Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Developments in Water Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
USGS2016

Flood-inundation maps for a 9.1-mile reach of the Coast Fork Willamette River near Creswell and Goshen, Lane County, Oregon

Digital flood-inundation maps for a 9.1-mile reach of the Coast Fork Willamette River near Creswell and Goshen, Oregon, were developed by the U.S. Geological Survey (USGS) in cooperation with the U.S. Army Corps of Engineers (USACE). The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected stages at the USGS streamgage at Coast Fork Willamette River near Goshen, Oregon (14157500), at State Highway 58. Current stage at the streamgage for estimating near-real-time areas of inundation may be obtained at http://waterdata.usgs.gov/or/nwis/uv/?site_no=14157500&PARAmeter_cd=00065,00060 . In addition, the National Weather Service (NWS) forecasted peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, areas of inundation were provided by USACE. The inundated areas were developed from flood profiles simulated by a one-dimensional unsteady step‑backwater hydraulic model. The profiles were checked by the USACE using documented high-water marks from a January 2006 flood. The model was compared and quality assured using several other methods. The hydraulic model was then used to determine eight water-surface profiles at various flood stages referenced to the streamgage datum and ranging from 11.8 to 19.8 ft, approximately 2.6 ft above the highest recorded stage at the streamgage (17.17 ft) since 1950. The intervals between stages are variable and based on annual exceedance probability discharges, some of which approximate NWS action stages. The areas of inundation and water depth grids provided to USGS by USACE were used to create interactive flood‑inundation maps. The availability of these maps with current stage from USGS streamgage and forecasted stream stages from the NWS provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures as well as for post flood recovery efforts.

Oregon↗
USGS1998

Evaluating landscape health: Integrating societal goals and biophysical process

Evaluating landscape change requires the integration of the social and natural sciences. The social sciences contribute to articulating societal values that govern landscape change, while the natural sciences contribute to understanding the biophysical processes that are influenced by human activity and result in ecological change. Building upon Aldo Leopold's criteria for landscape health, the roles of societal values and biophysical processes in shaping the landscape are explored. A framework is developed for indicators of landscape health and integrity. Indicators of integrity are useful in measuring biological condition relative to the condition in landscapes largely unaffected by human activity, while indicators of health are useful in evaluating changes in highly modified landscapes. Integrating societal goals and biophysical processes requires identification of ecological services to be sustained within a given landscape. It also requires the proper choice of temporal and spatial scales. Societal values are based upon inter-generational concerns at regional scales (e.g. soil and ground water quality). Assessing the health and integrity of the environment at the landscape scale over a period of decades best integrates societal values with underlying biophysical processes. These principles are illustrated in two contrasting case studies: (1) the South Platte River study demonstrates the role of complex biophysical processes acting at a distance; and (2) the Kissimmee River study illustrates the critical importance of social, cultural and economic concerns in the design of remedial action plans. In both studies, however, interactions between the social and the biophysical governed the landscape outcomes. The legacy of evolution and the legacy of culture requires integration for the purpose of effectively coping with environmental change.

Journal of Environmental Management↗
USGS2007

Remote sensing and GIS technology in the Global Land Ice Measurements from Space (GLIMS) Project

Global Land Ice Measurements from Space (GLIMS) is an international consortium established to acquire satellite images of the world's glaciers, analyze them for glacier extent and changes, and to assess these change data in terms of forcings. The consortium is organized into a system of Regional Centers, each of which is responsible for glaciers in their region of expertise. Specialized needs for mapping glaciers in a distributed analysis environment require considerable work developing software tools: terrain classification emphasizing snow, ice, water, and admixtures of ice with rock debris; change detection and analysis; visualization of images and derived data; interpretation and archival of derived data; and analysis to ensure consistency of results from different Regional Centers. A global glacier database has been designed and implemented at the National Snow and Ice Data Center (Boulder, CO); parameters have been expanded from those of the World Glacier Inventory (WGI), and the database has been structured to be compatible with (and to incorporate) WGI data. The project as a whole was originated, and has been coordinated by, the US Geological Survey (Flagstaff, AZ), which has also led the development of an interactive tool for automated analysis and manual editing of glacier images and derived data (GLIMSView). This article addresses remote sensing and Geographic Information Science techniques developed within the framework of GLIMS in order to fulfill the goals of this distributed project. Sample applications illustrating the developed techniques are also shown. ?? 2006 Elsevier Ltd. All rights reserved.

