Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Marine Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources

EAARL Coastal Topography-Fire Island National Seashore, New York, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗

EAARL coastal topography and imagery–Western Louisiana, post-Hurricane Rita, 2005: First surface

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, Virginia. This project provides highly detailed and accurate datasets of a portion of the Louisiana coastline beachface, acquired post-Hurricane Rita on September 27-28 and October 2, 2005. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the National Aeronautics and Space Administration (NASA) Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Website.

Louisiana↗

EAARL Coastal Topography and Imagery-Assateague Island National Seashore, Maryland and Virginia, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Assateague Island National Seashore in Maryland and Virginia, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar(EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗

Resource manager information needs regarding hydrologic regime shifts for the North Pacific Landscape Conservation

Landscape Conservation Cooperatives (LCCs) are a network of 22 public-private partnerships, defined by ecoregion, that share and provide science to ensure the sustainability of land, water, wildlife, and cultural resources in North America. LCCs were established by the U.S. Department of the Interior (DOI) in recognition of the fact that response to climate change must be coordinated on a landscape-level basis because important resources, ecosystem processes, and resource management challenges extend beyond most of the boundaries considered in current natural resource management. The North Pacific LCC (NPLCC) covers the range of the Pacific coastal temperate rainforest, including an area of 528,360 km 2 spanning 22 degrees of latitude from the Kenai Peninsula, Alaska, to Bodega Bay, California. The coverage area includes parts of four States, two Canadian provinces, and more than 100 Tribes and First Nation language groups. It extends from alpine areas at the crest of coastal mountains across subalpine, montane, and lowland forests to the nearshore marine environment. This wide range of latitudes and elevation zones; terrestrial, freshwater, and marine habitats; and complex jurisdictional boundaries hosts a diversity of natural resources and their corresponding management issues are equally diverse. As evidenced by the Science and Traditional Ecological Knowledge (S-TEK) Strategy guiding principles, identifying and responding to the needs of resource managers is key to the success of the NPLCC. To help achieve this goal of the NPLCC, the U.S. Geological Survey (USGS) has organized several workshops with resource managers and resource scientists to identify management information needs relevant to the priority topics identified in the S-TEK Strategy. Here, we detail the results from a first workshop to address the effects of changes in hydrologic regime on rivers, streams, and riparian corridors. The workshop focused on a subset of the full NPLCC geography and was structured to answer the following questions: What are the valued resources and services that may be affected by hydrologic regime changes in the region? What are the management goals for those resources? How is climate change anticipated to affect valued resources and goals? What adaptation strategies may managers use in response to anticipated changes in resources due to climate-related hydrologic change? What information is needed to inform and use management responses?

Open-File Report↗

EAARL Coastal Topography-Sandy Hook Unit, Gateway National Recreation Area, New Jersey, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Sandy Hook Unit of Gateway National Recreation Area in New Jersey, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗

Stratigraphic cross sections of the Niobrara interval of the Cody Shale and associated rocks in the Wind River Basin, central Wyoming

The Wind River Basin in Wyoming is one of many structural and sedimentary basins that formed in the Rocky Mountain foreland during the Laramide orogeny. The basin is nearly 200 miles long, 70 miles wide, and encompasses about 7,400 square miles in central Wyoming. The basin is bounded by the Washakie Range, Owl Creek uplift, and southern Bighorn Mountains on the north, the Casper arch on the east, the Granite Mountains on the south, and Wind River Range on the west. Many important conventional oil and gas fields producing from reservoirs ranging in age from Mississippian through Tertiary have been discovered in this basin. In addition, an extensive unconventional overpressured basin-centered gas accumulation has been identified in Cretaceous and Tertiary strata in the deeper parts of the basin. It has long been suggested that various Upper Cretaceous marine shales, including the Cody Shale, are the principal hydrocarbon source rocks for many of these accumulations. With recent advances and success in horizontal drilling and multistage fracture stimulation, there has been an increase in exploration and completion of wells in these marine shales in other Rocky Mountain Laramide basins that were traditionally thought of only as hydrocarbon source rocks. The two stratigraphic cross sections presented in this report were constructed as part of a project carried out by the U.S. Geological Survey to characterize and evaluate the undiscovered continuous (unconventional) oil and gas resources of the Niobrara interval of the Upper Cretaceous Cody Shale in the Wind River Basin in central Wyoming. The primary purpose of the cross sections is to show the stratigraphic relationship of the Niobrara equivalent strata and associated rocks in the lower part of the Cody Shale in the Wind River Basin. These two cross sections were constructed using borehole geophysical logs from 37 wells drilled for oil and gas exploration and production, and one surface section along East Sheep Creek near Shotgun Butte in the northwestern part of the basin. Both lines originate at the East Sheep Creek surface section and end near Clarkson Hill in the extreme southeastern part of the basin. The stratigraphic interval extends from the upper part of the Frontier Formation to the middle part of the Cody Shale. The datum is the base of the “chalk kick” marker bed, a distinctive resistivity peak or zone in the lower part of the Cody Shale. A gamma ray and (or) spontaneous potential (SP) log was used in combination with a resistivity log to identify and correlate units. Marine molluscan index fossils collected from nearby outcrop sections were projected into the subsurface to help determine the relative ages of the strata and aid in correlation.

