Geology ReportsSearch

SEARCH · Geology Reports

Results for “npj Clean Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

467 records · Page 4Linked to original sources

Subsurface water ice mapping on Mars: A probabilistic approach

Subsurface water ice deposits on Mars are an important resource for potential future human exploration. They are also an indicator of the planet’s past climate. However, the distribution of subsurface water ice in Mars’s midlatitudes is uncertain because spacecraft imagery cannot directly observe subsurface ice in most cases. Various spacecraft remote sensing instruments are sensitive to subsurface water ice, including thermal imaging spectrometers, radar sounders, and neutron spectrometers. Geomorphic analyses of images can also implicate subsurface ice. Building upon the data products from the Mars Subsurface Water Ice Mapping project, we provide a probabilistic framework to jointly interpret existing data and estimate the likelihood of subsurface water ice in the Martian midlatitudes between 60 ∘ S and 60 ∘ N with uncertainty. Broadly, we find that near-surface ice is likely present poleward of ∼45 ∘ in both the northern and southern hemispheres. However, closer to the equator, existing remote sensing data cannot uniquely constrain the presence of subsurface water ice. Our probabilistic results provide a framework for quantifying the abundance of ice on Mars, and our uncertainty estimates allow future analysis and exploration to target regions of high uncertainty.

Planetary Science Journal

Emerging investigator series: Post-wildfire sediment geochemical characterization reveals manganese reactivity and a potential link to water quality impairment in the Gallinas Creek watershed, New Mexico

Water quality post-wildfire is often impaired by increased turbidity and elevated concentrations of elements such as manganese (Mn) and iron (Fe). Precipitation events exacerbate these issues, due in part to increased erosion and transport of sediment from hillslopes to surface water. Both Mn and Fe are major redox-active elements in sediments that drive a variety of biogeochemical cycles, precipitate adsorptive phases, and can themselves be drinking water contaminants. By investigating Mn and Fe sediment geochemistry in post-wildfire sediment deposits, related water quality hazards can be assessed. To establish and strengthen this connection, we analyzed the geochemistry of sediment deposits and surface water in the Gallinas Creek watershed, New Mexico over 1.5 years post-wildfire. Analyses included particle size analysis, water extractions, sequential extractions and aqua regia extractions to determine metal partitioning in sediment deposits. Data demonstrate Mn concentrations were distributed across labile and reactive fractions, such as the exchangeable and oxyhydroxide fractions, while Fe concentrations were mainly associated with the residual fraction. Manganese concentrations in aqua regia extractions and several fractions of sequential extractions were also strongly and significantly correlated with fine-grained sediment while the same pools of Fe concentrations were not. Dissolved Mn concentrations in surface water were elevated (>50 μg L −1 ) multiple times over the 1.5 years post-wildfire, highlighting a relationship between sediment geochemistry and water quality. This work shows Mn in sediments mobilized post-wildfire has an influence on water quality and highlights how further investigation into Mn sediment redox processes and mineralogy post-wildfire can inform risk assessments and resource management.

New Mexico

Assessment of the hydraulic connection between ground water and the Peace River, west-central Florida

