SEARCH · Geology Reports

Results for “Energy Sources”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources

USGS1947

Present investigations of radioactive raw materials by the Geological Survey and a recommended program for future work

The Geological Survey's program of investigation of radioactive raw materials is presented herewith under present investigations, plans for future investigations, plan of operation, and cost of operation. This report was prepared at the request of the Atomic Energy Commission. Present investigations are summarized to show the scope of the present Trace Elements program, grouping individual projects into related types of investigations. Plans for future investigations on an expanded scale are outlined. These should provide sufficient data and knowledge of the occurrence and availability of uranium, thorium, and related elements, to permit a more complete evaluation of domestic resources. Reconnaissance projects are designed to discover possible new sources of uranium and thorium and to select areas and materials warranting further investigation. Typical projects leading to the estimation of reserves are the investigation of the carnotite ores of the Colorado Plateau by geologic mapping, exploratory drilling, and related research, and investigation of asphaltic sandstone in Emery County, Utah. Extensive research will be undertaken to establish the principles governing the geological and geochemical relations of uranium, thorium, and associated elements as an essential guide in appraising domestic resources. Particular emphasis will be placed on phosphatic rocks and black shales which offer ultimate resources of uranium far greater than carnotite ores. All the foregoing investigations will be accompanied by chemical, gephysical, and mineralogical research and analytical work. Under plan of operation is discussed the organization of the Trace Elements Unit, space requirements for laboratory and office, the scheduling of investigations, and other related problems. The proposed scheduling of work calls for approximately 109, 173, and 203 man years in fiscal years 1948, 1949, and 1950 respectively. Definite plans have been formulated only for the next three fiscal years, by which time it is assumed the program will reach stable proportions or can be altered as experience dictates. Under cost of operation is set forth the funds available in fiscal year 1947, the status of funds transferred from Atomic Services (14-217/80920), and funds necessary in succeeding fiscal years. The estimate for fiscal year 1948 inclues a non-recurring item of $1,025,000 for establishing adequate laboratories for chemical, physical, spectrographic and mineralogic research and analytical work. The total funds required in fiscal years 1948, 1949, and 1950 to support the proposed program will be $2,440,000, $2,161,000 and $2,198,000 respectively. The Geological survey anticipates contributing from its appropriation in fiscal years 1948, 1949 and 1950 approximately $243,000, $350,000, and $400,000 respectively; the balance of the necessary funds to be contributed by the Atomic Energy Commission in fiscal years 1948, 1949, and 1950 will be approximately $2,196,900, $1,811,000, and $1,798,000 respectively.

Trace Elements Investigations↗

USGS2016

A semelparous fish continues upstream migration when exposed to alarm cue, but adjusts movement speed and timing

Animals make trade-offs between predation risk and pursuit of opportunities such as foraging and reproduction. Trade-offs between antipredator behaviours and foraging are well suited to manipulation in laboratory and field settings and have generated a vast compendium of knowledge. However, much less is known about how animals manage trade-offs between predation risk and pursuit of reproductive opportunities in the absence of the confounding effects of foraging. In the present study, we investigated how the nonfeeding migratory life stage of sea lamprey, Petromyzon marinus , responds to odour from dead conspecifics (a cue that induces avoidance behaviours in laboratory and field studies). We released groups of PIT-tagged sea lamprey 65 m from the shore of Lake Michigan or 287 m upstream in Carp Lake River and used antennas to detect their movements in the river. As the breeding season progressed, sea lamprey initiated upstream movement earlier and were more likely to enter the river. Sea lamprey that began the night in Lake Michigan entered Carp Lake River at higher rates and accelerated upstream when exposed to high concentrations of alarm cue, consistent with animals attempting to minimize time spent in risky areas. Sea lampreys that began the night in the river delayed upstream movement when exposed to alarm cue, consistent with animals sheltering and gathering information about a source of risk. We attribute this context-specific reaction to alarm cue to differences in perceived vulnerability to predation in sheltered positions in the river versus exposed positions in the lake. Once in the river, the vast majority of sea lamprey moved upstream independent of alarm cue or Julian date. Although life-history-induced time and energy budgets place rigid constraints on the direction of migration, sea lamprey attend to predation risk by modifying movement timing and speed.

