the horizon. Locations of lode gold prospects and mines shown on the map were obtained from the U.S. Geological Survey's Mineral Resource Data System (MRDS), a computerized mineral-resource information file, and plotted in their respective locations (D.F. Huber, written commun., 1986). Some locations from two northern counties, missing from the MRDS retrival, were added. The twenty lode mines believed to be the most productive are cited in table 1. A total of nearly 4,000 sites, including both prospects and mines, were initially plotted, but about a third of those were obscured by topography on the oblique map. Locations of Tertiary river channels and gold-dredging fields were taken from published general references modified by examining specific sources and by cursory field examination. Seven of the major dredge fields are identified in table 2.

California↗

USGS2024

Data and knowledge gaps of a water bottling facility inventory and select water-use dataset, United States

In 2023, the U.S. Geological Survey developed a national inventory of water bottling facilities for the United States, including information about locations, water sources, water use, and a collection of other attributes. The purpose of the inventory was to provide information about water bottling facilities needed to assess and improve understanding of local-, regional-, and national-scale hydrologic and socioeconomic effects resulting from water extraction for bottling. Beverage types coded in the North American Industry Classification System under subsector 312 (Beverage and Tobacco Product Manufacturing) were compiled; however, facility information was often not publicly available, time intensive to search manually, and difficult to verify because there are no nationally available facility lists. A separate evaluation of facilities in the Great Lakes region identified some facilities that were missing and some with incorrect information. Ancillary facility attributes were primarily available from a proprietary business dataset and water-use data could only be acquired for a small subset of facilities. These limitations and deficiencies may affect the types of analyses that can be done using the inventory information. Therefore, the following data-quality aspects are used to describe the information compiled in the facility and water-use tables: completeness, uniqueness, validity, timeliness, accuracy, consistency, and accessibility. The resulting implications of the data and knowledge gaps are that users of the data may need to make additional evaluations of the inventory information for some analyses.

Scientific Investigations Report↗

USGS1995

Subduction cycles under western North America during the Mesozoic and Cenozoic eras

An extensive review of geologic and tectonic features of western North America suggests that the interaction of oceanic plates with the continent follows a broad cyclical pattern. In a typical cycle, periods of rapid subduction (7–15 cm/yr), andesitic volcanism, and trench-normal contraction are followed by a shift to trench-normal extension, the onset of voluminous silicic volcanism, formation of large calderas, and the creation of major batholiths. Extension becomes pervasive in metamorphic core complexes, and there is a shift to fundamentally basaltic volcanism, formation of flood basalts, widespread rifting, rotation of terranes, and extensive circulation of fluids throughout the plate margin. Strike-slip faulting becomes widespread with the creation of new tectonostratigraphic terranes. A new subduction zone forms and the cycle repeats. Each cycle is 50–80 m.y. long; cycles since the Triassic have ended and begun at approximately 225, 152, 92, 44, and 15 Ma. The youngest two cycles are diachronous, one from Oregon to Alaska, the other from central Mexico to California. The transitions from one cycle to the next cycle are characterized by rapid and pervasive changes termed, in this chapter, “major chaotic tectonic events.” These events appear to be related to the necking or breaking apart of the formerly subducted slab at shallow depth, the resulting delamination of the plate margin, and the onset of a new subduction cycle. These are times of the most rapid apparent and true polar wander of the North American plate, when the plate appears most free to move relative to surrounding plates and relative to the mantle below the asthenosphere. In western North America, magmatism and tectonics during the Jurassic period are quite similar to magmatism and tectonics since mid-Cretaceous time except strike-slip faulting shifted in sense from left lateral to right lateral.

North America, Pacific Ocean↗

USGS2024

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota↗

USGS2023

The usability gap in water resources open data and actionable science initiatives

The open data movement represents a major advancement for informed water management. Data that are findable, accessible, interoperable, and reusable—or FAIR —are now prerequisite to responsible data stewardship. In contrast to FAIR, accessibility and usability case studies and guidelines designed around human access and understanding are lacking in the literature, especially for water resources. Such decision support guidelines are critical because (i) inherent visual design trade-offs are not best made using intuition or feedback (perceived preference), and (ii) choosing designs requires a nuanced understanding of why and how the design works (revealed effectiveness). Thus, the goal of this commentary is to highlight knowledge gaps and discuss a general usability testing method which can be applied to any water resources decision support product. The user-testing approach includes (i) interviews about visualization goals, audiences, and the uses and decisions made with the data products, (ii) diagnosis of usability challenges, and (iii) redesign of decision support products given best practices and control versus treatment with intended end-user audiences. We illustrate the method using high-profile U.S. Geological Survey water science products. In sum, optimizing and testing for usability and understandability are as central to stakeholder use as FAIR standards are, and warrant being part of the development of data products and geovisualizations.