The hydraulic connection between the Peace River and the underlying aquifers along the length of the Peace River from Bartow to Arcadia was assessed to evaluate flow exchanges between these hydrologic systems. Methods included an evaluation of hydrologic and geologic records and seismic-reflection profiles, seepage investigations, and thermal infrared imagery interpretation. Along the upper Peace River, a progressive long-term decline in streamflow has occurred since 1931 due to a lowering of the potentiometric surface of the Upper Floridan aquifer by as much as 60 feet because of intensive ground-water withdrawals for phosphate mining and agriculture. Another effect from lowering the potentiometric surface has been the cessation of flow at several springs located near and within the Peace River channel, including Kissengen Spring, that once averaged a flow of about 19 million gallons a day. The lowering of ground-water head resulted in flow reversals at locations where streamflow enters sinkholes along the streambed and floodplain. Hydrogeologic conditions along the Peace River vary from Bartow to Arcadia. Three distinctive hydrogeologic areas along the Peace River were delineated: (1) the upper Peace River near Bartow, where ground-water recharge occurs; (2) the middle Peace River near Bowling Green, where reversals of hydraulic gradients occur; and (3) the lower Peace River near Arcadia, where ground-water discharge occurs. Seismic-reflection data were used to identify geologic features that could serve as potential conduits for surface-water and ground-water exchange. Depending on the hydrologic regime, this exchange could be recharge of surface water into the aquifer system or discharge of ground water into the stream channel. Geologic features that would provide pathways for water movement were identified in the seismic record; they varied from buried irregular surfaces to large-scale subsidence flexures and vertical fractures or enlarged solution conduits. Generally, the upper Peace River is characterized by a shallow, buried irregular top of rock, numerous observed sinkholes, and subsidence depressions. The downward head gradient provides potential for the Peace River to lose water to the ground-water system. Along the middle Peace River area, head gradients alternate between downward and upward, creating both recharging and discharging ground-water conditions. Seismic records show that buried, laterally continuous reflectors in the lower Peace River pinch out in the middle Peace River streambed. Small springs have been observed along the streambed where these units pinch out. This area corresponds to the region where highest ground-water seepage volumes were measured during this study. Further south, along the lower Peace River, upward head gradients provide conditions for ground-water discharge into the Peace River. Generally, confinement between the surficial aquifer and the confined ground-water systems in this area is better than to the north. However, localized avenues for surface-water and ground-water interactions may exist along discontinuities observed in seismic reflectors associated with large-scale flexures or subsidence features. Ground-water seepage gains or losses along the Peace River were quantified by making three seepage runs during periods of: (1) low base flow, (2) high base flow, and (3) high flow. Low and high base-flow seepage runs were performed along a 74-mile length of the Peace River, between Bartow and Nocatee. Maximum losses of 17.3 cubic feet per second (11.2 million gallons per day) were measured along a 3.2-mile reach of the upper Peace River. The high-flow seepage run was conducted to quantify losses in the Peace River channel and floodplain between Bartow and Fort Meade. Seepage losses calculated during high-flow along a 7.2-mile reach of the Peace River, from the Clear Springs Mine bridge to the Mobil Mine bridge, were approximately 10 percent of the river flow, or 118 cubic feet per second. Calculated seepages along the Peace River in Hardee and De Soto Counties were inconclusive, because most seepages were within the range of discharge measurement error. Two continuous aerial thermal infrared imagery surveys were conducted to locate sites of ground-water discharge along the Peace River. Although temperature and hydrologic conditions were ideal to observe spring flow using thermal infrared imaging techniques, no sources of ground-water discharge were identified using this method. Diffuse ground-water seepage may, however, provide significant ground-water discharge.

Florida

Salinas Valley integrated hydrologic and reservoir operations models, Monterey and San Luis Obispo Counties, California

The area surrounding the Salinas Valley groundwater basin in Monterey and San Luis Obispo Counties of California is a highly productive agricultural area, contributes significantly to the local economy, and provides a substantial portion of vegetables and other agricultural commodities to the Nation. This region of California provides about half of the Nation’s lettuce, celery, broccoli, and spinach each year. Thus, this agricultural area provides significant volumes of agricultural products not just for California but the entire United States. Changes in population and increased agricultural development, which includes a shift toward more water-intensive crops, and climate variability, have put increasing demand on both surface water and groundwater resources in the valley. This has resulted in water management challenges in the Salinas Valley that are predominantly related to distribution of water supply throughout the basin. Where and when the water is present in the surface and subsurface does not coincide with where and when the water is needed. To deal with the distribution issue, historically water has been used conjunctively in the valley. Conjunctive use is a water management strategy that coordinates surface water and groundwater use to maximize water availability. Groundwater is used throughout the Salinas Valley to meet water demands when surface water supplies are insufficient. Availability of surface water is constrained by climate. Precipitation and streamflow vary seasonally and year to year. Although there are two reservoirs in the Salinas Valley to capture and store water during wet periods, the only conveyance of reservoir water to coastal agricultural areas is the Salinas River. Increasing demand on groundwater and surface water resources throughout the Salinas Valley has resulted in undesirable effects of unsustainable water use, such as surface water depletion, groundwater level declines, storage depletion in the principal aquifers, and seawater intrusion. To address these escalating issues, local communities, water management agencies, and groundwater sustainability agencies are evaluating how to sustainably manage both their surface water and groundwater resources. To meet water demands and reduce undesirable effects of unsustainable water use, continued conjunctive management of surface water and groundwater would ideally incorporate strategies to deal with increases in demand and a variable climate. To evaluate the challenging water management issues in the Salinas Valley, the U.S. Geological Survey, Monterey County Water Resource Agency, and the Salinas Valley Basin Groundwater Sustainability Agency developed a comprehensive suite of models that represent the Salinas Valley Hydrogeologic system called the Salinas Valley System Model. The Salinas Valley Geologic Framework was developed to characterize the subsurface using various topographic and geologic data sources, including information on hydrogeologic units, their surfaces and extents, geologic structures, lithology, and elevations from borehole data and cross sections, as well as details on faults and existing models. The Salinas Valley Watershed Model simulates the entire Salinas River watershed. Monthly surface water inflows into the integrated hydrologic model domain were simulated using the Salinas Valley Watershed Model. The historical model uses historical climate data, water and land use data, and reservoir releases to simulate agricultural operations, including landscape water demands, diversions, and reclaimed wastewater. The operational model adds an embedded reservoir operations framework to the simulation of the historical model that allows specified operational rules to simulate reservoir releases and changes in reservoir storage. The operational model assumes current reservoir operations and constant land use, which differs from historical conditions. Thus, the operational model is a hypothetical baseline model that can be used by local water managers to evaluate and quantify potential benefits of water supply projects. Together, the geologic framework, watershed, historical, and operational models form a tool that can be used to simulate irrigated agriculture and associated reservoir operations of the integrated hydrologic system of the Salinas Valley.

