SEARCH · Geology Reports

Results for “Nuclear Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

USGS2013

NMR measurement of oil shale magnetic relaxation at high magnetic field

Nuclear magnetic resonance (NMR) at low field is used extensively to provide porosity and pore-size distributions in reservoir rocks. For unconventional resources, due to low porosity and permeability of the samples, much of the signal exists at very short T 2 relaxation times. In addition, the organic content of many shales will also produce signal at short relaxation times. Despite recent improvements in low-field technology, limitations still exist that make it difficult to account for all hydrogen-rich constituents in very tight rocks, such as shales. The short pulses and dead times along with stronger gradients available when using high-field NMR equipment provides a more complete measurement of hydrogen-bearing phases due to the ability to probe shorter T 2 relaxation times (<10 -5 sec) than can be examined using low-field equipment. Access to these shorter T 2 times allows for confirmation of partially resolved peaks observed in low-field NMR data that have been attributed to solid organic phases in oil shales. High-field (300 MHz or 7 T) NMR measurements of spin-spin T 2 and spin-lattice T 1 magnetic relaxation of raw and artificially matured oil shales have potential to provide data complementary to low field (2 MHz or 0.05T) measurements. Measurements of high-field T 2 and T 1 -T 2 correlations are presented. These data can be interpreted in terms of organic matter phases and mineral-bound water known to be present in the shale samples, as confirmed by Fourier transform infrared spectroscopy, and show distributions of hydrogen-bearing phases present in the shales that are similar to those observed in low field measurements.

Conference Paper↗

USGS1971

Techniques for assessing water resource potentials in the developing countries: with emphasis on streamflow, erosion and sediment transport, water movement in unsaturated soils, ground water, and remote sensing in hydrologic applications

Hydrologic instrumentation and methodology for assessing water-resource potentials have originated largely in the developed countries of the temperature zone. The developing countries lie largely in the tropic zone, which contains the full gamut of the earth's climatic environments, including most of those of the temperate zone. For this reason, most hydrologic techniques have world-wide applicability. Techniques for assessing water-resource potentials for the high priority goals of economic growth are well established in the developing countries--but much more are well established in the developing countries--but much more so in some than in other. Conventional techniques for measurement and evaluation of basic hydrologic parameters are now well-understood in the developing countries and are generally adequate for their current needs and those of the immediate future. Institutional and economic constraints, however, inhibit growth of sustained programs of hydrologic data collection and application of the data to problems in engineering technology. Computer-based technology, including processing of hydrologic data and mathematical modelling of hydrologic parameters i also well-begun in many developing countries and has much wider potential application. In some developing counties, however, there is a tendency to look on the computer as a panacea for deficiencies in basic hydrologic data collection programs. This fallacy must be discouraged, as the computer is a tool and not a "magic box." There is no real substitute for sound programs of basic data collection. Nuclear and isotopic techniques are being used increasingly in the developed countries in the measurement and evaluation of virtually all hydrologic parameter in which conventional techniques have been used traditionally. Even in the developed countries, however, many hydrologists are not using nuclear techniques, simply because they lack knowledge of the principles involved and of the potential benefits. Nuclear methodology in hydrologic applications is generally more complex than the conventional and hence requires a high level of technical expertise for effective use. Application of nuclear techniques to hydrologic problems in the developing countries is likely to be marginal for some years to come, owing to the higher costs involved and expertise required. Nuclear techniques, however, would seem to have particular promise in studies of water movement in unsaturated soils and of erosion and sedimentation where conventional techniques are inadequate, inefficient and in some cases costly. Remote sensing offers great promise for synoptic evaluations of water resources and hydrologic processes, including the transient phenomena of the hydrologic cycle. Remote sensing is not, however, a panacea for deficiencies in hydrologic data programs in the developing countries. Rather it is a means for extending and augmenting on-the-ground observations ans surveys (ground truth) to evaluated water resources and hydrologic processes on a regionall or even continental scale. With respect to economic growth goals in developing countries, there are few identifiable gaps in existing hydrologic instrumentation and methodology insofar as appraisal, development and management of available water resources are concerned. What is needed is acceleration of institutional development and professional motivation toward more effective use of existing and proven methodology. Moreover, much sophisticated methodology can be applied effectively in the developing countries only when adequate levels of indigenous scientific skills have been reached and supportive institutional frameworks are evolved to viability.