Wyoming↗

Geologic Map of the Eastern Three-Quarters of the Cuyama 30' x 60' Quadrangle, California

The map area encompasses a large part of the western Transverse Ranges and southern Coast Ranges of southern California. The San Andreas fault (SAF) cuts the northern part of the map. The area south of the SAF, about 80 percent of the map area, encompasses several distinct tectonic blocks bounded by major thrust or reverse faults, including the Santa Ynez fault, Big Pine fault (and structurally continuous Pine Mountain fault), Tule Creek fault, Nacimiento fault, Ozena fault, Munson Creek fault, Morales fault, and Frazier Mountain Thrust System. Movement on these faults is as old as Miocene and some faults may still be active. In addition, the Paleocene Sawmill Mountain Thrust south of the SAF and the Pastoria Thrust north of the SAF place Cretaceous and older crystalline rocks above Pelona Schist (south of the SAF) and Rand Schist (north of the SAF). South of the SAF, each tectonic block contains a unique stratigraphy, reflecting either large-scale movement on bounding faults or different depositional environments within each block. On Mount Pinos and Frazier Mountain, intrusive and metamorphic rocks as old as Mesoproterozoic, but including voluminous Cretaceous granitoid rocks, underlie or are thrust above non-marine sedimentary rocks as old as Miocene. Elsewhere, marine and non-marine sedimentary rocks are as old as Cretaceous, dominated by thick sequences of both Eocene and Cretaceous marine shales and sandstones. Middle Miocene to early Oligocene volcanic rocks crop out in the Caliente Hills (part of Caliente Formation) and south of Mount Pinos (part of the Plush Ranch Formation). Fault-bounded windows of Jurassic Franciscan Complex ophiolitic rocks are evident in the southwest corner of the area. North of the SAF, marine and non-marine sedimentary rocks as old as Eocene and Miocene volcanic rocks overlie a crystalline basement complex. Basement rocks include Cretaceous intrusive rocks that range from monzogranite to diorite, and Jurassic to late Paleozoic intrusive and metamorphic rocks. The Jurassic to late Paleozoic intrusive rocks include diorite, gabbro, and ultramafic rocks, and the metasedimentary rocks include marble, quartzite, schist, and gneiss.

Scientific Investigations Map↗

Surface-geophysical characterization of ground-water systems of the Caloosahatchee River basin, southern Florida

The Caloosahatchee River Basin, located in southwestern Florida, includes about 1,200 square miles of land. The Caloosahatchee River receives water from Lake Okeechobee, runoff from the watershed, and seepage from the underlying ground-water systems; the river loses water through drainage to the Gulf of Mexico and withdrawals for public-water supply and agricultural and natural needs. Water-use demands in the Caloosahatchee River Basin have increased dramatically, and the Caloosahatchee could be further stressed if river water is used to accommodate restoration of the Everglades. Water managers and planners need to know how much water will be used within the river basin and how much water is contributed by Lake Okeechobee, runoff, and ground water. In this study, marine seismic-reflection and ground-penetrating radar techniques were used as a means to evaluate the potential for flow between the river and ground-water systems. Seven test coreholes were drilled to calibrate lithostratigraphic units, their stratal geometries, and estimated hydraulic conductivities to surface-geophysical profiles. A continuous marine seismic-reflection survey was conducted over the entire length of the Caloosahatchee River and extending into San Carlos Bay. Lithostratigraphic units that intersect the river bottom and their characteristic stratal geometries were identified. Results show that subhorizontal reflections assigned to the Tamiami Formation intersect the river bottom between Moore Haven and about 9 miles westward. Oblique and sigmoidal progradational reflections assigned to the upper Peace River Formation probably crop out at the floor of the river in the Ortona area between the western side of Lake Hicpochee and La Belle. These reflections image a regional-scale progradational deltaic depositional system containing quartz sands with low to moderate estimated hydraulic conductivities. In an approximate 6-mile length of the river between La Belle and Franklin Lock, deeper karstic collapse structures are postulated. These structures influence the geometries of parallel reflections that intersect the river channel. Here, reflections assigned to the Buckingham Limestone Member of the Tamiami Formation (a confining unit) and reflections assigned to the clastic zone of the sandstone aquifer likely crop out at the river bottom. Beneath these shallow reflections, relatively higher amplitude parallel reflections of the carbonate zone of the sandstone aquifer are well displayed in the seismic-reflection profiles. In San Carlos Bay, oblique progradational reflections assigned to the upper Peace River Formation are shown beneath the bay. Almost everywhere beneath the river, a diffuse ground-water flow system is in contact with the channel bottom. Ground-penetrating radar profiles of an area about 2 miles north of the depositional axis of the deltaic depositional system in the Ortona area show that progradational clinoforms imaged on seismic reflection profiles in the Caloosahatchee River are present within about 17 feet of the ground surface. Ground-penetrating radar profiles show southward dipping, oblique progradational reflections assigned to the upper Peace River Formation that are terminated at their tops by a toplapping or erosional discontinuity. These clinoformal reflections image clean quartz sand that is probably characterized by moderate hydraulic conductivity. This sand could be mapped using ground-penetrating radar methods.