Computers & Geosciences↗
USGS2020

Hydrologic conditions in Kansas, water year 2019

The U.S. Geological Survey Kansas Water Science Center, in cooperation with Federal, State, and local agencies, maintains a long-term network of hydrologic monitoring stations in the State of Kansas. These include a network of 217 real-time streamgages and 12 real-time reservoir-level monitoring stations in water year 2019. The data and associated analyses from the streamgages and monitoring stations provide a unique overview of hydrologic conditions and help improve the understanding of Kansas’ water resources. Annual assessments of hydrologic conditions are made by comparing statistical analyses of current and past water year data for the period of record. Long-term monitoring of hydrologic conditions in Kansas provides imperative information for many uses including managing water resources and protecting human life and property and promoting agricultural practices, industrial activities, operation of reservoirs , development of infrastructure, ecological assessments, and recreational purposes.

Kansas↗
USGS2023

Wide-area debris field and seabed characterization of a deep ocean dump site surveyed by autonomous underwater vehicles

Disposal of industrial and hazardous waste in the deep ocean was a pervasive global practice near coastlines in the 20th century. Uncertainty in the quantity, location, and contents of dumped materials at historical disposal sites underscores ongoing risks to marine ecosystems and human health. This study presents analysis of a 150-km2 wide-area sidescan sonar survey conducted in March 2021 with two autonomous underwater vehicles (AUVs) at an offshore dumpsite in San Pedro Basin, California. Previous camera surveys located 60 barrels and other debris; sediment analysis in the region showed varying concentrations of the insecticidal chemical Dichlorodiphenyl-trichloroethane (DDT), for which an estimated 350-700 metric tons was discarded in the San Pedro Basin between 1947 and 1961. A lack of primary historical documents from Montrose Chemical or California Salvage Company that specify the DDT acid waste disposal method has contributed to the ambiguity surrounding whether the dumping method was via bulk discharge or containerized units. Barrels and debris visually detected during previous surveys by Remotely Operated Vehicles (ROVs) Jason and SuBastian and AUV Sentry served as the basis for ground truth testing and object classification using size and acoustic intensity characteristics. Target detection and classification algorithms were developed using image and signal processing techniques that resulted in the identification of over 74,000 debris targets within the survey region. Statistical, spectral, and machine learning techniques are used to characterize seabed variability and for bottom-type classification. These analytical techniques combined with the survey capabilities of AUVs provide a framework for efficient mapping and characterization of uncharted deep-water disposal sites.

California↗
USGS2021

Profiling lunar dust dissolution in aqueous environments: The design concept

Published studies and internal NASA reports indicate that when native lunar dust is suspended in an aqueous solution a variety of metal and other ions are released. This release has implications for future lunar missions, ranging from effects on mission hardware, effects on life support systems, possible direct effects on human health, and effects on research experiments such as plant growth experiments, space biology experiments and any activities that may involve the use of water sourced from the lunar poles. Furthermore, such contaminants could become concentrated or chemically altered to a more hazardous form during a variety of lunar mission activities, including everything from space suit cleaning to lunar industrial materials extraction. The exact profile of the release of ions from lunar dust and the nature of the partially dissolved particles has not been explored. Any model of this dissolution must be based on an understanding of the unique micromorphology of lunar dust, including its glassy nature, agglutinate features, high surface area and the presence of small deposits of elemental iron (nanophase iron) located near the surface of the grain particles. Dust has a very high surface area available for interaction with water. For this reason, on first exposure to water, an immediate pulsed release of ions could occur, with more prolonged release taking place over months or years. The few studies that have been conducted previously have been limited in both the time scales examined and in the selection of ions that were measured. The proposed investigation is a comprehensive materials science investigation, using the most modern analytical tools to catalogue all metals given off from lunar dust in various aqueous solutions and their time profiles of release from the very short term to the very long term. The product of the proposed study will be a comprehensive database determined from NASA curated samples collected from the Apollo landing sites that can be applied to research in both living systems and non-living systems on the moon. The methods developed in the proposed study will also establish standards for analysis of lunar dust samples returned from future manned missions (Artemis and others) and future robotic missions. The knowledge gained from this basic materials science investigation will have broad impact on the design of engineered human safety and health systems.

