Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Interfaces”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
USGS2018

Simulation of less‐mobile porosity dynamics in contrasting sediment water interface porous media

Considering heterogeneity in porous media pore size and connectivity is essential to predicting reactive solute transport across interfaces. However, exchange with less‐mobile porosity is rarely considered in surface water/groundwater recharge studies. Previous research indicates that a combination of pore‐fluid sampling and geoelectrical measurements can be used to quantify less‐mobile porosity exchange dynamics using the time‐varying relation between fluid and bulk electrical conductivity. For this study, we use macro‐scale (10 s of cm) advection–dispersion solute transport models linked with electrical conduction in COMSOL Multiphysics to explore less‐mobile porosity dynamics in two different types of observed sediment water interface porous media. Modeled sediment textures contrast from strongly layered streambed deposits to poorly sorted lakebed sands and cobbles. During simulated ionic tracer perturbations, a lag between fluid and bulk electrical conductivity, and the resultant hysteresis, is observed for all simulations indicating differential loading of pore spaces with tracer. Less‐mobile exchange parameters are determined graphically from these tracer time series data without the need for inverse numerical model simulation. In both sediment types, effective less‐mobile porosity exchange parameters are variable in response to changes in flow direction and fluid flux. These observed flow‐dependent effects directly impact local less‐mobile residence times and associated contact time for biogeochemical reaction. The simulations indicate that for the sediment textures explored here, less‐mobile porosity exchange is dominated by variable rates of advection through the domain, rather than diffusion of solute, for typical low‐to‐moderate rate (approximately 3–40 cm/day) hyporheic fluid fluxes. Overall, our model‐based results show that less‐mobile porosity may be expected in a range of natural hyporheic sediments and that changes in flowpath orientation and magnitude will impact less‐mobile exchange parameters. These temporal dynamics can be assessed with the geoelectrical experimental tracer method applied at laboratory and field scales.

Hydrological Processes↗
USGS2021

Oxygen-controlled recirculating seepage meter reveals extent of nitrogen transformation in discharging coastal groundwater at the aquifer–estuary interface

Nutrient loads delivered to estuaries via submarine groundwater discharge (SGD) play an important role in the nitrogen (N) budget and eutrophication status. However, accurate and reliable quantification of the chemical flux across the final decimeters and centimeters at the sediment–estuary interface remains a challenge, because there is significant potential for biogeochemical alteration due to contrasting conditions in the coastal aquifer and surface sediment. Here, a novel, oxygen- and light-regulated ultrasonic seepage meter, and a standard seepage meter, were used to measure SGD and calculate N species fluxes across the sediment–estuary interface. Coupling the measurements to an endmember approach based on subsurface N concentrations and an assumption of conservative transport enabled estimation of the extent of transformation occurring in discharging groundwater within the benthic zone. Biogeochemical transformation within reactive estuarine surface sediment was a dominant driver in modifying the N flux carried upward by SGD, and resulted in a similar percentage of N removal (~ 42–52%) as did transformations occurring deeper within the coastal aquifer salinity mixing zone (~ 42–47%). Seasonal shifts in the relative importance of biogeochemical processes including denitrification, nitrification, dissimilatory nitrate reduction, and assimilation altered the composition of the flux to estuarine surface water, which was dominated by ammonium in June and by nitrate in August, despite the endmember-based observation that fixed N in discharging groundwater was strongly dominated by nitrate. This may have important ramifications for the ecology and management of estuaries, since past N loading estimates have generally assumed conservative transport from the nearshore aquifer to estuary.