Open-File Report↗

USGS1992

Decomposition techniques

Sample decomposition is a fundamental and integral step in the procedure of geochemical analysis. It is often the limiting factor to sample throughput, especially with the recent application of the fast and modern multi-element measurement instrumentation. The complexity of geological materials makes it necessary to choose the sample decomposition technique that is compatible with the specific objective of the analysis. When selecting a decomposition technique, consideration should be given to the chemical and mineralogical characteristics of the sample, elements to be determined, precision and accuracy requirements, sample throughput, technical capability of personnel, and time constraints. This paper addresses these concerns and discusses the attributes and limitations of many techniques of sample decomposition along with examples of their application to geochemical analysis. The chemical properties of reagents as to their function as decomposition agents are also reviewed. The section on acid dissolution techniques addresses the various inorganic acids that are used individually or in combination in both open and closed systems. Fluxes used in sample fusion are discussed. The promising microwave-oven technology and the emerging field of automation are also examined. A section on applications highlights the use of decomposition techniques for the determination of Au, platinum group elements (PGEs), Hg, U, hydride-forming elements, rare earth elements (REEs), and multi-elements in geological materials. Partial dissolution techniques used for geochemical exploration which have been treated in detail elsewhere are not discussed here; nor are fire-assaying for noble metals and decomposition techniques for X-ray fluorescence or nuclear methods be discussed.

Journal of Geochemical Exploration↗

USGS1979

Investigations needed to stimulate the development of Jordan's mineral resources

The level of living that any society can attain is a direct function of the use it makes of all kinds of raw materials (soil, water, metals, nonmetals, etc.), all kinds of energy (both animate and inanimate), and all kinds of human ingenuity; and is an inverse function of the size of the population that must share the collective product. The relation between raw materials, energy and ingenuity is such that use of a large amount of one may offset the need for large amounts of others. The most vital raw materials are water, soil, and construction materials, for these are needed in large quantities and are hard to import. Metals, chemicals, and inanimate energy are necessary for industrialization. The more of these minerals a nation possess, the better, but not nation can hope to be self-sufficient in all of the m and therefore must trade for some essential materials. Jordan’s natural resources have been little explored. The grantitc-metamorphic terrane in the southeastern part of the Kingdom could contain deposits of tungsten, rare earths, feldspar, mica, fluorite etc. and the sedimentary terrane over much of the rest of the county is favorable for the occurrence of oil. Even if none of these minerals is found, however, Jordan’s other mineral resource, if fully explored and developed in the light of modern technology, will support a far higher level of living than her people now enjoy. Very likely she can increase her rainfall by about 10 percent by cloud seeding, and she undeveloped supplies in both surface and ground water that are sufficient to nearly double her usable water supply. Even if she does not have oil or have it in large quantities, she can buy it cheaply from neighboring counties, and in addition has undeveloped sources of hydroelectric power, large reserves of bituminous limestone, large reserves of nuclear power as uranium in phosphate rock, and can use solar and wind power for special purposes. Her large supplies of construction, fertilizer, and other chemical raw materials will not only satisfy her own needs, but will yield both raw materials and some manufactured products for export. And she has valuable resource of touristic interest in the form of incomparable scenery, antiquities, and holy places, which, if properly advertised, could well become her largest single source of foreign currency. Revenues obtained from this source and from the export of agricultural products, nonmetallic minerals, and mineral products should support foreign oil purchase of oil, machinery, and other products not mined or produced internally. Full development of Jordan’s economic potential will take years to achieve and involves many complex activities. One of the most essential is one that can be pressed in the early years, namely the gathering of facts and basic data concerning the character, extent, and distribution of her resources, and the uses that can be made of them. Without each fundamental data or the understanding of their meaning or the ways to use and apply them, costly developmental projects and similar efforts to raise the level of living are likely to have limited success at best. Basic data and mineral resources are best gathered and published by permanent government agencies, for private organizations and individual cannot afford to take the risks involved in gathering data that may not have an immediate economic return; and even if private parties do collect such data they are not likely to make them general available. Of the activities needed in the field of mineral resources, some are already underway as the established function of government agencies. No bureau however, seems to have responsibility for making geologic maps and for gathering data on such things as steam flow, composition and properties of minerals and rocks, or for investigating the uses to which Jordan’s minerals might be put. To satisfy these needs, a Geological Survey and a Bureau of Mineral Industries should be formed and placed in operation as quickly as possible. The task of collecting and interpreting basic data or mineral resources must be done largely by Jordanians, for only in this way will Jordan acquire the technical competence needed to use the information. Few Jordanians have enough training or experience to work independently in these fields now, however, so help from outside technicians would be necessary over an initial training period of several years. But the number of outside technicians should never exceed the number of Jordanian technicians, and for this reason, neither organization could have a staff of more than a few people during the early years of operation.