EarthArXiv

Salinas Valley integrated hydrologic and reservoir operations models, Monterey and San Luis Obispo Counties, California

The area surrounding the Salinas Valley groundwater basin in Monterey and San Luis Obispo Counties of California is a highly productive agricultural area, contributes substantially to the local economy, and provides a substantial portion of vegetables and other agricultural commodities to the Nation. This region of California provides about half of the Nation’s lettuce, celery, broccoli, and spinach each year. Thus, this agricultural area provides substantial volumes of agricultural products not just for California but for the United States. Changes in population and increased agricultural development, which includes a shift toward more water-intensive crops, and climate variability, have put increasing demand on both surface-water and groundwater resources in the valley. This situation has resulted in water management challenges in the Salinas Valley that generally relate to the distribution of the water supply throughout the basin. Where and when the water is present in the surface and subsurface does not coincide with where and when the water is needed. Historically, to deal with the distribution issue, water has been used conjunctively in the valley. Conjunctive use is a water management strategy that coordinates surface-water and groundwater use to maximize water availability. Groundwater is used throughout the Salinas Valley to meet water demands when surface-water supplies are insufficient. The availability of surface water is constrained by climate. Precipitation and streamflow vary seasonally and year to year. Although there are two reservoirs in the Salinas Valley to capture and store water during wet periods, the only conveyance of reservoir water to coastal agricultural areas is the Salinas River. Increasing demand for groundwater and surface-water resources throughout the Salinas Valley has resulted in undesirable effects from unsustainable water use, such as surface-water depletion, groundwater-level declines, storage depletion in the principal aquifers, and seawater intrusion. To address these escalating issues, local communities, water management agencies, and groundwater sustainability agencies are evaluating how to sustainably manage both their surface-water and groundwater resources. To meet water demands and reduce the undesirable effects of unsustainable water use, continued conjunctive management of surface water and groundwater would ideally incorporate strategies to deal with increases in demand and climate variability. To evaluate the challenging water management issues in the Salinas Valley, the U.S. Geological Survey, Monterey County Water Resources Agency, and the Salinas Valley Basin Groundwater Sustainability Agency developed a comprehensive suite of models that represent the Salinas Valley hydrogeologic system called the Salinas Valley System Model. The geologic framework is known as the Salinas Valley Geologic Framework and was developed to characterize the subsurface using various topographic and geologic data sources, including information on hydrogeologic units, their surfaces and extents, geologic structures, lithology, and elevations from borehole data and cross sections, as well as details on faults and existing models. The surface-water model is called the Salinas Valley Watershed Model and simulates the Salinas River watershed. Monthly surface-water inflows into the integrated hydrologic model domain were simulated using the Salinas Valley Watershed Model. The historical model uses historical climate data, water and land use data, and reservoir releases to simulate agricultural operations, including landscape water demands, diversions, and reclaimed wastewater. The operational model adds an embedded reservoir operations framework to the simulation of the historical model that allows specified operational rules to simulate reservoir releases and changes in reservoir storage. The operational model assumes current reservoir operations and constant land use, which differs from historical conditions. Thus, the operational model is a hypothetical baseline model that can be used by local water managers to evaluate and quantify potential benefits of water supply projects. Together, the geologic framework, watershed, historical, and operational models form a tool that can be used to simulate irrigated agriculture and associated reservoir operations of the integrated hydrologic system of the Salinas Valley.