Limnology and Oceanography↗
USGS2013

Temporal variability of exchange between groundwater and surface water based on high-frequency direct measurements of seepage at the sediment-water interface

Seepage at the sediment-water interface in several lakes, a large river, and an estuary exhibits substantial temporal variability when measured with temporal resolution of 1 min or less. Already substantial seepage rates changed by 7% and 16% in response to relatively small rain events at two lakes in the northeastern USA, but did not change in response to two larger rain events at a lake in Minnesota. However, seepage at that same Minnesota lake changed by 10% each day in response to withdrawals from evapotranspiration. Seepage increased by more than an order of magnitude when a seiche occurred in the Great Salt Lake, Utah. Near the head of a fjord in Puget Sound, Washington, seepage in the intertidal zone varied greatly from −115 to +217 cm d−1 in response to advancing and retreating tides when the time-averaged seepage was upward at +43 cm d−1. At all locations, seepage variability increased by one to several orders of magnitude in response to wind and associated waves. Net seepage remained unchanged by wind unless wind also induced a lake seiche. These examples from sites distributed across a broad geographic region indicate that temporal variability in seepage in response to common hydrological events is much larger than previously realized. At most locations, seepage responded within minutes to changes in surface-water stage and within minutes to hours to groundwater recharge associated with rainfall. Likely implications of this dynamism include effects on water residence time, geochemical transformations, and ecological conditions at and near the sediment-water interface.

Water Resources Research↗
USGS2020

Cross-ecosystem linkages and trace metals at the land-water interface

At low concentrations, trace metals are critical for sustaining life on Earth. However, at high concentrations, they become a global contaminant with particularly strong effects on freshwater communities. These effects can propagate to terrestrial ecosystems in part by altering production and community structure of adult aquatic insect emergence and aquatic insect-mediated metal fluxes to terrestrial insectivores. Here we highlight mechanisms driving effects of trace metals on aquatic organisms in general, aquatic insects specifically, and insectivorous consumers at the land-water interface. Specifically, we focus on how trace metals impact and bioaccumulate in aquatic organisms and communities and how these changes propagate through aquatic food web interactions and insect metamorphosis to alter fluxes of aquatically derived prey and trace metals to terrestrial consumers. Ultimately, trace metals impact food webs at the land-water interface by altering aquatic insect prey composition and availability for aquatic insectivores and by reducing aquatic insect subsidies to terrestrial consumers, and not by increasing exposure to trace metals in prey. Exposure of terrestrial insectivores to trace metals in prey is decoupled from aqueous concentrations due to high rates of metal excretion during insect metamorphosis from aquatic larvae to terrestrial adult. These effects increase reliance of aquatic insectivores on terrestrial insect prey subsidies and/or lead to declines and behavioral changes in terrestrial insectivore populations.

Book chapter↗
USGS1985

Evaluation and use of a diffusion-controlled sampler for determining chemical and dissolved oxygen gradients at the sediment-water interface

Field and laboratory evaluations were made of a simple, inexpensive diffusion-controlled sampler with ports on two sides at each interval which incorporates 0.2-??m polycarbonate membrane to filter samples in situ. Monovalent and divalent ions reached 90% of equilibrium between sampler contents and the external solution within 3 and 6 hours, respectively. Sediment interstitial water chemical gradients to depths of tens of centimeters were obtained within several days after placement. Gradients were consistent with those determined from interstitial water obtained by centrifugation of adjacent sediment. Ten milliliter sample volumes were collected at 1-cm intervals to determine chemical gradients and dissolved oxygen profiles at depth and at the interface between the sediment and water column. The flux of dissolved species, including oxygen, across the sediment-water interface can be assessed more accurately using this sampler than by using data collected from benthic cores. ?? 1985 Dr W. Junk Publishers.