Open-File Report↗

USGS2024

Perfluorooctane sulfonamide induced autotoxic effects on the zebrafish immune system

Perfluorooctane sulfonamide (PFOSA) is an immediate perfluorooctanesulfonate (PFOS) precursor (PreFOS). Previous studies have shown PFOSA to induce stronger toxic responses compared to other perfluorinated compounds (PFCs). However, the specific nature of PFOSA-induced toxicity, whether autonomous or mediated by its metabolite PFOS, has not been fully elucidated. This study systematically investigates the immunomodulatory effects of PFOSA and PFOS in zebrafish ( Danio rerio ). Exposure to PFOSA compromised the zebrafish’s ability to defend against pathogenic infections, as evidenced by increased bacterial adhesion to their skin and reduced levels of the biocidal protein lysozyme (LYSO). Moreover, PFOSA exposure was associated with disruptions in inflammatory markers and immune indicators, along with a decrease in immune cell counts. The findings from this study suggest that the immunotoxicity effects of PFOSA are primarily due to its own toxicity rather than its metabolite PFOS. This conclusion was supported by dose-dependent responses, the severity of observed effects, and multivariate analysis. In addition, our experiments using NF-κB-morpholino knock-down techniques further confirmed the role of the Nuclear factor-κappa B pathway in mediating PFOSA-induced immunotoxicity. In conclusion, this study reveals that PFOSA impairs the immune system in zebrafish through an autotoxic mechanism, providing valuable insights for assessing the ecological risks of PFOSA.

Environmental Science and Technology↗

USGS1988

Characterization of humic acid fractions by C-13 nuclear magnetic resonance spectroscopy

Soil humic acids from different environments were fractionated by adsorption chromatography on Sephadex and characterized by C‐13 nuclear magnetic resonance (NMR) spectroscopy. The C‐13 NMR spectra of the fractions consist of some sharp, well‐resolved lines and some broad bands in contrast to the spectra of the unfractionated humic acids, where the bands are broader and less well‐resolved. The marked increase in resolution is apparently due to increased homogeneity of the fractions. These spectra are compared to the spectra of model compounds.

Environmental Technology Letters↗

USGS2013

A small-diameter NMR logging tool for groundwater investigations

A small-diameter nuclear magnetic resonance (NMR) logging tool has been developed and field tested at various sites in the United States and Australia. A novel design approach has produced relatively inexpensive, small-diameter probes that can be run in open or PVC-cased boreholes as small as 2 inches in diameter. The complete system, including surface electronics and various downhole probes, has been successfully tested in small-diameter monitoring wells in a range of hydrogeological settings. A variant of the probe that can be deployed by a direct-push machine has also been developed and tested in the field. The new NMR logging tool provides reliable, direct, and high-resolution information that is of importance for groundwater studies. Specifically, the technology provides direct measurement of total water content (total porosity in the saturated zone or moisture content in the unsaturated zone), and estimates of relative pore-size distribution (bound vs. mobile water content) and hydraulic conductivity. The NMR measurements show good agreement with ancillary data from lithologic logs, geophysical logs, and hydrogeologic measurements, and provide valuable information for groundwater investigations.

Groundwater↗

USGS2002

Strong-acid, carboxyl-group structures in fulvic acid from the Suwannee River, Georgia. 1. Minor structures

An investigation of the strong-acid characteristics (pKa 3.0 or less) of fulvic acid from the Suwannee River, Georgia, was conducted. Quantitative determinations were made for amino acid and sulfur-containing acid structures, oxalate half-ester structures, malonic acid structures, keto acid structures, and aromatic carboxyl-group structures. These determinations were made by using a variety of spectrometric (13C-nuclear magnetic resonance, infrared, and ultraviolet spectrometry) and titrimetric characterizations on fulvic acid or fulvic acid samples that were chemically derivatized to indicate certain functional groups. Only keto acid and aromatic carboxyl-group structures contributed significantly to the strong-acid characteristics of the fulvic acid; these structures accounted for 43% of the strong-acid acidity. The remaining 57% of the strong acids are aliphatic carboxyl groups in unusual and/or complex configurations for which limited model compound data are available.