California

Water use in Louisiana, 2020

The U.S. Geological Survey (USGS), in cooperation with the Louisiana Department of Transportation and Development, collected water-withdrawal and water-use data from a 2020 inventory of water withdrawals in Louisiana. In 2020, approximately 8,700 million gallons per day (Mgal/d) of water was withdrawn from groundwater and surface-water sources in Louisiana, which represented a 0.22-percent decrease from 2015. Total groundwater withdrawals were about 1,900 Mgal/d, an increase of 7.1 percent from 2015, and total surface-water withdrawals were about 6,800 Mgal/d, a decrease of 2.1 percent from 2015 to 2020. Total water withdrawals, in million gallons per day, in 2020 for the various categories of use were as follows: public supply, 720; industry, 2,100; power generation, 4,100; rural domestic, 39; livestock, 7.0; rice irrigation, 930; general irrigation, 250; and aquaculture, 590. From 2015 to 2020, Louisiana’s total withdrawals for public supply increased by 1.4 percent, industry decreased by 2.3 percent, power generation decreased by 4.9 percent, rural domestic decreased by 1.2 percent, livestock increased by 11 percent, rice irrigation increased by 13 percent, general irrigation increased by 12 percent, and aquaculture increased by 20 percent. About 51 percent (approximately 960 Mgal/d) of all groundwater withdrawn was from the Chicot aquifer system and 24 percent (approximately 450 Mgal/d) was withdrawn from the Mississippi River alluvial aquifer. Since 2015, withdrawals from the Chicot aquifer system increased by 13 percent, and withdrawals from the Mississippi River alluvial aquifer increased by 18 percent. About 72 percent (4,900 Mgal/d) of all surface water withdrawn was from the Mississippi River main stem. This value represents a 1.1-percent decrease in withdrawals from 2015 to 2020. All water-withdrawal and water-use data presented in this report should be considered estimates. Because of rounding, totals and percentages presented in the tables, figures, and text in the report may differ slightly from totals or percentages calculated individually.

Louisiana

Assessment of water chemistry of the Coconino aquifer in northeastern Arizona

The Coconino aquifer was investigated as a potential groundwater resource for the Hopi Tribe and Navajo Nation in northeastern Arizona. Basic groundwater chemistry, including major ions, total dissolved solids, and selected trace metal concentrations, are presented and analyzed to characterize the Coconino aquifer. The geochemical compositions of groundwater are associated with changes in geology and groundwater movement and are compared to drinking-water standards to determine suitable areas for potential groundwater resource development. Dissolved-solids concentrations in much of the Coconino aquifer water were higher than the U.S. Environmental Protection Agency’s secondary drinking-water standard of 500 milligrams per liter (mg/L) due to a buried halite body in the southeastern part of the study area. However, trace metal concentrations were generally low. Groundwater may need to be treated for high dissolved-solids concentrations before it is suitable for use as a resource for the Hopi Tribe and Navajo Nation.

Arizona

Groundwater salinity: Applying the specific conductance and water type proxy

Groundwater is increasingly needed for water supplies but may have limited utility in some locations because of its salinity. Salinity, often expressed as total dissolved solid (TDS), is frequently estimated using specific conductance (SC) measurements. However, the commonly used proxy (0.65 multiplied by SC to indicate TDS, common in many handheld meters) can result in inaccurate TDS estimates. First, the TDS–SC relationship is not linear over the entire concentration range of groundwater. Furthermore, the TDS (and salinity)–SC relationships vary substantially depending on the major-ion composition. Here we develop a proxy method utilizing SC and major-ion water type to estimate TDS and salinity specifically for groundwaters. Compared to most surface waters, groundwater tends to have a wider range of salinity (fresh to highly saline) and higher concentrations of bedrock-derived solutes such as carbonate ions, silica, and many other ions. The dataset used to develop the proxies includes water chemistry data from 149,059 discrete groundwater samples. The groundwater proxies, which employ nonlinear log–log relations, utilize five water types (HCO 3 , Cl, Ca-Mg-SO 4 , Na-K-SO 4 , and mixed waters), are accurate (median percent difference between TDS and salinity determined using the proxy compared to discrete measurements was <±0.8%) over a wide range of SC (up to 200 mS/cm), rapid, cost-effective, and can be measured on-site.

Groundwater

Detection of viral, bacterial, and protozoan pathogens and microbial source tracking markers in paired large- and small-volume water samples

When sampling for waterborne microbes, researchers may need to diverge from recommended sample volumes due to logistical constraints, novel targets, or challenging matrices, with little guidance about the potential impact on results. In field studies, we measured bacteria, viruses, and protozoa (15 quantitative polymerase chain reaction assays) in paired large- and small-volume samples to evaluate method performance and relevant factors. Concordance between methods was low. Large-volume ultrafiltration yielded more detections than small-volume sampling, especially for pathogens in groundwater. Greater microbial concentrations were associated with more frequent detections in small-volume samples and greater concordance between paired samples. Large-volume samples appeared to be more susceptible to diminished sensitivity from complex sample matrices. In laboratory studies, recovery of microbes was poorer for large- than small-volume methods, although large-volume methods more reliably detected low-concentration targets. Large-volume samples were less stable than small-volume samples during storage. Overall, large-volume sampling was superior for detecting pathogens but may underestimate concentrations; small-volume sampling was more prone to false negatives but was adequate when concentrations were relatively high, like we observed for microbial source tracking in surface waters.

