Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Evolution and Development”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
USGS2011

An analytical model to predict dune and cliff notching due to wave impact

A model was developed to calculate the evolution of a notch in a dune or cliff due to wave impact. Analytical solutions were derived to the model for schematized conditions regarding forcing and dune/cliff properties. Comparisons were made with laboratory experiments where the time evolution of the notch was measured. Values of the transport coefficients in the analytical solutions were determined by least-square fitting the solutions to the laboratory data. Some of these coefficients could be related to the ratio between parameters describing the forcing and the dune/cliff strength. The evolution of the dune notch displayed a linear behavior at short times, whereas the cliff notch showed a more complex response for cases where a feedback between the notch and a beach formed seaward of the cliff occurred.

Conference Paper↗
USGS1985

Evolution and application of instream flow methodologies to small hydropower developments: an overview of the issues

ethods for evaluating instream flow needs have evolved over the last 30 years resulting in two categories which are defined as “standard-setting” and “incremental”. Standard-setting methodologies refer to those measurement and interpretative techniques designed to generate a flow value(s) which is intended to maintain the fishery at some acceptable level. Incremental methodologies on the other hand are organized and repeatable processes by which: (1) a fishery habitat/streamflow relationship and the hydrology of the stream are transformed into a baseline habitat time series; (2) proposed water management alternatives are quantified and compared with the baseline; and (3) project operating rules are negotiated. A hierarchical approach to small-hydro instream flow analysis is suggested.

Book↗
USGS1989

Holocene sand shoals offshore of the Mississippi River delta plain

Offshore of the Mississippi River delta plain lies a series of Holocene sand shoals marking the position of ancient submerged shorelines associated with younger shelf-phase delta plains. These submerged shorelines represent positions when sea level stood lower than present. Short periods of rapid sea level rise during the Holocene transgression, in combination with subsidence, led to the submergence of these sandy shorelines, which can be recognized at the -33 ft (-10 m) and -66 ft (-20 m) isobaths on the Louisiana continental shelf The -33 ft (-10 m) shoreline trend is represented by Trinity Shoal and Ship Shoal, which are associated with the late Holocene Mississippi River delta plain. Trinity Shoal is derived from the Cypremont-Sale delta complex and is located 12 mi (20 km) offshore of Marsh Island. This shoal is 22 mi (35 km) long, 5 mi (8 km) wide, and 16 - 20 ft (5 - 6 m) thick. The facies relationships indicate that Trinity Shoal is a submerged barrier system in the initial stages of shoreface reworking. To the east is Ship Shoal which is associated with the Maringouin-Teche delta complex. This shoal is located 12 mi (20 km) offshore of the Isles Dernieres and is 31 mi (50 km) long, 5 - 6 mi (8 - 10 km) wide, and 13 - 20 ft (4 - 6 m) thick. The facies relationships indicate that Ship Shoal is a marine sand body derived from shoreface reworking of a submerged barrier island. The -66 ft (-20 m) shoreline trend is represented by the Outer Shoal and St. Bernard Shoals, which are associated with the early Mississippi River delta plain. The Outer Shoal is a low relief sand body, which lies seaward of Ship Shoal immediately west of the Mississippi Canyon. The eastern continuation of the -66 ft (-20 m) shoreline trend is the St. Bernard Shoals, which lie 16 mi (25 km) offshore of the Chandeleur Islands. In contrast to the other shoal systems, the St. Bernard Shoals form a shore-parallel zone of more than seven smaller sand shoals which, in many respects, are similar to a shore-oblique sand-ridge field. Collectively, these sand shoals represent a large potential source of aggregate for shoreline restoration and erosion control as well as possible hard mineral resources. Scientifically, these shoals provide insight into the processes which control coastal evolution and shelf sand development under the condition of relative sea level rise.