Hydrobiologia↗
USGS2020

Experimental shifts of hydrologic residence time in a sandy urban stream sediment-water interface alter nitrate removal and nitrous oxide fluxes

The sediment–water interfaces (SWI) of streams serve as important biogeochemical hotspots in watersheds and contribute to whole-catchment reactive nitrogen budgets and water-quality conditions. Recently, the SWI has been identified as an important source of nitrous oxide (N 2 O) produced in streams, with SWI residence time among the principal controls on its production. Here, we conducted a series of controlled manipulations of SWI exchange in an urban stream that has high dissolved N 2 O concentrations and where we concurrently evaluated less-mobile porosity dynamics. Our experiments took place within isolated portions of two sediment types: a coarse sandy stream bed resulting from excess road-sand application in the watershed, and a coarse sand mixed with clay and organic particles. In these manipulation experiments we systematically varied SWI vertical-flux rates and residence times to evaluate their effect on the fate of nitrate and production rates of N 2 O. Our experiments demonstrate that the fate and transport of nitrate and N 2 O production are influenced by hydrologic flux rates through SWI sediments and associated residence times. Specifically, we show that manipulations of hydrologic flux systematically shifted the depth of the bulk oxic–anoxic interface in the sediments, and that nitrate removal increased with residence time. Our results also support the emerging hypothesis of a ‘Goldilocks’ timescale for the production of nitrous oxide, when transport and reaction timescales favor incomplete denitrification. Areal N 2 O production rates were up to threefold higher during an intermediate residence-time experiment, compared to shorter or longer residence times. In our companion study we documented that the studied sediments were dominated by a long-residence-time less-mobile porosity domain, which could explain why we observed N 2 O production even in bulk-oxic sediments. Overall, we have experimentally demonstrated that changes to SWI hydrologic residence times and SWI substrate associated with urbanization can change the biogeochemical function of the river corridor.

Massachusetts↗
USGS2021

Would you like to know more? The effect of personalized wildfire risk information and social comparisons on information-seeking behavior in the wildland–urban interface

Private landowners are important actors in landscape-level wildfire risk management. Accordingly, wildfire programs and policy encourage wildland–urban interface homeowners to engage with local organizations to properly mitigate wildfire risk on their parcels. We investigate whether parcel-level wildfire risk assessment data, commonly used to inform community-level planning and resource allocation, can be used to “nudge” homeowners to engage further with a regional wildfire organization. We sent 4564 households in western Colorado a letter that included varying combinations of risk information about their community, their parcels, and their neighbors’ parcels, and we measured follow-up visits to a personalized “Web site”. We find that the effect of providing parcel-specific information depends on baseline conditions: Informing homeowners about their property’s wildfire risk increases information-seeking among homeowners of the highest-risk parcels by about 5 percentage points and reduces information-seeking among homeowners of lower-risk parcels by about 6 percentage points. Parcel-specific information also increases the overall response in the lowest risk communities by more than 10 percentage points. Further, we find evidence of a 6-percentage point increase in response rate associated with receiving a social comparison treatment that signals neighboring properties as being either low or moderate risk on average. These results, especially considered against the 13 percent overall average response rate, offer causal evidence that providing parcel-specific wildfire risk information can influence behavior. As such, we demonstrate the effectiveness of simple outreach in engaging wildland–urban interface homeowners with wildfire risk professionals in ways that leverage existing data.

Natural Hazards↗
USGS1987

Biogeochemical cycling in an organic-rich coastal marine basin. 8. A sulfur isotopic budget balanced by differential diffusion across the sediment-water interface

The sulfur isotopic composition of the sulfur fluxes occurring in the anoxic marine sediments of Cape Lookout Bight, N.C., U.S.A., was determined, and the result of isotopic mass balance was obtained via the differential diffusion model. Seasonal pore water sulfate δ 34 S measurements yielded a calculated sulfate input of 0.6%.. Sulfate transported into the sediments via diffusion appeared to be enriched in the lighter isotope because its concentration gradient was steeper, due to the increase in the measured isotopic composition of sulfate with depth. Similarly, the back diffusion of dissolved sulfide towards the sediment-water interface appeared enriched in the heavier isotope. The isotopic composition of this flux was calculated from measurements of the δ 34 S of dissolved sulfide and was determined to be 15.9%.. The isotopic composition of buried sulfide was determined to be −5.2%. and the detrital sulfur input was estimated to be −6.2%.. An isotope mass balance equation based upon the fluxes at the sediment-water interface successfully predicted the isotopic composition of the buried sulfur flux within 0.5%., thus confirming that isotopes diffuse in response to their individual concentration gradients.