Wisconsin

Ground-water flow in the surficial aquifer system and potential movement of contaminants from selected waste-disposal sites at Cecil Field Naval Air Station, Jacksonville, Florida

As part of the Installation Restoration Program, Cecil Field Naval Air Station, Jacksonville, Florida, is considering remedialaction alternatives to control the possible movement of contaminants from sites that may discharge to the surface. This requires a quantifiable understanding of ground-water flow through the surficial aquifer system and how the system will respond to any future stresses. The geologic units of interest in the study area consist of sediments of Holocene to Miocene age that extend from land surface to the base of the Hawthorn Group. The hydrogeology within the study area was determined from gamma-ray and geologists' logs. Ground-water flow through the surficial aquifer system was simulated with a seven-layer, finite-difference model that extended vertically from the water table to the top of the Upper Floridan aquifer. Results from the calibrated model were based on a long-term recharge rate of 6 inches per year, which fell in the range of 4 to 10 inches per year, estimated using stream hydrograph separation methods. More than 80 percent of ground-water flow circulates within the surficial-sand aquifer, which indicates that most contaminant movement also can be expected to move through the surficial-sand aquifer alone. The surficial-sand aquifer is the uppermost unit of the surficial aquifer system. Particle-tracking results showed that the distances of most flow paths were 1,500 feet or less from a given site to its discharge point. For an assumed effective porosity of 20 percent, typical traveltimes are 40 years or less. At all of the sites investigated, particles released 10 feet below the water table had shorter traveltimes than those released 40 feet below the water table. Traveltimes from contaminated sites to their point of discharge ranged from 2 to 300 years. The contributing areas of the domestic supply wells are not very extensive. The shortest traveltimes for particles to reach the domestic supply wells from their respective contributing areas ranged from 70 to 200 years.

Florida

Characterization and simulation of the quantity and quality of water in the Highland Lakes, Texas, 1983-92

The Highland Lakes, located in central Texas, are a series of seven reservoirs on the Colorado River (Lake Buchanan, Inks Lake, Lake Lyndon B. Johnson, Lake Marble Falls, Lake Travis, Lake Austin, and Town Lake). The reservoirs provide hydroelectric power for the area. In addition, Lake Austin and Town Lake also provide the public water supply for the Austin metropolitan area. Saline water released from Natural Dam Salt Lake during 1987&ndash;89 caused increased concern among water managers that high-salinity water entering the Highland Lakes could result in waterquality problems, necessitating additional treatment of the water. The maximum dissolved solids concentrations for the reservoirs after the saline inflow were about two to three times the average concentrations before the inflow. The maximum concentrations of chloride and sulfate after the inflow were about three to five times the average concentrations before the inflow. The concentrations of dissolved solids, chloride, and sulfate in Lake Buchanan, Inks Lake, Lake Lyndon B. Johnson, and Lake Marble Falls were less than the concentrations of the applicable water-quality standards by the end of 1990. Concentrations of these constituents in Lake Travis, Lake Austin, and Town Lake did not decrease to previous levels, which were less than the concentrations of the applicable waterquality standards, until the end of 1991. Constituent concentrations for Lake Buchanan and Inks Lake; for Lake Lyndon B. Johnson and Lake Marble Falls; and for Lake Travis, Lake Austin, and Town Lake were similar because of the relative storage capacities and location of tributary inflows. From the initial increase in constituent concentrations in Lake Buchanan (summer 1987) in response to the saline inflow, the high-salinity water passed through the entire Highland Lakes in about 3.5 years. A mathematical mass-balance model was used to simulate the input and movement of highsalinity water through the Highland Lakes and to estimate monthly mean concentrations of dissolved solids, chloride, and sulfate for wet, average, and dry hydrologic conditions. The simulated median monthly concentrations during the 10-year simulation period for each reservoir generally are larger for the average condition than for the wet condition and generally are larger for the dry condition than for the average condition. The simulated concentrations of dissolved solids, chloride, and sulfate decreased to levels less than the concentrations of the applicable water-quality standards in about 2 to 5 years after the saline water inflow of 1987&ndash;89 was simulated for the three hydrologic conditions. Results from the simulations indicate that saline inflows to the Highland Lakes similar to those of the releases from Natural Dam Salt Lake during 1987&ndash;89 are unlikely to cause large increases in future concentrations of dissolved solids, chloride, and sulfate in the Highland Lakes. The results also indicate that high-salinity water will continue to be diluted as it is transported downstream through the Highland Lakes, even during extended dry periods.