Animal Behaviour↗

USGS2023

Monitoring interdecadal coastal change along dissipative beaches via satellite imagery at regional scale

Coastal morphological changes can be assessed using shoreline position observations from space. However, satellite-derived waterline (SDW) and shoreline (SDS; SDW corrected for hydrodynamic contributions and outliers) detection methods are subject to several sources of uncertainty and inaccuracy. We extracted high-spatiotemporal-resolution (~50 m-monthly) time series of mean high water shoreline position along the Columbia River Littoral Cell (CRLC), located on the US Pacific Northwest coast, from Landsat missions (1984–2021). We examined the accuracy of the SDS time series along the mesotidal, mildly sloping, high-energy wave climate and dissipative beaches of the CRLC by validating them against 20 years of quarterly in situ beach elevation profiles. We found that the accuracy of the SDS time series heavily depends on the capability to identify and remove outliers and correct the biases stemming from tides and wave runup. However, we show that only correcting the SDW data for outliers is sufficient to accurately measure shoreline change trends along the CRLC. Ultimately, the SDS change trends show strong agreement with in situ data, facilitating the spatiotemporal analysis of coastal change and highlighting an overall accretion signal along the CRLC during the past four decades.

Oregon, Washington↗

USGS2018

Method to characterize inorganic particulates in lung tissue biopsies using field emission scanning electron microscopy

Humans accumulate large numbers of inorganic particles in their lungs over a lifetime. Whether this causes or contributes to debilitating disease over a normal lifespan depends on the type and concentration of the particles. We developed and tested a protocol for in situ characterization of the types and distribution of inorganic particles in biopsied lung tissue from three human groups using field emission scanning electron microscopy (FE-SEM) combined with energy dispersive spectroscopy (EDS). Many distinct particle types were recognized among the 13 000 particles analyzed. Silica, feldspars, clays, titanium dioxides, iron oxides and phosphates were the most common constituents in all samples. Particles were classified into three general groups: endogenous , which form naturally in the body; exogenic particles, natural earth materials; and anthropogenic particles, attributed to industrial sources. These in situ results were compared with those using conventional sodium hypochlorite tissue digestion and particle filtration. With the exception of clays and phosphates, the relative abundances of most common particle types were similar in both approaches. Nonetheless, the digestion/filtration method was determined to alter the texture and relative abundances of some particle types. SEM/EDS analysis of digestion filters could be automated in contrast to the more time intensive in situ analyses.

Toxicology Mechanisms and Methods↗

USGS2011

The effect of travel loss on evolutionarily stable distributions of populations in space

A key assumption of the ideal free distribution (IFD) is that there are no costs in moving between habitat patches. However, because many populations exhibit more or less continuous population movement between patches and traveling cost is a frequent factor, it is important to determine the effects of costs on expected population movement patterns and spatial distributions. We consider a food chain (tritrophic or bitrophic) in which one species moves between patches, with energy cost or mortality risk in movement. In the two-patch case, assuming forced movement in one direction, an evolutionarily stable strategy requires bidirectional movement, even if costs during movement are high. In the N -patch case, assuming that at least one patch is linked bidirectionally to all other patches, optimal movement rates can lead to source-sink dynamics where patches with negative growth rates are maintained by other patches with positive growth rates. As well, dispersal between patches is not balanced (even in the two-patch case), leading to a deviation from the IFD. Our results indicate that cost-associated forced movement can have important consequences for spatial metapopulation dynamics. Relevance to marine reserve design and the study of stream communities subject to drift is discussed.

American Naturalist↗

USGS2020

Teleseismic P‐qave coda autocorrelation imaging of crustal and basin structure, Bighorn Mountains Region, Wyoming, U.S.A.

We demonstrate successful crustal imaging via teleseismic P ‐wave coda autocorrelation, using data recorded on a 261 station array of vertical‐component high‐frequency geophones in the area of the Bighorn Mountains, Wyoming, U.S.A. We autocorrelate the P ‐wave coda of 30 teleseismic events and use phase‐weighted stacking to yield seismic profiles comparable to low‐passed versions of those produced via controlled‐source vertical seismic reflection. Our process recovers reflections from the bottoms of the Bighorn and Powder River basins that flank the Bighorn Mountains. We also identify a mid‐crustal reflector that aligns with a region of increased reflectivity, previously interpreted as a Precambrian province boundary. Our results demonstrate the utility of crustal imaging with teleseismic P ‐wave coda energy using modern large‐array seismic data, and they corroborate previous interpretations of crustal structures in the study area.

