Geology ReportsSearch

SEARCH · Geology Reports

Results for “Raw Data File”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

Satellite images of the September 2013 flood event in Lyons, Colorado

The U.S. Geological Survey (USGS) Special Applications Science Center (SASC) produced an image base map showing high-resolution remotely sensed data over Lyons, Colorado—a city that was severely affected by the flood event that occurred throughout much of the Colorado Front Range in September of 2013. The 0.5-meter WorldView-2 data products were created from imagery collected by DigitalGlobe on September 13 and September 24, 2013, during and following the flood event. The images shown on this map were created to support flood response efforts, specifically for use in determining damage assessment and mitigation decisions. The raw, unprocessed imagery were orthorectified and pan-sharpened to enhance mapping accuracy and spatial resolution, and reproduced onto a cartographic base map. These maps are intended to provide a snapshot representation of post-flood ground conditions, which may be useful to decisionmakers and the general public. The SASC also provided data processing and analysis support for other Colorado flood-affected areas by creating cartographic products, geo-corrected electro-optical and radar image mosaics, and GIS water cover files for use by the Colorado National Guard, the National Park Service, the U.S. Forest Service, and the flood response community. All products for this International Charter event were uploaded to the USGS Hazards Data Distribution System (HDDS) website (http://hdds.usgs.gov/hdds2/) for distribution.

Colorado

Geologic field notes and geochemical analyses of outcrop and drill core from Mesoproterozoic rocks and iron-oxide deposits and prospects of southeast Missouri

The U.S. Geological Survey, in cooperation with the Missouri Department of Natural Resources/Missouri Geological Survey, undertook a study from 1988 to 1994 on the iron-oxide deposits and their host Mesoproterozoic igneous rocks in southeastern Missouri. The project resulted in an improvement of our understanding of the geologic setting, mode of formation, and the composition of many of the known deposits and prospects and the associated rocks of the St. Francois terrane in Missouri. The goal for this earlier work was to allow the comparison of Missouri iron-oxide deposits in context with other iron oxide-copper ± uranium (IOCG) types of mineral deposits observed globally. The raw geochemical analyses were released originally through the USGS National Geochemical Database (NGDB, http://mrdata.usgs.gov). The data presented herein offers all of the field notes, locations, rock descriptions, and geochemical analyses in a coherent package to facilitate new research efforts in IOCG deposit types. The data are provided in both Microsoft Excel (Version Office 2010) spreadsheet format (*.xlsx) and MS-DOS text formats (*.txt) for ease of use by numerous computer programs.

Missouri

A working environment for digital planetary data processing and mapping using ISIS and GRASS GIS

Since the beginning of planetary exploration, mapping has been fundamental to summarize observations returned by scientific missions. Sensor-based mapping has been used to highlight specific features from the planetary surfaces by means of processing. Interpretative mapping makes use of instrumental observations to produce thematic maps that summarize observations of actual data into a specific theme. Geologic maps, for example, are thematic interpretative maps that focus on the representation of materials and processes and their relative timing. The advancements in technology of the last 30 years have allowed us to develop specialized systems where the mapping process can be made entirely in the digital domain. The spread of networked computers on a global scale allowed the rapid propagation of software and digital data such that every researcher can now access digital mapping facilities on his desktop. The efforts to maintain planetary missions data accessible to the scientific community have led to the creation of standardized digital archives that facilitate the access to different datasets by software capable of processing these data from the raw level to the map projected one. Geographic Information Systems (GIS) have been developed to optimize the storage, the analysis, and the retrieval of spatially referenced Earth based environmental geodata; since the last decade these computer programs have become popular among the planetary science community, and recent mission data start to be distributed in formats compatible with these systems. Among all the systems developed for the analysis of planetary and spatially referenced data, we have created a working environment combining two software suites that have similar characteristics in their modular design, their development history, their policy of distribution and their support system. The first, the Integrated Software for Imagers and Spectrometers (ISIS) developed by the United States Geological Survey, represents the state of the art for processing planetary remote sensing data, from the raw unprocessed state to the map projected product. The second, the Geographic Resources Analysis Support System (GRASS) is a Geographic Information System developed by an international team of developers, and one of the core projects promoted by the Open Source Geospatial Foundation (OSGeo). We have worked on enabling the combined use of these software systems throughout the set-up of a common user interface, the unification of the cartographic reference system nomenclature and the minimization of data conversion. Both software packages are distributed with free open source licenses, as well as the source code, scripts and configuration files hereafter presented. In this paper we describe our work done to merge these working environments into a common one, where the user benefits from functionalities of both systems without the need to switch or transfer data from one software suite to the other one. Thereafter we provide an example of its usage in the handling of planetary data and the crafting of a digital geologic map. ?? 2010 Elsevier Ltd. All rights reserved.

