SEARCH · Geology Reports

Results for “Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources

USGS2022

Wave-driven hydrodynamic processes over fringing reefs with varying slopes, depths, and roughness: Implications for coastal protection

Wave breaking on the steep fore-reef slopes of shallow fringing reefs is effective at dissipating incident sea-swell waves prior to reaching reef shorelines. However, wave setup and free infragravity waves generated during the sea-swell breaking process are often the largest contributors to wave-driven water levels at the shoreline. Laboratory flume experiments and a multi-layer phase-resolving nonhydrostatic wave-flow model, which includes a canopy model to predict drag forces generated by roughness elements, were used to investigate the wave-driven water levels on fringing reefs. Though the model is capable of three dimensional simulations, consistent with the laboratory study, a two-dimensional vertical mode was used. In contrast to many previous studies, both the laboratory experiment and the numerical model account for the effects of large bottom roughness. The numerical model reproduced the observations of the wave transformation and runup over both smooth and rough reef profiles. The numerical model was then extended to quantify the influence of reef geometry and compared to simulations of plane beaches lacking a reef. For a set offshore forcing condition, the fore-reef slope controlled wave runup on reef fronted beaches, whereas the beach slope controlled wave runup on plane beaches. As a result, the coastal protection utility of reefs is dependent on these slopes. For our examples, with a fore-reef slope of 1/5 and a 500 m prototype reef flat length, a beach slope of ~1/30 marked the transition between the reef providing runup reduction for steeper beach slopes and enhancing wave runup for milder slopes. Roughness coverage, spacing, dimensions, and drag coefficient were investigated with results indicating the greatest runup reductions were due to tall roughness elements on the reef flat.

JGR Oceans↗

USGS2023

Development and application of an Infragravity Wave (InWave) driver to simulate nearshore processes

Infragravity waves are key components of the hydro-sedimentary processes in coastal areas, especially during extreme storms. Accurate modeling of coastal erosion and breaching requires consideration of the effects of infragravity waves. Here, we present InWave, a new infragravity wave driver of the Coupled Ocean-Atmopshere-Waves-Sediment Transport (COAWST) modeling system. InWave computes the spatial and temporal variation of wave energy at the wave group scale and the associated incoming bound infragravity wave. Wave group-varying forces drive free infragravity wave growth and propagation within the hydrodynamic model of the coupled modeling system, which is the Regional Ocean Modeling System (ROMS) in this work. Since ROMS is a three-dimensional model, this coupling allows for the combined formation of undertow currents and infragravity waves. We verified the coupled InWave-ROMS with one idealized test case, one laboratory experiment, and one field experiment. The coupled modeling system correctly reproduced the propagation of gravity wave energy with acceptable numerical dissipation. It also captured the transfer of energy from the gravity band to the infragravity band, and within the different infragravity bands in the surf zone, the measured three-dimensional flow structure, and dune morphological evolution satisfactorily. The idealized case demonstrated that the infragravity wave variance depends on the directional resolution and horizontal grid resolution, which are known challenges with the approach taken here. The addition of InWave to COAWST enables novel investigation of nearshore hydro-sedimentary dynamics driven by infragravity waves using the strengths of the other modeling components, namely the three-dimensional nature of ROMS and the sediment transport routines.

Journal of Advances in Modeling Earth Systems↗

USGS2024

A comprehensive assessment of submarine landslides and mass wasting processes offshore southern California

It is critical to characterize submarine landslide hazards near dense coastal populations, especially in areas with active faults, which can trigger slope failure, subsequent tsunamis, and damage seabed infrastructure during earthquake shaking. Offshore southern California, numerous marine geophysical surveys have been conducted over the past decade, and high-resolution bathymetric and subsurface data now cover about 60 percent of the total region between Point Conception and the United States-Mexico border from the California coast out to the base of Patton Escarpment ∼200 km offshore. In a comprehensive compilation and interpretive mapping effort, we find evidence of seafloor failure throughout offshore southern California with nearly 1,500 submarine landslide-related features, including 63 discrete slide deposits with debris and >1,400 slide-related scarps. In our analysis, we highlight new mapping of submarine landslides in Catalina Basin, the Del Mar slide, the San Gabriel slide complex, and the 232 km 2 San Nicolas slide, the largest area of any known submarine landslide mass offshore southern California. Analysis of the spatial distribution of submarine landslide features suggests that most mapped slide features are located relatively near coastal sediment sources, particularly during sea-level lowstand conditions, which underscores the importance of sediment supply and sediment accumulation on low-gradient slopes as failure preconditioning processes. Tectonically driven uplift at shelf edges and along basin flanks is another key preconditioning factor, and our results also suggest that earthquakes along active faults trigger mass wasting, especially for repeated, small-scale failures on tectonically steepened slopes.