Wyoming↗

USGS2007

Distinguishing sources of ground water recharge by using δ2H and δ18O

Stable isotope values of hydrogen and oxygen from precipitation and ground water samples were compared by using a volumetrically based mixing equation and stable isotope gradient to estimate the season and location of recharge in four basins. Stable isotopes were sampled at 11 precipitation sites of differing elevation during a 2-year period to quantify seasonal stable isotope contributions as a function of elevation. Supplemental stable isotope data collected by the International Atomic Energy Association during a 14-year period were used to reduce annual variability of the mean seasonal stable isotope data. The stable isotope elevation relationships and local precipitation elevation relationships were combined by using a digital elevation model to calculate the total volumetric contribution of water and stable isotope values as a function of elevation within the basins. The results of these precipitation calculations were compared to measured ground water stable isotope values at the major discharge points near the terminus of the basins. Volumetric precipitation contributions to recharge were adjusted to isolate contributing elevations. This procedure provides an improved representation of recharge contributions within the basins over conventional stable isotope methods. Stable isotope values from wells and springs at the terminus of each basin were used to infer the elevations of precipitation important for recharge of the regional ground water flow system. Ancillary climatic, geologic, and stable isotope values were used to further constrain the location where precipitation is entering the ground water flow system.

Arizona↗

USGS2020

Seabird‐induced natural mortality of forage fish varies with fish abundance: Evidence from five ecosystems

Forage fish populations often undergo large and rapid fluctuations in abundance. However, most of their predators are buffered against such fluctuations owing to their slower pace of life, which allows them to maintain more stable populations, at least during short periods of food scarcity. In this study, we investigated top‐down processes exerted by seabirds on forage fish stocks in five contrasted marine ecosystems, compiling numerous data sets on seabird counts, diets, energetic needs and prey energy content and abundance. Off Norway, South Africa, Peru, Sweden and Scotland, we found that predation pressure—estimated as the proportion of a fish stock consumed by seabirds—was generally low (median = 1%), but increased sharply at low levels of prey abundance. When prey biomass decreased below 15–18% of its maximum recorded value, predation by seabirds became a source of important additional pressure on prey stocks (~20% of prey biomass is consumed by seabirds). An earlier empirical study advocated for keeping forage stocks from falling below a threshold of 33% of long‐term maximum prey biomass in order to safeguard seabird breeding success, but here we further suggest that a threshold of 18% should be considered as a limit not to be exceeded for the sake of the forage fish themselves, and below which extra cautious management of fisheries may be required. Nevertheless, despite exceptionally high rates of predation on some occasions, predation pressure was not correlated with prey dynamics, suggesting an absence of prey entrapment due to seabirds alone in these five ecosystems.

Fish and Fisheries↗

USGS2003

U.S. Geological Survey Activities Related to American Indians and Alaska Natives Fiscal Year 2003

Introduction Information is a resource for Native American governments, communities, organizations, and people. The U.S. Geological Survey (USGS) provides technical expertise, reports, and other impartial information sources that benefit Native Americans interested in subsistence issues, water, resources and land use, and the health of many parts of the environment. Native decisions based in USGS data and analyses support the goals of Native self-sufficiency, economic development, and conservation. The USGS works in cooperation with American Indian and Alaska Native governments, conducting research on: water energy and mineral resources; animals and plants of environmental, economic, or subsistence importance; and natural hazards. Digital data on cartography, energy and mineral resources, streamflow, biota, and other topics are available to American Indian and Alaska Native individuals and institutions. The USGS also recognizes the need to learn from and share knowledge with Native peoples. This report describes most of the activities that the USGS conducted with American Indian and Alaska Native governments, educational institutions, and individuals during Federal fiscal year (FY) 2003. Some of these USGS activities were conducted cooperatively with the Bureau of Indian Affairs (BIA) or other Federal entities. Others were collaborations with Tribes, Tribal organizations, and professional societies.