Mississippi River↗
USGS2021

The roles of environmental variation and parasite survival in virulence–transmission relationships

Disease outbreaks are a consequence of interactions among the three components of a host–parasite system: the infectious agent, the host and the environment. While virulence and transmission are widely investigated, most studies of parasite life-history trade-offs are conducted with theoretical models or tractable experimental systems where transmission is standardized and the environment controlled. Yet, biotic and abiotic environmental factors can strongly affect disease dynamics, and ultimately, host–parasite coevolution. Here, we review research on how environmental context alters virulence–transmission relationships, focusing on the off-host portion of the parasite life cycle, and how variation in parasite survival affects the evolution of virulence and transmission. We review three inter-related ‘approaches’ that have dominated the study of the evolution of virulence and transmission for different host–parasite systems: (i) evolutionary trade-off theory, (ii) parasite local adaptation and (iii) parasite phylodynamics. These approaches consider the role of the environment in virulence and transmission evolution from different angles, which entail different advantages and potential biases. We suggest improvements to how to investigate virulence–transmission relationships, through conceptual and methodological developments and taking environmental context into consideration. By combining developments in life-history evolution, phylogenetics, adaptive dynamics and comparative genomics, we can improve our understanding of virulence–transmission relationships across a diversity of host–parasite systems that have eluded experimental study of parasite life history.

Royal Society Open Science↗
USGS2008

Infiltration from an impoundment for coal‐bed natural gas, Powder River Basin, Wyoming: Evolution of water and sediment chemistry

Development of coal‐bed natural gas (CBNG) in the Powder River Basin, Wyoming, has increased substantially in recent years. Among environmental concerns associated with this development is the fate of groundwater removed with the gas. A preferred water‐management option is storage in surface impoundments. As of January 2007, permits for more than 4000 impoundments had been issued within Wyoming. A study was conducted on changes in water and sediment chemistry as water from an impoundment infiltrated the subsurface. Sediment cores were collected prior to operation of the impoundment and after its closure and reclamation. Suction lysimeters were used to collect water samples from beneath the impoundment. Large amounts of chloride (12,300 kg) and nitrate (13,500 kg as N), most of which accumulated naturally in the sediments over thousands of years, were released into groundwater by infiltrating water. Nitrate was more readily flushed from the sediments than chloride. If sediments at other impoundment locations contain similar amounts of chloride and nitrate, impoundments already permitted could release over 48 × 10 6 kg of chloride and 52 × 10 6 kg of nitrate into groundwater in the basin. A solute plume with total dissolved solid (TDS) concentrations at times exceeding 100,000 mg/L was created in the subsurface. TDS concentrations in the plume were substantially greater than those in the CBNG water (about 2300 mg/L) and in the ambient shallow groundwater (about 8000 mg/L). Sulfate, sodium, and magnesium are the dominant ions in the plume. The elevated concentrations are attributed to cation‐exchange‐enhanced gypsum dissolution. As gypsum dissolves, calcium goes into solution and is exchanged for sodium and magnesium on clays. Removal of calcium from solution allows further gypsum dissolution.

Water Resources Research↗
USGS2007

Variation in northern bobwhite demography along two temporal scales

Quantification and understanding of demographic variation across intra- and inter-annual temporal scales can benefit from the development of theoretical models of evolution and applied conservation of species. We used long-term survey data for northern bobwhites (Colinus virginianus) collected at the northern and southern extent of its geographic range to develop matrix population models which would allow investigation of intra- and inter-annual patterns in bobwhite population dynamics. We first evaluated intra-annual patterns in the importance of a seasonal demographic rate to asymptotic population growth rate with prospective perturbation analysis (elasticity analysis). We then conducted retrospective analysis (life table response experiments) of inter-annual patterns in the contribution of observed changes in demography to the observed change in population growth rate. Survival in the earliest age class during the nonbreeding season had the greatest potential influence in both the northern and southern populations. Examination of inter-annual variation in demography indicated that variation in nonbreeding season survival in the earliest age class contributed the most to observed changes in population growth rate in the northern population. In contrast, changes in fertility in the earliest age class in the southern population had the greatest influence on changes in population growth rate. Prospective elasticity analyses highlight the similarities in bobwhite demography throughout different parts of its geographic range, while retrospective life table response experiments revealed important patterns in the temporal differences of bobwhite life history at the northern and southern extent of its geographic range. ?? 2007 The Society of Population Ecology and Springer.