Geochimica et Cosmochimica Acta↗
USGS1994

Fractionation of families of major, minor, and trace metals across the melt-vapor interface in volcanic exhalations

Chemical families of metals fractionate systematically as they pass from a silicate melt across the interface with the vapor phase and on into a cooled volcanic plume. We measured three groups of metals in a small suite of samples collected on filters from the plumes of Kilauea (Hawaii, USA), Etna (Sicily), and Merapi (Java) volcanoes. These were the major, minor, and trace metals of the alkali and alkaline earth families (K, Rb, Cs, Ca, Sr, Ba), a group of ordinarily rare metals (Cd, Cu, In, Pb, Tl) that are related by their chalcophile affinities, and the radon daughter nuclides 210Po, 210Bi, and 210Pb. The measurements show the range and some details of systematic melt-vapor fractionation within and between these groups of metals. In the plumes of all three volcanoes, the alkali metals are much more abundant than the alkaline earth metals. In the Kilauea plume, the alkali metals are at least six times more abundant than the alkaline earth metals, relative to abundances in the melt; at Etna, the factor is at least 300. Fractionations within each family are, commonly, also distinctive; in the Kilauea plume, in addition to the whole alkaline earth family being depleted, the heaviest metals of the family (Sr, Ba) are progressively more depleted than the light metal Ca. In plumes of fumaroles at Merapi, K/Cs ratios were approximately three orders of magnitude smaller than found in other earth materials. This may represent the largest observed enrichment of the "light ion lithophile" (LIL) metals. Changes in metal ratios were seen through the time of eruption in the plumes of Kilauea and Etna. This may reflect degree of degassing of volatiles, with which metals complex, from the magma bodies. At Kilauea, the changes in fractionation were seen over about three years; fractionation within the alkaline earth family increased, and that between the two families decreased, over that time. All of the ordinarily rare chalcophile metals measured are extremely abundant in volcanic plumes, and Cd and Tl are enriched relative to the others. Indium is much more abundant in the plume of the hotspot volcano Kilauea than in the Etna plume (probably non-hotspot in character). It may be a useful indicator of the tapping of deep mantle zones, or could aid in the interpretation of reports of Pt group metals in exhalations from hot spot volcanoes. Indium in old glacial ice strata could help assess magnitude and variability of exhalations from hotspot volcanoes in past time. Strong melt-vapor fractionation of the alkali and alkaline earth metals may only be observed in plumes during quiescent degassing of volcanoes; when large amounts of ash or spatter (undifferentiated lava) enter the plume, its alkali and alkaline earth metal composition may approach that of the melt. Ratios among the chalcophile metals may not be much changed by addition of ash, because their concentrations in melt are so small, and masses of them in any plume may remain dominated by transfer across the melt-vapor interface. Radon daughter nuclides give information about state of volcanic activity at time of sampling. The precisely known origins, ultratrace detectability, decay systematics, and wide variations in volatility of these species provide information about residence times, degassing and travel histories, and identities of melt bodies in volcanic systems. ?? 1994.