Acta Astronautica↗
USGS2001

The effects of large-scale pumping and diversion on the water resources of Dane County, Wisconsin

Throughout many parts of the U.S., there is growing concern over the effects of rapid urban growth and development on water resources. Ground- water and surface-water systems (which comprise the hydrologic system) are linked in much of Wisconsin, and ground water can be utilized both for drinking water and as a source of water for sustaining lakes, streams, springs, and wetlands. Ground water is important for surface-water systems because it commonly has greater dissolved solids and more acid-neutraliz- ing capacity than surface water or precipitation. The supplies of ground water are finite, however, and, in many cases ground water used for one purpose cannot be used for another. Moreover, ground-water use and withdrawal patterns may not be easy to alter once established. Thus, urban and rural planners are faced with decisions that balance the need for ground- water withdrawals while maintaining the quantity and quality of ground water for sustaining surface-water resources. Science-based information on the ground-water system and the connections to surface-water systems provides valuable insight for such decisions.

Wisconsin↗
USGS2008

EAARL coastal topography–Northeast Barrier Islands 2007: First surface

These remotely sensed, geographically referenced elevation measurements of Lidar-derived first surface (FS) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the northeast coastal barrier islands in New York and New Jersey, acquired April 29-30 and May 15-16, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

New York↗
USGS2008

EAARL coastal topography– Northeast barrier islands 2007: Bare earth

These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) topography were produced collaboratively by the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the northeast coastal barrier islands in New York and New Jersey, acquired April 29-30 and May 15-16, 2007. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is routinely used to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

New York↗
USGS2015

Flood-inundation maps for the Tippecanoe River at Winamac, Indiana

Digital flood-inundation maps for a 6.2 mile reach of the Tippecanoe River at Winamac, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 03331753, Tippecanoe River at Winamac, Ind. Current conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/in/nwis/uv?site_no=03331753 . In addition, information has been provided by the USGS to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system ( http://water.weather.gov/ahps/ ). The NWS AHPS forecasts flood hydrographs at many sites that are often collocated with USGS streamgages, including the Tippecanoe River at Winamac, Ind. NWS AHPS forecast peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation and forecasts of flood hydrographs at this site. For this study, flood profiles were computed for the Tippecanoe River reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relations at the Tippecanoe River streamgage, in combination with the current (2014) Federal Emergency Management Agency flood-insurance study for Pulaski County. The calibrated hydraulic model was then used to determine nine water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to the highest stage of the current stage-discharge rating curve. The 1-percent annual exceedance probability (AEP) flood stage (flood with recurrence intervals within 100 years) has not been determined yet for this streamgage location. The rating has not been developed for the 1-percent AEP because the streamgage dates to only 2001. The simulated water-surface profiles were then used with a geographic information system (GIS) digital elevation model (DEM, derived from Light Detection and Ranging [lidar]) in order to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage 03331753, Tippecanoe River at Winamac, Ind., and forecast stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for post-flood recovery efforts.

Indiana↗
USGS2008

Enhancing The National Map Through Tactical Planning and Performance Monitoring

Tactical planning and performance monitoring are initial steps toward improving 'the way The National Map works' and supporting the U.S. Geological Survey (USGS) Science Strategy. This Tactical Performance Planning Summary for The National Map combines information from The National Map 2.0 Tactical Plan and The National Map Performance Milestone Matrix. The National Map 2.0 Tactical Plan is primarily a working document to guide The National Map program's execution, production, and metrics monitoring for fiscal years (FY) 2008 and 2009. The Tactical Plan addresses data, products, and services, as well as supporting and enabling activities. The National Map's 2-year goal for FY 2008 and FY 2009 is to provide a range of geospatial products and services that further the National Spatial Data Infrastructure and underpin USGS science. To do this, the National Geospatial Program will develop a renewed understanding during FY 2008 of key customer needs and requirements, develop the infrastructure to support The National Map business model, modernize its business processes, and reengineer its workforce. Priorities for The National Map will be adjusted if necessary to respond to changes to the project that may impact resources, constrain timeframes, or change customer needs. The supporting and enabling activities that make it possible to produce the products and services of The National Map will include partnership activities, improved compatibility of systems, outreach, and integration of data themes.