Journal of the American Water Resources Associatio↗

USGS2000

Potential seismic hazards and tectonics of the upper Cook Inlet basin, Alaska, based on analysis of Pliocene and younger deformation

The Cook Inlet basin is a northeast-trending forearc basin above the Aleutian subduction zone in southern Alaska. Folds in Cook Inlet are complex, discontinuous structures with variable shape and vergence that probably developed by right-transpressional deformation on oblique-slip faults extending downward into Mesozoic basement beneath the Tertiary basin. The most recent episode of deformation may have began as early as late Miocene time, but most of the deformation occurred after deposition of much of the Pliocene Sterling Formation. Deformation continued into Quaternary time, and many structures are probably still active. One structure, the Castle Mountain fault, has Holocene fault scarps, an adjacent anticline with flower structure, and historical seismicity. If other structures in Cook Inlet are active, blind faults coring fault-propagation folds may generate M w 6–7+ earthquakes. Dextral transpression of Cook Inlet appears to have been driven by coupling between the North American and Pacific plates along the Alaska-Aleutian subduction zone, and by lateral escape of the forearc to the southwest, due to collision and indentation of the Yakutat terrane 300 km to the east of the basin.

Alaska↗

USGS1991

Neogene rotations and quasicontinuous deformation of the Pacific Northwest continental margin

Paleomagnetically determined rotations about vertical axes of 15 to 12 Ma flows of the Miocene Columbia River Basalt Group of Oregon and Washington decrease smoothly with distance from the plate margin, consistent with a simple physical model for continental deformation that assumes the lithosphere behaves as a thin layer of fluid. The average rate of northward translation of the continental margin since 15 Ma calculated from the rotations, using this model, is about 15 mm/yr, which suggests that much of the tangential motion between the Juan de Fuca and North American plates since middle Miocene time has been taken up by deformation of North America. The fluid-like character of the large-scale deformation implies that the brittle upper crust follows the motions of the deeper parts of the lithosphere.

Geology↗

USGS1998

Validity of using semipermeable membrane devices for determining aqueous concentrations of freely dissolved PAHs

An in-depth review of the recent contribution to this journal by Gustafson and Dickhut [1] prompts us to share our concerns regarding some of their conclusions. The paper presents data comparing three techniques for determining aqueous concentrations of freely dissolved polycyclic aromatic hydrocarbons (PAHs) gas sparging, lipid-containing semipermeable membrane devices (SPMDs) of the U.S. Geological Survey (USGS) design, and filtration followed by sorption using XAD-2 resin. Space limitations force us to limit our comments to problems resulting from an apparent lack of understanding of how SPMDs function. Several recent publications [2–13] have described the theoretical and practical considerations of SPMD usage. Gustafson and Dickhut fail to cite any papers describing SPMDs published after 1992, even though some 18 papers have been published in American and European journals since then and several SPMD studies have been presented at many major meetings.

Environmental Toxicology and Chemistry↗

USGS2010

Radiocarbon dating of small terrestrial gastropod shells in North America

Fossil shells of small terrestrial gastropods are commonly preserved in wetland, alluvial, loess, and glacial deposits, as well as in sediments at many archeological sites. These shells are composed largely of aragonite (CaCO3) and potentially could be used for radiocarbon dating, but they must meet two criteria before their 14C ages can be considered to be reliable: (1) when gastropods are alive, the 14C activity of their shells must be in equilibrium with the 14C activity of the atmosphere, and (2) after burial, their shells must behave as closed systems with respect to carbon. To evaluate the first criterion, we conducted a comprehensive examination of the 14C content of the most common small terrestrial gastropods in North America, including 247 AMS measurements of modern shell material (3749 individual shells) from 46 different species. The modern gastropods that we analyzed were all collected from habitats on carbonate terrain and, therefore, the data presented here represent worst-case scenarios. In sum, ~78% of the shell aliquots that we analyzed did not contain dead carbon from limestone or other carbonate rocks even though it was readily available at all sites, 12% of the aliquots contained between 5 and 10% dead carbon, and a few (3% of the total) contained more than 10%. These results are significantly lower than the 20-30% dead carbon that has been reported previously for larger taxa living in carbonate terrain. For the second criterion, we report a case study from the American Midwest in which we analyzed fossil shells of small terrestrial gastropods (7 taxa; 18 AMS measurements; 173 individual shells) recovered from late-Pleistocene sediments. The fossil shells yielded 14C ages that were statistically indistinguishable from 14C ages of well-preserved plant macrofossils from the same stratum. Although just one site, these results suggest that small terrestrial gastropod shells may behave as closed systems with respect to carbon over geologic timescales. More work on this subject is needed, but if our case study site is representative of other sites, then fossil shells of some small terrestrial gastropods, including at least five common genera, Catinella, Columella, Discus, Gastrocopta, and Succinea, should yield reliable 14C ages, regardless of the local geologic substrate. ?? 2010.

Quaternary Geochronology↗