Population Ecology↗
USGS2003

The petrographic microscope: Evolution of a mineralogical research instrument

The petrographic microscope, designed to observe and measure the optical properties of minerals as a means of identifying them, has provided a foundation for mineralogical and petrological research for more than 120 years. Much of what is known today in these fields is attributable to this instrument, the development of which paralleled an evolution of fundamental optical theory and its correlation with mineral structure and composition. This instrument and its related accessories have evolved through a range of models and designs, which are in themselves distinctive for their scientific function and elegant construction, and are today prized by collectors of scientific instruments.

Mineralogical Record↗
USGS2018

Pore-types and pore-network evolution in Upper Devonian-Lower Mississippian Woodford and Mississippian Barnett mudstones: Insights from laboratory thermal maturation and organic petrology

Pore-evolution models from immature organic-matter (OM) -rich Barnett (0.42%R o ) and Woodford (0.49%R o ) mudstones were compared with models previously developed from low-maturity OM-lean Boquillas (Eagle Ford-equivalent) mudstones to investigate whether (1) different mineralogy (siliceous vs. calcareous) exerts different catalytic and sorption effects and influences OM-pore origin and evolution; and (2) different types of macerals show different OM pore evolution history. Laboratory gold-tube pyrolysis, scanning electron microscopy (SEM) and thin-section petrography, organic petrography, and geochemical characterization were used to investigate the role of bulk mineralogy, maceral type, and thermal maturation on OM-pore evolution. Results suggest that mineralogy has little impact on OM-pore development and evolution. Macerals, identified using both SEM (platy OM, particulate OM, organic–mineral admixtures, Tasmanites ) and organic petrology (vitrinite, inertinite, amorphous organic matter [AOM]/bituminite, telalginite [ Leiosphaeridia , Tasmanites ]), do affect the origin and evolution of OM pores owing to differences in chemical compositions, generation kinetics, and activation-energy distributions between Tasmanites , matrix bituminite, and other types of macerals. Leiosphaeridia and Tasmanites in Woodford mudstone samples exhibit a delay in onset and a shorter period of petroleum generation and pore development compared to the matrix bituminite in the Barnett and Woodford mudstone samples. Pre-oil solid bitumen was observed to have migrated into initial primary mineral pore networks at the bitumen generation stage in both Barnett and Woodford samples. At higher levels of thermal maturation, the volume of primary mineral pores decreases and the pore volume composed of modified mineral pores and OM pores becomes greater. Pore evolution and pore-type heterogeneity in these mudstones is a function of the initial mineral pore network, types of kerogen and macerals, and generation kinetics of individual macerals upon thermal maturation.

Oklahoma↗
USGS2006

USGS science in Menlo Park -- a science strategy for the U.S. Geological Survey Menlo Park Science Center, 2005-2015

In the spring of 2004, the U.S. Geological Survey (USGS) Menlo Park Center Council commissioned an interdisciplinary working group to develop a forward-looking science strategy for the USGS Menlo Park Science Center in California (hereafter also referred to as "the Center"). The Center has been the flagship research center for the USGS in the western United States for more than 50 years, and the Council recognizes that science priorities must be the primary consideration guiding critical decisions made about the future evolution of the Center. In developing this strategy, the working group consulted widely within the USGS and with external clients and collaborators, so that most stakeholders had an opportunity to influence the science goals and operational objectives. The Science Goals are to: Natural Hazards: Conduct natural-hazard research and assessments critical to effective mitigation planning, short-term forecasting, and event response. Ecosystem Change: Develop a predictive understanding of ecosystem change that advances ecosystem restoration and adaptive management. Natural Resources: Advance the understanding of natural resources in a geologic, hydrologic, economic, environmental, and global context. Modeling Earth System Processes: Increase and improve capabilities for quantitative simulation, prediction, and assessment of Earth system processes. The strategy presents seven key Operational Objectives with specific actions to achieve the scientific goals. These Operational Objectives are to: Provide a hub for technology, laboratories, and library services to support science in the Western Region. Increase advanced computing capabilities and promote sharing of these resources. Enhance the intellectual diversity, vibrancy, and capacity of the work force through improved recruitment and retention. Strengthen client and collaborative relationships in the community at an institutional level. Expand monitoring capability by increasing density, sensitivity, and efficiency and reducing costs of instruments and networks. Encourage a breadth of scientific capabilities in Menlo Park to foster interdisciplinary science. Communicate USGS science to a diverse audience.