Conference Paper

Pollen counts from core 7, Clear Lake, Lake County, California

The U. S. Geological Survey recovered eight sediment cores from beneath Clear Lake, Lake County, California, in 1973. The locations of the core sites are shown in fig. 1; lithologic descriptions of the cores, as well as radiographs, have been given by Sims and Rymer (1975a-g, 1976). A list of the procedures followed in sampling the cores and a list of the samples taken may be found in Beaver and others (1975); fish remains from two of the cores have been studied by Casteel and others (1975, 1977a,1977b). This report gives raw count data for 72 pollen samples from core 7, a 27.4-m long core from the southern or Highlands Arm of the lake (fig. 1). Pollen counts for core 4, a 115-m core from the main basin of the lake, are given in Adam (1979); that core spans the time interval between the end of the penultimate glacial period, about 130,000 years ago, and the present.

California

X-ray powder data for uranium and thorium minerals

The U.S. Geological Survey has in preparation a comprehensive volume on the mineralogy of uranium and thorium. This work has been done as part of a continuing systematic survey of data on uranium and thorium minerals on behalf of the Division of Raw Materials, U.S. Atomic Energy Commission. Pending publication of this volume and in response to a widespread demand among workers in uranium and thorium mineralogy, the X-ray powder diffraction data for the known minerals that contain uranium or thorium as an essential constituent are presented here. The coverage is complete except for a few minerals for which there are no reliable data owing to lack of authentic specimens. With the exception of that for ianthinite, the new data either originated in the Geological Survey or in the Mineralogical Laboratory of Harvard University. Data from the literature or other sources were cross-checked against the files of standard patterns of these laboratories; the sources are indicated in the references. Data not accompanied by a reference were obtained from films in the Harvard Standard File and cross-checked as to the identity of the film with the Geological Survey's file. Minor differences can be expected in the d-spacings reported for the same specimens by different investigators because of the manner of preparation of the mount, the conditions of X-ray irradiation, and the method of photography and measurement of the film or chart. The Harvard and Geological Survey data all were obtained from films taken in 114-mm diameter cameras, using either ethyl cellulose and toluene or collodion spindle mounts and Straumanis-type film mounting. Unless otherwise indicated all patterns were taken with copper radiation (Kα 1.5418 A.) and nickel filter and data are given in Angstrom units. The d-spacings are not corrected for film shrinkage. The correction ordinarily is small and in general is less than either the variation in spacing arising from differences in experimental technique of different investigators, including the varying absorption of samples of different thickness and concentration, or the variation attending slight changes in the chemical composition of the mineral. Some uranium minerals give poor diffraction patterns. The best results are generally obtained by using relatively small diameter spindles and long exposures, with a take-off angle from teh X-ray tube of about 4°. It is sometimes advantageous to shield the film from fluorescence in the visible region excited by X-ray irradiation. Copper radiation is preferable. The patterns of a few uranium minerals are greatly impaired by heavy grinding of the sample. Light crushing of the coarse sample after mixing with about one-third its volume of coarsely powdered low-absorption glass is helpful. Many uranium minerals, such as the members of the torbernite group, readily lose zeolithic water or transform to lower hydrates at or near ordinary conditions of temperature and humidity and care should be taken to control this in the manner of preservation and preparation of the sample.

