Geology ReportsSearch

SEARCH · Geology Reports

Results for “Anaerobe”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

Enrichment and isolation of Bacillus beveridgei sp. nov., a facultative anaerobic haloalkaliphile from Mono Lake, California, that respires oxyanions of tellurium, selenium, and arsenic

Mono Lake sediment slurries incubated with lactate and tellurite [Te(IV)] turned progressively black with time because of the precipitation of elemental tellurium [Te(0)]. An enrichment culture was established from these slurries that demonstrated Te(IV)-dependent growth. The enrichment was purified by picking isolated black colonies from lactate/Te(IV) agar plates, followed by repeated streaking and picking. The isolate, strain MLTeJB, grew in aqueous Te(IV)-medium if provided with a small amount of sterile solid phase material (e.g., agar plug; glass beads). Strain MLTeJB grew at high concentrations of Te(IV) (~8 mM) by oxidizing lactate to acetate plus formate, while reducing Te(IV) to Te(0). Other electron acceptors that were found to sustain growth were tellurate, selenate, selenite, arsenate, nitrate, nitrite, fumarate and oxygen. Notably, growth on arsenate, nitrate, nitrite and fumarate did not result in the accumulation of formate, implying that in these cases lactate was oxidized to acetate plus CO 2 . Strain MLTeJB is a low G + C Gram positive motile rod with pH, sodium, and temperature growth optima at 8.5–9.0, 0.5–1.5 M, and 40°C, respectively. The epithet Bacillus beveridgei strain MLTeJB T is proposed.

California

Structure and morphology of magnetite anaerobically-produced by a marine magnetotactic bacterium and a dissimilatory iron-reducing bacterium

Intracellular crystals of magnetite synthesized by cells of the magnetotactic vibroid organism, MV-1, and extracellular crystals of magnetite produced by the non-magnetotactic dissimilatory iron-reducing bacterium strain GS-15, were examined using high-resolution transmission electron microscopy, electron diffraction and 57 Fe Mo¨ssbauer spectroscopy. The magnetotactic bacterium contained a single chain of approximately 10 crystals aligned along the long axis of the cell. The crystals were essentially pure stoichiometric magnetite. When viewed along the crystal long axis the particles had a hexagonal cross-section whereas side-on they appeared as rectangules or truncated rectangles of average dimension, 53 × 35 nm. These findings are explained in terms of a three-dimensional morphology comprising a hexagonal prism of 110 faces which are capped and truncated by 111 end faces. Electron diffraction and lattice imaging studies indicated that the particles were structurally well-defined single crystals. In contrast, magnetite particles produced by the strain, GS-15 were irregular in shape and had smaller mean dimensions (14 nm). Single crystals were imaged but these were not of high structural perfection. These results highlight the influence of intracellular control on the crystallochemical specificity of bacterial magnetites. The characterization of these crystals is important in aiding the identification of biogenic magnetic materials in paleomagnetism and in studies of sediment magnetization.

Earth and Planetary Science Letters

Anaerobes into heavy metal: Dissimilatory metal reduction in anoxic environments

Within the last decade, a novel form of microbial metabolism of major environmental significance has been elucidated. In this process, known as dissimilatory metal reduction, specialized microorganisms, living in anoxic aquatic sediments and ground water, oxidize organic compounds to carbon dioxide with metals serving as the oxidant. Recent studies have demonstrated that this metabolism explains a number of important geochemical phenomena in ancient and modern sedimentary environments, affecting not only the cycling of metals but also the fate of organic matter. Furthermore, this metabolism may have practical application in remediation of environments contaminated with toxic metals and/or organics.