Circular↗
USGS2001

Coastal-zone hazard maps and recommendations: Eastern Puerto Rico

A series of coastal zone hazard maps cover the area impacted by Hurricane Hugo (1989) in eastern Puerto Rico. The mapping strategy was to develop a tool for quick visualization of multiple hazards for use by coastal planners, managers, property owners, and potential property owners. The Puerto Rico shoreline is heavily developed in places and also highly compartmentalized in terms of shoreline types, geology, and adjacent shelf conditions. Hazards such as coastal erosion, storm surge, riverine flooding, landsliding, and seismic impact also may be compartmentalized. From a management perspective, resources therefore can be allocated on a compartment-by-compartment basis. Six types of hazards were considered in this investigation: (1) shoreline-setting hazards (long-term coastal problems), (2) marine hazards (short-term impacts of coastal storms), (3) earthquake and slope hazards (ground shaking, landslides, and liquefaction), (4) riverine hazards (historical floods), (5) development hazards (high-density development at risk or lowdensity development in extreme-hazard settings), and (6) engineering hazards (special cases in which shoreline engineering projects such as breakwaters or sand mining have significant detrimental effects on portions of the shoreline). Shoreline segments were ranked as being at extreme, high, moderate, or low risk, depending on the number of hazards present within that segment. These rankings are likely to change, gradually over decades with natural coastal evolution, more rapidly as human development infringes on the coastal zone, or in an instant during a severe storm. The hazard maps provide a basis for hazard mitigation and management recommendations.

Puerto Rico↗
USGS2001

Strontium isotope evolution of pore water and calcite in the Topopah Spring Tuff, Yucca Mountain, Nevada

Yucca Mountain, a ridge of Miocene volcanic rocks in southwest Nevada, is being characterized as a site for a potential high-level radioactive waste repository. One issue of concern for the future performance of the potential repository is the movement of water in and around the potential repository horizon. Past water movement in this unsaturated zone is indicated by fluid inclusions trapped in calcite coatings on fracture footwall surfaces and in some lithophysal cavities. Some of the fluid inclusions have homogenization temperatures above the present-day geotherm (J.F. Whelan, written communication), so determining the ages of the calcite associated with those fluid inclusions is important in understanding the thermal history of the potential repository site. Calcite ages have been constrained by uranium-lead dating of silica polymorphs (opal and chalcedony) that are present in most coatings. The opal and chalcedony ages indicate that deposition of the calcite and opal coatings in the welded part of the Topopah Spring Tuff (TSw hydrogeologic unit) spanned nearly the entire history of the 12.8-million-year-old rock mass at fairly uniform overall long-term rates of deposition (within a factor of five). Constraining the age of a layer of calcite associated with specific fluid inclusions is complicated. Calcite is commonly bladed with complex textural relations, and datable opal or chalcedony may be millions of years older or younger than the calcite layer or may be absent from the coating entirely. Therefore, a more direct method of dating the calcite is presented in this paper by developing a model for strontium evolution in pore water in the TSw as recorded by the strontium coprecipitated with calcium in the calcite. Although the water that precipitated the calcite in fractures and cavities may not have been in local isotopic equilibrium with the pore water, the strontium isotope composition of all water in the TSw is primarily controlled by water-rock interaction in the overlying nonwelded and essentially unfractured Paintbrush Group tuffs (PTn). The method of dating secondary minerals from known strontium evolution rates in rocks cannot be used in this study because it assumes the water that deposited the minerals was in isotopic equilibrium with the rock, which is not the case for the pore water in the TSw. Therefore, the evolution of the strontium isotope composition of the water that deposited the calcite, as recorded by the strontium coprecipitated with calcium in the calcite, was used to develop a model for determining the age of the calcite.

