Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “The Seismic Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
USGS2021

Modelling tilt noise caused by atmospheric processes at long periods for several horizontal seismometers at BFO—A reprise

Tilting of the ground due to loading by the variable atmosphere is known to corrupt very long period horizontal seismic records (below 10 mHz) even at the quietest stations. At BFO (Black Forest Observatory, SW-Germany), the opportunity arose to study these disturbances on a variety of simultaneously operated state-of-the-art broad-band sensors. A series of time windows with clear atmospherically caused effects was selected and attempts were made to model these ‘signals’ in a deterministic way. This was done by simultaneously least-squares fitting the locally recorded barometric pressure and its Hilbert transform to the ground accelerations in a bandpass between 100 and 3600 s periods. Variance reductions of up to 97 per cent were obtained. We show our results by combining the ‘specific pressure induced accelerations’ for the two horizontal components of the same sensor as vectors on a horizontal plane, one for direct pressure and one for its Hilbert transform. It turned out that at BFO the direct pressure effects are large, strongly position dependent and largely independent of atmospheric events for instruments installed on piers, while three post-hole sensors are only slightly affected. The infamous ‘cavity effects’ are invoked to be responsible for these large effects on the pier sensors. On the other hand, in the majority of cases all sensors showed very similar magnitudes and directions for the vectors obtained for the regression with the Hilbert transform, but highly variable from event to event especially in direction. Therefore, this direction most certainly has to do with the gradient of the pressure field moving over the station which causes a larger scale deformation of the crust. The observations are very consistent with these two fundamental mechanisms of how fluctuations of atmospheric surface pressure causes tilt noise. The results provide a sound basis for further improvements of the models for these mechanisms. The methods used here can already help to reduce atmospherically induced noise in long-period horizontal seismic records.

Geophysical Journal International↗
USGS2018

Seismic sensors record a hurricane’s roar

The instruments installed at Global Seismographic Network (GSN) stations were designed to record Earth’s vibrations, but they sometimes pick up sound waves from unexpected sources. For example, newly installed infrasound sensors at a station on Puerto Rico recorded the passage of Hurricane Maria on 20 September 2017.

Eos, Earth and Space Science News↗
USGS1966

Fluctuations of ground-water levels in Puerto Rico resulting from earthquakes (1959-1961)

During the Chilean earthquake of May 22, 1960, intensity 8.5, 4 of 8 wells in Puerto Rico equipped with automatic recorders, recorded seismic fluctuations . The maximum double amplitude, 0.05 ft, was recorded at a well in bedrock near Coamo. Double amplitudes in 3 other wells ranged from slightly less than .01 to .02 ft. Following the Puerto Rico earthquake of Aug. 2, 1961, intensity about 5.5, seismic fluctuations were recorded in 3 of 9 wells. The maximum double amplitude of these fluctuations ranged from .07 ft in a well in alluvium to .01 ft each in 2 wells in bedrock. Two wells showed seismic responses to both earthquakes and in both cases greater fluctuations resulted from the more distant but more intense Chilean quake. No lasting changes in water levels or yields of wells have been recorded as a result of quakes occurring during the period of record.

Conference Paper↗
USGS1990

Geophysical investigations in Jordan

A number of geophysical investigations have been undertaken in the Hashemite Kingdom of Jordan to provide data for understanding the tectonic framework, the pattern of seismicity, earthquake hazards and geothermal resources of the country. Both the historical seismic record and the observed recent seismicity point to the dominance of the Dead Sea Rift as the main locus of seismic activity but significant branching trends and gaps in the seismicity pattern are also seen. A wide variety of focal plane solutions are observed emphasizing the complex pattern of fault activity in the vicinity of the rift zone. Geophysical investigations directed towards the geothermal assessment of the prominent thermal springs of Zerga Ma'in and Zara are not supportive of the presence of a crustal magmatic source.

Tectonophysics↗
USGS2026

Bulk location and source mechanisms of repetitive long-period seismicity at Mount St. Helens in July 2005