Trace Elements Investigations

Plan for assessment of the occurrence, status, and distribution of volatile organic compounds in aquifers of the United States

The occurrence of volatile organic compounds (VOCs) in water is of national concern because of their relatively high aqueous solubility, mobility, and persistence, because many are known or suspected carcinogens, because of their widespread use, and because they have been found in drinking-water supplies. Because of this national concern, VOCs were selected for National investigation (hereafter termed "National Synthesis") by the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program in 1994. The broad goals of this National Synthesis are to: (1) describe current water- quality conditions with respect to VOCs; (2) define trends, or lack of trends, in VOCs in surface and ground water; and (3) identify, describe, and explain causal relations among the occurrence and distribution of VOCs in surface water and ground water, and natural and human factors. The National Synthesis of VOCs in ground water has three objectives: (1) to describe their occurrence, status, and distribution; (2) to determine relations among VOCs in shallow ground water and natural and human factors; and (3) to determine, compare, and contrast the occurrence, transformation, transport, and fate of selected VOCs in the hydrologic cycle for several regionally or nationally important aquifer systems. The description of VOC occurrence, status, and distribution in ground water focuses on major aquifers of the United States. Occurrence describes the presence or absence of VOCs, their frequency of occurrence, and their ranges of concentrations. Status compares the concentrations of VOCs detected in relation to water-quality regulations or advisories, such as Maximum Contaminant Levels, Proposed Maximum Contaminant Levels, Maximum Contaminant Level Goals, and Health Advisories. Distribution describes the variability of VOCs in ground water, areally and by depth. This report describes the study design for conducting such an assessment. The assessment focuses on aquifers, or parts of aquifers, that are currently used or have the potential to be used as sources of water supplies, using data collected as part of local, State, and Federal ground-water monitoring programs since 1985. Assessment by aquifer and comparison of results among aquifers will be completed for those aquifers for which adequate spatial or depth-related data are available. Assessment of VOCs in aquifers also will be completed at regional and national scales. A set of criteria for well-network design, well construction, sample-collection methods, and methods of laboratory analysis must be met before VOC data are used for assessment. An appropriate well-network design will provide a generally unbiased, random, equal-area distribution of sampling sites throughout the aquifer, or part of the aquifer, of interest. Well-construction information must be sufficient to ensure that the hydrogeologic unit (or units) represented by the water level measured and the hydrologic unit (or units) contributing water to the well are known. In addition, the well construction and pumping equipment in the well need to be of a type that are not likely to affect concentrations of VOCs in the water sample. VOC data will be considered suitable for use in the occurrence assessment if nationally accepted methods for collection and analysis were used and if the quantitation level for VOC analytes was less than about 5 micrograms per liter; laboratory analysis was done by a laboratory certified by the U.S. Environ- mental Protection Agency; and the sample was collected from untreated (raw) water at or near the well head before being held in a pressure tank or holding tank.

Open-File Report

Selenium concentrations in irrigation drain inflows to the Salton Sea, California, October 2006 and January 2007

This report presents raw data on selenium concentrations in samples of water, sediment, detritus, and selected food-chain matrices collected from selected agricultural drains in the southern portion of the Salton Sea during October 2006 and January 2007. Total selenium and selenium species were determined in water samples, whereas total selenium was determined in sediment, detritus, algae, plankton, midge larvae (Family Chironomidae), and two fish species (western mosquitofish, Gambusia affinis , and sailfin molly, Poecilia latipinna ).

Open-File Report

Archive of single beam and swath bathymetry data collected nearshore of the Gulf Islands National Seashore, Mississippi, from West Ship Island, Mississippi, to Dauphin Island, Alabama: Methods and data report for USGS Cruises 08CCT01 and 08CCT02, July 2008, and 09CCT03 and 09CCT04, June 2009