Geochimica et Cosmochimica Acta↗
USGS2023

Pressurized upflow reactor system for the bioconversion of coal to methane: Investigation of the coal/sand interface effect

Microbial generation of coal bed methane (CBM) represents a significant source of natural gas on Earth. While biostimulation has been demonstrated in batch cultures, environmental parameters such as overburden pressure and formation water flow need to be tested at the laboratory scale to understand in situ potential. We designed and constructed a high-pressure (HP) flow-through reactor system that simulates in situ conditions of underground coal seams. Two stainless-steel columns contained coal from the Powder River Basin (PRB), USA, or a coal/sand mixture to represent the interface of coal seams with sandstone layers, which are hypothesized to exhibit higher methanogenesis rates in situ . The system was filled with CBM formation water, inoculated with a methanogenic enrichment from PRB coal beds, and stimulated with algal biomass as a nutrient. The reactors were incubated under pressure (5.4 atm) and flow of CBM water (0.01 mL/min), and control batch cultures were incubated at ambient pressure and without flow (± amendment). Dissolved and headspace methane concentrations were analyzed over time by gas chromatography for 75 days. The pressurized reactors exhibited longer latency periods than ambient pressure controls, but methane production did not reach a plateau phase, which might reflect the impact of scale on the inoculum. The coal/sand reactor exhibited higher methane production than the coal-only reactor, a pattern also observed in the corresponding controls, suggesting an interface effect on methanogenesis. This study indicates that the HP flow test system we designed is well suited for the study of methanogenesis and provides a successful demonstration of CBM generation from the PRB in field-relevant laboratory conditions as a precursor to meso‑scale demonstrations.

Cleaner Chemical Engineering↗
USGS2022

The MODFLOW Application Programming Interface for simulationcontrol and software interoperability

The MODFLOW API allows other programs to control MODFLOW and interactively change variables without having to modify the source code. The MODFLOW API is based on the Basic Model Interface (BMI), which is a set of conventions that define how to initialize a simulation, update the model state by advancing in time, and finalize the run. For many existing MODFLOW coupling applications, the information provided to MODFLOW must be updated multiple times in a time step. As this capability to modify variables within a time step is not defined by the BMI, an extension to BMI was developed. This eXtended Model Interface is part of the MODFLOW API and allows such a tight coupling to other models. Examples are included for a variety of use cases, including new flexibility for users to develop custom packages without modifying the MODFLOW source code and coupling MODFLOW with other models and optimization libraries.

Environmental Modelling & Software↗
USGS2009

Anatomy of the western Java plate interface from depth-migrated seismic images

Newly pre-stack depth-migrated seismic images resolve the structural details of the western Java forearc and plate interface. The structural segmentation of the forearc into discrete mechanical domains correlates with distinct deformation styles. Approximately 2/3 of the trench sediment fill is detached and incorporated into frontal prism imbricates, while the floor sequence is underthrust beneath the d??collement. Western Java, however, differs markedly from margins such as Nankai or Barbados, where a uniform, continuous d??collement reflector has been imaged. In our study area, the plate interface reveals a spatially irregular, nonlinear pattern characterized by the morphological relief of subducted seamounts and thicker than average patches of underthrust sediment. The underthrust sediment is associated with a low velocity zone as determined from wide-angle data. Active underplating is not resolved, but likely contributes to the uplift of the large bivergent wedge that constitutes the forearc high. Our profile is located 100 km west of the 2006 Java tsunami earthquake. The heterogeneous d??collement zone regulates the friction behavior of the shallow subduction environment where the earthquake occurred. The alternating pattern of enhanced frictional contact zones associated with oceanic basement relief and weak material patches of underthrust sediment influences seismic coupling and possibly contributed to the heterogeneous slip distribution. Our seismic images resolve a steeply dipping splay fault, which originates at the d??collement and terminates at the sea floor and which potentially contributes to tsunami generation during co-seismic activity. ?? 2009 Elsevier B.V.