Fact Sheet↗
USGS1974

Measurement in a marine environment using low cost sensors of temperature and dissolved oxygen

Continuous records of physical parameters of the marine environment are difficult as well as expensive to obtain. This paper describes preliminary results of an investigative program with the purpose of developing low cost time integrating measurement and averaging devices for water temperature and dissolved oxygen. Measurements were made in an estuarine area of the Chesapeake Bay over two week periods. With chemical thermometers average water temperature for the two week period was found to be equal to average water temperature measured with thermocouples plus or minus 1.0 C. The slow diffusion of oxygen through the semipermiable sides of plastic bottles permitted the use of water filled bottles to obtain averaged oxygen measurements. Oxygen measurements for two week averaging times using 500 ml polyethylene bottles were found to vary from conventionally measured and averaged dissolved oxygen by about 1.8 mg/l.

Chesapeake Bay↗
USGS2014

EAARL-B coastal topography: Fire Island, New York, pre-Hurricane Sandy, 2012: seamless (bare earth and submerged)

These remotely sensed, geographically referenced elevation measurements of lidar-derived seamless (bare-earth and submerged) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida. This project provides highly detailed and accurate datasets for part of Fire Island, New York, acquired pre-Hurricane Sandy on October 27, 2012. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar, known as the second-generation Experimental Advanced Airborne Research Lidar (EAARL-B), was used during data acquisition. The EAARL-B system is a raster-scanning, waveform-resolving, green-wavelength (532-nm) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL-B sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, down-looking red-green-blue (RGB) and infrared (IR) digital cameras, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL-B platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL-B system. The resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed originally in a NASA-USGS collaboration. The exploration and processing of lidar data in an interactive or batch mode is supported using ALPS. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. The Airborne Lidar Processing System (ALPS) is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

New York↗
USGS2016

Land cover changes associated with recent energy development in the Williston Basin; Northern Great Plains, USA

The Williston Basin in the Northern Great Plains has experienced rapid energy development since 2000. To evaluate the land cover changes resulting from recent (2000 – 2015) development, the area and previous land cover of all well pads (pads) constructed during this time was determined, the amount of disturbed and reclaimed land adjacent to pads was estimated, land cover changes were analyzed over time for three different well types, and the effects from future development were predicted. The previous land cover of the 12,990 ha converted to pads was predominately agricultural (49.5%) or prairie (47.4%) with lesser amounts of developed (2.3%), aquatic (0.5%), and forest (0.4%). Additionally, 12,121 ha have likely been disturbed and reclaimed. The area required per gas well remained constant through time while the land required per oil well increased initially and then decreased as development first shifted from conventional to unconventional drilling and then to multi-bore pads. For non-oil-and- gas wells (i.e. stratigraphic test wells, water wells, injection wells, etc.), the area per well increased through time likely due to increased produced water disposal requirements. Future land cover change is expected to be 2.7 times greater than recent development with much of the development occurring in five counties in the core Bakken development area. Direct land cover change and disturbance from recent and expected development are predicted to affect 0.4% of the landscape across the basin; however, in the core Bakken development area, 2.3% of the landscape will be affected including 2.1% of the remaining grassland. Although future development will result in significant land cover change, evolving industry practices and proactive siting decisions, such as development along energy corridors and placing pads in areas previously altered by human activity, have the potential to reduce the ecological effects of future energy development in the Williston Basin.