Water-Resources Investigations Report↗

Geology and concepts of genesis of important types of uranium deposits

Uranium ore deposits occur in nearly every major rock type in the earth’s crust, and nearly all igneous, metamorphic, and sedimentary processes are capable of concentrating or dispersing uranium. However, only three types of deposits account for more than 70 percent of known Western World Reasonably Assured Resources (WWRAR): Precambrian quartz-pebble conglomerate type, Proterozoic unconformity type, and Phanerozoic sandstone type. Igneous-related processes in plutonic, volcanic, and magmatic-hydrothermal environments, considered important 25 years ago, now account for less than 10 percent of world resources known at present. The oldest known ore deposits were formed in conglomerates by placer processes under unique anoxic conditions. For the last 2.2 b.y., since oxygenation of the atmosphere, the genesis of both high- and low-temperature deposits has been dominated by three general geochemical processes: (1) oxidation of uranium to soluble U(VI) species permitting aqueous transport, perhaps most commonly as uranyl-carbonate complexes; (2) reduction, principally by C, S −2 , or Fe +2 species, to U(IV) to allow precipitation of uraninite (pitchblende), and coffinite, although the specific reductant commonly cannot be determined because these three tend to be associated geologically; and (3) igneous and metamorphic differentiation caused by exclusion of uranium from crystal structure of most rock-forming minerals. The geochemistry of uranium ore-forming processes has changed in time because of the evolution of life forms and their impact on the earth’s oxygen and carbon budgets. This evolution is reflected in changing predominance of ore types in geologic time: (1) pre-2.8 b.y. ago—no known uranium ore deposits; (2) ca. 2.8 to 2.2 b.y. ago—the first intràcratonic basins and anoxic atmosphere permitted accumulation of placer deposits of uraninite in quartz-pebble conglomerates; these deposits contain about 19 percent of the western world’s resources; (3) ca. 2.2 to 0.4 b.y. ago—following oxygenation of the atmosphere uranium was oxidized and transported as soluble U(VI) complexes to sites of reduction, commonly in organic carbon-rich marginal marine environments. Diagenesis, metamorphism, and near-surface redox enrichment subsequently formed unconformity-type, ultrametamorphic-type, and vein-type ore deposits which together contain more than 25 percent of the western world’s resources; (4) ca. 0.4 b.y. ago to present—after development of land plants the most important ore-forming process was redox-controlled deposition from ground water in continental sediments. Sandstone-type deposits, characteristic of this stage, contain about 40 percent of the western world’s resources.

Book chapter↗

EAARL Coastal Topography-Mississippi and Alabama Barrier Islands, Post-Hurricane Gustav, 2008

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the Mississippi and Alabama barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 8, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗

Sandstone units of the Lee Formation and related strata in eastern Kentucky

Most of the Cumberland Plateau region of southeastern Kentucky is underlain by thick sequences of quartzose sandstone which are assigned for the most part to the Lee Formation. Much new information has been gathered about the Lee and related strata as a result of the cooperative mapping program of the U. S. Geological Survey and the Kentucky Geological Survey between 1960 and 1978. This report summarizes the age, lithology, distribution, sedimentary structures, and stratigraphic relations of the sandstone units of the Lee within and between each of three major outcrop belts in Kentucky: Cumberland Mountain, Pine Mountain, and the Pottsville Escarpment area. The Lee Formation generally has been regarded as Early Pennsylvanian in age and separated from Mississippian strata in Kentucky by an unconformity. However, lithostratigraphic units included in the formation as presently defined are broadly time-transgressive and range in age from Late Mississippian in parts of the Cumberland Mountain outcrop belt to Middle Pennsylvanian in the Pottsville Escarpment area. Members of the Lee intertongue with and grade into the underlying Pennington Formation and overlying Breathitt Formation. Sandstone and conglomeratic sandstone members of the Lee of Mississippian age found only in parts of the Cumberland overthrust sheet are closely associated with marine rocks; Pennsylvanian members are mostly associated with continental coal-bearing strata. Sandstone members of the Lee are mostly quartz rich and range from more than 90 percent to more than 99 percent quartz. They are relatively coarse grained, commonly pebbly, and in places conglomeratic. The units are southwest-trending linear or broadly lobate bodies. The Lee Formation is as much as 1,500 ft thick in the type area in Cumberland Mountain where it has been divided into eight members. The Pinnacle Overlook, Chadwell, White Rocks Sandstone, Middlesboro, Bee Rock Sandstone, and Naese Sandstone Members are mostly quartzose sandstone and conglomerate. The Dark Ridge and Hensley Members are mostly shale, siltstone, thin-bedded silty sandstone, and coal. The lower three of these members, the Pinnacle Overlook, Chadwell, and White Rocks Sandstone, are assigned to the Upper Mississippian Series because they intertongue with marine reddish or greenish shale and siltstone of the Pennington Formation or equivalent strata that contain a Late Mississippian fauna. The overlying quartzose sandstone members of the Lee commonly have coalified plant remains and impressions of plants and are Early to Middle Pennsylvanian in age; they are generally associated with terrestrial shale and siltstone containing coal beds and pinch out eastward into subgraywacke, siltstone, and shale. Although marine members commonly are bimodal, resultant transport directions for both marine and terrestrial members are southwesterly as determined by crossbedding. Thickness variations of the Middlesboro Member in the Cumberland overthrust sheet suggest that it represents tills of at least three major southwesterly trending paleovalleys. Thickness variations of the Bee Rock Sandstone Member east of Rocky Face fault and the combined Bee Rock and Naese Sandstone Members west of Rocky Face fault suggest that these members represent tills of at least two major southwesterly trending paleovalleys. East of Rocky Face fault, the Bee Rock is generally the uppermost member of the Lee; west of the fault, the overlying Naese is at the top. The Naese may range in age from Early to Middle Pennsylvanian and is partly or wholly equivalent to the Rockcastle Sandstone member of the Lee Formation in the area of the Pottsville Escarpment. The Mississippian-Pennsylvanian systemic boundary in the area of the Cumberland overthrust sheet in most places has been placed at an unconformity at the base of the Middlesboro Member; locally it is projected at the base of shales of the underlying Dark Ridge Member or equivalent strata in the Penningto

Professional Paper↗

Effects of kelp forest removal on associated fish assemblages in central California

Visual surveys along subtidal belt transects were used to compare fish assemblages on an experimental and a control site before and after the removal of a canopy-forming kelp forest. The giant kelp Macrocystis pyrifera (L.) C.A. Agardh was removed at the holdfast from ≈ 1 ha of high relief structurally complex rock substratum. The abundance of seven species of fish, of which five were considered midwater species, significantly declined after the kelp was removed. No increases in abundance were noted within the experimental site. On the control site, two declines in abundance were observed, while two species increased in abundance. These results indicate that the presence of a giant kelp forest may increase the abundance and species diversity of the fish assemblages over a high relief rocky reef in central California, U.S.A.