Earth and Planetary Science Letters↗
USGS2009

Biogeochemistry at a wetland sediment-alluvial aquifer interface in a landfill leachate plume

The biogeochemistry at the interface between sediments in a seasonally ponded wetland (slough) and an alluvial aquifer contaminated with landfill leachate was investigated to evaluate factors that can effect natural attenuation of landfill leachate contaminants in areas of groundwater/surface-water interaction. The biogeochemistry at the wetland-alluvial aquifer interface differed greatly between dry and wet conditions. During dry conditions (low water table), vertically upward discharge was focused at the center of the slough from the fringe of a landfill-derived ammonium plume in the underlying aquifer, resulting in transport of relatively low concentrations of ammonium to the slough sediments with dilution and dispersion as the primary attenuation mechanism. In contrast, during wet conditions (high water table), leachate-contaminated groundwater discharged upward near the upgradient slough bank, where ammonium concentrations in the aquifer where high. Relatively high concentrations of ammonium and other leachate constituents also were transported laterally through the slough porewater to the downgradient bank in wet conditions. Concentrations of the leachate-associated constituents chloride, ammonium, non-volatile dissolved organic carbon, alkalinity, and ferrous iron more than doubled in the slough porewater on the upgradient bank during wet conditions. Chloride, non-volatile dissolved organic carbon (DOC), and bicarbonate acted conservatively during lateral transport in the aquifer and slough porewater, whereas ammonium and potassium were strongly attenuated. Nitrogen isotope variations in ammonium and the distribution of ammonium compared to other cations indicated that sorption was the primary attenuation mechanism for ammonium during lateral transport in the aquifer and the slough porewater. Ammonium attenuation was less efficient, however, in the slough porewater than in the aquifer and possibly occurred by a different sorption mechanism. A stoichiometrically balanced increase in magnesium concentration with decreasing ammonium and potassium concentrations indicated that cation exchange was the sorption mechanism in the slough porewater. Only a partial mass balance could be determined for cations exchanged for ammonium and potassium in the aquifer, indicating that some irreversible sorption may be occurring. Although wetlands commonly are expected to decrease fluxes of contaminants in riparian environments, enhanced attenuation of the leachate contaminants in the slough sediment porewater compared to the aquifer was not observed in this study. The lack of enhanced attenuation can be attributed to the fact that the anoxic plume, comprised largely of recalcitrant DOC and reduced inorganic constituents, interacted with anoxic slough sediments and porewaters, rather than encountering a change in redox conditions that could cause transformation reactions. Nevertheless, the attenuation processes in the narrow zone of groundwater/surface-water interaction were effective in reducing ammonium concentrations by a factor of about 3 during lateral transport across the slough and by a factor of 2 to 10 before release to the surface water. Slough porewater geochemistry also indicated that the slough could be a source of sulfate in dry conditions, potentially providing a terminal electron acceptor for natural attenuation of organic compounds in the leachate plume.

Journal of Contaminant Hydrology↗
USGS2012

Gas exchange rates across the sediment-water and air-water interfaces in south San Francisco Bay

Radon 222 concentrations in the water and sedimentary columns and radon exchange rates across the sediment-water and air-water interfaces have been measured in a section of south San Francisco Bay. Two independent methods have been used to determine sediment-water exchange rates, and the annual averages of these methods agree within the uncertainty of the determinations, about 20%. The annual average of benthic fluxes from shoal areas is nearly a factor of 2 greater than fluxes from the channel areas. Fluxes from the shoal and channel areas exceed those expected from simple molecular diffusion by factors of 4 and 2, respectively, apparently due to macrofaunal irrigation. Values of the gas transfer coefficient for radon exchange across the air-water interface were determined by constructing a radon mass balance for the water column and by direct measurement using floating chambers. The chamber method appears to yield results which are too high. Transfer coefficients computed using the mass balance method range from 0.4 m/day to 1.8 m/day, with a 6-year average of 1.0 m/day. Gas exchange is linearly dependent upon wind speed over a wind speed range of 3.2–6.4 m/s, but shows no dependence upon current velocity. Gas transfer coefficients predicted from an empirical relationship between gas exchange rates and wind speed observed in lakes and the oceans are within 30% of the coefficients determined from the radon mass balance and are considerably more accurate than coefficients predicted from theoretical gas exchange models.