Texas

Determination of per- and polyfluoroalkyl substances in water by direct injection of matrix-modified centrifuge supernatant and liquid chromatography/tandem mass spectrometry with isotope dilution

A direct-injection liquid chromatography/tandem mass spectrometry method was developed to determine 34 per- and polyfluoroalkyl substances (PFAS), including selected branched isomers, in centrifuge supernatant of matrix-modified (amended with approximately 50 percent methanol) water samples. The method has been validated in reagent water, surface water, groundwater, and wastewater effluent. Other water types (for example, drinking water, untreated wastewater, and landfill leachate) have been analyzed by the method but not systematically validated. Recovery of isotope-dilution standards, added to each sample, may be used to assess method performance in nonvalidated matrices on a sample-by-sample basis. Using this method, PFAS concentrations were determined in the range of 2–2,000 nanograms per liter in water samples. This range can be extended by diluting concentrated samples. At circumneutral pH, most compounds are present in the environment in their ionized form, and data are reported as such (for example, perfluorooctanoic acid is referred to as “perfluorooctanoate” [PFOA], perfluorooctane sulfonic acid is referred to as “perfluorooctane sulfonate” [PFOS]). Sample preparation procedures were designed without the use of filtration and with minimum sample handling steps to mitigate procedural losses of target compounds due to sorption to surfaces. Further, isotope-dilution quantification allowed for the correction of bias that may result from procedural losses, matrix-induced signal suppression or enhancement, and other factors. Validation experiments to characterize bias and variability, method detection level, and holding time were done in four distinct water matrices—reagent water, surface water, treated wastewater effluent, and groundwater—at multiple concentration levels. Mean PFAS recoveries met data quality objectives of bias and variability studies in all four validation matrices except for two compounds with low and variable recovery in the reagent water matrix only. Isotope-dilution standards, treated as surrogate compounds, were analyzed in more than 1,500 customer-submitted environmental samples with aggregate recovery of 102.5±6.5 percent (mean±standard deviation). Maximum holding times for all target compounds in the four validation matrices were 28 days for refrigerated samples and 90 days for frozen samples.

Techniques and Methods

Chemical evolution and estimated flow velocity of water in the Trinity Aquifer, south-central Texas

Three permeable zones with varying lithology and water chemistry compose the Trinity aquifer, a principal source of water in the 5,500- square-mile study area in south-central Texas. The upper permeable zone locally yields small quantities of water to wells and was not included in this study. The middle permeable zone primarily is composed of limestone with minor amounts of dolostone. Terrigenous sand and marine limestone, with minor amounts of dolostone, are the principal lithologic units in the lower permeable zone. Dissolved solids concentrations range from 329 to 1,820 milligrams per liter in water samples from the middle permeable zone and from 518 to 3,030 milligrams per liter in water samples from the lower permeable zone. Principal hydrochemical facies in the middle permeable zone are calcium magnesium bicarbonate and calcium magnesium sulfate. Hydrochemical facies in ground-water samples from the lower permeable zone vary. Tritium concentrations as large as 5.3 tritium units in the southeastern part of the study area are indicative of relatively recent recharge. Results of a geochemical mass balance simulation along a flowpath in the middle permeable zone indicate a mass transfer of 4.25 millimoles per liter of dolomite dissolved, 5.74 millimoles per liter of gypsum dissolved, 0.46 millimole per liter of sodium chloride dissolved, 8.07 millimoles per liter of calcite precipitated, and 0.67 millimole per liter of calcium-for-sodium cation exchange between solid and aqueous phases. These results support dedolomitization as a principal chemical process in the middle permeable zone of the Trinity aquifer. Results of a simulation along a flowpath in the lower permeable zone indicate a mass transfer of 0.41 millimole per liter of dolomite dissolved, 0.001 millimole per liter of gypsum dissolved, 9.58 millimoles per liter of sodium chloride dissolved, 1.09 millimoles per liter of calcite precipitated, and 1.11 millimoles per liter of sodium-forcalcium cation exchange between solid and aqueous phases. Lower permeable zone processes indicate sodium chloride dissolution, dedolomitization, and cation exchange. Ground-water-flow velocities determined from adjusted carbon-14 ages, calculated using NETPATH, for selected flowpaths in the middle and lower permeable zones were about 1.7 feet per year and less than about 4.4 feet per year, respectively.

Texas

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2022

Potentiometric-surface and depth-to-water maps for spring 2022 were created for the Mississippi River Valley alluvial aquifer (MRVA) using groundwater-altitude data from 1,136 wells completed in the MRVA and from the altitude of the top of the water surface in area rivers from 160 streamgages. The potentiometric-surface and depth-to-water maps for 2022 were created to support investigations to characterize the MRVA as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the MRVA for spring 2022 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 340 feet (ft) above the North American Vertical Datum of 1988. The regional direction of groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient was into the depression, and near rivers, where the groundwater gradient can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in much of the Grand Prairie and Delta regions. Depth to water in the MRVA, spring 2022, by well ranged from 5.00 ft above land surface to 145.66 ft below land surface.