The 2004–2008 eruption of Mount St. Helens exemplified the practical challenges of processing high seismic event rates and data volumes. This protracted multi-year eruptive sequence was accompanied by a near-continuous occurrence of long-period (LP, 0.5–5 Hz) seismicity, but network-based picks and locations have previously been performed for only a relatively small subset of the overall seismicity, and full-waveform source–mechanism inversions have previously been performed for just two event types during the eruption. We present a new workflow for the bulk detection, cluster picking, 3-D location, and full-waveform source–mechanism inversion of repetitive LP volcanic seismicity recorded by a local broadband seismic network. Our emphasis is on methods that: exploit waveform similarity (multiplets) commonly observed for volcanic LP seismicity swarms; can take into account 3-D topographic and velocity structure heterogeneity typical of volcanoes; can process high event rates with relatively low analyst burden; and do not require a priori catalogue picks or known waveform templates. We develop and illustrate the workflow using data from Mount St. Helens from 2005 June 29 to July 31, a time-window characterized by high-rate LP seismicity, including numerous lower amplitude small LPs, and for which relatively dense seismic network coverage is available. Approximately 40 per cent of seismicity (20 561 events out of 52 141 triggers) during 2005 June 29 to July 31 is repetitive enough to be grouped into 17 multiplets of at least 300 events. We present 3-D locations of the 17 multiplets, representing 20 076 events having picks from at least eight stations, along with full-waveform source mechanism inversions of the 17 separate multiplet stacks. Collectively, our seismic 3-D hypocentre distributions for 2005 June 29 to July 31 are compatible with sources around the margins of the upper conduit section that is associated with plug solidification. All location results indicate compact seismicity clusters, with the 17 multiplets spatially connected and collectively located at shallow depth, approximately ~ 775 m depth beneath the 1980s crater floor and directly beneath, or immediately adjacent to, the extruding dacite spine. The full-waveform source–mechanism inversions for the 17 multiplets generally indicate mechanisms dominated by volumetric components consistent with subhorizontal cracks along with minor contributions from subvertical cracks. The overall picture is that of a stack or plexus of subhorizontal cracks located at shallow depth beneath the extruding dacite spines, consistent with subhorizontal hydrofractures extending from the conduit margins into the surrounding wall rock; minor subvertical crack components of the mechanisms could possibly arise from surfaces parallel to the conduit wall, such as within the damage halo associated with degassing pathways.

Washington↗
USGS2019

Surface imaging functions for elastic reverse time migration

Reverse time migration is often used to interpret acoustic or three‐component seismic recordings by creating an image of subsurface seismic reflectors. Here I describe elastic reverse time migration imaging functions that are cast as waveform misfit sensitivity kernels of contrasts in material parameters across hypothetical seismic discontinuities, that is, specular reflectors. The proposed “surface” imaging functions are theoretically applicable to either reflected or converted waves in order to estimate the location and reflectivity of these discontinuities. The surface imaging functions, as well as volumetric sensitivity kernels that target point diffractors, are tested on sets of synthetic surface array recordings that sample the 3‐D seismic wavefield on simple 2‐D structures generated using a 2.5‐D spectral element method. These tests illustrate that in contrast with the volumetric sensitivity kernels, the reflectivity is generally dominated by a high‐amplitude peak that coincides with input locations of discontinuities. Passive recordings of microseismicity, shot gathers, or a combination thereof can be potentially interpreted with the new surface imaging functions to yield useful reflectivity images.

Journal of Geophysical Research Solid Earth↗
USGS1982

Intraslope basins in Northwest Gulf of Mexico; a key to ancient submarine canyons and fans

The hummocky, diapirically deformed Texas-Louisiana continental slope includes three major types of intraslope basins: blocked-canyon intraslope basin, interdomal basin, and collapse basin. Major sand bodies present in the blocked-canyon intraslope basins are used to determine the sedimentary history of the Tertiary and Quaternary of this area. During relative lowering of sea level, coarse silt and sand temporarily stored near the shelf break were transported by gravity mechanisms and deposited within submarine canyons tending to nullify diapiric movement. Seismic records show these sediments as transparent to semitransparent onlapping seismic reflections. During low stands and rises in sea level, large amounts of mud were transported mainly as mud turbidites (rec rded as indistinct, parallel, onlapping seismic reflections), and it is during this stage that diapiric activity begins. Pelagic and hemipelagic sediments dominate during sea level high stands (recorded as distinct parallel seismic reflections) and drape the canyons and surrounding sea floor. Extensive uplift breaks up the depositional units and eventually disrupts the continuity of canyon systems. Reconstruction of ancient submarine canyons can be achieved by correlating identified blocked-canyon basins; such a correlation is based on the assumption that only a few canyon systems presently exist.

Book chapter↗
USGS2011

Seismic calibration shots conducted in 2009 in the Imperial Valley, southern California, for the Salton Seismic Imaging Project (SSIP)