During the summers of 2008 and 2009 the USGS conducted bathymetric surveys from West Ship Island, Miss., to Dauphin Island, Ala., as part of the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility project. The survey area extended from the shoreline out to approximately 2 kilometers and included the adjacent passes (fig. 1). The bathymetry was primarily used to create a topo-bathymetric map and provide a base-level assessment of the seafloor following the 2005 hurricane season. Additionally, these data will be used in conjunction with other geophysical data (chirp and side scan sonar) to construct a comprehensive geological framework of the Mississippi Barrier Island Complex. The culmination of the geophysical surveys will provide baseline bathymetry necessary for scientists to define and interpret seafloor habitat for this area and for scientists to predict future geomorpholocial changes of the islands with respect to climate change, storm impact, and sea-level rise. Furthermore, these data provide information for feasibility of barrier island restoration, particularly in Camille Cut, and for the preservation of historical Fort Massachusetts. For more information refer to http://ngom.usgs.gov/gomsc/mscip/index.html. Since bathymetric surveys have often been conducted for navigational purposes, soundings have traditionally been referenced to a water level datum using tide gages and tide models. Bathymetric measurements referenced to a Global Positioning System (GPS) is a more accurate way of representing water depth and has been implemented in the acquisition and processing procedures for these datasets. Previous single-beam bathymetric studies performed at the USGS Center for Coastal and Marine Science have successfully referenced bathymetric measurements to GPS (DeWitt and others, 2007; Hansen 2008 and 2009). The 2008-2009 bathymetry surveys were conducted as a test to (1) develop acquisition and processing technology utilizing both single beam and swath bathymetry survey methods together, (2) reference both types of measurements to GPS rather than water level, and (3) compare the differences between methods in acquisition and processing. Results of the survey are explained in greater detail within this report. To acquire suitable coverage of the study area in a limited time frame, the seafloor-elevation survey was conducted using three techniques: single-beam bathymetry, interferometric swath bathymetry, and a walking kinematic survey of the island shorelines. All three techniques utilized GPS measurements. Implementation of these techniques was executed concurrently yet independently aboard two research vessels: the RV Survey Cat , a 26-foot (ft) shallow-draft Glacier Bay Coastal Runner, and the 50-ft RV G.K. Gilbert . A portable push buggy with a rigid antenna mount served as the platform for the kinematic shoreline survey. Data from each survey technique was post-processed and edited independently with proper inclusion of the differentially processed external navigation files. The x,y,z components from each method were then combined and the two survey years (2008 and 2009) were merged into one dataset. The 2008 bathymetry data were processed at the USGS Center for Coastal and Marine Science in St. Petersburg, Fla., and the 2009 bathymetry data were processed at the USGS Coastal and Marine Science Center located in Woods Hole, Mass. This report serves as an archive of the processed single beam and interferometric swath bathymetry, outlines the methodology, and reports the results. Data products herein include gridded and interpolated digital depth surfaces, and x,y,z data products for both single beam and interferometric swath bathymetry. Additional files include trackline maps, navigation files, geographic information system (GIS) files, Field Activity Collection System (FACS) logs, and formal Federal Geographic Data Committee (FGDC) metadata. Scanned images of the handwritten FACS logs and digital FACS logs are also provided as PDF files. Refer to the Acronyms page for description of acronyms and abbreviations used in this report or hold the cursor over an acronym for a pop-up explanation. The USGS St. Petersburg Coastal and Marine Science Center assigns a unique identifier to each cruise or field activity. For example, 08CCT01 indicates that the data were collected in 2008 for the Coastal Change and Transport (CCT) study and the data were collected during the first (01) field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. See the digital FACS equipment log for details about the acquisition equipment used. Raw datasets are stored digitally at the USGS St. Petersburg Coastal and Marine Science Center and processed systematically using Novatel's GrafNav version 7.6, SANDS version 3.7, SEA SWATH plus version 3.06.04.03, CARIS HIPS AND SIPS version 3.6, and ESRI ArcGIS version 9.3.1. For more information on processing refer to the Equipment and Processing page. Chirp seismic data were also collected during these surveys and are archived separately.