Mississippi River Valley alluvial aquifer

Water quality of selected springs and public-supply wells, Pine Ridge Indian Reservation, South Dakota, 1992-97

This report presents results of a water-quality study for the Pine Ridge Indian Reservation, South Dakota. The study was a cooperative effort between the U.S. Geological Survey and the Water Resources Department of the Oglala Sioux Tribe. Discharge and water-quality data were collected during 1992-97 for 14 contact springs located in the northwestern part of the Reservation. Data were collected to evaluate potential alternative sources of water supply for the village of Red Shirt, which currently obtains water of marginal quality from a well completed in the Inyan Kara aquifer. During 1995-97, water-quality data also were collected for 44 public-supply wells that serve about one-half of the Reservation's population. Quality-assurance sampling was used to evaluate the precision and accuracy of environmental samples. Ten of the springs sampled contact the White River Group, and four contact the Pierre Shale. Springs contacting the White River Group range from calcium bicarbonate to sodium bicarbonate water types. Two springs contacting the Pierre Shale have water types similar to this; however, sulfate is the dominant anion for the other two springs. In general, springs contacting the White River Group are shown to have better potential as alternative sources of water supply for the village of Red Shirt than springs contacting the Pierre Shale. Nine of the springs with better water quality were sampled repeatedly; however, only minor variability in water quality was identified. Six of these nine springs, of which five contact the White River Group, probably have the best potential for use as water supplies. Discharge from any of these six springs probably would provide adequate water supply for Red Shirt during most periods, based on a limited number of discharge measurements collected. Concentrations of lead exceeded the U.S. Environmental Protection Agency (USEPA) action level of 15 µg/L for three of these six springs. Five of these six springs also had arsenic concentrations that exceeded 10 µg/L, which could be problematic if the current maximum contaminant level (MCL) is lowered. Blending of water from one or more springs with water from the existing Inyan Kara well may be an option to address concerns regarding both quantity and quality of existing and potential sources. All nine springs that were sampled for indicator bacteria had positive detections on one or more occasions during presumptive tests. Although USEPA standards for bacteria apply only to public-water supplies, local residents using spring water for domestic purposes need to be aware of the potential health risks associated with consuming untreated water. One spring contacting the White River Group and two springs contacting the Pierre Shale exceeded 15 pCi/L for gross alpha; these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Nine springs were sampled for selected pesticides and tritium. The pesticides atrazine, carbaryl, and 2,4-D were not detected in any of the samples. The nine springs were analyzed for tritium in order to generally assess the age of the water and to determine if concentrations exceeded the MCL established for gross beta-particle activity. Tritium results indicated two springs are composed primarily of water recharged prior to atmospheric testing of nuclear bombs and two other springs have a relatively large percentage of test-era water. The remaining five springs had tritium values that indicated some percentage of test-era water; however, additional sampling would be needed to determine whether water is predominantly pre- or post-bomb age. Of the 44 public-supply wells sampled, 42 are completed in the Arikaree aquifer, one is completed in an alluvial aquifer, and one is completed in the Inyan Kara aquifer. Water from the alluvial well is a sodium bicarbonate water type, water from Arikaree aquifer ranges from calcium bicarbonate to sodium bicarbonate types, and water from the Inyan Kara well is a calcium sulfate bicarbonate type. Of the 44 wells sampled, 28 (64 percent) tested positive for indicator bacteria in presumptive tests. Because these were single samples that generally were collected upstream from chemical treatment feeders, positive detections do not necessarily constitute exceedances of drinking-water standards. A single sample from an Arikaree well exceeded the MCL for arsenic of 50 µg/L. Arsenic exceeded 10 µg/L for six additional Arikaree wells and for the alluvial well and the Inyan Kara well, which could be problematic if the current MCL is lowered. The alluvial well also exceeded the secondary maximum contaminant level (SMCL) for dissolved solids, which is non-enforceable, and the action level for lead. The Inyan Kara well exceeded the SMCL's for iron and for manganese and the MCL of 5 pCi/L for radium-226 and 228 combined. Several Arikaree wells exceeded SMCL's for either pH, sulfate, dissolved solids, iron, or manganese. One Arikaree well exceeded the MCL of 4.0 mg/L for fluoride and another exceeded the MCL of 10 mg/L for nitrite plus nitrate. Ten Arikaree wells equalled or exceeded 15 pCi/L for gross alpha; however, these values do not necessarily constitute exceedances of the MCL, which excludes radioactivity contributed by uranium and radon. Additional sampling using different analysis techniques would be needed to conclusively determine if any samples exceeded this MCL. Eight wells, all from the Arikaree aquifer, equalled or exceeded the proposed MCL of 20 µg/L for uranium and 33 wells (75 percent) equalled or exceeded one-half of the proposed MCL. Although this standard has only been proposed, additional information regarding the extent of elevated uranium concentrations in the Arikaree aquifer, and the geochemical processes involved, may be beneficial. It was determined from analyses of uranium isotope data for five wells that the source of elevated uranium concentrations is naturally occurring, rather than anthropogenic.