California↗

USGS2024

Controls on the stratigraphic architecture of the US Atlantic margin: Processes forming the accommodation space

Accommodation space governs the spatial and temporal distributions of sediments in continental margins. Mapping the sedimentation patterns, therefore, offers insights into the solid-Earth processes that shape accommodation space. We assembled an unprecedented amount of seismic and borehole data along the Eastern North American Margin and used it to divide the margin's sedimentary package into eight chronostratigraphic intervals, identifying temporal shifts in depocenters under the continental shelf, slope, and rise. The Jurassic depocenters follow the syn-rift structure and its thermal subsidence loci. The Long Island Platform is the only margin segment where the early post-rift sediment thickness matches subsidence predictions from uniform-stretching models, whereas in Georges Bank Basin (GBB) and Baltimore Canyon Trough (BCT), sediment thickness is 1.5–3 times higher than predicted, pointing to other factors at play. A margin-wide Jurassic transient shoulder uplift is inferred from the occurrence of stratigraphic onlaps above thinned crust. Unlike the Jurassic, the Cretaceous and Cenozoic depocenters disregard the inherited subsidence pattern. The accommodation space over the shelf and coastal plain during the Cretaceous was affected by regional isostatic compensation of the sedimentary loads accumulated on the shelf and rise. Accommodation space development in the GBB was interrupted during the Cretaceous after the margin crossed the Great Meteor Hotspot track, resulting in a widespread permanent uplift, erosion, and sediment redistribution. The distribution of anomalous Neogene subsidence in the BCT challenges previous suggestions of mantle dynamic control on the accommodation space and favors flexural downwarping of the shelf by sediment accumulation on the rise.

Journal of Geophysical Research: Solid Earth↗

USGS2024

Computationally efficient emulation of spheroidal elastic deformation sources using machine learning models: a Gaussian-process-based approach

Elastic continuum mechanical models are widely used to compute deformations due to pressure changes in buried cavities, such as magma reservoirs. In general, analytical models are fast but can be inaccurate as they do not correctly satisfy boundary conditions for many geometries, while numerical models are slow and may require specialized expertise and software. To overcome these limitations, we trained supervised machine learning emulators (model surrogates) based on parallel partial Gaussian processes which predict the output of a finite element numerical model with high fidelity but >1,000× greater computational efficiency. The emulators are based on generalized nondimensional forms of governing equations for finite non‐dipping spheroidal cavities in elastic halfspaces. Either cavity volume change or uniform pressure change boundary conditions can be specified, and the models predict both surface displacements and cavity (pore) compressibility. Because of their computational efficiency, using the emulators as numerical model surrogates can greatly accelerate data inversion algorithms such as those employing Bayesian Markov chain Monte Carlo sampling. The emulators also permit a comprehensive evaluation of how displacements and cavity compressibility vary with geometry and material properties, revealing the limitations of analytical models. Our open‐source emulator code can be utilized without finite element software, is suitable for a wide range of cavity geometries and depths, includes an estimate of uncertainties associated with emulation, and can be used to train new emulators for different source geometries.

JGR Machine Learning and Computation↗

USGS2025

Rupture process of the Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake

The Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake ruptured a km long portion of the east-west trending Mendocino fault zone (MFZ). In order to clarify the rupture process, we assemble three-component seismograms from regional seismic stations, horizontal coseismic displacement vectors derived from Global Navigation Satellite System (GNSS) time series, and a Sentinel-1 ascending interferogram. These data are interpreted with a model of slip distributed on two vertical fault planes representative of the eastern MFZ and spanning the ~70 km length of the aftershock zone. Assuming right-lateral strike slip, we find that the rupture initiates in the oceanic mantle at 20-30 km depth and proceeds unilaterally updip and toward the east. Early aftershocks locate adjacent to the peak slip areas, tracking the coseismic rupture propagation from oceanic mantle to shallower depth and implying a significant role of static stress transfer in driving aftershocks in an ocean plate environment.