Journal of Experimental Marine Biology and Ecology↗

History of the Redwall Limestone of northern Arizona

Throughout most of northern Arizona the Redwall Limestone of Mississippian age is readily divisible into four lithologic units, designated in ascending order as the Whitmore Wash, Thunder Springs, Mooney Falls, and Horseshoe Mesa Members. The first and third members are thick-bedded to massive carbonate rock. The Horseshoe Mesa Member is relatively thin-bedded limestone, and the Thunder Springs Member is distinctive because it consists of chert beds alternating with thin beds of carbonate rock. Trends in thickness of the various members indicate that the sediment that formed the Redwall was deposited on an even, gently sloping shelf that extended westward from the Defiance positive element, a low landmass located near the present eastern border of northern Arizona. The Peach Springs and Payson ridges projected west and southwest, respectively, from the positive element. These ridges, which were partly submerged and partly above sea level during Mississippian time, are indicated by the patterns of isopach lines and, in part, by the distribution of faunas. The ridges divided the Arizona section of the shelf into three segments: the northern-most, which slopes northwest toward the Cordilleran geosyncline, and the other two, which slope toward the south and southwest. Two transgressions and two regressions of the western and southern seaways are believed to be represented by the Redwall. The first transgression, which is recorded by thick beds of clastic sediment of the Whitmore Wash Member, was less extensive than the second, which is recorded by massive beds of the Mooney Falls Member, for on the western margins of the Defiance positive element the Mooney Falls Member overlaps the two lower members. Furthermore, south of Grand Canyon the Whitmore Wash and Thunder Springs Members lap against the Payson ridge without covering it, whereas the Mooney Falls Member, although relatively thin, extends across it. Regression is believed to be represented by thin beds of the Thunder Springs and Horseshoe Mesa Members, which are interpreted to be the result of low base level caused by silting up with clastic material and consequent retreat of the sea. Cycles in sedimentation are well developed in some parts of the Redwall, especially in the upper two members in which differences in grain size represent five major cycles recognized throughout the extent of the Grand Canyon. These textural differences, ranging from aphanitic to coarse grained, are considered to be not measures of the amount of transportation, as with terrigenous sediments, but reflections of the degree of turbulence or the lack of turbulence during deposition. They are interpreted as indicators of cyclic fluctuations in environment, probably related to changes in wave base. Several clearly defined facies within the Redwall indicate environments of deposition. The clastic limestone that forms a major part of the formation, especially in the offshore areas to the west and south, is believed to represent normal marine conditions where circulation was good and turbulence moderate to strong. Uniform finely crystalline dolomite probably developed through early diagenetic processes on the sea floor. On the basis of its distribution pattern the dolomite seems to have formed under shoal conditions, especially where it borders the shore of the Defiance positive element and along Peach Springs ridge. Oölitic limestone at the top of both major transgressive units is interpreted as reflecting the oscillatory conditions of sea level that provided wave and current agitation at times of maximum sea advance in shoal areas bordering the ridges. Aphanitic limestone, representing accumulations of lime mud, seems to be developed best in the uppermost, or Horseshoe Mesa, member, where, as the seas regressed, nearshore waters may have been isolated and certainly were very calm. Original textures and some structures are preserved in most limestones of the Redwall, and they give much evidence concerning oceanographic factors of the time. Generalizations have been developed concerning the character of the bottom, degrees of energy represented, depth, salinity, and other factors for various parts of the formation. Although these factors differed greatly with time and space, the general conclusions reached are that (1) depths were very shallow to moderate, (2) the sea floor was composed nearly entirely of lime mud and lime sand, which contained no terrigeneous material but with great crinoidal accumulations locally, (3) turbulence ranged from considerable to none, and (4) the sea was clear and warm and nowhere contained saline concentrations sufficient to form evaporites. Chert forming thin irregular beds, locally lenticular and nodular, occurs at two prinicpal positions in the stratigraphic section, and in each it alternates with thin beds of carbonate rock. Chert is prominent throughout the Thunder Springs Member and forms thin but definite zones near the top of the Mooney Falls Member. This chert is believed to have formed on the sea floor during early diagenesis, as evidenced by petrography, paleogeography, and faunal relations. Regional differences in the abundance and type of associated fossils, recorded on a series of 4-foot-square sample plots made throughout the Grand Canyon, suggest a probable relation between fossil distribution and genesis of the chert. The fauna of the Redwall is abundant and varied, but preservation in many places is poor, and numerous specimens can be collected only locally. The most common fossils are brachiopods, corals, foraminifers, and crinoids, but blastoids, gastropods, cephalopods, and pelecypods are not rare. Bryozoans are abundant in the chert of the Thunder Springs Member but uncommon elsewhere. Other organisms locally distributed but not common are algae, trilobites, fish, holothurians, and ostracodes. These groups have been studied by specialists and are the subject of Chapters V through XIII. Certain of the faunal groups, notably the corals and foraminifers, show some degree of vertical zoning and so have furnished important data on age and correlation. Among the corals, the zones of Dorlodotia inconstans and Michelinia expansa are especially significant because of their persistence from section to section across broad areas. The foraminiferal zones are broader and less sharply defined, but they represent a series of major changes in species from bottom to top of the formation. Age determination made on the basis of foraminifers and brachiopods indicate that the base of the Redwall is progressively younger as it passes from areas that were offshore eastward or northward toward the Defiance positive element; the top of the Redwall, in contrast, is shown to be progressively younger away from the positive element. Thus basal beds of Kinderhook age are recognized at Grand Wash, Quartermaster, and Meriwitica Canyons to the northwest, but the lowest strata are of Osage age at Bridge Canyon, Grandview, and other sections closer to the landmass. Likewise, units with fossils of middle Meramec age occur in western Grand Canyon, but, except in the one place discussed in the following paragraph, topmost beds farther east in Grand Canyon are of Osage age. South of Grand Canyon the youngest member of the Redwall (Horseshoe Mesa) has been removed by pre-Supai Formation erosion. Rocks still younger than the Horseshoe Mesa once may have covered the entire region, possibly representing a third sequence of transgression and regression. At Bright Angel trail in eastern Grand Canyon, for example, a unique unit at the top of the Redwall section contains fossils of Chester age and apparently represents a remnant of Late Mississippian rocks that survived as an inlier there.