Trends in Ecology and Evolution

Anaerobic biodegradation of perfluorooctane sulfonate (PFOS) and microbial community composition in soil amended with a dechlorinating culture and chlorinated solvents

Perfluorooctane sulfonate (PFOS), one of the most frequently detected per - and polyfluoroalkyl substances (PFAS) occurring in soil, surface water, and groundwater near sites contaminated with aqueous film-forming foam (AFFF), has proven to be recalcitrant to many destructive remedies, including chemical oxidation. We investigated the potential to utilize microbially mediated reduction (bioreduction) to degrade PFOS and other PFAS through addition of a known dehalogenating culture, WBC-2, to soil obtained from an AFFF-contaminated site. A substantial decrease in total mass of PFOS (soil and water) was observed in microcosms amended with WBC-2 and chlorinated volatile organic compound (cVOC) co-contaminants — 46.4 ± 11.0 % removal of PFOS over the 45-day experiment. In contrast, perfluorooctanoate (PFOA) and 6:2 fluorotelomer sulfonate (6:2 FTS) concentrations did not decrease in the same microcosms. The low or non-detectable concentrations of potential metabolites in full PFAS analyses, including after application of the total oxidizable precursor assay, indicated that defluorination occurred to non-fluorinated compounds or ultrashort-chain PFAS. Nevertheless, additional research on the metabolites and degradation pathways is needed. Population abundances of known dehalorespirers did not change with PFOS removal during the experiment, making their association with PFOS removal unclear. An increased abundance of sulfate reducers in the genus Desulfosporosinus (Firmicutes) and Sulfurospirillum (Campilobacterota) was observed with PFOS removal, most likely linked to initiation of biodegradation by desulfonation. These results have important implications for development of in situ bioremediation methods for PFAS and advancing knowledge of natural attenuation processes.

Science of the Total Environment

FeS-coated sand for removal of arsenic(III) under anaerobic conditions in permeable reactive barriers

Iron sulfide (as mackinawite, FeS) has shown considerable promise as a material for the removal of As(III) under anoxic conditions. However, as a nanoparticulate material, synthetic FeS is not suitable for use in conventional permeable reactive barriers (PRBs). This study developed a methodology for coating a natural silica sand to produce a material of an appropriate diameter for a PRB. Aging time, pH, rinse time, and volume ratios were varied, with a maximum coating of 4.0 mg FeS/g sand achieved using a pH 5.5 solution at a 1:4 volume ratio (sand: 2 g/L FeS suspension), three days of aging and no rinsing. Comparing the mass deposited on the sand, which had a natural iron-oxide coating, with and without chemical washing showed that the iron-oxide coating was essential to the formation of a stable FeS coating. Scanning electron microscopy images of the FeS-coated sand showed a patchwise FeS surface coating. X-ray photoelectron spectroscopy showed a partial oxidation of the Fe(II) to Fe(III) during the coating process, and some oxidation of S to polysulfides. Removal of As(III) by FeS-coated sand was 30% of that by nanoparticulate FeS at pH 5 and 7. At pH 9, the relative removal was 400%, perhaps due to the natural oxide coating of the sand or a secondary mineral phase from mackinawite oxidation. Although many studies have investigated the coating of sands with iron oxides, little prior work reports coating with iron sulfides. The results suggest that a suitable PRB material for the removal of As(III) under anoxic conditions can be produced through the deposition of a coating of FeS onto natural silica sand with an iron-oxide coating. Iron sulfide (as mackinawite, FeS) has shown considerable promise as a material for the removal of As(III) under anoxic conditions. However, as a nanoparticulate material, synthetic FeS is not suitable for use in conventional permeable reactive barriers (PRBs). This study developed a methodology for coating a natural silica sand to produce a material of an appropriate diameter for a PRB. Aging time, pH, rinse time, and volume ratios were varied, with a maximum coating of 4.0 mg FeS/g sand achieved using a pH 5.5 solution at a 1:4 volume ratio (sand: 2 g/L FeS suspension), three days of aging and no rinsing. Comparing the mass deposited on the sand, which had a natural iron-oxide coating, with and without chemical washing showed that the iron-oxide coating was essential to the formation of a stable FeS coating. Scanning electron microscopy images of the FeS-coated sand showed a patchwise FeS surface coating. X-ray photoelectron spectroscopy showed a partial oxidation of the Fe(II) to Fe(III) during the coating process, and some oxidation of S to polysulfides. Removal of As(III) by FeS-coated sand was 30% of that by nanoparticulate FeS at pH 5 and 7. At pH 9, the relative removal was 400%, perhaps due to the natural oxide coating of the sand or a secondary mineral phase from mackinawite oxidation. Although many studies have investigated the coating of sands with iron oxides, little prior work reports coating with iron sulfides. The results suggest that a suitable PRB material for the removal of As(III) under anoxic conditions can be produced through the deposition of a coating of FeS onto natural silica sand with an iron-oxide coating.