Mississippi;Alabama

A Robot Operating System (ROS) package for mapping flow fields in rivers via Particle Image Velocimetry (PIV)

Non-contact, remote sensing approaches to measuring flow velocities in river channels are widely used, but typical workflows involve acquiring images in the field and then processing data later in the office. To reduce latency between acquisition and output, with the ultimate goal of enabling real-time image velocimetry, we developed a Robot Operating System (ROS) package for Particle Image Velocimetry (PIV) that can be deployed on an embedded computer aboard an uncrewed aircraft system (UAS). The ROSPIV package consists of a series of nodes that can be run in parallel and comprise an end-to-end PIV workflow. Software development involved converting MATLAB code to C++, organizing files within a catkin workspace, and building nodes using catkin_make . The codebase is available via a repository that includes a user’s guide and demo script. This paper describes the nodes in the ROSPIV package as well as functions for preparing inputs, facilitating code generation, and visualizing PIV output. To illustrate the application of the software, we present two examples, one based on a simulated image sequence and the other based on data acquired from a UAS. For the simulated data, the velocity field derived via the ROSPIV package closely matched the known flow field used to generate the image sequence. Using real data as input demonstrated the ability of the ROSPIV package to ingest and pre-process raw images. Our initial results suggest that the ROSPIV package could become a viable approach for mapping river surface velocities in real time.

Software X

Improve wildlife species tracking—Implementing an enhanced global positioning system data management system for California condors

U.S. Fish and Wildlife Service (USFWS) staff in the Pacific Southwest Region and at the Hopper Mountain National Wildlife Refuge Complex requested technical assistance to improve their global positioning system (GPS) data acquisition, management, and archive in support of the California Condor Recovery Program. The USFWS deployed and maintained GPS units on individual Gymnogyps californianus (California condor) in support of long-term research and daily operational monitoring and management of California condors. The U.S. Geological Survey (USGS) obtained funding through the Science Support Program to provide coordination among project participants, provide GPS Global System for Mobile Communication (GSM) transmitters for testing, and compare GSM/GPS with existing Argos satellite GPS technology. The USFWS staff worked with private companies to design, develop, and fit condors with GSM/GPS transmitters. The Movebank organization, an online database of animal tracking data, coordinated with each of these companies to automatically stream their GPS data into Movebank servers and coordinated with USFWS to improve Movebank software for managing transmitter data, including proofing/error checking of incoming GPS data. The USGS arranged to pull raw GPS data from Movebank into the USGS California Condor Management and Analysis Portal (CCMAP) ( https://my.usgs.gov/ccmap ) for production and dissemination of a daily map of condor movements including various automated alerts. Further, the USGS developed an automatic archiving system for pulling raw and proofed Movebank data into USGS ScienceBase to comply with the Federal Information Security Management Act of 2002. This improved data management system requires minimal manual intervention resulting in more efficient data flow from GPS data capture to archive status. As a result of the project’s success, Pinnacles National Park and the Ventana Wildlife Society California condor programs became partners and adopted the same workflow, tracking, and data archive system. This GPS tracking data management model and workflow should be applicable and beneficial to other wildlife tracking programs.

California

Pliocene planktic foraminifer census data from the North Atlantic region

INTRODUCTION: The U.S. Geological Survey is conducting a long-term study of the climatic and oceanographic conditions of the Pliocene known as PRISM (Pliocene Research, Interpretation, and Synoptic Mapping). One of the major elements of the study involves the use of quantitative composition of planktic foraminifer assemblages to estimate seasurface temperatures and identify major oceanographic boundaries and water masses (Dowsett, 1991; Dowsett and Poore, 1991; Dowsett et al., 1992; Dowsett et al., 1994). We have analyzed more than 900 samples from 19 core sites in the North Atlantic Basin (Fig. 1) resulting in a large volume of raw census data. These data are presented here together to facilitate comparison of North Atlantic faunal assemblages. Latitude, longitude, water depth, source of faunal data and source of data used to construct age model (or publication from which age model was taken) are provided for each locality in Table 1. All ages refer to the geomagnetic polarity time scale of Berggren et al. (1985). Counts of species tabulated in each sample are given in Tables 2-20. DSDP and ODP sample designations are abbreviated in Tables 2-20 as core-section, depth within section in centimeters (eg. 10-5, 34 = core 10, section 5, 34 cm below top of section 5).