Nevada↗
USGS2015

A random-walk algorithm for modeling lithospheric density and the role of body forces in the evolution of the Midcontinent Rift

This paper develops a Monte Carlo algorithm for extracting three-dimensional lithospheric density models from geophysical data. Empirical scaling relationships between velocity and density create a 3D starting density model, which is then iteratively refined until it reproduces observed gravity and topography. This approach permits deviations from uniform crustal velocity-density scaling, which provide insight into crustal lithology and prevent spurious mapping of crustal anomalies into the mantle. We test this algorithm on the Proterozoic Midcontinent Rift (MCR), north-central U.S. The MCR provides a challenge because it hosts a gravity high overlying low shear-wave velocity crust in a generally flat region. Our initial density estimates are derived from a seismic velocity/crustal thickness model based on joint inversion of surface-wave dispersion and receiver functions. By adjusting these estimates to reproduce gravity and topography, we generate a lithospheric-scale model that reveals dense middle crust and eclogitized lowermost crust within the rift. Mantle lithospheric density beneath the MCR is not anomalous, consistent with geochemical evidence that lithospheric mantle was not the primary source of rift-related magmas and suggesting that extension occurred in response to far-field stress rather than a hot mantle plume. Similarly, the subsequent inversion of normal faults resulted from changing far-field stress that exploited not only warm, recently faulted crust but also a gravitational potential energy low in the MCR. The success of this density modeling algorithm in the face of such apparently contradictory geophysical properties suggests that it may be applicable to a variety of tectonic and geodynamic problems.

Iowa, Kansas, Michigan, Minnesota, Nebraska, Wisco↗
USGS2019

Fault initiation in serpentinite

Serpentinite fault rheology is fundamental to tectonic and earthquake processes, yet links between deformation textures and strength evolution during fault initiation are poorly constrained. Here I present field and petrographic microstructural observations of unsheared and sheared serpentinite that demonstrate a progression of fault development. I compliment observations with a clast size distribution analysis to investigate the evolution of fault rigidity, and a numerical model to query the stress distribution of a clast-in-matrix geometry. Unsheared microstructures reveal well-aligned, elongate serpentine in the matrix and short, randomly-oriented serpentine in clasts. Sheared matrix displays cataclastic textures, discrete brittle surfaces, dissolution bands and ductile textures defined by anastomosing networks of well-aligned, fine-grained serpentine. During fault initiation, matrix serpentine anisotropy promotes slip on basal planes or fiber aggregates, and clast-on-clast interactions drive a high bulk viscosity prone to stick-slip behavior. As deformation progresses clast fracturing is focused at clast tips and smaller clasts are preferentially removed by dissolution-precipitation processes, increasing the relative abundance of matrix. Strain is continually focused in the matrix and as clast content reduces the bulk viscosity drops. This study reveals that viscosity contrasts formed by primary serpentinization textures are a major driver for the development and strength evolution of faults. On a continental-scale, similar processes may govern earthquake distributions, fault growth and segmentation patterns on young, serpentinite-hosted faults.

California↗
USGS2003

Future coral reef habitat marginality: Temporal and spatial effects of climate change in the Pacific basin

Marginal reef habitats are regarded as regions where coral reefs and coral communities reflect the effects of steady-state or long-term average environmental limitations. We used classifications based on this concept with predicted time-variant conditions of future climate to develop a scenario for the evolution of future marginality. Model results based on a conservative scenario of atmospheric CO2 increase were used to examine changes in sea surface temperature and aragonite saturation state over the Pacific Ocean basin until 2069. Results of the projections indicated that essentially all reef locations are likely to become marginal with respect to aragonite saturation state. Significant areas, including some with the highest biodiversity, are expected to experience high-temperature regimes that may be marginal, and additional areas will enter the borderline high temperature range that have experienced significant ENSO-related bleaching in the recent past. The positive effects of warming in areas that are presently marginal in terms of low temperature were limited. Conditions of the late 21st century do not lie outside the ranges in which present-day marginal reef systems occur. Adaptive and acclimative capabilities of organisms and communities will be critical in determining the future of coral reef ecosystems.

Conference Paper↗
USGS2026

Fifteen years of WRTDS for advancing water-quality science: A critical review of methodological developments and global applications

Contamination by nutrients, major ions, and metals poses a major threat to global water sustainability. Understanding how these pollutants vary across time and space requires long-term monitoring and robust statistical approaches. Traditional methods, however, often struggle to account for streamflow variability, seasonality, and nonlinear responses. Introduced in 2010, the Weighted Regressions on Time, Discharge, and Season (WRTDS) method offers a flexible, data-driven framework that generates both observed and flow-normalized estimates of concentration and load. Over the past 15 years, WRTDS has become a state-of-the-art tool for water-quality science and management, with applications spanning a wide range of hydrologic, climatic, and policy contexts─including major watersheds across North America, Europe, Asia, Australia, and the Arctic. In this review of WRTDS, we document the method’s major advancements, examine its expanding geographic and thematic applications, and summarize its relevance to water-quality management programs and policies worldwide. We also discuss its performance relative to other regression and machine-learning approaches. Finally, we identify key priorities for future development to support the continued evolution of WRTDS as a trusted and practical tool for scientists and managers working to protect and sustain water resources.