Water Research

Performance of human fecal anaerobe-associated PCR-based assays in a multi-laboratory method evaluation study

A number of PCR-based methods for detecting human fecal material in environmental waters have been developed over the past decade, but these methods have rarely received independent comparative testing in large multi-laboratory studies. Here, we evaluated ten of these methods (BacH, BacHum-UCD, Bacteroides thetaiotaomicron (BtH), BsteriF1, gyrB, HF183 endpoint, HF183 SYBR, HF183 Taqman®, HumM2, and Methanobrevibacter smithii nifH (Mnif)) using 64 blind samples prepared in one laboratory. The blind samples contained either one or two fecal sources from human, wastewater or non-human sources. The assay results were assessed for presence/absence of the human markers and also quantitatively while varying the following: 1) classification of samples that were detected but not quantifiable (DNQ) as positive or negative; 2) reference fecal sample concentration unit of measure (such as culturable indicator bacteria, wet mass, total DNA, etc); and 3) human fecal source type (stool, sewage or septage). Assay performance using presence/absence metrics was found to depend on the classification of DNQ samples. The assays that performed best quantitatively varied based on the fecal concentration unit of measure and laboratory protocol. All methods were consistently more sensitive to human stools compared to sewage or septage in both the presence/absence and quantitative analysis. Overall, HF183 Taqman® was found to be the most effective marker of human fecal contamination in this California-based study.

Water Research

Sources of sulfate supporting anaerobic metabolism in a contaminated aquifer

Field and laboratory techniques were used to identify the biogeochemical factors affecting sulfate reduction in a shallow, unconsolidated alluvial aquifer contaminated with landfill leachate. Depth profiles of 35 S-sulfate reduction rates in aquifer sediments were positively correlated with the concentration of dissolved sulfate. Manipulation of the sulfate concentration in samples revealed a Michaelis−Menten-like relationship with an apparent K m and V max of approximately 80 and 0.83 μM SO 4 - 2 ·day - 1 , respectively. The concentration of sulfate in the core of the leachate plume was well below 20 μM and coincided with very low reduction rates. Thus, the concentration and availability of this anion could limit in situ sulfate-reducing activity. Three sulfate sources were identified, including iron sulfide oxidation, barite dissolution, and advective flux of sulfate. The relative importance of these sources varied with depth in the alluvium. The relatively high concentration of dissolved sulfate at the water table is attributed to the microbial oxidation of iron sulfides in response to fluctuations of the water table. At intermediate depths, barite dissolves in undersaturated pore water containing relatively high concentrations of dissolved barium (∼100 μM) and low concentrations of sulfate. Dissolution is consistent with the surface texture of detrital barite grains in contact with leachate. Laboratory incubations of unamended and barite-amended aquifer slurries supported the field observation of increasing concentrations of barium in solution when sulfate reached low levels. At a deeper highly permeable interval just above the confining bottom layer of the aquifer, sulfate reduction rates were markedly higher than rates at intermediate depths. Sulfate is supplied to this deeper zone by advection of uncontaminated groundwater beneath the landfill. The measured rates of sulfate reduction in the aquifer also correlated with the abundance of accumulated iron sulfide in this zone. This suggests that the current and past distributions of sulfate-reducing activity are similar and that the supply of sulfate has been sustained at these sites.