Rupture of the southern section of the San Andreas Fault, from the Coachella Valley to the Mojave Desert, is believed to be the greatest natural hazard facing California in the near future. With an estimated magnitude between 7.2 and 8.1, such an event would result in violent shaking, loss of life, and disruption of lifelines (freeways, aqueducts, power, petroleum, and communication lines) that would bring much of southern California to a standstill. As part of the Nation's efforts to prevent a catastrophe of this magnitude, a number of projects are underway to increase our knowledge of Earth processes in the area and to mitigate the effects of such an event. One such project is the Salton Seismic Imaging Project (SSIP), which is a collaborative venture between the United States Geological Survey (USGS), California Institute of Technology (Caltech), and Virginia Polytechnic Institute and State University (Virginia Tech). This project will generate and record seismic waves that travel through the crust and upper mantle of the Salton Trough. With these data, we will construct seismic images of the subsurface, both reflection and tomographic images. These images will contribute to the earthquake-hazard assessment in southern California by helping to constrain fault locations, sedimentary basin thickness and geometry, and sedimentary seismic velocity distributions. Data acquisition is currently scheduled for winter and spring of 2011. The design and goals of SSIP resemble those of the Los Angeles Region Seismic Experiment (LARSE) of the 1990's. LARSE focused on examining the San Andreas Fault system and associated thrust-fault systems of the Transverse Ranges. LARSE was successful in constraining the geometry of the San Andreas Fault at depth and in relating this geometry to mid-crustal, flower-structure-like decollements in the Transverse Ranges that splay upward into the network of hazardous thrust faults that caused the 1971 M 6.7 San Fernando and 1987 M 5.9 Whittier Narrows earthquakes. The project also succeeded in determining the depths and seismic-velocity distributions of several sedimentary basins, including the Los Angeles Basin, San Fernando Valley, and Antelope Valley. These results advanced our ability to understand and assess earthquake hazards in the Los Angeles region. In order to facilitate permitting and planning for the data collection phase of SSIP, in June of 2009 we set off calibration shots and recorded the seismic data with a variety of instruments at varying distances. We also exposed sections of buried clay drainage pipe near the shot points to determine the effect of seismic energy on the pipes. Clay drainage pipes are used by the irrigation districts in both the Coachella and Imperial Valleys to prevent ponding and remove salts and irrigation water. This report chronicles the calibration project. We present new near-source velocity data that are used to test the regression curves that were determined for the LARSE project. These curves are used to create setback tables to determine explosive charge size and for placement of shot points. We also found that our shots did not damage the irrigation pipes and that the ODEX drilling system did well in the clay rich soils of the Imperial Valley.

California↗
USGS2001

Earthquake triggering by seismic waves following the landers and hector mine earthquakes

The proximity and similarity of the 1992, magnitude 7.3 Landers and 1999, magnitude 7.1 Hector Mine earthquakes in California permit testing of earthquake triggering hypotheses not previously possible. The Hector Mine earthquake confirmed inferences that transient, oscillatory 'dynamic' deformations radiated as seismic waves can trigger seismicity rate increases, as proposed for the Landers earthquake1-6. Here we quantify the spatial and temporal patterns of the seismicity rate changes7. The seismicity rate increase was to the north for the Landers earthquake and primarily to the south for the Hector Mine earthquake. We suggest that rupture directivity results in elevated dynamic deformations north and south of the Landers and Hector Mine faults, respectively, as evident in the asymmetry of the recorded seismic velocity fields. Both dynamic and static stress changes seem important for triggering in the near field with dynamic stress changes dominating at greater distances. Peak seismic velocities recorded for each earthquake suggest the existence of, and place bounds on, dynamic triggering thresholds. These thresholds vary from a few tenths to a few MPa in most places, depend on local conditions, and exceed inferred static thresholds by more than an order of magnitude. At some sites, the onset of triggering was delayed until after the dynamic deformations subsided. Physical mechanisms consistent with all these observations may be similar to those that give rise to liquefaction or cyclic fatigue.

Nature↗
USGS2009

Composition and variation of noise recorded at the Yellowknife Seismic Array, 1991-2007

We analyze seismic noise recorded on the 18 short-period, vertical component seismometers of the Yellowknife Seismic Array (YKA). YKA has an aperture of 23 km and is sited on cratonic lithosphere in an area with low cultural noise. These properties make it ideal for studying natural seismic noise at periods of 1-3 s. We calculated frequency-wave number spectra in this band for over 6,000 time windows that were extracted once per day for 17 years (1991-2007). Slowness analysis reveals a rich variety of seismic phases originating from distinct source regions: R g waves from the Great Slave Lake; L g waves from the Atlantic, Pacific, and Arctic Oceans; and teleseismic P waves from the north Pacific and equatorial mid-Atlantic regions. The surface wave energy is generated along coastlines, while the body wave energy is generated at least in part in deep-water, pelagic regions. Surface waves tend to dominate at the longer periods and, just as in earthquake seismograms, L g is the most prominent arrival. Although the periods we study are slightly shorter than the classic double-frequency microseismic band of 4-10 s, the noise at YKA has clear seasonal behavior that is consistent with the ocean wave climate in the Northern Hemisphere. The temporal variation of most of the noise sources can be well fit using just two Fourier components: yearly and biyearly terms that combine to give a fast rise in microseismic power from mid-June through mid-October, followed by a gradual decline. The exception is the R g energy from the Great Slave Lake, which shows a sharp drop in noise power over a 2-week period in November as the lake freezes. The L g noise from the east has a small but statistically significant positive slope, perhaps implying increased ocean wave activity in the North Atlantic over the last 17 years. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