Environmental Science & Technology↗

USGS2021

Mercury isotope fractionation by internal demethylation and biomineralization reactions in seabirds: Implications for environmental mercury science

A prerequisite for environmental and toxicological applications of mercury (Hg) stable isotopes in wildlife and humans is quantifying the isotopic fractionation of biological reactions. Here, we measured stable Hg isotope values of relevant tissues of giant petrels ( Macronectes spp.). Isotopic data were interpreted with published HR-XANES spectroscopic data that document a stepwise transformation of methylmercury (MeHg) to Hg-tetraselenolate (Hg(Sec) 4 ) and mercury selenide (HgSe) (Sec = selenocysteine). By mathematical inversion of isotopic and spectroscopic data, identical δ 202 Hg values for MeHg (2.69 ± 0.04‰), Hg(Sec) 4 (−1.37 ± 0.06‰), and HgSe (0.18 ± 0.02‰) were determined in 23 tissues of eight birds from the Kerguelen Islands and Adélie Land (Antarctica). Isotopic differences in δ 202 Hg between MeHg and Hg(Sec) 4 (−4.1 ± 0.1‰) reflect mass-dependent fractionation from a kinetic isotope effect due to the MeHg → Hg(Sec) 4 demethylation reaction. Surprisingly, Hg(Sec) 4 and HgSe differed isotopically in δ 202 Hg (+1.6 ± 0.1‰) and mass-independent anomalies (i.e., changes in Δ 199 Hg of ≤0.3‰), consistent with equilibrium isotope effects of mass-dependent and nuclear volume fractionation from Hg(Sec) 4 → HgSe biomineralization. The invariance of species-specific δ 202 Hg values across tissues and individual birds reflects the kinetic lability of Hg-ligand bonds and tissue-specific redistribution of MeHg and inorganic Hg, likely as Hg(Sec) 4 . These observations provide fundamental information necessary to improve the interpretation of stable Hg isotope data and provoke a revisitation of processes governing isotopic fractionation in biota and toxicological risk assessment in wildlife.

Environmental Science and Technology↗

USGS2022

Achievements and prospects of global broadband seismographic networks after 30 years of continuous geophysical observations

Global seismographic networks (GSNs) emerged during the late nineteenth and early twentieth centuries, facilitated by seminal international developments in theory, technology, instrumentation, and data exchange. The mid- to late-twentieth century saw the creation of the World-Wide Standardized Seismographic Network (1961) and International Deployment of Accelerometers (1976), which advanced global geographic coverage as seismometer bandwidth increased greatly allowing for the recording of the Earth's principal seismic spectrum. The modern era of global observations and rapid data access began during the 1980s, and notably included the inception of the GEOSCOPE initiative (1982) and GSN (1988). Through continual improvements, GEOSCOPE and the GSN have realized near-real time recording of ground motion with state-of-art data quality, dynamic range, and timing precision to encompass 180 seismic stations, many in very remote locations. Data from GSNs are increasingly integrated with other geophysical data (e.g., space geodesy, infrasound and Interferometric Synthetic Aperture Radar). Globally distributed seismic data are critical to resolving crust, mantle, and core structure; illuminating features of the plate tectonic and mantle convection system; rapid characterization of earthquakes; identification of potential tsunamis; global nuclear test verification; and provide sensitive proxies for environmental changes. As the global geosciences community continues to advance our understanding of Earth structure and processes controlling elastic wave propagation, GSN infrastructure offers a springboard to realize increasingly multi-instrument geophysical observatories. Here, we review the historical, scientific, and monitoring heritage of GSNs, summarize key discoveries, and discuss future associated opportunities for Earth Science.

Reviews of Geophysics↗

USGS2013

Transcriptome resources for the frogs Lithobates clamitans and Pseudacris regilla , emphasizing antimicrobial peptides and conserved loci for phylogenetics