South Dakota

The U.S. Geological Survey National Water Quality Network—Groundwater, 2024

The U.S. Geological Survey (USGS) operates a National Water Quality Network (NWQN) to monitor trends in groundwater quality and assess emerging contaminants of concern. It is a “network of networks” with 81 subnetworks being sampled on a decadal time scale. Each year, 8 of the subnetworks are sampled. Subnetworks have 20–30 wells each and include studies of domestic supply wells or shallow groundwater (20–50 feet deep) underlying urban land use or agricultural land use. Currently there are 2,089 wells in the network. All wells are sampled for physical properties, nutrients, major ions, trace elements, per- and polyfluoroalkyl substances (PFAS), and a subset of wells are sampled for pesticides, volatile organic compounds, radionuclides, and microbiological contaminants.

Contiguous United States

Pesticides in surface water from three agricultural basins in south-central Georgia, 1993-97

Twenty-two of 43 pesticides analyzed were detected in 128 water samples collected from the Tucsawhatchee Creek, the Little River, and the Withlacoochee River. These streams drain agricultural basins in south-central Georgia and were sampled from March 1993 through June 1995. Herbicides were detected more frequently than insecticides. The most frequently detected herbicides were atrazine and metolachlor and the most frequently detected insecticide was carbaryl. Pesticide concentrations in the three streams were low and did not exceed U.S. Environmental Protection Agency drinking water standards. The maximum pesticide concentration was 2.6 mg/L (micrograms per liter) for propargite, a miticide detected in only one sample. The maximum concentrations of the remaining 21 pesticides were less than 0.25 mg/L. The median concentrations were equal to the method detection limit for all pesticides except atrazine (0.008 mg/L) and metolachlor (0.012 mg/L). The ratio of herbicide detections to nondetections was largest in the planting season, smaller in the harvest season and smallest in the fallow season for the three basins. The same pattern existed for the insecticide ratios in the Little River and the Withlacoochee River. Pairwise correlations between concentrations of atrazine and metolachlor, and four parameters (discharge, and concentrations of dissolved organic carbon, suspended organic carbon, and suspended sediment) were evaluated for each stream. The strongest correlations existed between metolachlor and mean daily discharge, and metolachlor and sediment in the Withlacoochee River. The only significant correlation for the Little River was between atrazine and suspended sediment.

Georgia

As above, so below? A framework for integrating long-term water quantity trends reveals divergent patterns in groundwater and low streamflow across the United States

Climate, land-use, and disturbance drive long-term global trends in groundwater levels and streamflow. At large scales, these trends are typically considered separately, despite the well-established concept that groundwater and surface water comprise a single resource. Joint trend assessment at national scales is challenging because it requires pairing and aggregating data from spatially disparate streamflow and groundwater monitoring sites for which no established framework exists. Here, we evaluate alternative approaches for integrating groundwater and streamflow data to enable joint trend analysis—a critical step toward understanding how water-budget components respond concurrently and interactively to environmental drivers. Mann–Kendall trends were computed for individual groundwater (annual mean depth) and streamflow (annual low of 7 d averages) sites across the U.S over 21- (2000–2020), 31- (1990–2020), and 41-year (1980–2020) periods. Regional Kendall trends were calculated using five spatially contiguous and noncontiguous regional classifications for aggregation based on subsurface (e.g. aquifer, geology) and surface (e.g. watershed, landscape) characteristics. Site-level results revealed contrasting trends, with tendencies toward increasing low flows (wetting) and increasing groundwater depths (drying). Agreement between streamflow and groundwater trends increased with regional aggregation and longer timeframes, though persistent skew toward streamflow wetting and groundwater drying remained. Results varied by region and trend period, with notable consistencies: unified drying in the West/Southwest and wetting in the Upper Midwest. Directional mismatches in long-term trends were prominent in the High Plains and Mississippi Alluvial Plain, whereas near-term mismatches were most evident in the Northwest. Aggregation by hydrologic landscape regions (HLR) yielded the greatest agreement between groundwater and streamflow trends. These findings indicate that coupled responses may represent combined influences of climate, relief, and geology, as captured by HLR, more strongly than geography or geology alone. Integrated water availability assessments may benefit from a multi-characteristic classification framework to treat groundwater and surface water as a unified resource.

Environmental Research: Water