Environmental Science & Technology

Mobilization of radionuclides from uranium mill tailings and related waste materials in anaerobic environments

Specific extraction studies in our laboratory have shown that iron and manganese oxide- and alkaline earth sulfate minerals are important hosts of radium in uranium mill tailings. Iron- and sulfate-reducing bacteria may enhance the release of radium (and its analog barium) from uranium mill tailings, oil field pipe scale [a major technologically enhanced naturally occurring radioactive material (TENORM) waste], and jarosite (a common mineral in sulfuric acid processed-tailings). These research findings are reviewed and discussed in the context of nuclear waste forms (such as barium sulfate matrices), radioactive waste management practices, and geochemical environments in the Earth's surficial and shallow subsurface regions.

Journal of Radioanalytical and Nuclear Chemistry

Detection of diazotrophy in the acetylene-fermenting anaerobe Pelobacter sp. strain SFB93

Acetylene (C2H2) is a trace constituent of the present Earth's oxidizing atmosphere, reflecting a mixture of terrestrial and marine emissions from anthropogenic, biomass-burning, and unidentified biogenic sources. Fermentation of acetylene was serendipitously discovered during C2H2 block assays of N2O reductase, and Pelobacter acetylenicus was shown to grow on C2H2 via acetylene hydratase (AH). AH is a W-containing, catabolic, low-redox-potential enzyme that, unlike nitrogenase (N2ase), is specific for acetylene. Acetylene fermentation is a rare metabolic process that is well characterized only in P. acetylenicus DSM3246 and DSM3247 and Pelobacter sp. strain SFB93. To better understand the genetic controls for AH activity, we sequenced the genomes of the three acetylene-fermenting Pelobacter strains. Genome assembly and annotation produced three novel genomes containing gene sequences for AH, with two copies being present in SFB93. In addition, gene sequences for all five compulsory genes for iron-molybdenum N2ase were also present in the three genomes, indicating the cooccurrence of two acetylene transformation pathways. Nitrogen fixation growth assays showed that DSM3426 could ferment acetylene in the absence of ammonium, but no ethylene was produced. However, SFB93 degraded acetylene and, in the absence of ammonium, produced ethylene, indicating an active N2ase. Diazotrophic growth was observed under N2 but not in experimental controls incubated under argon. SFB93 exhibits acetylene fermentation and nitrogen fixation, the only known biochemical mechanisms for acetylene transformation. Our results indicate complex interactions between N2ase and AH and suggest novel evolutionary pathways for these relic enzymes from early Earth to modern days.

Applied and Environmental Microbiology

Metabolism of reduced methylated sulfur compounds in anaerobic sediments and by a pure culture of an estuarine methanogen

Addition of dimethylsulfide (DMS), dimethyldisulfide (DMDS), or methane thiol (MSH) to a diversity of anoxic aquatic sediments (e.g., fresh water, estuarine, alkaline/hypersaline) stimulated methane production. The yield of methane recovered from DMS was often 52 to 63%, although high concentrations of DMS (as well as MSH and DMDS) inhibited methanogenesis in some types of sediments. Production of methane from these reduced methylated sulfur compounds was blocked by 2-bromoethanesulfonic acid. Sulfate did not influence the metabolism of millimolar levels of DMS, DMDS, or MSH added to sediments. However, when DMS was added at ∼2-μM levels as [ 14 C]DMS, metabolism by sediments resulted in a 14 CH 4 / 14 CO 2 ratio of only 0.06. Addition of molybdate increased the ratio to 1.8, while 2-bromoethanesulfonic acid decreased it to 0, but did not block 14 CO 2 production. These results indicate the methanogens and sulfate reducers compete for DMS when it is present at low concentrations; however, at high concentrations, DMS is a “noncompetitive” substrate for methanogens. Metabolism of DMS by sediments resulted in the appearance of MSH as a transient intermediate. A pure culture of an obligately methylotrophic estuarine methanogen was isolated which was capable of growth on DMS. Metabolism of DMS by the culture also resulted in the transient appearance of MSH, but the organism could grow on neither MSH nor DMDS. The culture metabolized [ 14 C]-DMS to yield a 14 CH 4 / 14 CO 2 ratio of ∼2.8. Reduced methylated sulfur compounds represent a new class of substrates for methanogens and may be potential precursors of methane in a variety of aquatic habitats.