We developed genetic resources for two North American frogs, Lithobates clamitans and Pseudacris regilla , widespread native amphibians that are potential indicator species of environmental health. For both species, mRNA from multiple tissues was sequenced using 454 technology. De novo assemblies with Mira3 resulted in 50 238 contigs (N50 = 687 bp) and 48 213 contigs (N50 = 686 bp) for L. clamitans and P. regilla , respectively, after clustering with CD-Hit-EST and purging contigs below 200 bp. We performed BLASTX similarity searches against the Xenopus tropicalis proteome and, for predicted ORFs, HMMER similarity searches against the Pfam-A database. Because there is broad interest in amphibian immune factors, we manually annotated putative antimicrobial peptides. To identify conserved regions suitable for amplicon resequencing across a broad taxonomic range, we performed an additional assembly of public short-read transcriptome data derived from two species of the genus Rana and identified reciprocal best TBLASTX matches among all assemblies. Although P. regilla , a hylid frog, is substantially more diverged from the ranid species, we identified 56 genes that were sufficiently conserved to allow nondegenerate primer design with Primer3. In addition to providing a foundation for comparative genomics and quantitative gene expression analysis, our results enable quick development of nuclear sequence-based markers for phylogenetics or population genetics.

Molecular Ecology Resources↗

USGS2020

Gas hydrate saturation estimation from acoustic log data in the 2018 Alaska North Slope Hydrate-01 stratigraphic test well

Completed in December 2018, the Alaska North Slope Hydrate 01 stratigraphic test well provides a wealth of logging-while-drilling (LWD) data for strata to below the base of gas hydrate stability (BGHS). This well is intended to be the first of three wells drilled for a long-term gas hydrate production test to be conducted by the U.S. Department of Energy National Energy Technology Laboratory, the Japan Oil, Gas and Metals National Corporation, and the U.S. Geological Survey (USGS). The Hydrate 01 stratigraphic test well confirmed the presence of gas hydrate in two sand reservoirs within the hydrate stability zone, indicating the suitability of this location for a long-term gas hydrate production test. The USGS, using an effective-medium-theory rock-physics approach, has estimated gas hydrate saturations from compressional (P) and shear (S) wave log data acquired in the Hydrate 01 well. We assume that gas hydrate occurs as pore-filling load-bearing material (i.e., part of the grain matrix). For Unit D, approximately 500 feet above the BGHS, both P-wave and S-wave acoustic logs indicate high gas hydrate saturations with S-wave results slightly lower than those for P-waves. For Unit B, located just above the BGHS, we obtain high gas hydrate saturation estimates from both sonic logs. Our P-wave saturation estimates agree well with results from electrical-resistivity-based estimates, whereas estimates from nuclear magnetic resonance LWD data generally suggest 5 to 10 percent higher saturations; our S-wave results suggest lower saturations. These differences likely indicate complexities in the form of gas hydrate occurrence within the sediment pore space, potentially including differences between hydrate occurrence in Units B and D.

Alaska↗

USGS2003

Geothermal energy: clean power from the Earth's heat

Societies in the 21st century require enormous amounts of energy to drive the machines of commerce and to sustain the lifestyles that many people have come to expect. Today, most of this energy is derived from oil, natural gas, and coal, supplemented by nuclear power. Local exceptions exist, but oil is by far the most common source of energy worldwide. Oil resources, however, are nonrenewable and concentrated in only a few places around the globe, creating uncertainty in long-term supply for many nations. At the time of the Middle East oil embargo of the 1970s, about a third of the United States oil supply was imported, mostly from that region. An interruption in the flow of this import disrupted nearly every citizen’s daily life, as well as the Nation’s economy. In response, the Federal Government launched substantial programs to accelerate development of means to increasingly harness “alternative energies”—primarily biomass, geothermal, solar, and wind. The new emphasis on simultaneously pursuing development of several sources of energy recognized the timeless wisdom found in the proverb of “not putting all eggs in one basket.” This book helps explain the role that geothermal resources can play in helping promote such diversity and in satisfying our Nation’s vast energy needs as we enter a new millennium. For centuries, people have enjoyed the benefits of geothermal energy available at hot springs, but it is only through technological advances made during the 20th century that we can tap this energy source in the subsurface and use it in a variety of ways, including the generation of electricity. Geothermal resources are simply exploitable concentrations of the Earth’s natural heat (thermal energy). The Earth is a bountiful source of thermal energy, continuously producing heat at depth, primarily by the decay of naturally occurring radioactive isotopes—principally of uranium, thorium, and potassium—that occur in small amounts in all rocks. This heat then rises to and through the Earth’s surface, where it escapes into the atmosphere. The amount of heat that flows annually from the Earth into the atmosphere is enormous—equivalent to ten times the annual energy consumption of the United States and more than that needed to power all nations of the world, if it could be fully harnessed. Even if only 1 percent of the thermal energy contained within the uppermost 10 kilometers of our planet could be tapped, this amount would be 500 times that contained in all oil and gas resources of the world. How might we benefit from this vast amount of thermal energy beneath our feet? Where, by what means, and how much of the Earth’s natural heat can be usefully harnessed? These are especially important questions to contemplate, because global population is expected to soon exceed seven billion and many scientists believe that the world’s fossilfuel resources may be substantially depleted within this century. Faced with such prospects, both the public and private sectors are working toward more fully utilizing the Earth’s abundant thermal energy and other alternative energy resources. A skeptic might question the wisdom of devoting much national effort to geothermal energy development, especially because many experts think that geothermal heat can contribute at most about 10 percent to the Nation’s energy supply using current technologies. However, ongoing advances in exploration and heat-extraction technologies are improving our ability to use the resource and may substantially increase the geothermal contribution to the Nation’s energy supply. In an attempt to help national planners and average citizens alike understand the nature and energy potential of geothermal resources, this book (1) describes the distribution and nature of geothermal energy, (2) reviews the common types of geothermal systems that provide useful energy with current technology, (3) considers potential geothermal resources that might someday be tapped with developing technologies, and (4) summarizes the role of earth-science information in assessing and harnessing geothermal resources wherever they occur worldwide. The predecessor to this book (Tapping the Earth’s Natural Heat, U.S. Geological Survey Circular 1125, published in 1994) summarized the situation in the early 1990s. In an effort to support national energy planners, this new circular incorporates more recent advances in geothermal science and technology.