Environmental Science and Technology↗
USGS2018

What makes a first‐magnitude spring?: Global sensitivity analysis of a speleogenesis model to gain insight into karst network and spring genesis

Often, karstic conduit network geometry is unknown. This lack of knowledge represents a significant limitation when modeling flow and solute transport in karst systems. In this study, we apply Morris Method Global Sensitivity Analysis to a speleogenesis model to identify model input parameters, and combinations thereof, that most significantly influence evolution of karst conduit networks, development of first‐magnitude springs, and resulting flow and solute transport pulse responses. Based on an idealized model of the Silver Springshed in Central Florida USA, results showed that porous matrix hydraulic conductivity and parameters that govern connectivity of vertical and horizontal preferential flow paths (proto‐conduits) are the most influential parameters. In particular, a lower porous matrix conductivity is more likely to produce a first‐order magnitude spring. For the boundary conditions assumed in this application, conduits tend to develop in low topographic regions that drained nearby high regions. Morris ensemble realizations that generated first‐magnitude springs exhibit similar flow and solute transport pulse responses at the spring vent, despite differences in network configuration. However, distributed head fields are highly spatially variable, implying substantial spatial variability among solute flow paths and travel times from the land surface to the spring across realizations.

Water Resources Research↗
USGS1989

Paleohydrologic evolution and geochemical dynamics of cumulative supergene metal enrichment at La Escondida, Atacama Desert, northern Chile

Quantitative limonite mapping within the leached capping of the porphyry copper deposit at La Escondida, Chile, permits reconstruction of the paleohydrologic and chemical evolution of a well-developed supergene ore-forming system. The mineralogy, textures, and relative abundance of supergene limonite minerals (hematite, goethite, and jarosite) are used to reconstruct the former ratio of pyrite to chalcocite and the preoxidation copper grade based on empirical limonite sulfide correlations (after Locke, 1926; Blanchard, 1968; and Loghry, 1972). Estimates of preoxidation copper grades in surface exposures and tops of drill holes at La Escondida are significantly lower than actual copper grades in the underlying enrichment blanket at depth. This apparent inconsistency is explained by a progressive increase in the copper grade of the sulfide enrichment blanket as it descended to its present location in response to a descending water table. This systematic trend of reconstructed grades of supergene-enriched copper sulfide increasing with depth offers the first quantitative proof of cumulative downward enrichment in a supergene profile, as proposed by Locke (1926). The consistent trends of limonite mineralogy and abundance in vertical profiles indicate that water table descent at La Escondida was relatively continuous in space, although not necessarily in time.Evidence for cumulative downward enrichment in vertical profiles through leached capping allows quantitative analysis of chemical mass balance in dynamic supergene systems. Slopes of linear regressions for profiles of reconstructed enriched copper grades vs. depth indicate lateral fluxes into or out of a given vertical profile. This method provides independent verification of conclusions from a previous study of copper mass balance at La Escondida (Brimhall et al., 1985) which showed that lateral fluxes of copper were a significant factor during supergene leaching and enrichment.

Economic Geology↗
USGS2025

Rare earth elements on the Moon

Rare earth elements (REEs) are a scarce but vital resource for our modern economies and lifestyles. Since the late 1990s, China has supplied the vast majority of the world’s refined REEs. Increasing global demand has broadened the search for REE deposits to unconventional places, including the Moon. Although most lunar rocks have very low REE concentrations, Apollo samples showed that one type of lunar rock containing potassium (K), REEs, and phosphorus (P)—known by the acronym KREEP—has high concentrations of REEs. Data from orbiting satellites have identified locations where substantial deposits of KREEP are likely. The viability of mining these deposits depends on the evolution of REE economics, the development of the Earth-Moon infrastructure, and the findings from future lunar mineral exploration missions.

Fact Sheet↗