California

Alachlor transformation patterns in aquatic field mesocosms under variable oxygen and nutrient conditions

Alachlor is one of the most commonly used herbicides in both Europe and North America. Because of its toxic properties, its fate and attenuation in natural waters is practically important. This paper assesses factors that affect alachlor decay rate in aquatic systems using field-scale experimental units. In particular, we used field mesocosms (11.3 m3 outdoor fiberglass tanks) to examine the affect of oxygen level and other factors on decay rate in water columns. This is one of the first studies ever performed where diverse water column conditions have been successfully simulated using common mesocosm-scale facilities. Four treatments were assessed, including aerobic systems (aerobic); low nutrient, oxygen-stratified systems (stratified-LN); moderate nutrient, oxygen-stratified systems (stratified-HN); and anaerobic systems (anaerobic). The lowest half-lives were observed in the anaerobic units (9.7 days) followed by the aerobic (21 days), stratified-HN (22 days), and stratified-LN (46 days) units. Our results indicate that alachlor is transformed most rapidly under anaerobic conditions, although the ambient phosphorus level also appears to influence decay rate. In this study, two common alachlor breakdown products, ethane sulfonic acid (ESA) and oxanilic acid, were also monitored. Oxanilic acid was produced in greater quantities than ESA under all treatments with the highest levels being produced in the stratified-HN units. In general, our results suggest that previous laboratory data, which indicated that high rates of alachlor decay can occur under oxygen-free methanogenic conditions, is translatable to field-scale applications. Copyright (C) 2000 Elsevier Science Ltd.Alachlor is one of the most commonly used herbicides in both Europe and North America. Because of its toxic properties, its fate and attenuation in natural waters is practically important. This paper assesses factors that affect alachlor decay rate in aquatic systems using field-scale experimental units. In particular, we used field mesocosms (11.3 m3 outdoor fiberglass tanks) to examine the affect of oxygen level and other factors on decay rate in water columns. This is one of the first studies ever performed where diverse water column conditions have been successfully simulated using common mesocosm-scale facilities. Four treatments were assessed, including aerobic systems (aerobic); low nutrient, oxygen-stratified systems (stratified-LN); moderate nutrient, oxygen-stratified systems (stratified-HN); and anaerobic systems (anaerobic). The lowest half-lives were observed in the anaerobic units (9.7 days) followed by the aerobic (21 days), stratified-HN (22 days), and stratified-LN (46 days) units. Our results indicate that alachlor is transformed most rapidly under anaerobic conditions, although the ambient phosphorus level also appears to influence decay rate. In this study, two common alachlor breakdown products, ethane sulfonic acid (ESA) and oxanilic acid, were also monitored. Oxanilic acid was produced in greater quantities than ESA under all treatments with the highest levels being produced in the stratified-HN units. In general, our results suggest that previous laboratory data, which indicated that high rates of alachlor decay can occur under oxygen-free methanogenic conditions, is translatable to field-scale applications.Aquatic field mesocosms were used to examine the influence of DO concentration and the presence of nutrients on alachlor transformation. Four treatments were used: wholly aerobic water columns, thermally and oxygen stratified water columns with low nutrient levels, stratified water columns with moderate nutrient levels, and wholly anaerobic water columns. The anaerobic treatment produced the highest rate of alachlor decay, followed by the aerobic and stratified treatments. The lowest decay rate occurred in the aerobic, low-nutrient stratified units.