Arizona↗

Reconnaissance engineering geology of the Haines area, Alaska, with emphasis on evaluation of earthquake and other geologic hazards

The Alaska earthquake of March 27, 1964, brought into sharp focus the need for engineering geologic studies in urban areas. Study of the Haines area constitutes an integral part of an overall program to evaluate earthquake and other geologic hazards in most of the larger Alaska coastal communities. The evaluations of geologic hazards that follow, although based only upon reconnaissance studies and, therefore, subject to revision, will provide broad guidelines useful in city and land-use planning. It is hoped that the knowledge gained will result in new facilities being built in the best possible geologic environments and being designed so as to minimize future loss of life and property damage. Haines, which is in the northern part of southeastern Alaska approximately 75 miles northwest of Juneau, had a population, of about 700 people in 1970. It is built at the northern end of the Chilkat Peninsula and lies within the Coast Mountains of the Pacific Mountain system. The climate is predominantly marine and is characterized by mild winters and cool summers. The mapped area described in this report comprises about 17 square miles of land; deep fiords constitute most of the remaining mapped area that is evaluated in this study. The Haines area was covered by glacier ice at least once and probably several times during the Pleistocene Epoch. The presence of emergent marine deposits, several hundred feet above sea level, demonstrates that the land has been uplifted relative to sea level since the last major deglaciation of the region about 10,000 years ago. The rate of relative uplift of the land at Haines during the past 39 years is 2.26 cm per year. Most or all of this uplift appears to be due to rebound as a result of deglaciation. Both bedrock and surficial deposits are present in the area. Metamorphic and igneous rocks constitute the exposed bedrock. The metamorphic rocks consist of metabasalt of Mesozoic age and pyroxenite of probable early middle Cretaceous age. The igneous rocks consist of diorite and quartz diorite (tonalite) of Cretaceous age. Sedimentary rocks of Tertiary age may be present in the mapped area but are not exposed. The surficial deposits of Quaternary age,-have been divided into the following map units on the basis of time Of deposition, mode of origin, and grain size: (1) undifferentiated drift deposits, (2) outwash and Ice-contact deposits; (3) elevated fine-grained marine deposits, (4) elevated shore and delta deposits, (5) alluvial fan deposits, (6) colluvial deposits, (7) modern beach deposits, (8) Chilkat River flood-plain and delta deposits, and (9) manmade fill. Offshore deposits are described but are not mapped. Southeastern Alaska lies within the tectonically active belt that rims the northern Pacific Basin and has been active since at least early Paleozoic time. The outcrop pattern is the result of late Mesozoic and Tertiary deformational, metamorphic, and intrusive events. Large-scale faulting has been common. The two most prominent inferred fault systems in southeastern Alaska and surrounding regions are: (1) The Denali fault system and (2) the Fairweather-Queen Charlotte Islands fault system. In the general area of Haines, rocks of Mesozoic age northeast of Chilkat River have a simple monoclinal structure. Paleozoic-Mesozoic rocks southwest of Chilkat River are gently to rather complexly folded. Several major and numerous minor faults probably transect the general area of Haines but their exact location and character can only be inferred because their traces are coincident to the long axes of fiords and river valleys, where they are concealed by water or by valley-floor deposits. Inferred faults in or near the Haines mapped area are: (1) Chilkat River fault, (2) Chilkoot fault, (3) Takhin fault, and (4) faults in the saddle area at Haines. Southeastern Alaska lies in one of the two most seismically active zones in Alaska, a State where 6 percent of the world's shallow earthqua