Report↗

USGS2017

Widespread legacy brine contamination from oil production reduces survival of chorus frog larvae

Advances in drilling techniques have facilitated a rapid increase in hydrocarbon extraction from energy shales, including the Williston Basin in central North America. This area overlaps with the Prairie Pothole Region, a region densely populated with wetlands that provide numerous ecosystem services. Historical (legacy) disposal practices often released saline co-produced waters (brines) with high chloride concentrations, affecting wetland water quality directly or persisting in sediments. Despite the potential threat of brine contamination to aquatic habitats, there has been little research into its ecological effects. We capitalized on a gradient of legacy brine-contaminated wetlands in northeast Montana to conduct laboratory experiments to assess variation in survival of larval Boreal Chorus Frogs ( Pseudacris maculata ) reared on sediments from 3 local wetlands and a control source. To help provide environmental context for the experiment, we also measured chloride concentrations in 6 brine-contaminated wetlands in our study area, including the 2 contaminated sites used for sediment exposures. Survival of frog larvae during 46- and 55-day experiments differed by up to 88% among sediment sources (Site Model) and was negatively correlated with potential chloride exposure (Chloride Model). Five of the 6 contaminated wetlands exceeded the U.S. EPA acute benchmark for chloride in freshwater (860 mg/L) and all exceeded the chronic benchmark (230 mg/L). However, the Wetland Site model explained more variation in survival than the Chloride Model, suggesting that chloride concentration alone does not fully reflect the threat of contamination to aquatic species. Because the profiles of brine-contaminated sediments are complex, further surveys and experiments are needed across a broad range of conditions, especially where restoration or remediation actions have reduced brine-contamination. Information provided by this study can help quantify potential ecological threats and help land managers prioritize conservation strategies as part of responsible and sustainable energy development.

Montana, North Dakota, South Dakota↗

USGS2016

Sulfur species in source rock bitumen before and after hydrous pyrolysis determined by X-ray absorption near-edge structure

The sulfur speciation of source rock bitumen (chloroform-extractable organic matter in sedimentary rocks) was examined using sulfur K-edge X-ray absorption near-edge structure (XANES) spectroscopy for a suite of 11 source rocks from around the world. Sulfur speciation was determined for both the native bitumen in thermally immature rocks and the bitumen produced by thermal maturation of kerogen via hydrous pyrolysis (360 °C for 72 h) and retained within the rock matrix. In this study, the immature bitumens had higher sulfur concentrations than those extracted from samples after hydrous pyrolysis. In addition, dramatic and systematic evolution of the bitumen sulfur moiety distributions following artificial thermal maturation was observed consistently for all samples. Specifically, sulfoxide sulfur (sulfur double bonded to oxygen) is abundant in all immature bitumen samples but decreases substantially following hydrous pyrolysis. The loss in sulfoxide sulfur is associated with a relative increase in the fraction of thiophene sulfur (sulfur bonded to aromatic carbon) to the extent that thiophene is the dominant sulfur form in all post-pyrolysis bitumen samples. This suggests that sulfur moiety distributions might be used for estimating thermal maturity in source rocks based on the character of the extractable organic matter.

Energy & Fuels↗

USGS2021

Aquatic foods to nourish nations

Despite contributing to healthy diets for billions of people, aquatic foods are often undervalued as a nutritional solution because their diversity is often reduced to the protein and energy value of a single food type (‘seafood’ or ‘fish’) 1 , 2 , 3 , 4 . Here we create a cohesive model that unites terrestrial foods with nearly 3,000 taxa of aquatic foods to understand the future impact of aquatic foods on human nutrition. We project two plausible futures to 2030: a baseline scenario with moderate growth in aquatic animal-source food (AASF) production, and a high-production scenario with a 15-million-tonne increased supply of AASFs over the business-as-usual scenario in 2030, driven largely by investment and innovation in aquaculture production. By comparing changes in AASF consumption between the scenarios, we elucidate geographic and demographic vulnerabilities and estimate health impacts from diet-related causes. Globally, we find that a high-production scenario will decrease AASF prices by 26% and increase their consumption, thereby reducing the consumption of red and processed meats that can lead to diet-related non-communicable diseases 5 , 6 while also preventing approximately 166 million cases of inadequate micronutrient intake. This finding provides a broad evidentiary basis for policy makers and development stakeholders to capitalize on the potential of aquatic foods to reduce food and nutrition insecurity and tackle malnutrition in all its forms.