Water Research

Natural attenuation of chlorinated volatile organic compounds in a freshwater tidal wetland, Aberdeen Proving Ground, Maryland

Ground-water contaminant plumes that are flowing toward or currently discharging to wetland areas present unique remediation problems because of the hydrologic connections between ground water and surface water and the sensitive habitats in wetlands. Because wetlands typically have a large diversity of microorganisms and redox conditions that could enhance biodegradation, they are ideal environments for natural attenuation of organic contaminants, which is a treatment method that would leave the ecosystem largely undisturbed and be cost effective. During 1992-97, the U.S. Geological Survey investigated the natural attenuation of chlorinated volatile organic compounds (VOC's) in a contaminant plume that discharges from a sand aquifer to a freshwater tidal wetland along the West Branch Canal Creek at Aberdeen Proving Ground, Maryland. Characterization of the hydrogeology and geochemistry along flowpaths in the wetland area and determination of the occurrence and rates of biodegradation and sorption show that natural attenuation could be a feasible remediation method for the contaminant plume that extends along the West Branch Canal Creek. The aquifer, which received contaminants in the past from sources that were located upgradient of the current eastern boundary of the wetland, is about 40 to 45 feet thick in the study area. The overlying wetland sediments consist of two distinct layers that have a combined thickness of about 6 to 12 feet--an upper unit of peat and a lower unit of silty to sandy clay or clayey sand. Head distributions show strong vertical gradients, and flow directions are predominantly upward through the wetland sediments. Tidal fluctuations, however, cause some reversals in ground-water-flow directions and changes in discharge locations, which affect the distribution and transport of contaminants. The average linear velocity of ground water is estimated to be about 2 to 3 feet per year along vertical flow lines in the wetland area, and the total ground-water discharge along a 1-foot-wide strip of the wetland extending from the eastern wetland boundary to the creek is in the range of 0.13 to 0.25 feet squared per day. The major parent contaminants in the aquifer were trichloroethylene (TCE); 1,1,2,2-tetrachloroethane (PCA); carbon tetrachloride (CT); and chloroform (CF). The aquifer was typically aerobic, but ground water in the wetland sediments became increasingly anaerobic along the upward flow direction. Iron-reducing conditions were predominant in the lower wetland sediment unit composed of clayey sand and silt, and methanogenesis was predominant in an upper unit composed of peat. Total concentrations of VOC's and the relative proportions of parent compounds to anaerobic daughter products changed substantially as the contaminants were transported upward through these changing redox environments. Concentrations of the parent compounds TCE and PCA ranged from about 100 to 2,000 micrograms per liter in the aquifer beneath the wetland, whereas concentrations of daughter products were low or undetectable. In contrast, the parent compounds commonly were not detected in ground water in the wetland sediments, but the daughter compounds 1,2- dichloro-ethylene (12DCE), vinyl chloride (VC), 1,1,2-trichloroethane (112TCA), and 1,2-dichloroethane (12DCA) were observed. 12DCE and VC were the dominant daughter products in the wetland sediments, even where PCA was the primary parent contaminant discharging to the wetland. The presence of these daughter products in water in the wetland sediments indicates that TCE and PCA are degraded by reductive dechlorination reactions in the naturally anaerobic wetland sediments. Although production of daughter products was observed, total concentrations of the VOC's decreased upward through the 6- to 12-feet-thick wetland sediments and were less than 5 micrograms per liter near the surface. The daughter products are apparently further degraded by these anaerobic processes to non-chlorinated, non-toxic endproducts, or are removed by other attenuation processes such as