California↗

USGS2012

Precise U‐Pb ages of Duluth Complex and related mafic intrusions, northeastern Minnesota: Geochronological insights to physical, petrogenetic, paleomagnetic, and tectonomagmatic processes associated with the 1.1 Ga Midcontinent Rift System

Precise resolution of the timing of igneous activity is crucial to understanding the dynamic processes associated with continental rifting. Mafic intrusive rocks constitute a major portion of the exposed 1100 Ma (Keweenawan) Midcontinent Rift system in northeastern Minnesota; however, prior to this study, geochronological data were insufficient to allow rigorous interpretation of intrusive histories and their relationships to extrusive suites. Eight anorthositic and gabbroic intrusives were chosen to represent both the temporal and spatial ranges of plutonic activity that formed the Duluth Complex and related mafic intrusions. U‐Pb isotopic analyses from zircons and baddeleyites result in U‐Pb concordant ages with little or no ambiguity introduced by inherited components, Pb loss or common Pb. The earliest Keweenawan plutonism exposed in Minnesota occurs along the northeastern flank of the Duluth Complex as a series of layered gabbros (Nathan's layered series) emplaced at 1106.9 ± 0.6 Ma. This sequence of gabbro sheets shares temporal, spatial, and compositional similarities with the nearby Logan sills in Ontario. Four Duluth Complex anorthositic and troctolitic series samples from widely separated areas have unresolvable ages between 1099.3 ± 0.3 and 1098.6 ± 0.5 Ma, indicating a very short duration for peak intrusive activity (0.5–1 m.y.). The unresolvable ages between anorthositic and troctolitic plutons suggest that these two magma series are more closely related than previously modeled and argue strongly for the need to reexamine their fundamental petrogenetic relationships. These dates also imply that the major reverse‐to‐normal magnetic polarity switch, used throughout the rift system as an important correlation tool, occurred prior to 1099 Ma. This date is several million years earlier than previously suspected and emphasizes the need for further paleomagnetic and geochronological data from the overlying volcanics. Much of the hypabyssal intrusive suite within the volcanic pile overlying Duluth Complex plutons may be significantly younger than the main pulse of plutonic activity. Two hypabyssal bodies, the Sonju Lake intrusion and gabbro at Silver Bay, were emplaced at 1096.1 ± 0.8 Ma and 1095.8 ± 1.2 Ma, respectively. Dates reported here and in previous studies support the concept of episodic tectonomagmatic rift development where magmatism was apparently concentrated in episodes of short duration (<1–3 m.y.) interspersed with longer hiatuses (2–8 m.y.).

Michigan, Minnesota, Ontario, Wisconsin↗

USGS2012

Fluid expulsion sites on the Cascadia accretionary prism: mapping diagenetic deposits with processed GLORIA imagery

Point-discharge fluid expulsion on accretionary prisms is commonly indicated by diagenetic deposition of calcium carbonate cements and gas hydrates in near-surface (<10 m below seafloor; mbsf) hemipelagic sediment. The contrasting clastic and diagenetic lithologies should be apparent in side scan images. However, sonar also responds to variations in bottom slope, so unprocessed images mix topographic and lithologic information. We have processed GLORIA imagery from the Oregon continental margin to remove topographic effects. A synthetic side scan image was created initially from Sea Beam bathymetric data and then was subtracted iteratively from the original GLORIA data until topographic features disappeared. The residual image contains high-amplitude backscattering that we attribute to diagenetic deposits associated with fluid discharge, based on submersible mapping, Ocean Drilling Program drilling, and collected samples. Diagenetic deposits are concentrated (1) near an out-of-sequence thrust fault on the second ridge landward of the base of the continental slope, (2) along zones characterized by deep-seated strikeslip faults that cut transversely across the margin, and (3) in undeformed Cascadia Basin deposits which overlie incipient thrust faults seaward of the toe of the prism. There is no evidence of diagenetic deposition associated with the frontal thrust that rises from the dècollement. If the dècollement is an important aquifer, apparently the fluids are passed either to the strike-slip faults which intersect the dècollement or to the incipient faults in Cascadia Basin for expulsion. Diagenetic deposits seaward of the prism toe probably consist dominantly of gas hydrates.