Williston Basin↗
USGS2024

Predicting redox conditions in groundwater at a national scale using random forest classification

Redox conditions in groundwater may markedly affect the fate and transport of nutrients, volatile organic compounds, and trace metals, with significant implications for human health. While many local assessments of redox conditions have been made, the spatial variability of redox reaction rates makes the determination of redox conditions at regional or national scales problematic. In this study, redox conditions in groundwater were predicted for the contiguous United States using random forest classification by relating measured water quality data from over 30,000 wells to natural and anthropogenic factors. The model correctly predicted the oxic/suboxic classification for 78 and 79% of the samples in the out-of-bag and hold-out data sets, respectively. Variables describing geology, hydrology, soil properties, and hydrologic position were among the most important factors affecting the likelihood of oxic conditions in groundwater. Important model variables tended to relate to aquifer recharge, groundwater travel time, or prevalence of electron donors, which are key drivers of redox conditions in groundwater. Partial dependence plots suggested that the likelihood of oxic conditions in groundwater decreased sharply as streams were approached and gradually as the depth below the water table increased. The probability of oxic groundwater increased as base flow index values increased, likely due to the prevalence of well-drained soils and geologic materials in high base flow index areas. The likelihood of oxic conditions increased as topographic wetness index (TWI) values decreased. High topographic wetness index values occur in areas with a propensity for standing water and overland flow, conditions that limit the delivery of dissolved oxygen to groundwater by recharge; higher TWI values also tend to occur in discharge areas, which may contain groundwater with long travel times. A second model was developed to predict the probability of elevated manganese (Mn) concentrations in groundwater (i.e., ≥50 μg/L). The Mn model relied on many of the same variables as the oxic/suboxic model and may be used to identify areas where Mn-reducing conditions occur and where there is an increased risk to domestic water supplies due to high Mn concentrations. Model predictions of redox conditions in groundwater produced in this study may help identify regions of the country with elevated groundwater vulnerability and stream vulnerability to groundwater-derived contaminants.

contiguous United States↗
USGS1985

Comparisons of spawning areas and times for two runs of chinook salmon ( Oncorhynchus tshawytscha ) in the Kenai River, Alaska

From 1979 to 1982,188 chinook salmon ( Oncorhynchus tshawytscha ) were tagged with radio transmitters to locate spawning areas in the glacial Kenai River, southcentral Alaska. Results confirmed that an early run entered the river in May and June and spawned in tributaries, and a late run entered the river from late June through August and spawned in the main stem. Spawning peaked during August in tributaries influenced by lakes, but during July in other tributaries. Lakes may have increased fall and winter temperatures of downstream waters, enabling successful reproduction for later spawning fish within these tributaries. This hypothesis assumes that hatching and emergence can be completed in a shorter time in lake-influenced waters. The time of upstream migration and spawning (mid- to late August) of the late run is unique among chinook stocks in Cook Inlet. This behavior may have developed only because two large lakes (Kenai and Skilak) directly influence the main-stem Kenai River. If run timing is genetically controlled, and if the various components of the two runs are isolated stocks that have adapted to predictable stream temperatures, there are implications for stock transplantation programs and for any activities of man that alter stream temperatures.

Alaska↗
USGS2026

Resources to inform the 2026 Colorado Climate Preparedness Roadmap: Compound hazards and associated public health implications