Circular↗

USGS1981

Trace elemental analysis of bituminuos coals using the Heidelberg proton microprobe

Trace elements in coal can occur as components of either the organic constituents (macerals) or the inorganic constituents (minerals). Studies of the concentrations and distribution of the trace elements are vital to understanding the geochemical millieu in which the coal was formed and in evaluating the attempts to recover rare but technologically valuable metals. In addition, information on the trace element concentrations is important in predicting the environmental impact of burning particular coals, as many countries move toward greater utilization of coal reserves for energy production. Traditionally, the optical and the electron microscopes and more recently the electron microprobe have been used in studying the components of coal. The proton-induced X-ray emission (PIXE) microprobe offers a new complementary approach with an order of magnitude or more better minimum detection limit. We present the first measurements with a PIXE microprobe of the trace element concentrations of bituminous coal samples. Elemental analyses of the coal macerals-vitrinite, exinite, and inertinite-are discussed for three coal samples from the Eastern U.S.A., three samples from the Western U.S.A., and one sample from the Peoples Republic of China. ?? 1981.

Nuclear Instruments and Methods↗

USGS2012

Wet deposition of fission-product isotopes to North America from the Fukushima Dai-ichi incident, March 2011

Using the infrastructure of the National Atmospheric Deposition Program (NADP), numerous measurements of radionuclide wet deposition over North America were made for 167 NADP sites before and after the Fukushima Dai-ichi Nuclear Power Station incident of March 12, 2011. For the period from March 8 through April 5, 2011, wet-only precipitation samples were collected by NADP and analyzed for fission-product isotopes within whole-water and filterable solid samples by the United States Geological Survey using gamma spectrometry. Variable amounts of 131 I, 134 Cs, or 137 Cs were measured at approximately 21% of sampled NADP sites distributed widely across the contiguous United States and Alaska. Calculated 1- to 2-week individual radionuclide deposition fluxes ranged from 0.47 to 5100 Becquerels per square meter during the sampling period. Wet deposition activity was small compared to measured activity already present in U.S. soil. NADP networks responded to this complex disaster, and provided scientifically valid measurements that are comparable and complementary to other networks in North America and Europe.

Environmental Science & Technology↗

USGS2020

Molecular identification of water-extractable organic carbon from thermally heated soils: C-13 NMR and accurate mass analyses find benzene and pyridine carboxylic acids

To simulate the effects of wildfire on the combustion process in soils and their potential to leach organic compounds into streams and groundwater, mineral soil samples were heated at temperatures of 150–550 °C. Then, the soils were leached with deionized water, filtered, and analyzed for dissolved organic carbon. The water extract was concentrated by both XAD-8 and XAD-4 resins and analyzed by C-13 nuclear magnetic resonance and liquid chromatography time-of-flight mass spectrometry. Approximately 15–20% of the water-extractable organic carbon was identified as benzene dicarboxylic acids, tricarboxylic acids, and tetracarboxylic acid isomers, commonly called BPCAs. Also identified were isomers of pyridine dicarboxylic acids and tricarboxylic acids (PCAs). The conversion of soil organic carbon to BPCAs occurs at 250 °C and reaches a maximum between 350 and 450 °C. At higher temperatures (>450 °C), the BPCA concentrations decrease, suggesting decarboxylation and conversion to carbon dioxide and water. This is the first report of BPCAs and PCAs in water-extractable organic carbon from thermally altered soil and suggest that these compounds are possible candidates for further water-quality studies in watersheds affected by wildfire. Finally, BPCAs and PCAs could contribute to the black carbon and nitrogen in seawater and are worthy of future investigation.