Cascadia Basin↗

USGS2011

High-energy nearshore processes

The problem of shoreline erosion has become a matter of much interest in the recent press. To some extent this interest has been driven by the slow rise in sea level that has lent an air of inevitabilty to matters. However, the discussions certainly become more focused by the approach of a major storm or hurricane: for instance, the 1985 scare associated with Hurricane Gloria. In fact, it is these major events that dominate the episodic erosion history of an area, and so it is on the basis of knowledge of these events that decisions are made on the development and management of our shorelines. Unfortunately, both our understanding of the fundamental processes and the extent to which our knowledge is transmitted to coastal planners is less than we might hope.

Eos, Transactions, American Geophysical Union↗

USGS2010

The chemical evolution of a travertine-depositing stream: Geochemical processes and mass transfer reactions

This field study focuses on quantitatively defining the chemical changes occurring in Falling Spring Creek, a travertine-depositing stream located in Alleghany County, Virginia. The processes of CO 2 outgassing and calcite precipitation or dissolution control the chemical evolution of the stream. The observed chemical composition of the water was used with the computerized geochemical model WATEQF to calculate aqueous speciation, saturation indices, and CO 2 partial pressure values. Mass balance calculations were performed to obtain mass transfers of CO 2 and calcite. Reaction times, estimated from stream discharge, were used with the mass transfer results to calculate rates of CO 2 , outgassing and calcite precipitation between consecutive sampling points. The stream, which is fed by a carbonate spring, is supersaturated with respect to CO 2 along the entire 5.2-km flow path. Outgassing of CO 2 drives the solution to high degrees of supersaturation with respect to calcite. Metabolic uptake of CO 2 by photosynthetic plants is insignificant, because the high supply rate of dissolved carbon dioxide and the extreme agitation of the stream at waterfalls and rapids causes a much greater amount of inorganic CO 2 outgassing to occur. Calcite precipitation is kinetically inhibited until near the crest of a 20-m vertical waterfall. Calcite precipitation rates then reach a maximum at the waterfall where greater water turbulence allows the most rapid escape of CO 2 . Physical evidence for calcite precipitation exists in the travertine deposits which are first observed immediately above the waterfall and extend for at least 1.0 km below the falls. Net calcite precipitation occurs at all times of the year but is greatest during low-flow conditions in the summer and early fall.

Water Resources Research↗

USGS2005

Aeolian processes at the Mars Exploration Rover Meridiani Planum landing site

The martian surface is a natural laboratory for testing our understanding of the physics of aeolian (wind-related) processes in an environment different from that of Earth. Martian surface markings and atmospheric opacity are time-variable, indicating that fine particles at the surface are mobilized regularly by wind. Regolith (unconsolidated surface material) at the Mars Exploration Rover Opportunity's landing site has been affected greatly by wind, which has created and reoriented bedforms, sorted grains, and eroded bedrock. Aeolian features here preserve a unique record of changing wind direction and wind strength. Here we present an in situ examination of a martian bright wind streak, which provides evidence consistent with a previously proposed formational model for such features. We also show that a widely used criterion for distinguishing between aeolian saltation- and suspension-dominated grain behaviour is different on Mars, and that estimated wind friction speeds between 2 and 3 m s-1, most recently from the northwest, are associated with recent global dust storms, providing ground truth for climate model predictions.