Changing environmental conditions are increasing the frequency and severity of extreme weather and environmental hazards, including heat waves, wildfires, drought, reduced water quality, and degraded air quality from ozone (O3) and fine particulate matter pollution (AghaKouchak et al., 2020; Bolinger et al., 2024; Colorado Health Institute, 2023a; Fann et al., 2015; IPCC, 2023a; Nagamoto et al., 2024; Nolte et al., 2018, 2021; Zscheischler et al., 2020). Strong scientific evidence indicates that climate change will increase risks to public health and safety throughout the 21st century, particularly through compound climate events (AghaKouchak et al., 2020; Cascio, 2018; Childs et al., 2022; Ebi, 2025; IPCC, 2023a, 2023b; Ma et al., 2024; Marlier et al., 2026; National Academy of Medicine, 2025; Reid et al., 2016; Reid & Maestas, 2019; Simpson et al., 2023; van den Hurk et al., 2023; Volckens, 2024; Zscheischler et al., 2018, 2020). Compound hazards, which are co-occurring or sequential hazards such as heat waves occurring alongside drought, wildfire, and poor air quality from smoke, can amplify public health risks beyond the effects of individual hazards alone (Marlier et al., 2026; Zscheischler et al., 2020). In Colorado, compound climate events with clear implications for public health are already evident (see “Core definitions” section for additional context on compound climate events). Recent statewide assessments have documented increasing heat waves, drought, and wildfires linked to rising temperatures, while emerging data show that climate change is reversing decades of air quality improvements through increased O3 and fine particulate matter pollution due to wildfire, and increased aerosolized topsoil (i.e., dust) due to drought (Bolinger et al., 2024; Childs et al., 2022; Fann et al., 2015; Ghanbari et al., 2023; Larsen et al., 2022; Nolte et al., 2018, 2021; Volckens, 2024). These environmental shifts are associated with increases in eye and kidney-health related concerns, heat-related illness, exacerbations of asthma and other respiratory conditions, increased risk of infectious disease, cardiovascular stress, and mental health impacts, with disparities in risk for children, older adults, outdoor workers, and communities with existing health and economic vulnerabilities (Baraghoshi et al., 2023; Butler-Dawson et al., 2026; Cascio, 2018; Cleland et al., 2022; Colorado Health Institute, 2023a; Grover et al., 2024; Lee et al., 2023; Ma et al., 2024; Macaluso et al., 2024; Marlier et al., 2026; National Academy of Medicine, 2025; Patnaik et al., 2024; Peters et al., 2019; Reid et al., 2016; Reid & Maestas, 2019). The state is actively pursuing strategies to mitigate the risks of these compound climate events on the public, including expanding climate and health surveillance, strengthening early-warning systems and public communication around smoke and air quality, and developing integrated policy agendas that link climate mitigation, adaptation, and health equity (CDPHE, 2025; Colorado Health Institute, 2023b; Zemaitis & Bailey, 2024). For example, state and partner organizations have articulated cross-sector goals to prepare for health impacts related to extreme heat, wildfires, flooding, drought, declines in water quality, and poor air quality, including updating workplace safety protocols, enhancing community-based resilience, adapting clinical care assessments to include climate-related stressors, and improving access to mental and behavioral health services following climate-related disasters (Colorado Health Institute, 2023b; CDPHE, 2025; Zemaitis & Bailey, 2024). To better prepare for current risks and make informed decisions, more information is needed, including methods to analyze historical and projected conditions in near real time, characterize interactions among compound hazards, and translate climate and air quality science into actionable guidance for public health agencies, health care systems, and communities across Colorado (Ebi, 2025; Marlier et al., 2026; National Academy of Medicine, 2025; Simpson et al., 2023; Zscheischler et al., 2018). For this report, we focus on extreme heat and outdoor air quality (ozone [O3] and fine particulate matter [PM2.5]) as the main compound hazards causing compound climate events, given that 1) the state of Colorado has experienced poor air quality for some time, 2) these climate events are affecting large population numbers, and 3) there is capacity to consider and respond to these climate-driven events.

Colorado↗
USGS2018

Potential toxicity of dissolved metal mixtures (Cd, Cu, Pb, Zn) to early life stage white sturgeon (Acipenser transmontanus) in the Upper Columbia River, Washington, United States

The Upper Columbia River (UCR) received historical releases of smelter waste resulting in elevated metal concentrations in downstream sediments. Newly hatched white sturgeon hide within the rocky substrate at the sediment–water interface in the UCR for a few weeks before swim-up. Hiding behavior could expose them to metal contaminants, and metal toxicity could contribute to population declines in white sturgeon over the past 50 years. This study evaluates whether there is a link between the toxicity of dissolved metals across the sediment-water interface in the UCR and the survival of early life stage (ELS) white sturgeon. Toxicity of dissolved metal mixtures is evaluated using a combination of previously collected laboratory and field data and recently developed metal mixture toxicity models. The laboratory data consist of individual metal (Cd, Cu, Pb, and Zn) toxicity studies with ELS white sturgeon. The field data include the chemical composition of surface and pore water samples that were collected across the sediment–water interface in the UCR. These data are used in three metal accumulation and two response models. All models predict low toxicity in surface water, whereas effects concentrations greater than 20% are predicted for 60–72% of shallow pore water samples. The flux of dissolved metals, particularly Cu, from shallow pore water to surface water likely exposes prime ELS sturgeon habitat to toxic conditions.

Washington↗