Nature↗

USGS2020

A continuously updated, geospatially rectified database of utility-scale wind turbines in the United States

Nearly 60,000 utility-scale wind turbines are installed in the United States as of July, 2019, representing over 97 gigawatts of electric power capacity; US wind turbine installations continue to grow at a rapid pace. Yet, until April 2018, no publicly-available, regularly updated data source existed to describe those turbines and their locations. Under a cooperative research and development agreement, analysts from three organizations collaborated to develop and release the United States Wind Turbine Database (USWTDB) - a publicly available, continuously updated, spatially rectified data source of locations and attributes of utility-scale wind turbines in the United States. Technical specifications and wind facility data, incorporated from five sources, undergo rigorous quality control. The location of each turbine is visually verified using high-resolution aerial imagery. The quarterly-updated data are available in a variety of formats, including an interactive web application, comma-separated values (CSV), shapefile, and application programming interface (API). The data are used widely by academic researchers, engineers and developers from wind energy companies, government agencies, planners, educators, and the general public.

Scientific Data↗

USGS2011

Porphyry copper assessment of British Columbia and Yukon Territory, Canada: Chapter C in Global mineral resource assessment

The U.S. Geological Survey does regional, national, and global assessments of resources (mineral, energy, water, biologic) to provide science in support of land management and decision making. Mineral resource assessments provide a synthesis of available information about where mineral deposits are known and suspected to be in the Earth’s crust, which commodities may be present, and estimates of amounts of resources that may be present in undiscovered deposits. Canada is an important source of copper, consistently ranking as one of the top 10 world producers during the past decade (2000–2010). The preponderance of this production has been from porphyry-copper-type deposits in the western Canadian Cordillera. A probabilistic mineral resource assessment of undiscovered resources associated with porphyry copper deposits in western Canada was completed as part of a global mineral resource assessment. The purpose of the assessment was to (1) compile a database of known deposits and significant prospects, (2) delineate permissive areas (tracts) for undiscovered porphyry copper deposits that may be present in the upper kilometer (minimally) of the Earth’s crust, and (3) provide probabilistic estimates of amounts of copper (Cu), molybdenum (Mo), gold (Au), and silver (Ag) that could be contained in undiscovered porphyry copper deposits in the tracts. The study was done by the U.S. Geological Survey (USGS) in collaboration with geologists from the British Columbia Geological Survey, Yukon Geological Survey, and industry consultants. The database of known deposits and significant prospects includes an inventory of mineral resources in 89 known porphyry copper (and 2 related copper-bearing polymetallic vein) ore zones, representing 50 porphyry copper deposits, and lists key characteristics of 280 additional porphyry copper and related copper-bearing prospects, as indicated by currently available exploration results, which also are summarized. Resource and exploration and development activity are updated with information current through April 2010. The delineation of permissive tracts and probabilistic estimation of resources in undiscovered deposits were done using the USGS three-part mineral resource assessment approach. Permissive tracts are defined in accordance with descriptive models for porphyry copper deposits to include igneous rocks and known deposits and prospects within magmatic arcs related to convergent plate-margin boundary zones. Frequency distributions of total tonnages and average grades of thoroughly explored deposits were used as models for undiscovered deposits and include a new grade and tonnage model for calc-alkaline porphyry Cu±Mo±Au deposits in western Canada. Five permissive tracts for the occurrence of porphyry copper deposits were delineated: 2 island-arc tracts, 1 tract of transitional, mixed island-arc and continental arc affinities, and 2 continental arc tracts. In permissive tract 003pCu2001, calc-alkaline igneous rocks of Middle Triassic to Late Jurassic age in accreted island-arc terranes of the Intermontane belt are assessed for calc-alkaline porphyry Cu±Mo±Au deposits. The area of this tract is 175,250 km 2 . In 12 known deposits, the total reported tonnage of ore is 8,100 million metric tons (Mt) containing 24.6 Mt copper. An estimated 6.9 undiscovered deposits contain a calculated mean of 8.9 Mt copper and a median of 6.9 Mt copper. The spatial density for the 18.9 known plus estimated undiscovered deposits in this tract is approximately 11 deposits per 100,000 km 2 . In permissive tract 003pCu2002, alkaline igneous rocks of Middle Triassic to Late Jurassic age within the Intermontane accreted island-arc terranes are assessed for alkaline porphyry Cu-Au deposits. The area of this tract is 109,290 km 2 . In 12 known deposits the total reported tonnage of ore is 6,440 Mt, containing 20.9 Mt copper. An estimated 7 undiscovered deposits contain a calculated mean of 22 Mt copper and a median of 13 Mt copper. The spatial density for the 19 known plus estimated undiscovered deposits in this tract is approximately 17 deposits per 100,000 km 2 . In permissive tract 003pCu2003, calc-alkaline igneous rocks of Late Triassic to Early Cretaceous age within the accreted Insular terranes of mixed island-arc and continental arc affinities are assessed for calc-alkaline porphyry Cu±Mo±Au deposits. The area of this tract is 58,360 km 2 . The total tonnage of ore reported in the 2 known deposits is 1,160 Mt containing 3.17 Mt copper. An estimated 2.3 undiscovered deposits contain a calculated mean of 3 Mt copper and a median of 1.9 Mt copper. The spatial density for the 4.3 known plus estimated undiscovered deposits in this tract is approximately 7 deposits per 100,000 km 2 . In permissive tract 003pCu2004, calc-alkaline igneous rocks in continental magmatic arcs of Jurassic to Eocene age are assessed for porphyry Cu±Mo±Au deposits. The area of this tract is 639,500 km 2 . The total tonnage of ore reported for the 23 known deposits is 6,520 Mt containing 17.9 Mt copper. An estimated 9.6 undiscovered deposits contain a calculated mean of 13 Mt copper and a median of 11 Mt copper. The spatial density for the 32.6 known deposits plus the estimated undiscovered deposits in this tract is approximately 5 deposits per 100,000 km 2 . In permissive tract 003pCu2005, calc-alkaline igneous rocks in continental magmatic arcs of Oligocene to Pliocene age are assessed for porphyry Cu±Mo±Au deposits. The area of this tract is 32,840 km 2 . The total tonnage of ore reported for the 1 known deposit is 44.8 Mt containing 0.224 Mt copper. An estimated 1.4 undiscovered deposits contain a calculated mean of 1.8 Mt copper and a median of 0.72 Mt copper. The spatial density for the 2.4 known plus estimated undiscovered deposits in this permissive tract is approximately 7 deposits per 100,000 km 2 . Western Canada has been thoroughly explored for porphyry copper deposits. The total estimated copper contained in known deposits is about 66.8 Mt (based on 2010 data), as compared to a 49 Mt mean of estimated copper in undiscovered deposits and a 34 Mt median of estimated copper in undiscovered deposits. The copper contained in known porphyry copper deposits represents about 58 percent of the total of known and undiscovered porphyry copper deposits (based on mean values). About 86 percent of the increase in estimated copper resources between 1993 and 2009 resulted from the discovery of extensions to known deposits. Nevertheless, exploration for undiscovered deposits continues, especially in and around significant prospects and in parts of permissive tracts that are mostly hidden beneath younger volcanic, sedimentary, or vegetated surficial cover.