Environmental Science and Technology↗

USGS2020

An integrated feasibility study of reservoir thermal energy storage in Portland, Oregon, USA

In regions with long cold overcast winters and sunny summers, Deep Direct-Use (DDU) can be coupled with Reservoir Thermal Energy Storage (RTES) technology to take advantage of pre-existing subsurface permeability to save summer heat for later use during cold seasons. Many aquifers worldwide are underlain by permeable regions (reservoirs) containing brackish or saline groundwater that has limited beneficial use due to poor water quality. We investigate the utility of these relatively deep, slow flowing reservoirs for RTES by conducting an integrated feasibility study in the Portland Basin, Oregon, USA, developing methods and obtaining results that can be widely applied to groundwater systems elsewhere. As a case study, we have conducted an economic and social cost-benefit analysis for the Oregon Health and Science University (OHSU), a teaching hospital that is recognized as critical infrastructure in the Portland Metropolitan Area. Our investigation covers key factors that influence feasibility including 1) the geologic framework, 2) heat and fluid flow modeling, 3) capital and maintenance costs, 4) the regulatory framework, and 5) operational risks. By pairing a model of building seasonal heat demand with an integrated model of RTES resource supply, we determine that the most important factors that influence RTES efficacy in the study area are operational schedule, well spacing, the amount of summer heat stored (in our model, a function of solar array size), and longevity of the system. Generally, heat recovery efficiency increases as the reservoir and surrounding rocks warm, making RTES more economical with time. Selecting a base-case scenario, we estimate a levelized cost of heat (LCOH) to compare with other sources of heating available to OHSU and find that it is comparable to unsubsidized solar and nuclear, but more expensive than natural gas. Additional benefits of RTES include energy resiliency in the event that conventional energy supplies are disrupted (e.g., natural disaster) and a reduction in fossil fuel consumption resulting in a smaller carbon footprint. Key risks include reservoir heterogeneity and a possible reduction in permeability through time due to scaling (mineral precipitation). Lastly, a map of thermal energy storage capacity for the Portland Basin yields a total of 87,000 GWh, suggesting tremendous potential for RTES in the Portland Metropolitan Area.

Oregon↗

USGS2018

Toxicity assessment of groundwater contaminated by petroleum hydrocarbons at a well-characterized, aged, crude oil release site

Management of petroleum-impacted waters by monitored natural attenuation requires an understanding of the toxicology of both the original compounds released and the transformation products formed during natural breakdown. Here, we report data from a groundwater plume consisting of a mixture of crude oil compounds and transformation products in an effort to bridge the gap between groundwater quality information and potential biological effects of human exposures. Groundwater samples were characterized for redox processes, concentrations of nonvolatile dissolved organic carbon (NVDOC) and total petroleum hydrocarbons in the diesel range, as well as for activation of human nuclear receptors (hNR) and toxicologically relevant transcriptional pathways. Results show upregulation of several biological pathways, including peroxisome proliferator-activated receptor gamma and alpha, estrogen receptor alpha, and pregnane X receptor (PXR) with higher levels of hNR activity observed in more contaminated samples. Our study of affected groundwater contaminated by a crude-oil release 39 years ago shows these types of waters may have the potential to cause adverse impacts on development, endocrine, and liver functioning in exposed populations. Additionally, positive trends in activation of some of the molecular targets (e.g., PXR) with increasing NVDOC concentrations (including polar transformation products) demonstrate the importance of improving our understanding of the toxicity associated with the unknown transformation products present in hydrocarbon-impacted waters. Our results begin to provide insight into the potential toxicity of petroleum-impacted waters, which is particularly timely given the ubiquitous nature of waters impacted by petroleum contamination not only recently but also in the past and the need to protect drinking-water quality.

Environmental Science & Technology↗