Nature↗

USGS2014

Precise determination of δ 88 Sr in rocks, minerals, and waters by double-spike TIMS: A powerful tool in the study of chemical, geologic, hydrologic and biologic processes

We present strontium isotopic ( 88 Sr/ 86 Sr and 87 Sr/ 86 Sr) results obtained by 87 Sr– 84 Sr double spike thermal ionization mass-spectrometry (DS-TIMS) for several standards as well as natural water samples and mineral samples of abiogenic and biogenic origin. The detailed data reduction algorithm and a user-friendly Sr-specific stand-alone computer program used for the spike calibration and the data reduction are also presented. Accuracy and precision of our δ 88 Sr measurements, calculated as permil (‰) deviations from the NIST SRM-987 standard, were evaluated by analyzing the NASS-6 seawater standard, which yielded δ 88 Sr = 0.378 ± 0.009‰. The first DS-TIMS data for the NIST SRM-607 potassium feldspar standard and for several US Geological Survey carbonate, phosphate, and silicate standards (EN-1, MAPS-4, MAPS-5, G-3, BCR-2, and BHVO-2) are also reported. Data obtained during this work for Sr-bearing solids and natural waters show a range of δ 88 Sr values of about 2.4‰, the widest observed so far in terrestrial materials. This range is easily resolvable analytically because the demonstrated external error (±SD, standard deviation) for measured δ 88 Sr values is typically ≤0.02‰. It is shown that the “true” 87 Sr/ 86 Sr value obtained by the DS-TIMS or any other external normalization method combines radiogenic and mass-dependent mass-fractionation effects, which cannot be separated. Therefore, the “true” 87 Sr/ 86 Sr and the δ 87 Sr parameter derived from it are not useful isotope tracers. Data presented in this paper for a wide range of naturally occurring sample types demonstrate the potential of the δ 88 Sr isotope tracer in combination with the traditional radiogenic 87 Sr/ 86 Sr tracer for studying a variety of biological, hydrological, and geological processes.

Journal of Analytical Atomic Spectrometry↗

USGS2002

Plumes, or plate tectonic processes?

Hotspots – large volcanic provinces – such as Iceland, Hawaii and Yellowstone, are almost universally assumed to come from plumes of hot mantle rising from deep within the Earth. At Iceland, perhaps the best-studied hotspot on Earth, this hypothesis is inconsistent with many first-order observations, such as the lack of high temperatures, a volcanic track or a seismic anomaly in the lower mantle. The great melt production there is explained better by enhanced fertility in the mantle where the mid-Atlantic spreading ridge crosses the Caledonian suture zone. The thick crust built by the excessive melt production encourages complex, unstable, leaky microplate tectonics, which provides positive feedback by enhancing volcanism further. Such a model explains Iceland as a natural consequence of relatively shallow processes related to plate tectonics, and accounts for all the first- and second-order geophysical, geological and geochemical observations at Iceland without special pleading or invoking coincidences.

Astronomy and Geophysics↗

USGS2012

Process-based coastal erosion modeling for Drew Point (North Slope, Alaska)

A predictive, coastal erosion/shoreline change model has been developed for a small coastal segment near Drew Point, Beaufort Sea, Alaska. This coastal setting has experienced a dramatic increase in erosion since the early 2000’s. The bluffs at this site are 3-4 m tall and consist of ice-wedge bounded blocks of fine-grained sediments cemented by ice-rich permafrost and capped with a thin organic layer. The bluffs are typically fronted by a narrow ( &sim; 5 m wide) beach or none at all. During a storm surge, the sea contacts the base of the bluff and a niche is formed through thermal and mechanical erosion. The niche grows both vertically and laterally and eventually undermines the bluff, leading to block failure or collapse. The fallen block is then eroded both thermally and mechanically by waves and currents, which must occur before a new niche forming episode may begin. The erosion model explicitly accounts for and integrates a number of these processes including: (1) storm surge generation resulting from wind and atmospheric forcing, (2) erosional niche growth resulting from wave-induced turbulent heat transfer and sediment transport (using the Kobayashi niche erosion model), and (3) thermal and mechanical erosion of the fallen block. The model was calibrated with historic shoreline change data for one time period (1979-2002), and validated with a later time period (2002-2007).

Alaska↗

USGS2007

Survey of geographical information system and image processing software

The Global Resource Information Database—a part of the United Nations Environment Programme—conducts a bi-annual survey of geographical information system (GIS) and image processing (IP) software. This survey makes information about software products available in developing countries. The 1993 survey showed that the number of installations of GIS, IP, and related software products increased dramatically from 1991 to 1993, mostly in North America and Europe.