aerobic degradation or volatilization. Several sets of anaerobic microcosms, some amended with TCE concentrations of 400 or 990 micrograms per liter (3.0 or 7.5 micromoles per liter) and one amended with PCA concentration of 480 micrograms per liter (2.9 micromoles per liter), were constructed in the laboratory using wetland sediment and ground water from the study area. These microcosm experiments confirmed field observations that 12DCE and VC are the dominant daughter products from anaerobic biodegradation of both TCE and PCA. Production of 112TCA and 12DCA also was observed in the PCA-amended microcosms, but concentrations were lower than those of 12DCE and VC. These results indicate that degradation of PCA occurs through both hydrogenolysis and dichloroelimination pathways under anaerobic conditions. Daughter products were not observed in sterile controls, except for relatively low concentrations of 12DCE in the PCA-amended controls, suggesting that the reactions were predominantly microbially mediated. Parent and daughter concentrations in the microcosms decreased to less than 5 micrograms per liter in less than 34 days under methanogenic conditions, thus showing extremely rapid biodegradation rates in these organic-rich wetland sediments. Maximum potential rate constants for biodegradation of TCE and PCA, which were calculated from the microcosm exper-iments assuming first-order degradation rates, ranged from 0.10 to 0.31 per day under methanogenic conditions, corresponding to half-lives of 2 to 7 days. The rate constant for TCE biodegradation under sulfate-reducing conditions was 0.045 West Branch, Aberdeen Proving Ground, Maryland 3 per day (half-life of 15 days), which is lower than under methanogenic conditions. These estimated rate constants for the wetland sediments are two to three orders of magnitude higher than those reported in the literature for TCE biodegradation in microcosms constructed with sandy aquifer sediments. Aerobic biodegradation rates for cis-12DCE, trans-12DCE, and VC were in the same range as those measured for TCE and PCA under anaerobic conditions in microcosm experiments. Thus, production of these daughter products by anaerobic biodegradation of TCE and PCA could be balanced by their consumption where oxygen is available in the wetland sediment, such as near roots and land surface. In the aerobic microcosm experiments, biodegradation of cis-12DCE, trans-12DCE, and VC occurred only if methane consumption occurred, indicating that methanotrophs were involved in the process. Aerobic biodegradation was fastest for vinyl chloride and slowest for TCE in the microcosm experiments. These results agree with other laboratory and field studies that have shown faster degradation by methane-utilizing cultures when the compounds are less halogenated. Equilibrium sorption isotherms were measured in 24-hour batch tests and used to estimate distribution coefficients ( K d 's) to describe the ratios of sorbed to aqueous concentrations of PCA and the daughter products cis-12DCE, trans-12DCE, and VC. The estimated K d's for PCA, cis-12DCE, trans-12DCE, and VC were about 2.3, 1.8, 2.4, and 1.3 liters per kilogram of sediment, respectively. Sorbed concentrations of PCA, cis-12DCE, and trans-12DCE in the wetland sediments, therefore, would be expected to be about twice the concentration measured in the water, whereas sorbed concentrations of VC would not be much greater than the aqueous concentrations. Coefficients of retardation, which were calculated using the K d 's and an advective flow velocity of about 2 feet per year, indicate that sorption alone would cause the movement of the contaminants in the wetland sediments to be 6 to 10 times slower than the advective ground-water flow. Biodegradation and sorption, therefore, are significant natural attenuation mechanisms for chlorinated hydrocarbons in these wetland sediments. The relatively thin layers of wetland sediments are critical in reducing contaminant concentrations and toxicity of the ground water before it discharges to the wetland surface and the creek, and natural attenuation in the wetland sediments could be an effective remediation method for the ground-water contaminants.