Open-File Report↗

California State Waters Map Series — Offshore of Monterey, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath bathymetry data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Offshore of Monterey map area in central California is located on the Pacific Coast, about 120 km south of San Francisco. Incorporated cities in the map area include Seaside, Monterey, Marina, Pacific Grove, Carmel-by-the-Sea, and Sand City. The local economy receives significant resources from tourism, as well as from the Federal Government. Tourist attractions include the Monterey Bay Aquarium, Cannery Row, Fisherman’s Wharf, and the many golf courses near Pebble Beach, and the area serves as a gateway to the spectacular scenery and outdoor activities along the Big Sur coast to the south. Federal facilities include the Army’s Defense Language Institute, the Naval Postgraduate School, and the Fleet Numerical Meteorology and Oceanography Center (operated by the Navy). In 1994, Fort Ord army base, located between Seaside and Marina, was closed; much of former army base land now makes up the Fort Ord National Monument, managed by the U.S. Bureau of Land Management as part of the National Landscape Conservation System. In addition, part of the old Fort Ord is now occupied by California State University, Monterey Bay. The offshore part of the map area lies entirely within the Monterey Bay National Marine Sanctuary, one of the nation’s largest marine sanctuaries. State beaches and parks within the map area include Fort Ord Dunes State Park and the Marina, Monterey, and Asilomar State Beaches, as well as Carmel River State Beach, which includes the Carmel River Lagoon and Wetland Natural Preserve. The map area also includes all or part of several State Marine Protected Areas, including the Carmel Pinnacles, Asilomar, and Lovers Point–Julia Platt State Marine Reserves, as well as the Carmel Bay, Pacific Grove Marine Gardens, Edward F. Ricketts, and Portuguese Ledge State Marine Conservation Areas. The coastal zone in the map area is characterized by two distinct physiographies. From Marina to Monterey, sandy beaches are backed by a belt of sand dunes, as much as 30 to 40 m high and as wide as 8 km. The Salinas River supplies the sand for the beaches and dunes. Nearshore sediment transport is primarily to the south, in the southern Monterey littoral cell. Along the Monterey peninsula, which lies at the north end of the rugged Santa Lucia Range, coastal relief is very different. The peninsula is characterized largely by low marine terraces that formed mostly on hard and relatively stable granitic bedrock. Carmel Beach in Carmel-by-the-Sea is the longest continuous beach in this area; bedrock points and small pocket beaches characterize most of the rest of the peninsula. The Carmel River littoral cell extends along the coast from Point Pinos to Point Lobos (just south of the map area), including Carmel Beach; sediment transport is primarily to the south. The granitic rocks that crop out so prominently along the Monterey peninsula make up part of the Salinian block, a crustal terrane that in this area lies west of the San Andreas Fault and east of the San Gregorio Fault. The strike-slip San Andreas Fault Zone, which lies just 26 km east of the map area, is the most important structure within the Pacific–North American transform plate boundary. The San Gregorio Fault, a secondary fault within the distributed plate boundary, cuts through (and is roughly aligned with) Carmel Canyon, a submarine canyon in the southwest corner of the map area that is part of the Monterey Canyon system. The San Gregorio Fault Zone is part of a fault system that is present predominantly in the offshore for about 400 km, from Point Conception in the south (where it is known as the Hosgri Fault) to Bolinas and Point Reyes in the north. The offshore part of the map area primarily consists of relatively flat continental shelf, bounded on the west by the steep flanks of Carmel Canyon. Shelf width varies from 2 to 3 km in the southern part of the map area, near the mouth of Carmel Canyon, to 14 km in Monterey Bay. Bedrock beneath the shelf is overlain in many areas by variable amounts (0 to 16 m) of upper Quaternary shelf and nearshore sediments deposited as sea level fluctuated in the late Pleistocene. “Soft-induration,” unconsolidated sediment is the dominant (about 63 percent) habitat type on the continental shelf, followed by “hard-induration” rock and boulders (about 34 percent) and “mixed-induration” substrate (about 3 percent). At water depths of about 100 to 130 m, the shelf break approximates the shoreline during the sea-level lowstand of the Last Glacial Maximum, about 21,000 years ago. Carmel Canyon and other parts of the Monterey Canyon system in the map area extend from the shelf break to water depths that reach 1,600 m. Most of the extensive incision of the shelf break and canyon flanks probably occurred during repeated Quaternary sea-level lowstands. The relatively straight floor of Carmel Canyon notably is aligned with the San Gregorio Fault Zone. Mixed hard-soft substrate is the most common (about 51 percent) habitat type in Carmel Canyon; hard bedrock and soft, unconsolidated sediment cover about 40 percent and 9 percent of canyon habitat, respectively. This part of the central California coast is exposed to large North Pacific swells from the northwest throughout the year. Wave heights range from 2 to 10 m, the larger swells occurring from October to May. During El Niño–Southern Oscillation (ENSO) events, winter storms track farther south than they do in normal (non-ENSO) years, thereby impacting the map area more frequently and with waves of larger heights. Benthic species observed in the map area are natives of the cold-temperate biogeographic zone that is called either the “Oregonian province” or the “northern California ecoregion.” This biogeographic province is maintained by the long-term stability of the southward-flowing California Current, the eastern limb of the North Pacific subtropical gyre that flows from southern British Columbia to Baja California. Biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. An observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. The large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high-wave-energy environments. The kelp beds are well-known habitat for the population of southern sea otters. Common fish species found in the kelp beds and rocky reefs include lingcod and various species of rockfish and greenling.