International Journal of Remote Sensing↗

USGS2017

A hidden-process model for estimating prespawn mortality using carcass survey data

After returning to spawning areas, adult Pacific salmon Oncorhynchus spp. often die without spawning successfully, which is commonly referred to as prespawn mortality. Prespawn mortality reduces reproductive success and can thereby hamper conservation, restoration, and reintroduction efforts. The primary source of information used to estimate prespawn mortality is collected through carcass surveys, but estimation can be difficult with these data due to imperfect detection and carcasses with unknown spawning status. To facilitate unbiased estimation of prespawn mortality and associated uncertainty, we developed a hidden-process mark–recovery model to estimate prespawn mortality rates from carcass survey data while accounting for imperfect detection and unknown spawning success. We then used the model to estimate prespawn mortality and identify potential associated factors for 3,352 adult spring Chinook Salmon O. tshawytscha that were transported above Foster Dam on the South Santiam River (Willamette River basin, Oregon) from 2009 to 2013. Estimated prespawn mortality was relatively low (≤13%) in most years (interannual mean = 28%) but was especially high (74%) in 2013. Variation in prespawn mortality estimates among outplanted groups of fish within each year was also very high, and some of this variation was explained by a trend toward lower prespawn mortality among fish that were outplanted later in the year. Numerous efforts are being made to monitor and, when possible, minimize prespawn mortality in salmon populations; this model can be used to provide unbiased estimates of spawning success that account for unknown fate and imperfect detection, which are common to carcass survey data.

Oregon↗

USGS2011

Biogeochemical processes on tree islands in the greater everglades: Initiating a new paradigm

Scientists’ understanding of the role of tree islands in the Everglades has evolved from a plant community of minor biogeochemical importance to a plant community recognized as the driving force for localized phosphorus accumulation within the landscape. Results from this review suggest that tree transpiration, nutrient infiltration from the soil surface, and groundwater flow create a soil zone of confluence where nutrients and salts accumulate under the head of a tree island during dry periods. Results also suggest accumulated salts and nutrients are flushed downstream by regional water flows during wet periods. That trees modulate their environment to create biogeochemical hot spots and strong nutrient gradients is a significant ecological paradigm shift in the understanding of the biogeochemical processes in the Everglades. In terms of island sustainability, this new paradigm suggests the need for distinct dry-wet cycles as well as a hydrologic regime that supports tree survival. Restoration of historic tree islands needs further investigation but the creation of functional tree islands is promising.

Florida↗

USGS2021

River terrace evidence of tectonic processes in the eastern North American plate interior, South Anna River, Virginia

We show that long-recognized seismicity in the central Virginia seismic zone of the eastern North American intraplate setting arises primarily from tectonic processes predicted by new, fully coupled plate tectonic geodynamic models. The study leverages much new geophysical and geologic data following the 2011 Mineral, Virginia, earthquake that ruptured a steeply dipping, northwest-verging reverse fault traversed by the South Anna River. The data are primarily assembled from a flight of six fluvial terrace geomorphic markers identified and correlated on texture, relative weathering, and numeric ages including one terrestrial cosmogenic nuclide (TCN) profile and 30 luminescence dates. Terrace thickness, stratigraphic age models, and incision rates downstream and upstream of the 2011 rupture are different. Long-term river incision rates of ∼25–30 m/My are superimposed on regional TCN-determined erosion rates of ∼8.5 m/My; however, there are at least 10 m of tectonically driven incision in the epicentral region at rates of ∼30–94 m/My. The inferred deformation resembles a hanging wall anticline above a blind reverse fault with a diffuse overlying carapace of minor brittle faults, an interpretation supported by seismology as well as bedrock and saprolite mapped across the epicentral region. These results are further supported by channel metrics that show nonuniform channel steepness ( k sn ) and a predicted steady-state channel elevation different from the actual channel elevation across the epicentral region. If all of the observed deformation is a consequence of the fault that ruptured in 2011, the recurrence interval of Mineral-sized events would be ∼5.5 ky.

Virginia↗