British Columbia, Yukon Territory↗

USGS1987

Geophysical well log analysis of fractured granitic rocks at Atikokan, Ontario, Canada

Two boreholes, drilled to approximate depths of 750 and 1,260 m in a granitic intrusion located near Atikokan, Ontario, were studied by obtaining a full suite of conventional borehole geophysical logs. In addition, selected intervals in these boreholes were logged with a borehole acoustic televiewer that produces a high-resolution image of the borehole wall, an acoustic waveform-logging system using 34-kiloHertz magnetostrictive and 5-kiloHertz sparker sources, and a highly sensitive heat-pulse flowmeter. Emphasis was on identifying and characterizing fracture zones that represent groundwater conduits in deeper portions of the granite, and on characterizing the properties of the largest intervals of unfractured granite. Major fracture zones were indicated by correlating geophysical log anomalies detected on the suite of conventional logs (unpublished data from Atomic Energy of Canada). However, several other anomalies, were identified as mafic intrusions of approximately the same thickness as major fracture zones. Geophysical log anomalies were compared for all major fracture zones that could serve as significant groundwater conduits, and fracture zone permeability is estimated on the basis of acoustic tube-wave attenuation in these intervals. Acoustic televiewer logs obtained at depths below 1,000 m in the deeper well indicate that most of the few fractures identified on core at these depths do not remain open enough under in situ conditions to produce detectable anomalies in acoustic refraction. Flowmeter data indicate that some groundwater circulation occurs in the upper portion of both boreholes. Water in the shallower of the two holes was observed to flow at 2.0 L/min; most of this flow entered the borehole at a depth < 25 m, and no flow occurred below a depth of 100 m. Downflow at rates < 0.5 L/min was determined to enter the deeper borehole within 20 m of the surface, and to exist at various fractures down to a depth of 250 m. (Author 's abstract)