Open-File Report

Data from theodolite measurements of creep rates on San Francisco Bay region faults, California

Introduction Our purpose is to annually update our creep-data archive on San Francisco Bay region active faults for use by the scientific research community. Earlier data (1979-2001) were reported in Galehouse (2002) and were analyzed and described in detail in a summary report (Galehouse and Lienkaemper, 2003). A complete analysis of our earlier results obtained on the Hayward Fault was presented in Lienkaemper, Galehouse and Simpson (2001) and updated in Lienkaemper and others (2012). Lienkaemper and others (2014) provide a new overview and analysis of fault creep along all sections of the northern San Andreas Fault system, from which they estimate by how much fault creep reduces the seismic hazard for each fault section. From 1979 until his retirement from the project in 2001, Jon Galehouse of San Francisco State University (SFSU) and many student research assistants measured creep (aseismic slip) rates on these faults. The creep measurement project, which was initiated by Galehouse, continued through the Geosciences Department at SFSU from 2001-2006 under the direction of Karen Grove and John Caskey (Grove and Caskey, 2005) and since 2006 under Caskey (2007). Forrest McFarland has managed most of the technical and logistical project operations, as well as data processing and compilation since 2001. Data from 2001-2007 are found in McFarland and others (2007). From 2009 onward, we have released the raw data annually using this report (OF2009-1119) as a permanent publication link, while publishing more detailed analyses of these data in the scientific literature, such as Lienkaemper and others (2014). We maintain a project Web site (http://funnel.sfsu.edu/creep/) that includes the following information: project description, project personnel, creep characteristics and measurement, map of creep-measurement sites, creep-measurement site information, and links to data plots for each measurement site. Our most current, annually updated results are, therefore, accessible to the scientific community and to the general public. Information about the project can currently be requested by the public by an email link ( fltcreep@sfsu.edu) found on our project Web site.

California

A multitemporal (1979-2009) land-use/land-cover dataset of the binational Santa Cruz Watershed

Trends derived from multitemporal land-cover data can be used to make informed land management decisions and to help managers model future change scenarios. We developed a multitemporal land-use/land-cover dataset for the binational Santa Cruz watershed of southern Arizona, United States, and northern Sonora, Mexico by creating a series of land-cover maps at decadal intervals (1979, 1989, 1999, and 2009) using Landsat Multispectral Scanner and Thematic Mapper data and a classification and regression tree classifier. The classification model exploited phenological changes of different land-cover spectral signatures through the use of biseasonal imagery collected during the (dry) early summer and (wet) late summer following rains from the North American monsoon. Landsat images were corrected to remove atmospheric influences, and the data were converted from raw digital numbers to surface reflectance values. The 14-class land-cover classification scheme is based on the 2001 National Land Cover Database with a focus on "Developed" land-use classes and riverine "Forest" and "Wetlands" cover classes required for specific watershed models. The classification procedure included the creation of several image-derived and topographic variables, including digital elevation model derivatives, image variance, and multitemporal Kauth-Thomas transformations. The accuracy of the land-cover maps was assessed using a random-stratified sampling design, reference aerial photography, and digital imagery. This showed high accuracy results, with kappa values (the statistical measure of agreement between map and reference data) ranging from 0.80 to 0.85.

Arizona

Archive of single-beam bathymetry data collected during USGS cruise 07CCT01 nearshore of Fort Massachusetts and within Camille Cut, West and East Ship Islands, Gulf Islands National Seashore, Mississippi, July 2007