California↗
USGS2020

Representing the function and sensitivity of coastal interfaces in Earth system models

Along coastal interfaces, components of the Earth system interact to regulate ecosystem functions and Earth’s climate. Between the land and ocean, diverse coastal ecosystem types transform, store, and transport material. A dynamic two-way exchange of energy and matter is driven by hydrological and marine processes such as river and groundwater discharge, tides, waves, and storms. Global models lack representation of coastal processes and related feedbacks on Earth’s climate and ecosystems, impeding their predictions of coastal and global response to change. We recommend leveraging existing monitoring networks and regional models to develop and validate global models that include the coastal interface.

Nature Communications↗
USGS2024

Wildland–urban interface wildfire increases metal contributions to stormwater runoff in Paradise, California

The 2018 Camp Fire was a large late-year (November) wildfire that produced an urban firestorm in the Town of Paradise, California, USA, and destroyed more than 18,000 structures. Runoff from burned wildland areas is known to contain ash, which can transport contaminants including metals into nearby watersheds. However, due to historically infrequent occurrences, the effect of wildland urban interface (WUI) fires, such as the Camp Fire, on surface water quality has not been well-characterized. Therefore, this study investigated the effects of widespread urban burning on surface water quality in major watersheds of the Camp Fire area. Between November 2018 and May 2019, 140 surface water samples were collected, including baseflow and stormflow, from burned and unburned watersheds with varying extent of urban development. Samples were analyzed for total and filter-passing metals, dissolved organic carbon, major anions, and total suspended solids. Ash and debris from the Camp Fire contributed metals to downstream watersheds via runoff throughout the storm season. Increases in concentration up to 200-fold were found for metals Cr, Cu, Ni, Pb, and Zn in burned watersheds compared to pre-fire values. Total concentrations of Al, Cd, Cu, Pb, and Zn exceeded EPA aquatic habitat acute criteria by up to 16-fold for up to five months after the fire. To assess possible transport mechanisms and bioavailability, a subset of 18 samples was analyzed using four filters with nominal pore sizes ranging from 0.22 to 1.2 µm to determine the particulate size distribution of metals. Trace and major metals (Al, Ba, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, and Zn) were found mostly associated with larger grain sizes (>0.45 µm), and some metals (Al, Cr, Fe, and Pb) also included a substantial colloidal phase (0.22 µm to 0.45 µm). This study suggests that fires in the wildland-urban interface increase metal concentrations, mainly through particulate driven transport. The metals with largest increases are likely from anthropogenic disaster materials, though biomass ash contributions are also a major contributor to overall water quality. The increase in metals following WUI burning may have adverse ecological impacts.

California↗
USGS2005

Relationships of elevation, channel slope, and stream width to occurrences of native fishes at the Great Plains-Rocky Mountains interface

Environmental gradients occur with upstream progression from plains to mountains and affect the occurrence of native warmwater fish species, but the relative importance of various environmental gradients are not defined. We assessed the relative influences of elevation, channel slope, and stream width on the occurrences of 15 native warmwater fish species among 152 reaches scattered across the North Platte River drainage of Wyoming at the interface of the Great Plains and Rocky Mountains. Most species were collected in reaches that were lower in elevation, had lower channel slopes, and were wider than the medians of the 152 sampled reaches. Several species occurred over a relatively narrow range of elevation, channel slope, or stream width among the sampled reaches, but the distributions of some species appeared to extend beyond the ranges of the sampled reaches. We identified competing logistic-regression models that accounted for the occurrence of individual species using the information-theoretic approach. Linear logistic-regression models accounted for patterns in the data better than curvilinear models for all species. The highest ranked models included channel slope for seven species, elevation for six species, stream width for one species, and both channel slope and stream width for one species. Our results suggest that different environmental gradients may affect upstream boundaries of different fish species at the interface of the Great Plains and Rocky Mountains in Wyoming.

Journal of Freshwater Ecology↗