Maryland

Coupled arsenotrophy in a hot spring photosynthetic biofilm at Mono Lake, California

Red-pigmented biofilms grow on rock and cobble surfaces present in anoxic hot springs located on Paoha Island in Mono Lake. The bacterial community was dominated (∼ 85% of 16S rRNA gene clones) by sequences from the photosynthetic Ectothiorhodospira genus. Scraped biofilm materials incubated under anoxic conditions rapidly oxidized As(III) to As(V) in the light via anoxygenic photosynthesis but could also readily reduce As(V) to As(III) in the dark at comparable rates. Back-labeling experiments with 73 As(V) demonstrated that reduction to 73 As(III) also occurred in the light, thereby illustrating the cooccurrence of these two anaerobic processes as an example of closely coupled arsenotrophy. Oxic biofilms also oxidized As(III) to As(V). Biofilms incubated with [ 14 C]acetate oxidized the radiolabel to 14 CO 2 in the light but not the dark, indicating a capacity for photoheterotrophy but not chemoheterotrophy. Anoxic, dark-incubated samples demonstrated As(V) reduction linked to additions of hydrogen or sulfide but not acetate. Chemoautotrophy linked to As(V) as measured by dark fixation of [ 14 C]bicarbonate into cell material was stimulated by either H 2 or HS − . Functional genes for the arsenate respiratory reductase ( arrA ) and arsenic resistance ( arsB ) were detected in sequenced amplicons of extracted DNA, with about half of the arrA sequences closely related (∼98% translated amino acid identity) to those from the family Ectothiorhodospiraceae . Surprisingly, no authentic PCR products for arsenite oxidase ( aoxB ) were obtained, despite observing aerobic arsenite oxidation activity. Collectively, these results demonstrate close linkages of these arsenic redox processes occurring within these biofilms. Oxyanions of the group 15 element arsenic, arsenate [As(V)] and arsenite [As(III)], have been known for millennia to be potent poisons. Despite its well-established toxicity to life, the phenomenon of arsenic resistance was discovered whereby some microorganisms maintain an otherwise “normal” existence in the presence of high concentrations of As(V) or As(III) (17, 29, 31). More recently it has become recognized that certain representatives from the bacterial and archaeal domains can actually exploit the electrochemical potential of the As(V)/As(III) redox couple (+130 mV) to gain energy for growth. This can be achieved either by employing As(III) as an autotrophic electron donor or by using As(V) as a respiratory electron acceptor (18, 21, 34). The latter phenomenon, although most commonly associated with chemoheterotrophy, can also employ inorganic substances like sulfide or H 2 . Indeed, As(V)-respiring anaerobes displaying a capacity for chemoautotrophy with these electron donors have been isolated and described (5, 7, 16). We recently reported that photoautotrophy is supported by As(III) in anoxic biofilms located in hot springs on Paoha Island in Mono Lake, CA (15). This process represented a novel means of As(III) oxidation achieved via anoxygenic photosynthesis occurring in certain photosynthetic bacteria (i.e., Ectothiorhodospira ) and possibly within some cyanobacteria as well (e.g., “ Oscillatoria ”). Whether or not a microbial habitat is overtly oxic or anoxic, or temporally shifts between these two states over a diel cycle, critical energy linkages between aerobes and anaerobes have long been known for the biogeochemical cycles of key elements, such as sulfur, iron, and nitrogen. Most prominently studied is the case of nitrogen, whereby an ecological coupling exists between the processes of nitrification and denitrification (9, 10, 28). The former process provides energy to aerobic nitrifiers, while the latter process consumes the nitrate produced by this reaction, thereby meeting the energy needs of the denitrifiers. For arsenic, the detection of both As(III) oxidation and As(V) reduction in oxic and anoxic incubations of freshly collected periphyton suggested that an analogous coupled process may also occur for this element (12). Similarly, several uncontaminated soils in Japan displayed a capacity for either As(V) reduction or As(III) oxidation upon arsenic oxyanion amendment and whether they were incubated under oxic or anoxic conditions (39). A defined coculture consisting of an aerobic As(III) oxidizer (strain OL1) and an anaerobic As(V) respirer (strain Y5) was shown to function in this fashion under manipulated laboratory conditions of oxygen tension (26). We pursued the phenomenon of coupled arsenic metabolism further by using materials collected from the hot spring biofilms in Mono Lake, but we focused on examination of the cycling of arsenic under anoxic conditions. In this paper we report results obtained by manipulated incubations of red-pigmented biofilms found in the hot springs of Paoha Island. Preliminary community characterizations of these biofilms show that they are dominated by B acteria from the genus Ectothiorhodospira but also harbor an assemblage of Archaea related to the Halobacteriacaea . Incubation results have demonstrated the presence of the following arsenic metabolic activities: respiratory As(V) reduction, photosynthetic anaerobic As(III) oxidation, and aerobic As(III) oxidation, along with the ecophysiological conditions under which they occur. Surprisingly, we were unable to obtain authentic PCR products for arsenite oxidase genes ( aoxB ), despite observing aerobic As(III) oxidation activity. These biofilms serve as a model system for how anaerobic cycling of arsenic can be sustained with oxidation of As(III) by anoxygenic photosynthesis coupled to regeneration of this electron donor via dissimilatory As(V) reduction. The significance that such a light-driven anaerobic ecosystem may have played in the Archean Earth is discussed.

California