The Gulf Islands National Seashore (GUIS) is composed of a series of barrier islands along the Mississippi - Alabama coastline. Historically these islands have undergone long-term shoreline change. The devastation of Hurricane Katrina in 2005 prompted questions about the stability of the barrier islands and their potential response to future storm impacts. Additionally, there was concern from the National Park Service (NPS) about the preservation of the historical Fort Massachusetts, located on West Ship Island. During the early 1900s, Ship Island was an individual island. In 1969 Hurricane Camille breached Ship Island, widening the cut and splitting it into what is now known as West Ship Island and East Ship Island. In July of 2007, the U.S. Geological Survey (USGS) was able to provide the NPS with a small bathymetric survey of Camille Cut using high-resolution single-beam bathymetry. This provided GUIS with a post-Katrina assessment of the bathymetry in Camille Cut and along the northern shoreline directly in front of Fort Massachusetts. Ultimately, this survey became an initial bathymetry dataset toward a larger USGS effort included in the Northern Gulf of Mexico (NGOM) Ecosystem Change and Hazard Susceptibility Project ( http://ngom.usgs.gov/gomsc/mscip/ ). This report serves as an archive of the processed single-beam bathymetry. Data products herein include gridded and interpolated digital depth surfaces and x,y,z data products. Additional files include trackline maps, navigation files, geographic information system (GIS) files, Field Activity Collection System (FACS) logs, and formal Federal Geographic Data Committee (FGDC) metadata. Scanned images of the handwritten FACS logs and digital FACS logs are also provided as PDF files. Refer to the Acronyms page for description of acronyms and abbreviations used in this report or hold the cursor over an acronym for a pop-up explanation. The USGS St. Petersburg Coastal and Marine Science Center assigns a unique identifier to each cruise or field activity. For example, 07CCT01 tells us the data were collected in 2007 for the Coastal Change and Transport (CCT) study and the data were collected during the first (01) field activity for that project in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. Data were collected using a 26-foot (ft) Glacier Bay catamaran. The single-beam transducers were sled mounted on a rail attached between the catamaran hulls. Navigation was acquired using HYPACK, Inc., Hypack version 4.3a.7.1 and differentially corrected using land-based GPS stations. See the digital FACS equipment log for details about the acquisition equipment used. Raw datasets were stored digitally and processed systematically using NovAtel's Waypoint GrafNav version 7.6, SANDS version 3.7, and ESRI ArcGIS version 9.3.1. For more information on processing refer to the Equipment and Processing page.

Mississippi

Tilt changes of short duration

Section I of this report contains a classification scheme for short period tilt data. For convenience, all fluctuations in the local tilt field of less than 24 hours duration will be designated SP (i.e., short period) tilt events. Three basic categories of waveshape appearance are defined, and the rules for naming the waveforms are outlined. Examples from tilt observations at four central California sites are provided. Section II contains some coseismic tilt data. Fourteen earthquakes in central California, ranging in magnitude from 2.9 to 5.2, were chosen for study on four tiltmeters within 10 source dimensions of the epicenters. The raw records from each of the four tiltmeters at the times of the earthquakes were photographed and are presented in this section. Section III contains documentation of computer programs used in the analysis of the short period tilt data. Program VECTOR computes the difference vector of a tilt event and displays the sequence of events as a head-to-tail vector plot. Program ONSTSP 1) requires two component digitized tilt data as input, 2) scales and plots the data, and 3) computes and displays the amplitude, azimuth, and normalized derivative of the tilt amplitude. Program SHARPS computes the onset sharpness, (i.e., the normalized derivative of the tilt amplitude at the onset of the tilt event) as a function of source-station distance from a model of creep-related tilt changes. Program DSPLAY plots the digitized data.

Open-File Report

Data release of reprocessed select National Uranium Resources Evaluation program samples in Wyoming

The U.S. Atomic Energy Commission established the National Uranium Resources Evaluation (NURE) program in 1973 to identify uranium resources throughout the United States. Part of this program focused on the collection of stream-sediment samples and subsequent geochemical analyses of these samples for uranium, in addition to 47 other elements. As part of the original program, 18,424 stream-sediment samples were collected from Wyoming and analyzed. All original samples are stored at the U.S. Geological Survey’s (USGS) National Geochemical Sample Archive (NGSA). The Wyoming State Geological Survey (WSGS) recently selected 159 of the original Wyoming NURE stream samples to be reanalyzed using modern and standardized analytical equipment. The raw results of the reanalysis are provided with this report.