California↗

Novel insights into the genetic population connectivity of transient whale sharks (Rhincodon typus) in Pacific Panama provide crucial data for conservation efforts

The whale shark ( Rhincodon typus ) is an endangered and highly migratory species, of which solitary individuals or aggregations are observed in oceans worldwide and for which conservation efforts are hindered by a lack of comprehensive data on genetic population connectivity. Tissue samples were collected from wandering whale sharks in Pacific Panama to determine genetic diversity, phylogeographic origin, and possible global and local connectivity patterns using a 700–800 bp fragment of the mitochondrial control region gene. Genetic diversity among samples was high, with five new haplotypes and nine polymorphic sites identified among the 15 sequences. Haplotype diversity ( H d = 0.83) and nucleotide diversity (π = 0.00516) were similar to those reported in other studies. Our sequences, in particular haplotypes PTY1 and PTY2 , were similar to those previously reported in the Arabian Gulf and the Western Indian Ocean populations (a novel occurrence in the latter case). Haplotypes PTY3 , PTY4 , and PTY5 were similar to populations in Mexico and the Gulf of California. In contrast, the only populations to which our Panamanian sequences were genetically dissimilar were those from the Atlantic Ocean. The absence of reference sequences in GenBank from southern sites in the Eastern Tropical Pacific, such as Galapagos (Ecuador), Gorgona and Malpelo Islands (Colombia), and Coco Island (Costa Rica), reduced our capacity to genetically define regional patterns. Genetic differentiation and connectivity were also assessed using an analysis of molecular variance (AMOVA), which showed a similar population structure (five groups) to the neighbor-joining tree. Other population features based on neutrality tests, such as Tajima’s D and Fu’s Fs statistics, showed positive values for Panama of 0.79 and 1.61, respectively. Positive values of these statistics indicate a lack of evidence for population expansion among the sampled individuals. Our results agree with previous reports suggesting that whale sharks can travel over long distances and that transboundary conservation measures may be effective for species protection.

Gulf of Chiriqu↗

The shallow-water fish assemblage of Isla del Coco National Park, Costa Rica: Structure and patterns in an isolated, predator-dominated ecosystem

Fishes at Isla del Coco National Park, Costa Rica, were surveyed as part of a larger scientific expedition to the area in September 2009. The average total biomass of nearshore fishes was 7.8 tonnes per ha, among the largest observed in the tropics, with apex predators such as sharks, jacks, and groupers accounting for nearly 40% of the total biomass. The abundance of reef and pelagic sharks, particularly large aggregations of threatened species such as the scalloped hammerhead shark (up to 42 hammerheads ha-1) and large schools of jacks and snappers show the capacity for high biomass in unfished ecosystems in the Eastern Tropical Pacific. However, the abundance of hammerhead and reef whitetip sharks appears to have been declining since the late 1990s, and likely causes may include increasing fishing pressure on sharks in the region and illegal fishing inside the Park. One Galapagos shark tagged on September 20, 2009 in the Isla del Coco National Park moved 255km southeast towards Malpelo Island in Colombia, when it stopped transmitting. These results contribute to the evidence that sharks conduct large-scale movements between marine protected areas (Isla del Coco, Malpelo, Galápagos) in the Eastern tropical Pacific and emphasize the need for regional-scale management. More than half of the species and 90% of the individuals observed were endemic to the tropical eastern Pacific. These high biomass and endemicity values highlight the uniqueness of the fish assemblage at Isla del Coco and its importance as a global biodiversity hotspot.

Cocos Island, Isla Del Coco↗

A socio-ecological imperative for broadening participation in coastal and estuarine research and management

For most of the scientific disciplines associated with coastal and estuarine research, workforce representation does not match the demographics of communities we serve, especially for Black, Hispanic or Latino, and Indigenous peoples. This essay provides an overview of this inequity and identifies how a scientific society can catalyze representational, structural, and interactional diversity to achieve greater inclusion. Needed changes go beyond representational diversity and require an intentional commitment to build capacity through inclusivity and community engagement by supporting anti-racist policies and actions. We want to realize a sense of belonging on the part of scientists in society at large and enable research pursuits through a lens of social justice in service of coastal communities. Minimally, this framework offers an avenue for increased recruitment of individuals from more diverse racial and ethnic identities. More broadly, the mechanisms described here aim to create a culture in scientific societies in which social justice, driven by anti-racist actions, produces systemic change in how members of scientific societies approach, discuss, and address issues of inequity. We have written this essay for members of the coastal and marine science community who are interested in change. We aim to call in new voices, allies, and champions to this work.

Estuaries and Coasts↗