Water-Resources Investigations Report↗

USGS2015

Automated calculation of surface energy fluxes with high-frequency lake buoy data

Lake Heat Flux Analyzer is a program used for calculating the surface energy fluxes in lakes according to established literature methodologies. The program was developed in MATLAB for the rapid analysis of high-frequency data from instrumented lake buoys in support of the emerging field of aquatic sensor network science. To calculate the surface energy fluxes, the program requires a number of input variables, such as air and water temperature, relative humidity, wind speed, and short-wave radiation. Available outputs for Lake Heat Flux Analyzer include the surface fluxes of momentum, sensible heat and latent heat and their corresponding transfer coefficients, incoming and outgoing long-wave radiation. Lake Heat Flux Analyzer is open source and can be used to process data from multiple lakes rapidly. It provides a means of calculating the surface fluxes using a consistent method, thereby facilitating global comparisons of high-frequency data from lake buoys.

Environmental Modelling and Software↗

USGS2014

A comprehensive analysis of small-passerine fatalities from collisions with turbines at wind energy facilities

Small passerines, sometimes referred to as perching birds or songbirds, are the most abundant bird group in the United States (US) and Canada, and the most common among bird fatalities caused by collision with turbines at wind energy facilities. We used data compiled from 39 studies conducted in the US and Canada to estimate the annual rate of small-bird fatalities. It was necessary for us to calculate estimates of small-bird fatality rates from reported all-bird rates for 30% of studies. The remaining 70% of studies provided data on small-bird fatalities. We then adjusted estimates to account for detection bias and loss of carcasses from scavenging. These studies represented about 15% of current operating capacity (megawatts [MW]) for all wind energy facilities in the US and Canada and provided information on 4,975 bird fatalities, of which we estimated 62.5% were small passerines comprising 156 species. For all wind energy facilities currently in operation, we estimated that about 134,000 to 230,000 small-passerine fatalities from collision with wind turbines occur annually, or 2.10 to 3.35 small birds/MW of installed capacity. When adjusted for species composition, this indicates that about 368,000 fatalities for all bird species are caused annually by collisions with wind turbines. Other human-related sources of bird deaths, (e.g., communication towers, buildings [including windows]), and domestic cats) have been estimated to kill millions to billions of birds each year. Compared to continent-wide population estimates, the cumulative mortality rate per year by species was highest for black-throated blue warbler and tree swallow; 0.043% of the entire population of each species was estimated to annually suffer mortality from collisions with turbines. For the eighteen species with the next highest values, this estimate ranged from 0.008% to 0.038%, much lower than rates attributed to collisions with communication towers (1.2% to 9.0% for top twenty species).

PLoS ONE↗

USGS2016

Overview with methods and procedures of the U.S. Geological Survey mineral-resource assessment of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming: Chapter A in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

This report, chapter A of Scientific Investigations Report 2016–5089, provides an overview of the U.S. Geological Survey (USGS) Sagebrush Mineral-Resource Assessment (SaMiRA). The report also describes the methods, procedures, and voluminous fundamental reference information used throughout the assessment. Data from several major publicly available databases and other published sources were used to develop an understanding of the locatable, leaseable, and salable mineral resources of this vast area. This report describes the geologic, mineral-occurrence, geochemical, geophysical, remote-sensing, and Bureau of Land Management mineral-case-status data used for the assessment, along with the methods for evaluating locatable mineral-resource potential. The report also discusses energy-resource data (oil and gas, coal, and geothermal) used in the assessment. Appendixes include summary descriptive mineral-deposit models that provide the criteria necessary to assess for the pertinent locatable minerals and market-demand commodity profiles for locatable mineral commodities relevant to the project. Datasets used in the assessment are available as USGS data releases.

Idaho, Montana, Nevada, Oregon, Utah, Wyoming↗