Wyoming

A Servicewide Benthic Mapping Program for National Parks

In 2007, the National Park Service (NPS) Inventory and Monitoring Program directed the initiation of a benthic habitat mapping program in ocean and coastal parks in alignment with the NPS Ocean Park Stewardship 2007-2008 Action Plan. With 74 ocean and Great Lakes parks stretching over more than 5,000 miles of coastline across 26 States and territories, this Servicewide Benthic Mapping Program (SBMP) is essential. This program will deliver benthic habitat maps and their associated inventory reports to NPS managers in a consistent, servicewide format to support informed management and protection of 3 million acres of submerged National Park System natural and cultural resources. The NPS and the U.S. Geological Survey (USGS) convened a workshop June 3-5, 2008, in Lakewood, Colo., to discuss the goals and develop the design of the NPS SBMP with an assembly of experts (Moses and others, 2010) who identified park needs and suggested best practices for inventory and mapping of bathymetry, benthic cover, geology, geomorphology, and some water-column properties. The recommended SBMP protocols include servicewide standards (such as gap analysis, minimum accuracy, final products) as well as standards that can be adapted to fit network and park unit needs (for example, minimum mapping unit, mapping priorities). SBMP Mapping Process. The SBMP calls for a multi-step mapping process for each park, beginning with a gap assessment and data mining to determine data resources and needs. An interagency announcement of intent to acquire new data will provide opportunities to leverage partnerships. Prior to new data acquisition, all involved parties should be included in a scoping meeting held at network scale. Data collection will be followed by processing and interpretation, and finally expert review and publication. After publication, all digital materials will be archived in a common format. SBMP Classification Scheme. The SBMP will map using the Coastal and Marine Ecological Classification Standard (CMECS) that is being modified to include all NPS needs, such as lacustrine ecosystems and submerged cultural resources. CMECS Version III (Madden and others, 2010) includes components for water column, biotic cover, surface geology, sub-benthic, and geoform. SBMP Data Archiving. The SBMP calls for the storage of all raw data and final products in common-use data formats. The concept of 'collect once, use often' is essential to efficient use of mapping resources. Data should also be shared with other agencies and the public through various digital clearing houses, such as Geospatial One-Stop (http://gos2.geodata.gov/wps/portal/gos). To be most useful for managing submerged resources, the SBMP advocates the inventory and mapping of the five components of marine ecosystems: surface geology, biotic cover, geoform, sub-benthic, and water column. A complete benthic inventory of a park would include maps of bathymetry and the five components of CMECS. The completion of mapping for any set of components, such as bathymetry and surface geology, or a particular theme (for example, submerged aquatic vegetation) should also include a printed report.

Open-File Report

Adjusted geomagnetic data—Theoretical basis and validation

Adjusted geomagnetic data are magnetometer measurements with provisional correction factors applied such that vector quantities are oriented in a local Cartesian frame in which the X axis points north, the Y axis points east, and the Z axis points down. These correction factors are determined from so-called absolute measurements, which are “ground truth” observations made in the field using specialized magnetometers and survey equipment that are (nearly) colocated with the automated and continuously running magnetic measurement instrumentation. Correction factors can be substantial, up to hundreds of nanoTeslas, depending on the geologic and geomagnetic characteristics of the observatory site. They also tend to evolve over time because of instrument response instability and changing site characteristics. Historically, correction factors were determined offline, up to 1 year or more post-measurement, and applied to raw measurements to produce “Definitive” data for scientific analysis. Growing demand for corrected real-time geomagnetic data to better support space weather operations motivated development of an “Adjusted” geomagnetic data product. Modern computational tools, and some notable practical concerns, dictated a transition to affine transformations in lieu of more traditional baseline corrections, as well as a calibration parameter estimation algorithm that is more robust and statistically optimal, and therefore better suited for automated and unsupervised execution. A theoretical basis for this algorithm is presented, along with a demonstration and validation based on a comparison of results obtained with traditional techniques. Discrepancies between Definitive corrected data and near real-time Adjusted data obtained using affine transformations are minimal, generally much less than 5 nanoTeslas per vector component, and less than 1 nanoTesla for the total field magnitude, which satisfies International Real-Time Magnetic Observatory Network (INTERMAGNET) standards.

Open-File Report